Search Results

Search found 3481 results on 140 pages for 'dvd region'.

Page 109/140 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • PASS Summit Location follow up - result analysis

    - by simonsabin
    I've had a chance to look at the results directly and it is clear that there is a tough choice. On the one hand people are saying that they prefer to have PASS put their money into chapters and things like 24hrs of PASS rather than an event on the east coast. Whilst at the same time almost 50% more people said they would be more likely to attend an East Coast event than a Seattle event, and 60% more said they would be more likley to attend a US Central region event. Whats more 60% said that the summit should be outside of Seattle every other year with only 19% saying it should always stay in Seattle. So clearly there is a huge desire for a non Seattle event. Looking at the other reasons for keeping in Seattle and the big one being that people want Microsoft speakers. More people think its somewhat important of very important that the conference is in walking distance of the hotels and restaurants. Essentially the Q6 questions show an even balance for normal conference, highlighting that they are prepared to travel, not with the family and they want a well laid out conference. Whats very annoying is that the questions, as people have commented, were biased towards certain answers. For instance there was no option about whether people feel its important to have industry leading speakers, MVPs etc at the conference. Only questions about Microsoft speakers. I know survey writing is very difficult to avoid biasing the answers one way or another. There was also no choice to show peoples preference, would people prefer Microsoft speakers or the summit to be held on the East Coast/Central US. I also find it amazing that people prefer hundres of developers rather than the SQLCAT and CSS teams, surely that indicates another issue about a lack of understanding of what the these teams do. All in all it is clear that people showed they want an event outside of Seattle and don't want PASS to be putting money into that instead of into other community activites. I find it suprising that there appears to have been a huge weighting against certain questions which have prioritised them over the huge desire for a PASS summit outside of Seattle. Lets see where we will be in 2013 or maybe they will rethink 2012 who knows.

    Read the article

  • Looking for an ultra portable laptop for Ubuntu

    - by prule
    Hi, I'm in the market for a new laptop, and portability is important since I really only use it when I'm travelling to and from work - primarily for programming. I've been searching high and low for something like this: less than 2kg hopefully Intel i5 (but negotiable) NO dvd drive - just don't need it 4G ram either 7200rpm disk or SSD (ssd preferable) 13 inch screen not too pricey (MacBook Air is about $1700 AUD) available in Australia The Dell Inspiron 13z and Lenovo Edge 13 look close, but I've not found anything that says I'm not going to have a fight with compatibility. The MacBook Air 13 looks like the PERFECT hardware, but I'm afraid it will just be easier to run MacOS than Ubuntu. I want to stay with Ubuntu, but the MacBook Air is only $1700 so I'm in danger of becoming another apple fanboi if I can't find anything competitive. Going through all the sites looking for stuff has been a huge waste of time System 76 doesn't deliver to Australia http://www.linux-laptop.net/ and http://www.linlap.com/ are hard work and not confidence inspiring http://www.vgcomputing.com.au/nsintro.html is hard work again, searching for every laptop they say has excellent compatibility on the web to find out what spec it is http://zareason.com/shop/Strata-Pro-13.html (at $1345 USD) looks interesting, but I've got no idea how much I'll get stung by customs importing Dell Inspiron 13z with i5, 4G, 320 7200rpm disk, ATI Mobility Radeon HD5430 - 1GB, Dell Wireless 1501 802.11b/g/n @ $1200 AUD seems like the only competitor but is it compatible? (Dell support offer no opinion - as far as they are concerned they only have 2 models that are certified for ubuntu) Am I worrying too much about the compatibility? Should I just go with Dell? Or switch to MacOS? (It would be good to have a searchable database that had the full machine specs, and compatibility - I'm thinking about building something... but I don't have much time right now...) Thanks. UPDATE I went with a MacBook Air. The price/weight/power was just right. Everything else was either too pricy (i5) or too heavy, or underpowered (SU7300 1.3GHz). Its a pity, because I didn't really want to leave Ubuntu. I'll still run it on my media center and spare (heavy) laptop.

    Read the article

  • How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x?

    - by TorakTu
    How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x ? WHAT DID WORK Installed original AMD64 version of Ubuntu 12.04 ISO image. Burned DVD and installed which shown kernel 3.2.0-23 to begin with. Got 5.1 surround sound working. Got ATI ( Now its AMD ) video drivers installed for my Radeon HD R6870 Video card from AMD's website. fglrxinfo came up and reported as normal. THE PROBLEM Kernel 3.2.0.x kept locking up so I tried higher kernel versions. But ATI / AMD Drivers do not install on any kernel Above 3.2.0.x WHAT I HAVE TRIED I have gone over this tutorial many times ( https://help.ubuntu.com/community/BinaryDriverHowto/ATI ) and it doesn't work on ANY kernel except 3.2.0.x. The problems I am having here are that the ATI / AMD drivers working for the 12.04 Precise with kernel 3.2.0-23 and 24, But the computer kept locking up. Although all my games would work, the lock ups were random and were constant. So I looked all over the web for 3 days trying to find an answer and the lock up issue was said to just update the kernel. So I did. Have tried many kernels. All of them .. no lock ups. BUT the Restricted AMD drivers from the AMD website will not install. And none of the OpenSource AMD drivers have EVER installed no matter what Kernel or version I tried. EXAMPLE OUTPUT OF 3D TYPE OF ERRORS Javax.media.opengl.GLException: glXGetConfig failed: error code GLX_NO_EXTENSION at com.sun.opengl.impl.x11.X11GLDrawableFactory.glXGetConfig(X11GLDrawableFactory.java:651) at com.sun.opengl.impl.x11.X11GLDrawableFactory.xvi2GLCapabilities(X11GLDrawableFactory.java:350) at com.sun.opengl.impl.x11.X11GLDrawableFactory.chooseGraphicsConfiguration(X11GLDrawableFactory.java:174) at javax.media.opengl.GLCanvas.chooseGraphicsConfiguration(GLCanvas.java:520) at javax.media.opengl.GLCanvas.<init>(GLCanvas.java:131) at haven.HavenPanel.<init>(HavenPanel.java:68) at haven.HavenPanel.<init>(HavenPanel.java:78) at haven.MainFrame.<init>(MainFrame.java:182) at haven.MainFrame.main2(MainFrame.java:306) at haven.MainFrame.access$100(MainFrame.java:34) at haven.MainFrame$7.run(MainFrame.java:360) at java.lang.Thread.run(Thread.java:722) And of course this is what fglrxinfo shows : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 EDIT : I forgot to mention that I DID look at this post over the last few days and it did not help.

    Read the article

  • Image first loaded, then it isn't? (XNA)

    - by M0rgenstern
    I am very confused at the Moment. I have the following Class: (Just a part of the class): public class GUIWindow { #region Static Fields //The standard image for windows. public static IngameImage StandardBackgroundImage; #endregion } IngameImage is just one of my own classes, but actually it contains a Texture2D (and some other things). In another class I load a list of GUIButtons by deserializing a XML file. public static GUI Initializazion(string pXMLPath, ContentManager pConMan) { GUI myGUI = pConMan.Load<GUI>(pXMLPath); GUIWindow.StandardBackgroundImage = new IngameImage(pConMan.Load<Texture2D>(myGUI.WindowStandardBackgroundImagePath), Vector2.Zero, 1024, 600, 1, 0, Color.White, 1.0f, true, false, false); System.Console.WriteLine("Image loaded? " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); myGUI.Windows = pConMan.Load<List<GUIWindow>>(myGUI.GUIFormatXMLPath); System.Console.WriteLine("Windows loaded"); return myGUI; } Here this line: System.Console.WriteLine("Image loaded? " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); Prints "true". To load the GUIWindows I need an "empty" constructor, which looks like that: public GUIWindow() { Name = ""; Buttons = new List<Button>(); ImagePath = ""; System.Console.WriteLine("Image loaded? (In win) " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); //Image = new IngameImage(StandardBackgroundImage); //System.Console.WriteLine( //Image.IsActive = false; SelectedButton = null; IsActive = false; } As you can see, I commented lines out in the constructor. Because: Otherwise this would crash. Here the line System.Console.WriteLine("Image loaded? (In win) " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); Doesn't print anything, it just crashes with the following errormessage: Building content threw NullReferenceException: Object reference not set to an object instance. Why does this happen? Before the program wants to load the List, it prints "true". But in the constructor, so in the loading of the list it prints "false". Can anybody please tell me why this happens and how to fix it?

    Read the article

  • AWS EC2 Oracle RDB - Storing and managing my data

    - by llaszews
    When create an Oracle Database on the Amazon cloud you will need to store you database files somewhere on the EC2 cloud. There are basically three places where database files can be stored: 1. Local drive - This is the local drive that is part of the virtual server EC2 instance. 2. Elastic Block Storage (EBS) - Network attached storage that appears as a local drive. 3. Simple Storage Server (S3) - 'Storage for the Internet'. S3 is not high speed and intended for store static document type files. S3 can also be used for storing static web page files. Local drives are ephemeral so not appropriate to be used as a database storage device. The leaves EBS which is the best place to store database files. EBS volumes appear as local disk drives. They are actually network-attached to an Amazon EC2 instance. In addition, EBS persists independently from the running life of a single Amazon EC2 instance. If you use an EBS backed instance for your database data, it will remain available after reboot but not after terminate. In many cases you would not need to terminate your instance but only stop it, which is equivalent of shutdown. In order to save your database data before you terminate an instance, you can snapshot the EBS to S3. Using EBS as a data store you can move your Oracle data files from one instance to another. This allows you to move your database from one region or or zone to another. Unfortunately, to scale out your Oracle RDS on AWS you can not have read only replicas. This is only possible with the other Oracle relational database - MySQL. The free micro instances use EBS as its storage. This is a very good white paper that has more details: AWS Storage Options This white paper also discusses: SQS, SimpleDB, and Amazon RDS in the context of storage devices. However, these are not storage devices you would use to store an Oracle database. This slide deck discusses a lot of information that is in the white paper: AWS Storage Options slideshow

    Read the article

  • PASS Summit for SQL Starters

    - by Davide Mauri
    I’ve received a buch of emails from PASS Summit “First Timers” that are also somehow new to SQL Server (for “somehow” I mean people with less than 6 month experience but with some basic knowledge of SQL Server engine) or are catching up from SQL Server 2000. The common question regards the session one should not miss to have a broad view of the entire SQL Server platform have some insight into some specific areas of SQL Server Given that I’m on (semi-)vacantion and that I have more free time (not true, I have to prepare slides & demos for several conferences, PASS Summit  - Building the Agile Data Warehouse with SQL Server 2012 - and PASS 24H - Agile Data Warehousing with SQL Server 2012 - among them…but let’s pretend it to be true), I’ve decided to make a post to answer to this common questions. Of course this is my personal point of view and given the fact that the number and quality of session that will be delivered at PASS Summit is so high that is very difficoult to make a choice, fell free to jump into the discussion and leave your feedback or – even better – answer with another post. I’m sure it will be very helpful to all the SQL Server beginners out there. I’ve imposed to myself to choose 6 session at maximum for each Track. Why 6? Because it’s the maximum number of session you can follow in one day, and given that all the session will be on the Summit DVD, they are the answer to the following question: “If I have one day to spend in training, which session I should watch?”. Of course a Summit is not like a Course so a lot of very basics concept of well-established technologies won’t be found here. Analysis Services, Integration Services, MDX are not part of the Summit this time (at least for the basic part of them). Enough with that, let’s start with the session list ideal to have a good Overview of all the SQL Server Platform: Geospatial Data Types in SQL Server 2012 Inside Unstructured Data: SQL Server 2012 FileTable and Semantic Search XQuery and XML in SQL Server: Common Problems and Best Practice Solutions Microsoft's Big Play for Big Data Dashboards: When to Choose Which MSBI Tool Microsoft BI End-User Tools 360° for what concern Database Development, I recommend the following sessions Understanding Transaction Isolation Levels What to Look for in Execution Plans Improve Query Performance by Fixing Bad Parameter Sniffing A Window into Your Data: Using SQL Window Functions Practical Uses and Optimization of New T-SQL Features in SQL Server 2012 Taking MERGE Beyond the Basics For Business Intelligence Information Delivery Analyzing SSAS Data with Excel Building Compelling Power View Reports Managed Self-Service BI PowerPivot 101  SharePoint for Business Intelligence The Best Microsoft BI Tools You've Never Heard Of and for Business Intelligence Architecture & Development BI Power Hour Building a Tabular Model Database Enterprise Information Management: Bringing Together SSIS, DQS, and MDS SSIS Design Patterns Storing Columnstore Indexes Hadoop and Its Ecosystem Components in Action Beside the listed sessions, First Timers should also take a look the the page PASS set up for them: http://www.sqlpass.org/summit/2012/Connect/FirstTimers.aspx See you at PASS Summit!

    Read the article

  • why are my players drawn top the side of my viewport

    - by Jetbuster
    Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

    Read the article

  • 13.10 upgrade dropping wifi [on hold]

    - by Daryl
    Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

  • Spotlight on an office - Nairobi, Kenya

    - by Maria Sandu
    Hi everyone, my name is Joash Mitei. I am a graduate Intern at Oracle Systems Kenya and I will briefly take you through our offices and the working environment here in Nairobi, Kenya. I’ve been with Oracle since February 2012 and I’m responsible for Applications Pre-sales focusing on Oracle EPM and E-Business Suite. My background is Finance and Accounting therefore joining Oracle was almost a totally a different ball game but the transition has been smooth. The Oracle offices here are located on the second floor of Mebank Towers. We moved to the 2nd floor just three months ago from the 5th floor mainly because of the growing workforce. We are covering the whole Eastern Africa region hence diversity in culture is evident. This is a plus since you get to interact with people of very different backgrounds, cultures and ways of thinking. The building itself is on the outskirts of the CBD hence free from the hustle and bustle of the town. The office is split into different sections; there is a main working area which has an open desk design that fosters interaction between colleagues, there are 4 conference rooms for meetings and presentations, there are 3 quiet rooms for a little privacy when needed and there is a dining area for meals and ‘hanging out’. The working environment is world-class, to say the least. The employees are very professional, quite smart and needless to say, very busy. There are 4 interns covering sales and pre-sales in both Tech and Apps. As an intern you get support from your supervisor but you are required to show initiative yourself and thus the need to be very pro-active and inquisitive. The local management is well structured and communicative to ensure effectiveness and efficiency in the office. Apart from the daily work, we usually have events to boost staff morale such as ‘TGIF hang -out’, football matches against each other or versus other companies, and team building retreats. All these are monumental in fostering the RED POTENTIAL. We also do numerous CSR activities in the local communities . Well, that’s the Kenyan office for you. Glad to be your tour guide. Have a superb day!

    Read the article

  • Summary of our Recent Pull Request Enhancements on CodePlex

    Over the past several weeks, we’ve been incrementally rolling out a bunch of enhancements around our pull request workflow for Git and Mercurial projects. Our goal is to make contributing to open source projects a simple and rewarding experience, and we’ll continue to invest in this area. Here’s a summary of the changes so far, in case you’ve missed them. As always, if you have any feedback, please let us know, whether on our ideas page or via Twitter. Support for branches You can now pick the source and destination branches for your pull request, whether you’re sending one from your fork, or using it within a project to collaborate with your other trusted contributors. A redesigned creation experience Our old pull request creation form was rather lacking. It asked for a title and comment in a small modal dialog, but that was about it. We knew we could do better, so we rethought the experience. Now, when you create a pull request, you’re taken to a new page that let’s you select the source and destination, and gives you information on the diffs and commits that you’re sending, so you can confirm that you’re sending the right set of changes. Inline code snippets in discussion If users comment on code in your pull request, we now display a preview of the snippet of relevant code inline with their comment on the discussion. Subsequent replies on that line are combined in a single thread to preserve your context. No more clicking and hunting to find where the comments are. And you can add another inline comment right from the discussion area. Comment notifications You can now elect receive an e-mail notification if a user comments on your pull request. If it’s on a line of code, we’ll display the relevant code snippet in the e-mail. Redesigned diff viewer Our old diff viewer hadn’t been touched in a while, and was in need of an update. We started with a visual facelift to use standard red/green colors for additions/deletions and remove the noisy “dots” that represented spaces and that littered the diff viewer. Based on feedback that the viewable region for diffs was too small, especially for smaller screen resolutions, we revamped the way the viewport for the code is sized, and now expand it to fill the majority of the browser height when scrolling down. The set of improvements we implemented here also apply anywhere diffs are viewed, not just for pull requests.

    Read the article

  • From 20,663 issues to 1 issue&ndash;style-copping C5.Tests

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/05/28/from-20663-issues-to-1-issuendashstyle-copping-c5.tests.aspxI recently became interested in the potential of the C5 Collections solution from http://www.itu.dk/research/c5/, however I was dismayed at the state of the code in the unit test project, so I set about fixing the 20,663 issues detected by StyleCop. The tools I used were the latest versions of: My 64-bit development PC running Windows 8 Update with 8Gb RAM Visual Studio 2013 Ultimate with SP2 ReSharper GhostDoc Pro My first attempt had to be abandoned due to collision of class names which broke one of the unit tests. So being aware of this duplication of class names, I started again and planned to prepend the class names with the namespace name. In some cases I additionally prepended the item of the C5 collection that was being tested. So what was the condition of code at the start? Besides the sprawl of C# code not written to style cop standard, there was: 1) Placing of many classes within one physical file. 2) Namespace within name space that did not follow the project structure. 3) As already mentioned, duplication of class names across namespaces. 4) A copyright notice that spawled but had to be preserved. 5) Project sub-folders were all lower case instead of initial letter capitalised. The first step was to add a stylecop heading plus the original heading contained within a region, to every file. The next step was to run GhostDoc Pro using its “Document File” option on every file but not letting it replace the headers, I had added. This brought the number of issues down to 18,192. I then went through each file collapsing each class and prepending names as appropriate. At each step, I saved the changes to my local Git. The step was to move each class to its own file and to style-cop each file. ReSharper provides a very useful feature for doing this which also fixes missing “this.” and moves using statements inside the namespace. Some classes required minimal work whereas others required extensive work to reach the stylecop standard. The unit tests were run at each split and when each class was completed. When all was done, one issue remained which I will need to submit to stylecop team for their advice (and possibly a fix to stylecop). The updated solution has been made available at https://c5stylecopped.codeplex.com/releases/view/122785.

    Read the article

  • Strangling the life out of Software Testing

    - by MarkPearl
    I recently did a course at the local university on Software Engineering. At the beginning of the course I looked over the outline of the subject and there seemed to be some really good content. It covered traditional & agile project methodologies, some general communication and modelling chapters and finished off with testing. I was particularly excited to see the section on testing as this was something I learnt on my own and see great value in. The course has now just ended and I am very disappointed. I now know one of the reasons why so few people i.e. in my region do Test Driven Development, or perform even basic testing methodologies. The topic was to academic! Yes, you might be able to list 4 different types of black box test approaches vs. white box test approaches and describe the characteristics of Smoke Tests, but never during course did we see an example of an actual test or how it might be implemented! In fact, if I did not have personal experience of applying testing in actual projects, I wouldn’t even know what a unit test looked like. Now, what worries me is the following… It took us 6 months to cover the course material, other students more than likely came out of that course with little appreciation of the subject – in fact they now have a very complex view of what a test is – so complex that I think most of them will never attempt it again on their own. Secondly, imagine studying to be a dentist without ever actually seeing a tooth? Yes, you might be able to describe a tooth, and know what it is made out of – but nobody would want a dentist who has never seen a tooth to operate on them. Yet somehow we expect people studying software engineering to do the same? This is not right. Now, before I finish my rant let me say that I know this is not the same everywhere in the world, and that there needs to be a balance on practical implementation and academic understanding – I am just disappointed that this does not seem to be happening at the institution that I am currently studying at ;-( Please, if you happen to be a lecturer or teacher reading this post – a combination of theory and practical's goes a long way. We need to up the quality of software being produced and that starts at learner level!

    Read the article

  • Oracle Solaris 11 ?????????:?Oracle Solaris 11 ?????·????·??? ?2????

    - by kazun
    2012?2?20???????????? ??13F????????????Oracle Solaris 11???????????Oracle Solaris 11 ?????·????·????????????????????????2??????????Automated Installer(AI)???Distribution Constructor??????????????????????????????50????????????????????????????????? Oracle Solaris 11 ????????? - ?????????????????? - ???????????????????????? - 2????????????????? ???? Oracle 11 ??????? ?Oracle Solaris 11 ??????????????·??????????(???????? ??????????? ????????????? ??? ??? ??:???)???Oracle Solaris 11????????????????????????? Oracle Solaris 11 ???Oracle Solaris 10 ??????????????????????????2?????????????????(????????GUI???)???????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????? ???????????????:Automated Installer ????????"hands-free"??????????? Automated Installer?(?? ???????????? ??????????? ?????????????? ??????????????:???)???Oracle Solaris 11 ???????Automated Installer (AI)????????? AI????????????????????Solaris Zones ???????????????????????????????????????????????????????????????????????????????????????Jumpstart ?????????????????? AI?Image Packaging System (IPS)????????????????????????????????????OS???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????AI??????(XML?????????????)?SC???????????????????????????????????????????????????????????????????????? ??????????????????????????????????AI ???????????DHCP ????????????????????????????? VirtualBox ??????????????? ?:Oracle Solaris Studio ??? AI??????????????????????? ?????????? ???????????????????:Distribution Constructor ?????????????????????????????????????????????? Distribution Constructor?(?? ???????????? ??????????? ????????????? ??????????????:???)???? ?????????Oracle Solaris 11 ????????????????????????????????????? "Distribution Constructor" ?????????????"Distribution Constructor" ???????????????????????????????????????????????????????????????????????????"Distribution Constructor"???LiveCD/USB???????????????ISO?????3???OS?????????????????????Distribution Constructor?????????????????????????????????????????????????????????????????????Distribution Constructor??Solaris ?ZFS???????????AI??????????????????????????XML??????????? ?????????3??????????????????????????????????????????????????????IPS??????????????custom-script????????????????????????????????????????????????????????????????????????? ???????????????????????????????? ?????????? Oracle Solaris ??????? ??????????Installer Disk(3??DVD)????????????????????????Oracle Solaris Live CD(x86)??1???Oracle Solaris 11 Interactive Text Installer??SPARC??x86?????1???????????Live CD??????????Solaris 11 ?????????????????????Interactive Text Installer ??????????????(???????????????????????????????)?Interactive Text Installer ???????????????????????????????????? ???Solaris 11 VM???? for Oracle VM VirtualBox ?????????????????????(?Solaris 11 VM ???? for Oracle VM VirtualBox ???????Oracle VM for x86 ????????)? Oracle VM VirtualBox??????? Solaris 11 VM???? for Oracle VM VirtualBox??????? Oracle Solaris 11?????????????????????????? ?????? Oracle Solaris 10 JumpStart ?? Oracle Solaris 11 ???????????? ???? Oracle Solaris 11 ????????????? Oracle Solaris 11 ???????????

    Read the article

  • Unable to Install SQL Server on Server 2012

    - by Jeff
    The problem I have been trying to install SQL Server 2012 on Windows Server 2012. I continually get the same error: Managed SQL Server Installer has stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: scenarioengine.exe Problem Signature 02: 11.0.3000.0 Problem Signature 03: 5081b97a Problem Signature 04: Microsoft.SqlServer.Chainer.Setup Problem Signature 05: 11.0.3000.0 Problem Signature 06: 5081b97a Problem Signature 07: 18 Problem Signature 08: 0 Problem Signature 09: System.IO.FileLoadException OS Version: 6.2.9200.2.0.0.272.79 Locale ID: 1033 Additional Information 1: c319 Additional Information 2: c3196e5863e32e0baf269d62f56cbc70 Additional Information 3: 422d Additional Information 4: 422d950c58f4efd1ef1d8394fee5d263 What I've tried After initial googling, I've tried the following things: Go through the list of hardware and software pre-reqs. All the software seems to be there by default on Server 2012 and my hardware meets the reqs. Copy the installation media to the local drive and try to install from that (rather than a DVD). This produced the same error. Based on another error message, I installed .NET 4.0 (which apparently is not on Server 2012 out of the box). Same error. Install from command line. This didn't work either, but it gave me a different error: Error: Unhandled Exception: System.IO.FileLoadException: Could not load file or assembl y 'Microsoft.SqlServer.Configuration.Sco, Version=11.0.0.0, Culture=neutral, Pub licKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A) ---> System.Security.SecurityExcep tion: Strong name validation failed. (Exception from HRESULT: 0x8013141A) --- End of inner exception stack trace --- at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.CheckForBoo leanInputSettingExistenceFromCommandLine(ServiceContainer context, String settin gName) at Microsoft.SqlServer.Chainer.Setup.Setup.DebugBreak(ServiceContainer contex t) at Microsoft.SqlServer.Chainer.Setup.Setup.Main() Any ideas what I am missing?

    Read the article

  • Cannot reactivate RAID-5 volume: The size of the plex member is invalid

    - by Ian Boyd
    We had a 3-drive Windows Server 2008 R2 RAID-5 fail (operating in redundancy mode): WDC 1 TB WDC 1 TB WDC 1 TB We removed the failed hard drive, and put a WDC 1 TB drive (that we had standing by) into the machine. When launched, Disk Manager, asked permission to "initialize" the disk as either: Master Boot Record (MBR) Guid Partition Table (GPT) We initialized the disk as GPT, converted it to dynamic, and tried to use the Repair Volume command - except it was greyed out. (which is a terrifying thing on a failed production server hosting 3 virtual servers) i tried from the diskpart command line tool. First we look for our RAID-5 volume that is in Failed Rd mode: DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 E VMs (Raid5) NTFS RAID-5 1863 GB Failed Rd Volume 1 D DVD-ROM 0 B No Media Volume 2 System Rese NTFS Partition 100 MB Healthy System Volume 3 C NTFS Partition 1862 GB Healthy Boot There, Volume 0. Make that our active context: DISKPART> select volume 0 Volume 0 is the selected volume. Now we need to find the disk we will be repairing the volume with: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk 1 Online 931 GB 931 GB * Disk 2 Online 1863 GB 0 B Disk 3 Online 931 GB 0 B * Disk M0 Missing 0 B 0 B * The disk with 931 GB free, Disk 1. Now we just need to repair the volume: DISKPART> repair disk=1 Virtual Disk Service error: The size of the plex member is invalid.

    Read the article

  • blu-ray archiving in vmware ESXi 4

    - by spacecadet77
    Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

    Read the article

  • Linux e1000e (Intel networking driver) problems galore, where do I start?

    - by Evan Carroll
    I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

    Read the article

  • Email with extra '.com' behind sender email address

    - by CHT
    Currently I had a situation where I sent an email to [email protected], but when I receive mail from [email protected], it showed as [email protected], with extra '.com' behind the email address, this just happen within this week. Before this, I didn't change any setting, currently I am using Outlook 2010. When I checked the email in webmail, it also showed it as [email protected]. It seem that it has nothing to do with Outlook. However, I also tried on Thunderbird 16.0.1, but still the problem is the same. Has anyone experienced this before? Is the problem caused by the sender or receiver? Header Message as below: Return-Path: [email protected] Received: from colo4.roaringpenguin.com (not-assigned.privatedns.com [174.142.115.36] (may be forged)) by pioneerpos.com (8.12.11/8.12.11) with ESMTP id q9V6OsKU032650 for [email protected]; Wed, 31 Oct 2012 01:24:55 -0500 Received: from mail.pointsoft.com.tw (pointsoft.com.tw [59.124.242.126]) by colo4.roaringpenguin.com (8.14.3/8.14.3/Debian-9.4) with ESMTP id q9V6OmN0026374 for [email protected]; Wed, 31 Oct 2012 02:24:50 -0400 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01CDB730.6B3D5A51" Subject: =?big5?B?scTByrPmLblzpfM=?= Date: Wed, 31 Oct 2012 14:25:16 +0800 Message-ID: X-MS-Has-Attach: yes X-MS-TNEF-Correlator: thread-topic: =?big5?B?scTByrPmLblzpfM=?= thread-index: Ac23MH3YpZuLx2ejTYqR5PfoZ+IoBw== X-Priority: 1 Priority: Urgent Importance: high From: "Alice" [email protected] To: "Bob" [email protected] X-Spam-Score: undef - pointsoft.com.tw is whitelisted. X-CanIt-Geo: ip=59.124.242.126; country=TW; region=03; city=Taipei; latitude=25.0392; longitude=121.5250; http://maps.google.com/maps?q=25.0392,121.5250&z=6 X-CanItPRO-Stream: pioneerpos-com:default (inherits from rp-customers:default,base:default) X-Canit-Stats-ID: 02IhGoMJb - 2e7fa924443e - 20121031 X-CanIt-Archive-Cluster: irqpXI7aJGyo4Ewta7qVH399FOg X-Scanned-By: CanIt (www . roaringpenguin . com) on 174.142.115.36

    Read the article

  • Installing SQL Server 2008 on Windows 7 64-bit

    - by harriyott
    I'm having a shocking time trying to install SQL Server 2008 on 64-bit Windows 7. When I run setup.exe, I get the following error message: Microsoft .NET Framework 3.5 installation has failed. SQL Server 2008 Setup requires .NET Framework 3.5 to be installed Things I've tried: I've checked and double checked. I do have .NET Framework 3.5 installed, with SP1 I've read about a missing Windows Installer 4.5 installation producing the same error. Win7 comes with Windows Installer 5, which hopefully satisfies this requirement, as I've tried to install 4.5 and it won't let me Burning the ISO to DVD and installing from there. Installing on an XP machine using the same ISO. This works, so the ISO must be fine. Considering SQL Server 2005, but it really needs to be 2008 for the project. Update Creating a slipstream version gives the same error Update I could install SQL Server Express, and then SP1, but couldn't upgrade to Enterprise. If you've come across this issue, or know how to fix it, I'd love to know.

    Read the article

  • BSOD Before Windows Will Loads - Graphics Related

    - by Brian
    Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • Why is usable RAM less than total RAM?

    - by D Connors
    My girlfriend bought a laptop last week. It's a core 2 duo with 4 GB We installed vista 64bit, and one of the first things we did was right click on "My computer" to see gthe properties. Immediately we noticed something strange about her RAM, the line said: Installed memory (RAM): 4,00 GB (3,68 GB usable) I told her not to worry, thinking it must be something about the laptop hardware (considering her vista installation came from the same DVD as mine, and I never noticed anything like that on my 4 GB desktop). One hour ago, it got worse. We looked at Properties again, and it now says: Installed memory (RAM): 4,00 GB (2,98 GB usable) What does that mean? Are those 1,02 GB missing or being used by the system? EDIT: There is a possibility that the sytem information is wrong. I just noticed that it reports an intel T6500 processor, when it's actually a T6400. How can I find out how much RAM is really available to the system? EDIT2: Checking the resource monitors, it says 1003 MB are reserved for the hardware. Is that good or bad? Thanks

    Read the article

  • PXE with WDS & Windows Server 2012 - no filename option in DHCP lease?

    - by user1799
    I'm trying to configure Windows Server 2012 (a virtual box VM) with WDS so I can PXE boot some Windows 7 VMs (also virtual box). All the machines involved are only attached to the "host only network", 192.168.56.0/24. The Server 2012 machine has been setup as an AD DS machine, has DNS installed and working along with DHCP with option 60 - PXEClient - set and WDS is set to not listen on DHCP ports. I've followed http://technet.microsoft.com/en-us/library/jj648426.aspx very closely. I've used the boot.wim and install.wim files from the Win 7 installation DVD and they're configured as 'boot' and 'installation' images respectively. When I boot the target machine, it gets an IP address, but I simply get 'no filename' and the boot won't proceed any further. I've tried setting option 66 to 192.168.56.2 (the WDS server) and option 67 to both Boot\x64\wdsnbp.com and Boot\x64\pxeboot.n12 but all to no avail. I can't seem to see anything in the event log, either. Can anyone out there spot what I'm doing wrong? Or give tips to narrow down a diagnostic?

    Read the article

  • Windows 7 install detects SSD but doesn't list it to install to

    - by Mohamed Meligy
    I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

    Read the article

  • Triple boot WIndows 7, Windows 8, and Mountain Lion on Macbook Pro

    - by Nathan
    Ok, So I have a bit of a unique situation here I could use some help on. I've modded my summer 2011 MBPro to have 2 harddrives by replacing the optical drive. OSX Mountain Lion is installed on a single partition of a 120GB SSD. The second drive is 750GB, partitioned as 550GB, 150GB, and ~50GB. I've set the 550GB to act as my OSX homefolder, but I'd like to install windows 7 and Windows 8 on the remaining partitions. It Took a while, but by following this guide, I eventually found a way to install Windows without a CD/DVD drive by following this http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdrive-with-virtualbox/ It worked flawlessly for creating both windows 7 and windows 8 images that I could clone onto FAT32 partitions. However, I have encountered a problem when trying to triple boot. After I put Windows 8 onto the ~50GB partition and tried to boot into windows 7 I get an error that says something like: error: 0x0000000e The Boot selection failed because the required device is inaccessible. If I re-clone the windows 7 image onto the drive and select the option to "replace BCD" file for the drive, windows 7 will boot but windows 8 now gives me the same exact error. I realize this is a pretty extensive setup, but if anyone has some insight I'd love to hear it.

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >