Search Results

Search found 19921 results on 797 pages for 'big ip'.

Page 109/797 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Static IP on Wi-Fi at work and dynamic at home?

  - by Jason Shultz

  I need the laptops at my office to have a static IP for security purposes and identification. However, some employees take their laptops home in the evening. If I have the Wi-Fi configuration set to use a static IP, how can they have a dynamic IP at home? The laptops are using Windows Vista and Windows 7.

  Read the article

• Static IP address on Wi-Fi at work and dynamic at home?

  - by Jason Shultz

  I need the laptops at my office to have a static IP address for security purposes and identification. However, some employees take their laptops home in the evening. If I have the Wi-Fi configuration set to use a static IP address, how can they have a dynamic IP address at home? The laptops are using Windows Vista and Windows 7.

  Read the article

• Intermittent 403 errors when using allow to limit access to url with both explicit IP and SetEnvIf

  - by rbieber

  We are running Apache 2.2.22 on a Solaris 10 environment. We have a specific URL that we want to limit access to by IP. We recently implemented a CDN and now have the added complexity that the IP's that a request are shown to be coming from are actually the CDN servers and not the ultimate end user. In the case that we need to back the CDN out, we want to handle the case where either the CDN is forwarding the request, or the ultimate client is sending the request directly. The CDN sends the end user IP address in an HTTP header (for this scenario that header is called "User-IP"). Here is the configuration that we have put in place: SetEnvIf User-IP (\d+\.\d+\.\d+\.\d+) REAL_USER_IP=$1 SetEnvIf REAL_USER_IP "(10\.1\.2\.3|192\.168\..+)" access_allowed=1 <Location /uri/> Order deny,allow Allow from 10.1.2.3 192.168. allow from env=access_allowed Deny from all </Location> This seems to work fine for a time, however at some point the web server starts serving 403 errors to the end user - so for some reason it is restricting access. The odd thing is that a bounce of the web server seems to resolve the issue, but only for a time - then the behavior comes back. It might be worthwhile to note as well that this URL is delegated to a JBoss server via mod_jk. The denial of access is, however; confirmed to be at the Apache layer and the issue only seems to happen after the server has been running for some time.

  Read the article

• Trace IP Adress in Wordpress

  - by Ajith

  I need to trace the ipadress (where my website access)for optional loading of my theme.Explanation: I want to add a share link to twitter and facebok in my application.i think in some countries like china;twitter blocked.Thats why i need to check from where my site is accessing.otherwise which affecting my site's performance.How can we solve this problem in PHP.If anybody have experience please help me..

  Read the article

• How can I block access to public server IP for OpenSSH in Debian?

  - by VanDerSpar

  I got a Debian server with a public and a private IP in a DMZ. I need to be able to connect to it through SSH on our private side, and then block all access to the public address. Both /etc/hosts.deny and sshd_config seems to only let one block incoming IP addresses. What I really want is to disable SSH connections for the public IP. I've been trying iptables, but I haven't had luck with that neither. Any help is appreciated.

  Read the article

• Lightest weight ubuntu desktop for text editing in big terminal windows?

  - by Kevin Pauli

  I have an older windows laptop onto which I'm installing ubuntu within a VM. My goal is just to use terminal-based linux tools such as vim and shell scripting. I don't give a hoot about any gui for this box. So I first installed ubuntu minimalcd and chose "Basic Ubuntu Server". Upon boot, the text-based terminal came up and I logged in, but the problem is it only gives me 80 columns. I want to do terminal mode vim but have a couple hundred columns to take advantage of my large monitor. If you happen to know how to do that, please see my question here . This post is assuming that the other question is not answerable, and that I will need a desktop to get more than 80 columns in a terminal window. So if that is the case, I want the lightest weight one possible, because this is older hardware and all I want is the ability to have nice big text-based terminal windows for editing text. From the ubuntu minimal CD, I see options for Edubuntu, Kubuntu, etc. Which one of the available desktops would be a good choice for my needs?

  Read the article

• My Big Break - this is my story and I am sticking to it ;)

  - by dbasnett

  The value of undertaking new and difficult tasks can have many wonderful consequences, don't you agree? Here is the story of my big break. Remember yours? During the mid 70's I was in the Navy and worked as a computer operator at the CNO's Command and Control computer system (WWMCCS) in the Washington Navy Yard. I was a tape ape, but knew that I wanted to be a systems programmer. One day the Lieutenant in charge of the OS group was running a test that required the development system to be re-booted, and I was politely hinting that I wanted out of computer operations. As he watched the accounting tape rewind to BOT and then search for where it had just been (severalminutes) he told me if I would fix "that" he would have me transferred. I couldn't say "Deal" fast enough. Up until then my programming experience had been on Edsger Dijkstra's favorite computer (sic), an IBM 1620. It took almost 6 months of learning the assembler for the Honeywell 6000 and finding the code responsible for rewinding the tape and then forwarding it. After much trial and error at o’dark thirty I succeeded. The tape barely moved and my “patch” was later adopted by many other sites. Lieutenant Jack Cowan kept his promise and I have gone on to have a varied and enjoyable career. To Jack, and the rest of the crew (Ken, Stu, Neil, Tom, Silent W, Mr. Jacobs, Roy, Rocco, etc.) I’d like to thank you all.

  Read the article

• How to mange big amount users at server side?

  - by Rami

  I built a social android application in which users can see other users around them by gps location. at the beginning thing went well as i had low number of users, But now that I have increasing number of users (about 1500 +100 every day) I revealed a major problem in my design. In my Google App Engine servlet I have static HashMap that holding all the users profiles objects, currenty 1500 and this number will increase as more users register. Why I'm doing it Every user that requesting for the users around him compares his gps with other users and check if they are in his 10km radius, this happens every 5 min on average. That is why I can't get the users from db every time because GAE read/write operation quota will tare me apart. The problem with this desgin is As the number of users increased the Hashmap turns to null every 4-6 hours, I thing that this time is getting shorten but I'm not sure. I'm fixing this by reloading the users from the db every time I detect that it became null, But this causes DOS to my users for 30 sec, So I'm looking for better solution. I'm guessing that it happens because the size of the hashmap, Am I right? I have been advised to use spatial database, but that mean that I can't work with GAE any more and that mean that I need to build my big server all over again and lose my existing DB. Is there something I can do with the existing tools? Thanks.

  Read the article

• Rendering a big game universe - bitmaps or vector graphics?

  - by user1641923

  I am new to an Android development, though I have much experience with Java, C++, PHP programming and a bit experience with vector graphics too (basic 3d Studio Max, Flash, etc). I am starting to work on an Android game. It is going to be a 2D space shooter/RPG, and I am not going to use any game engines and any 3D party libs. I really want to create a very large game universe, or even pseudo-infinite (without visible borders, as if it were a 2D projection of a sphere). It should include 10-12 clusters of 7-8 planets/other space objects and random amount of single asteroids/comets, which player can interact with and also not interactive background. I am looking for a least complicated aproach to create such a universe. My current ideas are: Simply create bitmaps with space scenery background so that they can be tiled seamlessly repeated and construct my 2D universe of this tiles, then place interactive objects (planets, other spaceships) on it. Using vector graphics. I would have a solid color background, some random background objects and gradients here and there. My problems here: Lack of knowledge of how well vector graphics is integrated in Android. Performance? Memory usage? Does Android manage big bitmaps well? Do all of the bitmaps have to be in memory during all game process? I am interested in technical details regarding each of the ideas and a suggestion, which I should go with.

  Read the article

• First Project a big one, How much should we charge?

  - by confuzzled

  Two of my cousins and I started a freelance computer repair/web design business just to make some money on the side during college, and received our first major web design project about three weeks ago. Now we've created websites before, but it was mostly for family businesses and have never really charged money, and most of the websites have been static, and don't really require a CMS. This project, however, was a big one (for us anyways). We created a news site that had several categories, we created the banners, we created a classifieds page (not a web app just something static that they control). Several links, a few graphical assets, CSS drop down menu, RSS feed from a different news site, weather, all the normal stuff you would find on a regular news site. On top of that we put in all the usual Joomla stuff (search, Jcomments, Jslide pictures, JCE, etc.). Then we uploaded the first 10 articles they gave us, and we are going to train them how to use Joomla. Now, at first we decided for 700 dollars. I assumed they just wanted a simple blog like website where they can upload articles. But then we had a meeting, and they asked for a lot more. Note: we did not hard code the template from scratch, but customized the gantry framework to fit their needs. We did code quite a bit however. I estimate that we put in about 50-60 hours in total. I'm wondering if 700 dollars is a bit low, this price is definitely not set in stone. Please keep in mind that this is our first project, and we are newbies, please be kind. Thank You!

  Read the article

• Facebook - Isn't this a big vulnerability risk for users? (After Password Change)

  - by Trufa

  I would like to know you opinions as programmers / developers. When I changed my Facebook password yesterday, by mistake I entered the old one and got this: Am I missing something here or this is a big potencial risk for users. In my opinion this is a problem BECAUSE it is FaceBook and is used by, well, everyone and the latest statistics show that 76.3% of the users are idiots [source:me], that is more that 3/4!! All kidding aside: Isn't this useful information for an attacker? It reveals private information about the user! It could help the attacker gain access to another site in which the user used the same password Granted, you should't use use the same password twice (but remember: 76.3%!!!) Doesn't this simply increase the surface area for attackers? It increases the chances of getting useful information at least. In a site like Facebook 1st choice for hackers and (bad) people interested in valued personal information shouldn't anything increasing the chance of a vulnerability be removed? Am I missing something? Am I being paranoid? Will 76.3% of the accounts will be hacked after this post? Thanks in advance!! BTW if you want to try it out, a dummy account: user: [email protected] (old) password: hunter2

  Read the article

• Client/Server game even in solo: any big problem?

  - by Klaim

  I'm making a game which have strong basic design based on multiplayer but also should provide a really interesting and self-sufficient solo game. A bit like a real-time strategy game. The events and actions taken shouldn't be as massive and immediate as in a FPS, so you can also think the networking like for an RTS. It's a PC game, targetting Windows, MacOSX and Linux (Ubuntu & Fedora). It's programmed in C++, using a variety of open source libraries, so I have great (potential) control over the performances. So far I always considered that just making the game work with two applications, client & server, even in solo mode was ok. However, as I'm in the process of starting the network code I'm having doubts about if it's a good idea. I'm not a specialist so I might be missing something in my analysis. I see these pros and cons: Pros: The game works only one way so if I fix a bug it should apply on all game modes, whatever the distance with the server is; Basic networking issues would be detected early, including behaviour with the protection softwares (firewall) installed (i am not specialist so this might be wrong); Cons: I suppose that even if it should be really fast enough, networking client and server on the same computer would still be slower than no networking and message passing in (one) process memory. Maybe debugging would be more difficult? I don't have experience in this case but so far I assume that debugging with Visual Studio allows me to debug multiple process so it shouldn't be really different. Also, remote debugging. My question is: is there a big disadvantage that I missed? Or maybe there are advantages that I missed and that should encourage me to just continue with only client-server game sessions?

  Read the article

• How do I set up a virtual network interface with its own IP address?

  - by Stefano Palazzo

  I vaguely remember that it's possible to set up virtual network interfaces with their own IP addresses, using only one physical network connection. I can find a few guides on the internet that recommend setting these up in /etc/network/interfaces, but Ubuntu doesn't use this file. Therefore my question: What's the correct way of setting these up in recent versions of Ubuntu? As this is a laptop, and I need it to connect to all kinds of different networks, I want to keep the network manager and all its configuration. To be more clear: at the end of this, I want to have a new network interface (e.g. "eth42") with its own IP address, but using whatever is connected in network manager to send the actual packets. In NM, it should appear as if I just had a second ethernet adapter installed in my system.

  Read the article

• A big flat text file or a HTML site for language documentation?

  - by Bad Sector

  A project of mine is a small embeddable Tcl-like scripting language, LIL. While i'm mostly making it for my own use, i think it is interesting enough for others to use, so i want it to have a nice (but not very "wordy") documentation. So far i'm using a single flat readme.txt file. It explains the language's syntax, features, standard functions, how to use the C API, etc. Also it is easy to scan and read in almost every environment out there, from basic text-only terminals to full-fledged high-end graphical desktop environments. However, while i tried to keep things nicely formatted (as much as this is possible in plain text), i still think that being a big (and growing) wall of text, it isn't as easy on the eyes as it could be. Also i feel that sometimes i'm not writing as much as i want in order to avoid expanding the text too much. So i thought i could use another project of mine, QuHelp, which is basically a help site generator for sites like this one with a sidebar that provides a tree of topics/subtopics and offline full text search. With this i can use HTML to format the documentation and if i use QuHelp for some other project that uses LIL, i can import LIL's documentation as part of the other project's documentation. However converting the existing documentation to QuHelp/HTML isn't a small task, especially when it comes to functions (i'll need to put more detail on them than what currently exists in the readme.txt file). Also it loses the wide range of availability that it currently has (even if QuHelp's generated code degrades gracefully down to console-only web browsers, plain text is readable from everywhere, including from popular editors such as Vim and Emacs - i had someone once telling me that he likes LIL's documentation because it is readable without leaving his editor). So, my question is simply this: should i keep the documentation as it is now in the form of a single readme.txt file or should i convert it to something like the site i mentioned above? There is also the option to do both, but i'm not sure if i'll be able to always keep them in sync or if it is worth the effort. After asking around in IRC i've got mixed answers: some liked the wide availability of the single text file, others said that it is looks as bad as a man page (personally i don't mind that - i can read man pages just fine - but other people might have issues reading them). What do you think?

  Read the article

• Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

  - by Donal

  I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

  Read the article

• Is multiple domain names and links from same IP causing poor search engine rankings?

  - by John

  I have an ecommerce website which is not doing so well in Google. I am trying to improve this of course, and am looking at some possibilities for why it isn't doing well. The website has four domain names, all of which have been indexed by Google. A few months ago I applied 301 redirects to any requests for two of the domain names so now it is down to two domain names (one is a .net, the other is a .com.au, the others were .net.au and .com). I prefer to use my main domain name (the .com.au), but one of the names has been around for a long time and has more inbound links. According to a PageRank tool, both are PR2. It is a Classic ASP site and up until recently had a lot of querystring parameters. In the last week or so I added URL rewriting so there is now no parameters for most pages. I don't do 301 redirects from the old URLs but instead I add the META canonical tag indicating the preferred new URL. At the same time I redesigned the site and improved title tags, META descriptions, and H tags but it hasn't been long enough yet for Google to index many of these yet. I also looked at what pages Google has indexed and strangely it has some strange pages in the index, there are a lot of pages which are actual keyword searches (more a bunch of random letters than an actual word). What I mean is that it is as if they had typed in something to search for in my search box - there are no links to pages like this and the only way of getting this is to type something in to the search box). So I added a META robots tag with noindex,nofollow anytime that I render pages like this. Years ago I set up a fake price comparison site which lists all my products and links back to my site. It has a different keyword rich domain name but is on the same server and same IP address. It's a completely different layout but does have the same product categories and product descriptions (although I have stripped formatting out of them so they are not identical except in text). I also have a few blog sites which again are on the same server/IP and all have advertising for the website. My questions are: What should I do with the multiple domains, just use one, or continue with two or more? Should I add 301 redirects, not just the META canonical tag? Any idea about Google indexing my search results page, and did I do the right thing with the META robots tag? Is the fake price comparison site likely to be causing problems? Are all the links to the site from other domain names but the same IP address likely to be causing problems? Thanks for any help. Sorry for so many questions in one.

  Read the article

• Google se lance encore un peu plus dans la voix sur IP et la vidéo-conférence, au moment où Skype so

  Mise à jour du 19/05/10 Google se lance dans la voix sur IP et la vidéo-conférence Au moment où Skype sort la nouvelle version de son application Les deux faits ne sont pas liés, mais ils montrent que la voix sur Internet (VoIP) au sens large est un secteur en plein devenir. Après Gizmo5 (lire ci-avant), Google vient en effet de lancer une Offre Publique d'Achat (OPA) sur une société norvégienne spécialisée dans la « transmission du son et de la vidéo en temps réel » sur Internet. La définition d'une technologie qui fait furieusement penser à Skype. La direction de Global IP Solutions a d'ores et déjà annoncé qu'...

  Read the article

• Why would i need extra IP adresses from my web host?

  - by user4524

  I am moving to a new and cheaper host. My old one raised the prices suddenly by a factor 10. Now what I did not like about the old one, was that each time I set up a new website, I had to set up a new account, with the result that I have to pay for a lot of webspace and a lot of bandwith i don't use. Now I am moving over to a new host, who cheaply offers virtual servers. Now I am a n00b when it comes to server tech. I have two questions about this: 1. Could I install all my webistes on this virtual server, provided it is big enough? 2. They offer the possibility of getting more than one IP address, but it costs more. What would be the advantage of this? Would I be able to suffice with one IP address?

  Read the article

• La CNIL autorise les premiers ayants droits à collecter des adresses IP, la machine Hadopi se met en

  Mise à jour du 14.06.2010 par Katleen La CNIL autorise les premiers ayants droits à collecter des adresses IP, la machine Hadopi se met en marche Quelques semaines après la mise en place de l'équipe chargée de la mettre en oeuvre, la loi Hadopi semble prête à décoller. La CNIL (Commission nationale informatique et libertés) viendrait en effet d'autoriser les premiers ayants droits à collecter de manière automatisée les adresses IP d'utilisateurs soupçonnés de téléchargement illégal. Ceci leur permettra de ficher les contrevenants présumés pour ensuite en avertir Hadopi. Concrètement, c'est la société Trident Media Guard qui sera seule habilitée à collecter ces adresses pour le...

  Read the article

• Cisco ASA not forwarding traffic from one interface to another

  - by Antoine Benkemoun

  Hello ServerFault, I am needing help in the configuration process of my Cisco ASA 5510. I have set up 4 Cisco ASA interconnected together via a big LAN. Each Cisco ASA has 3 or 4 LANs attached to them. The IP routing part is taken care of by OSPF. My problem is on another level. A computer connected to one of the LANs attached to an ASA has no problem communicating with the outside world. The outside world being anything "after" the ASA. My problem is that I am completely unable to have them communicate with another LAN connected to the same ASA. To rephrase this, I am unable to send traffic from one interface of a given ASA to another interface of the same ASA. My configuration is the following : ! hostname Fuji ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 10.0.0.2 255.255.255.0 no shutdown ! interface Ethernet0/1 speed 100 duplex full nameif cs4 no shutdown security-level 100 ip address 10.1.4.1 255.255.255.0 ! interface Ethernet0/2 speed 100 duplex full no shutdown ! interface Ethernet0/2.15 vlan 15 nameif cs5 security-level 100 ip address 10.1.5.1 255.255.255.0 ! interface Ethernet0/2.16 vlan 16 nameif cs6 security-level 100 ip address 10.1.6.1 255.255.255.0 ! interface Management0/0 speed 100 duplex full nameif management security-level 100 ip address 10.6.0.252 255.255.255.0 ! access-list nat_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list acl_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list nat_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list acl_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list nat_cs6 extended permit ip 10.1.6.0 255.255.255.0 any access-list acl_cs6 extended permit ip 10.1.6.0 255.255.255.0 any ! access-list nat_outside extended permit ip any any access-list acl_outside extended permit ip any 10.1.4.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.5.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.6.0 255.255.255.0 ! nat (outside) 0 access-list nat_outside nat (cs4) 0 access-list nat_cs4 nat (cs5) 0 access-list nat_cs5 nat (cs6) 0 access-list nat_cs6 ! static (outside,cs4) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs5) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs6) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 ! static (cs4,outside) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs5) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs6) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 ! static (cs5,outside) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs4) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs6) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 ! static (cs6,outside) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs4) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs5) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 ! access-group acl_outside in interface outside access-group acl_cs4 in interface cs4 access-group acl_cs5 in interface cs5 access-group acl_cs6 in interface cs6 ! router ospf 1 network 10.0.0.0 255.255.255.0 area 1 network 10.1.4.0 255.255.255.0 area 1 network 10.1.5.0 255.255.255.0 area 1 network 10.1.6.0 255.255.255.0 area 1 log-adj-changes ! There is nothing really complicated in this configuration. It just NATs from one interface to another and that's it. I have tried enabling same-security-traffic permit inter-interface but that doesn't help. I therefore must be missing something a little bit more complicated. Does anyone know why I cannot foward traffic from one interface to another ? Thank you in advance for your help, Antoine

  Read the article

• How to validate selects / inserts are hitting the right server with MySQL Master/Slave

  - by bwizzy

  I've got a rails app using the master_slave_adapter plugin (http://github.com/mauricio/master_slave_adapter/tree/master) to send all selects to a slave, and all other statements to the master. Replication is setup using Mysql master / slave. I'm trying to validate that all the SQL statements are indeed going to the right place. Selects to the slave (db2), inserts to the master (db1) but I'm not sure how to do it. I've tried using tcpdump on the webservers: sudo /usr/sbin/tcpdump -q -i eth0 dst port 3306 and this is the output for a page request with a ton of selects: 10:32:36.570930 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 0 10:32:36.576805 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 0 10:32:36.577201 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 0 10:32:36.577980 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 86 10:32:36.578186 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 21 10:32:36.578359 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 27 10:32:36.578522 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 5 10:32:36.578741 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 13 10:32:36.579611 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 29 10:32:36.588201 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 0 10:32:36.588323 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 0 10:32:36.588677 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 0 10:32:36.588784 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 86 It doesn't look like all the selects are going to the slave. Maybe this isn't the right way to test, anyone know a better way?

  Read the article

• How to better copy&paste big files over RDP?

  - by WebMAOhist

  Recently I was making a few attempts to copy&paste a big (1.2 GB) file to remote computer over RDP. The remote computer is virtual testing machine with MS Windows Server 2008 Datacenter. First I tried to copy&paste before midnight when the transfer speed was limited by client computer ISP to 100 kB/s. So, it required a few hours and I was forced to cancel transfer since remote desktop became too unresponsive and sluggish (slow). So, I re-started it over midnight when my local transfer speed is over 4 GB/s 4MB/s (sorry for typo). So, my impression is that independently on speed (broadband) of copy&paste transfer the remote computer becomes sluggish while copying over RDP. At the same time downloading from internet doesn't make remote host sluggish. AFAIU, it is because clipboard of remote computer and so its memory becomes overloaded by transfer. How can I control (restrict) the usage of clipboard for specific process (pasting of file)? What are the possible way to control it? Update: After reading that slow speed of transfer is caused by encryption used for copy&pasting over RDP and since I believe I am more interested in overall efficiency: both the time, or rapidness, of getting file as well as possibility to work without waiting, I changed the question title from: How to control the usage of remote desktop clipboard usage for pasting a big file? to How to better copy&paste big files over RDP? For example, is it better to copy&paste one huge (zip) archive or unzip it and copy paste a folder with unzipped files? And more exactly I wanted to ask: What are possible ways to improve overall experience: the speed of transfer (i.e. availability of needed file) responsiveness of remote host (making remote coputer available for work before completion of copy&pasting)?

  Read the article

• Is there a way to attach Ruby Net::HTTP request to a specific IP address / network interface?

  - by Dan Sosedoff

  Hello, Im looking a way to use different IP addresses for each GET request with standard Net::HTTP library. Server has 5 ip addresses and assuming that some API`s are blocking access when request limit per IP is reached. So, only way to do it - use another server. I cant find anything about it in ruby docs. For example, curl allows you to attach it to specific ip address (in PHP): $req = curl_init($url) curl_setopt($req, CURLOPT_INTERFACE, 'ip.address.goes.here'; $result = curl_exec($req); Is there any way to do it with Net::HTTP library? As alternative - CURB (ruby curl binding). But it will be the latest thing i`ll try. Suggestions / Ideas?

  Read the article

• NLB 2 Windows Server 2003 Servers

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

  Read the article

• Confusion about HSRP Groups

  - by Kyle Brandt

  If I have a router that has several LANs on it, and each of these LAN is attached to a second router, do I need to use different HSRP groups for each LAN? With this set up, each virtual gateway will be on a Layer 2 segment. And within a router, no interface will have multiple gateways. So, For example: Router 1: F0/0: ip address 192.168.1.2 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.2 255.255.255.0 standby ip 192.168.2.1 Router 2: F0/0: ip address 192.168.1.3 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.3 255.255.255.0 standby ip 192.168.2.1 Will this work, or do I need standby 1 ip 192.168.2.1 on the F2/0 interfaces? Since according to the RFC, the group number of the packet is in the HSRP multicast packets, my guess is that I don't need different groups, and that multiple groups are only needed when they are all on the same Layer 2 segment. However, I haven't been able to find this setup....

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >