Search Results

Search found 7473 results on 299 pages for 'usage statistics'.

Page 109/299 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

    - by Ricardo Ferreira
    In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

    Read the article

  • Memory Leak Issue in Weblogic, SUN, Apache and Oracle classes Options

    - by Amit
    Hi All, Please find below the description of memory leaks issues. Statistics show major growth in the perm area (static classes). Flows were ran for 8 hours , Heap dump was taken after 2 hours and at the end. A growth in Perm area was identified Statistics show from our last run 240MB growth in 6 hour,40mb growth every hour 2GB heap –can hold ¾ days ,heap will be full in ¾ days Heap dump show –growth in area as mentioned below JMS connection/session Area Apache org.apache.xml.dtm.DTM[] org.apache.xml.dtm.ref.ExpandedNameTable$ExtendedType org.jdom.AttributeList org.jdom.Content[] org.jdom.ContentList org.jdom.Element SUN * ConstantPoolCacheKlass * ConstantPoolKlass * ConstMethodKlass * MethodDataKlass * MethodKlass * SymbolKlass byte[] char[] com.sun.org.apache.xml.internal.dtm.DTM[] com.sun.org.apache.xml.internal.dtm.ref.ExtendedType java.beans.PropertyDescriptor java.lang.Class java.lang.Long java.lang.ref.WeakReference java.lang.ref.SoftReference java.lang.String java.text.Format[] java.util.concurrent.ConcurrentHashMap$Segment java.util.LinkedList$Entry Weblogic com.bea.console.cvo.ConsoleValueObject$PropertyInfo com.bea.jsptools.tree.TreeNode com.bea.netuix.servlets.controls.content.StrutsContent com.bea.netuix.servlets.controls.layout.FlowLayout com.bea.netuix.servlets.controls.layout.GridLayout com.bea.netuix.servlets.controls.layout.Placeholder com.bea.netuix.servlets.controls.page.Book com.bea.netuix.servlets.controls.window.Window[] com.bea.netuix.servlets.controls.window.WindowMode javax.management.modelmbean.ModelMBeanAttributeInfo weblogic.apache.xerces.parsers.SecurityConfiguration weblogic.apache.xerces.util.AugmentationsImpl weblogic.apache.xerces.util.AugmentationsImpl$SmallContainer weblogic.apache.xerces.util.SymbolTable$Entry weblogic.apache.xerces.util.XMLAttributesImpl$Attribute weblogic.apache.xerces.xni.QName weblogic.apache.xerces.xni.QName[] weblogic.ejb.container.cache.CacheKey weblogic.ejb20.manager.SimpleKey weblogic.jdbc.common.internal.ConnectionEnv weblogic.jdbc.common.internal.StatementCacheKey weblogic.jms.common.Item weblogic.jms.common.JMSID weblogic.jms.frontend.FEConnection weblogic.logging.MessageLogger$1 weblogic.logging.WLLogRecord weblogic.rjvm.BubblingAbbrever$BubblingAbbreverEntry weblogic.rjvm.ClassTableEntry weblogic.rjvm.JVMID weblogic.rmi.cluster.ClusterableRemoteRef weblogic.rmi.internal.CollocatedRemoteRef weblogic.rmi.internal.PhantomRef weblogic.rmi.spi.ServiceContext[] weblogic.security.acl.internal.AuthenticatedSubject weblogic.security.acl.internal.AuthenticatedSubject$SealableSet weblogic.servlet.internal.ServletRuntimeMBeanImpl weblogic.transaction.internal.XidImpl weblogic.utils.collections.ConcurrentHashMap$Entry Oracle XA Transaction oracle.jdbc.driver.Binder[] oracle.jdbc.driver.OracleDatabaseMetaData oracle.jdbc.driver.T4C7Ocommoncall oracle.jdbc.driver.T4C7Oversion oracle.jdbc.driver.T4C8Oall oracle.jdbc.driver.T4C8Oclose oracle.jdbc.driver.T4C8TTIBfile oracle.jdbc.driver.T4C8TTIBlob oracle.jdbc.driver.T4C8TTIClob oracle.jdbc.driver.T4C8TTIdty oracle.jdbc.driver.T4C8TTILobd oracle.jdbc.driver.T4C8TTIpro oracle.jdbc.driver.T4C8TTIrxh oracle.jdbc.driver.T4C8TTIuds oracle.jdbc.driver.T4CCallableStatement oracle.jdbc.driver.T4CClobAccessor oracle.jdbc.driver.T4CConnection oracle.jdbc.driver.T4CMAREngine oracle.jdbc.driver.T4CNumberAccessor oracle.jdbc.driver.T4CPreparedStatement oracle.jdbc.driver.T4CTTIdcb oracle.jdbc.driver.T4CTTIk2rpc oracle.jdbc.driver.T4CTTIoac oracle.jdbc.driver.T4CTTIoac[] oracle.jdbc.driver.T4CTTIoauthenticate oracle.jdbc.driver.T4CTTIokeyval oracle.jdbc.driver.T4CTTIoscid oracle.jdbc.driver.T4CTTIoses oracle.jdbc.driver.T4CTTIOtxen oracle.jdbc.driver.T4CTTIOtxse oracle.jdbc.driver.T4CTTIsto oracle.jdbc.driver.T4CXAConnection oracle.jdbc.driver.T4CXAResource oracle.jdbc.oracore.OracleTypeADT[] oracle.jdbc.xa.OracleXAResource$XidListEntry oracle.net.ano.Ano oracle.net.ns.ClientProfile oracle.net.ns.ClientProfile oracle.net.ns.NetInputStream oracle.net.ns.NetOutputStream oracle.net.ns.SessionAtts oracle.net.nt.ConnOption oracle.net.nt.ConnStrategy oracle.net.resolver.AddrResolution oracle.sql.CharacterSet1Byte we are using Oracle BEA Weblogic 9.2 MP3 JDK 1.5.12 Oracle versoin 10.2.0.4 (for oracle we found one path which is needed to applied to avoid XA transaction memory leaks). But we are stuck to resolve SUN, BEA Weblgogic and Apache leaks. please suggest... regards, Amit J.

    Read the article

  • MySQL is hogging my server resources

    - by Reacen
    Does anyone have any idea of what can cause this weird behaviour and how I go about fixing it? This is all coming from MySQL only (both RAM and CPU usage), for about 10 minutes after I reboot my Java game server (that has a pool of 256 connections). There are not that many queries and I think it may be more of a MySQL misconfiguration problem. My server: 3.20 GHz * 6 core / 24 GB RAM / 64 bit Windows Server 2003. My game server: Java server, with 256 MySQL connections pool (MyISAM engine), about 500,000 accounts, and 9 million rows of game items in database and about 3,000 players are connected. After about 15 minutes of the game server reboot, the server resumes its stability and CPU usage drop down to 1% ~ 5% and memory to 6 GB. Here is a copy of my MySQL configuration. Also, any advice about my MySQL configuration will be appreciated. I really set it up almost at random. # Example MySQL config file for very large systems. # # This is for a large system with memory of 1G-2G where the system runs mainly # MySQL. # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:\mysql\data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] #log=c:\mysql.log port = 3306 socket = /tmp/mysql.sock skip-locking key_buffer_size = 2572M max_allowed_packet = 64M table_open_cache = 512 sort_buffer_size = 128M read_buffer_size = 128M read_rnd_buffer_size = 128M myisam_sort_buffer_size = 500M thread_cache_size = 32 query_cache_size = 1948M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 12 max_connections = 5000 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # # binary logging format - mixed recommended #binlog_format=mixed # Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = C:\mysql\data/ #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend #innodb_log_group_home_dir = C:\mysql\data/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 384M #innodb_additional_mem_pool_size = 20M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 100M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 64M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [myisamchk] key_buffer_size = 256M sort_buffer_size = 256M read_buffer = 8M write_buffer = 8M [mysqlhotcopy] interactive-timeout

    Read the article

  • WCF service monitoring

    - by Cicik
    I am writing WCF service hosted in WinForms application. Is there some way to monitor performance and statistics(count of instances, count of calls to endpoints, duration of calls, etc...) about service and display them in Form in which service is hosted?

    Read the article

  • CruiseControl.Net Publisher email failing to send e-mail

    - by CrimsonX
    So here's my problem: I cannot seem to be able to configure CruiseControl.NET to send out an e-mail to me when a build occurs. I copied the example from the documentation and filled it in with my own values. http://confluence.public.thoughtworks.org/display/CCNET/Email+Publisher Here's the relevant section of ccnet.config below <publishers> <merge> <files> <file>C:\Build\Temp\*.xml</file> </files> </merge> <xmllogger logDir="buildlogs" /> <statistics> <statisticList> <statistic /> </statisticList> </statistics> <email includeDetails="TRUE" mailhostUsername="user" mailhostPassword="password" useSSL="TRUE"> <from>[email protected]</from> <mailhost>mail.mycompanysmtpserver.com</mailhost> <users> <user name="MyName Lastname" group="buildmaster" address="[email protected]" /> </users> <groups> <group name="buildmaster"> <notifications> <notificationType>Always</notificationType> </notifications> </group> </groups> <modifierNotificationTypes> <NotificationType>Failed</NotificationType> <NotificationType>Fixed</NotificationType> </modifierNotificationTypes> <subjectSettings> <subject buildResult="StillBroken" value="Build is still broken for {CCNetProject}" /> </subjectSettings> </email> </publishers> I have had a successful CruiseControl.NET server configured for some time, and it successfully updates people through CCTray, but I need to add e-mail support as well. I've already looked at the relevant StackOverflow articles like this one and many more and tried my hand at googling the solution but I dont know what I could be doing wrong. The only other thing that I'd like to validate is that I can send/receive e-mails using my username/password with the SMTP server I received from IT (my mail works properly) but I just followed the steps on testing an SMTP server here and everything looks fine http://support.microsoft.com/kb/153119 Anyone have any ideas as to why I'm getting this problem, or how to troubleshoot it further?

    Read the article

  • Face Recognition for classifying digital photos?

    - by Jeremy E
    I like to mess around with AI and wanted to try my hand at face recognition the first step is to find the faces in the photographs. How is this usually done? Do you use convolution of a sample image/images or statistics based methods? How do you find the bounding box for the face? My goal is to classify the pictures of my kids from all the digital photos. Thanks in advance.

    Read the article

  • Random text generator

    - by verbatim64x
    What is the best way to generate random a string which is composed of alphabets and its a maximum of 8million characters which will be tested using string searching algorithms? is Math.random still be ok for the randomness or the reliability of the spread of characters based on statistics? any comment is appreciated, right me if im wrong with my ideas.

    Read the article

  • Does boost::asio makes excessive small heap allocations or am I wrong?

    - by Poni
    #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { if (!error) { data_[bytes_transferred] = '\0'; if(NULL != strstr(data_, "quit")) { this->socket().shutdown(boost::asio::ip::tcp::socket::shutdown_both); this->socket().close(); // how to make this dispatch "handle_read()" with a "disconnected" flag? } else { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { // } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } While experimenting with boost::asio I've noticed that within the calls to async_write()/async_read_some() there is a usage of the C++ "new" keyword. Also, when stressing this echo server with a client (1 connection) that sends for example 100,000 times some data, the memory usage of this program is getting higher and higher. What's going on? Will it allocate memory for every call? Or am I wrong? Asking because it doesn't seem right that a server app will allocate, anything. Can I handle it, say with a memory pool? Another side-question: See the "this-socket().close();" ? I want it, as the comment right to it says, to dispatch that same function one last time, with a disconnection error. Need that to do some clean-up. How do I do that? Thank you all gurus (:

    Read the article

  • How to correctly use DERIVE or COUNTER in munin plugins

    - by Johan
    I'm using munin to monitor my server. I've been able to write plugins for it, but only if the graph type is GAUGE. When I try COUNTER or DERIVE, no data is logged or graphed. The plugin i'm currently stuck on is for monitoring bandwidth usage, and is as follows: /etc/munin/plugins/bandwidth2 #!/bin/sh if [ "$1" = "config" ]; then echo 'graph_title Bandwidth Usage 2' echo 'graph_vlabel Bandwidth' echo 'graph_scale no' echo 'graph_category network' echo 'graph_info Bandwidth usage.' echo 'used.label Used' echo 'used.info Bandwidth used so far this month.' echo 'used.type DERIVE' echo 'used.min 0' echo 'remain.label Remaining' echo 'remain.info Bandwidth remaining this month.' echo 'remain.type DERIVE' echo 'remain.min 0' exit 0 fi cat /var/log/zen.log The contents of /var/log/zen.log are: used.value 61.3251953125 remain.value 20.0146484375 And the resulting database is: <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1269936605 </lastupdate> <!-- 2010-03-30 09:10:05 BST --> <ds> <name> 42 </name> <type> DERIVE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 61.3251953125 </last_ds> <value> NaN </value> <unknown_sec> 5 </unknown_sec> </ds> <!-- Round Robin Archives --> <rra> <cf> AVERAGE </cf> <pdp_per_row> 1 </pdp_per_row> <!-- 300 seconds --> <params> <xff> 5.0000000000e-01 </xff> </params> <cdp_prep> <ds> <primary_value> NaN </primary_value> <secondary_value> NaN </secondary_value> <value> NaN </value> <unknown_datapoints> 0 </unknown_datapoints> </ds> </cdp_prep> <database> <!-- 2010-03-28 09:15:00 BST / 1269764100 --> <row><v> NaN </v></row> <!-- 2010-03-28 09:20:00 BST / 1269764400 --> <row><v> NaN </v></row> <!-- 2010-03-28 09:25:00 BST / 1269764700 --> <row><v> NaN </v></row> <snip> The value for last_ds is correct, it just doesn't seem to make it into the actual database. If I change DERIVE to GAUGE, it works as expected. munin-run bandwidth2 outputs the contents of /var/log/zen.log I've been all over the (sparse) docs for munin plugins, and can't find my mistake. Modifying an existing plugin didn't work for me either.

    Read the article

  • Sites like itjobswatch.co.uk allowing to estimate $ value of particular IT skills and positions

    - by koppernickus
    I am using site itjobswatch to estimate $ value of particular IT skills and positions. I am using it also to observe salary trends for them. Sometimes I also use site salary.com where as a kind of hidden-feature one may list really impressing list of different IT positions and see salary statistics for them. What are the other similar sites, especially for markets other than UK and US?

    Read the article

  • Optimizing MySQL for small VPS

    - by Chris M
    I'm trying to optimize my MySQL config for a verrry small VPS. The VPS is also running NGINX/PHP-FPM and Magento; all with a limit of 250MB of RAM. This is an output of MySQL Tuner... -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.41-3ubuntu12.8 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 1M (Tables: 14) [--] Data in InnoDB tables: 29M (Tables: 301) [--] Data in MEMORY tables: 1M (Tables: 17) [!!] Total fragmented tables: 301 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 2d 11h 14m 58s (1M q [8.038 qps], 33K conn, TX: 2B, RX: 618M) [--] Reads / Writes: 83% / 17% [--] Total buffers: 122.0M global + 8.6M per thread (100 max threads) [!!] Maximum possible memory usage: 978.2M (404% of installed RAM) [OK] Slow queries: 0% (37/1M) [OK] Highest usage of available connections: 6% (6/100) [OK] Key buffer size / total MyISAM indexes: 32.0M/282.0K [OK] Key buffer hit rate: 99.7% (358K cached / 1K reads) [OK] Query cache efficiency: 83.4% (1M cached / 1M selects) [!!] Query cache prunes per day: 48301 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 144K sorts) [OK] Temporary tables created on disk: 13% (27K on disk / 203K total) [OK] Thread cache hit rate: 99% (6 created / 33K connections) [!!] Table cache hit rate: 0% (32 open / 51K opened) [OK] Open file limit used: 1% (20/1K) [OK] Table locks acquired immediately: 99% (1M immediate / 1M locks) [!!] InnoDB data size / buffer pool: 29.2M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increase table_cache gradually to avoid file descriptor limits Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 64M) table_cache (> 32) innodb_buffer_pool_size (>= 29M) and this is the config. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 32M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 sort_buffer_size = 4M read_buffer_size = 4M myisam_sort_buffer_size = 16M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 100 table_cache = 32 tmp_table_size = 128M #thread_concurrency = 10 # # * Query Cache Configuration # #query_cache_limit = 1M query_cache_type = 1 query_cache_size = 64M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ The site contains 1 wordpress site,so lots of MYISAM but mostly static content as its not changing all that often (A wordpress cache plugin deals with this). And the Magento Site which consists of a lot of InnoDB tables, some MyISAM and some INMEMORY. The "read" side seems to be running pretty well with a mass of optimizations I've used on Magento, the NGINX setup and PHP-FPM + XCACHE. I'd love to have a kick in the right direction with the MySQL config so I'm not blindly altering it based on the MySQLTuner without understanding what I'm changing. Thanks

    Read the article

  • Qt Linker Errors

    - by Kyle Rozendo
    Hi All, I've been trying to get Qt working (QCreator, QIde and now VS2008). I have sorted out a ton of issues already, but I am now faced with the following build errors, and frankly I'm out of ideas. Error 1 error LNK2019: unresolved external symbol "public: void __thiscall FileVisitor::processFileList(class QStringList)" (?processFileList@FileVisitor@@QAEXVQStringList@@@Z) referenced in function _main codevisitor-test.obj Question1 Error 2 error LNK2019: unresolved external symbol "public: void __thiscall FileVisitor::processEntry(class QString)" (?processEntry@FileVisitor@@QAEXVQString@@@Z) referenced in function _main codevisitor-test.obj Question1 Error 3 error LNK2019: unresolved external symbol "public: class QString __thiscall ArgumentList::getSwitchArg(class QString,class QString)" (?getSwitchArg@ArgumentList@@QAE?AVQString@@V2@0@Z) referenced in function _main codevisitor-test.obj Question1 Error 4 error LNK2019: unresolved external symbol "public: bool __thiscall ArgumentList::getSwitch(class QString)" (?getSwitch@ArgumentList@@QAE_NVQString@@@Z) referenced in function _main codevisitor-test.obj Question1 Error 5 error LNK2019: unresolved external symbol "public: void __thiscall ArgumentList::argsToStringlist(int,char * * const)" (?argsToStringlist@ArgumentList@@QAEXHQAPAD@Z) referenced in function "public: __thiscall ArgumentList::ArgumentList(int,char * * const)" (??0ArgumentList@@QAE@HQAPAD@Z) codevisitor-test.obj Question1 Error 6 error LNK2019: unresolved external symbol "public: __thiscall FileVisitor::FileVisitor(class QString,bool,bool)" (??0FileVisitor@@QAE@VQString@@_N1@Z) referenced in function "public: __thiscall CodeVisitor::CodeVisitor(class QString,bool)" (??0CodeVisitor@@QAE@VQString@@_N@Z) codevisitor-test.obj Question1 Error 7 error LNK2001: unresolved external symbol "public: virtual struct QMetaObject const * __thiscall FileVisitor::metaObject(void)const " (?metaObject@FileVisitor@@UBEPBUQMetaObject@@XZ) codevisitor-test.obj Question1 Error 8 error LNK2001: unresolved external symbol "public: virtual void * __thiscall FileVisitor::qt_metacast(char const *)" (?qt_metacast@FileVisitor@@UAEPAXPBD@Z) codevisitor-test.obj Question1 Error 9 error LNK2001: unresolved external symbol "public: virtual int __thiscall FileVisitor::qt_metacall(enum QMetaObject::Call,int,void * *)" (?qt_metacall@FileVisitor@@UAEHW4Call@QMetaObject@@HPAPAX@Z) codevisitor-test.obj Question1 Error 10 error LNK2001: unresolved external symbol "protected: virtual bool __thiscall FileVisitor::skipDir(class QDir const &)" (?skipDir@FileVisitor@@MAE_NABVQDir@@@Z) codevisitor-test.obj Question1 Error 11 fatal error LNK1120: 10 unresolved externals ... \Visual Studio 2008\Projects\Assignment1\Question1\Question1\Debug\Question1.exe Question1 The code is as follows: #include "argumentlist.h" #include <codevisitor.h> #include <QDebug> void usage(QString appname) { qDebug() << appname << " Usage: \n" << "codevisitor [-r] [-d startdir] [-f filter] [file-list]\n" << "\t-r \tvisitor will recurse into subdirs\n" << "\t-d startdir\tspecifies starting directory\n" << "\t-f filter\tfilename filter to restrict visits\n" << "\toptional list of files to be visited"; } int main(int argc, char** argv) { ArgumentList al(argc, argv); QString appname = al.takeFirst(); /* app name is always first in the list. */ if (al.count() == 0) { usage(appname); exit(1); } bool recursive(al.getSwitch("-r")); QString startdir(al.getSwitchArg("-d")); QString filter(al.getSwitchArg("-f")); CodeVisitor cvis(filter, recursive); if (startdir != QString()) { cvis.processEntry(startdir); } else if (al.size()) { cvis.processFileList(al); } else return 1; qDebug() << "Files Processed: %d" << cvis.getNumFiles(); qDebug() << cvis.getResultString(); return 0; } Thanks in advance, I'm simply stumped.

    Read the article

  • Classification of relationships in words?

    - by C.
    Hi, I'm not sure whats the best algorithm to use for the classification of relationships in words. For example in the case of a sentence such as "The yellow sun" there is a relationship between yellow and sun. THe machine learning techniques I have considered so far are Baynesian Statistics, Rough Sets, Fuzzy Logic, Hidden markov model and Artificial Neural Networks. Any suggestions please? thank you :)

    Read the article

  • Google API to figure how many times a keyword is searched.

    - by Gal
    Is there a Google API tool to get how many times a specific term was searched between a certain interval (month/day/year)? From my understanding, what I'm looking for is similar to Google Keywords Tool, but I prefer not to fill in their captcha everytime, and I want to know only the statistics that suit the entered term. Does Google/others offer an API to do this?

    Read the article

  • _heapwalk reports _HEAPBADNODE, causes breakpoint or loops endlessly

    - by Stefan Hubert
    I use _heapwalk to gather statistics about the Process' standard heap. Under certain circumstances i observe unexpected behaviours like: _HEAPBADNODE is returned some breakpoint is triggered inside _heapwalk, telling me the heap might got corrupted access violation inside _heapWalk. I saw different behaviours on different Computers. On one Windows XP 32 bit machine everything looked fine, whereas on two Windows XP 64 bit machines i saw the mentioned symptoms. I saw this behaviour only if LowFragmentationHeap was enabled. I played around a bit. I walked the heap several times right one after another inside my program. First time doing nothing in between the subsequent calls to _heapWalk (everything fine). Then again, this time doing some stuff (for gathering statistics) in between two subsequent calls to _heapWalk. Depending upon what I did there, I sometimes got the described symptoms. Here finally a question: What exactly is safe and what is not safe to do in between two subsequent calls to _heapWalk during a complete heap walk run? Naturally, i shall not manipulate the heap. Therefore i doublechecked that i don't call new and delete. However, my observation is that function calls with some parameter passing causes my heap walk run to fail already. I subsequently added function calls and increasing number of parameters passed to these. My feeling was two function calls with two paramters being passed did not work anymore. However I would like to know why. Any ideas why this does not happen on some machines? Any ideas why this only happens if LowFragmentationHeap is enabled? Sample Code finally: #include <malloc.h> void staticMethodB( int a, int b ) { } void staticMethodA( int a, int b, int c) { staticMethodB( 3, 6); return; } ... _HEAPINFO hinfo; hinfo._pentry = NULL; while( ( heapstatus = _heapwalk( &hinfo ) ) == _HEAPOK ) { //doing nothing here works fine //however if i call functions here with parameters, this causes //_HEAPBADNODE or something else staticMethodA( 3,4,5); } switch( heapstatus ) { ... case _HEAPBADNODE: assert( false ); /*ERROR - bad node in heap */ break; ...

    Read the article

  • Slow (to none) performance on SQL 2005 after attaching SQL 2000 database

    - by ploft
    Issue: Using the detach/attach SQL database from a SQL 2000 SP4 instance to a much beefier SQL 2005 SP2 server. Run reindex, reorganize and update statistics a couple of times, but without any success. Queries on SQL 2000 took about 1-2 sec. to complete, now the same queries take 2-3 min on the SQL 2005 (and even 2008 - tested it there also). Have looked at the execution plans and the overall percent matches or are alike on each server.

    Read the article

  • Can someone explain the "use-cases" for the default munin graphs?

    - by exhuma
    When installing munin, it activates a default set of plugins (at least on ubuntu). Alternatively, you can simply run munin-node-configure to figure out which plugins are supported on your system. Most of these plugins plot straight-forward data. My question is not to explain the nature of the data (well... maybe for some) but what is it that you look for in these graphs? It is easy to install munin and see fancy graphs. But having the graphs and not being able to "read" them renders them totally useless. I am going to list standard plugins which are enabled by default on my system. So it's going to be a long list. For completeness, I am also going to list plugins which I think to understand and give a short explanation as to what I think it's used for. Pleas correct if I am wrong with any of them. So let me split this questions in three parts: Plugins where I don't even understand the data Plugins where I understand the data but don't know what I should look out for Plugins which I think to understand Plugins where I don't even understand the data These may contain questions that are not necessarily aimed at munin alone. Not understanding the data usually mean a gap in fundamental knowledge on operating systems/hardware.... ;) Feel free to respond with a "giyf" answer. These are plugins where I can only guess what's going on... I hardly want to look at these "guessing"... Disk IOs per device (IOs/second)What's an IO. I know it stands for input/output. But that's as far as it goes. Disk latency per device (Average IO wait)Not a clue what an "IO wait" is... IO Service TimeThis one is a huge mess, and it's near impossible to see something in the graph at all. Plugins where I understand the data but don't know what I should look out for IOStat (blocks/second read/written)I assume, the thing to look out for in here are spikes? Which would mean that the device is in heavy use? Available entropy (bytes)I assume that this is important for random number generation? Why would I graph this? So far the value has always been near constant. VMStat (running/I/O sleep processes)What's the difference between this one and the "processes" graph? Both show running/sleeping processes, whereas the "Processes" graph seems to have more details. Disk throughput per device (bytes/second read/written) What's thedifference between this one and the "IOStat" graph? inode table usageWhat should I look for in this graph? Plugins which I think to understand I'll be guessing some things here... correct me if I am wrong. Disk usage in percent (percent)How much disk space is used/remaining. As this is approaching 100%, you should consider cleaning up or extend the partition. This is extremely important for the root partition. Firewall Throughput (packets/second)The number of packets passing through the firewall. If this is spiking for a longer period of time, it could be a sign of a DOS attack (or we are simply recieving a large file). It can also give you an idea about your firewall performance. If it's levelling out and you need more "power" you should consider load balancing. If it's levelling out and see a correlation with your CPU load, it could also mean that your hardware is not fast enough. Correlations with disk usage could point to excessive LOG targets in you FW config. eth0 errors (packets in/out)Network errors. If this value is increasing, it could be a sign of faulty hardware. eth0 traffic (bits/second in/out)Raw network traffic. This should correlate with Firewall throughput. number of threadsAn ever-increasing value might point to a process not properly closing threads. Investigate! processesBreakdown of active processes (including sleeping). A quick spike in here might point to a fork-bomb. A slowly, but ever-increasing value might point to an application spawning sub-processes but not properly closing them. Investigate using ps faux. process priorityThis shows the distribution of process priorities. Having only high-priority processes is not of much use. Consider de-prioritizing some. cpu usageFairly straight-forward. If this is spiking, you may have an attack going on, or a process is hogging the CPU. Idf it's slowly increasing and approaching max in normal operations, you should consider upgrading your hardware (or load-balancing). file table usageNumber of actively open files. If this is reaching max, you may have a process opening, but not properly releasing files. load averageShows an summarized value for the system load. Should correlate with CPU usage. Increasing values can come from a number of sources. Look for correlations with other graphs. memory usageA graphical representation of you memory. As long as you have a lot of unused+cache+buffers you are fine. swap in/outShows the activity on your swap partition. This should always be 0. If you see activity on this, you should add more memory to your machine!

    Read the article

  • What is an efficient method for partitioning and aggregating intervals from timestamped rows in a da

    - by mattrepl
    From a data frame with timestamped rows (strptime results), what is the best method for aggregating statistics for intervals? Intervals could be an hour, a day, etc. I've found the aggregate function, but that doesn't help with assigning each row to an interval. I'm planning on adding a column to the data frame that denotes interval and using that with aggregate, but if there's a better solution it'd be great to hear it. Thanks for any pointers!

    Read the article

  • How to access Memory pool mbeans

    - by nandula-shankar
    Hi, I want to access MemoryPool Mbeans through a java program so that I can retrieve the Eden Space, Perm Gen space, CodeCahe, Survior Space statistics during a period of time. How to do this? I tried java.lang:type=MemoryPool,name=Eden Space I wan not lucky Thanks, Shankar

    Read the article

  • Python run command line (time)

    - by pns
    Hi, I want to run the 'time' unix command from a Python script, to time the execution of a non Python app. I would use the os.system method. Is there any way to save the output of this in Python? My goal is to run the app several times, save their execution times and then do some statistics on them. Thank You

    Read the article

  • Apache: How can i see my localhost on 192.168.1.101 from 192.168.1.102?

    - by takpar
    Hi, I'm running Apache on Ubuntu. My IP address is 192.168.1.101 While http://localhost and http://192.168.1.101 work fine in my PC, I cannot access it from within my laptop using http://192.168.1.102 It's strange. I can ping 192.168.1.101 but I got "The connection has timed out." in browser. I'm using default apache config. so this is what my sites-available/default looks like: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/www/public_html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/www/public_html> Options Indexes FollowSymLinks MultiViews #AllowOverride None AllowOverride all Order allow,deny allow from all </Directory> /etc/apache2/posrts.conf NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> my laptop runs Ubuntu as well. so I don't think this is a firewall issue. commands executed in Laptop (192.168.1.102): adp@adp-laptop:~$ ping 192.168.1.101 PING 192.168.1.101 (192.168.1.101) 56(84) bytes of data. 64 bytes from 192.168.1.101: icmp_seq=1 ttl=64 time=32.1 ms 64 bytes from 192.168.1.101: icmp_seq=2 ttl=64 time=54.8 ms 64 bytes from 192.168.1.101: icmp_seq=3 ttl=64 time=77.0 ms 64 bytes from 192.168.1.101: icmp_seq=4 ttl=64 time=100 ms ^C --- 192.168.1.101 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 32.193/66.193/100.717/25.463 ms adp@adp-laptop:~$ telnet 192.168.1.101 80 Trying 192.168.1.101... telnet: Unable to connect to remote host: Connection timed out commands executed in PC (192.168.1.101): adp@adp-desktop:~$ ps afx | grep http 12672 pts/4 S+ 0:00 | \_ grep --color=auto http adp@adp-desktop:~$ ping 192.168.1.102 PING 192.168.1.102 (192.168.1.102) 56(84) bytes of data. 64 bytes from 192.168.1.102: icmp_seq=1 ttl=64 time=32.1 ms 64 bytes from 192.168.1.102: icmp_seq=2 ttl=64 time=54.8 ms 64 bytes from 192.168.1.102: icmp_seq=3 ttl=64 time=77.0 ms 64 bytes from 192.168.1.102: icmp_seq=4 ttl=64 time=100 ms ^C --- 192.168.1.102 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 32.193/66.193/100.717/25.463 ms adp@adp-desktop:~$ telnet 192.168.1.102 80 Trying 192.168.1.102... telnet: Unable to connect to remote host: Connection refused adp@adp-desktop:~$ telnet 192.168.1.102 Trying 192.168.1.102... telnet: Unable to connect to remote host: Connection refused What should i do?

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >