Search Results

Search found 9590 results on 384 pages for 'core bluetooth'.

Page 11/384 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• How to use my computer as a Headset device for my phone with Bluetooth?

  - by TheJelly

  I want to extract the audio from my phone (the analog TV and FM/AM receiver mainly) and play it through my computer speakers. There is a headphone jack but it is of non-standard size (probably a micro-jack) and I do not have access to a shop that sells that kind of equipment in my area so doing this with Bluetooth is the only solution I can foresee. Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP (although it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer). I am currently using the latest version of the Toshiba stack, I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth (which is a Broadcom device) and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not work with both of my devices as they do not detect any Bluetooth devices when scanning. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Image: Device type selection http://i.stack.imgur.com/drjC6.jpg

  Read the article

• Problem with bluetooth on android 2.1 (samsung spica i5700) where pairing works but connection does

  - by user319634

  I have a Samsung Spica i5700 which I already have updated to Android 2.1. I am using the phone with an application called Run.GPS (http://www.rungps.net). This application logs data such as GPS position, route, speed, bearing etc. It can also log heartrate provided the user has a Zephyr HxM bluetooth heart rate monitor ("HxM"), which I do have. I can pair the HxM to the phone through the standard bluetooth utility. I'm prompted for the PIN, which I enter and the device is shown as 'Paired but not connected'. In the Run.GPS application itself, I click on 'Connect Heartrate Monitor'. This times out after about 30 seconds and the error message is 'Could not connect to heartrate monitor. Please try other settings'. I used a friend's HTC Windows Mobile as a control device to see if the HxM works there. It does. The Run.GPS application automatically sets the baud rate (initially to 9600 IIRC, though the connection also worked with higher baud rates) and it is possible to choose between various COM ports as well as a .Net COM port. I did some testing on my Spica Android, to try to find out why the bluetooth connection doesn't work. Below are some log files that I connected over adb when I clicked on 'Connect to Heartrate Monitor' in the Run.GPS application. I would be interested in any tips (including if I'm posting to the wrong forum here ;-)) - whether or not it's possible to experiment with the baud rate in Android etc. I still don't know if the problem is with the Run.GPS application (I've posted already on the development forum there) or with Android 2.1. I checked out another application - Endomondo - which is also a sport tracking application which supports heartrate monitor only with the HxM. There, what looked like exactly the same error occurred - I clicked on 'Connect Zephyr HxM'. For a few seconds I was shown the 'Connecting...' status, but then it timed out into 'Not Connected'. I'm thus tending towards looking at Android for the problem. Here's the output of adb logcat while trying to connect ./adb logcat | grep Run.GPS D/WYNEX> (11551): Excute :: Run.GPS Trainer UV, (null) E/Run.GPS (11997): Cannot connect to BT device E/Run.GPS (11997): java.io.IOException: Service discovery failed E/Run.GPS (11997): at android.bluetooth.BluetoothSocket$SdpHelper.doSdp(BluetoothSocket.java:374) E/Run.GPS (11997): at android.bluetooth.BluetoothSocket.connect(BluetoothSocket.java:184) E/Run.GPS (11997): at ju.a(Unknown Source) E/Run.GPS (11997): at qk.j(Unknown Source) E/Run.GPS (11997): at fs.c(Unknown Source) E/Run.GPS (11997): at le.a(Unknown Source) E/Run.GPS (11997): at s.b(Unknown Source) E/Run.GPS (11997): at pb.a(Unknown Source) E/Run.GPS (11997): at as.a(Unknown Source) E/Run.GPS (11997): at am.b(Unknown Source) E/Run.GPS (11997): at gf.onTouchEvent(Unknown Source) E/Run.GPS (11997): at android.view.View.dispatchTouchEvent(View.java:3709) E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1665) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1107) E/Run.GPS (11997): at android.app.Activity.dispatchTouchEvent(Activity.java:2061) E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1649) E/Run.GPS (11997): at android.view.ViewRoot.handleMessage(ViewRoot.java:1694) E/Run.GPS (11997): at android.os.Handler.dispatchMessage(Handler.java:99) E/Run.GPS (11997): at android.os.Looper.loop(Looper.java:123) E/Run.GPS (11997): at android.app.ActivityThread.main(ActivityThread.java:4363) E/Run.GPS (11997): at java.lang.reflect.Method.invokeNative(Native Method) E/Run.GPS (11997): at java.lang.reflect.Method.invoke(Method.java:521) E/Run.GPS (11997): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) E/Run.GPS (11997): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) E/Run.GPS (11997): at dalvik.system.NativeStart.main(Native Method) E/Run.GPS (11997): Cannot connect to BT device E/Run.GPS (11997): java.io.IOException: Service discovery failed Here's the output of dmesg while trying to connect the heartrate monitor <4>[74726.239833] select 11691 (.serviceModeApp), adj 15, size 3205, to kill <4>[74726.240741] select 11739 (com.wssnps), adj 15, size 3207, to kill <4>[74726.246870] select 11750 (id.partnersetup), adj 15, size 3219, to kill <4>[74726.253390] select 11857 (p.bluetoothicon), adj 15, size 3299, to kill <4>[74726.259879] select 13131 (ndroid.settings), adj 15, size 4586, to kill <4>[74726.266372] send sigkill to 13131 (ndroid.settings), adj 15, size 4586 <7>[74733.945097] [BT] GPIO_BT_WAKE = 1 <7>[74733.945121] [BT] wake_lock(bt_wake_lock) <7>[74733.951799] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74733.951822] [BT] wake_lock timeout = 5 sec <7>[74735.890196] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74736.150987] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74736.151009] [BT] wake_lock timeout = 5 sec <7>[74737.490185] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74740.073913] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74740.073948] [BT] wake_lock timeout = 5 sec <7>[74741.315336] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74743.249747] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74743.249768] [BT] wake_lock timeout = 5 sec <7>[74744.865099] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74745.154487] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74745.154509] [BT] wake_lock timeout = 5 sec <7>[74748.852534] [BT] GPIO_BT_HOST_WAKE = 0 <7>[74749.156256] [BT] GPIO_BT_HOST_WAKE = 1 <7>[74749.156278] [BT] wake_lock timeout = 5 sec <7>[74750.490018] [BT] GPIO_BT_HOST_WAKE = 0 <4>[74754.230424] select 11691 (.serviceModeApp), adj 15, size 3191, to kill <4>[74754.231326] select 11739 (com.wssnps), adj 15, size 3193, to kill <4>[74754.237473] select 11750 (id.partnersetup), adj 15, size 3205, to kill <4>[74754.243950] select 11857 (p.bluetoothicon), adj 15, size 3283, to kill <4>[74754.250452] select 13140 (com.svox.pico), adj 15, size 3465, to kill <4>[74754.256787] send sigkill to 13140 (com.svox.pico), adj 15, size 3465

  Read the article

• What is an intel I3 core?

  - by vaccano

  I know that a Dual Core is generally worse than a Core 2 Duo. Where does an I3 core fit into that? Does it have a dual core? Is it better or worse or just confusing?

  Read the article

• WTK emulator bluetooth connection problem

  - by Gokhan B.

  Hi! I'm developing a J2ME program with eclipse / WTK 2.5.2 and having problem with connecting two emulators using bluetooth. There is one server and one .client running on two different emulators. The problem is client program cannot discover any bluetooth device. Here is the server and client codes: public Server() { try { LocalDevice local = LocalDevice.getLocalDevice(); local.setDiscoverable(DiscoveryAgent.GIAC); server = (StreamConnectionNotifier) Connector.open("btspp://localhost:" + UUID_STRING + ";name=" + SERVICE_NAME); Util.Log("EchoServer() Server connector open!"); } catch (Exception e) {} } after calling Connector.open, I get following warning in console, which i believe is related: Warning: Unregistered device: unspecified and client code that searches for devices: public SearchForDevices(String uuid, String nm) { UUIDStr = uuid; srchServiceName = nm; try { LocalDevice local = LocalDevice.getLocalDevice(); agent = local.getDiscoveryAgent(); deviceList = new Vector(); agent.startInquiry(DiscoveryAgent.GIAC, this); // non-blocking } catch (Exception e) {} } system never calls deviceDiscovered, but calls inquiryCompleted() with INQUIRY_COMPLETED paramter, so I suppose client program runs fine. Bluetooth is enabled at emulator settings.. any ideas ?

  Read the article

• Error: 30509 -- Bluetooth not available iPad and iPhone GameKit stuff

  - by user347727

  When trying to connect the iPad to the iPhone via bluetooth it stays on the "Looking for other iPhones or iPod touches" screen on both. If i try running the iPhone version on both, they find each other. Is this some sort of restriction? Thanks. also, im getting: 2010-05-22 01:49:52.301 iPadTest[241:207] ********** Loading AX for: com.taptouchclick.iPadTest ************ 2010-05-22 01:49:58.366 iPadTest[241:207] BTM: attaching to BTServer Listening on port 49403 2010-05-22 01:49:58.480 iPadTest[241:207] Error: 30509 -- Bluetooth not available.. 2010-05-22 01:49:58.492 iPadTest[241:5403] handleEvents started (2) 2010-05-22 01:49:58.799 iPadTest[241:207] BTM: posting notification BluetoothAvailabilityChangedNotification 2010-05-22 01:49:59.120 iPadTest[241:5403] ~ DNSServiceRegister callback: Ref=180da0, Flags=2, ErrorType=0 name=00cb-qc0A..iPad regtype=_uv2nevk4u6n9m2._udp. domain=local. 2010-05-22 01:49:59.335 iPadTest[241:5403] ~ DNSServiceBrowse callback: Ref=180bb0, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 name=00cb-qc0A..iPad regtype=_uv2nevk4u6n9m2._udp. domain=local. 2010-05-22 01:50:29.201 iPadTest[241:5403] ~ DNSServiceBrowse callback: Ref=180bb0, Flags=0, IFIndex=2 (name=[en0]), ErrorType=0 name=00cb-qc0A..iPad regtype=_uv2nevk4u6n9m2._udp. domain=local. 2010-05-22 01:50:32.052 iPadTest[241:5403] ~ DNSServiceBrowse callback: Ref=180bb0, Flags=2, IFIndex=1 (name=[lo0]), ErrorType=0 name=00cb-qc0A..iPad regtype=_uv2nevk4u6n9m2._udp. domain=local. 2010-05-22 01:50:46.379 iPadTest[241:5403] ~ DNSServiceBrowse callback: Ref=180bb0, Flags=0, IFIndex=1 (name=[lo0]), ErrorType=0 name=00cb-qc0A..iPad regtype=_uv2nevk4u6n9m2._udp. domain=local. 2010-05-22 01:50:52.143 iPadTest[241:5403] ~ DNSServiceBrowse callback: Ref=180bb0, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 name=00cb-qc0A..iPad regtype=_uv2nevk4u6n9m2._udp. domain=local. in the console. not sure what that means, but "Error: 30509 -- Bluetooth not available.." scares me. ideas? Thanks, TapTouchClick

  Read the article

• Android Bluetooth syncing

  - by Darryl

  I am connecting to a bluetooth enabled camera, and I am able to connect using the methods found in the BluetoothChat example. I need to send commands to the camera. The issue is that I also need to get a response BACK from the camera after I send the command in the first place. So basically I need to write a command and receive a response. However, the thing is that the commands sometimes don't generate a response. Even the documentation on the camera says that you "have to send the sync command as many as 25 times on power up before you will get a response." So I cannot just write a command and wait for a response, as the "read" function blocks the thread. If I have the read function in another thread, like the bluetooth chat example, there seems to be sync issues, i.e., if I issue a write command, how can I know that it is reading if that is happening in another thread? I did set a global variable to check for, but this seems "iffy" at best. So basically I need to write to the bluetooth and then attempt to read from it. However, I need to let that read timeout and if I haven't received a response, I need to write again until I get a response (or until it's tried a set number of times). I don't need the read function to be going all the time in the background. Any ideas? Thanks in advance for your time.

  Read the article

• Problem deploying portlets on JBoss Portal 2.7.2: Not a canonical value

  - by Dee

  I just downloaded the JBoss Portal Server 2.7.2 (JBoss Portal + JBoss AS 4.2.3 bundle to be precise) and tried deploying portlets just as the SimpleHelloWorld provided in the samples. The portlet gets deployed fine but when I put it on a page I get the following exception. I tried adding other Portlets as well (such as the booking MVC portelt supplied with Spring WebFlow dist) but the same problem happens. The problem happens when the new instances are created by me, example when i create a new instance of CMS Portlet, I get the same error. If I use an existing instance it works. If I deploy a portlet that creates an instance using the "portle-instances.xml" then it works fine, but creating additional instances using the Admin and deploying them on page fails due to the following error. What am I doing wrong? Can anyone please help? javax.servlet.ServletException: java.lang.IllegalArgumentException: Not a canonical value SimplestHelloWorldWindow org.jboss.portal.server.servlet.PortalServlet.service(PortalServlet.java:278) javax.servlet.http.HttpServlet.service(HttpServlet.java:803) org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) root cause java.lang.IllegalArgumentException: Not a canonical value SimplestHelloWorldWindow org.jboss.portal.core.model.portal.PortalObjectPath$CanonicalFormat.parse(PortalObjectPath.java:357) org.jboss.portal.core.model.portal.PortalObjectPath.<init>(PortalObjectPath.java:161) org.jboss.portal.core.model.portal.PortalObjectPath.parse(PortalObjectPath.java:314) org.jboss.portal.core.model.portal.PortalObjectId.parse(PortalObjectId.java:158) org.jboss.portal.core.model.portal.PortalObjectId.parse(PortalObjectId.java:143) org.jboss.portal.core.model.portal.navstate.PortalObjectNavigationalStateContext.createWindowKey(PortalObjectNavigationalStateContext.java:299) org.jboss.portal.core.model.portal.navstate.PortalObjectNavigationalStateContext.getWindowNavigationalState(PortalObjectNavigationalStateContext.java:194) org.jboss.portal.core.controller.portlet.ControllerPageNavigationalState.getPortletWindowNavigationalState(ControllerPageNavigationalState.java:230) org.jboss.portal.core.model.portal.command.render.RenderWindowCommand.getPortletNavigationalState(RenderWindowCommand.java:121) org.jboss.portal.core.impl.model.content.InternalContentProvider.renderWindow(InternalContentProvider.java:211) org.jboss.portal.core.model.portal.command.render.RenderWindowCommand.execute(RenderWindowCommand.java:100) org.jboss.portal.core.controller.ControllerCommand$1.invoke(ControllerCommand.java:68) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:131) org.jboss.portal.core.aspects.controller.node.EventBroadcasterInterceptor.invoke(EventBroadcasterInterceptor.java:124) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.PageCustomizerInterceptor.invoke(PageCustomizerInterceptor.java:134) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.PolicyEnforcementInterceptor.invoke(PolicyEnforcementInterceptor.java:78) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.node.PortalNodeInterceptor.invoke(PortalNodeInterceptor.java:81) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.BackwardCompatibilityInterceptor.invoke(BackwardCompatibilityInterceptor.java:48) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.ControlInterceptor.invoke(ControlInterceptor.java:56) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.NavigationalStateInterceptor.invoke(NavigationalStateInterceptor.java:42) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.controller.ajax.AjaxInterceptor.invoke(AjaxInterceptor.java:55) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.ResourceAcquisitionInterceptor.invoke(ResourceAcquisitionInterceptor.java:50) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.common.invocation.Invocation.invoke(Invocation.java:157) org.jboss.portal.core.controller.ControllerContext.execute(ControllerContext.java:134) org.jboss.portal.core.model.portal.command.render.RenderWindowCommand.render(RenderWindowCommand.java:80) org.jboss.portal.core.model.portal.command.render.RenderPageCommand.execute(RenderPageCommand.java:222) org.jboss.portal.core.controller.ControllerCommand$1.invoke(ControllerCommand.java:68) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:131) org.jboss.portal.core.aspects.controller.node.EventBroadcasterInterceptor.invoke(EventBroadcasterInterceptor.java:124) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.PageCustomizerInterceptor.invoke(PageCustomizerInterceptor.java:134) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.PolicyEnforcementInterceptor.invoke(PolicyEnforcementInterceptor.java:78) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.node.PortalNodeInterceptor.invoke(PortalNodeInterceptor.java:81) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.BackwardCompatibilityInterceptor.invoke(BackwardCompatibilityInterceptor.java:48) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.ControlInterceptor.invoke(ControlInterceptor.java:56) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.NavigationalStateInterceptor.invoke(NavigationalStateInterceptor.java:42) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.controller.ajax.AjaxInterceptor.invoke(AjaxInterceptor.java:55) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.controller.ResourceAcquisitionInterceptor.invoke(ResourceAcquisitionInterceptor.java:50) org.jboss.portal.core.controller.ControllerInterceptor.invoke(ControllerInterceptor.java:40) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.common.invocation.Invocation.invoke(Invocation.java:157) org.jboss.portal.core.controller.ControllerContext.execute(ControllerContext.java:134) org.jboss.portal.core.model.portal.PortalObjectResponseHandler.processCommandResponse(PortalObjectResponseHandler.java:80) org.jboss.portal.core.controller.classic.ClassicResponseHandler.processHandlers(ClassicResponseHandler.java:78) org.jboss.portal.core.controller.classic.ClassicResponseHandler.processCommandResponse(ClassicResponseHandler.java:53) org.jboss.portal.core.controller.handler.ResponseHandlerSelector.processCommandResponse(ResponseHandlerSelector.java:70) org.jboss.portal.core.controller.Controller.processCommandResponse(Controller.java:315) org.jboss.portal.core.controller.Controller.processCommand(Controller.java:303) org.jboss.portal.core.controller.Controller.handle(Controller.java:261) org.jboss.portal.server.RequestControllerDispatcher.invoke(RequestControllerDispatcher.java:51) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:131) org.jboss.portal.core.cms.aspect.IdentityBindingInterceptor.invoke(IdentityBindingInterceptor.java:47) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.server.aspects.server.ContentTypeInterceptor.invoke(ContentTypeInterceptor.java:68) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.server.PortalContextPathInterceptor.invoke(PortalContextPathInterceptor.java:45) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.server.LocaleInterceptor.invoke(LocaleInterceptor.java:96) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.server.UserInterceptor.invoke(UserInterceptor.java:196) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.server.aspects.server.SignOutInterceptor.invoke(SignOutInterceptor.java:98) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.impl.api.user.UserEventBridgeTriggerInterceptor.invoke(UserEventBridgeTriggerInterceptor.java:65) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.server.IdentityCacheInterceptor.invoke(IdentityCacheInterceptor.java:68) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.core.aspects.server.TransactionInterceptor.org$jboss$portal$core$aspects$server$TransactionInterceptor$invoke$aop(TransactionInterceptor.java:49) org.jboss.portal.core.aspects.server.TransactionInterceptor$invoke_N5143606530999904530.invokeNext(TransactionInterceptor$invoke_N5143606530999904530.java) org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:79) org.jboss.aspects.tx.TxInterceptor$RequiresNew.invoke(TxInterceptor.java:253) org.jboss.portal.core.aspects.server.TransactionInterceptor$invoke_N5143606530999904530.invokeNext(TransactionInterceptor$invoke_N5143606530999904530.java) org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:79) org.jboss.aspects.tx.TxInterceptor$RequiresNew.invoke(TxInterceptor.java:262) org.jboss.portal.core.aspects.server.TransactionInterceptor$invoke_N5143606530999904530.invokeNext(TransactionInterceptor$invoke_N5143606530999904530.java) org.jboss.portal.core.aspects.server.TransactionInterceptor.invoke(TransactionInterceptor.java) org.jboss.portal.server.ServerInterceptor.invoke(ServerInterceptor.java:38) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.server.aspects.LockInterceptor$InternalLock.invoke(LockInterceptor.java:69) org.jboss.portal.server.aspects.LockInterceptor.invoke(LockInterceptor.java:130) org.jboss.portal.common.invocation.Invocation.invokeNext(Invocation.java:115) org.jboss.portal.common.invocation.Invocation.invoke(Invocation.java:157) org.jboss.portal.server.servlet.PortalServlet.service(PortalServlet.java:252) javax.servlet.http.HttpServlet.service(HttpServlet.java:803) org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)

  Read the article

• Best Practices - Core allocation

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

  Read the article

• Bluetooth connect to a RS232 adapter in android

  - by ThePosey

  Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77%5FCommands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine.

  Read the article

• C# bluetooth file send.

  - by cheesebunz

  i'm new to bluetooth development and i found the 32netfeet . Right now i'm able to search for bluetooth devices nearby and connect to them but how do i send a file e.g SendTest.txt? I tried buttonclick event using the OBEX but i don't understand this is my example code: using InTheHand.Net; using InTheHand.Net.Sockets; using InTheHand.Net.Bluetooth; namespace BluetoothIntheHand { public partial class Form2 : Form { private Guid service = BluetoothService.DialupNetworking; private BluetoothClient bluetoothClient; public Form2() { InitializeComponent(); } private void btnSearch_Click(object sender, EventArgs e) { BluetoothRadio.PrimaryRadio.Mode = RadioMode.Discoverable; BluetoothRadio myRadio = BluetoothRadio.PrimaryRadio; lblSearch.Text = "" + myRadio.LocalAddress.ToString(); bluetoothClient = new BluetoothClient(); Cursor.Current = Cursors.WaitCursor; BluetoothDeviceInfo[] bluetoothDeviceInfo = { }; bluetoothDeviceInfo = bluetoothClient.DiscoverDevices(10); comboBox1.DataSource = bluetoothDeviceInfo; comboBox1.DisplayMember = "DeviceName"; comboBox1.ValueMember = "DeviceAddress"; comboBox1.Focus(); Cursor.Current = Cursors.Default; } private void btnConnect_Click(object sender, EventArgs e) { if (comboBox1.SelectedValue != null) { try { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); MessageBox.Show("Connected"); } catch (Exception ex) { MessageBox.Show(ex.Message); } } } private void btnSend_Click(object sender, EventArgs e) { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); String addr = "112233445566"; Uri uri = new Uri("obex://"+@"SendTest.txt"); ObexWebRequest req= new ObexWebRequest(uri); ObexWebResponse rsp; } I found the guide but don't really knw hw to convert to C# ' The host part of the URI is the device address, e.g. IrDAAddress.ToString(), ' and the file part is the OBEX object name. Dim addr As String = "112233445566" Dim uri As New Uri("obex://" & addr & "/HelloWorld2.txt") Dim req As New ObexWebRequest(uri) Using content As Stream = req.GetRequestStream() ' Using a StreamWriter to write text to the stream... Using wtr As New StreamWriter(content) wtr.WriteLine("Hello World GetRequestStream") wtr.WriteLine("Hello World GetRequestStream 2") wtr.Flush() ' Set the Length header value req.ContentLength = content.Length End Using ' In this case closing the StreamWriter also closed the Stream, but ... End Using Dim rsp As ObexWebResponse = CType(req.GetResponse(),ObexWebResponse) Console.WriteLine("Response Code: {0} (0x{0:X})", rsp.StatusCode)

  Read the article

• bluetooth file send.

  - by cheesebunz

  i'm new to bluetooth development and i found the 32netfeet . Right now i'm able to search for bluetooth devices nearby and connect to them but how do i send a file e.g SendTest.txt? I tried buttonclick event using the OBEX but i don't understand this is my example code: using InTheHand.Net; using InTheHand.Net.Sockets; using InTheHand.Net.Bluetooth; namespace BluetoothIntheHand { public partial class Form2 : Form { private Guid service = BluetoothService.DialupNetworking; private BluetoothClient bluetoothClient; public Form2() { InitializeComponent(); } private void btnSearch_Click(object sender, EventArgs e) { BluetoothRadio.PrimaryRadio.Mode = RadioMode.Discoverable; BluetoothRadio myRadio = BluetoothRadio.PrimaryRadio; lblSearch.Text = "" + myRadio.LocalAddress.ToString(); bluetoothClient = new BluetoothClient(); Cursor.Current = Cursors.WaitCursor; BluetoothDeviceInfo[] bluetoothDeviceInfo = { }; bluetoothDeviceInfo = bluetoothClient.DiscoverDevices(10); comboBox1.DataSource = bluetoothDeviceInfo; comboBox1.DisplayMember = "DeviceName"; comboBox1.ValueMember = "DeviceAddress"; comboBox1.Focus(); Cursor.Current = Cursors.Default; } private void btnConnect_Click(object sender, EventArgs e) { if (comboBox1.SelectedValue != null) { try { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); MessageBox.Show("Connected"); } catch (Exception ex) { MessageBox.Show(ex.Message); } } } private void btnSend_Click(object sender, EventArgs e) { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); String addr = "112233445566"; Uri uri = new Uri("obex://"+@"SendTest.txt"); ObexWebRequest req= new ObexWebRequest(uri); ObexWebResponse rsp; } I found the guide but don't really know how to convert to C# ' The host part of the URI is the device address, e.g. IrDAAddress.ToString(), ' and the file part is the OBEX object name. Dim addr As String = "112233445566" Dim uri As New Uri("obex://" & addr & "/HelloWorld2.txt") Dim req As New ObexWebRequest(uri) Using content As Stream = req.GetRequestStream() ' Using a StreamWriter to write text to the stream... Using wtr As New StreamWriter(content) wtr.WriteLine("Hello World GetRequestStream") wtr.WriteLine("Hello World GetRequestStream 2") wtr.Flush() ' Set the Length header value req.ContentLength = content.Length End Using ' In this case closing the StreamWriter also closed the Stream, but ... End Using Dim rsp As ObexWebResponse = CType(req.GetResponse(),ObexWebResponse) Console.WriteLine("Response Code: {0} (0x{0:X})", rsp.StatusCode)

  Read the article

• RSSI for Bluetooth

  - by Goldsmith

  Can any one help me to write code for RSSI in Bluetooth. any tool and techniques used for this to find it easily

  Read the article

• Broadcast-style Bluetooth using Sockets on the iPhone?

  - by Kyle

  Is there any way to open a broadcast bluetooth socket, take a listen and send replies? I want a proper peer to peer system where I broadcast and listen for broadcasts in an area. That way, variable clients can mingle. Is this possible? My theory is this: If GameKit can sit around wasting 25 seconds of the users time whilst having access to a broadcast socket, can't I? Or, must I be in kernel mode for such access? I'm not really sure where the proper bluetooth headers are as well. Thanks for reading!

  Read the article

• Creating Service with Bluetooth activation in Android

  - by Mr. Kakakuwa Bird

  Hi I want to create a service in Android which will initially ask user if they want to start Bluetooth and set the Bluetooth discovery. My question is 1) Can I launch in the service following activities? if (!mBluetoothAdapter.isEnabled()) { Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE); startActivityForResult(enableBtIntent, 0); } // Set Phone Discoverable for 300 seconds. Intent discoverableIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_DISCOVERABLE); discoverableIntent.putExtra(BluetoothAdapter.EXTRA_DISCOVERABLE_DURATION, 600); startActivity(discoverableIntent); 2) I want to set discoverabilty of the phone on for lifetime of application. Is it possible? 3) I want to access empty space available on SD card. How should i do it? Thanks in advance.

  Read the article

• Mac OS X bluetooth programming sample ?

  - by tuttu47

  Hi, I am trying to develop an application using bluetooth in my MAC mini. However, after searching all over net, all that I could find was the "Bluetooth Device Access Guide" from apple, and not a single sample program ! Is any sample code for this available ? I will also explain what I am trying to do in my program, so that if any of you can help me.... I want pair my iPhone with my MAC programmatically over the PAN profile, and then send data (streams) both-ways. I paired them manually, and I was successfully able to transfer data. I just want to do that programmatically ! Any help would be appreciated ...

  Read the article

• Android bluetooth socket error

  - by ashwini

  I am using backport bluetooth api on android 1.6. I am using Google Bluetooth Chat sample app for testing. The app works fine in normal scenarios. In a scenario, when I try to connect to paired device which is in off state, I get following error. 01-04 09:00:11.629: ERROR/BluetoothEventLoop.cpp(84): onGetRemoteServiceChannelResult: D-Bus error: org.bluez.Error.ConnectionAttemptFailed (Host is down) 01-04 09:00:11.729: DEBUG/dalvikvm(128): GC freed 4535 objects / 256008 bytes in 296ms 01-04 09:00:21.880: ERROR/bluetooth_RfcommSocket.cpp(1433): connect error: Host is down (112) But it sets the state as connected. The app is unable to catch the exception. Why does it happen? Or is it the case with backport api? Any help is appreciated as I am struggling a lot to get things run fine.

  Read the article

• controlling bluetooth connection in matlab

  - by Mehreen Shahid

  we have a project in which we have to pick randomly generated numbers from a remote device, say mobile. there is a simple java application to generate numbers. next, we have to recieve those numbers in our matlab program via bluetooth connection with the device. assuming those numbers are temperature readings, we want to recieve a new number after every 10 sec and display the number on our matlab GUI program. the problem is do we implement bluetooth protocol through our programming? or use the matlab templates? because otherwise whenever we want to transfer file from a mobile to computer, we have to manually click "recieve a file" in blutooth wizard , just like we normally do to transfer a file. we want to enable the connection once, and then recieve text files after every 10 seconds to be read in our matlab program. can anyone please tell is it even possible in matlab? if yes, how do we establish such an automatic real time connection?

  Read the article

• does windows 7 bluetooth stack and API support connection of headsets

  - by markh44

  We need to write code to search for, pair and connect to a bluetooth headset with Windows 7 Embedded. Once connected the headset will be used as a normal windows audio device. We fully control what software is installed on the system so conflicting stacks and similar concerns are not a problem. We would however like to minimize as far as possible installing extra software such as 3rd party stacks. Therefore my question is: can the built in windows 7 bluetooth stack and C++ API alone be used to create the functionality we need?

  Read the article

• Adapting Android Bluetooth Chat for multiple devices

  - by Megh

  Hello, I'm doing a college project on Bluetooth for Android, and I'm trying to understand how to manage communication between multiple connected devices. Eventually I'm going to develop a multiplayer Bluetooth Game. Currently I've adapted Android's sample app BluetoothChat to connect my three Nexxus One phones. 1 connects to 2 who connects to 3 1 sends its messages successfully to 2. 3 sends its messages successfully to 2 as well. 2 can send its messages successfully to 1 and 3, as it shares a ConnectedThread with both. But I can't figure out how to handle getting communication from 1 to 3. Does anyone have any examples of communication between multiple devices or has done this themselves? Thanks

  Read the article

• Regular non-low energy bluetooth for IOS

  - by user3712524

  Ok, so I can't get my app to connect with a peripheral using bluetooth low-energy(my app is installed on an iPhone 5s and I have LightBlue installed on an iPhone 4S, simulating a peripheral. I also have light blue installed on the 5s, simulating a central, to verify that the two can connect and they do.) I have verified that the centralManager is instantiating and the State is powered on. So, my question is, is regular bluetooth still a viable option? Can I just use the GameKit API and go that route? Thanks in advance!

  Read the article

• Disable Bluetooth discoverable mode on Android

  - by Venator85

  Hi, I found in the Android documentation how to turn Bluetooth discoverability mode on: Intent discoverableIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_DISCOVERABLE); discoverableIntent.putExtra(BluetoothAdapter.EXTRA_DISCOVERABLE_DURATION, 300); startActivity(discoverableIntent); This will make the device discoverable for 300 seconds (documentation). My question is: how to turn discoverability OFF before this timeout occurs? I'd like to replicate the corresponding setting in Settings|Wireless and networks|Bluetooth settings applet, that allows discoverability to be turned on and off with a click. Any help? Thanks ;)

  Read the article

• Broadcast message or file to nearby Bluetooth devices

  - by Medjeti

  Hiya, A client of ours is attending a business fair and would like to push some sort of "welcome message" to people visiting their space. I'm not too familiar with Bluetooth, so I have a few questions: What kind of content can you transfer via Bluetooth? (Is it files only or is it possible to send a simple text message?) Is it possible to push content only to recipients within a certain distance? (ie. based on signal strength or similar) Can anybody recommend a piece of software that can do some or all of the above? If necessary we could program a custom solution ourselves (.NET), but I'm sure there must be a program out there that can do the job. I've googled a bit and came across the 32feet.NET framework - does anybody have any experience with this framework? Thanks in advance for any suggestions!

  Read the article

• Using Solaris pkg to list all setuid or setgid programs

  - by darrenm

  $ pkg contents -a mode=4??? -a mode=2??? -t file -o pkg.name,path,mode We can also add a package name on the end to restrict it to just that single package eg: $ pkg contents -a mode=4??? -a mode=2??? -t file -o pkg.name,path,mode core-os PKG.NAME PATH MODE system/core-os usr/bin/amd64/newtask 4555 system/core-os usr/bin/amd64/uptime 4555 system/core-os usr/bin/at 4755 system/core-os usr/bin/atq 4755 system/core-os usr/bin/atrm 4755 system/core-os usr/bin/crontab 4555 system/core-os usr/bin/mail 2511 system/core-os usr/bin/mailx 2511 system/core-os usr/bin/newgrp 4755 system/core-os usr/bin/pfedit 4755 system/core-os usr/bin/su 4555 system/core-os usr/bin/tip 4511 system/core-os usr/bin/write 2555 system/core-os usr/lib/utmp_update 4555 system/core-os usr/sbin/amd64/prtconf 2555 system/core-os usr/sbin/amd64/swap 2555 system/core-os usr/sbin/amd64/sysdef 2555 system/core-os usr/sbin/amd64/whodo 4555 system/core-os usr/sbin/prtdiag 2755 system/core-os usr/sbin/quota 4555 system/core-os usr/sbin/wall 2555

  Read the article

• How to use bluetooth keyboard with both Android and WIndows 8?

  - by mathStudent

  I purchased this Logitech bluetooth keyboard which, according to the specifications on the page, can switch between both Android and Windows 8 devices. I haven't figured out how to do this. Is a specific type of bluetooth USB adapter required? And even assuming I had the necessary USB adapter, what commands must be executed (on the keyboard, Android, or Windows 8 machines) for the bluetooth keyboard to switch between devices?

  Read the article

• Connecting Android device to multiple Bluetooth serial embedded peers

  - by TacB0sS

  I'm trying to find a solution for this setup: I have a single Android device, which I would like to connect to multiple serial embedded devices... And here is the thing, using the "Normal" way to retrieve the Bluetooth socket, doesn't work on all devices, and while it does, I can connect to multiple devices, and send and receive data to and from multiple devices. public final synchronized void connect() throws ConnectionException { if (socket != null) throw new IllegalStateException("Error socket is not null!!"); connecting = true; lastException = null; lastPacket = null; lastHeartBeatReceivedAt = 0; log.setLength(0); try { socket = fetchBT_Socket_Normal(); connectToSocket(socket); listenForIncomingSPP_Packets(); connecting = false; return; } catch (Exception e) { socket = null; logError(e); } try { socket = fetchBT_Socket_Workaround(); connectToSocket(socket); listenForIncomingSPP_Packets(); connecting = false; return; } catch (Exception e) { socket = null; logError(e); } connecting = false; if (socket == null) throw new ConnectionException("Error creating RFcomm socket for" + this); } private BluetoothSocket fetchBT_Socket_Normal() throws Exception { /* The getType() is a hex 0xXXXX value agreed between peers --- this is the key (in my case) to multiple connections in the "Normal" way */ String uuid = getType() + "1101-0000-1000-8000-00805F9B34FB"; try { logDebug("Fetching BT RFcomm Socket standard for UUID: " + uuid + "..."); socket = btDevice.createRfcommSocketToServiceRecord(UUID.fromString(uuid)); return socket; } catch (Exception e) { logError(e); throw e; } } private BluetoothSocket fetchBT_Socket_Workaround() throws Exception { Method m; int connectionIndex = 1; try { logDebug("Fetching BT RFcomm Socket workaround index " + connectionIndex + "..."); m = btDevice.getClass().getMethod("createRfcommSocket", new Class[]{int.class}); socket = (BluetoothSocket) m.invoke(btDevice, connectionIndex); return socket; } catch (Exception e1) { logError(e1); throw e1; } } private void connectToSocket(BluetoothSocket socket) throws ConnectionException { try { socket.connect(); } catch (IOException e) { try { socket.close(); } catch (IOException e1) { logError("Error while closing socket", e1); } finally { socket = null; } throw new ConnectionException("Error connecting to socket with" + this, e); } } And here is the thing, while on phones which the "Normal" way doesn't work, the "Workaround" way provides a solution for a single connection. I've searched far and wide, but came up with zip. The problem with the workaround is mentioned in the last link, both connection uses the same port, which in my case, causes a block, where both of the embedded devices can actually send data, that is not been processed on the Android, while both embedded devices can receive data sent from the Android. Did anyone handle this before? There is a bit more reference here, UPDATE: Following this (that I posted earlier) I wanted to give the mPort a chance, and perhaps to see other port indices, and how other devices manage them, and I found out the the fields in the BluetoothSocket object are different while it is the same class FQN in both cases: Detils from an HTC Vivid 2.3.4, uses the "workaround" Technic: The Socket class type is: [android.bluetooth.BluetoothSocket] mSocket BluetoothSocket (id=830008629928) EADDRINUSE 98 EBADFD 77 MAX_RFCOMM_CHANNEL 30 TAG "BluetoothSocket" (id=830002722432) TYPE_L2CAP 3 TYPE_RFCOMM 1 TYPE_SCO 2 mAddress "64:9C:8E:DC:56:9A" (id=830008516328) mAuth true mClosed false mClosing AtomicBoolean (id=830007851600) mDevice BluetoothDevice (id=830007854256) mEncrypt true mInputStream BluetoothInputStream (id=830008688856) mLock ReentrantReadWriteLock (id=830008629992) mOutputStream BluetoothOutputStream (id=830008430536) **mPort 1** mSdp null mSocketData 3923880 mType 1 Detils from an LG-P925 2.2.2, uses the "normal" Technic: The Socket class type is: [android.bluetooth.BluetoothSocket] mSocket BluetoothSocket (id=830105532880) EADDRINUSE 98 EBADFD 77 MAX_RFCOMM_CHANNEL 30 TAG "BluetoothSocket" (id=830002668088) TYPE_L2CAP 3 TYPE_RFCOMM 1 TYPE_SCO 2 mAccepted false mAddress "64:9C:8E:B9:3F:77" (id=830105544600) mAuth true mClosed false mConnected ConditionVariable (id=830105533144) mDevice BluetoothDevice (id=830105349488) mEncrypt true mInputStream BluetoothInputStream (id=830105532952) mLock ReentrantReadWriteLock (id=830105532984) mOutputStream BluetoothOutputStream (id=830105532968) mPortName "" (id=830002606256) mSocketData 0 mSppPort BluetoothSppPort (id=830105533160) mType 1 mUuid ParcelUuid (id=830105714176) Anyone have some insight...

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >