Search Results

Search found 6514 results on 261 pages for 'mini filter'.

Page 109/261 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Can't install Ubuntu 13.04

    - by Beaker1210
    I am trying to install Ubuntu 13.04 on a Dell Mini 10 that is currently running Qimo. I want to replace the old operating system entirely. When I turn on the computer and boot from the USB stick it brings up a black screen that says: Boot: I have no idea where to go from here. I created the bootable USB stick using Universal USB installer. I've used the same process for installing Ubuntu on other machines in the past have never had this issue. Thanks in advance for the help. :)

    Read the article

  • Dell L501X Display Port Screen issue

    - by jdflorezPA
    I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

    Read the article

  • Ubuntu 12.04 on MBPro, Early 2011, options

    - by sthysel
    I have a 2.2 GHz i7, 4GB MacBook Pro 8.3, AMD Radeon HD 6750M 1024 MB, Early 2011. As far as I see I have two options, running Ubuntu on this hardware: VMWare/Virtualbox and Ubuntu in a VM, I already ordered a 16G RAM upgrade for this. Wipe OSX and go Ubuntu native, with 16G RAM, yay ! I'm kinda leaning towards option 2 as I tend to spend 90% of my time in dev VM's at work anyway. All my other machines at home, and most at work are Ubuntu/Linux as well. I have a Mac mini on standby for the odd Itunes backup/sync. If I don't have to keep OSX around, I would like to get rid of it altogether. Ubuntu support on Mac hardware seems to be a hit and miss affair as far as I can tell. Does anyone have good success running a recent version of Ubuntu on this hardware ? Thanks

    Read the article

  • Ubuntu not picking up wireless networks [Ubuntu 12.10]

    - by user114772
    i am new to Ubuntu & just installed it on my DELL mini laptop, when i open the network tab it does not show the wireless networks around me, neither does it show mine, i have enabled networking but it still does not pick up any wireless. I am pretty sure my wireless network is not hidden, since i can connect to it on my other laptop, anyone have any idead on what i could be? It worked once when i was running Ubuntu on my USB, but when i installed it to the hard drive as a main OS it did not list any wireless networks.

    Read the article

  • Nvidia GTS 450 HDMI problem?

    - by Gercke
    Good afternoon friends. I have a problem with my video card, I have a video card GeForce GTS 450 and a TV Samsung Series 4 43 "and I have it connected to my video card via a cable Mini HDMI to the TV and everything works perfectly, I can instarlar Ubuntu 12.04 (64bits) perfectly, but the problem when I want to change the screen resolution but try to change the driver I install that comes directly from the Nvidia page gave me an error at the end. maximum resolution I presents is 1024x 768 and is supposed to introduce more resolutions and that is connected to the HDMI. A someone else has happened???? Will have some sort of solution???? I hope someone can help me and I thank you very much. Regards

    Read the article

  • Erratic display behaviour on 12.04 using an Asus Zenbook

    - by Azarias R
    When I first plugged in my 23 inch monitor through the mini-VGA port, everything worked...both display were detected, and worked. On the second or third plug in, the internal display would turn off, and only the external display would work. When I try to 'detect monitor', I got "could not set the configuration for crtc 63" a few times. Now, when I plug in the external display, I get a screen full of orange color on the external display, and the laptop display turns off. The only way to get things back is to force turn off the laptop and restart. Unplugging/replugging monitor doesn't work, and seems like ubuntu crashes. Can anyone help?

    Read the article

  • Samsung officialise son nouveau Galaxy S4 LTE-A, avec des transferts atteignant les 102 Mbps, il bat les records de vitesse de téléchargement

    Samsung officialise son nouveau Galaxy S4 LTE-A, avec des transferts atteignant les 102 Mbps, il bat les records de vitesse de téléchargementAprès le Galaxy S4 mini, le S4 Zoom, et le S4 Active le coréen présente un nouveau venu dans la famille Galaxy S4 : le Galaxy S4 LTE-A.Bien que Samsung n'ait pas modifié son apparence, les caractéristiques techniques sont des plus impressionnantes. L'appareil embarque un processeur Snapdragon 800 de Qualcomm quad-core cadencé à 2.3 Ghz ce qui en fait un smartphone incroyablement rapide, le plus rapide du monde d'ailleurs d'après les benchmarks. Le téléphone possède un écran Super AMOLED de 4,99 pouces en résolution Full-HD (1080 x 1920 pixels), 2 Go de RAM, un capteur...

    Read the article

  • Xbox Surface : bientôt une tablette 7 pouces dédiée au jeu ? Microsoft plancherait sur le sujet

    Xbox Surface : bientôt une tablette 7 pouces dédiée au jeu ? Microsoft plancherait sur le sujet Après Apple avec l'iPad Mini, ce serait au tour de Microsoft de se lancer dans la conception d'une tablette de petite taille (7 pouces). À la différence d'autres dispositifs du même type, la tablette de Microsoft sera spécialement optimisée pour le jeu. Selon un article du magazine The Verge des sources proches de Microsoft, le développement du projet aurait même déjà bien évolué. La tablette xBox Surface reposera sur une architecture ARM spécifique avec une bande passante mémoire importante, afin de pouvoir répondre aux besoins d'un GPU plus puissant que celui disponible ...

    Read the article

  • Invalid configuration `noarch-redhat-linux-gnu': machine `noarch-redhat' not recognized

    - by Spacedust
    When I try to build rpm from src rpm (Apache 2.4.1) I got this error: rpmbuild -tb httpd-2.4.1.tar.bz2 --ba httpd.spec + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --target=noarch-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-layout=RPM --libdir=/usr/lib64 --sysconfdir=/etc/httpd/conf --includedir=/usr/include/httpd --libexecdir=/usr/lib64/httpd/modules --datadir=/var/www --with-installbuilddir=/usr/lib64/httpd/build --enable-mpms-shared=all --with-apr=/usr --with-apr-util=/usr --enable-suexec --with-suexec --with-suexec-caller=apache --with-suexec-docroot=/var/www --with-suexec-logfile=/var/log/httpd/suexec.log --with-suexec-bin=/usr/sbin/suexec --with-suexec-uidmin=500 --with-suexec-gidmin=100 --enable-pie --with-pcre --enable-mods-shared=all --enable-ssl --with-ssl --enable-socache-dc --enable-bucketeer --enable-case-filter --enable-case-filter-in --disable-imagemap checking for chosen layout... RPM checking for working mkdir -p... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking build system type... x86_64-redhat-linux-gnu checking host system type... x86_64-redhat-linux-gnu checking target system type... Invalid configuration `noarch-redhat-linux-gnu': machine `noarch-redhat' not recognized configure: error: /bin/sh build/config.sub noarch-redhat-linux-gnu failed blad: Bledny stan wyjscia z /var/tmp/rpm-tmp.48153 (%build) Bledy budowania RPM-a: Bledny stan wyjscia z /var/tmp/rpm-tmp.48153 (%build)

    Read the article

  • Unable to execute gs program: No such file or directory

    - by Imran
    I've setup CUPS + Avahi on my NAS box in order to enable AirPrint with my existing network printer. Printing a test page via CUPS and printing us lp works fine, and I am able to see my printer on the printer list on my iOS device. However when sending a print job from my iOS device the printer status is set to paused and doesnt print anything. When checking the error_logs I have found this line which I believe is causing the error. D [04/Sep/2012:03:20:25 +0100] [Job 11] Started filter gs (PID 7485) D [04/Sep/2012:03:20:25 +0100] [Job 11] Started filter pstops (PID 7486) D [04/Sep/2012:03:20:25 +0100] [Job 11] Set job-printer-state-message to "Unable to execute gs program: No such file or directory", current level=ERROR D [04/Sep/2012:03:20:25 +0100] [Job 11] PID 7485 (gs) stopped with status 1! D [04/Sep/2012:03:20:25 +0100] [Job 11] PID 7486 (pstops) stopped with status 1! D [04/Sep/2012:03:20:25 +0100] [Job 11] Backend returned status 1 (failed) D [04/Sep/2012:03:20:25 +0100] [Job 11] Printer stopped due to backend errors; please consult the error_log file for details. I have installed Ghostscript, so I'm not quite sure why its saying its unable to execute the program, unless there are configurations for GS that I havent set yet. Any ideas?

    Read the article

  • Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

    - by NickToyota
    Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

    Read the article

  • postfix Mail filters not running behind a controlled enviornment

    - by Ashish
    Hi, I have deployed a postfix server for email receiving. On this I have configured SenderID + SPF milter, by referring to http://www.postfix.org/MILTER_README.html The command that I used is as follows: ./sid-filter -u postfix -p inet:10027@localhost -l Following are my settings in main.cf file: #Milter support for smtpd mail smtpd_milters = inet:localhost:10027, inet:localhost:10028 # Milters for non-SMTP mail. non_smtpd_milters = inet:localhost:10027, inet:localhost:10028 milter_default_action = reject # Postfix . 2.6 #milter_protocol = 6 # 2.3 . Postfix . 2.5 milter_protocol = 2 Now I have this observation: One of the postfix that is setup on AWS CentOS 5.5 is working fine and is able to receive mails on defined mx record. One of the similar postfix(as in step 1) that is setup behind one of the corporate firewalls is not able to receive any mails and is giving following type of error logs: connect from xxxxxx.austin.hp.com[xx.xxx.96.198] May 25 13:20:02 g2t0385g postfix/smtpd[11733]: C11F9B0194: client=xxxxxxx.austin.hp.com[15.217.96.198] May 25 13:20:03 g2t0385g postfix/cleanup[11814]: C11F9B0194: message-id= May 25 13:20:03 g2t0385g postfix/cleanup[11814]: C11F9B0194: milter-reject: END-OF-MESSAGE from xxxxxx.austin.hp.com[xx.xxx.96.198]: 5.7.1 Command rejected; from= to= proto=ESMTP helo= Here the 'sid-filter' is giving problems. Any idea, what I am doing wrong? Please help. Thanks in advance Ashish Sharma

    Read the article

  • Limiting bandwidth on internal interface on Linux gateway

    - by Jack Scott
    I am responsible for a Linux-based (it runs Debian) branch office router that takes a single high-speed Internet connection (eth2) and turns it into about 20 internal networks, each with a seperate subnet (192.168.1.0/24 to 192.168.20.0/24) and a seperate VLAN (eth0.101 to eth0.120). I am trying to restrict bandwidth on one of the internal subnets that is consistently chewing up more bandwidth than it should. What is the best way to do this? My first try at this was with wondershaper, which I heard about on SuperUser here. Unfortunately, this is useful for exactly the opposite situation that I have... it's useful on the client side, not on the Internet side. My second attempt was using the script found at http://www.topwebhosts.org/tools/traffic-control.php, which I modified so the active part is: tc qdisc add dev eth0.113 root handle 13: htb default 100 tc class add dev eth0.113 parent 13: classid 13:1 htb rate 3mbps tc class add dev eth0.113 parent 13: classid 13:2 htb rate 3mbps tc filter add dev eth0.113 protocol ip parent 13:0 prio 1 u32 match ip dst 192.168.13.0/24 flowid 13:1 tc filter add dev eth0.113 protocol ip parent 13:0 prio 1 u32 match ip src 192.168.13.0/24 flowid 13:2 What I want this to do is restrict the bandwidth on VLAN 113 (subnet 192.168.13.0/24) to 3mbit up and 3mbit down. Unfortunately, it seems to have no effect at all! I'm very inexperienced with the tc command, so any help getting this working would be appreciated.

    Read the article

  • Problems with ipsec betwen Cisco ASA 5505 and Juniper ssg5

    - by Oskar Kjellin
    I am trying to set up an ipsec tunnel between our ASA 5505 and a Juniper ssg5. The tunnel is up and running, but I cannot get any data through it. The local network I am on is 172.16.1.0 and the remote is 192.168.70.0. But I cannot ping anything on their netowork. I receive a "Phase 2 OK" when I set up the ipsec. I think this is the part of the config that is applicable. It seems like the data is not routed through the tunnel, but I am not sure... object network our-network subnet 172.16.1.0 255.255.255.0 object network their-network subnet 192.168.70.0 255.255.255.0 access-list outside_cryptomap extended permit ip object our-network object their-network crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer THEIR_IP crypto map outside_map 1 set ikev1 phase1-mode aggressive crypto map outside_map 1 set ikev1 transform-set ESP-3DES-MD5 crypto map outside_map 1 set ikev2 pre-shared-key ***** crypto map outside_map 1 set reverse-route crypto map outside_map interface outside webvpn group-policy GroupPolicy_THEIR_IP internal group-policy GroupPolicy_THEIR_IP attributes vpn-filter value outside_cryptomap ipv6-vpn-filter none vpn-tunnel-protocol ikev1 tunnel-group THEIR_IP type ipsec-l2l tunnel-group THEIR_IP general-attributes default-group-policy GroupPolicy_THEIR_IP tunnel-group THEIR_IP ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key *****

    Read the article

  • Limiting interface bandwidth with tc under Linux

    - by Matt
    I have a linux router which has a 10GBe interface on the outside and bonded Gigabit ethernet interfaces on the inside. We have currently budget for 2GBit/s. If we exceed that rate by more than 5% average for a month then we'll be charged for the whole 10Gbit/s capacity. Quite a step up in dollar terms. So, I want to limit this to 2GBit/s on 10GBe interface. TBF filter might be ideal, but this comment is of concern. On all platforms except for Alpha, it is able to shape up to 1mbit/s of normal traffic with ideal minimal burstiness, sending out data exactly at the configured rates. Should I be using TBF or some other filter to apply this rate to the interface and how would I do it. I don't understand the example given here: Traffic Control HOWTO In particular "Example 9. Creating a 256kbit/s TBF" tc qdisc add dev eth0 handle 1:0 root dsmark indices 1 default_index 0 tc qdisc add dev eth0 handle 2:0 parent 1:0 tbf burst 20480 limit 20480 mtu 1514 rate 32000bps How is the 256K bit/s rate calculated? In this example, 32000bps = 32k bytes per second. Since tc uses bps = bytes per second. I guess burst and limit come into play but how would you go about choosing sensible numbers to reach the desired rate? This is not a mistake. I tested this and it gave a rate close to 256K but not exactly that.

    Read the article

  • Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

    - by dgwilson
    We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

    Read the article

  • Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

    - by dgwilson
    We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

    Read the article

  • Port translation in router causing some email to fail

    - by user22037
    We are in the process of setting up a spam filter (SAVASM). One change we are making is to push incoming email on port 25 through our spam filter/server but have users actually send their email on a different port. I am attempting to make this happen by using port address translation to send port 25 traffic to the SAVASM server IP. As a step in making this change I setup port translation without actually changing the IP addresses. The NAT rules for the email server went from one Static NAT rule with no port specified, to multiple Static NAT rules each with a port or group matching the Access Rules for that server (smtp, pop3, http, https, and some other custom ports). The problem we are running into is confusing. Some outgoing mail through this server is failing when the router has the multiple NAT rules with port translation settings. Email goes through fine FROM our email to our internal accounts and to Gmail. However email fails when FROM our client's email address TO our client's email or their personal Comcast. The only situation that worked for them was if they changed FROM to Comcast and then messages went through fine to both Comcast and the client's accounts. Switching back to regular Static NAT rule everything then worked for them. Does anyone have a clue as to what might be going on? We are on a Cisco ASA 5500 box.

    Read the article

  • Configuring port forwarding for SSH - no response outside LAN [migrated]

    - by WinnieNicklaus
    I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

    Read the article

  • Configuring port forwarding for SSH - no response outside LAN

    - by WinnieNicklaus
    I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

    Read the article

  • Regarding traffic shaping on juniper SRX550

    - by peilin
    We have implemented the Juniper SRX550 in our company. Now we have one issue that how to restrict the internal user download speed from internet. Take one example that i want to restrict the end user with IP:192.168.1.20/32 downloading speed up to 1M via my external port ge-0/0/6.0. Below is my setting: [edit firewall policer p1M] root@SRX550# show if-exceeding { bandwidth-limit 1m; burst-size-limit 15k; } then discard; [edit firewall family inet] root@SRX550# show filter limit-user term 10 { from { destination-address { 192.168.1.20/32; } } then policer p1M; } term else { then accept; } [edit interfaces ge-0/0/6] root@SRX550# show per-unit-scheduler; unit 0 { family inet { filter { input limit-user; } address Hidden Here; } } As per the setting, the end user downloading speed should not exceed the 1m (125KB in windows), but the result is the downloading speed for this end users still can up to 400KB via HTTP/HTTPS. Please advise. Thanks.

    Read the article

  • directory services group query changing randomly

    - by yamspog
    I am receiving an unusual behaviour in my asp.net application. I have code that uses Directory Services to find the AD groups for a given, authenticated user. The code goes something like ... string username = "user"; string domain = "LDAP://DC=domain,DC=com"; DirectorySearcher search = new DirectorySearcher(domain); search.Filter = "(SAMAccountName=" + username + ")"; And then I query and get the list of groups for the given user. The problem is that the code was receiving the list of groups as a list of strings. With our latest release of the software, we are starting to receive the list of groups as a byte[]. The system will return string, suddenly return byte[] and then with a reboot it returns string again. Anyone have any ideas? code sample: DirectoryEntry dirEntry = new DirectoryEntry("LDAP://" + ldapSearchBase); DirectorySearcher userSearcher = new DirectorySearcher(dirEntry) { SearchScope = SearchScope.Subtree, CacheResults = false, Filter = ("(" + txtLdapSearchNameFilter.Text + "=" + userName + ")") }; userResult = userSearcher.FindOne(); ResultPropertyValueCollection valCol = userResult.Properties["memberOf"]; foreach (object val in valCol) { if (val is string) { distName = val.ToString(); } else { distName = enc.GetString((Byte[])val); } }

    Read the article

  • sysctl.conf not running on boot

    - by Brian
    At what point is sysctl.conf supposed to be read during boot, and why might it not be running? I have the following settings which are not being applied when I reboot: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 fs.nfs.nlm_udpport = 32768 fs.nfs.nlm_tcpport = 32768 The first section is needed for KVM bridging, and the second is to run the NFS lock manager on a known port. However, after booting, these values have not taken effect. If I run sysctl -p, then they do. This wouldn't be a huge issue, except that I can't figure out how to restart the lock manager without rebooting. I would really like to know why sysctl.conf isn't working at boot, but I'd settle for just being able to restart the lock manager. This is on Ubuntu server 10.04.2, kernel 2.6.32-31-server. I know some daemons check the permissions on their config files and refuse to work if they're too permissive, but sysctl.conf is 644 root:root, which I'm pretty sure is the default.

    Read the article

  • postfix smtpd rejecting mail from outside network match_list_match: no match

    - by Loopo
    My postfix (V: 2.5.5-1.1) running on ubuntu server (9.04) started to reject mail arriving in from outside about 2 weeks ago. Doing a "manual" session via telnet shows that the connection is always closed after the MAIL FROM: [email protected] line is input, with the message "Connection closed by foreign host." Doing the same from another client inside the LAN works fine. In the log files I get the line "lost connection after MAIL from xxxxx.tld[xxx.xxx.xxx.xxx]" This is after some lines like: match_hostaddr: XXX.XXX.XXX.XXX ~? [::1]/128 match_hostname: XXXX.tld ~? 192.168.1.0/24 ... match_list_match: xxx.xxx.xxx.xxx: no match which seem to suggest some kind of filter which checks for allowed addresses. I have been unable to locate where this filter lives, or how to turn it off. I'm not even sure if that's what's causing my problem. Connections from inside the LAN don't get disconnected even though they also show a "match_list_match: ... no match" line. I didn't change any configuration files recently, below is my main.cf as it currently stands. I don't really know what all the parameters do and how they interact. I just set it up initially and it worked fine (up to recently). smtpd_banner = $myhostname ESMTP $mail_name (GNU) biff = no readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/server.crt smtpd_tls_key_file=/etc/ssl/private/server.key #smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_sasl_auth_enable = no smtp_use_tls=no smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth myhostname = XXXXXXX.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = XXXX.XXXX.com, XXXX.com, localhost.XXXXX.com, localhost relayhost = XXX.XXX.XXX.XXX mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.1.0/24 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_sasl_local_domain = #smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_ when checking the process list, postfix/smtpd runs as smtpd -n smtp -t inet -u -c -o stress -v -v Any clues?

    Read the article

  • Iptables Forwarding problem

    - by ankit
    Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >