Search Results

Search found 804 results on 33 pages for 'dylan wan'.

Page 11/33 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • management network to a network port for additional ones munin and monit

    - by paolo
    management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

    Read the article

  • Changing Corosync/Heartbeat pair's active node based on MySQL/Galera cluster state

    - by Hace
    Background I'm planning on building a High Availability "cluster" for our Zabbix instance by placing two physical servers in one server room and two in another server room. In each server room one of the physical servers will run Zabbix on RHEL and the other will run Zabbix's MySQL database, also on RHEL. I'd prefer synchronous replication for the MySQL nodes so I'm planning on using Galera in a master-slave configuration. The Zabbix instances on the two Zabbix servers would be controlled by Heartbeat/Corosync (although Red Hat Cluster Suite is also an option...) If the Zabbix server in Server Room A goes down, the one in Server Room B becomes active (and vice versa). Ditto for the MySQL servers/instances. If either of those cases happen, however, the connection between the Zabbix server and the MySQL server becomes significantly slower as ti has to travel over WAN. Question Is it possible to configure the Heartbeat/CoroSync pair to instruct the MySQL/Galera cluster to change the master node to switch to (if available) the one that's in the server room as the active Heartbeat/Corosync -node and (more challengingly) is it possible to do the same in the other direction, i.e have the Galera cluster change the active Heartbeat/CoroSync server to be in the same room as the active MySQL master server in case of a failover in over to avoid unnecessary WAN transfers between the application and its DB? Theories Most likely I can get CoroSync to run something that'd log in to one of the DB nodes to change the MySQL/Galera master but I don't know if it's really possible to do anything similar in the other direction in Galera. Is it possible to define a "service" in CoroSync/Heartbeat so that both the service and its MySQL service would migrate as one if possible. Using the DB server that's behind WAN should still be a better option to DB downtime. Am I just using too many tools to solve a problem that'd be far simpler with something else?

    Read the article

  • pfSense Load Balancer and Virtual IP

    - by jshin47
    I have two identical web servers on 10.2.1.13 and 10.2.1.113. I would like to set up pfSense load balancer to balance requests to both of these. I set up pools that included HTTP and HTTPS for both of these hosts, then set up virtual servers that responded on HTTP and HTTPS and referred traffic to its respective pool. However, I set up the virtual server to listen on 10.2.1.213, a LAN IP rather than a WAN IP, because I want LAN traffic to be able use the load balancer virtual server as well. So, I set up a Virtual IP for 10.2.1.213 on LAN IP, and a NAT port forwarding rule for HTTP and HTTPS traffic on a WAN IP to forward to 10.2.1.213. It seems like this should work, but it fails. What eventually happens is that when I try to access the page from WAN, I am directed to the login page for my pfSense device rather than the page I am expecting. When I try to access 10.2.1.213 from LAN, the request times out. What is going wrong here? I have tried it with and without NAT reflection to no avail. Please advise

    Read the article

  • Why does my DD-WRT not accept SSH connections from my laptop?

    - by Vlad Seghete
    So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

    Read the article

  • Tomato/DD-WRT router to act as switch & only NAT some port

    - by fseto
    BACKGROUND: I have a device that must use a real IP address. Currently, my ISP uses DHCP and I can have up to 4 real IP address assigned. However, the cable modem only have 1 ethernet port and it's connected to my router (running Tomato, but can run DD-wrt or other Openwrt if required). Question stems from how I can connect the additional device, requiring a real IP? EASY SOLUTION: would be to get a switch and connect to the CM, Router, and Device. But alas, I want to avoid this route, since: my wiring cabinet in my home is drawing lots of power and heat already Device will be unprotected by any firewall unable to monitor the traffic to/from device. Besides, what would be the FUN in that? =) IDEA: So what I want to do is to configure the router, so that one of the switchport is removed from the normal br0 bridge. Instead, I want to make it behave like a switch on the WAN port. What's the best way of doing this? Should I create another bridge on the WAN & the device port? Can a single port belongs to two bridges? or would I need to create a subinterface first? Would I need a DHCP-relay? Am I expecting too much from my poor cheapie router? +------+ | CM | +--++--+ || +----WAN---------------+ | / \ Router | | BR1? BR0 | | | \ | | | {NAT} | | | / | | \ | +-P0----P1-P2-P3-Wifi--+ | +------+ |Device| +------+

    Read the article

  • sbs-server with 2 nics and 2 connections to the internet with different providers not working as it

    - by erik-van-gorp
    We have the following configuration : A sbs-2003 server in a domain (mydomain.com) with 2 network cards, each connected to a different network (provider), with different gateways, one for web and one for mail and clients. (we do this because the bandwitdh we get from our providers is too small to handle all the mail(+spam) traffic and webservices, so we took 2 providers) DNS is as follows : www.mydomain.com 1.2.3.4 mail.mydomain.com 5.6.7.8 NIC 1(192.168.1.3) is connected to to the internet through a firewall at 192.168.1.1, having wan address 1.2.3.4 NIC 2(10.0.0.3) is connected to to the internet through a firewall at 10.0.0.1, having wan address 5.6.7.8 Both nics have their default gateway installed at their corresponding routers. Also the metrics are set equal. (i know this isn't a supported config, but it works more or less). In this configuration i can use RDP on both wan adresses, and telnet to port 25 works as well on both. The issue now is that since a few weeks , we get regular disconnections, and website hickups(timeouts), several per hour. If we set one router to a higher metric, that route no longer works. In short, I want the mails to route through NIC2 and the web through NIC1. Any better configuration (without installing a second mail server) ?

    Read the article

  • Iptables - forward email ports?

    - by Emmet Brown
    im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

    Read the article

  • Google I/O 2012 - What's New in Google Maps

    Google I/O 2012 - What's New in Google Maps Brian McClendon, Dylan Lorimer, Thor Mitchell There is a lot of exciting things happening in the world of Maps at Google. Come and join us as we kick off the Maps track at Google I/O 2012 with a dive into the cutting edge of online maps with Google's Vice President of Google Maps and Earth, Brian McClendon, For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 4780 54 ratings Time: 51:32 More in Science & Technology

    Read the article

  • Microsoft.Web.Administration.ServerManager can't read config sections containing encrypted passwords

    - by Dylan Beattie
    I have some sites in IIS7 that are configured to run as domain users (MYDOMAIN\someuser). I'm using the Microsoft.Web.Administration namespace to scan my server configuration, but it's throwing an exception when I hit one of these "impersonator" sites: using (ServerManager sm = new ServerManager()) { foreach (Site site in sm.Sites) { foreach (Application app in site.Applications.Reverse()) { foreach (VirtualDirectory vdir in app.VirtualDirectories.Reverse()) { var config = app.GetWebConfiguration(); foreach (var locationPath in config.GetLocationPaths()) { // error occurs in GetLocationPaths() } } } } } The actual error message is: COMException was unhandled Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config Line number: 279 Error: Failed to decrypt attribute 'password' because the keyset does not exist It appears that IIS is storing the MYDOMAIN\someuser password encrypted in applicationHost.config, which is great in terms of security - but I have no idea how to get the ServerManager to decrypt this. Any tips on how I can either allow ServerManager to decrypt this, or just tell IIS to store the passwords in plain text? This is on IIS7 under Windows 7 RC, by the way.

    Read the article

  • OAuth with Google Reader API using Objective C

    - by Dylan
    I'm using the gdata OAuth controllers to get an OAuth token and then signing my requests as instructed. [auth authorizeRequest:myNSURLMutableRequest] It works great for GET requests but POSTs are failing with 401 errors. I knew I wouldn't be able to remain blissfully ignorant of the OAuth magic. The Google Reader API requires parameters in the POST body. OAuth requires those parameters to be encoded in the signature like they were on the query string. It doesn't appear the gdata library does this. I tried hacking it in the same way it handles the query string but no luck. This is so difficult to debug as all I get is a 401 from the Google black box and I'm left to guess. I really want to use OAuth so I don't have to collect login credentials from my users but I'm about to scrap it and go with the simpler cookie based authentication that is more mature. It's possible I'm completely wrong about the reason it's failing. This is my best guess. Any suggestions for getting gdata to work or maybe an alternative iphone friendly OAuth library?

    Read the article

  • iPhone - archiving array of custom objects

    - by Dylan
    I've been trying for hours and I cannot solve this problem. I'm making an app that saves unfinished Chess Games, so I'm trying to write an array to a file. This is what the array is, if it makes sense: -NSMutableArray savedGames --GameSave a ---NSMutableArray board; ----Piece a, b, c, etc. -----some ints ---NSString whitePlayer, blackPlayer; ---int playerOnTop, turn; --GameSave b ---NSMutableArray board; ----Piece a, b, c, etc. -----some ints ---NSString whitePlayer, blackPlayer; ---int playerOnTop, turn; etc. And these are my NSCoding methods: GameSave.m - (void)encodeWithCoder:(NSCoder *)coder { [coder encodeObject:whitePlayer forKey:@"whitePlayer"]; [coder encodeObject:blackPlayer forKey:@"blackPlayer"]; [coder encodeInt:playerOnTop forKey:@"playerOnTop"]; [coder encodeInt:turn forKey:@"turn"]; [coder encodeObject:board forKey:@"board"]; } - (id)initWithCoder:(NSCoder *)coder { self = [[GameSave alloc] init]; if (self != nil) { board = [coder decodeObjectForKey:@"board"]; whitePlayer = [coder decodeObjectForKey:@"whitePlayer"]; blackPlayer = [coder decodeObjectForKey:@"blackPlayer"]; playerOnTop = [coder decodeIntForKey:@"playerOnTop"]; turn = [coder decodeIntForKey:@"turn"]; } return self; } Piece.m - (void)encodeWithCoder:(NSCoder *)coder { [coder encodeInt:color forKey:@"color"]; [coder encodeInt:piece forKey:@"piece"]; [coder encodeInt:row forKey:@"row"]; [coder encodeInt:column forKey:@"column"]; } - (id)initWithCoder:(NSCoder *)coder { self = [[Piece alloc] init]; if (self != nil) { color = [coder decodeIntForKey:@"color"]; piece = [coder decodeIntForKey:@"piece"]; row = [coder decodeIntForKey:@"row"]; column = [coder decodeIntForKey:@"column"]; } return self; } And this is the code that tries to archive and save to file: - (void)saveGame { ChessSaverAppDelegate *delegate = (ChessSaverAppDelegate *) [[UIApplication sharedApplication] delegate]; [[delegate gameSave] setBoard:board]; NSMutableArray *savedGames = [NSKeyedUnarchiver unarchiveObjectWithFile:[self dataFilePath]]; if (savedGames == nil) { [NSKeyedArchiver archiveRootObject:[delegate gameSave] toFile:[self dataFilePath]]; } else { [savedGames addObject:[delegate gameSave]]; [NSKeyedArchiver archiveRootObject:savedGames toFile:[self dataFilePath]]; } } - (NSString *)dataFilePath { NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; return [documentsDirectory stringByAppendingPathComponent:@"gameSaves.plist"]; } Sorry, here's the problem: After setting some breakpoints, an error is reached after this line from -saveGame: [NSKeyedArchiver archiveRootObject:savedGames toFile:[self dataFilePath]]; And this is what shows up in the console: 2010-05-11 17:04:08.852 ChessSaver[62065:207] *** -[NSCFType encodeWithCoder:]: unrecognized selector sent to instance 0x3d3cd30 2010-05-11 17:04:08.891 ChessSaver[62065:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFType encodeWithCoder:]: unrecognized selector sent to instance 0x3d3cd30' 2010-05-11 17:04:08.908 ChessSaver[62065:207] Stack: ( 32339035, 31077641, 32720955, 32290422, 32143042, 238843, 25827, 238843, 564412, 342037, 238843, 606848, 17686, 2733061, 4646817, 2733061, 3140430, 3149167, 3144379, 2837983, 2746312, 2773089, 41684313, 32123776, 32119880, 41678357, 41678554, 2777007, 9884, 9738 ) If it matters, -saveGame is called from a UIBarButton in a navigation controller. Any help is appreciated, thanks.

    Read the article

  • Best practice for Python & Django constants

    - by Dylan Klomparens
    I have a Django model that relies on a tuple. I'm wondering what the best practice is for refering to constants within that tuple for my Django program. Here, for example, I'd like to specify "default=0" as something that is more readable and does not require commenting. Any suggestions? Status = ( (-1, 'Cancelled'), (0, 'Requires attention'), (1, 'Work in progress'), (2, 'Complete'), ) class Task(models.Model): status = models.IntegerField(choices=Status, default=0) # Status is 'Requires attention' (0) by default. EDIT: If possible I'd like to avoid using a number altogether. Somehow using the string 'Requires attention' instead would be more readable.

    Read the article

  • UIResponder Delays

    - by Dylan Copeland
    I have a UIView subclass that overrides UIResponder's touchesMoved: message. I've noticed that when I swipe my finger very quickly across the UIView, my touchesMoved: message only gets called every so often and not constantly getting messaged. Any ideas? Thanks.

    Read the article

  • ASP.NET HttpContext.GetLocalResourceObject() throws InvalidOperationException

    - by Dylan Lin
    Hi all, Let's say we have such site structure: App_LocalResources       |- A.aspx.resx       |- B.aspx.resx A.aspx B.aspx Now I use HttpContext.GetLocalResourceObject("~/A.aspx") in A.aspx.cs, and it works fine. But if I use HttpContext.GetLocalResourceObject("~/A.aspx") in B.aspx.cs, it throws an exception: The resource class for this page was not found. Please check if the resource file exists and try again. Exception Details: System.InvalidOperationException: The resource class for this page was not found. Please check if the resource file exists and try again. How can I resolve this problem? I want to read the local resources from an external page, and I don't want to read the .resx file myself. Thanks :-)

    Read the article

  • IEnumerable.GetEnumerator() and IEnumerable<T>.GetEnumerator()

    - by Dylan Lin
    Hi, In the .net framework, there's a generic IEnumerable<T> interface which inherits from the not-generic IEnumerable, and they both have a GetEnumerator() method. The only differents between these two GetEnumerator() is the return type. Now I have a similar design, but when I compile the code, the compiler said: MyInterface<T>.GetItem()' hides inherited member 'MyInterface.GetItem()'. Use the new keyword if hiding was intended. The MyInterface<T>.GetItem() returns a concrete type T, while MyInterface.GetItem() returns type System.Object. So I think if the BCL team guys compile the .net framework, they will get the same warning. I think having compiler warnings is not good, what do you think? And how can I solve this problem? I mean I want to get the concrete type T when calling the MyInterface<T>.GetItem() not just a instance of type System.Object. Thanks in advance! :-)

    Read the article

  • Twitter Substring Searches

    - by Dylan
    If there is a way to do this, it should be a fairly straightforward question. Using the twitter search api, is there a way to return results that contain a part of the word (searching "#dog" would return "#dogs" as-well)? Thanks

    Read the article

  • How to suppress a compiler warning in C# without using #pragma ?

    - by Dylan Lin
    Hi, I need to suppress a specfic compiler warning in C#. Now I can do it like this: #pragma warning disable 0649 private string _field; #pragma warning restore 0649 Is there a way to do it like the following? [SuppressCompilerWarning("0649")] private string _field; Because I only need to suppress warnings for this field, not a code block. Note: I want to suppress the compiler warning, not the Code-Analysis warning. Thanks!

    Read the article

  • Microsoft.Web.Administration.ServerManager can't read config sections containing encrypted passwords in applicationHost.config

    - by Dylan Beattie
    I have some sites in IIS7 that are configured to run as domain users (MYDOMAIN\someuser). I'm using the Microsoft.Web.Administration namespace to scan my server configuration, but it's throwing an exception when I hit one of these "impersonator" sites: using (ServerManager sm = new ServerManager()) { foreach (Site site in sm.Sites) { foreach (Application app in site.Applications.Reverse()) { foreach (VirtualDirectory vdir in app.VirtualDirectories.Reverse()) { var config = app.GetWebConfiguration(); foreach (var locationPath in config.GetLocationPaths()) { // error occurs in GetLocationPaths() } } } } } The actual error message is: COMException was unhandled Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config Line number: 279 Error: Failed to decrypt attribute 'password' because the keyset does not exist It appears that IIS is storing the MYDOMAIN\someuser password encrypted in applicationHost.config, which is great in terms of security - but I have no idea how to get the ServerManager to decrypt this. Any tips on how I can either allow ServerManager to decrypt this, or just tell IIS to store the passwords in plain text? This is on IIS7 under Windows 7 RC, by the way.

    Read the article

  • Namespace Orginization and Conventions

    - by Bob Dylan
    So I have a little bit of a problem. I working on a project in C# using The StackOveflow API. You can send it a request like so: http://stackoverflow.com/users/rep/126196/2010-01-01/2010-03-13 And get back something like this JSON response: [{"PostUrl":"1167342", "PostTitle":"Are ref and out in C# the same a pointers in C++?", "Rep":10}, {"PostUrl":"1290595", "PostTitle":"Where can I find a good tutorial on bubbling?", "Rep":10} ... So my problem is that I have some methods like GetJsonResponse() which return the above JSON and SaveTempFile() which saves that JSON response to a temporary file for later use. I not sure if I should create a class for them, or what namespace to put them under. Right now my current namespace hierarchy is like so: StackOverflow.Api.Json. So how should I organize these methods/classes/namespaces?

    Read the article

  • Jumbled byte array after using TcpClient and TcpListener

    - by Dylan
    I want to use the TcpClient and TcpListener to send an mp3 file over a network. I implemented a solution of this using sockets, but there were some issues so I am investigating a new/better way to send a file. I create a byte array which looks like this: length_of_filename|filename|file This should then be transmitted using the above mentioned classes, yet on the server side the byte array I read is completely messed up and I'm not sure why. The method I use to send: public static void Send(String filePath) { try { IPEndPoint endPoint = new IPEndPoint(Settings.IpAddress, Settings.Port + 1); Byte[] fileData = File.ReadAllBytes(filePath); FileInfo fi = new FileInfo(filePath); List<byte> dataToSend = new List<byte>(); dataToSend.AddRange(BitConverter.GetBytes(Encoding.Unicode.GetByteCount(fi.Name))); // length of filename dataToSend.AddRange(Encoding.Unicode.GetBytes(fi.Name)); // filename dataToSend.AddRange(fileData); // file binary data using (TcpClient client = new TcpClient()) { client.Connect(Settings.IpAddress, Settings.Port + 1); // Get a client stream for reading and writing. using (NetworkStream stream = client.GetStream()) { // server is ready stream.Write(dataToSend.ToArray(), 0, dataToSend.ToArray().Length); } } } catch (ArgumentNullException e) { Debug.WriteLine(e); } catch (SocketException e) { Debug.WriteLine(e); } } } Then on the server side it looks as follows: private void Listen() { TcpListener server = null; try { // Setup the TcpListener Int32 port = Settings.Port + 1; IPAddress localAddr = IPAddress.Parse("127.0.0.1"); // TcpListener server = new TcpListener(port); server = new TcpListener(localAddr, port); // Start listening for client requests. server.Start(); // Buffer for reading data Byte[] bytes = new Byte[1024]; List<byte> data; // Enter the listening loop. while (true) { Debug.WriteLine("Waiting for a connection... "); string filePath = string.Empty; // Perform a blocking call to accept requests. // You could also user server.AcceptSocket() here. using (TcpClient client = server.AcceptTcpClient()) { Debug.WriteLine("Connected to client!"); data = new List<byte>(); // Get a stream object for reading and writing using (NetworkStream stream = client.GetStream()) { // Loop to receive all the data sent by the client. while ((stream.Read(bytes, 0, bytes.Length)) != 0) { data.AddRange(bytes); } } } int fileNameLength = BitConverter.ToInt32(data.ToArray(), 0); filePath = Encoding.Unicode.GetString(data.ToArray(), 4, fileNameLength); var binary = data.GetRange(4 + fileNameLength, data.Count - 4 - fileNameLength); Debug.WriteLine("File successfully downloaded!"); // write it to disk using (BinaryWriter writer = new BinaryWriter(File.Open(filePath, FileMode.Append))) { writer.Write(binary.ToArray(), 0, binary.Count); } } } catch (Exception ex) { Debug.WriteLine(ex); } finally { // Stop listening for new clients. server.Stop(); } } Can anyone see something that I am missing/doing wrong?

    Read the article

  • DHCP and DNS services configuration for VOIP system, windows domain, etc

    - by Stemen
    My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

    Read the article

  • Show underlying applications mouse cursor when hovering over visible section of my application.

    - by Dylan Vester
    I am writing a WPF application that allows the user to draw over the entire screen when the right mouse button is held down. I use a full screen transparent overlay form to achieve this, however, as I draw lines with the mouse, what's happening is that the portion of my window that contains the line is becoming visible (as expected). The undesired effect of this is that if the line is over a part of another application such as a textbox, or hyperlink, this changes the cursor back to the default cursor my my app (arrow), instead of the other applications desired cursor (IBeam). I want my overlay to be seamless to the user, and just show their drawing path, rather than have any interaction with the mouse cursor. See my example below:

    Read the article

  • How to automate disbursement of electronic payments from one bank account to 20,000 other bank accou

    - by Dylan West
    I am helping a startup business to launch and I will be building or finding a shopping cart software for its website. There will only be one product for sale, but anytime someone buys a product, I have to use customer information like their zipcode and which distributor they bought from to calculate commissions that will go to the different distributors. All the incoming money will be sent to one sort of escrow account for a few weeks, and after that few weeks is over, I need to be able to "throw the switch" and cause each of the 20,000 distributors to get their rightful share of that escrow account, depending on the data stored that reflects their sales activity and commissions due. Is this something I can write a script to handle? Better yet, is this something an inexpensive or open source solution can handle, or something that can be setup in something like Paypal? Or is a better approach to somehow create a webpage where each distributor can login to and see their commissions due and initiate the account transfer on their own, but the web app restrict them from transferring more than what they're due? Thanks

    Read the article

  • Core Data Relationship List

    - by Dylan Copeland
    I'm not sure whether or not this is the appropriate way of doing this, but I was wondering what's the best way to approach a relationship to a value in a list with Core Data? For example, say you have a 'person' entity. Each person can have a different 'hair color'. I'm trying to basically define the hair colors in my data model and allow the 'person' entity to have a relationship to their given 'hair color. Is this possible? Good idea or bad? Thanks in advance.

    Read the article

  • Configure (or mimic) svn:externals to include code from Github in a svn-hosted project

    - by Dylan Beattie
    We use Subversion locally, and we're working on a project that uses a fork of Fluent NHibernate, which is hosted on Github. I'd like it set up so that a single svn checkout will retrieve everything necessary to build the project, but maintain the ability to fetch HEAD updates from github. Is there any way I can pull code from the Git repository as though it was an svn:external dependency? Can I just check the .git folder into our Subversion repository and just run git fetch when I need to, then svn commit the results?

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >