Search Results

Search found 27973 results on 1119 pages for 'power point vba'.

Page 11/1119 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • External hard drive that gets its power supply from the PC.

    - by AngryHacker
    I need an external drive to connect to my MacMini. I've been using an 80gb 2.5 drive in an enclosure and it's fine, but now I need a 1.5TB drive. Unfortunately all the 1.5TB drives I found need a separate power supply. I'd like it to be able to feed its power off the USB drive (just like my 80gb drive does). Does something like that exists?

    Read the article

  • Power and Cooling Cost compared with Server/Hardware Cost

    - by psaccounts
    Has anyone done, or is aware of any, calculations to compare the cost of power and cooling compared to the cost of hardware (servers) in a typical data center? This is to compute a true total cost of ownership of self-hosting servers. Of course real TCO includes: hardware_cost + power + cooling + rental + human_cost + maintenance Is there any study that says something like (TCO - hardware_cost) = 40% of hardware_cost in 3 years? Any pointers will be appreciated.

    Read the article

  • Cannot find Power Management Tab in XP

    - by Andrew Heath
    I have the problem that when I send my computer to sleep it wakes if you bump the table, floor, burp etc. I have read many threads that say go to Device Manager Mouse Properties Power Management Tab and uncheck the box for wake. My problem is I do not have a Power Management Tab! Anyone know how to enable the tab or stop the mouse from waking my machine? And no, turning it upside down doesn't work either!

    Read the article

  • No power to HP pavilion dv 1000

    - by Imajica666
    I am working on a friends laptop. I get no power indicator light while plugged in to ac outlet. Will not power on with just the battery. Might this be a case of replacing the system board? I have never broken open a laptop so I am not sure what the best path to take might be. Thanks for any opinions.

    Read the article

  • How to permanently save power options in windows 7

    - by Ieyasu Sawada
    How can I set the hard disk to never turn off permanently?And the sleep to never, together with the hibernate. Because the options resets to their default values when I turn off, log off or restart my computer. I am using granola on my laptop and it is set to lowest speed. When I restart it turns to full power again. Does it have something to do with the power options resetting to their default values?

    Read the article

  • Raid 5 and Power Supply damage?

    - by Tronic
    Hi. Because I build a RAID 5 atm, I wanted to ask, what would happen if the server with a raid 5 in it (like 4-5 hdds) would have a power supply damage? Can I just switch the power supply and my data is safe and backup again or will there be a raid damage as well? Thanks in advance. Regards.

    Read the article

  • Power supply for HP Workstation xw4100

    - by Nathan Adams
    Does anyone know if the HP Workstation xw4100 takes a "special" power supply? I know there was a time when everyone was using their own PSs with different pinouts, but I was under the impression that enough people complained and all the companies switched to standard power supplies.

    Read the article

  • MB with CPU and power supply - can be turned on but not off

    - by COcodrilo
    Hi, Not sure whether this question belongs here, I hope so. I have just bought a motherboard and CPU. I have installed the CPU, cooler and connected to CPUFAN on the MB. I have plugged the power supply to MB and the cable from "ON" button to pins named "PWR" and the LEDs. However when I turn on the PC, both HDD and POWER leds are continously on and the PC cannot be turned out. What could I be missing?

    Read the article

  • MB with CPU and power supply - can be turned on but not off [closed]

    - by COcodrilo
    Hi, Not sure whether this question belongs here, I hope so. I have just bought a motherboard and CPU. I have installed the CPU, cooler and connected to CPUFAN on the MB. I have plugged the power supply to MB and the cable from "ON" button to pins named "PWR" and the LEDs. However when I turn on the PC, both HDD and POWER leds are continously on and the PC cannot be turned out. What could I be missing?

    Read the article

  • Reason behind system power usage?

    - by user28565
    Hi, when the number of applications running in a pc increases, the power consumed by the PC is also increasing. Is this correct? I think the reason behind this is CPU. Please let me know what role the CPU plays for more power usage. Thanks, Kavi

    Read the article

  • How Can I Test My Computer’s Power Supply?

    - by Jason Fitzpatrick
    You’re concerned your computer troubles stem from a failing (or outright fried) power supply unit. How can you test the unit to be sure that it’s the source of your hardware headaches? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Sam Hoice has some PSU concerns: My computer powered off the other day on its own, and now when I push the power button, nothing happens. My assumption would naturally be that the power supply is done (possibly well done) but is there any good way to test this before I buy a new one? How can Sam test things without damaging his current computer or other hardware?   The Answer SuperUser contributor Grant writes: Unplug the power supply from any of the components inside the computer (or just remove it from the computer completely). USE CAUTION HERE (Though you’d only be shocked with a max of 24 volts) Plug the power supply into the wall. Find the big 24-ish pin connector that connects to the motherboard. Connect the GREEN wire with the adjacent BLACK wire. The power supply’s fan should start up. If it doesn’t then it’s dead. If the fan starts up, then it could be the motherboard that’s dead. You can use a multimeter to check if there is power output from the power supply. Adrien offers a solution for readers who may not be comfortable jamming wires into their power supply unit’s MOBO connector: Most well-stocked geek-stores sell a “power-supply tester” that has all the appropriate connectors to plug each part of your PSU into, with spiffy LEDs indicating status of the various rails, connectors for IDE/SATA/floppy power cables, etc. They run ~$20 US. With a little careful shopping you can even find a highly-rated PSU tester for a measly $6. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Fiber Channel Loop vs Point to Point

    - by RandomInsano
    So, I'm playing with a couple of QLogic QLA2340s connected directly together. I've got options here to either have them act as a loop, or in point to point mode. What's the difference if I'm only going to have two machines connected together? Is point-to-point more efficient? The firmware has an option to prefer loop, then fall back to p2p. Anyone have any idea if there are performance benefits or drawbacks? It's pretty hard to find that information.

    Read the article

  • How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

    - by joechip
    I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

    Read the article

  • Static background noise while using new headset Ubuntu 13.04

    - by ThundLayr
    Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

    Read the article

  • Linksys WAP54G v3.1 no access, power and link LED solid

    - by user142113
    I'm managing the Network of a small enterprise. A Linksys WAP54G v3.1 used to provide the WiFi network. I was called, because the device did not provide a WiFi network anymore. I first of all tried to ping the device via LAN, but there was no reaction. I've frequently reconnected the AP to the mains and always the POWER and the LINK LED keep solid, even if no network cable is connected. What I've done yet: Reset as documented: Pressed the RESET button for 10 seconds. After that I have tried to access the AP with a direct cable connection to my computer, that I've set to a static ip of 192.168.1.240, but i got no ping response on the default IP 192.168.1.245. Furthermore ipconfig reports "media disconnected". More complex reset method as described here http://bruceshankle.blogspot.de/2005/12/how-to-reset-linksys-wap54g.html as well had no effect. also tried to ping 192.168.1.1 without success Tried this method: http://www.daniweb.com/hardware-and-software/networking/threads/142437/linksys-wireless-access-point-problem#post680245 but there was no ping response when powering up. As well the tftp transfer timed out Finally tried to short pin 15 and 16 of the flash chip on the bottom side of the AP mainboard while booting to provoke a Checksum error. This should lead to the possibility to upload a firmware with tftp, as the AP stops booting and waits for a tftp connection on 192.168.1.1. But I've had no success. As well i've put pin 15 and 16 to ground while booting, also without an effect. After all that I still can't ping the AP, ipconfig still tells me "media disconnected". The POWER and LINK LED are solid. I would appreciate your answers

    Read the article

  • Computer does not switch on after power outage

    - by cristian
    VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

    Read the article

  • Dell PS/2 Keyboard Stops Working Randomly After Power Disturbance

    - by Kenneth Murphy
    I have a Dell PS/2 keyboard connected to a desktop PC running Slackware 12.2 & Windows XP. After a recent, brief power outage/disturbance at my home, the keyboard has begun to quit working at random times. It has stopped at POST, but not by keyboard error -- I have to press the F1 key to continue booting, and at times the keyboard has already stopped working. Other times, the keyboard will work perfectly for a long time (a day or more) before it finally quits. It has stopped at boot, in Windows XP, and in Slackware. The led lights continue to work regardless. I have tried another PS/2 keyboard and it seems to be immune to this problem. The USB mouse always works. Does anyone have any ideas about how this might have happened? If this is related to the power disturbance that killed the power to the running PC, is it feasible that it would have only fried the keyboard itself (which still works sometimes) and not the PS/2 port nor anything else? I have experienced no other problems since the event.

    Read the article

  • Some Power Supply Cable Questions?

    - by jasondavis
    I am building a new PC and I haven't done this in a few years. It will have all the latest tech stuff. I got my PSU in the mail and I am looking over the cables (it has a lot) I thought it was a mudular PSU so I could only use the cables I need but instead it is a hybrid (some wires attached and some can be added/removed instead of all of then being removable). 1) So I am curious, I believe all my hard drives and optical drives are powered off of a sata power cable so does that mean I probably do not need any of the 4 pin molex cables? Or are these used for other things? 2) I know the 24-pin cable goes to my motherboard. 3) I have some 6-pin cables that are labeled pci-e which is new to me. I read these are for some grapghic cards and stuff. I have 2 grapghic cards but they do not require a seperate pci-e power wire be hooked to them. So are these pci-e wires just to power pci-express cards? Or for other things as well? 4) I have a 4pin ATX 12v wire, what is this for? 5) 8 pin EPS, what is this for?

    Read the article

  • Where do SATA drives get their power when using a PCI SATA controller on oler PCs?

    - by Sukima
    I've been looking into PCI SATA controller cards online for an older PC and noticed that the ports only have the SATA cable connector and the Power supply does not have the SATA power connectors. I also had a few external eSATA drives which don't power up unless I also plugin the USB cable. Therefore I realize that SATA and eSATA do not carry power and need power else where. When converting older PCs to use a PCI SATA controller how do you provide power to the SATA drives? Anticipating the answer to be some kind of converter cable (which I was unable to search for) then can older power supplies handle added drives? (Assuming a 4 port SATA controller means 4 more drives the power supply has to endure). Or do you have to get a second poer supply and kinda jerry-rig it into an old case?

    Read the article

  • Outlook 2007 VBA/Macro

    - by user27538
    Hi, I am a very basic user new to macros and vba. My problem is that I recive online orders to which i need to click an auto generated unique order hyperlink to confirm receipt of the order within a specified time period. This is a mundane task having to be on 'standby' and was wondering if there was a way to have this link automatically clicked when the email arrives. Just to reiterate the link has a unique reference and is different on each email. Please bare in mind that I am a very basic user and would probably require step by step instructions. Many thanks in advance

    Read the article

  • Insert Hyperlink via VBA

    - by Martin
    I have a Word VBA macro that loops through a directory and writes down the file path of files selected for some criteria into a new Word document. Works well as plain text (as part of a loop): wdDocResults.Content.InsertAfter objFile.Path & Chr(13) However, I'd like them to be hyperlinks. The following works as single macro, but when called from within another script, it does nothing at all (no matter if path is provided as variable or string, or as H:... or \\MyServernameAsNetDrive...): ActiveDocument.Hyperlinks.Add Anchor:=Selection.Range, Address:= objFile.Path, _ SubAddress:="", ScreenTip:="", TextToDisplay:=objFile.Path If try to select the current line in order to make sure something is selected at the right place -- error: out of memory": wrdDocResults.Content.InsertAfter objFil.Path Selection.Expand wdLine ActiveDocument.Hyperlinks.Add Anchor:=Selection.Range, Address:= objFile.Path, _ SubAddress:="", ScreenTip:="", TextToDisplay:=objFile.Path I also tried inserting a string resembling the Hyperlink field code ({ Hyperlink "..." }, which is of course not recognized... Any help is appreciated... Thanks in advance!

    Read the article

  • Need to pull data from website after every 5 seconds using Vba

    - by Milton
    I need to pull data from www.dsebd.org after ever 5 seconds. this Vba code pull data but does not run automatically. Please help me. Sub ButtonCode() ' execute macros Call GetCotton ' submit macro to run again in 5 sec Application.OnTime Now + TimeValue("00:00:05"), "ButtonCode" End Sub Sub GetCotton() Dim xml As Object Dim html As Object Dim elemcollection As Object Dim result As String Dim t As Long, r As Long, c As Long, ActRw As Long Set xml = CreateObject("MSXML2.XMLHTTP.6.0") With xml .Open "GET", "http://www.dsebd.org/dseX_share.php", False .send End With result = xml.responseText Set html = CreateObject("htmlfile") html.body.innerHTML = result Set elemcollection = html.getElementsByTagName("table") For t = 0 To elemcollection.Length - 1 For r = 0 To elemcollection(t).Rows.Length - 1 For c = 0 To elemcollection(t).Rows(r).Cells.Length - 1 ThisWorkbook.Sheets("Sheet1").Cells(ActRw + r + 1, c + 1) = elemcollection(t).Rows(r).Cells(c).innerText Next c Next r ActRw = ActRw + elemcollection(t).Rows.Length + 1 Next t End Sub

    Read the article

  • PSU aka Power Supply won't turn off and No Power_Good - Safe to keep using?

    - by Tek
    The title is the symptoms of my problem. I mainly chose this title for search engines so people can know why this is happening since I see a lot of uncertainty when it comes to this problem. I do have a question related to the source of the problem though. First of all, Inserting the power to the power supply automatically turns on my computer. Using a power supply tester, the tester automatically turns on without me having to push the button to test the PSU. lol. The PG (Power Good) signal is missing. The strange thing is my computer still turns on (OS boots, etc) considering a missing power good signal. Is it really that unsafe to use the power supply when it's missing the power good signal? All the voltages seem to be in check. Here's a picture: Power Supply Tester Readout And by safe (considering the readout) in the sense that is it likely my components (cpu, mobo, etc) could be damaged?

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >