Search Results

Search found 1114 results on 45 pages for 'acer revo'.

Page 11/45 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • Input not supported message when monitor is powered off then back on

    - by Jason Down
    I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

    Read the article

  • is a mini PCIe SSD worth it?

    - by Narcolapser
    Question: Is getting a mini-PCIe worth investing in? Info: I have a an Acer Aspire 1 n270. It has this mini PCIe slot that is just sitting there empty. I would like to change this, and I would like to speed up my boot time. So I've been considering getting a mini-PCIe SSD. They are about the same price as faster same size drives of the 2.5" variation. The advantage of the mini-PCIe card is that I can have my HDD still. So I have good boot time, but still have the storage of my HDD. What I want to know is: will this allow me to spin down the HDD more often allowing me to save power? Will the OS (Ubuntu 10.04 LTS) see them as separate drives? Is there anything that the mini-PCIe slot could be better used for? Thanks. ~n

    Read the article

  • newbie hard drive upgrade question

    - by musoNic80
    I have an Acer Aspire 3500WLMi laptop. It currently has a 40gb hard drive which I would like to upgrade. Could someone talk me through the process? I've listed my concerns/queries... Can I buy and install any 2.5" SATA or IDE hard drive into this machine? Should I buy somesort of USB caddy and clone my existing drive onto the new one via USB then physically swap the drives over? My current disk is partitioned to include a small amount of space for a Ubuntu install. Will a clone keep the current partition sizes or is it best for me to repartition once I've cloned? Many thanks.

    Read the article

  • Create netbook recovery image without DVD burner (virtual burner?)

    - by Dan
    I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

    Read the article

  • Laptop charger disconnects and reconnects, charger or battery broken?

    - by Rob
    I've got an Acer Aspire One netbook (AOA-150) and there's obviously something wrong with it. The charging port gets VERY HOT and the charger seems to disconnect and reconnect quickly sometimes. This only happens when the netbook is running, and it doesn't seem to care what it's doing other than being on. The battery has an extremely short life (< 30minutes, sometimes) and I almost exclusively run it on the power cable (which needs the battery plugged in. Having it just plugged into the wall won't start up). Does this sound like a problem with the power cable or the battery? The plug for the cable and the port get so hot that if I held them for longer than a few seconds, I'm sure I'd get burnt. EDIT Just got "Popular Question" on this and it WAS the power jack. The ground on it came loose from the board. A bit of solder on it and everything is working great again.

    Read the article

  • Is it safe to buy a replacement laptop battery that has slightly different voltage than the original?

    - by Hugoagogo
    I'm looking for a new battery for my Acer Aspire 4741g laptop. I am trying to get a higher capacity battery. Many sites (like this one and this one) list batteries that are interchangeable with the battery that came with the laptop (AS10D41). These batteries have higher capacity, but also marginally lower voltage (11.1V vs. 11.8V). Is this a problem? Does it mean that the battery is actually incompatible? The replacement battery I am looking at is AS10G3E, and is listed in many places as being compatible with the AS10D41, but nobody makes any mention of the differing voltages. I am trying to find out what kind of problems a lower voltage battery can cause. I know P=IV; with reduced voltage, will the machine draw more current, possibly damaging components? I'm just speculating, but I'm worried about the chance that using a battery at a lower voltage will damage my laptop.

    Read the article

  • Laptop not powering down when lid is closed, but when lid is opened

    - by BENBUN
    Currently when I close the lid of my Acer laptop running Windows Vista, the laptop does not power down; however, when I open the lid it does. When looking at the power settings it is set to power down when closing the lid. The trigger to this seems to be the lid being opened not being closed. I seem to recall this behaviour changing when I installed Windows Media centre. Any ideas on how I can get the power down to work on the lid closing? Thanks.

    Read the article

  • Stop Touchpad from disabling itself when I press any keys?

    - by ApprenticeHacker
    I have an acer E1-571 laptop, with an ELAN Smart Pad. Unfortunately the "Smart" pad is a bit too smart. It automatically disables itself while I am pressing any keys. This is useful when typing. However it does not allow me to play games that use the mouse for scrolling such as Counter Strike and GTA San Andreas as the touchpad gets disabled when I press any key. I tried to find an option or check-box of some kind that would disable this behavior in the ELAN Smart Device Driver's Properties and the Windows 7 Control Panel, but to no avail. Any ideas?

    Read the article

  • How to turn off ATI adapter on Acer Timeline 4810G with ubuntu 9.10

    - by netimen
    I can't turn off my ATI adapter. I have applied the fix, but still lspci | grep VGA gives 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] (rev ff) and my power consumption is about 15W (Wi-Fi on). I run ubuntu 9.10, kernel 2.6.31-14-generic. BIOS version 2.30

    Read the article

  • Acer OrbiCam in Acer 5102WLMI with Windows 7 Pro won't work?

    - by pegazuz
    My camera seems to open up but shuts down right away without showing any picture. the message is Windows is checking for solutions but never finds any. I have tried several different drivers and tried re-installing OrbiCam software several times. Anyone know ofany drivers or software that might work or have any ideas on how to fix it?

    Read the article

  • reset bios on a acer 5050

    - by doug
    Besides tacking off the cmos battery, what else can I do In order to reset my BIOS to default? ATM bios access is password protected and I don't know the password anymore. On regular PC stations, there was a jumper, but where is that on a laptop mobo? Do you know any other way of resetting the bios on a laptop?

    Read the article

  • Sound card issues (High Definition Audio Controller)

    - by Prakash R
    I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

    Read the article

  • 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

    - by Arch Angel
    Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

    Read the article

  • FPS lags with new acer aspire 5755G

    - by Calvin
    The title is kind of self explanatory, as my new laptop lags and has FPS drops. For example my FPS in Starcraft 2 hovers around 20 and constantly drops to 1 with low settings when I know it should run smoothly in high settings. I've updated my Nvidia driver, and set the preferred global settings to the 'High-performance Nvidia processor'. Here are some screen shots. Screen Shot One - Screen Shot Two - Screen Shot Three I'm not sure how to fix this problem, any feed back would be nice!

    Read the article

  • problem booting crusty old windows XP

    - by Carson Myers
    I have an acer aspire laptop running Windows XP home. I believe I have some virus on it, I'm not sure--I mostly just run linux in a VM on it so I wasn't too worried. I'm not sure if that virus caused this problem. The laptop wasn't recognizing my USB hard drive for some reason so I decided to restart it. When it started up, it got past the memory test, past the boot screen, (but it paused right here on a blank screen for awhile) and flashed the desktop once (like it does just before the login screen) and then crashed. I got a quick BSOD and then it restarted. Then it tried to boot again, etc etc infinite loop of failure. Well, before trying safe mode, I disabled automatic restart on system crash so I could read the blue screen. There wasn't anything important on it, it said *** STOP: 0x00000000 (0xC0000000 0x,.... ) beginning physical memory dump physical memory dump complete That's not verbatim (obviously) but it didn't help me. so I booted in safe mode, and it stopped on the driver gagp30kx.sys and then restarted (and infinite loop of failure again). I burned a recovery CD and tried that. It loaded it, and I went into repair mode. I ran chkdsk and then disabled the AGP driver. Same thing on booting in safe mode except it stopped at mup.sys instead. I enabled the AGP driver again, and ran chkdsk again from the CD. It said it found problems but didn't say it fixed them. So I ran it a second time, and it said "performing additional checking or recovery" lots of times (I can't tell how many, they went above the screen top). I tried booting again and no luck. Every time I run chkdsk after trying to boot again it says it found and fixed more errors. I think it might be whatever driver is after the AGP driver, but I don't know what it is or how to find out. Can anyone help me fix this?

    Read the article

  • Diagnosing RAM issues

    - by TaylorND
    I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

    Read the article

  • Compiz and Desktop Effects on Netbook with External Monitor

    - by Nerdfest
    I have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off. I've seen a few mentions of this problem on the Ubuntu forums, but never a solid solution. Any ideas? A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB). In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.

    Read the article

  • How can I set my resolution to 1280x1024 on an Acer Aspire Revo 3700?

    - by torbengb
    I've just set up a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. Almost everything works OK, but the graphics are not OK: the recommended Nvidia driver is activated but the monitor is not detected, so the resolution is wrong. How can I make Ubuntu detect my monitor? How can I get the proper resolution (1280x1024) in Ubuntu? I know that my monitor is not a CRT but an LCD: it's a BenQ, model T905, with 1280x1024 resolution at 60Hz, connected via a normal VGA cable. DVI or HDMI is not an option. When I go to SystemPrefsMonitors, I get: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? YES NO If I say NO then I get a window: or for YES I get this: In both cases I don't see that I can fix this problem. The main reason for getting this new computer was that I was sick of having graphics problems on the old one with a very ugly solution that didn't give me hardware support - but at least I got the resultion. Why is this so difficult... sigh!

    Read the article

  • netbook intel GMA 3150 external monitor 1920x1080 flicker problem

    - by seyenne
    Dear all, i recently purchased a acer netbook (apsire one d260). It runs flawlessly. Yesterday I bought a samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cabel to connect, the monitor instantly switches to the native resolution and now the problem: Occasionaly, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out, that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time..Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur...but for sure, soon or later it will happen again.. I Forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

    Read the article

  • How do i tell if my drivers are up to date on Acer?

    - by joe
    Hoping some kind souls can help me out ? I got a blue screen the other day after trying to load sandboxie. So its obviously conflicting with something. I checked if my drivers were up to date on my acer aspire one AOD270 on this intel based site; http://www.drivermanager.com/en/down...tel&Logo=intel Its showing i have 2 drivers that need updating ; Intel NM10 Express chipset and the Realtek PCIE Cardreader. I have no idea whether to do the update via the Intel Driver update site or the Acer drivers download page? I then ran Bluescreenview and on the dump file its showing ; ''caused by driver'' igdkmd32.sys ''file description'' Intel (R) WDDM Kernel mode driver ''product name''Intel Graphics Accelerator Drivers for Windows 7(R) I bought the laptop here in SE Asia about a year ago. The ''HOT!! NEW download tool'' on the acer drivers site (below) doesnt seem to work and the info about removing and installing drivers is limited. Not sure what to trust on non acer/manufacturer sites. http://support.acer.com/us/en/produc...1&modelId=4040 I've located the igdkmd32.sys file inside the INTEL GRAPHICS MEDIA ACCELERATOR 3600 SERIES 8.14.8.1064. When i click on ''update driver'' in control panel it searches and says its up to date. In windows maintenance it says this intel had a problem, but no solution. For all i know my drivers could be up to date and its something else. Can anybody advise a dummy step by step the process i should follow ? I've never done this before. eg do i delete the old driver first and then download the new one.how much of a problem i could cause by downloading this type of thing wrongly? As yet i havent downloaded any drivers. I've asked on other forums but no luck as yet. Thanks for any help!

    Read the article

  • Apple, nouveau numéro 1 du marché des PC portables grâce à l'iPad devant HP et Acer, selon DisplaySearch

    Apple, nouveau numéro 1 du marché des PC portables grâce à l'iPad Devant HP et Acer, selon DisplaySearch Une étude de DisplaySearch montre que Apple est désormais le numéro 1 du marché des PC portables grâce à ses ventes d'iPad. Selon l'étude, la flambée des ventes des tablettes d'Apple au cours du quatrième trimestre de l'année 2010 a donné une part de marché mondiale de 17,2 % au constructeur. Au cours du quatrième trimestre, Apple aurait ainsi écoulé 10,2 millions d'unités de ses laptops et de ses tablettes. Soit près d'un million de plus que HP, qui occupe la seconde place avec 9,3 millions de terminaux vendus. Et 1,8 millions de plus que Acer, troisième avec 8,4 millio...

    Read the article

  • Apple, nouveau numéro 1 du marché des ordinateurs portables grâce à l'iPad devant HP et Acer, selon DisplaySearch

    Apple, nouveau numéro 1 du marché des ordinateurs portables grâce à l'iPad Devant HP et Acer, selon DisplaySearch Une étude de DisplaySearch montre que Apple est désormais le numéro 1 du marché des ordinateurs portables grâce à ses ventes d'iPad. Selon l'étude, la flambée des ventes des tablettes d'Apple au cours du quatrième trimestre de l'année 2010 a donné une part de marché mondiale de 17,2 % au constructeur. Au cours du quatrième trimestre, Apple aurait ainsi écoulé 10,2 millions d'unités de ses laptops et de ses tablettes. Soit près d'un million de plus que HP, qui occupe la seconde place avec 9,3 millions de terminaux vendus. Et 1,8 millions de plus que Acer, troisiè...

    Read the article

  • 11.10 had sound, 12.04 doesnt. Acer Aspire One D257

    - by Jeff Welling
    I'm wondering if anyone else has had this same problem, because if so it might be worth while for me to file a bug, but it might also be chaos monkey so I wanted to check first. I have an Acer Aspire One D257 and the sound worked in 11.10 by default, but after doing a fresh install of 12.04 there is no sound. There used to be a speaker icon on the menu bar but now there isn't, and volume up and volume down hotkeys now do nothing, which leads me to believe it isn't detecting the sound card properly anymore. Googling for sound problems on an Acer Aspire One D257 on 12.04 isn't showing any helpful results, so I'm wondering if it's just me. Does anyone have an AAO D257 on 12.04 with the sound working, and if so did you have to do anything special to make it work?

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >