Search Results

Search found 870 results on 35 pages for 'jim burger'.

Page 11/35 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • What causes random clicking/navigation sound while PC is idle?

    - by Jim Linny
    On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

    Read the article

  • Windows 7 playback of dvr-Microsoft files stutters

    - by Jim Lynn
    I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-Microsoft format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-Microsoft (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-Microsoft file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-Microsoft files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-Microsoft looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for Windows Media Player but GraphStudio won't show it. It looks like Windows Media Player and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

    Read the article

  • Can't move or access WSS Central Administration site

    - by Jim
    We have several WSS Servers: WSS1 WSS2 WSS3 WSS4 SharePoint thinks that Central Administration is on WSS3 and that it can be access via SSL on port 22641. The problem is that central administration is not there. It was removed using the config wizard. We removed central admin from all servers to clean everything out, and we tried installing Central Admin on WSS1. The alternate access mappings still point to central admin on WSS3. We tried deleting the alternate access mappings, but SharePoint won't let you delete central admin's mapping. Later, we removed central admin from all of our servers and tried creating the Central Admin website on WSS3, where SharePoint already thinks it is. But for some reason SharePoint is creating the alternate access mappings using SSL, and we don't have a certificate for the server. Why is SharePoint creating alternate access mappings routing an https internal URL by default? How can we move central administration to a new server? We are using WSS 3.0.

    Read the article

  • Programmer Desk

    - by Jim
    I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: $1000-$2000. Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly http://www.beyondtheofficedoor.com/adjustable-height-table.php The Herman Miller Sense desk looks nice: http://www.csnofficefurniture.com/asp/superbrowse.asp?clid=32&caid=&sku=HML1212&refid=PG7-HML1212 . Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

    Read the article

  • How to Copy CD+Graphics / Karaoke CDs?

    - by Jim McKeeth
    Is there any good software to copy CD+Graphics (aka Karaoke CDs) for Windows 7? Preferably free. I can copy the audio portion just fine, but for some reason I keep looking the karaoke lyrics / graphics portion. It used to be that a lot of the software supported these specifically, but now I am having a hard time finding any mention of this feature, and the ones I have tried didn't work.

    Read the article

  • Security Essentials not installing and I suspect my machine is infected with malware

    - by Jim
    My mouse seems to be automatically right-clicking every few seconds, and sometimes constantly. My cursor will abruptly become an hourglass for a moment every once in a while, as well. It happens in spurts, as in it hasn't happened for about 10 minutes, but the preceding 20 before that it was happening constantly. I suspect that my machine is infected with malware of some sort, so I've tried installing Microsoft Security Essentials, but it presents the following error upon installation failure: My questions are: How can I solve the MSE installation issue and run a scan? Are there any indications that malware isn't actually my issue? Is MSE my best way to go about solving my issue, assuming that malware actually is the problem? Many thanks!

    Read the article

  • How to change controller numbering/enumeration in Solaris 10?

    - by Jim
    After moving a Solaris 10 server to a new machine, the rpool disk is now c1t0d0. We have some third party applications hard coded for c0t0d0. How can I change the controller enumeration on this machine? There is no longer a c0. I've tried rebuilding the /etc/path_to_inst, but the instance numbers don't seem to match up with the controller numbers. Also, it's not clear if i86pc platforms use this file. I've tried devfsadm -C to clear the dangling links, but I'm not sure how to cause devfsadm to start numbering from 0 again (or force certain devices in the tree to a specific controller number). Next I am going to try to create the symlinks manually in /dev/dsk and rdsk to point to the correct /devices. I feel like I am going way off path here. Any suggestions? Thanks

    Read the article

  • HDD RAID0 question

    - by Jim
    If you have 2 raptor 10k rpm drives in Raid0, can you add another sata (7200prm) drive outside of the RAID or would it have to be inside the RAID? What would be the consequences of adding a 7200 RPM drive to the raptor 10k rpm RAID0 besides the I/O speed going to 7200rpm.

    Read the article

  • Hosting 2 different SSL domains on the same IP [closed]

    - by Jim
    Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have 2 different domains, domain1.com and domain2.net. Both require SSL certificates. I've got the certificates signed by a CA and now need to set them up on Apache. I've got a single IP address and have found a post here: SSL site not using the correct IP in Apache and Ubuntu that apparently works for ubuntu but I am on CentOS and have not had the same luck trying that configuration. When I try that configuration, Apache dies telling me that the port is already in use: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 I had SSL working for a single domain but now that I've added the second, I get a browser warning about the cert not belonging to the domain. How do I get both domains to work using virtual host containers?

    Read the article

  • Mysterious login attempts to windows server

    - by Jim Balo
    I have a Windows 2008R2 server that is reporting failed login attempts from a number of workstations on our network. Some event log details: Event ID 4625, Status: 0xc000006d, Sub Status: 0xc0000064 Security ID: NULL SID, Account Name: joedoe, Account Domain: Acme Workstation Name: WINXP1, Source Network Address: 192.168.1.23, Source Port: 1904 Logon Process: NtLmSsp, Authentication Package: NTLM, Logon Type: 3 (network) I believe this is coming from some netbios service or similar (maybe the file explorer), keeping an inventory of its network neighborhood and also trying to authenticate. Is there a way to turn this off without having to turn off file sharing all together? In other words, clients authenticating against file servers that they use is of course no problem, but I want to eliminate clients trying to authenticate to servers that they are not using and have no business with. The above example is only one of thousands of log alerts for similar failed network authentications. What can I do to clean this up / handle this? Thanks.

    Read the article

  • What is a good programmer's desk? [closed]

    - by Jim
    I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly. The Herman Miller Sense desk looks nice. Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

    Read the article

  • Why does QuickTime lag in Firefox if I don't put my mouse over it?

    - by Jim McKeeth
    This has happened for me as long as I can remember. Since the first version of Firefox, on multiple computers and under different versions of Windows. QuickTime plays fine in IE and Chrome (even with Firefox in the background), but in Firefox if my mouse is not over the QuickTime window then it will start to studder, then lag and eventually just stop. To be honest, I do keep quite a few tabs open, but Firefox stays at 1% CPU (even when QuickTime runs) and I have a few gigs of free RAM. It is the same for any resolution of video or audio. If the mouse is just one pixel in the client area of the QuickTime then it usually plays fine. Other video formats typically play fine. Does anyone else notice this behavior? Ultimately I would like a fix besides keeping my mouse over the QuickTime window.

    Read the article

  • Is Centos legal?

    - by Jim B
    I'm trying to figure out if centos is legal (or simply grey). Here's what makes me wonder: They seem to go to great pains not to mention that they are based on redhat in the FAQ they mention a policy about using the redhat trademark, but the link no longer exists. When installing it it's not hard to find a lot of redhat code. I don't bother much with the linux world anymore but I had a client that was wondering about it as his auditors picked up on it and wanted to know where his license was.

    Read the article

  • How to change controller numbering/enumeration in Solaris 10?

    - by Jim
    After moving a Solaris 10 server to a new machine, the rpool disk is now c1t0d0. We have some third party applications hard coded for c0t0d0. How can I change the controller enumeration on this machine? There is no longer a c0. I've tried rebuilding the /etc/path_to_inst, but the instance numbers don't seem to match up with the controller numbers. Also, it's not clear if i86pc platforms use this file. I've tried devfsadm -C to clear the dangling links, but I'm not sure how to cause devfsadm to start numbering from 0 again (or force certain devices in the tree to a specific controller number). Next I am going to try to create the symlinks manually in /dev/dsk and rdsk to point to the correct /devices. I feel like I am going way off path here. Any suggestions? Thanks Update: This is on virtual ESXi hardware with an additional pass-through HBA. There is no controller 0 on the machine, that is for sure. devfsadm -C cleans up all the c0 device symlinks but keeps the already linked controllers at their current ids.

    Read the article

  • Can I repair a short circuiting problem in a Dell Inspiron 6000 that occurs when it is picked up?

    - by jim.e.clark
    I have a couple of Dell Inspiron 6000 notebooks that work perfectly fine unless you pick them up by one corner (as most people would). When you lift the notebook it flexes slightly and the notebook shorts out. Sometimes even a gentle bump will cause this to happen. So far the notebook always starts back up without issue, but this behavior is...inconvenient. It occurred to me that someone familiar with the innards might be able to suggest a little MacGyver fix for this. A little electrical tape in the right spot or something like that. Or perhaps this is a common problem and the answer is here, waiting for me to stumble on the correct keywords. I would appreciate any suggestions Note: It is probably worth mentioning that I have disassembled a Dell notebook before to replace a bluetooth card so I comfortable opening up the systems.

    Read the article

  • Why can't the Adobe Flash player send key strokes it doesn't handle to the browse in which it is run

    - by jim.e.clark
    I'm a heavy web user that uses the address bar constantly while browsing the web. I often use Ctrl + T to open a new tab or Ctrl + D to move focus to the address bar so it is very annoying that these shortcut keys do not work when a Flash object has focus on the active browser tab. I would happily give up all keyboard handling in the Flash Player in exchange for having keystrokes sent to the browser. In fact, as someone who has worked in software development for over 15 years it is hard to believe that Flash doesn't pass common browser shortcut keys to the browser or have an option to do so. So my question is this: Am I missing some option, some Flash shortcut key or some Firefox add-on that will alleviate my suffering?

    Read the article

  • STARTTLS issues with sendmail

    - by Jim
    I just switch hosts and now have to configure sendmail with certificates in order to send mail. Is there anyone here that can point me to some solid documentation that is known to work? I'm on CentOS, using sendmail 8.13. I am currently trying to figure out why I am getting "Relaying denied. Proper authentication required". I'd be happy to post my mc file if someone thinks thay can help..

    Read the article

  • SSD Fresh Does Not Start

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

    - by Jim Jeffers
    I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

    Read the article

  • Silverlight Cream for June 01, 2010 -- #874

    - by Dave Campbell
    In this Issue: Michael Washington, Alan Beasley and Michael Washington, Miroslav Miroslavov, Max Paulousky, Teresa and Ronald Burger, Laurent Duveau, Tim Heuer, Jeff Brand, Mike Snow, and John Papa. Shoutouts: To pay homage to the Advanced Options button in Expression Blend, Adam Kinney posted: Expression Blend Advanced Options square wallpaper SilverLaw stood his drag and drop ripple on it's head for this one: Silver Soccer - A Case Study for the Flexible Surface Effect (Silverlight 4) From SilverlightCream.com: Expression Blend DataStore - A Powerful Tool For Designers Michael Washington dug into the documentation and with some Microsoft assistance has figured out how to use the SetDataStoreAction in SketchFlow... good tutorial and a game to demonstrate it's use. Windows Phone 7 View Model Style Video Player Alan Beasley and Michael Washington teamed up again to produce a ViewModel-Style Video Player for WP7 ... very nice interface I might add... very detailed tutorial and all the code... oh, and did you notice it uses MVVMLight... on WP7? ... just thought I'd mention that :) Navigation in 3D world of 2D objects In part 7 of the CompleteIT code explenation, Miroslav Miroslavov is discussing some of the very cool animation they did... 3D, moving camera... cool stuff! Search Engine Optimization (SEO) for Silverlight Applications. Part 2 Max Paulousky has part 2 of his Silverlight 4 and SEO series up. In part 2 he's discussing sitemaps and html content providing. He also has good links showing where to submit your sitemaps and information. Mousin’ down the PathListBox Teresa and Ronald Burger (not sure which) has a post up about the PathListBox and how they drew the path that they ended up using, and the code used to enable animation. Dynamically apply and change Theme with the Silverlight Toolkit We've all had fun playing with themes, but Laurent Duveau has an example up of letting your users change the theme at run-time. Microsoft Translator client library for Silverlight Tim Heuer has been playing with the Microsoft Translator for Silverlight and he has a "Works on My Machine" license on what he's making available .. but considering his access to resources... I'd say go for it :) Custom Per-Page Transitions in Windows Phone 7 Jeff Brand has a follow-on to his other WP7 post about page transitions and is now discussing per-page transitions Silverlight Tip of the Day #26 – Changing the Startup Class Mike Snow's latest 'tip' is a little more involved than a tip ... changing the startup class and actually removing (in his example), the page and app classes... code and xaml! I've seen this before but never explained as clean... fun stuff. Behaviors in Blend 4 (Silverlight TV #30) Episode 30 of Silverlight TV (now a tag at Silverlight Cream) finds John Papa talking to Adam Kinney about Behaviors in Blend 4... not only using them but creating a custom one. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Windows Server 2008 DNS - restart after changing forwarder?

    - by Jim
    I had a dns forwarder configured that seems to be choking on a particular server name so I switched to using google's dns as a forwarder (8.8.4.4). When I change that setting in Windows DNS (Server 2008 R2) Do i need to restart the dns service for the change to take effect? I ask because i can do a nslookup on the name using 8.8.4.4 and it resolves but even with 8.8.4.4 in my forwarders list it will not resolve when i run nslookup on my local DNS server.

    Read the article

  • How to backup/restore OSX Parental Controls before/after complete reimage?

    - by Jim Anderson
    We typically "nuke and pave" users Mac OSX laptops if they have software issue. Prior to doing so, we backup the primary (non-admin) user's home folder. Our standard image has four accounts: Admin (uber admin user); Parent (admin account for the parents of students); Loaner (so our standard image will also work for our loaner laptop pool); Student (this is the primary, non-admin user of the laptop) Our standard image has only minimal Parental controls on the Loaner and Student accounts. Some parents choose to tighten the parental controls. We never know when parents have made changes to parental controls, or what those changes are. Once we have reimaged the machine with our standard image (minimal parental controls) we would like to be able to restore any custom parental controls parents may have placed on their student's account. Any help in this would be appreciated. Thanks.

    Read the article

  • How to drop all subnets outside of the US using iptables

    - by Jim
    I want to block all subnets outside the US. I've made a script that has all of the US subnets in it. I want to disallow or DROP all but my list. Can someone give me an example of how I can start by denying everything? This is the output from -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:ftp state NEW DROP icmp -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And these are the rules iptables --F iptables --policy INPUT DROP iptables --policy FORWARD DROP iptables --policy OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -i eth0 --dport 21 -m state --state NEW -j ACCEPT iptables -A INPUT -p icmp -j DROP Just for clarity, with these rules, I can still connect to port 21 without my subnet list. I want to block ALL subnets and just open those inside the US.

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >