Search Results

Search found 11124 results on 445 pages for 'optical drive'.

Page 11/445 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Ubuntu 10.10 USB drive not showing

  - by Ben

  USB is detecting but not showing the drives or mount details. Nothing there inside my /media folder and /mnt folder. I already enabled automatic mount and give privilege to user also. My sudo fdisk -l shows like: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3ba7 Device Boot Start End Blocks Id System /dev/sda1 * 1 29637 238053376 83 Linux /dev/sda2 29637 30402 6142977 5 Extended /dev/sda5 29637 30402 6142976 82 Linux swap / Solaris Any idea?

  Read the article

• Ubuntu not booting from USB on laptop (no optical drive)

  - by Jamie

  I'm using a Kingston 16GB USB, with the Unetbootin program. (I've tried both downloading the installation iso manually and adding it, or using the program to download.) I've tried creating the bootable USB on an iMac, the laptop and also a desktop. I've booted into the setup of the laptop and changed the boot order to make sure it boots from that drive first. (There is no optical drive so that isn't a problem.) It's an Acer Aspire AS3810TZ. Upon booting it gives this message: SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al I get this no matter how I create the USB, it just sits there. I left the laptop for an hour and it hadn't moved. I've also tried on a different 4GB USB (Generic) and that did the same.

  Read the article

• how to install Ubuntu on a fresh hard drive

  - by Herman Wiegman

  I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

  Read the article

• My Hard Disk Drive is not visible until I use it

  - by Matthew

  So, suddenly something went wrong. At the beggining of my Ubuntu usage it was all right, but from about 2-4 weeks I've got this problem: Whenever I try to reach my HDD, i have to open it first by files explorer. Example: I use text editor. Last file fails to load, so I got to open it manually. It's in bookmarked file. I want to reach my bookmark, which is on HDD(partition for both Ubuntu and Windows , NTFS). If i want to reach my bookmark, i have to go there manually(or at least to HDD, then bookmarks pops up). It also doesn't appear at my side bar until i use it. It kinda looks like it wasn't mounted till then, I don't know. It would be nice if I could deal with it, let's say, automatically. Thanks in advance.

  Read the article

• how to map a network drive [duplicate]

  - by acquacheta

  This question already has an answer here: Correct way of mounting a Windows share 1 answer I hope someone can help me.. I'm trying to connect with my university remote filestore, but I can't make it work.. Here is explained what to do on Windows or Mac, and here I found a guide about how to do it with ubuntu, but it's not working to me (at the end of all the steps, I can't access to the mounted folder). I can access to the storage through Konqueror (I'm using KDE), but I would like to access to it also without it. Any suggestion?

  Read the article

• Need help to install persistent Ubuntu on USB drive

  - by Junior

  I am a new user of Ubuntu. I would like to install a persistent Ubuntu 11.04 to my USB stick, and it should be able to work as a guest OS running on Windows so that I can boot it on other computers other than the one which I used for the installation. I have used several creators such as unetbootin, however from my understanding it can only create Live Linux which I am unable to save my configurations and files. If it's possible I would like to bypass the BIOS, that is to say that I can just load from the virtual machine without having to restart the computer. Thanks in advance!

  Read the article

• Getting windows 7 to boot from external hard drive. Using Ubuntu

  - by SMS

  I have Ubuntu 12.04LTS as my current operating system, and I have a Windows 7 iso on a disk. I'm using an external hard drive because my internal hard drive has become damaged. I need to get Windows to install onto my external hard drive (where Ubuntu is as well). The iso disk will not install windows to the hard drive. Can anyone help guide me through the process of getting windows on the external?

  Read the article

• Can't open any of my drives/devices(not USB drive)

  - by Anontu

  I can't open any of my computer drives (:c/,:d/.....) Every time i tried to open the drives, the following notice appeared: (i'm new in Ask Ubuntu,so,i can't upload the snapshot,i need 10 reputations to do that) **Unable to access "__ Volume"** error mounting/dev/sda7at/media/MyPC/__Volume:Command-Line 'mount-t "ntfs"-o "uhelper=udisk2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177""/ dev/sda7""/media/MyPC/__Volume"' exited with non-zero exit status 14:The disk contains an unclean file system (0,0).| Metadata Kept in Windows cache,refused to mount. Failed to mount '/dev/sda7':Operation not permitted The NTFS partition is in an unsafe state.Please,resume and shutdown Windows fully(no hibernation or fast restarting),or mount the volume read-only with the 'ro' mount option. I have Windows side by side Ubuntu 13.04 in my computer and i have done (like-Shutting down Windows properly...) things as these in the notice. But it's not working.

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Plugging in USB flash drive only shows error 43, "Unknown device"

  - by Daren

  My friend saved by his works onto my flash drive which was detectable/openable, but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: On Vista Home Premium (his computer): Uninstalled -- Restarted computer -- Re-installed (ERROR 43) On Windows 7 (my computer): Uninstalled -- Restarted computer -- Can't install (ERROR 43) It seems that my computer (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" have caused the problem?

  Read the article

• DVD-RW Drive not recognizing a DVD+R disc

  - by unknown (yahoo)

  Hi everyone, I am having trouble burning DVD+R disc's. My OS is vista and i have used this burner and these same discs in the past. I haven't had the need to do so in months and now that i come back to create some backups my DVD/RW drive doesn't recognize a brand new DVD+R disc. These disc are the same ones i have used in the past(Same Pack even). Anyone have any idea what this might be. Maybe a vista upgrade or something that i downloaded in the last few months that could have thrown something off? Thanks in advance.

  Read the article

• Performance hit with new hard drive?

  - by aaaidan

  I've recently upgraded my laptop's internal hard drive from a 160GB to 1TB drive. I cloned the drive, then installed it. The general system performance seems appreciably slower. In particular application launches seem to take much longer. Is this possible, or am I just expecting too much from the new drive? It's running a Macbook Pro which is a couple of years old. Any ideas? 160 GB 7MB cache 5400 rpm NCQ (Hitachi HTS545016B9SA02) -- original drive 1 TB 8MB cache 5400 rpm SATA300 NCQ (Western Digital WD10TPVT-00HT5T0) Sisoftware links: Hitachi HTS545016B9SA02 Western Digital WD10TPVT-00HT5T0

  Read the article

• IDE <-> SATA Adapter Issue - Hard Drive Not recognized

  - by nicorellius

  I was trying to use one of these IDE to SATA adapters (Syba SD-ADA50016 IDE/SATA Converter Bi-directional IDE to SATA) and I connected a working hard drive (Seagate Barracuda 500 GB SATA 3.5 Inch 7200 RPM Version 12 Desktop Internal Hard Drive ST3500418AS). I could get the drive to be recognized by the BIOS, but I couldn't boot a Linux disc or install to the drive. I tried to install pfSense to this drive and the install failed because the setup couldn't recognize the file. Has anyone heard of these adapters giving trouble and/or not working properly? I would like to be able to use this device for newer drives on older boards.

  Read the article

• Serve up PC hard drive as USB mass storage

  - by sheepsimulator

  Is there a software package available that can serve up a hard-drive internal to a PC and make it available over USB to other USB Master nodes as mass storage? Ex: take your C: or /dev/hda drive on a PC (let's call the computer PC-A), and run a driver program which makes your C: or /dev/hda drive available to external devices as USB mass storage. When you'd hook up another PC (PC-B) to PC-A via USB, it would detect a USB mass storage device, which is C: or /dev/hda on PC-A. Is this even possible? EDIT: I know that there are other ways of making data on a drive available between two different computers (eg. putting PC-A's hdd in a USB-drive-enclosure, or having PC-A make the hdd available via a network share). But I'd like to know if the method that I describe above is even technically possible.

  Read the article

• Recover data from an ''unpartitioned'' hard drive

  - by Rafael S. Calsaverini

  I'm trying to recover data from a hdd for a friend from work. He was using it on an old win98 PC (so I guess it was a FAT 16 filesystem). When he installed the drive on a new PC his Windows XP can't recognize the filesystem and give an error message saying that the drive is unformatted. I tried to mount the hdd under linux but no partitions appear to be associated with the drive (I have only /dev/sdb associated with that drive and no /dev/sdb1 or sdb2 etc). I've found many articles on the web on how to recover partitions (with scripts like dd and ddrescue) but how do I make it when I have no partitions and the system say my drive is unpartioned? Is it possible to create a new partition without loosing the data?

  Read the article

• Splitting a drive which has layout as mirrored and type as dynamic

  - by shiva

  I have a C drive/volume in my server with layout = mirror and type =dynamic and status as healthy(boot,pagefile,crashdump). I have some questions regarding this configuration: I think it is a raid configuration.Please correct me if I am wrong. I read that, mirroring is nothing but raid-1 configuration. All my software and OS is in this drive. I want my software to be in a separate drive, but I am not sure if I can create a separate drive from the above mentioned c drive. I want to know: a. If I can do it and how ?(using disk management) b. If this is a right approach ?

  Read the article

• Windows 8.1 installation: Which drive is the F drive?

  - by sammyg

  I am doing a clean install of Windows 8.1 on an old PC. It was purchased as download from Microsoft Store and written to and booted from a USB flash drive. It went through all of these steps: Copying Windows Files Getting files ready for installation Installing features Installing updates Then at "Getting finished" I am stuck at this stupid dialog box. Please unplug the following external drive and click OK to restart your computer and finish installing Windows. F: How do I tell what physical drive this is? Can I drop to command prompt during installation? And is it safe to unplug it while powered on? There is no external hard drive connected, none that I can see. There is no USB or FireWire drive connected externally. I think it sees one of the internal drives as external... in some weird way?!

  Read the article

• Error message when renaming files on a network drive stored in Windows 7 favorites

  - by paulmorriss

  I have a network drive mapped to a share on a Window Server 2003. I have a shortcut to this drive stored in my Windows 7 favorites. When I double click the shortcut and then rename a file on the drive, if the file is longer than 8 chars or contains spaces then I get this error The drive that this file or folder is stored on does not allow long file names, or names containing blanks or any of the following characters:... If I get to the network drive by click on it in the tree under computer then it works fine. Is there a way to get round this?

  Read the article

• Writing to external drive runs out of space prematurely

  - by steve

  I have a USB 2.0, 500 GB HDD. I am writing a bunch of data to it, that I previously recovered from the drive. I have formatted the drive in exFAT, since the drive will be used with Windows and OSX. At first, I tried using Windows explorer to move the files over to the drive (about 160 GiB worth) but after copying about 30% of the data (according to TeraCopy), Windows Explorer reported the drive as out of space, and that it was completely full. WinDirStat only showed the size of data that had been copied over... Where did this extra space go? Why is there a 300+ GiB discrepancy between the usage reported by the files and what Explorer sees?

  Read the article

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• Hard drive placement

  - by zm15

  I'm a video editor working with large HD files. I am building a new computer and need some help. I will be running 2 hard drives. One with the operating system and all the programs. And one with all the project files I will be working from. I am keeping these seperate. I will be purchasing a 10k rpm hard drive. So i will have a 10k rpm drive, and a 7200rpm drive. Should I put the OS on the faster drive, or put my working files on the faster drive?

  Read the article

• Syncing Large Directories/Filesystems using USB Drive [closed]

  - by Alan Lue

  Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

  Read the article

• EXT4 external hard drive for use with multiple systems

  - by EXTdumb

  I recently bought a external hard drive to store some data on. I use Linux but I am not a power user. If I format the drive to EXT4, is it possible for the permissions to ever screw up and I lost access to my data? I will be plugging the drive into several different linux based computers at work and I frequently hop distros on my main home machine. I need to make sure I don't lose any data because I overlooked something. I am not familiar with EXT 3 or 4. So far I have done this : Formatted drive to EXT4 ran gksudo thunar and changed the permissions to my user account and all settings to read/write Wrote all the files I need to the drive I really appreciate any help.

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

• My new Xbox 360 drive doesn't show up

  - by RobbieGee

  I bought an Xbox 360 Arcade version a while ago and today I got a 120GB drive from a shop that had a closedown sale. I put the drive on the side as per the picture on the back side of the drive. When I go to settings and look at memory, it only finds the built in memory chip, not the harddrive. Am I doing it correct? I have almost never used my Xbox so I'm not sure if there's anything more to it. I don't think I fitted the drive wrong either, it seems pretty much impossible to do it wrong. The box came with only the drive, it doesn't have any transfer kit or the likes.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >