Search Results

Search found 5157 results on 207 pages for 'node'.

Page 109/207 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Are there any good Java/JVM libraries for my Expression Tree architecture?

    - by Snuggy
    My team and I are developing an enterprise-level application and I have devised an architecture for it that's best described as an "Expression Tree". The basic idea is that the leaf nodes of the tree are very simple expressions (perhaps simple values or strings). Nodes closer to the trunk will get more and more complex, taking the simpler nodes as their inputs and returning more complex results for their parents. Looking at it the other way, the application performs some task, and for this it creates a root expression. The root expression divides its input into smaller units and creates child expressions, which when evaluated it can use to build it's own result. The subdividing process continues until the simplest leaf nodes. There are two very important aspects of this architecture: It must be possible to manipulate nodes of the tree after it is built. The nodes may be given new input values to work with and any change in result for that node needs to be propagated back up the tree to the root node. The application must make best use of available processors and ultimately be scalable to other computers in a grid or in the cloud. Nodes in the tree will often be updating concurrently and notifying other interested nodes in the tree when they get a new value. Unfortunately, I'm not at liberty to discuss my actual application, but to aid understanding a little bit, you might imagine a kind of spreadsheet application being implemented with a similar architecture, where changes to cells in the table are propagated all over the place to other cells that need the result. The spreadsheet could get so massive that applying multi-core multi-computer distributed system to solve it would be of benefit. I've got my prototype "Expression Engine" working nicely on a single multi-core PC but I've started to run into a few concurrency issues (as expected because I haven't been taking too much care so far) so it's now time to start thinking about migrating the Engine to a more robust library, and that leads to a number of related questions: Is there any precedent for my "Expression Tree" architecture that I could research? What programming concepts should I consider. I realise this approach has many similarities to a functional programming style, and I'm already aware of the concepts of using futures and actors. Are there any others? Are there any languages or libraries that I should study? This question is inspired by my accidental discovery of Scala and the Akka library (which has good support for Actors, Futures, Distributed workloads etc.) and I'm wondering if there is anything else I should be looking at as well?

    Read the article

  • Concept of bit fields

    - by user1369975
    Whenever I read a code like this: struct node { int x : 2; int p : 4; }n; with bit fields involved, I get really confused, as to how they are represented in memory, what is sizeof(n) etc., how does it differ with normal members of structures? I tried referring K&R and http://en.wikipedia.org/wiki/Bit_field but they little to remove my confusion. What concepts of bit fields am I failing to grasp?

    Read the article

  • Configure SQL Express 2005 for remote access

    Please follow the below steps as shown in pictures to configure SQL Server Express 2005 for remote access. Fig1: Open SQL Serve Configuration Manager Fig2: Navigate to SQL Serve 2005 N/W configuration and click on Protocols node Fig3: Enable TCP/IP Protocol Fig4: Enable Named Pipes Protocol Fig5: After enabling TCP/IP and Named Pipes protocols Fig6: Finally click on TCP/IP to configure the port number to listen N/W requests to SQL Express 2005. span.fullpost {display:none;}

    Read the article

  • Biztalk :Tagidentifier for optional records

    - by Mchandak
    I am sure many of us must have faced this issue.Problem:My flat file schema has an optional  record  and marked with a tagidentifier. we would think that the input message without that optional record will pass the schema validation. But by default Biztalk throws an error about the missing record if we try to 'Validate the instance' in the Biztalk mapper.Resolution:On the schema node, set Parser Optimization to “Complexity” instead of thedefault "Speed" optimization.

    Read the article

  • HYPER-V R2 Can not mount ISO from network location (UNC Path)

    - by Entity_Razer
    So, as the name suggest I'm trying to mount a ISO from a network share using the UNC path to a HYPER-V R2 Cluster. This is a pure Demo / test case setup with: 2x HYPER-V R2 1X NAS/iSCSI CSV Cluster Management is happening through the MMC with RSAT tools. So what i've done so far is: Set up the cluster and configure Quorum, add CSV Shares and disks, set up 1 Virtual Machine on the Hyper-1 node. What i'm trying to do is, you go to settings --- DVD Drive --- use network location ---- Pick ISO file and press "apply". Error I'm getting is either "User account does not have rights to mount iso". I changed that or stopped getting that message when I went to the HYPER-V Node settings and tabbed on: "Use Default Credentials Automatically". Now I stopped getting the "user does not have right..." message but I get the following: Error applying DVD Drive Changes Failed to remove device microsoft synthetic DVD Drive:" the specified network resource or device is no longer available" I've google'd the problem but am unable to find a solution. Anyone here able to help me out ? Much abbliged !

    Read the article

  • Cannot bind OSX to AD

    - by erotsppa
    I'm trying to get an mac mini running snow leopard server to join a windows domain here. The windows domain server is running Windows server 2008. When I go to "Accounts" in my System Preferences, and lick on "Join", I get this error: "Unable to add server. Node name wasn't found. (2000)" In my console messages I find this: 10-04-06 11:42:25 AM System Preferences1452 -[ODCAddServerSheetController handleOtherActionError: gotError: Error Domain=com.apple.OpenDirectory Code=2000 UserInfo=0x2004f2f80 "Custom call 82 to Active Directory failed.", Node name wasn't found. I specified a FQDN for the domain server, so I am totally confused as to why it would list "domain = com.apple...." in that error. I've tried firing up the Directory Utility and trying to join a domain via the Active Directory option there. Again I fill in the FQDN, and the proper administrator/password acount info. Now I get a different error: "Invalid Domain An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com)." If anyone has any pointers or suggestions this would be appreciated.

    Read the article

  • SQL Server 2008 Cluster Installation - First network name always fails

    - by boflynn
    I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

    Read the article

  • Avoiding DNS timeouts when a dns server fails

    - by user65124
    Hi there. We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

    Read the article

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

    - by Marcelo Santos
    After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

    Read the article

  • Virutal Machine loses network connectivity on Hyper V Cluster

    - by Chris W
    We're running a number of VMs on a 6 node failover cluster of blades using Hyper V. We have an intermittent issue (every few days at different times - not a fixed frequency) of VMs losing network connectivity. Console access to the VM suggests all is fine and the underlying blade has normal connectivity. To resolve the problem we either have to re-start the VM or, more usually, we do a live migration to another blade which fires up connectivity and we then migrate it back to the original blade. I've had 3 instances of this happen with a specific VM running on a particular blade however it has happened once with a different VM running on a different blade. All VMs and blades have the same basic setup and are running Windows 2008 R2. Any ideas where I should be looking to diagnose the possible causes of this problem as the event logs provide no help? Edit: I've checked that each blade is running the latest NIC drivers and all seem to be fine. Something that is confusing me - a failover or restart of the VM resolves the issue. Whilst I need to work out the underlying issue that is causing the NICs to hang I'm also concerned that the VM didn't failover to another node which would have solved the outage for me. Is there a way to configure the cluster so that it can tell that the VM guest has lost connectivity and fail it over? As things stand the cluster is assuming that the VM is running happily as I presume Hyper V says everything is great even though there is a problem.

    Read the article

  • JBossMQ - Clustered Queues/NameNotFoundException: QueueConnectionFactory error

    - by mfarver
    I am trying to get an application working on a JBoss Cluster. It uses Queues internally, and the developer claims that it should work correctly in a clustered environment. I have jbossmq setup as a ha-singleton on the cluster. The application works correctly on whichever node currently is running the queue, but fails on the other nodes with a: "javax.naming.NameNotFoundException: QueueConnectionFactory not bound" error. I can look at JNDIview from the jmx-console and see that indeed the QueueConnectionFactory class only appears on the primary node in the Global context. Is there a way to see the Cluster's JNDI listing instead of each server? The steps I took from a default Jboss 4.2.3.GA installation were to use the "all" configuration. Then removed /server/all/deploy/hsqldb-ds.xml and /deploy-hasingleton/jms/hsqldb-jdbc2-service.xml, copying the example/jms/mysq-jdbc2-service.xml file into its place (editing that file to use DefaultDS instead of MySqlDS). Finally I created a mysql-ds.xml file in the deploy directory pointing "DefaultDS" at an empty database. I created a -services.xml file in the deploy directory with the queue definition. like the one below: <server> <mbean code="org.jboss.mq.server.jmx.Queue" name="jboss.mq.destination:service=Queue,name=myfirstqueue"> <depends optional-attribute-name="DestinationManager"> jboss.mq:service=DestinationManager </depends> </mbean> </server> All of the other cluster features of working, the servers list each other in the view, and sessions are replicating back and forth. The JBoss documentation is somewhat light in this area, is there another setting I might have missed? Or is this likely to be a code issue (is there different code to do a JNDI lookup in a clusted environment?) Thanks

    Read the article

  • Hyper-V virtual machine can't be migrated to a specific host in the cluster

    - by Massimo
    I have a three-node Hyper-V cluster running on Windows Server 2008 R2 which is working quite flawlessly: there are no errors, live migration works, all hosts can and will happily run all virtual machines, and so on. But one specific virtual machinee is trying to make me go mad: it works on two nodes of the cluster, but not on the third one. Whenever I try to move the VM to that node, be it in a live migration or with the VM powered off, it always fails. In the event log of the host these events are logged: Source: Hyper-V-VMMS Event ID: 16300 Cannot load a virtual machine configuration: General access denied error (0x80070005) (Virtual machine ID <GUID>) Source: Hyper-V-VMMS Evend ID: 20100 The Virtual Machine Management Service failed to register the configuration for the virtual machine '<GUID>' at 'C:\ClusterStorage\<PATH>\<VM>': General access denied error (0x80070005) Source: Hyper-V-High-Availability Event ID: 21102 'Virtual Machine Configuration <VM>' failed to register the virtual machine with the virtual machine management service. All other VMs can be moved to/from the offending host, and the offending VM can be moved between the other two hosts. Also, this is not a storage problem, because there are other VMs in the same cluster volume, and the host has no troubles running them. What's going on here?

    Read the article

  • NFS v4, HA Migration, and stale handles on clients

    - by Karl Katzke
    I'm managing a server running NFS v4 with Pacemaker/OpenAIS. NFS is configured to use TCP. When I migrate the NFS server to another node in the Pacemaker cluster, even though the metadata is persisted, connections from the clients 'hang' and eventually time out after 90 seconds. After that 90 seconds, the old mountpoint becomes 'stale' and the mounted files can no longer be accessed. The 90 second grace period seems to be part of the server configuration and not the client configuration. I see this message on the server: kernel: NFSD: starting 90-second grace period If I restart the NFS client on the client nodes after I migrate (unmounting and then remounting the share), then I don't experience the problem, but connections and file transfers still interrupted. Three questions: What is the 90 second grace period? What's it there for? How can I keep the files from going stale on the clients without restarting them after I migrate the NFS server to another node? Is it actually possible to migrate the NFS server without having large file uploads drop?

    Read the article

  • How can I close a port that appears to be orphaned by Xvfb?

    - by Jim Fiorato
    I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

    Read the article

  • Puppet: array in parameterized classes VS using resources

    - by Luke404
    I have some use cases where I want to define multiple similar resources that should end up in a single file (via a template). As an example I'm trying to write a puppet module that will let me manage the mapping between MAC addresses and network interface names (writing udev's persistent-net-rules file from puppet), but there are also many other similar usage cases. I searched around and found that it could be done with the new parameterised classes syntax: if implemented that way it should end up being used like this: node { "myserver.example.com": class { "network::iftab": interfaces => { "eth0" => { "mac" => "ab:cd:ef:98:76:54" } "eth1" => { "mac" => "98:76:de:ad:be:ef" } } } } Not too bad, I agree, but it would rapidly explode when you manage more complex stuff (think network configurations like in this module or any other multiple-complex-resources-in-a-single-config-file stuff). In a similar question on SF someone suggested using Pienaar's puppet-concat module but I doubt it could get any better than parameterised classes. What would be really cool and clean in the configuration definition would be something like the included host type, it's usage is simple, pretty and clean and naturally maps to multiple resources that will end up being configured in a single place. Transposed to my example it would be like: node { "myserver.example.com": interface { "eth0": "mac" => "ab:cd:ef:98:76:54", "foo" => "bar", "asd" => "lol", "eth1": "mac" => "98:76:de:ad:be:ef", "foo" => "rab", "asd" => "olo", } } ...that looks much better to my eyes, even with 3x options to each resource. Should I really be passing arrays to parameterised classes, or there is a better way to do this kind of stuff? Is there some accepted consensus in the puppet [users|developers] community? By the way, I'm referring to the latest stable release of the 2.7 branch and I am not interested in compatibility with older versions.

    Read the article

  • GlassFish cluster-targeted jdbc is not enabled

    - by Jin Kwon
    I have a GlassFish cluster. When I tried to add node and a instance, DAS saids a bunch of error messages telling Resource [ jdbc/xxxx ] of type [ jdbc ] is not enabled [#|2012-11-14T12:07:04.318+0900|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=2803;_ThreadName=Thread-2;|java.lang.StackOverflowError at java.io.FileOutputStream.writeBytes(Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:318) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:122) at java.io.PrintStream.write(PrintStream.java:480) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:221) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:291) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:295) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:141) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.util.logging.StreamHandler.flush(StreamHandler.java:242) at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:106) at java.util.logging.Logger.log(Logger.java:522) at com.sun.logging.LogDomains$1.log(LogDomains.java:372) at java.util.logging.Logger.doLog(Logger.java:543) at java.util.logging.Logger.log(Logger.java:607) at com.sun.enterprise.resource.deployer.JdbcResourceDeployer.deployResource(JdbcResourceDeployer.java:117) at org.glassfish.javaee.services.ResourceProxy.create(ResourceProxy.java:90) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:507) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455) at javax.naming.InitialContext.lookup(InitialContext.java:411) at javax.naming.InitialContext.lookup(InitialContext.java:411) at com.sun.appserv.connectors.internal.api.ResourceNamingService.lookup(ResourceNamingService.java:221) the JDBC Resource is ok and targeted with the cluster. I've installed the JDBC driver on the new node. Can anybody help?

    Read the article

  • Nexus 1000v VEM fails on 2 out of 8 hosts.

    - by cougar694u
    I have 8 ESXi hosts. I do a fresh install from the installable CD directly to 4u1. We have another 2-node cluster with a working Nexus 1000v primary & secondary. Everything's up and running. I installed 6 hosts and everything worked great, migrated them to the Nexus DVS, and VUM installed the modules. I did the 7th host, and when I tried to migrate it to the DVS, it failed with the following error: Cannot complete a Distributed Virtual Switch operation for one or more host memebers. DVS Operation failed on host , error durring the configuration of the host: create dvswitch failed with the following error message: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0003)= Not found ; Message = Instance(0): Inpute(3) DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception Then, I tried to do host 8, and got the exact same problem. It worked about 15 minutes prior when I did host 6, nothing changed, then went to host 7 and it failed. If I try to remediate either of these two hosts, either patches or extensions, it fails. Anyone else have these problems?

    Read the article

  • Munin 2 data not showing up on graph

    - by letronje
    I have a fresh installation of Munin 2.0.1 on my Ubuntu 12.04 and the first time I tried to view graphs, it showed them properly(After installation, I had to follow http://munin-monitoring.org/wiki/CgiHowto2 to set it up) After that, the graphs show up, but with with just one data point(single vertical line) as if no data is being collected after I tried it for the first time. In Munin 1.4, there was munin-cron which was run every 5 minutes and I saw new data being plotted in the graph atleast every 5 minutes. But If there is no cron job in v2, How does data collection work with Munin2 ? Is the data collected when the graphs are requested ? The file timestamps in /var/lib/munin have not changed after the first time I tried the graphs. But i do see munin-node process running(restarted in several times). I also see no errors in the munin node log files or apache2 log files. Any idea what could be wrong ? Screenshot : http://i.imgur.com/uzuAK.png Also, is there a way to pre-create graphs instead of doing it dynamically, on the fly ?

    Read the article

  • Sort order in Windows Explorer

    - by Haim H.
    The behaviour described below occurs on Windows-7 systems and on Windows XP. We operate in a dual-language environment - English and Hebrew. When in Windows Explorer we sort files by name, the order in which they are listed is not what we would expect. Here is a list of file names as sorted by Windows Explorer (all of the files have a .pdf suffix): 1G110033H-PP 19C050G-PP-ORB 19C050H-PPRM 19C100H-PPRM 19C-MBPS-PP 19C-MBPS-PP-1 29AAC050-PP 29AAC100-PP 29AAC100-PPUL 29B004064-PP 101AC050-PP 101AC100-PP 101B100-PPE 1091003G-PPFSUL 10108033G-PPSA 10125033H-PPM It looks to me that first the items are sorted according to the position of the first alphabetic character in the name, and then, within those groups, they are sorted in "normal" alpha-numeric order. That is, all the files with an alpha character in the first position are on top of the list, followed by those with the first alpha character in the second position, followed by those with the first alpha character in the third position, and so on. An alternate way of looking at this is that, in a file name composed of numbers and letters, the sort treats the first group of numbers in the name as the major sort node, with the rest of the name being the secondary sort node. Now that I understand the sequencing logic, it's not a big problem, but I was wondering why this happens?

    Read the article

  • puppet master --compile logs errors to stdout

    - by danny
    I see a bug about this that was accepted and then closed a year ago: http://projects.puppetlabs.com/issues/3670 but I'm using puppet 2.7.14 and am getting the same issue. I'm trying to use "puppet solo" (i.e. just running puppet apply on each server to be configured) as I only have 2 or 3 servers in this project and adding another server as a puppetmaster would be completely overkill. Unless I'm mistaken, the best way to apply a node manually to a server is to do: puppet master --compile=mynode > catalog.json puppet apply --catalog catalog.json But the puppet master command outputs a couple of warnings and notices to stdout, mixed in with the desired json content. And it uses colored output so I can't just pipe it through egrep -v '^warning:' EDIT: I guess it's not too big of a deal to use grep - since puppet 2.7 pretty-prints the actual content and the warnings don't ever start with spaces, piping the output through egrep '^( |{|})' works So my questions are basically: Is there a better way than this to apply a puppet node without using a puppetmaster? I can't really find any good references online to using puppet without a puppetmaster, even though that seems like a perfectly reasonable thing to do for a small project. Is there a setting or flag that I'm missing that will get puppet master to stop being an asshole and send its errors to stderr instead of stdout? Or do I really have to turn off color logging, then grep to exclude warning: and notice: lines?

    Read the article

  • Windows Server 2008 network speed slow, Xen 3.4.3 HVM ISO

    - by Elliot.Bradshaw
    I've setup a VM running Windows Server 2008 on a host node running Xen 3.4.3-5 and the following kernel: 2.6.18-308.1.1.el5xen #1 SMP Wed Mar 7 05:38:01 EST 2012 i686 i686 i386 GNU/Linux The network speed on the VM is very slow--using the online speed tests I can only get it up to 8-9mbps. The line is 100mbps burstable and the host node has no problem achieving those speeds. If it setup a VM running CentOS, it too has no problems achieving those speeds. I've done some pretty exhaustive troubleshooting, but nothing has helped: New VM installations of Win2k8 do have the same network problem. Upgrading to most recent kernel-xen did not help (2.6.18-308.1.1.el5xen). Upgrading from xen 3.4.0 to xen 3.4.3-5 did not help. Disabling Windows firewall, etc did not help. Changing network card device config from auto negotiation to manually be 100mbps full duplex did not help. Changing the network receive buffer packet size did not help (tried all combos from 64k to 8k). At this point I'm pretty much out of ideas--any help would be appreciated!

    Read the article

  • GlusterFS on VMWare ESXi 5

    - by Dharmavir
    I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

    Read the article

  • How to write re-usable puppet definitions?

    - by Oliver Probst
    I'd like to write a puppet manifest to install and configure an application on target servers. Parts of this manifest shall be re-usable. Thus I used define for defining my re-usable functionality. Doing so, I've always the problem that there are parts of the definition which are not re-usable. A simple example is a bunch of configuration files to be created. These file must be placed in the same directory. This directory must be created only once. Example: nodes.pp node 'myNode.in.a.domain' { mymodule::addconfig {'configfile1.xml': param => 'somevalue', } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', } } mymodule.pp define mymodule::addconfig ($param) { $config_dir = "/the/directory/" #ensure that directory exits: file { $config_dir: ensure => directory, } #create the configuration file: file { $name: path => "${config_dir}/${name}" content => template('a_template.erb'), require => File[$config_dir], } } This example will fail, because now the resource file {$config_dir: is defined twice. As far as I understood, it is required to extract these parts into a class. Then it looks like this: nodes.pp node 'myNode.in.a.domain' { class { 'mymodule::createConfigurationDirectory': } mymodule::addconfig {'configfile1.xml': param => 'somevalue', require => Class ['mymodule::createConfigurationDirectory'], } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', require => Class ['mymodule::createConfigurationDirectory'], } } But this makes my interface hard use. Every user of my module has to know, that there is a class which is additionally required. For this simple use case the additional class might be acceptable. But with growing module complexity (lots of definitions) I'm a bit afraid of confusing the modules user. So I'd like to know is there a better way to handle this dependencies. Ideally, classes like createConfigurationDirectory are hidden from the user of the modules api. Or are there some other "Best Practices"/Patterns handling such dependencies?

    Read the article

  • How to handle server failure in an n-tier architecture?

    - by andy
    Imagine I have an n-tier architecture in an auto-scaled cloud environment with say: a load balancer in a failover pair reverse proxy tier web app tier db tier Each tier needs to connect to the instances in the tier below. What are the standard ways of connecting tiers to make them resilient to failure of nodes in each tier? i.e. how does each tier get the IP addresses of each node in the tier below? For example if all reverse proxies should route traffic to all web app nodes, how could they be set up so that they don't send traffic to dead web app nodes, and so that when new web app nodes are brought online they can send traffic to it? I could run an agent that would update all the configs to all the nodes, but it seems inefficient. I could put an LB pair between each tier, so the tier above only needs to connect to the load balancers, but how do I handle the problem of the LBs dying? This just seems to shunt the problem of tier A needing to know the IPs of all nodes in tier B, to all nodes in tier A needing to know the IPs of all LBs between tiers A and B. For some applications, they can implement retry logic if they contact a node in the tier below that doesn't respond, but is there any way that some middleware could direct traffic to only live nodes in the following tier? If I was hosting on AWS I could use an ELB between tiers, but I want to know how I could achieve the same functionality myself. I've read (briefly) about heartbeat and keepalived - are these relevant here? What are the virtual IPs they talk about and how are they managed? Are there still single points of failure using them?

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >