jon andersen - Page 11 - Developer IT

Preprocessor directive #ifndef for C/C++ code

- by Leif Andersen

In eclipse, whenever I create a new C++ class, or C header file, I get the following type of structure. Say I create header file example.h, I get this: /*Comments*/ #ifndef EXAMPLE_H_ #define EXAMPLE_H_ /* Place to put all of my definitions etc. */ #endif I think ifndef is saying that if EXAMPLE_H_ isn't defined, define it, which may be useful depending on what tool you are using to compile and link your project. However, I have two questions: Is this fairly common? I don't see it too often. And is it a good idea to use that rubric, or should you just jump right into defining your code. What is EXAMPLE_H_ exactly? Why not example.h, or just example? Is there anything special about that, or could is just be an artifact of how eclipse prefers to autobuild projects? Thank you for your help.

Read the article

How can I spot subtle Lisp syntax mistakes?

- by Marius Andersen

I'm a newbie playing around with Lisp (actually, Emacs Lisp). It's a lot of fun, except when I seem to run into the same syntax mistakes again and again. For instance, here's something I've encountered several times. I have some cond form, like (cond ((foo bar) (qux quux)) ((or corge (grault warg)) (fred) (t xyzzy))) and the default clause, which returns xyzzy, is never carried out, because it's actually nested inside the previous clause: (cond ((foo bar) (qux quux)) ((or corge (grault warg)) (fred)) (t xyzzy)) It's difficult for me to see such errors when the difference in indentation is only one space. Does this get easier with time? I also have problems when there's a large distance between the (mal-)indented line and the line it should be indented against. let forms with a lot of complex bindings, for example, or an unless form with a long conditional: (defun test () (unless (foo bar (qux quux) (or corge (grault warg) (fred)))) xyzzy) It turns out xyzzy was never inside the unless form at all: (defun test () (unless (foo bar (qux quux) (or corge (grault warg) (fred))) xyzzy)) I auto-indent habitually and use parenthesis highlighting to avoid counting parentheses. For the most part it works like a breeze, but occasionally, I discover my syntax mistakes only by debugging. What can I do?

Read the article

Create a simple automatic image switcher using jQuery

- by Kim Andersen

Hi all. I need to create a very simple image switcher that changes my images automatically. I have the following code: <div class="imgCarousel"> <div class="imgC1 left"><img src="/media/1614/1_1.jpg" alt="img1" /></div> <div class="imgC2 left"><img src="/media/1615/2_1.jpg" alt="img2" /></div> <div class="imgC3 left"><img src="/media/1616/3_1.gif" alt="img3" /></div> <div class="imgC4 left"><img src="/media/1617/4_1.jpg" alt="img4" /></div> <div class="imgC5 left"><img src="/media/1618/5_1.jpg" alt="img5a" /></div> <div class="imgC6 left"><img src="/media/1620/6_1.jpg" alt="img6a" /></div> <div class="imgC7 left"><img src="/media/1622/7.jpg" alt="img7" /></div> </div> Two of the above images should be switched automatically after a certain amount of time (every 3-4 sec.). This means that after 4 seconds, I'd like to change the image called /media/1618/5_1.jpg with another image. And after another 4 seconds, I'd switch back again. The same shold be made for one of my other images. How can I acomplish this with some jQuery?

Read the article

How do i find if an object is before or after a waypoint?

- by BoMann Andersen

Im working on a racing game for a school project. Using Visual studio 10 pro, and Irrlicht. Sorry for bad grammar ., and its my first question so not sure if its done right. How i want it to work is that i make waypoints at different points on the track, and then i run my waypoint check to see if a car is past its next waypoint (the next it "needs" to go past), if yes then it updates the next waypoint, else nothing. The way i hope this will work is, i make a vector from n to n+1, then find the vector that is perpendicular to the first vector at n. Then i see if the object is in front or behind that vector. I found a Gamedev.net forumpost that helped me make this function: void Engine::checkWaypoint(Vehicle* vehicle) { btVector3 vector = waypoints[vehicle->nextWaypoint]; // n btVector3 nextVector = waypoints[vehicle->nextWaypoint + 1]; // n+1 vector = nextVector - vector; // First vector btVector3 pos = btVector3(vehicle->position.X,vehicle->position.Y,vehicle->position.Z); float product = vector.dot(pos - waypoints[vehicle->nextWaypoint]); // positiv = before, negative = behind if(product < 0) vehicle->nextWaypoint += 1; } Current bugs with this is: Updates the nextwaypoint more then ones without going past a new point. When it gets to the end and resets, it stops triggering on the first waypoints. So my questions: Is this an good way to do this? Did i do it right?

Read the article

PHP, MySQL, Memcache / Ajax Scaling Problem

- by Jeff Andersen

I'm building a ajax tic tac toe game in PHP/MySQL. The premise of the game is to be able to share a url like mygame.com/123 with your friends and you play multiple simultaneous games. The way I have it set up is that a file (reload.php) is being called every 3 seconds while the user is viewing their game board space. This reload.php builds their game boards and the output (html) replaces their current game board (thus showing games in which it is their turn) Initially I built it entirely with PHP/MySQL and had zero caching. A friend gave me a suggestion to try doing all of the temporary/quick read information through memcache (storing moves, and ID matchups) and then building the game boards from this information. My issue is that, both solutions encounter a wall when there is roughly 30-40 active users with roughly 40-50 games running. It is running on a VPS from VPS.net with 2 nodes. (Dedicated CPU: 1.2GHz, RAM: 752MB) Each call to reload.php peforms 3 selects and 2 insert queries. The size of the data being pulled is negligible. The same actions happen on index.php to build the boards for the initial visit. Now that the backstory is done, my question is: Would there be a bottleneck in that each user is polling the same file every 3 seconds to rebuild their gameboards, and that all users are sitting on index.php from which the AJAX calls are made within the HTML. If so, is it possible to spread the users' calls out over a set of files designated to building the game boards (eg. reload1.php 2, 3 etc) and direct users to the appropriate file. Would this relieve the pressure? A long winded explanation; however, I didn't have anywhere else to ask. Thanks very much for any insight.

Read the article

Writing Strings to files in python

- by Leif Andersen

I'm getting the following error when trying to write a string to a file in pythion: Traceback (most recent call last): File "export_off.py", line 264, in execute save_off(self.properties.path, context) File "export_off.py", line 244, in save_off primary.write(file) File "export_off.py", line 181, in write variable.write(file) File "export_off.py", line 118, in write file.write(self.value) TypeError: must be bytes or buffer, not str I basically have a string class, which contains a string: class _off_str(object): __slots__ = 'value' def __init__(self, val=""): self.value=val def get_size(self): return SZ_SHORT def write(self,file): file.write(self.value) def __str__(self): return str(self.value) Furthermore, I'm calling that class like this: def write(self, file): for variable in self.variables: variable.write(file) I have no idea what is going on. I've seen other python programs writing strings to files, so why can't this one? Thank you very much for your help.

Read the article

A version of the Windows "FILE:" port which does not prompt for the file name but autogenerates one.

- by Thorbjørn Ravn Andersen

Hi. I have a process where one of the things to do is to capture the output from a print into a file for further processing. For this I have configured a "FILE:" printer port which works very nicely but asks everytime for the file name to use. Unfortunately "FILE" is not a very descriptive word when trying to use a search engine :( Is there a small driver somewhere which does exactly the same as the FILE: driver, but can automatically generate a filename (perhaps based on a pattern) and just print to that?

Read the article

: for displaying all elements in a multidimensional array in python 3.1.

- by Leif Andersen

I have a multidimensional array in python like: arr = [['foo', 1], ['bar',2]] Now, if I want to print out everything in the array, I could do: print(arr[:][:]) Or I could also just do print(arr). However, If I only wanted to print out the first element of each box (for arr, that would be 'foo', 'bar'), I would imagine I would do something like: print(arr[:][0]) however, that just prints out the first data blog (['foo', 1]), also, I tried reversing it (just in case): print(arr[0][:]) and I got the same thing. So, is there anyway that I can get it to print the first element in each tuple (other than: for tuple in arr: print(tuple[0]) )? Thanks.

Read the article

Are there any real life uses for the Java byte primitive type?

- by Thorbjørn Ravn Andersen

For some inexplicable reason the byte primitive type is signed in Java. This mean that valid values are -128..127 instead of the usual 0..255 range representing 8 significant bits in a byte (without a sign bit). This mean that all byte manipulation code usually does integer calculations and end up masking out the last 8 bits. I was wondering if there is any real life scenario where the Java byte primitive type fits perfectly or if it is simply a completely useless design decision? EDIT: The sole actual use case was a single-byte placeholder for native code. In other words, not to be manipulated as a byte inside Java code.

Read the article

How do (or can I) hack a gem temporarily while looking for a bug?

- by Tom Andersen

I have a gem installed in my home directory on a laptop (eg not THE server). I have installed ruby 1.9.1 and also some other gems, notably right_aws - which allows access to s3, etc with ruby. All works, except there is a bug when I do a query on SimpleDB, and the returned list of items includes an item with any two byte utf-8 character in its itemName(). So I look through the sources of the right_aws gem installed on my machine, and I can see some places where I would like to test a fix. If I edit the file, save changes, (needing a password), then restart the server (script/server), it ignores my changes. I am quite new at ruby - do you have to 'compile' or other similar move to get the source code changes made take effect? I can see the edited file is changed by viewing it in terminal, etc.

Read the article

ASP.NET mvcConf Videos Available

- by ScottGu

Earlier this month the ASP.NET MVC developer community held the 2nd annual mvcConf event. This was a free, online conference focused on ASP.NET MVC – with more than 27 talks that covered a wide variety of ASP.NET MVC topics. Almost all of the talks were presented by developers within the community, and the quality and topic diversity of the talks was fantastic. Below are links to free recordings of the talks that you can watch (and optionally download): Scott Guthrie Keynote The NuGet-y Goodness of Delivering Packages (Phil Haack) Industrial Strenght NuGet (Andy Wahrenberger) Intro to MVC 3 (John Petersen) Advanced MVC 3 (Brad Wilson) Evolving Practices in Using jQuery and Ajax in ASP.NET MVC Applications (Eric Sowell) Web Matrix (Rob Conery) Improving ASP.NET MVC Application Performance (Steven Smith) Intro to Building Twilio Apps with ASP.NET MVC (John Sheehan) The Big Comparison of ASP.NET MVC View Engines (Shay Friedman) Writing BDD-style Tests for ASP.NET MVC using MSTestContrib (Mitch Denny) BDD in ASP.NET MVC using SpecFlow, WatiN and WatiN Test Helpers (Brandon Satrom) Going Postal - Generating email with View Engines (Andrew Davey) Take some REST with WCF (Glenn Block) MVC Q&A (Jeffrey Palermo) Deploy ASP.NET MVC with No Effort (Troels Thomsen) IIS Express (Vaidy Gopalakrishnan) Putting the V in MVC (Chris Bannon) CQRS and Event Sourcing with MVC 3 (Ashic Mahtab) MVC 3 Extensibility (Roberto Hernandez) MvcScaffolding (Steve Sanderson) Real World Application Development with Mvc3 NHibernate, FluentNHibernate and Castle Windsor (Chris Canal) Building composite web applications with Open frameworks (Sebastien Lambla) Quality Driven Web Acceptance Testing (Amir Barylko) ModelBinding derived types using the DerivedTypeModelBinder in MvcContrib (Steve Hebert) Entity Framework "Code First": Domain Driven CRUD (Chris Zavaleta) Wrap Up with Jon Galloway & Javier Lozano I’d like to say a huge thank you to all of the speakers who presented, and to Javier Lozano, Eric Hexter and Jon Galloway for all their hard work in organizing the event and making it happen. Hope this helps, Scott P.S. I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Are You Using Windows Live Mesh?

- by Ben Griswold

Most of the time, I’m the guy who authors the show notes for the Herding Code Podcast. The workflow is relatively straight-forward: Jon shares the pre-production audio with me, I compete my write up and then ship the notes back to Jon for publishing with the edited audio. All file sharing is all done with shared folders in the Windows Live Mesh. The director of my kid’s preschool was looking for a way to access her work computer from her home office. VPN connection? Remote desktop? FTP? Nope. I installed Windows Live Mesh in a matter of minutes, synchronized a number of folders and she was off and running. (The neat thing is she’s running a PC in the office and a Mac at home.) I was using Dropbox before discovering Mesh. Dropbox is still very cool but I’m in and out of Mesh enough that it’s taken over. Actually I still have a Dropbox folder – it’s just being synched by Mesh now. If you’re interested in giving Live Mesh a whirl, here’ are the notable links as found on the product’s site: What you need Create your mesh Sync folders Share folders Use your Live Desktop Connect to a remote computer Use a mobile phone Good luck!

Read the article

So, whats the best book on C#?

- by mbcrump

I see this question several times a day from newbie’s to professionals. I have listed the best C# books that I have read so far. ECMA-334 C# Language Specification. – FREE book. This is probably the best place to start. Read it backwards and forwards and you can even request a hard copy. Absolute Beginners Guide to C Sharp 2nd Edition – Used this early on and found it very useful even if its game programming. C-Sharp 2.0 - The Complete Reference, 2nd Edition (McGraw-Hill, 2006) – One of the most useful books that is always with me. It contains short example code and is very well written. Dot Net Zero - Charles Petzold - FREE book and you should definately give it a read. C Sharp in Depth by Jon Skeet - Probably one of the most in depth books on C Sharp and definitely not for beginners. Jon Skeet knows C# like no other. I would consider this book the Bible of C#. If you understand 50% of this book, you have a good understanding of the language. CLR via C Sharp 3rd Edition – I just started reading this book and it is another book thats not for beginners. If you really want to understand the CLR then give this book a try. Well, thats it. I hope you enjoy the books as I have spent a lot of time researching different C# books.

Read the article

php form validation with javascript

- by Jon Hanson

hi guys i need help trying to figure out why the alert box doesnt show up when i run this. im also new at programming. html i due just fine. im currently taking a php class, and the teacher thought it would be fun to have us create a form and validate it. my problem is i am trying to call the function which then would validate it. My problem is its not calling it, and i cant quite figure out why. please help? jons viladating <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> <head> <link rel="stylesheet" href="decor.css" type="text/css"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <title>jons viladating</title> <script type="text/javascript">  </script> <h1>jons validations test</h1> </head> <body> <div id="rightcolumn"> <img src="hula.gif" align="right"/> </div> <text align="left"> <form name="jon" action="formoutput.php" onsubmit="return showjonsForm()" Method="post"> <fieldset style="width:250px"> <label> first name</label> <input type="text" name="fname" size="15" maxlength="22" onBlur="checkRequired( this,'fname')"/><br /> <label>last name</label> <input type="text" name="lname" size="10" maxlength="22"> <br /> </fieldset> <fieldset style="width:250px"> <label>address</label> <input type="text" name="adrs1" size="10" maxlength="30"><br /> <span class="msg_container" id="adrs2"></span><br /> <label>city</label> <input type="text" name="city" size="10" maxlength="15"><br /> <span class="msg_container" id="city"></span><br /> <label>state</label> <input type="text" name="state" size="10" maxlength="2"><br /> <span class="msg_container" id="state"></span><br /> <label>zip</label> <input type="text" name="zip" size="10" maxlength="5"><br /> </fieldset> <fieldset style="width:250px"> <label>phone</label> <input type="text" name="phone" size="10" maxlength="10"><br /> <div>please input phone number in this format 1234567892 thank you </div> <label>email</label> <input type="text" name="email" size="10" maxlength="22"><br /> <div> password must have 1 number upper case and minimum of 6 charcters</div> <label>password</label> <input type="text" name="pw2" size="10" maxlength="12"><br /> <label>select gender type</label> <select name="sex" size="1" <br /> <option>male</option> <option>female</option> <option>timelord</option> </select> <label>date of birth</label> <input type="text name="dob" size="8" maxlength="8"/> <div> would you like to know know more</div> <label> yes</label> <input type="checkbox" checked="checked" name="check" /> </fieldset> <input type="submit"/></form> </form> <div id="footer"> <img src="laps2.jpg"> <img src="orange.jpg"><img src="ok.jpg"> </div> </body> </html>

Read the article

Windows Server 2008 R2 Accessing NFS share without AD or NIS

- by Jon Rhoades

I'm trying to mount an NFS share on our NetApp SAN on Windows 2008 R2. Using XP I have no problem mounting this share without a username/NIS/pswd file etc, but the new functionality in 2008 seems to insist on either using AD or an NIS server (to "streamline" Services for NFS MS removed user account mapping) see Technet. When I go to map the share using "map network drive" no combination of "root", no username, no password, my username works. Using the command line mount -o anon \\172... :n or mount -o -u:root \\172... :n either gives me a network error 53 or 67 error Is it possible with 2008 to mount an NFS share without AD or NIS? If so what am I doing wrong? (Security is taken care off by IP address permissions and VLANs)

Read the article

Linux Server Performance Monitoring

- by Jon

I'm looking to monitor performance on my Linux servers (which happen to be Centos). What are the best tools for monitoring things in realtime such as: Disk Performance I/O, swapping etc.. CPU Performance Looking for low level tools, rather than web based tools such as Nagios, Ganglia etc... n.b. I'd like to know exactly what each tool does rather than just having a list of random toolnames if possible please. Why the tool is a better option than others would be good also.

Read the article

LVS TCP connection timeouts - lingering connections

- by Jon Topper

I'm using keepalived to load-balance connections between a number of TCP servers. I don't expect it matters, but the service in this case is rabbitmq. I'm using NAT type balancing with weighted round-robin. A client connects to the server thus: [client]-----------[lvs]------------[real server] a b If a client connects to the LVS and remains idle, sending nothing on the socket, this eventually times out, according to timeouts set using ipvsadm --set. At this point, the connection marked 'a' above correctly disappears from the output of netstat -anp on the client, and from the output of ipvsadm -L -n -c on the lvs box. Connection 'b', however, remains ESTABLISHED according to netstat -anp on the real server box. Why is this? Can I force lvs to properly reset the connection to the real server?

Read the article

Most useful AutoHotkey scripts?

- by Jon Erickson

What AutoHotkey scripts have you found that proved to be extremely useful? I'll share one that I am using for multiple monitors. Windows + Right: Move window from the left monitor to the right monitor #right:: WinGet, mm, MinMax, A WinRestore, A WinGetPos, X, Y,,,A WinMove, A,, X+A_ScreenWidth, Y if(mm = 1){ WinMaximize, A } return Windows + Left: Move window from the right monitor to the left monitor #left:: WinGet, mm, MinMax, A WinRestore, A WinGetPos, X, Y,,,A WinMove, A,, X-A_ScreenWidth, Y if(mm = 1){ WinMaximize, A } return

Read the article

Lenovo Mini Wireless Keyboard N5901: Remap orange "My Computer" button

- by Jon Schneider

I have a Lenovo Mini Wireless Keyboard N5901 (a.k.a. Part No. 57Y6336) that I'm using with an HTPC running Windows 7. The remote comes with an orange button in the top-left corner that by default, when pressed, opens the Windows "My Computer" window. I would like to remap / reprogram this button to act like the green "Windows Media Center" button instead on a Windows Media Center (WMC) remote; that is, open Windows Media Center if it isn't already open, or go to the WMC homepage if WMC is already open. I've tried several keyboard-remapping utilities (as recommended in other, more general "how to remap keyboard key?" SuperUser.com questions) including SharpKeys, Key Mapper, and KeyTweak, with no luck so far. None of these utilities recognize the orange button -- they all do recognize that some key was pressed, but display a value for the key of "unsupported" or something similar. I was able to use a utility called Keyboard Scan Code Generator to determine that a press of the orange button has a KeyData value of 16777217 (0x1000001), and a "Virtual Code" value of 182. (The other "media" buttons on the N5901 have the same KeyData value, but different Virtual Code values). I'm not sure at this point where in Windows this keystroke is being interpreted as a command to open "My Computer." There is no special software / driver for this device; it worked out of the box with Windows 7, no special driver install necessary. Is there any way to accomplish this? Thanks in advance for any suggestions!

Read the article

Linux Server Performance Monitoring

- by Jon

I'm looking to monitor performance on my Linux servers (which happen to be Centos). What are the best tools for monitoring things in realtime such as: Disk Performance I/O, swapping etc.. CPU Performance Looking for low level tools, rather than web based tools such as Nagios, Ganglia etc... n.b. I'd like to know exactly what each tool does rather than just having a list of random toolnames if possible please. Why the tool is a better option than others would be good also.

Read the article

unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

- by jon

I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

Read the article

iPhone App to Remotely Control Windows Media Center

- by Barry-Jon

Can anyone recommend an iPhone app, for non-jailbroken devices, that can be used to remotely control Windows (7, if it matters) Media Center from outside the home WiFi network? The objective is to be able to connect to the Media Center box during the day when I am not home. For instance, if I realise that the new series of [insert very trendy new show here] is starting tonight and I hadn’t set up a series link I could fire up the app and set my machine to record it. Solutions could include native iPhone apps, iPhone optimised web apps or regular web apps.

Read the article

Can Windows 7 enable Folder Redirection via Group Policy?

- by Jon-Eric

I'd like to enable folder redirection on my stand-alone Windows 7 Pro box. Is that possible? The Group Policy Editor shown in the Managing Roaming User Data Deployment Guide has a Folder Redirection node that I don't see:

Read the article

Forefront 2010 Antispam vs Exchange 2010 Antispam?

- by Jon

They look pretty similar, do they work together or independently? For example you have content filtering in Forefront where you can specify SCL barriers, just like in Exchange. However theres no where to specify the Spam mailbox. So will the spam mailbox still be used if I configure this in Forefront?

Read the article

Software restriction policies set in the registry don't update Local Group Policy

- by Jon Rhoades

The joys of a Samba domain... First off Domain Group policy can't be used until Samba 4 arrives. We need to setup Software Restriction Policies (SRPs) on most of the computers in our Samba domain and I would dearly like to automate this. (We are moving away from just disabling the Windows installer). The traditional way is to set SRPs using Local Group Policy (LGP) Computer Conf-Windows Settings-SRP but this involves visiting every machine as it can't be set using in NTConfig.pol. It is possible to attempt to create the SRPs directly in the registry: [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Safer\CodeIdentifiers\262144\Paths\{30628f61-eb47-4d87-823b-6683a09eda87}] "LastModified"=hex(b):40,a2,94,09,b5,5d,ca,01 "Description"="" "SaferFlags"=dword:00000000 "ItemData"="C:\\location\\subfolder" SaferFlags DWORD seems to be what turns it on or off, but although this seems to work it does not update the Local Group Policy - SRPs still show as "No SRPs Defined". Where does the LGP store this setting - is it even in the registry and more importantly - Is there a cleverer way of setting up SRPs?

Search Results

Search found 1110 results on 45 pages for 'jon andersen'.

Page 11/45 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18 | Next Page >

- by Leif Andersen

- by Marius Andersen

- by Kim Andersen

- by BoMann Andersen

- by Jeff Andersen

- by Leif Andersen

- by Thorbjørn Ravn Andersen

- by Leif Andersen

- by Thorbjørn Ravn Andersen

- by Tom Andersen

- by ScottGu

- by Ben Griswold

- by mbcrump

- by Jon Hanson

- by Jon Rhoades

- by Jon

- by Jon Topper

- by Jon Erickson

- by Jon Schneider

- by Jon

- by jon

- by Barry-Jon

- by Jon-Eric

- by Jon

- by Jon Rhoades

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18 | Next Page >