Search Results

Search found 5712 results on 229 pages for 'card'.

Page 109/229 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • No audio with headphones, but audio works with integrated speakers

    - by Pedro
    My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

    Read the article

  • Healthcare and Distributed Data Don't Mix

    - by [email protected]
    How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

    Read the article

  • Ubuntu 12.04 / 12.10 Randomly Freezing - nVidia?

    - by Alix Axel
    My Ubuntu install frequently freezes, sometimes showing a black screen (not very common anymore - in my latest installs), some other times the mouse and keyboard just fail to move and respond (not even Ctrl + Alt + F1 works) and some other times I'm able to move the mouse with a huge delay (2-5 seconds) but I'm not able to do/click anything. I have a pretty strong feeling that this problem is related to my graphic card drivers because: after hard reset, I usually get error reports about X.org / jockey it's common for artifacts to appear during loading / shutdown / whenever, for instance: pattern filled with £ during log off ugly-colored squared pattern during boot windows that are partially moved (i.e.: only the top half) Firefox renderings that leave the bottom ~30% of the page black These artifacts appear right before the system freezes. I've installed Ubuntu 12.04 LTS and after several failed attempts to get my dual monitor setup to work properly I tried installing the new 12.10 version, hoping that this new version would have this problem solved... Unfortunatly, that was not the case, so I reverted to Ubuntu 12.04. I've tried all the drivers in the Additional Drivers application (even the experimental ones), I've also tried the nvidia-current package from the PPA repository ubuntu-x-swat/x-updates as well as the nouveau OSS driver. Nothing (except no driver at all with a 640*480 resolution) at all seems stable. Here is the info of my graphic card: alix@alix-E500:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8400M G] (rev a1) alix@alix-E500:~$ sudo lshw -C video [sudo] password for alix: *-display description: VGA compatible controller product: G86 [GeForce 8400M G] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fe0e0000-fe0fffff Right now, I don't even have my 22" monitor connected as I can't even get my laptop display to work properly and without freezes. I've searched, read and tried all that I could (over several fresh reinstalls) to fix the problem, but so far, no solution has proven definitive. I'm sorry I can't precise which symptom maps to each driver but I've been trying to solve this one on my own without logging what I'm doing, perhaps someone here will be able to point me to a certain-fix solution, if not I'll keep updating this question as I go along. Please let me know if any more info is needed to pinpoint the exact problem. Trying out NVIDIA accelerated graphics driver (version 173). The scrolling, minimizing / maximizing windows takes between 2 and 5 seconds to finalize. Context menus also pop up very slowly and the typing seems delayed by ~1 second. No critical issues so far. Firefox rendering of the Save Edits button is consistently messed up (random black lines in the top). Trying out NVIDIA accelerated graphics driver (version current) [Recommended]. All the delays mentioned above and the buggy rendering of the Save Edits button are gone, but I'm noticing that the whole screen flashes black for a couple of microseconds and while I was writing this test for the first time, the bottom 30% of the screen went black and I couldn't do anything (not even Ctrl + Alt + F1 would work). Had to force a hard reset. Also, the system hanged a little for a couple of seconds with the fade out of the "Restart" menu. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-304). Same symptoms as before, it crashed once while I was trying to install Chromium and again after a hard reset when I was trying to remove the driver. The bottom of the screen did not went black and I could move my mouse both times. Ctrl + Alt + F1 didn't work. The ugly-colored pattern also showed up during the second boot. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-307). The system crashed as soon as I clicked something. Had to do a fresh re-install. Trying out Nouveau: Accelerated Open Source driver for nVidia cards. Artifacts still show up during boot but other than that this one seems stable. As soon as I connected my second monitor, the responsiveness dropped a lot, animations and video are somewhat slow. I'm gonna try this solution http://askubuntu.com/a/98871/9018 later on.

    Read the article

  • InfoPath 2010 Form Design and Web Part Deployment

    - by JKenderdine
    In January I had the pleasure to speak at SharePoint Saturday Virginia Beach.  I presented a session on InfoPath 2010 forms design which included some of the basics of Forms Design, description of some of the new options with InfoPath 2010 and SharePoint 2010, and other integration possibilities.  Included below is the information presented as well as the solution to create the demo: First thing you need to understand is what the difference is between an InfoPath List form and a Form Library Form?  SharePoint List Forms:  Store data directly in a SharePoint list.  Each control (e.g. text box) in the form is bound to a column in the list. SharePoint list forms are directly connected to the list, which means that you don’t have to worry about setting up the publish and submit locations. You also do not have the option for back-end code. Form Library Forms:  Store data in XML files in a SharePoint form library.  This means they are more flexible and you can do more with them.  For example, they can be configured to save drafts and submit to different locations. However, they are more complex to work with and require more decisions to be made during configuration.  You do have the option of back-end code with these type of forms. Next steps: You need to create your File Architecture Plan.  Plan the location for the saved template – both Test and Production (This is pretty much a given, but just in case - Always make sure to have a test environment) Plan for the location of the published template Then you need to document your Form Template Design Plan.  Some questions to ask to gather your requirements: What will the form be designed to do? Will it gather user information? Will it display data from a data source? Do we need to show different views to different users? What do we base this on? How will it be implemented for the users? Browser or Client based form Site collection content type – Published through Central Admin Form Library – Published directly to form library So what are the requirements for this template?  Business Card Request Form Template Design Plan Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Show and hide fields as necessary for requirements Create multiple views – one for those submitting the form and another view for the executive assistants placing the orders. Browser based form integrated into SharePoint team site Published directly to form library The form was published through Central Administration and incorporated into the site as a content type. Utilizing the new InfoPath Web part, the form is integrated into the page and the users can complete the form directly from within that page. For now, if you are interested in the final form XSN, contact me using the Contact link above.   I will post soon with the details on how the form was created and how it integrated the requirements detailed above.

    Read the article

  • Ubuntu 12.04 - No sound - HELP!

    - by Bruno Tacca
    I'm panicking... my sound stopped working after I tried to set-up my notebook speakers, plus two headphone jacks... My idea was to multichannel the sound to 3 channels, built-in speakers, and sound-card 2 headphone jacks. After a couple efforts I did it with 2 channels, speakers and 1 headphone jack, but the other wasn't working. After more tries and tries, sound stop working. I just want my sound back... crying like a baby on the floor. And, if possible, but not necessary, a simple guide to active the 3 channels. xD I will post the diagnosis according to https://help.ubuntu.com/community/SoundTroubleshootingProcedure STEP 1 Did it, still no sound. STEP 2 Did it, still no sound. STEP 3 and #STEP 4 (I removed the log cause there is a limit of characters to be posted.) The log can be found here: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/238653 STEP 5 Rebooted, still no sound. STEP 6 Did it. In the Output Devices tab, nothing is muted. I play a music with the Rhythmbox Music Player, I don't hear anything but in the pavucontrol I can see in the Built-in Audio Analog Stereo a sound bar shaking... but, no sound. STEP 7 In alsamixer, AlsaMixer v1.0.25 Card: HDA Intel PCH Chip: Creative CA0132 information View: F3:[Playback] F4: Capture F5: All Item: Headphone [dB gain: 25.00, 25.00] Then, I have 5 columns Headphone, Speaker, PCM, S/PDIF, S/PDIF Default PCM A little weird when I try to mute the Headphone and the Speaker, here what happens: Starting both unmutted, mutting headphone cause speaker being mutted automaticaly. Starting both unmutted, mutting speaker cause headphone being mutted automaticaly. Starting both mutted, possible to unmute both separately. STEP 8 I cannot hear sound on both (headphone and/or speaker). STEP 9 Dual boot... Restarted, windows was with sound at max volume. Restarted again, still no sound at ubuntu. I heard something when ubuntu started, a little noise, then silence again. The sound icon always start mutted, after unmutting, I have no sound. STEP 10 I dont have this command in my ubuntu. STEP 11 Tried at STEP 8, no sound. There are no problem with jumpers or hardware, cause I have sound working on windows. STEP 12 No way to open my alienware and loss the warranty x.X" STEP 13 I think it's loaded, judging my the logs STEP 14 Alienware M17xR4, the hardware is listed in the logs above, at STEP 4. There are two headphone hacks, one with just an headphone printed above, and the other with an headset (with mic) printed, there is a mic jack too, and a spdif (optical) too. STEP 15 I dont want to enable S/PDIF STEP 16 I never used the HDMI output, yet... Thanks in advance. I hope I listed all the information you need.

    Read the article

  • Joy! | Important Information About Your iPad 3G

    - by Jeff Julian
    Looks like I was one of the lucky 114,000 who AT&T lost their email to “hackers”.  Why is “hackers” in “double quotes”.  I can just imagine some executive at AT&T in their “Oh No, We Messed Up Meeting” saying, what happened?  Then someone replied, well we have had a breach and “hackers” broke in (using the quote in the air gesture) and stole our iPad 3G customers emails. Oh well, I am sure my email has been sold and sold again by many different vendors, why not AT&T now.  At least Dorothy Attwood could have gave us her email to give to someone else instead of blinking it through a newsletter system. June 13, 2010 Dear Valued AT&T Customer, Recently there was an issue that affected some of our customers with AT&T 3G service for iPad resulting in the release of their customer email addresses. I am writing to let you know that no other information was exposed and the matter has been resolved.  We apologize for the incident and any inconvenience it may have caused. Rest assured, you can continue to use your AT&T 3G service on your iPad with confidence. Here’s some additional detail: On June 7 we learned that unauthorized computer “hackers” maliciously exploited a function designed to make your iPad log-in process faster by pre-populating an AT&T authentication page with the email address you used to register your iPad for 3G service.  The self-described hackers wrote software code to randomly generate numbers that mimicked serial numbers of the AT&T SIM card for iPad – called the integrated circuit card identification (ICC-ID) – and repeatedly queried an AT&T web address.   When a number generated by the hackers matched an actual ICC-ID, the authentication page log-in screen was returned to the hackers with the email address associated with the ICC-ID already populated on the log-in screen. The hackers deliberately went to great efforts with a random program to extract possible ICC-IDs and capture customer email addresses.  They then put together a list of these emails and distributed it for their own publicity. As soon as we became aware of this situation, we took swift action to prevent any further unauthorized exposure of customer email addresses.  Within hours, AT&T disabled the mechanism that automatically populated the email address. Now, the authentication page log-in screen requires the user to enter both their email address and their password. I want to assure you that the email address and ICC-ID were the only information that was accessible. Your password, account information, the contents of your email, and any other personal information were never at risk.  The hackers never had access to AT&T communications or data networks, or your iPad.  AT&T 3G service for other mobile devices was not affected. While the attack was limited to email address and ICC-ID data, we encourage you to be alert to scams that could attempt to use this information to obtain other data or send you unwanted email. You can learn more about phishing by visiting the AT&T website. AT&T takes your privacy seriously and does not tolerate unauthorized access to its customers’ information or company websites.   We will cooperate with law enforcement in any investigation of unauthorized system access and to prosecute violators to the fullest extent of the law. AT&T acted quickly to protect your information – and we promise to keep working around the clock to keep your information safe.  Thank you very much for your understanding, and for being an AT&T customer. Sincerely, Dorothy Attwood Senior Vice President, Public Policy and Chief Privacy Officer for AT&T Technorati Tags: AT&T,iPad 3G,Email

    Read the article

  • Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Functional/nonfunctional requirements VS design ideas

    - by Nicholas Chow
    Problem domain Functional requirements defines what a system does. Non-Functional requirements defines quality attributes of what the system does as a whole.(performance, security, reliability, volume, useability, etc.) Constraints limits the design space, they restrict designers to certain types of solutions. Solution domain Design ideas , defines how the system does it. For example a stakeholder need might be we want to increase our sales, therefore we must improve the usability of our webshop so more customers will purchase, a requirement can be written for this. (problem domain) Design takes this further into the solution domain by saying "therefore we want to offer credit card payments in addition to the current prepayment option". My problem is that the transition phase from requirement to design seems really vague, therefore when writing requirements I am often confused whether or not I incorporated design ideas in my requirements, that would make my requirement wrong. Another problem is that I often write functional requirements as what a system does, and then I also specify in what timeframe it must be done. But is this correct? Is it then a still a functional requirement or a non functional one? Is it better to seperate it into two distinct requirements? Here are a few requirements I wrote: FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. FR2 Organizer submits a Project FR2 describes the submission of a Project by an Organizer on CrowdFundum - FR2 The system shall display a submit Project form to the Organizer accounts on the website.< - FR2.3 The system shall check for completeness the Name of the Project, 1-3 Photo’s, Keywords of the Project, Punch line, Minimum and maximum amount of people, Funding threshold, One or more reward tiers, Schedule of when what will be organized, Budget plan, 300-800 Words of additional information about the Project, Contact details within 1 secondin after an Organizer submits the submit Project form. - FR2.8 The system shall add to the homepage in the new Projects category the Project link within 30 seconds after the system made a Project webpage - FR2.9 The system shall include in the Project link for the homepage : Name of the Project, 1 Photo, Punch line within 30 seconds after the system made a Project webpage. Questions: FR 1.1 : Have I incorporated a design idea here, would " the system shall have a registration form" be a better functional requirement? F1.2 ,2.3 : Is this not singular? Would the conditions be better written for each its own separate requirement FR 1.4: Is this a design idea? Is this a correct functional requirement or have I incorporated non functional(performance) in it? Would it be better if I written it like this: FR1 The system shall display an error message when check is unsuccessful. NFR: The system will respond to unsuccesful registration form checks within 1 seconds. Same question with FR 2.8 and 2.9. FR2.3: The system shall check for "completeness", is completeness here used ambigiously? Should I rephrase it? FR1.2: I added that the system shall require a "Captcha code" is this a functional requirement or does it belong to the "security aspect" of a non functional requirement. I am eagerly waiting for your response. Thanks!

    Read the article

  • Radeon Mobility HD 5470 Not Working

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • The Power to Control Power

    - by speakjava
    I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

    Read the article

  • Attending a Career Fair: &ldquo;Don&rsquo;t be shy &ndash; Be prepared&rdquo;

    - by jessica.ebbelaar
    There are a large number of ways to interact with companies nowadays. The career fair is a very effective and personal way to interact with a number of different companies in a very short period of time. Here are some simple tips to help you perform during a career fair. Do research The key to being successful at a career fair is to do research before you go. Make a first selection of the companies you feel could be interesting for you. Include many types of employers. Once you have decided on the list of companies you want to visit, go to their career portal. Inform yourself about what the company does, i.e what roles there are available, how the company culture is described, what impression the testimonials give you. The question that you still have after reviewing this information, are the ones you can discuss with the company on the fair. Sell yourself Visit the companies you have on your top 5 list first, so you will be at your highest energy level to make that first impression. Think in advance about what you are going to tell the recruiter. Prepare a 30-second introduction (including degree, strengths, skills & experience) Be confident when you talk about your experience. Remember to start the conversation with a smile, make good eye contact and give a firm handshake. You could be speaking to your next manager, so be professional! If you already know what jobs you are interested in, relate your skills and experience to the roles that the company has available. If you are not yet sure gather as much information as you can about employment and/or hiring procedures, specific skills necessary for different jobs, training and career paths. Stand out As career fairs are very crowded and the attending companies meet with a lot of potential candidates on one day, you have to make sure you are noticed in a positive way. A good preparation and asking questions that show you have a good understanding of the industry, organization and roles will help you. Be aware of time demands on employers. Do not monopolize an employer's time. Dress appropriately to make a good first impression. Bring your resume Do not forget to bring your resume in print or on a USB-stick to the fair. If you are searching for different types of jobs, bring different versions of your resume. Your resume should be short and professional on white paper that is free of graphics or fancy print styles and containing larger margins for interviewer notes. Follow up After each conversation ask who you can contact for follow-up discussions about the specific roles. Use the back of a business card to record notes that help you remember important details and follow-up instructions. If no card is available, record the contact information and your comments in your notepad or phone. Last but not least, thank everyone you talk to for their time. Follow up as soon as possible with thank you notes that address the companies’ hiring needs, your qualifications, and express your desire for a second interview. What not to do… Do not visit a company with a group of friends. Interact with the companies on your own, to make your own positive impression. Do not walk up to a recruiter and interrupt a current conversation; wait your turn and be polite. What you should absolutely avoid is a grab and run on freebies! Take the time to speak to the company and ask for a freebie at the end of the conversation in case they are not offered to you. Good luck with the preparations for the career fair you will attend. Oracle recruiters look forward to meet you! They will be present on a large number of fairs in the region. For an overview of the fairs go to the Events & Calendar page on http://campus.oracle.com If you have any questions related to this article feel free to contact [email protected].

    Read the article

  • Virtualized data centre&ndash;Part three: Architecture

    - by marc dekeyser
    Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

    Read the article

  • Texture displays on Android emulator but not on device

    - by Rob
    I have written a simple UI which takes an image (256x256) and maps it to a rectangle. This works perfectly on the emulator however on the phone the texture does not show, I see only a white rectangle. This is my code: public void onSurfaceCreated(GL10 gl, EGLConfig config) { byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuffer.asFloatBuffer(); vertexBuffer.put(cardshape); vertexBuffer.position(0); byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); textureBuffer = byteBuffer.asFloatBuffer(); textureBuffer.put(textureshape); textureBuffer.position(0); // Set the background color to black ( rgba ). gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); // Enable Smooth Shading, default not really needed. gl.glShadeModel(GL10.GL_SMOOTH); // Depth buffer setup. gl.glClearDepthf(1.0f); // Enables depth testing. gl.glEnable(GL10.GL_DEPTH_TEST); // The type of depth testing to do. gl.glDepthFunc(GL10.GL_LEQUAL); // Really nice perspective calculations. gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); gl.glEnable(GL10.GL_TEXTURE_2D); loadGLTexture(gl); } public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glDisable(GL10.GL_DEPTH_TEST); gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glLoadIdentity(); gl.glTranslatef(card.x, card.y, 0.0f); gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void onSurfaceChanged(GL10 gl, int width, int height) { // Sets the current view port to the new size. gl.glViewport(0, 0, width, height); // Select the projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); // Reset the projection matrix gl.glLoadIdentity(); // Calculate the aspect ratio of the window GLU.gluPerspective(gl, 45.0f, (float) width / (float) height, 0.1f, 100.0f); // Select the modelview matrix gl.glMatrixMode(GL10.GL_MODELVIEW); // Reset the modelview matrix gl.glLoadIdentity(); } public int[] texture = new int[1]; public void loadGLTexture(GL10 gl) { // loading texture Bitmap bitmap; bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.image); // generate one texture pointer gl.glGenTextures(0, texture, 0); //adds texture id to texture array // ...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now // create nearest filtered texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // Use Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); // Clean up bitmap.recycle(); } As per many other similar issues and resolutions on the web i have tried setting the minsdkversion is 3, loading the bitmap via an input stream bitmap = BitmapFactory.decodeStream(is), setting BitmapFactory.Options.inScaled to false, putting the images in the nodpi folder and putting them in the raw folder.. all of which didn't help. I'm not really sure what else to try..

    Read the article

  • PCI Encryption Key Management

    - by Unicorn Bob
    (Full disclosure: I'm already an active participant here and at StackOverflow, but for reasons that should hopefully be obvious, I'm choosing to ask this particular question anonymously). I currently work for a small software shop that produces software that's sold commercially to manage small- to mid-size business in a couple of fairly specialized industries. Because these industries are customer-facing, a large portion of the software is related to storing and managing customer information. In particular, the storage (and securing) of customer credit card information. With that, of course, comes PCI compliance. To make a long story short, I'm left with a couple of questions about why certain things were done the way they were, and I'm unfortunately without much of a resource at the moment. This is a very small shop (I report directly to the owner, as does the only other full-time employee), and the owner doesn't have an answer to these questions, and the previous developer is...err...unavailable. Issue 1: Periodic Re-encryption As of now, the software prompts the user to do a wholesale re-encryption of all of the sensitive information in the database (basically credit card numbers and user passwords) if either of these conditions is true: There are any NON-encrypted pieces of sensitive information in the database (added through a manual database statement instead of through the business object, for example). This should not happen during the ordinary use of the software. The current key has been in use for more than a particular period of time. I believe it's 12 months, but I'm not certain of that. The point here is that the key "expires". This is my first foray into commercial solution development that deals with PCI, so I am unfortunately uneducated on the practices involved. Is there some aspect of PCI compliance that mandates (or even just strongly recommends) periodic key updating? This isn't a huge issue for me other than I don't currently have a good explanation to give to end users if they ask why they are being prompted to run it. Question 1: Is the concept of key expiration standard, and, if so, is that simply industry-standard or an element of PCI? Issue 2: Key Storage Here's my real issue...the encryption key is stored in the database, just obfuscated. The key is padded on the left and right with a few garbage bytes and some bits are twiddled, but fundamentally there's nothing stopping an enterprising person from examining our (dotfuscated) code, determining the pattern used to turn the stored key into the real key, then using that key to run amok. This seems like a horrible practice to me, but I want to make sure that this isn't just one of those "grin and bear it" practices that people in this industry have taken to. I have developed an alternative approach that would prevent such an attack, but I'm just looking for a sanity check here. Question 2: Is this method of key storage--namely storing the key in the database using an obfuscation method that exists in client code--normal or crazy? Believe me, I know that free advice is worth every penny that I've paid for it, nobody here is an attorney (or at least isn't offering legal advice), caveat emptor, etc. etc., but I'm looking for any input that you all can provide. Thank you in advance!

    Read the article

  • Android -- Can't play any videos (mp4/mov/3gp/etc.)?

    - by borg17of20
    Hello all, I'm having great difficulty getting my Android application to play videos from the SD card. It doesn't matter what size, bitrate, video format, or any other setting I can think of, neither the emulator nor my G1 will play anything I try to encode. I've also tried a number of videos from the web (various video formats, bitrates, with and without audio tracks, etc.), and none of those work either. All I keep getting is a dialog box that says: "Cannot play video" "Sorry, this video cannot be played." There are errors reported in LogCat, but I don't understand them and I've tried searching the Internet for further explanations without any luck. See below: 03-30 05:34:26.807: ERROR/QCOmxcore(51): OMXCORE API : Free Handle 390d4 03-30 05:34:26.817: ERROR/QCOmxcore(51): Unloading the dynamic library for OMX.qcom.video.decoder.avc 03-30 05:34:26.817: ERROR/PlayerDriver(51): Command PLAYER_PREPARE completed with an error or info PVMFErrNoResources 03-30 05:34:26.857: ERROR/MediaPlayer(14744): error (1, -15)03-30 05:34:26.867: ERROR/MediaPlayer(14744): Error (1,-15) Sometimes I also get this: 03-30 05:49:49.267: ERROR/PlayerDriver(51): Command PLAYER_INIT completed with an error or info PVMFErrResource 03-30 05:49:49.267: ERROR/MediaPlayer(19049): error (1, -17) 03-30 05:49:49.347: ERROR/MediaPlayer(19049): Error (1,-17) Here is the code I'm using (in my onCreate() method): this.setContentView(R.layout.main); //just a simple VideoView loading files from the SD card VideoView myIntroView = (VideoView) this.findViewById(R.id.VideoView01); MediaController mc = new MediaController(this); myIntroView.setMediaController(mc); myIntroView.setVideoPath("/sdcard/test.mp4"); myIntroView.requestFocus(); myIntroView.start(); Please help!

    Read the article

  • X509 Certificates, DigitalSignature vs NonRepudiation (C#)

    - by Eyvind
    We have been handed a set of test sertificates on smart cards for developing a solution that requires XML messages to be signed using PKI. Each (physical) smart card seems to have two certificates stored on it. I import them into the Windows certificate store using software supplied by the smart card provider, and then use code resembling the following to iterate over the installed certificates: foreach (X509Certificate2 x509 in CertStore.Certificates) { foreach (X509Extension extension in x509.Extensions) { if (extension.Oid.Value == "one we are interested in") { X509KeyUsageExtension ext = (X509KeyUsageExtension)extension; if ((ext.KeyUsages & X509KeyUsageFlags.DigitalSignature) != X509KeyUsageFlags.None) { // process certs here We have been told to use the certificates that have the NonRepudiation key usage flag set to sign the XMLs. However, the certificate that has the NonRepudiation flag has this flag only, and not for instance the DigitalSignature flag which I check for above. Does this strike anyone but me as slightly odd? I am in other words told to sign with a certificate that does not (appear to) have the DigitalSignature usage flag set. Is this normal procedure? Any comments? Thanks.

    Read the article

  • Entlib validation to syntax to accept only numeric month numbers?

    - by ElHaix
    I've got an enum defined as such: Private Enum AllowedMonthNumbers _1 _2 _3 _4 _5 _6 _7 _8 _9 _10 _11 _12 End Enum Then a property validator defined as: <TypeConversionValidator(GetType(Int32), MessageTemplate:="Card expiry month must be numeric.", Ruleset:="CreditCard")> _ <EnumConversionValidator(GetType(AllowedMonthNumbers), MessageTemplate:="Card expiry month must be between 1 and 12.", Ruleset:="CreditCard")> _ The validation expects "_#", as when I remove the TypeConversionValidator, it passes with setting the value to "_3" or any other number in the enum. What I need is for this to only accept b/t 1-12, and simply having numeric values in the enum won't work. Any tips? Thanks. UPDATE I replaced the EnumConversionValidator with a RangeValidator, and attempting to set the parameter to "1", but received the following error: <RangeValidator(1, RangeBoundaryType.Inclusive, 12, RangeBoundaryType.Inclusive, MessageTemplate:="..."> However that's now giving me the following error: System.Web.Services.Protocols.SoapException : System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.ArgumentException: Object must be of type Int32. at System.Int32.CompareTo(Object value) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.RangeChecker`1.IsInRange(T target) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.RangeValidator`1.DoValidate(T objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validator`1.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.AndCompositeValidator.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.ValueAccessValidator.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.AndCompositeValidator.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.GenericValidatorWrapper`1.DoValidate(T objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validator`1.Validate(T target, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validation.Validate[T](T target, String[] rulesets) at ....

    Read the article

  • weird swing heavyweight object lightweight objects problem

    - by Yoav Schwartz
    Hello, We have a problem in our swing based application since we've upgraded our java version from 6u5 to 6u18 (The application runs over WinXP). Our application contains a Canvas object which resides in a JFrame. The application draws things on the canvas. Every time we drag a lightweight swing object (popup or another frame) over the canvas, it has a refresh problem. It blinks - becomes black. The problem only resolves after we move the swing component away from the canvas and click on it again. We think this problem is related to the fact the the canvas is a heavyweight object. And we know there were changes done in the new versions of java on the mixing of heavyweight and lightweight objects issue. Some more details: 1) Our problem reproduces in java 6u14 and 6u16. 2) Everything works fine in java 6u5. Another strange thing: We have 2 types of stations running our application. The first type has a ATI FireGL7100 PCI-E graphics card. The second type has a Matrox G450 PCI graphic card. The problem does not reproduce on the Matrox based station in any java version. One more thing: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6829858 - looks similar to our problem. Is our problem familiar? Do you have any suggestions (workarounds, ideas how the difference in graphics cards is connected to this problem) Hope I was clear enough, Yoav

    Read the article

  • Java Playing Cards Game Framework

    - by isme
    My friends and I at uni love playing Shithead into the wee hours. But soon we graduate and will leave town, so probably won't get together for a game for a while. I want to develop a Java app we can use to play Shithead and our other favorites over a network. An app like this already exists, but is ugly, buggy and does not support our house rules. The source is available, but is such a mess that I would really rather start from scratch than try to refactor it! Building my game using some standard playing card api or framework, if such a thing exists, would be better than starting from scratch. The answer to a similar SO question was to use the JPC-API, which allegedly provides basic playing card services and rendering. But this Sourceforge project currently makes available no files or source code! Is there an alternative, or somewhere else to find this framework? Soon I will need help with the following as well: Lobby services (finding other players) Gaming network protocol (to communicate moves between players) Gaming theory (to write the computer opponent) Winning condition detection Game UI development

    Read the article

  • USE case to Class Diagram - How do I?

    - by 01010011
    Hi, I would like your guidance on how to create classes and their relationships (generalization, association, aggregation and composition) accurately from my USE case diagram (please see below). I am trying to create this class diagram so I can use it to create a simple online PHP application that allows the user to register an account, login and logout, and store, search and retrieve data from a MySQL database. Are my classes correct? Or should I create more classes? And if so, what classes are missing? What relationships should I use when connecting the register, login, logout, search_database and add_to_database to the users? I'm new to design patterns and UML class diagrams but from my understanding, the association relationship relates one object with another object; the aggregation relationship is a special kind of association that allows "a part" to belong to more than one "whole" (e.g. a credit card and its PIN - the PIN class can also be used in a debit card class); and a composition relationship is a special form of aggregation that allows each part to belong to only one whole at a time. I feel like I have left out some classes or something because I just can't seem to find the relationships from my understanding of relationships. Any assistance will be really appreciated. Thanks in advance. USE CASE DIAGRAM CLASS DIAGRAM

    Read the article

  • My OpenCL kernel is slower on faster hardware.. But why?

    - by matdumsa
    Hi folks, As I was finishing coding my project for a multicore programming class I came up upon something really weird I wanted to discuss with you. We were asked to create any program that would show significant improvement in being programmed for a multi-core platform. I’ve decided to try and code something on the GPU to try out OpenCL. I’ve chosen the matrix convolution problem since I’m quite familiar with it (I’ve parallelized it before with open_mpi with great speedup for large images). So here it is, I select a large GIF file (2.5 MB) [2816X2112] and I run the sequential version (original code) and I get an average of 15.3 seconds. I then run the new OpenCL version I just wrote on my MBP integrated GeForce 9400M and I get timings of 1.26s in average.. So far so good, it’s a speedup of 12X!! But now I go in my energy saver panel to turn on the “Graphic Performance Mode” That mode turns off the GeForce 9400M and turns on the Geforce 9600M GT my system has. Apple says this card is twice as fast as the integrated one. Guess what, my timing using the kick-ass graphic card are 3.2 seconds in average… My 9600M GT seems to be more than two times slower than the 9400M.. For those of you that are OpenCL inclined, I copy all data to remote buffers before starting, so the actual computation doesn’t require roundtrip to main ram. Also, I let OpenCL determine the optimal local-worksize as I’ve read they’ve done a pretty good implementation at figuring that parameter out.. Anyone has a clue? edit: full source code with makefiles here http://www.mathieusavard.info/convolution.zip cd gimage make cd ../clconvolute make put a large input.gif in clconvolute and run it to see results

    Read the article

  • Application passwords and SQLite security

    - by Bryan
    I have been searching on google for information regarding application passwords and SQLite security for some time, and nothing that I have found has really answered my questions. Here is what I am trying to figure out: 1) My application is going to have an optional password activity that will be called when the application is first opened. My questions for this are a) If I store the password via android preference or SQLite database, how can I ensure security and privacy for the password, and b) how should password recovery be handled? Regarding b) from above, I have thought about requiring an email address when the password feature is enabled, and also a password hint question for use when requesting password recovery. Upon successfully answering the hint question, the password is then emailed to the email address that was submitted. I am not completely confident in the security and privacy of the email method, especially if the email is sent when the user is connected to an open, public wireless network. 2) My application will be using an SQLite database, which will be stored on the SD card if the user has one. Regardless of whether it is stored on the phone or the SD card, what options do I have for data encryption, and how does that affect the application performance? Thanks in advance for time taken to answer these questions. I think that there may be other developers struggling with the same concerns.

    Read the article

  • Parsing a blackberry .ipd file

    - by galaxywatcher
    I recently lost my Blackberry. When I discovered it was gone very shortly afterwards and called it, the sim card had already been removed. I ain't seeing that Blackberry again. Ok. I am out $300, but at least my data is backed up. I had an older working Blackberry fortunately and I got a new sim card and proceeded to restore my data using Blackberry Desktop Manager. 7000+ emails, hundreds of autotext entries, sms messages, calendar events, all backing up. Looking good. Lo and behold! My Address Book contacts refuse to back up? I try advanced, and it is greyed out as an option to restore. Far more frustrating than losing my bberry in the first place is wrangling with software that defies human logic. Ok, now I guess I will have to enter all 327 names by hand. That is, if I can read the .ipd file. I have tried the free version of ABC Amber Blackberry editor, but when I open the .ipd file, the contacts just do not show up. I am beginning to feel like the gods are conspiring against me. Then I found this: http://jabide.com/2009/03/parse-blackberry-ipd-files/ He posted a perl script that claims to extract the files. I copied and pasted the code and it did list all the different databases in my .ipd file, I was elated that a cool solution like this was published. I followed the instructions and garbled data with some discernible ascii was sent to standard output unlike a .csv file like he said it would. This is enough to make a grown man cry. Does anyone out there have a solution to extract my address book contacts from an .ipd file?

    Read the article

  • Is it possible to run my Windows Form application in Windows CE platform?

    - by Fakhrul
    I am new in Windows CE development and never done it yet. Need some advise from the expert in here. In our current project, we are developing a client-server application. The client side is using a windows form application that are base on Windows XP OS while the server is a web base application. This question are related to the client application (Windows Form). This application are using Sql Server Express Edition for data storage. The data is stored in XML object format. It also can transfer a data from client to server via web service. It also interact with hardware such as Magnetic Stripe Reader, Contactless Smart Card Reader, and a thermal printer. Most of the communication between hardware device and systems are base on Serial Port. It is use standard app.config for the configuration and is a multi threaded application. There is a new requirement to use a Handheld device which is use a Windows CE platform. This handheld included the required equipment such as Contactless Smart Card Reader, Printer and Magnetic Stripe Reader. Instead of developing a new client application, is it possible to me to convert my current application that are base on Windows XP to Windows CE? If yes, how can I do that? If no, is it any other brilliant suggestion to do this? Thanks in advance. Software Engineer

    Read the article

  • asp.net mvc - reusing pages/controllers in workflow

    - by fregas
    I have 2 workflows: 1) the user signs up for the first time. They see 3 different screens, their basic user information, their credit card, and some additional profile information. They complete these 3 steps in a wizard like fashion, where each time they hit "submit" they leave the current screen and move on to the next. 2) the user already is signed up. He has links in the navigation to these 3 seperate pages. He can update them in any order. When he hits save, he doesn't leave the page he's on, it just shows something at the top that says "Credit Card Info saved..." or whatever. Possibly using ajax or maybe a full page refresh. I would like to reuse the code not only the view but also in the controller for these 3 screens between the two workflows, but without a ton of if...then logic to determine where to go next depending on whether its a first signup in the wizard or updating individual parts of a profile. Any ideas?

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >