Search Results

Search found 294 results on 12 pages for 'keene maverick'.

Page 11/12 | < Previous Page | 7 8 9 10 11 12  | Next Page >

• apt-cacher ng / upgrade fails from client

  - by todayis23

  I'm running apt-cacher ng on an Ubuntu Hardy server and try to upgrade the packages on a Natty client (which was initially a Maverick). I didn't do anything on the server. On the client I tried two setups. I configure APT to use a http-proxy. On the client I did a "apt-get update" which worked fine, but very slowly. In the acng-report.html I see an entry, which seems to be correct. After verifying Install these packages without verification [y/N]? y "apt-get upgrade" failes with the message: Err http://archive.ubuntu.com/ubuntu/ natty-updates/main libnux-0.9-common all 0.9.48-0ubuntu1.1 503 Name or service not known The GUI update manager fails as well with the message, that untrusted packages will be installed. I edit sources.list and add the server in the correct format to all sources. "apt-get update" is very slowly... and I get a lot of errors like this: W: Failed to fetch http://[::ffff:10.10.10.10]:3142/archive.ubuntu.com/ubuntu/dists/natty/main/binary-i386/Packages 403 Forbidden file type or location After that "apt-get upgrade" says: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. What could be wrong? Is it possible to use apt-cacher ng on an older system for upgrading newer systems? Thank you in advance!

  Read the article

• apt-get update stuck on "Waiting for Headers"

  - by crasic

  I'm setting up a Maverick server on a spare PC. The install completes fine and the system boots up into the shell. However, when I try to do a apt-get update , apt hangs on almost every entry with the message 99% [Waiting for headers] sometimes a message of 96 b/s appears on the far right. The actual percent that it claims also varies. Searching around online gave a potential solution by using the option Acquire::http::Pipeline-Depth="0" this somewhat alleviates the problem, i.e. it stalls on every other entry with the same message as above. If you wait it out (the whole update took about 4 hours), the update still fails as a good portion of the hits show a "unable to connect" or similar message, despite the fact that I can ping the server from the pc just fine. The problem is also unrelated to the mirror used since I've tried about a dozen mirrors with no success, I've even tried commenting out everything but the main entry in sources.list and it still refuses to update. The network connection is fine since I can ping and wget (apt won't let me install lynx until I run a successful update) just fine. I've also reinstalled the distro with no luck. The only thing weird about the setup is that the PC is connecting to the internet through my windows laptop with ICS configured properly, but as I've said before, the network connection is fine.

  Read the article

• How do I understand the partition table? (I want to start over.)

  - by Sammy Black

  I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

  Read the article

• Compiz: How can I pin osd-lyrics to the Desktop?

  - by joebuntu

  Hey ya, I have certain applications pinned to my desktop. such as Rainlendar (1), which offers this option in the settings window conky (2), with "own_window_type normal" in my ~/.conkyrc Rhythmbox's Desktop Cover Art plugin (3), a python plugin sticked to the desktop. They all hide nicely below all other Windows. I set Compiz to not minimize them on "show desktop" command using "window rules". I also use [osd-lyrics][1] to display music lyrics. It's default behaviour is to stick always on top, which is irritating sometimes and, in my case, looks rather fugly. (4) See screenshot at: http://i.imgur.com/ie16K.jpg Now how can I tell Compiz to pin the osd-lyrics bar to the desktop below all other windows and not minimize it? I tried all sorts of window rules and exceptions, e.g. using "class=osd-lyrics", "title=osd-lyrics" but the OSD doesn't seem to match any of these. Any ideas? Running: Ubuntu 10.10 Maverick Meerkat, Compiz 0.8.6, osd-lyrics 0.3 from code.google.com/p/osd-lyrics

  Read the article

• How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

  - by MoLE

  I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

  Read the article

• how to solve this problem

  - by Surbir

  root@me-desktop:~# sudo apt-get install aircrack-ng Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: aircrack-ng 0 upgraded, 1 newly installed, 0 to remove and 446 not upgraded. 1 not fully installed or removed. Need to get 1,579kB of archives. After this operation, 2,843kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ maverick/universe aircrack-ng i386 1:1.1-1 [1,579kB] Fetched 1,579kB in 1min 9s (22.7kB/s) Selecting previously deselected package aircrack-ng. (Reading database ... 520739 files and directories currently installed.) Unpacking aircrack-ng (from .../aircrack-ng_1%3a1.1-1_i386.deb) ... Processing triggers for man-db ... Setting up linux-image-3.0.1-030001-generic (3.0.1-030001.201108060905) ... Running depmod. update-initramfs: Generating /boot/initrd.img-3.0.1-030001-generic Warning: No support for locale: en_US.utf8 Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/nvidia-common 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic exec: 15: update-grub: not found run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.0.1-030001-generic.postinst line 1010. dpkg: error processing linux-image-3.0.1-030001-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up aircrack-ng (1:1.1-1) ... Errors were encountered while processing: linux-image-3.0.1-030001-generic E: Sub-process /usr/bin/dpkg returned an error code (1) root@me-desktop:~#

  Read the article

• Tutorial on Using OpenSSL with pthreads

  - by Sadeq Dousti

  OpenSSL documents state that it can safely be used in multi-threaded applications provided that at least two callback functions are set, locking_function and threadid_func.... I've written programs which use OpenSSL API. Moreover, I know how to use pthreads. However, the OpenSSL documents are written in the form of a manual, and I can't see a step-by-step guide on what I have to do when using OpenSSL in a multi-threaded app. Is there a tutorial on using OpenSSL with pthreads? (I searched the web, but no satisfactory result appeared.) PS: I'm working in Debian Lenny & Ubuntu Lucid/Maverick. PS2: OpenSSL includes a sample, but it's far too complicated to start with.

  Read the article

• Ruby Strange Error

  - by Ell

  Whenever I require a file in ruby or irb I get this error: LoadError: no such file to load -- (insert any filename).rb from <internal:lib/rubygems/custom_require>:29:in `require' from <internal:lib/rubygems/custom_require>:29:in `require' from (irb):1 from /usr/bin/irb1.9.1:12:in `<main>' It happens even if the file exists I am using ruby1.9.1 and to my knowledge, I have not installed rubygems. I am running on Ubuntu 10.10 Maverick Meerkat. Please help, this problem is very annoying! Thanks in advance, ell. EDIT: I forgot to say that no matter where the file is, even if its in the same directory and definately exists I always get this error.

  Read the article

• Python IDLE: How to type correct indentation?

  - by user2988464

  Mac: Maverick Python: 3.4 I tried to testtimeit module in Python's IDLE import timeit >>> timeit.timeit( "obj.method", """ class SomeClass: def method(self): pass obj = SomeClass() """) When I tried to type def method(self): on the next line of class SomeClass, I hit Tab, it prompted a window showing the files inside my Document directory. So I hit Ctrl+Tab instead. But I still got the error: Traceback (most recent call last): File "<pyshell#26>", line 6, in <module> """) File "/Library/Frameworks/Python.framework/Versions/3.4/lib/python3.4/timeit.py", line 213, in timeit return Timer(stmt, setup, timer).timeit(number) File "/Library/Frameworks/Python.framework/Versions/3.4/lib/python3.4/timeit.py", line 122, in __init__ code = compile(src, dummy_src_name, "exec") File "<timeit-src>", line 9 _t0 = _timer() ^ IndentationError: unindent does not match any outer indentation level Can someone explain: how to fix it, and how to avoid the prompt of My Document appear? Thx!!!

  Read the article

• Tom Cruise: Meet Fusion Apps UX and Feel the Speed

  - by ultan o'broin

  Unfortunately, I am old enough to remember, and now to admit that I really loved, the movie Top Gun. You know the one - Tom Cruise, US Navy F-14 ace pilot, Mr Maverick, crisis of confidence, meets woman, etc., etc. Anyway, one of more memorable lines (there were a few) was: "I feel the need, the need for speed." I was reminded of Tom Cruise recently. Paraphrasing a certain Senior Vice President talking about Oracle Fusion Applications and user experience at an all-hands meeting, I heard that: Applications can never be too easy to use. Performance can never be too fast. Developers, assume that your code is always "on". Perfect. You cannot overstate the user experience importance of application speed to users, or at least their perception of speed. We all want that super speed of execution and performance, and increasingly so as enterprise users bring the expectations of consumer IT into the work environment. Sten Vesterli (@stenvesterli), an Oracle Fusion Applications User Experience Advocate, also addressed the speed point artfully at an Oracle Usability Advisory Board meeting in Geneva. Sten asked us that when we next Googled something, to think about the message we see that Google has found hundreds of thousands or millions of results for us in a split second (for example, About 8,340,000 results (0.23 seconds)). Now, how many results can we see and how many can we use immediately? Yet, this simple message communicating the total results available to us works a special magic about speed, delight, and excitement that Google has made its own in the search space. And, guess what? The Oracle Application Development Framework table component relies on a similar "virtual performance boost", says Sten, when it displays the first 50 records in a table, and uses a scrollbar indicating the total size of the data record set. The user scrolls and the application automatically retrieves more records as needed. Application speed and its perception by users is worth bearing in mind the next time you're at a customer site and the IT Department demands that you retrieve every record from the database. Just think of... Dave Ensor: I'll give you all the rows you ask for in one second. If you promise to use them. (Again, hat tip to Sten.) And then maybe think of... Tom Cruise. And if you want to read about the speed of Oracle Fusion Applications, and what that really means in terms of user productivity for your entire business, then check out the Oracle Applications User Experience Oracle Fusion Applications white papers on the usable apps website.

  Read the article

• What is causing my spacebar to randomly stop working?

  - by Chris Billington

  A couple of times a day, I'll be typing something and realise I can't type spaces. Usually the cursor will flicker instead when I press the spacebar, and I can type all other letters as far as I can tell. If I'm in a terminal the cursor turns from a solid square to an empty square until I release the spacebar. For some reason, restarting compiz with alt-F2 compiz fixes it, until it next occurs. I can still copy and paste spaces from sources that already have them, and I can still insert spaces with ctrl-shift-u, 20, enter. This has been happening for a while, since before I upgraded to maverick, but it feels like its beceoming more frequent. There really doesn't seem to be any kind of a pattern to it. I'm using 64 bit ubuntu 10.10 on a system76 panp7 laptop. Any ideas how I might troubleshoot? EDIT: using xev, normally a spacebar registers as: KeyPress event, serial 36, synthetic NO, window 0x5600001, root 0x101, subw 0x0, time 26488647, (88,403), root:(748,458), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x5600001, root 0x101, subw 0x0, time 26488729, (88,403), root:(748,458), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False But when it's stopped behaving a press of the spacebar instead gives the three events: FocusOut event, serial 36, synthetic NO, window 0x5600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x5600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FURTHER EDIT: Ok, so I think I've solved the problem, and by that I mean I now know which package to file a bug against. I have a hot corner which initiates a window picker, and I've customised the window picking so that left click goes to a window, right click closes one and spacebar zooms in on one. When I go to this hot corner, compiz must take control of my spacebar, and clearly isn't giving it back when I leave the window picker. So I'll be filing a bug against compiz. reported:here

  Read the article

• Distribution upgrade problem "No new release found"

  - by fefe

  I'm using Ubuntu 11.04. The update manager once found the new release 'oneiric', and still shows up this screen when I log on use ssh: Welcome to Ubuntu 11.04 (GNU/Linux 2.6.38-14-generic x86_64) * Documentation: https://help.ubuntu.com/ 0 packages can be updated. 0 updates are security updates. New release 'oneiric' available. Run 'do-release-upgrade' to upgrade to it. Last login: Wed Apr 25 16:22:48 2012 from *** But I didn't upgrade then, and change my apt sources. And now I cannot upgrade to 'oneiric'. do-relase-upgrade shows: $ sudo do-release-upgrade Checking for a new ubuntu release No new release found $ And apt-get dist-upgrade shows: $ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. $ I can successfully update all my packages. File contents of source.list: $ cat /etc/apt/sources.list ## See sources.list(5) for more information, especialy # Remember that you can only use http, ftp or file URIs deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty main universe restricted multiverse deb-src http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty main universe restricted multiverse deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty-security universe main multiverse restricted deb-src http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty-security universe main multiverse restricted deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty-updates universe main multiverse restricted deb-src http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty-updates universe main multiverse restricted deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty-backports universe main multiverse restricted deb-src http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ natty-backports universe main multiverse restricted # deb http://ubuntu.dormforce.net/ubuntu/ lucid main universe restricted multiverse # deb-src http://ubuntu.dormforce.net/ubuntu/ lucid main universe restricted multiverse # deb http://ubuntu.dormforce.net/ubuntu/ lucid-security universe main multiverse restricted # deb-src http://ubuntu.dormforce.net/ubuntu/ lucid-security universe main multiverse restricted # deb http://ubuntu.dormforce.net/ubuntu/ lucid-updates universe main multiverse restricted # deb-src http://ubuntu.dormforce.net/ubuntu/ lucid-updates universe main multiverse restricted # CDROMs are managed through the apt-cdrom tool. # deb http://archive.canonical.com lucid partner # deb http://archive.canonical.com lucid-security partner # deb http://archive.canonical.com lucid-updates partner # deb-src http://archive.canonical.com lucid partner # deb-src http://archive.canonical.com lucid-security partner # deb-src http://archive.canonical.com lucid-updates partner #medibuntu repo # deb http://packages.medibuntu.org/ lucid free non-free # deb-src http://packages.medibuntu.org/ lucid free non-free # deb http://extras.ubuntu.com/ubuntu maverick main #Third party developers repository deb http://mirrors.sohu.com/ubuntu/ natty main restricted multiverse universe deb-src http://mirrors.sohu.com/ubuntu/ natty main universe restricted multiverse #Added by software-properties deb http://security.ubuntu.com/ubuntu/ natty-security universe main multiverse restricted deb-src http://mirrors.sohu.com/ubuntu/ natty-security universe main multiverse restricted deb http://mirrors.sohu.com/ubuntu/ natty-updates universe main multiverse restricted deb-src http://mirrors.sohu.com/ubuntu/ natty-updates universe main multiverse restricted File contents of /etc/update-manager/meta-release: $ cat /etc/update-manager/meta-release # default location for the meta-release file [METARELEASE] URI = http://changelogs.ubuntu.com/meta-release URI_LTS = http://changelogs.ubuntu.com/meta-release-lts URI_UNSTABLE_POSTFIX = -development URI_PROPOSED_POSTFIX = -proposed What may be the problem of this?

  Read the article

• Audio Stutters at gdm

  - by Allan

  Ok I have a problem every 2 times out of 3 I login (I cant be specific it fairly random) I get a Stuttering GDM warning (not the login sound just the Bell sound to wake you up) the only way to stop it is to login I have a Fujitsu Siemens Amilo 1718 with a 2gig of memory (only hardware mod) using 10.10 Maverick and I have disabled KMS as my system was freezing as per the release notes. The only time this has happened before on the same machine was when I gave Kubuntu a try when 10.04 came out then it happened at the login screen and at random times while listening to music in any program. By the way audio is fine as is almost everything else once I have logged in. I would like an answer to this as I am an advocate of Ubuntu and its kind of embarrassing when the first thing that happens is *bing*. as requested Daniel alsa-info Pulse verbose log Not sure how useful the pulse log will be as I cant replicate the bug with a terminal open but I wouldnt be asking the question if I knew the answer so..... Edit 24/12/2010 ......been living on cocktail sausages and pickled onions for five days now made a make shift splint with cocktail sticks..... oops so updated the alsa drivers but I still get the same message in the dmesg No response from codec, disabling MSI: last cmd=0x10a90000 googleing it brings up a forum post from some other distro with a green logo the only common denominator seems to be graphics ie ATI Radeon XPRESS 200M which is why I have had to turn of kms as the chip is so old that small mice try to eat the "kernel" ;) funnily enough following the bug link at the end of the post, I found a comment about "Ubuntu Black Magic" so mabey I am coming at this from the wrong angle...... Bad Joo Joo any one. I will try the second part of Daniels Fix and Update with the result. The final Edit: (Plays air guitar) In the end neither of these solved the problem as such However I have given Roland a tick for reminding me of the solution and I gave Daniel the Bounty for the effort in trying to solve the problem. The answer for future readers was the enable the correct HD Audio Model I found the answer back when using Karmic Koala 9.10 in this forum post Amilo Li1718 Skype - Can't get it working... the model is options snd-hda-intel model=3stack position_fix=1 enable=yes which can be added to the end of alsa-base.conf thanks all for helping and hope anyone with a similar problem will find the answer here.

  Read the article

• Migrating to Natty (or any other future versions of ubuntu)

  - by Nik

  I am hoping that this question would help other ubuntu users when migrating to a newer version of ubuntu. This should have all the info that they need. So please when you answer try to phrase them into points for easy understanding. I understand that some questions that I ask might have been asked before by other users. In that case just provide the links to those questions. I am running ubuntu 10.10 Maverick Meerkat in case that is important. I can say for sure that a clean install is definitely better than an upgrade since it gives you an opportunity to clean your system and get a fresh start. However some of us like to retain certain software configuration or files etc. The questions are as follows, How do you save the configuration files of certain application like for instance Thunderbird, firefox, etc...so that you can basically paste in the new version of ubuntu? (Thunderbird for instance has all my mail, so I definitely would like to backup its configuration and then use it the new installation that I do) I have some applications like MATLAB and Maple (Based on JAVA) installed. When I migrate, can I just copy the entire installation folder to the new version of ubuntu? Would it still work as now if I do that? When doing a backup which folders should be backed up? Obviously your personal files would be backup. But other than that, is it necessary to back up stuff in the home folder, /usr/bin etc? I have BURG installed. I am guessing that would be erased when I do a clean install along with the program's configuration and everything. How can I do a backup of it? I am dual booting my ubuntu alongside with Windows 7. When I perform the clean install of ubuntu, would GRUB (bootloader) be removed and in anyway jeopardize my windows installation? Over time I have added a lot of PPA which are of course compatible with my current ubuntu version. How do I make a backup of all my PPA and would they be compatible to the newer version of ubuntu when I restore them? I hope this covers all the questions or doubts that a user might face when thinking about performing a clean install of his system. If I missed anything please mention it as a comment and I will add it to my answer.

  Read the article

• Why Java's JMF doesn't work in Linux?

  - by Visruth CV

  I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

  Read the article

• How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

  - by chriv

  I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

  Read the article

• Wired connection not being recognized

  - by maxifick

  I'm on Ubuntu Maverick (10.10). I've read a few threads regarding wired connection problems, but haven't found a solution yet. The problem appears after I connect to a wireless network. When I disconnect wireless and plug in an internet cable, the wired connection is not recognized at all. Even the socket appears dead (there are no diodes flashing). The only solution so far seems to be restarting the computer. Network Manager then tries to connect to a Wi-Fi, but the wired connection is listed and working. I've tried sudo restart network-manager, but that doesn't solve anything. After a while, available wireless networks start appearing, but the wired still doesn't. Any ideas? Thanks in advance. Edit: Here is the dmesg output after switching off Wi-Fi and then plugging the internet cable. [18200.623543] Restarting tasks ... done. [18200.648422] video LNXVIDEO:00: Restoring backlight state [18200.707580] sky2 0000:02:00.0: eth0: phy I/O error [18200.707715] sky2 0000:02:00.0: eth0: phy I/O error [18200.707819] sky2 0000:02:00.0: eth0: phy I/O error [18200.707922] sky2 0000:02:00.0: eth0: phy I/O error [18200.708025] sky2 0000:02:00.0: eth0: phy I/O error [18200.708127] sky2 0000:02:00.0: eth0: phy I/O error [18200.708229] sky2 0000:02:00.0: eth0: phy I/O error [18200.708332] sky2 0000:02:00.0: eth0: phy I/O error [18200.708824] sky2 0000:02:00.0: eth0: enabling interface [18200.709587] ADDRCONF(NETDEV_UP): eth0: link is not ready [18202.662422] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18203.324061] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18211.193137] eth1: no IPv6 routers present [18212.844649] usb 5-1: new low speed USB device using ohci_hcd and address 5 [18213.017235] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input16 [18213.017499] generic-usb 0003:0461:4D17.0004: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0 After system restart, dmesg says this: [ 19.802126] sky2 0000:02:00.0: eth0: enabling interface [ 19.802394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.812533] device eth0 entered promiscuous mode [ 21.495547] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.495677] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.496574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

  Read the article

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• ghc6 install trouble: hGetContents: invalid argument (invalid UTF-8 byte sequence)

  - by olimay

  Having trouble installing ghc6 on Ubuntu Maverick via apt. Here's what seems to be the relevant error that comes up when I try to (apt-get|aptitude) install ghc6: A package failed to install. Trying to recover: Setting up ghc6 (6.12.1-13ubuntu1) ... ghc-pkg: /home/opm/.ghc/i386-linux-6.12.1/package.conf.d/unix-compat-0.2-edefa7bced91ebe610d455bab466e200.conf: hGetContents: invalid argument (invalid UTF-8 byte sequence) (Here's the full output, if you're interested: http://paste.ubuntu.com/566475/ ) This still happens after apt-get clean and apt-get update. My searching around has not really helped me understand what's going on, except that it might be caused by a mismatch in locale. So, here's the output of locale too: LANG=en_US.utf8 LANGUAGE=en_US:en LC_CTYPE="en_US.utf8" LC_NUMERIC="en_US.utf8" LC_TIME="en_US.utf8" LC_COLLATE="en_US.utf8" LC_MONETARY="en_US.utf8" LC_MESSAGES="en_US.utf8" LC_PAPER="en_US.utf8" LC_NAME="en_US.utf8" LC_ADDRESS="en_US.utf8" LC_TELEPHONE="en_US.utf8" LC_MEASUREMENT="en_US.utf8" LC_IDENTIFICATION="en_US.utf8" LC_ALL= Any ideas? Additional background: this all seems very strange to me, because I used to have ghc6 installed correctly--I use XMonad as my main window manager most of the time. I tried to install haskell-platform (through apt), which failed and told me that there was something wrong with ghc6, and so I reinstalled ghc6 and began to get the above error message.

  Read the article

• Copy from CDROM is very slow in Ubuntu

  - by ???

  I'm using the command to copy CDROM image: # dd if=/dev/sr0 of=./maverick.iso But it's very slow, at about 350k bytes/sec. I've searched the google, and try the command # hdparm -vi /dev/sr0 /dev/sr0: HDIO_DRIVE_CMD(identify) failed: Bad address IO_support = 1 (32-bit) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=DVD-ROM UJDA775, FwRev=DA03, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Seems like DMA is already on. And a device test gives: # hdparm -t /dev/sr0 /dev/sr0: Timing buffered disk reads: 2 MB in 6.58 seconds = 311.10 kB/sec # sudo hdparm -tT /dev/sr0 /dev/sr0: Timing cached reads: 2 MB in 2.69 seconds = 760.96 kB/sec Timing buffered disk reads: m 4 MB in 5.19 seconds = 789.09 kB/sec The CD-ROM device and disc should be okay because I can copy it very fast in Windows, using UltraISO utility. So I guess there is something not configured right in Ubuntu, is it?

  Read the article

• Debootstrap Ubuntu over NFS leads to mknod I/O error

  - by Aaron B. Russell

  Hi everyone, I'm trying to prepare an Ubuntu environment for a diskless machine that will PXE boot and mount an NFS share as it's root. I've currently got another Ubuntu machine mounting the NFS share and I'm trying to debootstrap into it, but it has trouble creating devices over NFS: root@kimiko:~# mount | grep Seiuchi 192.168.0.203:/mnt/user/Seiuchi on /mnt type nfs (rw,addr=192.168.0.203) root@kimiko:~# debootstrap --arch i386 maverick /mnt http://gb.archive.ubuntu.com/ubuntu/ mknod: `/mnt/test-dev-null': Input/output error E: Cannot install into target '/mnt' mounted with noexec or nodev My NFS rule on the unRAID server is 192.168.0.201/32(rw,no_root_squash,sync). I don't have the noexec or nodev options set. I've not got much experience with NFS, so I'm probably missing something basic in the way I'm sharing this, but my attempts at Googling for an answer isn't really turning anything useful up. Does anyone have suggestions on what I might have missed or maybe relevant docs? Edit: Creating normal files (and directories) works just fine, I just can't create devices... root@kimiko:/mnt# mkdir foo root@kimiko:/mnt# cd foo root@kimiko:/mnt/foo# touch bar root@kimiko:/mnt/foo# mknod quux c 4 64 mknod: `quux': Input/output error root@kimiko:/mnt/foo# ls bar

  Read the article

• Cannot access firewalled jboss server from Internet Explorer

  - by Simon Gibbs

  I've produced a website for a client One Single Menu using JBoss and hosted it on Rackspace Cloud Servers running Ubuntu's Maverick Meerkat. Following advice, I esablished some iptables rule to protect jboss: iptables -I INPUT 1 -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -t nat -A OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -A INPUT -j DROP Now, several versions of IE on several computers on at least two different ISPs cannot access the onesinglemenu.com. Curl from within the datacenter, Firefox, and Safari on the same ISPs can all access the server fine. I even tried IE and Firefox on the same computer and IE failed but Firefox worked. The error behaviour is that IE hangs on connecting without reporting an error, even after a minute or so. No page is displayed at all. I find it quite odd that I'm having a browser specific connection issue, but it appears to be the case. Help!

  Read the article

• Setup: Eclipse in Ubuntu with Apache2 and Subversion

  - by Ricalsin

  Trying to setup Eclispe. I am running ubuntu 10.10 (Maverick). Apache2.2.16 Subversion 1.6.12 The Eclipse help/about/installed software says: Eclipse Platform 3.5.2 Subclipse 1.0.0 Version Control with Subversion 1.1.1 The Subclips wiki I followed is here I have installed the libsvn-java app as discussed. I added the line "-Djava.library.path=/usr/lib/jni" to the eclipse.ini file I checked the Eclipse help/about/confirguration settings and both of these lines are listed: eclipse.vmargs=-Djava.library.path=/usr/lib/jni java.library.path=/usr/lib/jni I checked that those files are in those directories. Still, when I check the preferencesteamsvn an error dialog shows: Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl.1 in java.library.path Incompatible JavaHL library loaded 1.3.x or later required I followed the "Testing JavaHL libraries" troubleshooting section at the bottom of the wiki: I downloaded the tarbal and ran it in a folder on my desktop with no problems. Then, I followed the instructions and placed that file INSIDE the path (usr/lib/jni/testJavaHL) and ran it from there. There are 50 tests performed and each one of them came back with this same error (posting only one for brevity): 50) testCommitRevprops(org.tigris.subversion.javahl.BasicTests)java.io.FileNotFoundException: /usr/lib/jni/testJavaHL/local_tmp/greek_files/iota (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:209) at java.io.FileOutputStream.<init>(FileOutputStream.java:160) at org.tigris.subversion.javahl.WC.materialize(WC.java:70) at org.tigris.subversion.javahl.SVNTests.buildGreekFiles(SVNTests.java:303) at org.tigris.subversion.javahl.SVNTests.setUp(SVNTests.java:222) at org.tigris.subversion.javahl.RunTests.main(RunTests.java:111) FAILURES!!! Tests run: 50, Failures: 0, Errors: 50 Any ideas as to how/why the "local_tmp/greek_files/iota" is appended to the directory? I assume that's my problem.. I'm also having a problem with newrepository location = ...as the directory location of my svn repository is one level above the home directory - which is prepended to whatever I place in the dialog box - resulting in this error: svn: '/home/ricalsin/file:/home/svn' does not exist Thank you for any help.

  Read the article

• Ubuntu - No gnome-panels, no right-click, no internet, no hotkeys

  - by Darthfett

  Hey guys, I've been using Ubuntu (Maverick 10.10) on my desktop (ATI Radeon 5830) for about 3 weeks now, but all of a sudden I am unable to even use my computer. As soon as I start up, I see my desktop, with icons, but I don't see any gnome-panels, and I'm unable to get any options if I right-click. I can start programs by double clicking them. I also cannot get an internet connection. I've tried restarting gnome-panel by killing it, using Ctrl+Alt+5 to switch to a terminal (I don't have a shortcut to one on my desktop, and no hotkeys will work), but no luck. Restarting my computer has no effect upon this (I have to manually cut the power, since I don't know the terminal command). As far as I know, I have not made any changes, and I've never had any problems in the past. This started when I was playing Minecraft, but my internet crapped out, and no amount of re-trying the connection would work. I know it was my computer, as my brother's was working fine in the other room. Any clues as to what's going on? I'm more than willing to troubleshoot.

  Read the article

• Ubuntu 10.04->10.10 in failed state - how to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: (1) "Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a)." (2) "gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok]" (3) "gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ..." What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

< Previous Page | 7 8 9 10 11 12  | Next Page >