Search Results

Search found 2878 results on 116 pages for 'dvd writer'.

Page 109/116 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• Emit Knowledge - social network for knowledge sharing

  - by hajan

  Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

  Read the article

• Get Information to Your Blog with Microsoft Broadcaster

  - by Matthew Guay

  Do you often have people ask you for advice about technology, or do you write tech-focused blog or newsletter?  Here’s how you can get information to share with your readers about Microsoft technology with Microsoft Broadcaster. Microsoft Broadcaster is a new service from Microsoft to help publishers, bloggers, developers, and other IT professionals find relevant information and resources from Microsoft.  You can use it to help discover things to write about, or simply discover new information about the technology you use.  Broadcaster will also notify you when new resources are available about the topics that interest you.  Let’s look at how you could use this to expand your blog and help your users. Getting Started Head over to the Microsoft Broadcaster site (link below), and click Join to get started. Sign in with your Windows Live ID, or create a new account if you don’t already have one. Near the bottom of the page, add information about your blog, newsletter, or group that you want to share Broadcaster information with.  Click Add when you’re done entering information.  You can enter as many sites or groups as you wish. When you’ve entered all of your information, click the Apply button at the bottom of the page.  Broadcaster will then let you know your information has been submitted, but you’ll need to wait several days to see if you are approved or not. Our application was approved about 2 days after applying, though this may vary.  When you’re approved, you’ll receive an email letting you know.  Return to the Broadcaster website (link below), but this time, click Sign in. Accept the terms of use by clicking I Accept at the bottom of the page. Confirm that your information entered previously is correct, and then click Configure my keywords at the bottom of the page. Now you can pick the topics you want to stay informed about.  Type keywords in the textbox, and it will bring up relevant topics with IntelliSense. Here we’ve added several topics to keep up with. Next select the Microsoft Products you want to keep track of.  If the product you want to keep track of is not listed, make sure to list it in the keywords section as above. Finally, select the types of content you wish to see, including articles, eBooks, webcasts, and more. Finally, when everything’s entered, click Configure My Alerts at the bottom of the page. Broadcaster can automatically email you when new content is found.  If you would like this, click Subscribe.  Otherwise, simply click Access Dashboard to go ahead and find your personalized content. If you choose to receive emails of new content, you’ll have to configure it with Windows Live Alerts.  Click Continue to set this up. Select if you want to receive Messenger alerts, emails, and/or text messages when new content is available.  Click Save when you’re finished. Finally, select how often you want to be notified, and then click Access Dashboard to view the content currently available. Finding Content For Your Blog, Site, or Group Now you can find content specified for your interests from the dashboard.  To access the dashboard in the future, simply go to the Broadcaster site and click Sign In. Here you can see available content, and can search for different topics or customize the topics shown. You’ll see snippets of information from various Microsoft videos, articles, whitepapers, eBooks, and more, depending on your settings.  Click the link at the top of the snippet to view the content, or right-click and copy the link to use in emails or on social networks like Twitter. If you’d like to add this snippet to your website or blog, click the Download content link at the bottom.   Now you can preview what the snippet will look like on your site, and change the width or height to fit your site.  You can view and edit the source code of the snippet from the box at the bottom, and then copy it to use on your site. Copy the code, and paste it in the HTML of a blog post, email, webpage, or anywhere else you wish to share it.  Here we’re pasting it into the HTML editor in Windows Live Writer so we can post it to a blog. After adding a title and opening paragraph, we have a nice blog post that only took a few minutes to put together but should still be useful for our readers.  You can check out the blog post we created at the link below. Readers can click on the links, which will direct them to the content on Microsoft’s websites. Conclusion If you frequently need to find educational and informative content about Microsoft products and services, Broadcaster can be a great service to keep you up to date.  The service worked quite good in our tests, and generally found relevant content to our keywords.  We had difficulty embedding links to eBooks that were listed by Broadcaster, but everything else worked for us.  Now you can always have high quality content to help your customers, coworkers, friends, and more, and you just might find something that will help you, too! Link Microsoft Broadcaster (registration required) Example Post at Techinch.com with Content from Microsoft Broadcaster Similar Articles Productive Geek Tips Create An Electronic Business Card In Outlook 2007Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPAnnouncing the How-To Geek BlogsNew Vista Syntax for Opening Control Panel Items from the Command-lineHow To Create and Publish Blog Posts in Word 2010 & 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Fix Common Inkjet Printer Errors Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com

  Read the article

• What Makes a Good Design Critic? CHI 2010 Panel Review

  - by Applications User Experience

  Author: Daniel Schwartz, Senior Interaction Designer, Oracle Applications User Experience Oracle Applications UX Chief Evangelist Patanjali Venkatacharya organized and moderated an innovative and stimulating panel discussion titled "What Makes a Good Design Critic? Food Design vs. Product Design Criticism" at CHI 2010, the annual ACM Conference on Human Factors in Computing Systems. The panelists included Janice Rohn, VP of User Experience at Experian; Tami Hardeman, a food stylist; Ed Seiber, a restaurant architect and designer; Jonathan Kessler, a food critic and writer at the Atlanta Journal-Constitution; and Larry Powers, Chef de Cuisine at Shaun's restaurant in Atlanta, Georgia. Building off the momentum of his highly acclaimed panel at CHI 2009 on what interaction design can learn from food design (for which I was on the other side as a panelist), Venkatacharya brought together new people with different roles in the restaurant and software interaction design fields. The session was also quite delicious -- but more on that later. Criticism, as it applies to food and product or interaction design, was the tasty topic for this forum and showed that strong parallels exist between food and interaction design criticism. Figure 1. The panelists in discussion: (left to right) Janice Rohn, Ed Seiber, Tami Hardeman, and Jonathan Kessler. The panelists had great insights to share from their respective fields, and they enthusiastically discussed as if they were at a casual collegial dinner. Jonathan Kessler stated that he prefers to have one professional critic's opinion in general than a large sampling of customers, however, "Web sites like Yelp get users excited by the collective approach. People are attracted to things desired by so many." Janice Rohn added that this collective desire was especially true for users of consumer products. Ed Seiber remarked that while people looked to the popular view for their target tastes and product choices, "professional critics like John [Kessler] still hold a big weight on public opinion." Chef Powers indicated that chefs take in feedback from all sources, adding, "word of mouth is very powerful. We also look heavily at the sales of the dishes to see what's moving; what's selling and thus successful." Hearing this discussion validates our design work at Oracle in that we listen to our users (our diners) and industry feedback (our critics) to ensure an optimal user experience of our products. Rohn considers that restaurateur Danny Meyer's book, Setting the Table: The Transforming Power of Hospitality in Business, which is about creating successful restaurant experiences, has many applicable parallels to user experience design. Meyer actually argues that the customer is not always right, but that "they must always feel heard." Seiber agreed, but noted "customers are not designers," and while designers need to listen to customer feedback, it is the designer's job to synthesize it. Seiber feels it's the critic's job to point out when something is missing or not well-prioritized. In interaction design, our challenges are quite similar, if not parallel. Software tasks are like puzzles that are in search of a solution on how to be best completed. As a food stylist, Tami Hardeman has the demanding and challenging task of presenting food to be as delectable as can be. To present food in its best light requires a lot of creativity and insight into consumer tastes. It's no doubt then that this former fashion stylist came up with the ultimate catch phrase to capture the emotion that clients want to draw from their users: "craveability." The phrase was a hit with the audience and panelists alike. Sometime later in the discussion, Seiber remarked, "designers strive to apply craveability to products, and I do so for restaurants in my case." Craveabilty is also very applicable to interaction design. Creating straightforward and smooth workflows for users of Oracle Applications is a primary goal for my colleagues. We want our users to really enjoy working with our products where it makes them more efficient and better at their jobs. That's our "craveability." Patanjali Venkatacharya asked the panel, "if a design's "craveability" appeals to some cultures but not to others, then what is the impact to the food or product design process?" Rohn stated that "taste is part nature and part nurture" and that the design must take the full context of a product's usage into consideration. Kessler added, "good design is about understanding the context" that the experience necessitates. Seiber remarked how important seat comfort is for diners and how the quality of seating will add so much to the complete dining experience. Sometimes if these non-food factors are not well executed, they can also take away from an otherwise pleasant dining experience. Kessler recounted a time when he was dining at a restaurant that actually had very good food, but the photographs hanging on all the walls did not fit in with the overall décor and created a negative overall dining experience. While the tastiness of the food is critical to a restaurant's success, it is a captivating complete user experience, as in interaction design, which will keep customers coming back and ultimately making the restaurant a hit. Figure 2. Patnajali Venkatacharya enjoyed the Sardian flatbread salad. As a surprise Chef Powers brought out a signature dish from Shaun's restaurant for all the panelists to sample and critique. The Sardinian flatbread dish showcased Atlanta's taste for fresh and local produce and cheese at its finest as a salad served on a crispy flavorful flat bread. Hardeman said it could be photographed from any angle, a high compliment coming from a food stylist. Seiber really enjoyed the colors that the dish brought together and thought it would be served very well in a casual restaurant on a summer's day. The panel really appreciated the taste and quality of the different components and how the rosemary brought all the flavors together. Seiber remarked that "a lot of effort goes into the appearance of simplicity." Rohn indicated that the same notion holds true with software user interface design. A tremendous amount of work goes into crafting straightforward interfaces, including user research, prototyping, design iterations, and usability studies. Design criticism for food and software interfaces clearly share many similarities. Both areas value expert opinions and user feedback. Both areas understand the importance of great design needing to work well in its context. Last but not least, both food and interaction design criticism value "craveability" and how having users excited about experiencing and enjoying the designs is an important goal. Now if we can just improve the taste of software user interfaces, people may choose to dine on their enterprise applications over a fresh organic salad.

  Read the article

• Source-control 'wet-work'?

  - by Phil Factor

  When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

  Read the article

• Community Outreach - Where Should I Go

  - by Roger Brinkley

  A few days ago I was talking to person new to community development and they asked me what guidelines I used to determine the worthiness of a particular event. After our conversation was over I thought about it a little bit more and figured out there are three ways to determine if any event (be it conference, blog, podcast or other social medias) is worth doing: Transferability, Multiplication, and Impact. Transferability - Is what I have to say useful to the people that are going to hear it. For instance, consider a company that has product offering that can connect up using a number of languages like Scala, Grovey or Java. Sending a Scala expert to talk about Scala and the product is not transferable to a Java User Group, but a Java expert doing the same talk with a Java slant is. Similarly, talking about JavaFX to any Java User Group meeting in Brazil was pretty much a wasted effort until it was open sourced. Once it was open sourced it was well received. You can also look at transferability in relation to the subject matter that you're dealing with. How transferable is a presentation that I create. Can I, or a technical writer on the staff, turn it into some technical document. Could it be converted into some type of screen cast. If we have a regular podcast can we make a reference to the document, catch the high points or turn it into a interview. Is there a way of using this in the sales group. In other words is the document purely one dimensional or can it be re-purposed in other forms. Multiplication - On every trip I'm looking for 2 to 5 solid connections that I can make with developers. These are long term connections, because I know that once that relationship is established it will lead to another 2 - 5 from that connection and within a couple of years were talking about some 100 connections from just one developer. For instance, when I was working on JavaHelp in 2000 I hired a science teacher with a programming background. We've developed a very tight relationship over the year though we rarely see each other more than once a year. But at this JavaOne, one of his employees came up to me and said, "Richard (Rick Hard in Czech) told me to tell you that he couldn't make it to JavaOne this year but if I saw you to tell you hi". Another example is from my Mobile & Embedded days in Brasil. On our very first FISL trip about 5 years ago there were two university students that had created a project called "Marge". Marge was a Bluetooth framework that made connecting bluetooth devices easier. I invited them to a "Sun" dinner that evening. Originally they were planning on leaving that afternoon, but they changed their plans recognizing the opportunity. Their eyes were as big a saucers when they realized the level of engineers at the meeting. They went home started a JUG in Florianoplis that we've visited more than a couple of times. One of them went to work for Brazilian government lab like Berkley Labs, MIT Lab, John Hopkins Applied Physicas Labs or Lincoln Labs in the US. That presented us with an opportunity to show Embedded Java as a possibility for some of the work they were doing there. Impact - The final criteria is how life changing is what I'm going to say be to the individuals I'm reaching. A t-shirt is just a token, but when I reach down and tug at their developer hearts then I know I've succeeded. I'll never forget one time we flew all night to reach Joan Pasoa in Northern Brazil. We arrived at 2am went immediately to our hotel only to be woken up at 6 am to travel 2 hours by car to the presentation hall. When we arrived we were totally exhausted. Outside the facility there were 500 people lined up to hear 6 speakers for the day. That itself was uplifting.  I delivered one of my favorite talks on "I have passion". It was a talk on golf and embedded java development, "Find your passion". When we finished a couple of first year students came up to me and said how much my talk had inspired them. FISL is another great example. I had been about 4 years in a row. FISL is a very young group of developers so capturing their attention is important. Several of the students will come back 2 or 3 years later and ask me questions about research or jobs. And then there's Louis. Louis is one my favorite Brazilians. I can only describe him as a big Brazilian teddy bear. I see him every year at FISL. He works primarily in Java EE but he's attended every single one of my talks over the last 4 years. I can't tell you why, but he always greets me and gives me a hug. For some reason I've had a real impact. And of course when it comes to impact you don't just measure a presentation but every single interaction you have at an event. It's the hall way conversations, the booth conversations, but more importantly it's the conversations at dinner tables or in the cars when you're getting transported to an event. There's a good story that illustrates this. Last year in the spring I was traveling to Goiânia in Brazil. I've been there many times and leaders there no me well. One young man has picked me up at the airport on more than one occasion. We were going out to dinner one evening and he brought his girl friend along. One thing let to another and I eventually asked him, in front of her, "Why haven't you asked her to marry you?" There were all kinds of excuses and she just looked at him and smiled. When I came back in December for JavaOne he came and sought me. "I just want to tell you that I thought a lot about what you said, and I asked her to marry me. We're getting married next Spring." Sometimes just one presentation is all it takes to make an impact. Other times it takes years. Some impacts are directly related to the company and some are more personal in nature. It doesn't matter which it is because it's having the impact that matters.

  Read the article

• Source-control 'wet-work'?

  - by Phil Factor

  When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

  Read the article

• What would cause an .exe to vanish without a trace?

  - by Peter pete

  I have a few computers. One computer, at home, one day suddenly had its pgbouncer.exe vanish. The antivirus didn't have it in its virus chest [avast]. I couldn't find the bgbouncer anywhere. All the other pgbouncer files remained where they used to be, except the exe had vanished. I hadn't uninstalled it, nor had anyone else used the machine. I hadn't installed any new software since the previous time I had used it either. Just now, however, my TV computer was running out of disk space, which was weird because I had python setup to do transcoding and archiving. I logged in and voila! python.exe had vanished !! Once again, Avast.exe didn't have it in its virus chest, and dunno! I do this time, with the TV computer, know exactly the date that python vanished. Sat the 18th my python scripts ran fine. Sat the 19th python was gone. I'm going to do some hunting in the event log to see what happened that day. But if anyone has experienced vanishings before and has a clue what happened, I would like to know. FYI: Both computers (bgbouncer vanish and python vanish) were running Win7 with the RDP hack and both on SSDs and both with Avast. Both computers had all windows updates set to manual(to prevent random stuff changing!) and neither had recently had any windows updates manually applied. FYI2: Tv computer had since the beginning of October dropbox running all the time trying to download two files. Sadly, a temporary download of each of these two files by dropbox resulted in Avast freaking out and virus-chesting them, and then dropbox downloading them partially again, before being dropboxed. Now, these two files were binaries from a program I had personally written and were clean on other machines. Since the python vanishing I have deleted these two binaries from dropbox (using the website) and dropbox exe on the tv computer is now at peace. I don't think this should cause python.exe to vanish though :/ New edit: On the 18/10/2013, at 0742 my python script ended with an error: "file still in use" which was unexpected but I shrugged it off since sometimes media portal doesn't release the recording. But on second thoughts is weird since the show in use would have been finished recording the day before. On the 18/10/2013 at 0807 the windows event log complains that several drivers required for CutePDF, send to onenote 2010, send to onenote 2013, microsoft xps document writer aren't installed. I just checked now and indeed those printers have vanished! New update! I found my python.exe that had been removed. It was still in the C:\Python33\ directory except it had been renamed to a random string charater.tmp (ie, it was made into a temp file) with a creation date of 19/10/2013 at 0600:02 am. Now, the computer normally wakes at 6am to do transcoding. What could have moved my python file into a tmp file?

  Read the article

• How Can I Safely Destroy Sensitive Data CDs/DVDs?

  - by Jason Fitzpatrick

  You have a pile of DVDs with sensitive information on them and you need to safely and effectively dispose of them so no data recovery is possible. What’s the most safe and efficient way to get the job done? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader HaLaBi wants to know how he can safely destroy CDs and DVDs with personal data on them: I have old CDs/DVDs which have some backups, these backups have some work and personal files. I always had problems when I needed to physically destroy them to make sure no one will reuse them. Breaking them is dangerous, pieces could fly fast and may cause harm. Scratching them badly is what I always do but it takes long time and I managed to read some of the data in the scratched CDs/DVDs. What’s the way to physically destroy a CD/DVD safely? How should he approach the problem? The Answer SuperUser contributor Journeyman Geek offers a practical solution coupled with a slightly mad-scientist solution: The proper way is to get yourself a shredder that also handles cds – look online for cd shredders. This is the right option if you end up doing this routinely. I don’t do this very often – For small scale destruction I favour a pair of tin snips – they have enough force to cut through a cd, yet are blunt enough to cause small cracks along the sheer line. Kitchen shears with one serrated side work well too. You want to damage the data layer along with shearing along the plastic, and these work magnificently. Do it in a bag, cause this generates sparkly bits. There’s also the fun, and probably dangerous way – find yourself an old microwave, and microwave them. I would suggest doing this in a well ventilated area of course, and not using your mother’s good microwave. There’s a lot of videos of this on YouTube – such as this (who’s done this in a kitchen… and using his mom’s microwave). This results in a very much destroyed cd in every respect. If I was an evil hacker mastermind, this is what I’d do. The other options are better for the rest of us. Another contributor, Keltari, notes that the only safe (and DoD approved) way to dispose of data is total destruction: The answer by Journeyman Geek is good enough for almost everything. But oddly, that common phrase “Good enough for government work” does not apply – depending on which part of the government. It is technically possible to recover data from shredded/broken/etc CDs and DVDs. If you have a microscope handy, put the disc in it and you can see the pits. The disc can be reassembled and the data can be reconstructed — minus the data that was physically destroyed. So why not just pulverize the disc into dust? Or burn it to a crisp? While technically, that would completely eliminate the data, it leaves no record of the disc having existed. And in some places, like DoD and other secure facilities, the data needs to be destroyed, but the disc needs to exist. If there is a security audit, the disc can be pulled to show it has been destroyed. So how can a disc exist, yet be destroyed? Well, the most common method is grinding the disc down to destroy the data, yet keep the label surface of the disc intact. Basically, it’s no different than using sandpaper on the writable side, till the data is gone. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• Extra Life 2012 - The Final Plea ... Until the Next One

  - by Chris Gardner

  I thought I'd share the email stream that my friends and family get about the event.So, here we are again. We scream closer to the event, and the goal is not met.I was approached by the ghost of feral platypii past last night. Well, approached is putting it lightly. I was mugged by the ghost of platypii past last night. He reminded me, in no uncertain terms that I have only reached the midway point of my fundraising goal. He then reminded me, in even less uncertain terms, that we are one week away from the event. There were other reminders past that, but this is a family broadcast. *shudder*Now, let us be serious for a moment. The event organizers claim a personal story helps to tug heart strings, whatever those are...I've been to Children's Hospital of Birmingham. I had to take Spawn, the Latter, there to verify she was not going to die. Instead, she's just a ticking time bomb for the next generation, but I digress.While I was there, I saw things. I saw child after child after child waiting for their appointment. I saw the most sublime displays of children's art juxtaposed with hospital sterilization that I could ever possibly imagine. I saw and heard things that only occur in the nightmares of parents, and I was only in the waiting rooms.But I will never forget the 10-ish year old girl that came in for her regularly scheduled dialysis appointment ... as if it was just another Friday afternoon. She had her school books, a little snack, a book to read for pleasure, and a DVD, in case she finished her homework a little early. You know, everything you'd need for an afternoon hooked up to a huge medical machine that going to clean out all the toxins in your blood. As she entered the secured area, she warmly greeted all the doctors and nurses with the same familiarity that I would greet the staff of my favorite coffee shop as I stopped in for my morning cup of coffee.I don't know the status of that little girl. I don't know if she's healthy or, quite frankly, alive. I don't even know her name, as I only heard it in passing for the 37 seconds our paths crossed. However, I do remember being incredibly moved and touched by her upbeat attitude about the situations, and I hope that my efforts last two Octobers got her, in some way, a little comfort.And, if she is still with us, I hope we can get her a little more.=== PREVIOUS MESSAGE FOLLOWS ===Greetings (Again),If you are receiving this updated message, then you didn't feel generous the first time. Now, I tried to be nice the first time. I tried to send a simple, unobtrusive email message to get you into the spirit. Well, much like the bell ringers that I ignore in front of the Wal-Mart, you ignored me.I probably should have seen that coming...However, unlike those poor souls, I know how to contact you. And I can find out where you live. So, so, so, you better feel lucky that I'm too lazy to terrorize you people, but cause I could do it.Remember, it's not for me, it's for those poor kids... and the feral platypii.  Because, we can make more children, but platypii are hard to come by.=== ORIGINAL MESSAGE FOLLOWS ===It's that time of year again. The time when I beg you for money for charity. See, unlike those bell ringers outside Wal-Mart, I don't do it when you have ten bazillion holiday obligations...Once again, I will be enduring a 24-hour marathon of gaming to raise money for Children Hospital in Birmingham. All the money goes straight to them, and you get to tell Uncie Samuel that you're good for that money. I'd REALLY like to break $1000 this year, as I have come REALLY close for the past 2 year to doing so.This year, the event will take place on October 20th, beginning at 8 A.M. Once again, I will try to provide some web streams, etc, if you want to point and laugh (especially if I have to result to playing Dance Central at 4 AM to stay awake for the last part.)Look at it this way, I'm going to badger you about this for the next month. You might as well donate some money so you can righteously tell me to shut the Smurf up.You can place your bid at the link below. Feel free to spread the word to anyone and everyone.I thank you. The children thank you. Several breeds of feral platypus thank you. Maybe, just maybe, doing so will help you feel the love felt by re-fried beans when lovingly hugged in a warm tortilla.Enjoy your burrito.http://www.extra-life.org/participant/cgardner

  Read the article

• Yes, I did it - Skydiving in Mauritius

  Finally, I did it or better said we did it. Already back in November last year I saw the big billboard advertisement of Skydive Austral Mauritius near Caudan Waterfront in Port Louis and decided for myself that this is going to be the perfect birthday gift for my wife. Simply out of curiosity I would join her tandem jump with a second instructor. Due to her pregnancy of our son I had to be patient... But then finally, her birthday had arrived and on our midnight celebration session I showed her her netbook with the website preloaded. Actually, it was the "perfect" timing... Recovery from her cesarean is fine, local weather conditions are gorgious and the children were under surveillance of my mum - spending her annual holidays on the island. So, after late wake-up in the morning, we packed our stuff and off we went. According to Google Maps direction indication we had to drive for roughly 50km (only) but traffic here in Mauritius is always challenging. The dropzone is at the Zone Industrielle Mon Loisir Sugar Estate near Riviere du Rempart at the northern east coast. Anyways, we were not in a hurry and arrived there shortly after noon. The access road to the airfield are just small down-driven paths through sugar cane fields and according to our daughter "it's bumpy!". True true true... The facilities at Skydive Austral Mauritius are complete except for food. Enough space for parking, easy handling at the reception and a lot to see for the kids. There's even a big terrace with several sets of tables and chairs, small bar for soft drinks, strictly non-alcoholic. The team over there is all welcoming and warm-hearthy! Having the kids with us was no issue at all. Quite the opposite, our daugther was allowed to discover a lot of things than we adults did. Even visiting the small air plane was on the menu for her. Really great stuff! While waiting for our turn we enjoyed watching other people getting ready in the jump gear, taking off with the Cessna, and finally coming back down on the tandem parachute. Actually, the different expressions on their faces was one of the best parts while waiting. Great mental preparation as my wife was getting more anxious about her first jump... {loadposition content_adsense} First, we got some information about the procedures on the plane about how to get seated, tight up with our instructors and how to get ready for the jump off the plane as soon as we arrive the height of 10.000 ft. All well explained and easy to understand after all.Next, we met with our jumpers Chris and Lee aka "Rasta" to get dressed and ready for take-off. Those guys are really cool and relaxed for their job. From that point on, the DVD session / recording for my wife's birthday started and we really had a lot of fun... The difference between that small Cessna and a commercial flight with an Airbus or a Boeing is astronomic! The climb up to 10.000 ft took us roughly 25 minutes and we enjoyed the magnificent view over the turquoise lagunes near Poste de Flacq, Lafayette and Isle d'Ambre on the north-east coast. After flying through the clouds we sun-bathed and looked over "iced-sugar covered" Mauritius. You might have a look at the picture gallery of Skydive Mauritius for better imagination. The moment of truth, or better said, point of no return came after approximately 25 minutes. The door opens, moving into position on the side on top of the wheel and... out! Back flip and free fall! Slight turns and Wooooohooooo! through the clouds... It so amazing and breath-taking! So undescribable! You have to experience this yourself! Some seconds later the parachute opened and we glided smoothly with some turns and spins back down to the dropzone. The rest of the family could hear and see us soon and the landing was easy going. We never had any doubts or fear about our instructors. They did a great job and we are looking forward to book our next job. I might even consider to follow educational classes on skydiving and earn a license. By the way, feel free to get in touch with Skydive Austral Mauritius. Either via contact details on their website or tweeting a little bit with them. Follow the tweets of Chris and fellows on SkydiveAustral.

  Read the article

• Soft lockup after upgrade - cannot install from live CD

  - by nbm

  I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

  Read the article

• How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

  - by Ibuntu

  I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

  Read the article

• JPA 2.1 Schema Generation (TOTD #187)

  - by arungupta

  This blog explained some of the key features of JPA 2.1 earlier. Since then Schema Generation has been added to JPA 2.1. This Tip Of The Day (TOTD) will provide more details about this new feature in JPA 2.1. Schema Generation refers to generation of database artifacts like tables, indexes, and constraints in a database schema. It may or may not involve generation of a proper database schema depending upon the credentials and authorization of the user. This helps in prototyping of your application where the required artifacts are generated either prior to application deployment or as part of EntityManagerFactory creation. This is also useful in environments that require provisioning database on demand, e.g. in a cloud. This feature will allow your JPA domain object model to be directly generated in a database. The generated schema may need to be tuned for actual production environment. This usecase is supported by allowing the schema generation to occur into DDL scripts which can then be further tuned by a DBA. The following set of properties in persistence.xml or specified during EntityManagerFactory creation controls the behaviour of schema generation. Property Name Purpose Values javax.persistence.schema-generation-action Controls action to be taken by persistence provider "none", "create", "drop-and-create", "drop" javax.persistence.schema-generation-target Controls whehter schema to be created in database, whether DDL scripts are to be created, or both "database", "scripts", "database-and-scripts" javax.persistence.ddl-create-script-target, javax.persistence.ddl-drop-script-target Controls target locations for writing of scripts. Writers are pre-configured for the persistence provider. Need to be specified only if scripts are to be generated. java.io.Writer (e.g. MyWriter.class) or URL strings javax.persistence.ddl-create-script-source, javax.persistence.ddl-drop-script-source Specifies locations from which DDL scripts are to be read. Readers are pre-configured for the persistence provider. java.io.Reader (e.g. MyReader.class) or URL strings javax.persistence.sql-load-script-source Specifies location of SQL bulk load script. java.io.Reader (e.g. MyReader.class) or URL string javax.persistence.schema-generation-connection JDBC connection to be used for schema generation javax.persistence.database-product-name, javax.persistence.database-major-version, javax.persistence.database-minor-version Needed if scripts are to be generated and no connection to target database. Values are those obtained from JDBC DatabaseMetaData. javax.persistence.create-database-schemas Whether Persistence Provider need to create schema in addition to creating database objects such as tables, sequences, constraints, etc. "true", "false" Section 11.2 in the JPA 2.1 specification defines the annotations used for schema generation process. For example, @Table, @Column, @CollectionTable, @JoinTable, @JoinColumn, are used to define the generated schema. Several layers of defaulting may be involved. For example, the table name is defaulted from entity name and entity name (which can be specified explicitly as well) is defaulted from the class name. However annotations may be used to override or customize the values. The following entity class: @Entity public class Employee {    @Id private int id;    private String name;     . . .     @ManyToOne     private Department dept; } is generated in the database with the following attributes: Maps to EMPLOYEE table in default schema "id" field is mapped to ID column as primary key "name" is mapped to NAME column with a default VARCHAR(255). The length of this field can be easily tuned using @Column. @ManyToOne is mapped to DEPT_ID foreign key column. Can be customized using JOIN_COLUMN. In addition to these properties, couple of new annotations are added to JPA 2.1: @Index - An index for the primary key is generated by default in a database. This new annotation will allow to define additional indexes, over a single or multiple columns, for a better performance. This is specified as part of @Table, @SecondaryTable, @CollectionTable, @JoinTable, and @TableGenerator. For example: @Table(indexes = {@Index(columnList="NAME"), @Index(columnList="DEPT_ID DESC")})@Entity public class Employee {    . . .} The generated table will have a default index on the primary key. In addition, two new indexes are defined on the NAME column (default ascending) and the foreign key that maps to the department in descending order. @ForeignKey - It is used to define foreign key constraint or to otherwise override or disable the persistence provider's default foreign key definition. Can be specified as part of JoinColumn(s), MapKeyJoinColumn(s), PrimaryKeyJoinColumn(s). For example: @Entity public class Employee {    @Id private int id;    private String name;    @ManyToOne    @JoinColumn(foreignKey=@ForeignKey(foreignKeyDefinition="FOREIGN KEY (MANAGER_ID) REFERENCES MANAGER"))    private Manager manager;     . . . } In this entity, the employee's manager is mapped by MANAGER_ID column in the MANAGER table. The value of foreignKeyDefinition would be a database specific string. A complete replay of Linda's talk at JavaOne 2012 can be seen here (click on CON4212_mp4_4212_001 in Media). These features will be available in GlassFish 4 promoted builds in the near future. JPA 2.1 will be delivered as part of Java EE 7. The different components in the Java EE 7 platform are tracked here. JPA 2.1 Expert Group has released Early Draft 2 of the specification. Section 9.4 and 11.2 provide all details about Schema Generation. The latest javadocs can be obtained from here. And the JPA EG would appreciate feedback.

  Read the article

• ???Flashback Log???????Redo Log?

  - by Liu Maclean(???)

  ????????????????????redo log?   RVWR( Recovery Writer)?3s??flashback generate buffer??block before image?????????? ?????block change???RVWR??block before image ?flashback log? ?????????,Oracle???????????before image????????,????????flashback database logs?????   ???????????,????? ??????????????????,???????????before image?????shared pool??flashback log buffer?,RVWR??????flashback log buffer??????????? ?DBWR???????????????,DBWR?????buffer header??FBA(Flashback Byte Address)?flashback log buffer?????????? ???? ?????? ??? ????????????? , RVWR???????????(flashback markers)?flashback database logs?? ????(flashback markers)?????????????Oracle??flashback ??????????  ??????????, Oracle ??????(flashback markers)????????????flashback database log???????????block image; ??Oracle ???????(forward recovery)?????????????????SCN?????? flashback markers for example: **** Record at fba: (lno 1 thr 1 seq 1 bno 4 bof 8184) **** RECORD HEADER: Type: 3 (Skip) Size: 8132 RECORD DATA (Skip): **** Record at fba: (lno 1 thr 1 seq 1 bno 4 bof 52) **** RECORD HEADER: Type: 7 (Begin Crash Recovery Record) Size: 36 RECORD DATA (Begin Crash Recovery Record): Previous logical record fba: (lno 1 thr 1 seq 1 bno 3 bof 316) Record scn: 0x0000.00000000 [0.0] **** Record at fba: (lno 1 thr 1 seq 1 bno 3 bof 8184) **** RECORD HEADER: Type: 3 (Skip) Size: 7868 RECORD DATA (Skip): **** Record at fba: (lno 1 thr 1 seq 1 bno 3 bof 316) **** RECORD HEADER: Type: 2 (Marker) Size: 300 RECORD DATA (Marker): Previous logical record fba: (lno 0 thr 0 seq 0 bno 0 bof 0) Record scn: 0x0000.00000000 [0.0] Marker scn: 0x0000.0060e024 [0.6348836] 06/13/2012 15:56:35 Flag 0x0 Flashback threads: 1, Enabled redo threads 1 Recovery Start Checkpoint: scn: 0x0000.0060e024 [0.6348836] 06/13/2012 15:56:12 thread:1 rba:(0x80.180.10) Flashback thread Markers: Thread:1 status:0 fba: (lno 1 thr 1 seq 1 bno 2 bof 8184) Redo Thread Checkpoint Info: Thread:1 rba:(0x80.180.10) **** Record at fba: (lno 1 thr 1 seq 1 bno 2 bof 8184) **** RECORD HEADER: Type: 3 (Skip) Size: 8168 RECORD DATA (Skip): End-Of-Thread reached ????????????????block change ????before image????????flashback log?? ?????block change???flashback log record ????????? redo log???!????flashback log ???????before image ? redo log??? change vector ?  Oracle?????????????????????????????????????,??????I/O??????????????: ??hot block??,Oracle???????????block image?????; Oracle ?????????(flashback barriers)???????????????,flashback barriers???????(???15??),??????????(flashback barriers)????(flashback markers)????????? ????, ??????change?????, ???????????????????????????, ?15????????????????????flashback log????????before image?????????????,?????????????????????,?????????????? ????????,??????????????(flashback barriers), flashback barriers???????,?????15????? ?????flashback barriers????????(flashback markers)???????????????,???????????????????(????barriers?????)??????block image ,????????????????????????????????? ??????????flashback log????redo log????! ????,????????????????, ?????????? SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create table flash_maclean (t1 varchar2(200)) tablespace users; Table created. SQL> insert into flash_maclean values('MACLEAN LOVE HANNA'); 1 row created. SQL> commit; Commit complete. SQL> startup force; ORACLE instance started. Total System Global Area 939495424 bytes Fixed Size 2233960 bytes Variable Size 713034136 bytes Database Buffers 218103808 bytes Redo Buffers 6123520 bytes Database mounted. Database opened. SQL> update flash_maclean set t1='HANNA LOVE MACLEAN'; 1 row updated. commit; Commit complete. SQL> alter system checkpoint; System altered. SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from flash_maclean; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------ 140431 4 datafile 4 block 140431 ??RDBA rdba: 0x0102248f (4/140431) SQL> ! ps -ef|grep rvwr|grep -v grep oracle 26695 1 0 15:56 ? 00:00:00 ora_rvwr_G11R23 SQL> oradebug setospid 26695 Oracle pid: 20, Unix process pid: 26695, image: [email protected] (RVWR) SQL> ORADEBUG DUMP FBTAIL 1; Statement processed. To dump the last 2000 flashback records , ??ORADEBUG DUMP FBTAIL 1????????2000?????? SQL> oradebug tracefile_name /s01/orabase/diag/rdbms/g11r23/G11R23/trace/G11R23_rvwr_26695.trc ? TRACE?????????block? before image **** Record at fba: (lno 1 thr 1 seq 1 bno 55 bof 2564) **** RECORD HEADER: Type: 1 (Block Image) Size: 28 RECORD DATA (Block Image): file#: 4 rdba: 0x0102248f Next scn: 0x0000.00000000 [0.0] Flag: 0x0 Block Size: 8192 BLOCK IMAGE: buffer rdba: 0x0102248f scn: 0x0000.00609044 seq: 0x01 flg: 0x06 tail: 0x90440601 frmt: 0x02 chkval: 0xc626 type: 0x06=trans data Hex dump of block: st=0, typ_found=1 Dump of memory from 0x00002B1D94183C00 to 0x00002B1D94185C00 2B1D94183C00 0000A206 0102248F 00609044 06010000 [.....$..D.`.....] 2B1D94183C10 0000C626 00000001 00014AD4 0060903A [&........J..:.`.] 2B1D94183C20 00000000 00320002 01022488 00090006 [......2..$......] 2B1D94183C30 00000CC8 00C00340 000D0542 00008000 [[email protected].......] 2B1D94183C40 006040BC 000F000A 00000920 00C002E4 [.@`..... .......] 2B1D94183C50 0017048F 00002001 00609044 00000000 [..... ..D.`.....] 2B1D94183C60 00000000 00010100 0014FFFF 1F6E1F77 [............w.n.] 2B1D94183C70 00001F6E 1F770001 00000000 00000000 [n.....w.........] 2B1D94183C80 00000000 00000000 00000000 00000000 [................] Repeat 500 times 2B1D94185BD0 00000000 00000000 2C000000 4D120102 [...........,...M] 2B1D94185BE0 454C4341 4C204E41 2045564F 4E4E4148 [ACLEAN LOVE HANN] 2B1D94185BF0 01002C41 43414D07 4E41454C 90440601 [A,...MACLEAN..D.] Block header dump: 0x0102248f Object id on Block? Y seg/obj: 0x14ad4 csc: 0x00.60903a itc: 2 flg: E typ: 1 - DATA brn: 0 bdba: 0x1022488 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0x0006.009.00000cc8 0x00c00340.0542.0d C--- 0 scn 0x0000.006040bc 0x02 0x000a.00f.00000920 0x00c002e4.048f.17 --U- 1 fsc 0x0000.00609044 bdba: 0x0102248f data_block_dump,data header at 0x2b1d94183c64 =============== tsiz: 0x1f98 hsiz: 0x14 pbl: 0x2b1d94183c64 76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f77 avsp=0x1f6e tosp=0x1f6e 0xe:pti[0] nrow=1 offs=0 0x12:pri[0] offs=0x1f77 block_row_dump: tab 0, row 0, @0x1f77 tl: 22 fb: --H-FL-- lb: 0x2 cc: 1 col 0: [18] 4d 41 43 4c 45 41 4e 20 4c 4f 56 45 20 48 41 4e 4e 41 end_of_block_dump SQL> select dump('MACLEAN LOVE HANNA',16) from dual; DUMP('MACLEANLOVEHANNA',16) -------------------------------------------------------------------- Typ=96 Len=18: 4d,41,43,4c,45,41,4e,20,4c,4f,56,45,20,48,41,4e,4e,41 ???????????????????????,??flashback log??before image????????? create table flash_maclean1 (t1 int) tablespace users; SQL> select vs.name, ms.value 2 from v$mystat ms, v$sysstat vs 3 where vs.statistic# = ms.statistic# 4 and vs.name in ('redo size','db block changes'); NAME VALUE ---------------------------------------------------------------- ---------- db block changes 0 redo size 0 SQL> select name,value from v$sysstat where name like 'flashback log%'; NAME VALUE ---------------------------------------------------------------- ---------- flashback log writes 49 flashback log write bytes 9306112 SQL> begin 2 for i in 1..5000 loop 3 update flash_maclean1 set t1=t1+1; 4 commit; 5 end loop; 6 end; 7 / PL/SQL procedure successfully completed. SQL> select vs.name, ms.value 2 from v$mystat ms, v$sysstat vs 3 where vs.statistic# = ms.statistic# 4 and vs.name in ('redo size','db block changes'); NAME VALUE ---------------------------------------------------------------- ---------- db block changes 20006 redo size 3071288 SQL> select name,value from v$sysstat where name like 'flashback log%'; NAME VALUE ---------------------------------------------------------------- ---------- flashback log writes 52 flashback log write bytes 10338304 ??????????? ??hot block,???20006 ?block changes???? ??? 3000k ?redo log ? ??1000k? flashback log ?

  Read the article

• iPhone reachability checking

  - by Sneakyness

  I've found several examples of code to do what I want (check for reachability), but none of it seems to be exact enough to be of use to me. I can't figure out why this doesn't want to play nice. I have the reachability.h/m in my project, I'm doing #import <SystemConfiguration/SystemConfiguration.h> And I have the framework added. I also have: #import "Reachability.h" at the top of the .m in which I'm trying to use the reachability. Reachability* reachability = [Reachability sharedReachability]; [reachability setHostName:@"http://www.google.com"]; // set your host name here NetworkStatus remoteHostStatus = [reachability remoteHostStatus]; if(remoteHostStatus == NotReachable) {NSLog(@"no");} else if (remoteHostStatus == ReachableViaWiFiNetwork) {NSLog(@"wifi"); } else if (remoteHostStatus == ReachableViaCarrierDataNetwork) {NSLog(@"cell"); } This is giving me all sorts of problems. What am I doing wrong? I'm an alright coder, I just have a hard time when it comes time to figure out what needs to be put where to enable what I want to do, regardless if I want to know what I want to do or not. (So frustrating) Update: This is what's going on. This is in my viewcontroller, which I have the #import <SystemConfiguration/SystemConfiguration.h> and #import "Reachability.h" set up with. This is my least favorite part of programming by far. FWIW, we never ended up implementing this in our code. The two features that required internet access (entering the sweepstakes, and buying the dvd), were not main features. Nothing else required internet access. Instead of adding more code, we just set the background of both internet views to a notice telling the users they must be connected to the internet to use this feature. It was in theme with the rest of the application's interface, and was done well/tastefully. They said nothing about it during the approval process, however we did get a personal phone call to verify that we were giving away items that actually pertained to the movie. According to their usually vague agreement, you aren't allowed to have sweepstakes otherwise. I would also think this adheres more strictly to their "only use things if you absolutely need them" ideaology as well. Here's the iTunes link to the application, EvoScanner.

  Read the article

• Audio/video streaming on Windows platform

  - by bushtucker

  I'm building an interactive language learning application to be used in a classroom environment. The idea is that a teacher should be able to talk to the students (=audio stream to all students), let students talk to each other (= audio P2P) in groups of two or more, let students watch a video coming from a the DVD player or coming from a media server. It should be possible to save the audio/video streams. The teacher should also be able to monitor, take-over or block the desktop of the students. The platform is Windows and it's a desktop application, no web application. The audio delay should be as minimal as poosible. Optionally a student sitting at home should be supported, but it's not a high priority. I am now finished with the classroom control part of the application (login, monitor, block, ...) and want to start the audio and video part. I've been evaluating several options like DirectX, GStreamer and SIP but now I have to make a decision. DirectX seems an obvious choice for the Windows platform, but it only lets me capture and playback audio and video. The encoding/decoding/network part I should do myself. GStreamer contains all kinds of options to capture/encode/stream/save audio and video streams. I've experimented a bit with it (ossbuild) and it does seem to involve a lot of trial and error to make something work: - microphone capture (via directsoundsrc) produces cracking noises on some computers - rtpL16 payloader didn't work well - streaming raw audio over the network only working at a sampling rate of 8000, no higher - there are a lot of errors when receiving mpeg4 video (bad I-frame), on some computers worse than others It is my impression that gstreamer is primary targetted at linux platforms. Development and support for the Windows platform seems to be a little behind. Nevertheless it's a powerful framework that could save me months and years of work. SIP seems to be able to do everything I want, but it is targeted towards telephony and IM. I don't know how flexible SIP is. It seems to me that the SIP layer would just be overhead as I already have a central (teacher) application that can control and setup all the streams. The interesting parts of frameworks like opalvoip and freeswitch are the actual audio/video capture, the encoding and transmission. Does anyone know how these interesting parts relate a framework like gstreamer? Are they easy to integrate into a custom application? Are they flexible enough? Does anyone have experience with all or one of these technologies? Maybe there are even other options I can look at? Many thanks for your advice

  Read the article

• WDS 2008 R2 DHCP Error

  - by scampbell

  Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment' when booting from a standard WDS boot.wim image taken from a Windows 7 DVD. I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM. When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP? DHCP server is not on the WDS box but is in the same subnet. As per some fixes I have read I enabled RSTP on my switches but that didnt help. I have included the end of setupact.log to see if any of you have any ideas. Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG. I dont suppose theres any way of increasing the timeout? Thanks. 2011-04-11 17:26:31, Info [0x0b0022] WDS StartNetworking: Trying to start networking. 2011-04-11 17:26:31, Info WDS Network service dhcp not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service lmhosts not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service lanmanworkstation not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service bfe not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service ikeext not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service mpssvc not running or could not be queried: 264e18 1 1 2011-04-11 17:27:24, Info WDS Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded 2011-04-11 17:27:25, Info WDS No computer name specified, generating a random name. 2011-04-11 17:27:25, Info WDS Renaming computer to MININT-VN2P876. 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Service winmgmt disable: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt stop: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt enable: 0x00000000 2011-04-11 17:27:25, Info WDS Released profiling mutex 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Install MS_MSCLIENT: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_NETBIOS: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_SMB: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_TCPIP6: 0x0004a020 2011-04-11 17:27:26, Info WDS Install MS_TCPIP: 0x0004a020 2011-04-11 17:27:26, Info WDS Service dhcp start: 0x00000000 2011-04-11 17:27:26, Info WDS Service lmhosts start: 0x00000000 2011-04-11 17:27:26, Info WDS Service ikeext start: 0x00000000 2011-04-11 17:27:26, Info WDS Service mpssvc start: 0x00000000 2011-04-11 17:27:26, Info WDS Released profiling mutex 2011-04-11 17:27:26, Info WDS Spent 967ms installing network components 2011-04-11 17:27:28, Info WDS Spent 2247ms installing network drivers 2011-04-11 17:27:38, Info WDS QueryAdapterStatus: no operational adapters found. 2011-04-11 17:27:38, Info WDS Spent 10140ms confirming network initialization; status 0x80004005 2011-04-11 17:27:38, Info WDS WaitForNetworkToInitialize failed; ignoring error 2011-04-11 17:27:38, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set: 2011-04-11 17:27:38, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb] 2011-04-11 17:27:38, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]

  Read the article

• Why do GPUs overheat?

  - by JAD

  About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

  Read the article

• Performing mechanical movements using computer

  - by Vi

  How to make a computer (in particular, my laptop) to perform some mechanical movements without buying anything $5, soldering things inside computer or creating big sophisticated circuits? Traditionally CD-ROM tray is used to make computer do some movement IRL by, for example, SSH command, but in laptop tray is one-shot (unless manually reloaded) and also not very comfortable [mis]usage. Some assistance circuits can be in use too, but not complex. For example, there is a little motor that can work on USB power. Devices in my computer: DVD-ROM tray: one-time push. USB power: continuous power to the motor or LEDS or relay that turns on something powerful. Audio card. 3 outputs (modprobe alsa model=test can set Mic and Line-in as additional output). One controllable DC output (microphone) that can power up LED and some electronic (may be even mechanic?) relay. Also with sophisticated additional circuiting can control a lot of devices with a good precision. Both input and output support. Probably the most useful object in computer for radio ham. Modem. Don't know about this much, it doesn't work because of hsfmodem crashes kernel if memory is = 1GB. May be it's "pick up" and "hang up" can turn on and off power taken from USB port? Video card. VGA port? S-Video port? Will them be useful? Backlight. Tunable, but probably unuseful. CardBus (or some) slot. Nothing interesting for the task probably (is it?). AC adapter and battery. Probably nothing programmable here. /* My AC adapter already have additional jacks to connect extra devics */ Keyboard. No use. Touchpad. Good sensor (synclient -m 1), but no output. Various LEDs inside laptop. Probably too weak and requires soldering. Fans inside laptop. Poor control over them, requires soldering and dangerous to tinker. HDD (internal and external) that can be spin down and up (hdparm -Y, cat /dev/ubb). But connecting anything serially with it's power line makes HDD underpowered... And too complex. Is something are missed? Any ideas how to use described components? Any other ideas? May be there are easily available /* in developing countries */ cheap devices like "enhanced multimeters" that are controllable from computer and can provide configurable output and measure current and other things? Things to aid pushing many physical buttons with computer. Isn't this a simple idea and implementation and a lot of use in good hands?

  Read the article

• Set up lnux box for hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project The above upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Create a chroot jail to hold sftp user via rssh. This will force SCP/SFTP and will circumvent traditional FTP server setup. #cd /tmp #wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm #rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm #useradd -m -d /home/dev -s /usr/bin/rssh dev #passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. #vi /etc/rssh.conf Uncomment line allowscp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). Above instructions for SFTP appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

  Read the article

• Computer makes hissing noise, turns off after few seconds

  - by Kaustubh P

  I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

  Read the article

• IP Micro-outages, telephone micro-outages, and CATV micro-outages

  - by Michael Graff

  This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

  Read the article

• Application Does Not Start in Windows 7

  - by Jim Fell

  I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fresh from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried running sfc /scannow from the command line (with administrator privileges), shutting down the Spybot Resident, and disabling the firewall and virus scanner. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Faulting application name: SSDFresh.exe, version: 1.0.0.0, time stamp: 0x4f2a45d8 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x000007ff0016dbba Faulting process id: 0x994 Faulting application start time: 0x01cd11fd9fe978df Faulting application path: C:\Program Files (x86)\SSD Fresh\SSDFresh.exe Faulting module path: unknown Report Id: dfeed551-7df0-11e1-a2c7-002522c47ec0 Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Application: SSDFresh.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.NullReferenceException Stack: at AbBugReporter.BugForm.InitLanguage() at AbBugReporter.BugForm..ctor(AbFlexTrans.LanguageInfo, AbBugReporter.BugReportManager, Boolean) at AbBugReporter.BugReportManager.Show(System.Exception) at SSDFresh.App.App_DispatcherUnhandledException(System.Object, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs) at System.Windows.Threading.Dispatcher.CatchException(System.Exception) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.WrappedInvoke(System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Application.RunInternal(System.Windows.Window) at System.Windows.Application.Run() at SSDFresh.App.Main() Error 4/2/2012 11:35:39 PM SideBySide 59 None Activation context generation failed for "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe".Error in manifest or policy file "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe.Config" on line 0. Invalid Xml syntax. Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

  Read the article

• Intermittent lockups, unable to diagnose in over a year

  - by Magsol

  Here's a real doosie; I may just give my firstborn child to whomever helps me solve this problem. In July 2008, I assembled what would be my desktop computer for graduate school. Here are the specs of the machine I built: Thermaltake 750W PSU Corsair Dominator 2x2GB 240-pin SDRAM Thermaltake Tower Asus P5K Deluxe Motherboard Intel Core 2 Quad Q9300 2.5GHz CPU 2 x GeForce 8600 GT WD Caviar Blue 640GB hard drive CD burner DVD burner Soon thereafter, I ordered a new motherboard (because I was an idiot; that first motherboard supported CrossFire, not SLI), an Asus P5N-D. I was originally running Windows XP SP3. Pretty much right into the start of the fall semester, my desktop would simply lock up after awhile. If my system was largely idling, it would be after 1-3 days. If was gaming, it often happened an hour or two into my gaming session, indicating a link to activity level. Here's where it started getting interesting. I started looking at the system temps. The CPU was warmer than it should have been (~60s C), so I purchased some more efficient cooling compound a way better cooler for it. Now it hardly goes over 40 C. Intel was even kind enough to swap it out for free, just to rule it out. Lockups continued. The graphics cards were also running pretty warm: about 60 C idling. Removing one of them seemed to improve stability a little bit...as in, it wouldn't lock up quite as frequently, but still always eventually locked up. But it didn't matter which card I used or removed, the lockups continued. I reverted back to the original motherboard, the P5K Deluxe. Lockups continued. I purchased an entirely new motherboard, eVGA's nForce 750i. Lockups continued. Ran memtest86+ over and over and over, with no errors. Even RMA'd the memory. Lockups continued. Replaced the PSU with a Corsair 750W PSU. Lockups continued. Tried disconnecting all IDE drives (HDDs are SATA). Lockups continued. Replaced both graphics cards with a single Radeon HD 4980. Average temps are now always around 50 C when idling, 60 C only when gaming. Lockups continued. Throughout the whole ordeal, the system has been upgraded from Windows XP SP3 to Vista 32-bit, to Vista 64-bit, and is now at Windows 7 64-bit. Lockups have occurred at every step along the way (each OS was in place for at least a few months before the next upgrade). Edit: By "upgrade" I mean clean install each time. In addition to those reformats, I have performed many, many other reformats of the system and a reinstall of whatever OS had been previously installed in an attempt to rectify this problem, to no avail./Edit When the system locks up, there's no blue screen, no reboot, no error message of any kind. It simply freezes in place until I hit the reset button. Very, very rarely, once Windows boots back up, the system informs me that Windows has recovered from an error, but it can never find the source aside from some piece of hardware. I've swapped out every component in this computer, and there are more fans in it than I care to count...though for the sake of completeness: top 80mm case fan (out) rear 80mm case fan (out) rear 120mm case fan (out) front 120mm case fan (in) side 250mm case fan (in) giant CPU fan on-board motherboard fan (the eVGA board) triple-fan memory setup (came with the memory) PSU internal fan another 120mm fan I stuck on the underside of the video card to keep hot air from collecting at the bottom of the case I'm truly out of ideas. ANY help at all would be oh-so-very GREATLY appreciated. Thank you!

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >