Search Results

Search found 21926 results on 878 pages for 'drop down'.

Page 109/878 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • Oracle Internet Directory - Required Schemas already loaded

    - by Brandon Kreisel
    After a successful installation of Oracle Internet Directories (OID) I attemped to remove and re-install it with a different configuration. First I ran ./runInstaller.sh -deinstall from the OID middleware directory to uninstall. Then i ran the installer again but it complained on the Specify Schema Database step. Upon connecting to the database, the installer threw: INST-5174: Required schemas are already loaded in the specified database. I connected to the target database and removed the OID schemas I knew of SQL> drop user ODS cascade; SQL> drop user ODSSM cascade; That didn't not work and the error still appears. What steps am I missing? Note: The Database is 11g and it was brand new before installing OID so there is no other data select * from all_users doesn't show any other schemas related to OID from what I can tell, the latest user creation date is OCT 2010

    Read the article

  • Can't connect to website after altering IPTables

    - by user2833135
    I attempted to open up a port on my VPS, but I can't connect to my website after opening up that port. Below are the commands I issued to open the port. I didn't get an error or anything after setting this up. I just can't connect to my website after doing this. [root@vps ~]# iptables -F [root@vps ~]# iptables -A INPUT -i lo -j ACCEPT [root@vps ~]# iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT [root@vps ~]# iptables -A INPUT -p tcp --dport 25765 -j ACCEPT [root@vps ~]# iptables -P INPUT DROP [root@vps ~]# iptables -P FORWARD DROP [root@vps ~]# iptables -P OUTPUT ACCEPT [root@vps ~]# iptables -L -v Just a side note, but I am running CentOS 6 (64 bit) Thank you in advance.

    Read the article

  • Windows 7 and wallpaper folders

    - by Andi
    I try to change my desktop wallpaper and I cannot choose a different folder from the one I chose at first... When I first installed W7 I changed the wallpaper by right-clicking in the desktop and choosing Customize (maybe it's not correct because I use the italian version) and then Change Wallpaper in the bottom and finally I browsed for a folder with some images in and chose the wallpaper. When I do the same exact things now, the folder I select in the final pass is not selected: I mean its pictures are not shown and it doesn't appear in the drop-down list. I can put a specific picture as a wallpaper by selecting it through Explorer, and some times (not always) the folder shows in the drop-down list. Is there any possible solution to this?

    Read the article

  • IPSec VPN's being dropped by router and will not re-establish

    - by David Gard
    We have 3 sites, with our two remote sites connection to head office via LAN-to-LAN VPN's. All 3 sites use DrayTek 2900's with firware version v3.3.1.1_RC2 (this is a release candidate that DrayTek suggested I try, but sadly it made no difference). The only way to re-establish the VPN's once they have been dropped is to restart the router. Head office is set to dial out to both sites, with both the 'Always on' and 'Enable PING to keep alive' (pinging a server in the remote offices) options ticked. However, at random intervals the VPN's drop, logging IKE_RELEASE VPN : Dial-out Profile Index = 7, Name = Shepton (for one connection, and '6' & 'Wincanton' for the other connection). I first tried swapping the router with one at another site, and then had all three replaced, but that failed to solve the problem. Is anyone aware of anything that could cause the VPN's to drop randomly like this? Thanks.

    Read the article

  • Do all Mac OS X applications require Admin permissions to 'install'?

    - by Andy
    I'm new to the whole Mac OS X operating system. I'm trying to learn and I've got myself a MacBook running Mac OS X 10.7.3. I've created a test user that can not administrate so that I can test out permissions and I've found that I can not do anything in the Applications folder, which includes 'installing' applications (even those drag 'n' drop ones) and creating folders, without entering an Admin name and password. However, I was under the impression that this wasn't the case and you only needed Admin permissions to write to somewhere like Preferences, so can somebody please clarify why it is asking for Admin when I try to drag 'n' drop applications into the Applications folder.

    Read the article

  • Iptables config breaks Java + Elastic Search communication

    - by Agustin Lopez
    I am trying to set up a firewall for a server hosting a java app and ES. Both are on the same server and communicate to each other. The problem I am having is that my firewall configuration prevents java from connecting to ES. Not sure why really.... I have tried lot of stuff like opening the port range 9200:9400 to the server ip without any luck but from what I know all communication inside the server should be allowed with this configuration. The idea is that ES should not be accessible from outside but it should be accessible from this java app and ES uses the port range 9200:9400. This is my iptables script: echo -e Deleting rules for INPUT chain iptables -F INPUT echo -e Deleting rules for OUTPUT chain iptables -F OUTPUT echo -e Deleting rules for FORWARD chain iptables -F FORWARD echo -e Setting by default the drop policy on each chain iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -P FORWARD DROP echo -e Open all ports from/to localhost iptables -A INPUT -i lo -j ACCEPT echo -e Open SSH port 22 with brute force security iptables -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --set --name SSH --rsource iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 4 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j LOG --log-prefix "SSH brute force " iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --update --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT echo -e Open NGINX port 80 iptables -A INPUT -p tcp --dport 80 -j ACCEPT echo -e Open NGINX SSL port 443 iptables -A INPUT -p tcp --dport 443 -j ACCEPT echo -e Enable DNS iptables -A INPUT -p tcp -m tcp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -p udp -m udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT And I get this in the java app when this config is in place: org.elasticsearch.cluster.block.ClusterBlockException: blocked by: [SERVICE_UNAVAILABLE/1/state not recovered / initialized];[SERVICE_UNAVAILABLE/2/no master]; at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:292) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1185) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:537) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:475) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:304) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:228) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:300) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:195) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:700) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:760) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:482) at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:403) Do any of you see any problem with this configuration and ES? Thanks in advance

    Read the article

  • Postgres 9.0 locking up, 100% CPU

    - by Jake
    We are having a problem where our Postgres 9.0 server occasionally locks up and kills our webapp. Restarting Postgres fixes the problem. Here's what I've been able to observe: First, usage of one CPU jumps to 100% for a few minutes Disk operations drop to ~0 during this time Database operations drop to 0 (blocks and tuples per sec) Logs show during this time: WARNING: worker took too long to start; cancelled WARNING: worker took too long to start; cancelled No Queries in logs (only those over 200ms are logged) No unusually long-running queries logged before or during Then the second CPU jumps to 100% The number of postgres processes jumps from the usual 8-10 to ~20 Matched by a spike in Postgres Blocks per second (about twice normal) Logs show LOG: could not accept SSL connection: EOF detected Queries are running but slow Restarting postgres returns everything to normal Setup: Server: Amazon EC2 Large Ubuntu 10.04.2 LTS Postgres 9.0.3 Dedicated DB server Does anyone have any idea what's causing this? Or any suggestions about what else I should be checking out?

    Read the article

  • Windows 7 does not recognise second display output

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • Security log overflowing with filtering blocks

    - by Jacob
    I have a Windows 7 workstation whose security log is overflowing with the following errors: Audit Failure 3/31/2010 2:00:50 PM Microsoft-Windows-Security-Auditing 5157 Filtering Platform Connection "The Windows Filtering Platform has blocked a connection." Audit Failure 3/31/2010 2:00:50 PM Microsoft-Windows-Security-Auditing 5152 Filtering Platform Packet Drop "The Windows Filtering Platform has blocked a packet." These are not unexpected events; the firewall is expected to drop unsolicited traffic. However, I can't figure out how to tell Windows to stop writing these events to the security log. I've seen this problem before and have been able to find an answer with the use of Google, but I wasn't able to locate on this this time. Thanks!

    Read the article

  • Linux Transparent Bridge for Network

    - by Blackninja543
    I am attempting to set up a semi-transparent bridge. I say semi because I want it to act as a transparent tap for all traffic moving through both sides of the bridge. What I also want is to have the "green zone" accessible to a web interface for the bridge that will display all results of the IDS and other network monitoring tools. My example would be as such: eth0 <--> bridge(br0) <--> eth1 The entire network would be on the same subset however anything coming from eth0 to eth1 would be accepted. The only time anything would be drop is if the eth0 attempted to access br0. If someone attempts to access the web interface on br0 through eth1 it will succeed. My biggest problem I feel is if I attempt to block anything from eth0 to br0 this will drop the bridge all together.

    Read the article

  • Looking for ideas how to refactor my (complex) algorithm

    - by _simon_
    I am trying to write my own Game of Life, with my own set of rules. First 'concept', which I would like to apply, is socialization (which basicaly means if the cell wants to be alone or in a group with other cells). Data structure is 2-dimensional array (for now). In order to be able to move a cell to/away from a group of another cells, I need to determine where to move it. The idea is, that I evaluate all the cells in the area (neighbours) and get a vector, which tells me where to move the cell. Size of the vector is 0 or 1 (don't move or move) and the angle is array of directions (up, down, right, left). This is a image with representation of forces to a cell, like I imagined it (but reach could be more than 5): Let's for example take this picture: Forces from lower left neighbour: down (0), up (2), right (2), left (0) Forces from right neighbour : down (0), up (0), right (0), left (2) sum : down (0), up (2), right (0), left (0) So the cell should go up. I could write an algorithm with a lot of if statements and check all cells in the neighbourhood. Of course this algorithm would be easiest if the 'reach' parameter is set to 1 (first column on picture 1). But what if I change reach parameter to 10 for example? I would need to write an algorithm for each 'reach' parameter in advance... How can I avoid this (notice, that the force is growing potentialy (1, 2, 4, 8, 16, 32,...))? Can I use specific design pattern for this problem? Also: the most important thing is not speed, but to be able to extend initial logic. Things to take into consideration: reach should be passed as a parameter i would like to change function, which calculates force (potential, fibonacci) a cell can go to a new place only if this new place is not populated watch for corners (you can't evaluate right and top neighbours in top-right corner for example)

    Read the article

  • Blackberry: How to properly handle focus traversal in custom field?

    - by DaveJohnston
    I am writing an app for Blackberry and I have the following problem: I have implemented a custom field by extending the Manager class. The field is quite simple, it consists of a label and two check boxes, yes and no. The fields are laid out so that the label is on the left and uses as much space as it can while still allowing room for the check boxes which are positioned next to each other at the right and vertically centred compared to the label (if it spans more than one line). So it looks like this: This is a question? O Yes O No Everything is fine so far in terms of laying out the fields. But now I am trying to handle focus traversal. First of all the default behaviour when the user scrolls up or down is to move between the yes and no options. I want to move to the next field above or below when up or down is pressed, so I did this: protected int moveFocus(int amount, int status, int time) { if (status == 537001984 || status == -1610481664) { // Up or down was pressed // Don't move focus between yes and no when up or down is pressed. return amount; } return super.moveFocus(amount, status, time); } And that seems to work. The next thing I would like to do is to remember which option last had the focus when the field loses focus, then on gaining focus again (regardless of which direction the focus comes from) set this field to have the focus. I tried overriding onUnfocus and onFocus so that onUnfocus I note which field was focussed then onFocus setFocus to that field. But I get a StackOverflowError, I guess because the call to setFocus on a field within the manager actually calls onFocus for the manager itself again?? So does anyone know how I should be doing this? I checked the DateField and it has the exact behaviour I am looking for, i.e. it remembers if you were last on the day, month or year field and sets this field to focus when the field itself gets the focus.

    Read the article

  • Windows 7 does not recognise second display output [closed]

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • Block IP Address including ICMP using UFW

    - by dr jimbob
    I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

    Read the article

  • MikroTik ipv6 Tunnel

    - by MikeSmitty
    I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that I can ping any ipv6 address fine, but give it a little time (say, maybe 30 sec) and I can't ping any ipv6 addresses again. Whenever it stops allowing ping to go through I notice the counter on my firewall rule that drops invalid connections goes up. this is my ipv6 firewall config: add action=accept chain=input comment="" connection-state=established \ disabled=no in-interface=sit1 add action=accept chain=input comment="" connection-state=related disabled=no \ in-interface=sit1 add action=accept chain=input comment="" disabled=no in-interface=bridge \ src-address=ipv6_address_here/64 add action=drop chain=input comment="" connection-state=invalid disabled=no \ in-interface=sit1 add action=drop chain=input comment="" disabled=no in-interface=sit1 Any ideas on what it could be?

    Read the article

  • Access 2007 VBA & SQL - Update a Subform pointed at a dynamically created query

    - by Lucretius
    Abstract: I'm using VB to recreate a query each time a user selects one of 3 options from a drop down menu, which appends the WHERE clause If they've selected anything from the combo boxes. I then am attempting to get the information displayed on the form to refresh thereby filtering what is displayed in the table based on user input. 1) Dynamically created query using VB. Private Sub BuildQuery() ' This sub routine will redefine the subQryAllJobsQuery based on input from ' the user on the Management tab. Dim strQryName As String Dim strSql As String ' Main SQL SELECT statement Dim strWhere As String ' Optional WHERE clause Dim qryDef As DAO.QueryDef Dim dbs As DAO.Database strQryName = "qryAllOpenJobs" strSql = "SELECT * FROM tblOpenJobs" Set dbs = CurrentDb ' In case the query already exists we should deleted it ' so that we can rebuild it. The ObjectExists() function ' calls a public function in GlobalVariables module. If ObjectExists("Query", strQryName) Then DoCmd.DeleteObject acQuery, strQryName End If ' Check to see if anything was selected from the Shift ' Drop down menu. If so, begin the where clause. If Not IsNull(Me.cboShift.Value) Then strWhere = "WHERE tblOpenJobs.[Shift] = '" & Me.cboShift.Value & "'" End If ' Check to see if anything was selected from the Department ' drop down menu. If so, append or begin the where clause. If Not IsNull(Me.cboDepartment.Value) Then If IsNull(strWhere) Then strWhere = strWhere & " AND tblOpenJobs.[Department] = '" & Me.cboDepartment.Value & "'" Else strWhere = "WHERE tblOpenJobs.[Department] = '" & Me.cboDepartment.Value & "'" End If End If ' Check to see if anything was selected from the Date ' field. If so, append or begin the Where clause. If Not IsNull(Me.txtDate.Value) Then If Not IsNull(strWhere) Then strWhere = strWhere & " AND tblOpenJobs.[Date] = '" & Me.txtDate.Value & "'" Else strWhere = "WHERE tblOpenJobs.[Date] = '" & Me.txtDate.Value & "'" End If End If ' Concatenate the Select and the Where clause together ' unless all three parameters are null, in which case return ' just the plain select statement. If IsNull(Me.cboShift.Value) And IsNull(Me.cboDepartment.Value) And IsNull(Me.txtDate.Value) Then Set qryDef = dbs.CreateQueryDef(strQryName, strSql) Else strSql = strSql & " " & strWhere Set qryDef = dbs.CreateQueryDef(strQryName, strSql) End If End Sub 2) Main Form where the user selects items from combo boxes. picture of the main form and sub form http://i48.tinypic.com/25pjw2a.png 3) Subform pointed at the query created in step 1. Chain of events: 1) User selects item from drop down list on the main form. 2) Old query is deleted, new query is generated (same name). 3) Subform pointed at query does not update, but if you open the query by itself the correct results are displayed. Name of the Query: qryAllOpenJobs name of the subform: subQryAllOpenJobs Also, the Row Source of subQryAllOpenJobs = qryAllOpenJobs Name of the main form: frmManagement

    Read the article

  • Intermittent connection issues with atheros ar9285

    - by MrStatic
    I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

    Read the article

  • Check if the internet cannot be accessed in Python

    - by Sridhar Ratnakumar
    I have an app that makes a HTTP GET request to a particular URL on the internet. But when the network is down (say, no public wifi - or my ISP is down, or some such thing), I get the following traceback at urllib.urlopen: 70, in get u = urllib2.urlopen(req) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.py", line 126, in urlopen return _opener.open(url, data, timeout) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.py", line 391, in open response = self._open(req, data) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.py", line 409, in _open '_open', req) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.py", line 1161, in http_open return self.do_open(httplib.HTTPConnection, req) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.py", line 1136, in do_open raise URLError(err) URLError: <urlopen error [Errno 8] nodename nor servname provided, or not known> I want to print a friendly error to the user telling him that his network maybe down instead of this unfriendly "nodename nor servname provided" error message. Sure I can catch URLError, but that would catch every url error, not just the one related to network downtime. I am not a purist, so even an error message like "The server example.com cannot be reached; either the server is indeed having problems or your network connection is down" would be nice. How do I go about selectively catching such errors? (For a start, if DNS resolution fails at urllib.urlopen, that can be reasonably assumed as network inaccessibility? If so, how do I "catch" it in the except block?)

    Read the article

  • PHP - Database schema: version control, branching, migrations.

    - by Billiam
    I'm trying to come up with (or find) a reusable system for database schema versioning in php projects. There are a number of Rails-style migration projects available for php. http://code.google.com/p/mysql-php-migrations/ is a good example. It uses timestamps for migration files, which helps with conflicts between branches. General problem with this kind of system: When development branch A is checked out, and you want to check out branch B instead, B may have new migration files. This is fine, migrating to newer content is straight forward. If branch A has newer migration files, you would need to migrate downwards to the nearest shared patch. If branch A and B have significantly different code bases, you may have to migrate down even further. This may mean: Check out B, determine shared patch number, check out A, migrate downwards to this patch. This must be done from A since the actual applied patches are not available in B. Then, checkout branch B, and migrate to newest B patch. Reverse process again when going from B to A. Proposed system: When migrating upwards, instead of just storing the patch version, serialize the whole patch in database for later use, though I'd probably only need the down() method. When changing branches, compare patches that have been run to patches that are available in the destination branch. Determine nearest shared patch (or oldest difference, maybe) between db table of run patches and patches in destination branch by ID or hash. Could also look for new or missing patches that are buried under a number of shared patches between the two branches. Automatically merge down to the nearest shared patch, using the db table stored down() methods, and then merge up to the branche's latest patch. My question is: Is this system too crazy and/or fraught with consequences to bother developing? My experience with database schema versioning is limited to PHP autopatch, which is an up()-only system requiring filenames with sequential IDs.

    Read the article

  • iptables blocking ssh communication

    - by Michal Sapsa
    I'm using this script for iptables: #!/bin/sh echo "1" > /proc/sys/net/ipv4/ip_forward iptables -F iptables -X iptables -F -t nat iptables -X -t nat iptables -F -t filter iptables -X -t filter iptables -t filter -P FORWARD DROP iptables -t filter -A FORWARD -s 192.168.0.0/255.255.0.0 -d 0/0 -j ACCEPT iptables -t filter -A FORWARD -s 0/0 -d 192.168.0.0/255.255.0.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.8.0.1/255.255.255.0 -j MASQUERADE iptables -A FORWARD -s 10.8.0.1/255.255.255.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu iptables -t nat -A PREROUTING -i eth1 -p udp --dport 16161 -j DNAT --to 192.168.0.251:16161 iptables -t nat -A PREROUTING -i eth1 -p udp --sport 16161 -j DNAT --to 192.168.0.251:16161 #openvpn iptables -I INPUT -p tcp --dport 1194 -j ACCEPT iptables -I INPUT -p udp --dport 1194 -j ACCEPT I end up with some iptables rules that should work but don't work - probably because of me. # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *raw :PREROUTING ACCEPT [1657523:1357257330] :OUTPUT ACCEPT [36804:34834370] -A PREROUTING -p icmp -j TRACE -A PREROUTING -p tcp -j TRACE -A OUTPUT -p icmp -j TRACE -A OUTPUT -p tcp -j TRACE COMMIT # Completed on Mon May 26 13:15:43 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *nat :PREROUTING ACCEPT [5033:345623] :INPUT ACCEPT [154:34662] :OUTPUT ACCEPT [6:1968] :POSTROUTING ACCEPT [2:120] -A PREROUTING -i eth0 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A PREROUTING -i eth1 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE COMMIT # Completed on Mon May 26 13:15:44 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:44 2014 *filter :INPUT ACCEPT [548:69692] :FORWARD DROP [8:384] :OUTPUT ACCEPT [2120:1097479] -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1194 -j ACCEPT -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu -A FORWARD -s 192.168.0.0/16 -j ACCEPT -A FORWARD -d 192.168.0.0/16 -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -i eth0 -o eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 22 -j ACCEPT COMMIT TRACE at PREROUTEING AND OUTPUT are only for debuging this thing. When I ssh at public ip with port 16161 I don't get any message, only TimeOut so it looks like I don't get communication back to remote server. ETH0 is the world, ETH1 is LAN Any IPTABLES Masters willing to give a hand ? iptables -vL Chain INPUT (policy ACCEPT 20548 packets, 3198K bytes) pkts bytes target prot opt in out source destination 38822 7014K ACCEPT udp -- any any anywhere anywhere udp dpt:openvpn 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:openvpn Chain FORWARD (policy DROP 1129 packets, 64390 bytes) pkts bytes target prot opt in out source destination 214K 11M TCPMSS tcp -- any any anywhere anywhere tcpflags: SYN,RST/SYN TCPMSS clamp to PMTU 4565K 1090M ACCEPT all -- any any 192.168.0.0/16 anywhere 5916K 7315M ACCEPT all -- any any anywhere 192.168.0.0/16 0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere 0 0 ACCEPT tcp -- any any anywhere 192.168.0.251 tcp dpt:16161 Chain OUTPUT (policy ACCEPT 59462 packets, 19M bytes) pkts bytes target prot opt in out source destination

    Read the article

  • Chrome not selecting correct language for Help tab

    - by Andy
    When I click Help in Chrome, a new tab appears with the Google help links etc as expected, but I have a message saying: "This Help Centre is not currently available in your language...", etc. The drop down box at the bottom is not selected correctly for en-GB (my location). Instead it is set at the first language on the list. This happens if I am signed in to my Google account or not. Selecting English from the drop-down works ok, so no great drama. Just wondering if anybody else sees this behaviour? EDIT: Using current stable build 8.0.552.224

    Read the article

  • why is iometer performance slower after first run?

    - by Dan
    I'm doing some benchmarking with IOMeter, and I'm seeing a consistent and susbtantial drop-off in performance after running the first test. These drop-offs are about the same on the three systems I've tested on, which makes me think it's a configuration setting, or just a fact of life about using IOMeter. For example, one system (local RAID 10) went from 388 I/Os per second the first run, to about 211 I/Os per second on every run after that. Everything else about the test was identical, and I also bounced the machine in between runs. So, is this expected behavior, or am I missing something?

    Read the article

  • Using Flash comboboxes with Jaws

    - by Zoe Gagnon
    I'm working on a project for a government agency which requires 508 compliance. Our product is written for Flash 10 in ActionScript 3 using Flash CS4. We are doing this 100% programatically. We have almost all of the elements working properly, but when accessing combobox components, we have a problem. The combobox can be tabbed to directly with no problem, and the drop-down can be navigated directly with the arrow keys. However, when navigating, it reads the last item in the dropdown, not the current. For example, consider a combobox with the list of selections: first, second. Jaws reads the prompt fine, but when we press the down arrow to select the first item, it reads nothing. Pressing the down arrow again (so "second" is selected) causes it to read "first". Pressing down a final time causes it to read "second". I am completely baffled by this, and it is probably as likely that we don't know how to use Jaws, or that Flash simply can't support this function properly. If you have any suggestions for how we can resolve this, I would really appreciate it.

    Read the article

  • Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

    - by Phuong Nguyen
    Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >