Search Results

Search found 13082 results on 524 pages for 'recovery mode'.

Page 11/524 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • Recovering Pictures & Movies from Formatted Memory Card

    - by Donotalo
    I thought I've copied all of the pictures and videos that I've taken using my digital camera Canon Digital IXUS 860 IS to my computer. Then I format the memory card. Then I found I didn't take all of the files! I don't have any other means of connecting the memory card to computer except via the camera. But the camera doesn't show it as a removable device directly in my computer so programs like Glary Utilities and PC Inspector didn't find the drive. I didn't take any picture after I formatted it. Is there any free software that can help me to get the pictures and videos? My memory card is an 4 GB SDHC card. Thanks.

    Read the article

  • Recovering with DDRescue Cannot Complete (write error: Read-only file system)

    - by c00lryguy
    I'm trying to recover a corrupt VDI using vdfuse to mount the VDI and using dd_rescue to rescue the borked partition. dd_rescue seems to be working fine but once it reached about half of the partition, it just STOPs and gives the following error: ddrescue: write error: Read-only file system Wait.. what? It suddenly turns the FS it is writing the recovered partition to into a read-only file system. Well... why? Will I never be able to finish this? What's going on?

    Read the article

  • XP Mode in Windows 7 professional recently ceased to work

    - by Ian FLetcher
    I have used Windows XP Mode in Windows Professional 7 once a week for around 2 years to run Quicken 98. About 2 weeks ago the XP Mode completely stopped working. I get different responses when I try to launch. I can sometimes see a launch screen for XP (which I never used to get) which then hangs Sometimes I just get a black screen Sometimes I get an error message in a cmd like interface that says "windows could not start because the following file is missing or corrupt \system32\ntoskrnl.exe please reinstall a copy of the above file. I have noticed that in the tools tab at the top of the screen "enable integration features" is greyed out. Any recommendations? Ian

    Read the article

  • Is there any way to recover files in /usr/local directory on Ubuntu?

    - by Ilya
    We are running Ubuntu server on VPS. Some files were removed accidentally by placing unnecessary space this command: rm -r /usr/local <directory to be deleted> I know, that in most cases this directory is used by packages to place some part of their content. Is there any where to recover deleted files and directories? I suppose, that theoretically it should be possible. Some software can look through the list of installed packages, check presence of files in file system and recover or reinstall corrupted packages if their file are missing in /usr/local.

    Read the article

  • Can I recover a rm -rf-ed Mercurial repository?

    - by WishCow
    I made the mistake of wiping out my entire project directory with a quick "rm -rf project". Of course, the .hg directory went with it. I had about 15-20 changesets, that I have not pushed to anyone, and I would really really like to get those back. The system is a Ubuntu machine, and the partiton where the delete happened is ext3, the project consist mostly of PHP files. I know about the guideline to not write to the disk in question. The first idea was to use the tool named scalpel, to get the PHP files back and diff them with the current version from the repo, and somehow carve the changes out. While it succeeded, it did not recover the file names (or there is a switch I'm missing), so I'm left with a few thousand sequentially named .php files, combing through them is not an option. Can a kind soul please save me, and suggest a way to: a) get the repo back, or b) get the files back, with filenames For those wondering how I did such a stupid thing: I was working on a file in Vim which I wanted to remove from the repository: :!hg rm % This complained that the file is in a subrepository, so I specified the following: :!hg rm % -R engine which complained that file has modifications, use -f to force. And this is when somehow, I made up the following command: :!rm -rf % -R engine Somehow, seeing "force" makes me do a rm -rf by reflex.

    Read the article

  • Need decent undelete utility for Windows

    - by Michael Chermside
    So I get the phone call from a friend or relative or client: "Looks like I accidentally deleted 4 years worth of accounting data. Oh, and I don't have any backups. Can you help?" What I need is a good Windows tool (for NTFS I think) that scans blocks marked as deleted and attempts to recover the file. And I need one that can be run from a thumb drive or since installing new software has a decent chance of overwriting the data before it can be recovered. Googling for such tools turns up mostly carefully-crafted advertisements for moderately expensive products with a "Free! Demo! Version!" which is not exactly reassuring. Any recommendations for a good tool?

    Read the article

  • Mac won't boot into safe mode

    - by Stephen
    Mac boots fine normally, except when in safe mode. Holding down shift when booting gets me to the progress bar on the grey screen. Progress bar gets about half way before mac reboots. I modified nvram boot-args to get a better look: sudo nvram boot-args="-x -v" It definitely gets through fsck, skips loading kernel extensions (since it's in safe mode), does something with the network interfaces, then this is the last thing it wips through... Aug 22 11:56:21 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client '/usr/libexec/UserEventAgent' [10] for authorization created by '/usr/libexec/UserEventAgent' [10] (100012,0) Aug 22 11:56:22 Crockpot fseventsd[37]: event logs in /.fseventsd out of sync with volume. destroying old logs. (1 174 330) Aug 22 11:56:22 Crockpot fseventsd[37]: log dir: /.fseventsd getting new uuid: 5C379650-26FA-428F-B81F-4FE4349D50B3 Aug 22 11:56:23 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12 Aug 22 11:56:23 Crockpot systemkeychain[35]: done file: /var/run/systemkeychaincheck.done Aug 22 11:56:23 Crockpot configd[17]: network changed: DNS* Aug 22 11:56:24 --- last message repeated 1 time --- Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2D_IPC: Loaded Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2DInitialize succeeded Aug 22 11:56:24 Crockpot mDNSResponder[39]: Adding registration domain 273025955.members.btmm.icloud.com. Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe MAC AUTH succeeded Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe Unsolicited Auth Aug 22 11:56:24 Crockpot kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0 Aug 22 11:56:24 Crockpot kernel[0]: AirPort: Link Up on en1 Aug 22 11:56:24 Crockpot kernel[0]: en1: BSSID changed to 00:23:69:35:dc:fe Aug 22 11:56:24 Crockpot kernel[0]: en1::IO80211Interface::postMessage bssid changed Aug 22 11:56:24 Crockpot kernel[0]: AirPort: RSN handshake complete on en1 Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences failed to read preferences data. Errno was 21 Aug 22 11:56:25 --- last message repeated 1 time --- Aug 22 11:56:25 Crockpot airportd[30]: _doAutoJoin: Already associated to “burnum”. Bailing on auto-join. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel. Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences: error renaming file blued.plist.HXuEmQn to blued.plist. Aug 22 11:56:27 Crockpot awacsd[52]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49) Aug 22 11:56:27 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'system.services.systemconfiguration.network' by client '/System/Library/Frameworks/SystemConfiguration.framework/Versions/A/Resources/SCHelper' [54] for authorization created by '/usr/sbin/awacsd' [52] (100003,0) Aug 22 11:56:27 --- last message repeated 1 time --- Aug 22 11:56:27 Crockpot awacsd[52]: Configuring lazy AWACS client: 273025955.p04.members.btmm.icloud.com. Aug 22 11:56:28 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:32 --- last message repeated 1 time --- Aug 22 11:56:32 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:38 --- last message repeated 1 time --- Aug 22 11:56:38 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:47 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:49 Crockpot configd[17]: subnet_route: write routing socket failed, Network is unreachable Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1+:169.254.80.161) DNS* Proxy+ SMB Aug 22 11:56:51 Crockpot UserEventAgent[10]: Captive: en1: Not probing 'burnum' (protected network) Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1:169.254.80.161) DNS Proxy SMB Aug 22 11:57:07 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:57:23 Crockpot fseventsd[37]: Logging disabled completely for device:1: /Volumes/Recovery HD Aug 22 11:57:25 Crockpot kernel[0]: Kext loading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kext unloading now disabled. Aug 22 11:57:25 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) stopping Aug 22 11:57:25 Crockpot com.apple.SecurityServer[15]: Killing auth hosts Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot configd[17]: dnssd_clientstub read_all(26) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: [0x7fb025119ff0] SCNetworkReachability _llq_callback w/error=-65563 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2D_IPC: Terminated Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2DTerminate succeeded Aug 22 11:57:25 Crockpot awacsd[52]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 2 times --- Aug 22 11:57:25 Crockpot apsd[55]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: SCNC: stop, triggered by configd, type PPPSerial, reason Terminated All Aug 22 11:57:25 Crockpot configd[17]: _d2dCallback: D2D connection to mDNSResponder lost Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 4 times --- Aug 22 11:57:25 Crockpot kernel[0]: Kext autounloading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kernel requests now disabled. ... before rebooting in the middle of the safe mode startup sequence. Aug 22 12:01:10 localhost bootlog[0]: BOOT_TIME 1345662070 0 Aug 22 12:01:32 localhost kernel[0]: PMAP: PCID enabled Aug 22 12:01:32 localhost kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 Any ideas what's causing the safe mode boot to fail? System Info MacBook Pro 8,2 2.2 Ghz Core i7 4 GM Ram Mountain Lion 10.8 500GB TOSHIBA MK5065GSXF Serial-ATA rotational disk

    Read the article

  • Recover files after unsuccesfull partitioning

    - by arsan
    I wanted to install another Linux on my comp, so i tried to resize one of my NTFS partitions with Norton Partition Magic, but it didn't complete successfully and it showed some errors and said that the partition is not resized and that it's the same size like before, but when i rebooted my comp i couldn't open that partition anymore and also i am not able to mount it from my linux. So this is my question: I had very important data on that partition - can i recover it back ? I guess nothing's deleted it's just something messed up so it's not usable, but can i get it back ? Please if there's any possible way of doing it, reply to me, thank you.

    Read the article

  • Accidentally dd'ed an image to wrong drive / overwrote partition table + NTFS partition start

    - by Kento Locatelli
    I screwed up and set the wrong output for dd when trying to copy a freenas iso, overwriting the wrong external hard drive. Ironically, I was trying to setup a freenas server for data backup... External drive is only used for data storage, system is entirely intact Drive had a single NTFS partition filing the entire device (2TB WD elements) Drive originally had an MBR partition table. Drive now shows as having a GPT, presumably from the freenas image. Drive was mounted at the time, with maybe a couple kB of data written/read after running dd Drive is just a few months old and healthy (regular SMART / fs checks) I have not reboot the OS (crunchbang) /proc/partition still holds the correct information (and has been stored) Have dd's output (records in / out / bytes) testdrive did not find any partitions on quick or deep search running photorec to recover the more important data (a couple recent plaintext files that hadn't been backed up yet). Vast majority of disk content ( 80%) is unnecessary media files. My current plan is to let photorec do it's thing, then recreate the mbr with gparted and use cfdisk to create another NTFS partition using the sector information from /sys/block/.../. Is that a good course of action (that is, a chance of success)? Or anything else I should try first? Possibly relevant information: dd if=FreeNAS-8.0.4-RELEASE-p3-x86.iso of=/dev/sdc: 194568+0 records in 194568+0 records out 99618816 bytes (100 MB) copied grep . /sys/block/sdc/sdc*/{start,size}: /sys/block/sdc/sdc1/start:2048 /sys/block/sdc/sdc1/size:3907022848 cat /proc/partitions: major minor #blocks name ** Snipped ** 8 32 1953512448 sdc 8 33 1953511424 sdc1 current fdisk -l output: WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 2000.4 GB, 2000396746752 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table

    Read the article

  • How to recover my invisible HD again?

    - by pattulus
    I made this several times now, but this time something bad happened. What I did: I installed Windows 7 at a 32GB partition on my slot 2 HD in my MacPro. Windows 7 made a 105MB partition… I knew this before, but what I didn’t know was that this partition is now on my slot 4 HD. My home folder, my private videos and some other stuff are on this 1TB drive. What I found out so far: I’m currently logged in as another admin since my OS partition as well as the two other HD's aren't harmed. Disk Utility: … only shows the 105MB NTSF partition on this 1TB volume. It isn’t showing my old 1TB partition/ex-HD named "storehouse". Only the partition tab is telling me that there now is a 1TB empty free unpartitioned space. Data Rescue II: … is showing the Volume as it used to be with it's old Name "storehouse". A quick scan and a thorough scan both were done in 1 second which leds me to the conclusion that there's isn’t something deleted at all (» hope!). Data Rescue doesn’t even mention the damn "system reserved" partition. Drive Genius: … also shows the old partition and doesn’t mention the new one. But looking at the info it tells me under "content": FDisk_partition_scheme (instead of Apple_partition_scheme). Well D'oh…. Tech Tools: … doesn’t show the volume, otherwise I'd might have been tempted to press rebuild/repair. What to do next?? I think the best approach is to buy another 1TB HD and let Disk Warrior Clone my old one to it… just to be on the safe side. But what is the best thing to do after this… ???

    Read the article

  • Foremost custom file type not accepted by -t argument

    - by Channel72
    I'm trying to recover a deleted file on an ext3 file system using the foremost utility. The file I want to recover is a hpp C++ source code file. However, foremost does not automatically support the hpp file extension, so I have to add it to the config file. So, following the instructions on the man page, I add the following line to the config file: hpp n 50000 include include ASCII Then I run foremost as follows: $foremost -v -T -t hpp -i /dev/md0 -o /home/recover/ Instead of doing anything, it just displays the help message. If I change the hpp to htm or jpg, it works. So apparently foremost isn't accepting the custom file type I added into the config file. But I've looked over this dozens of times now, and I can't see what I'm doing wrong. I'm following the instructions exactly. Why doesn't foremost recognize the new file type I added to the config file?

    Read the article

  • Win7 XP mode install fails with cryptic error

    - by MAW74656
    Trying to install XPmode on Win7 Professional 64-bit SP1, but getting an error. I downloaded XPMode, Virtual PC and the update as specified here: http://www.microsoft.com/windows/virtual-pc/download.aspx. When I open XP mode for the first time it goes into the setup ("Setting up Windows XP Mode for first use..."; pick your VM password, etc.), then it runs through the progress bar until almost the end (99%?). At that point I get the error: Could not complete Setup. Please try again. Whats going on here? I've uninstalled Virtual PC and xpmode, and reinstalled in several different orders, no luck. Is there some log file that will tell me whats happening? Theres nothing showing up in the Event log that I can find. How can I fix this?

    Read the article

  • Recover not properly burned DVD from camcoder

    - by tomo
    Can anybody suggest me any good and preferably free software - working on Vista / 7 - for recovering content from DVD disks? A few DVD-R VOB files cannot be read from disk by Windows. Probably the camera failed to burn it correctly. What I want to achieve is to skip a few invalid frames in VOB files and recreate proper MPEG stream - without re-encoding whole stream and loosing the quality.

    Read the article

  • Correcting tree from messed up file tree in NTFS partition

    - by Fullmooninu
    It's a real messed situation, but I'm quite at the end of my options. It's my personal hardrive, so it's very important for me, and yes, I have no backup =( The short story: 1) I have two discs. One with Windows, and another where I had a bit of empty space at the front of the disk, so i could install Linux. The rest was occupied by a 1.8TB NTFS partition filled with data. 2) I installed Linux, and after a while realized there was not enough space for everything, so I tried using Gparted, and told it to re-size the NTFS partition, to a lesser size. 3) The system jammed. I had to reboot and broke the Resizing operation. Here's what I did to fix it: a) Rebooted into Linux Live, and used Testdisk,to deep analyze the disk, and recover the possible partitions. It found several versions of the NTFS partitions, probably made during the resizing. I told Testdisk to open every one of them, and only one could list its files. When trying to open the other options on Testdisk, it showed an error message. I assumed the one without errors, to be the correct one, and I told Testdisk to recover the partition, and write a new MBR. b) The partition had errors, and Linux has a NTFS fixing tool, used it, but the system still had errors. c) So I booted into windows and use chkdsk to correct all errors in the partition. d) Everything seems fine, but now, back in Windows, when I open one file, it opens another file, or part of another file. As in, some files took up the position of other files. What I think happened is that I recovered an old tree, and not the most current one. And that one just happened to be intact, while the most recent one was damaged. As such, the files that were moved during the failed resizing, were now, during the automatic correction, assumed wrongly to be in their correct places. So when I open a file, it tries to open another one. Radiohead - Creep.mp3 will open and it will actually be a bit from another song, or even code from a jpg. Some files seem to be all right, but others have seemed to have had their position taken by others. Anyone knows of something really powerful that can help me solve this?

    Read the article

  • What are these completely random images that pop up when using Recuva?

    - by Qubert
    I just used Recuva to get back some photos I accidentally deleted on C:, but I also noticed there's a bunch of COMPLETELY random images in the list of recoverable files I can choose from. An example would be, There are images with names like John_Doe.jpg with a file path somewhere out of C:/Windows/Assembly/ And some of these things don't even make sense, there's one called componentsSpriteImage with the path C:/?/Images that shows a "poster" from the TV series Gold Rush. I am completely lost on this.. I know the OS is on C:, but I can't really think of a reason why Microsoft would leave a image hanging around from Gold Rush.

    Read the article

  • Recover deleted files on windows 2008 file server

    - by aniga
    We have recently been hit by a weird virus which made all files and folders a system files/folders and also it hid all files and folders par some weird ones it created including: ..exe porn.exe secret.exe password.exe etc We have managed to restore the files with attrib command to unhide and unmark them as system files however we have noticed that we are missing some 4 to 5 folders of which (based on my luck) 2 of them are the two most important client we have. I am not sure if these files were deleted by the worm/virus or by my colleagues who are not owning up to them but the files are now gone. Worst of all, we do not have any backup what so ever (Yes I know, we should not have done that but it is a lesson learned and since last night we have created two forms of backup systems one to external device and one on the cloud, but I doubt any of that will help us now) We have 1 Windows 2008 File server and 4 client computers based on Windows 2007. I would be grateful if anyone can help us on how we can recover from this disaster which could potentially put us out of business.

    Read the article

  • how to recover data from my disk - I accidentally copied with dd an iso on it

    - by sijoune
    I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

    Read the article

  • The remote server returned an error: 227 Entering Passive Mode

    - by hmloo
    Today while uploading file to FTP sever, the codes throw an error - "The remote server returned an error: 227 Entering Passive Mode", after research, I got some knowledge in FTP working principle. FTP may run in active or passive mode, which determines how the data connection is established. Active mode: command connection: client >1024  -> server 21 data connection:    client >1024  <-  server 20 passive mode: command connection: client > 1024 -> server 21 data connection:    client > 1024 <- server > 1024 In active mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the client will use PORT command to tell the server:"hi, I opened port XXXX, please connect to me." and then server will use port 20 to initiate the data connection to that client port number. In passive mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the sever will tell the client:"hi, I opened port XXXX , please connect to me." and then client will initiate the data connection to that sever port number. In a nutshell, active mode is used to have the server connect to the client, and passive mode is used to have the client connect to the server. So if your FTP server is configured to work in active mode only or the firewalls between your client and the server are blocking the data port range, then you will get error message, to fix this issue, just set System.Net.FtpWebRequest property UsePassive = false. Hope this helps! Thanks for reading!

    Read the article

  • Read-only filesystem Recovery Mode not working

    - by purbleguy
    I have seen other posts of this before, but they didn't help. In short, today I was trying to play Colobot on my Ubuntu Trusty computer, when I tried to access the directory the game was in by terminal, bash warned me that the disk was in a read-only state. I'm like, ok... So I reboot and go into recovery mode, there I do fsck, it finds errors, but apparently fails to fix them. At that point I was getting annoyed and searched the internet, once I found an answer I ran the grub and dpkg options in recovery mode, recovery mode said it was read/write, but when I boot in, I get the same thing, read-only. So I reboot into recovery mode, and tada! It's read-only again. I can't think of anything else to do, as the other people who had the same problems had them fixed by the steps I did. I got all my important files backed up to both a seperate partition and a seperate computer, so no worries there. I just need help getting this to work, as my computer might as well be a brick if I cant do f/a on it

    Read the article

  • Windows 7 XP Mode disable time sync

    - by Oskar Duveborn
    So I've tried the trick from Virtual PC 2007, adding the following section to the vmc configuration file: <components> <host_time_sync> <enabled type="boolean">false</enabled> </host_time_sync> </components> Later someone suggested VPC doesn't want the components level so added this instead: <host_time_sync> <enabled type="boolean">false</enabled> <frequency type="integer">15</frequency> <threshold type="integer">10</threshold> </host_time_sync> When I start up XP Mode (Microsoft Virtual PC) it completely ignores any of these two configuration changes and if I change the clock it's instantly reset to the host time again. I've also obviously disabled the Windows Time service but as it's not joined to a domain or set up with a source it shouldn't be involved anyway. I need to test an application over a few midnight passes and thought the XP Mode machine would be perfect, so I didn't have to mess with my workstation clock... is there any way to get the VPC guest to not sync time with the host? This is easy in Hyper-V ;p

    Read the article

  • Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

    - by theonlylos
    For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >