Search Results

Search found 16987 results on 680 pages for 'second'.

Page 11/680 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• No LAN and SMB access, and Explorer not responsive, when using a second connection

  - by Lorenzo

  I apologize if this is a duplicate question, I know that there are several questions about multiple connection (LAN + LAN and LAN + dialup) but I haven't been able to find one that fits my scenario. I'm still using Windows XP on my corporate laptop, and I'm connected to the corporate LAN via Ethernet. The LAN NIC has a public IP address, although not accessible externally, obtained via the corporate DNS server. This connection is firewalled and requires a proxy to access Internet. To access Internet sites blocked by the corporate firewall, I use my smartphone via USB tethering. It is seen as a new LAN interface, and I get a private IP address (class 192.168..). There are two problems: The LAN is not accessible, as the default gateway goes to the tethering NIC. I'd like to solve this, but I can live with it. My PC becomes unresponsive if I use Windows Explorer to view local files, or even when I open the start menu. I guess that this is caused by attemps to connect to a mapped network drive. But I disabled the "Client for Microsoft Networks" in the tethering NIC. Why the system still hangs? Of course if I disable the Ethernet NIC, Explorer stops hanging. If you need further details, add a comment. Thanks!

  Read the article

• emulate dual monitor using a second machine

  - by Hemal Pandya

  I have monitors of my two machines side by side and I use them both with a single keyboard/mouse using Google Synergy+ which works great. But is it possible to use the monitor of my secondary machine as the secondary monitor of my primary? I am on XP so from what I understand I cannot just rdc from secondary to this primary. In any case that would be a different session altogether and I would prefer to be able to extend my desktop over the two monitors. Any solutions or suggestions? Thanks in advance.

  Read the article

• emulate dual monitor using a second machine

  - by Hemal Pandya

  I have monitors of my two machines side by side and I use them both with a single keyboard/mouse using Synergy+ (now hosted at Google Code) which works great. But is it possible to use the monitor of my secondary machine as the secondary monitor of my primary? I am on XP so from what I understand I cannot just rdc from secondary to this primary. In any case that would be a different session altogether and I would prefer to be able to extend my desktop over the two monitors. Any solutions or suggestions? Thanks in advance.

  Read the article

• Notepad++ shortcuts not getting copied to the second computer where I want to replicate my settings

  - by Dragos Toader

  In Notepad++, there's a way to assign your custom shortcuts by going to Run - Modify Shortcut/Delete Command... This brings up the Shortcut Mapper I set up my custom shortcuts on Computer 1 I then installed Notepad++ with the same install settings and plugins on Computer 2 I then created a zip archive of my Notepad++ folder in Program Files on Computer 1 I overwrote the Notepad++ folder in Program Files on Computer 2 with this archive My custom shortcuts did not come across. I thought that the shortcuts were saved in C:\Program Files\Notepad++\shortcuts.xml I compared C:\Program Files\Notepad++\shortcuts.xml from Computer 1 with the same file on Computer 2 and the two files are identical. Why then are the shortcuts not coming across to Computer 2? Computer 1 is Windows XP Computer 2 is Windows Server 2008 R2

  Read the article

• ATI firepro will not detect a second DVI-D monitor

  - by John

  OK so weird issue here. I have previously been running 6 screens off of 3 of the older ATI firepro graphics cards but they had a problem with the heat sink getting too hot and warping the PCB resulting in total failure of the card, to replace my three dead cards I purchased a new-type ATI firepro with the newer heat sink design. I'm only using one at the moment to make sure they've fixed the problem before I waste more money on 2 more cards but this is where things start to get weird. The Firepro's only have one port on them, they connect to two monitors via a splitter cable going from the one port to two DVI connectors for the screens. When I plug two identical monitors in via their DVI inputs not matter what I do windows and Catalyst will only detect one screen. However if I use the VGA input on one of the screens with a VGA - DVI adaptor to plug it in to the card it works fine. This confuses me greatly. I'm currently using the ATI Firepro 2270 Graphics card with identical DELL U2311H screens. I can post the rest of the system spec as well if needed but I wouldn't have thought it would make much difference as it had no problem handling 6 screens before the graphics cards failed. Naturally both catalyst and ATI drivers are the most current version. ATI tech support has been absolutely zero help, they seemed to get stumped as soon as I verified that both screens were plugged in and connected properly. Anyone have any ideas?

  Read the article

• Tomcat 5.5 - second application returs 404

  - by Tomas Tintera

  There are two versions of web application. Want to have both on one machine so I can test upgrade. If there is one of them copied to Tomcat's webapplications directory and then Tomcat is started, it works fine. So if there is only have only ...webapplicatios\ROOT\... ...webapplicatios\myApp25\... it works fine. Or when there is only ...\webapps\ROOT\... ...\webapps\myApp26\... it works fine too. If I upload both ...\webapps\ROOT and ...\webapps\myApp25 ...\webapps\myApp26 only one of the apps will work. The other one returns 404, page not found. It's running on Windows7 and I use Tomcat 5.5. Tomcat is just default installation. Any idea what to check? How to make both running both apps? Thank you in advance for any help. I'm beginner regarding TC.

  Read the article

• Second network card configuration not working.

  - by Sebas

  I have 4 servers running Centos 5. All of them have two ethernet network cards. I have configured 192.168.1.x IP addresses on their eth0 card. They are all connected to the same switch using their eth0 card and they are all working. I have configured 10.72.11.x IP addresses on their eth1 card.They are all connected to the same switch - a different one from the switch used with eth0 card - using their eth1 card and they are NOT all working. Their configuration files is like: DEVICE=eth1 BOOTPROTO=static IPADDR=10.72.11.236 BROADCAST=10.72.11.191 NETMASK=255.255.255.192 NETWORK=10.72.11.128 HWADDR=84:2B:2B:55:4B:98 IPV6INIT=yes IPV6_AUTOCONF=yes ONBOOT=yes The interfase is starting and configured as I need. [root@sql1 network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:97 inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::862b:2bff:fe55:4b97/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2981 errors:0 dropped:0 overruns:0 frame:0 TX packets:319 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:386809 (377.7 KiB) TX bytes:66134 (64.5 KiB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:98 inet addr:10.72.11.236 Bcast:10.72.11.191 Mask:255.255.255.192 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:48 Memory:dc000000-dc012800 I also added a route-eth1 file that looks like: 10.0.0.0/8 via 10.72.11.254 Routing looks fine to me: [root@sql1 network-scripts]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.72.11.192 0.0.0.0 255.255.255.192 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.72.11.254 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 But I cannot ping one server from the other. [root@sql1 network-scripts]# ping 10.72.11.235 PING 10.72.11.235 (10.72.11.235) 56(84) bytes of data. From 10.72.11.236 icmp_seq=1 Destination Host Unreachable From 10.72.11.236 icmp_seq=2 Destination Host Unreachable From 10.72.11.236 icmp_seq=3 Destination Host Unreachable From 10.72.11.236 icmp_seq=4 Destination Host Unreachable From 10.72.11.236 icmp_seq=5 Destination Host Unreachable From 10.72.11.236 icmp_seq=6 Destination Host Unreachable ^C --- 10.72.11.235 ping statistics --- 7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6033ms , pipe 3 What am I doing wrong?

  Read the article

• Using a second wifi router as a wireless bridge

  - by Greg-J

  I purchased a D-Link DGL-4500 to replace my aging WRT54G around a year ago, only to find it nowhere near as reliable. It's been collecting dust since. I'm wondering if there is a way to use it as a wireless bridge so I can connect it to my home network and then use it's ethernet ports to provide network access to several devices. Is this something that can be done? If not, are there devices meant for this? Any help would be appreciated.

  Read the article

• how to change the default open-with program to a program on the second disk

  - by Scott????

  I have a 250GB HDD for my system and a 60GB SSD using a SATA port. I installed most of my applications on the SSD. There's a strange thing though. I can not change the default open-with program to a program which is on the SSD. I think it may be caused by permission so I gave my user a 'full control' permission on the security tab in disk properties. But changing permissions is not work. After I choose an application (I've tried Notepad++, Sublime, 7Zip, etc.), nothing is added in the below window: Also, if I install 7Zip on my machine, the right click menu items can not be added.

  Read the article

• setting up a second monitor in centos

  - by Rob

  I have CentOS installed on my laptop. I hooked up my TV via VGA and it works, just not as I'd like it to. The left side (on the tv) is cut off, like the image is justified too far left. I want it to be centered, but I also want to use a different resolution. You see, I use a netbook, and thus my laptop screen is tiny, meaning some things cant fit in the same window without scrolling. I want my TV to fix that for me.

  Read the article

• How do I add a second disk to my zfs root pool

  - by ankimal

  I am trying to add a new disk to my zfs root pool. Here is my current config: zpool status pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c0d0s0 ONLINE 0 0 0 errors: No known data errors bash-3.00# df -h Filesystem Size Used Avail Use% Mounted on rpool/ROOT/s10x_u7wos_08 311G 18G 293G 6% / swap 14G 384K 14G 1% /etc/svc/volatile /usr/lib/libc/libc_hwcap1.so.1 311G 18G 293G 6% /lib/libc.so.1 swap 14G 52K 14G 1% /tmp swap 14G 40K 14G 1% /var/run rpool/export 293G 19K 293G 1% /export rpool/export/home 430G 138G 293G 32% /export/home rpool 293G 36K 293G 1% /rpool # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 63> /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 1. c2d0 <Hitachi- JK1181YAHL0YK-0001-16777216.> /pci@0,0/pci-ide@1f,5/ide@1/cmdk@0,0 Disk 1 above is the new disk I need to attach to expand my root pool (give /export/home some extra space). If I try to attach my new disk to the pool # zpool attach -f rpool c0d0s0 c2d0s0 cannot attach c2d0s0 to c0d0s0: new device must be a single disk # uname -a SunOS dsol1 5.10 Generic_139556-08 i86pc i386 i86pc Solaris Any ideas?

  Read the article

• Add second ip address to an existing SQl 2008 failover clustering

  - by Cédric Boivin

  Hello, I got actually a failover cluster on Windows Server 2008, with sql server 2008. On each server i got two network card, with two different network one are on 10.10.10.x and other are on 192.168.99.x I want my sqlserver cluster listen on the two network. Is it possible and how i add new ip address. When i add a new ip address directly in the cluster, and i do a telnet on the 1433 port with the new cluster ip address it's not working. Thanks

  Read the article

• TCP 30 small packets per second flood connection with server

  - by Denis Ermolin

  I'm testing connection with flash client and cloud server(boost::asio for software) over TCP connection. My connection with server already is really poor - 120 ms ping in average. I found when i start to send packets with 2 bytes size (without tcp header) with speed 30 packets/s - ping grow to 170-200 average. I think that it's really bad and my bad connection and bad cloud provider is reason for this high ping without any load. What do you think? (I tested my software - it can compute about 50k small packets/s so software is not a problem). I measure my ping through flash client - send packet with timestamp and immediatly send from server to client.

  Read the article

• Both screens always stay on after adding second monitor

  - by J.Merrill

  I had a single 1920x1080 monitor on a Windows 7 desktop PC and, per "power management" (not screen saver), the screen would go blank after 10 minutes. I added another monitor (2560x1600 if that matters) and since then, neither screen has ever blanked. I've tried turning on the "blank" screen saver, but that didn't help either -- I can go away for hours and when I come back, both screens are on. I've seen others with similar issues apparently caused by e.g. wireless mice that seem to move infinitesimally, but I've got the same wired mouse I had before. I can't understand why neither the screen saver nor power management is doing what it should to blank the screens, when "power management" used to do it when there was only one monitor. Maybe it doesn't matter so much with current LCD display technology (no "burn in") but doesn't a monitor use more power when "power management" hasn't turned off the display? Thanks for any suggestions.

  Read the article

• Getting IIS redirects proper for second HTTP site

  - by Gotenks

  2x IIS sites on one host. I have mainsite.domain.com and secondsite.seconddomain.com. Both sites point to the same IP in public DNS. Nothing wrong with mainsite.domain.com, it redirects and goes to its own HTTPS site without issue. Going to secondsite.seconddomain.com without HTTPS, it re-directs me to the HTTPS mainsite.domain.com when I want it to go to its own secured site. It's odd that HTTPS secondsite.seconddomain.com still works as expected. Is there anyway to make HTTP of secondsite.seconddomain.com redirect to its own HTTPS entry?

  Read the article

• Hit one key to hold a second key down, until third is pressed

  - by Core Xii

  I'm trying to get the following behavior with AutoHotKey: When the A key is pressed, AHK holds down the S key until the D key is pressed. The following script isn't working as expected: a:: Send {s Down} return d:: if (GetKeyState("s", "P")) { Send {s Up} } return Neither is the following: a:: release_s = 0 Loop { SendInput, s if release_s break } return d:: release_s = 1 return

  Read the article

• Restrict second screen to certain window/application

  - by Daniel Hepper

  I have a system with two screens. On the primary screen, I want to use Windows in a normal way. On the secondary screen, I want to display a window of a certain application and nothing else. In no case should anything else than this specific window show up on the secondary screen: no other applications, no dialog boxes. If possible, I want to restrict the mouse pointer to the primary screen as well. I tried UltraMon, but I think my requirements go beyond its features. Any ideas?

  Read the article

• Second portable monitor for a laptop

  - by user2630

  I'm away from my home office fairly regularly but I find it difficult to really settle to productive coding without my custom 4-screen custom built PC. My laptop (a slightly ageing HP Pavilion with a 1440 x 900 display) would really benefit from a portable monitor to plug into the vga port. Is there any suitable products out there which offer an easily luggable lightweight monitor which would fit in my laptop, offer reasonable resolution and response, and significantly enhance my screen real-estate?

  Read the article

• Second account for ESXi for NFS access only

  - by JohnGZA

  Hi is it possible to create a seperate user, and force ESXi to use that account for NFS access to NFS shares?

  Read the article

• ForEach loop: Output something different on every second result

  - by Wade D Ouellet

  I have two for each loops and I am trying to output something different for each second result: foreach ($wppost as $wp) { $wp_title = $wp->post_title; $wp_date = strtotime($wp->post_date); $wp_slug = $wp->post_name; $wp_id = $wp->ID; // Start Permalink Template $wp_showurl = $wp_url; $wp_showurl = str_replace("%year%", date('Y', $wp_date), $wp_showurl); $wp_showurl = str_replace("%monthnum%", date('m', $wp_date), $wp_showurl); $wp_showurl = str_replace("%day%", date('d', $wp_date), $wp_showurl); $wp_showurl = str_replace("%hour%", date('H', $wp_date), $wp_showurl); $wp_showurl = str_replace("%minute%", date('i', $wp_date), $wp_showurl); $wp_showurl = str_replace("%second%", date('s', $wp_date), $wp_showurl); $wp_showurl = str_replace("%postname%", $wp_slug, $wp_showurl); $wp_showurl = str_replace("%post_id%", $wp_id, $wp_showurl); // Stop Permalink Template $wp_posturl = $blog_address . $wp_showurl; echo '<li><a href="'.$wp_posturl.'" title="'.$wp_title.'">'.$wp_title.'</a></li>'; } For this one I want it to echo li class="even" instead of just li for each second result. I think this will have to be changed to a for loop to accomplished this but I am not sure how that is done without breaking it. Exact same for this one: if(is_array($commenters)) { foreach ($commenters as $k) { ?><li><?php if($ns_options["make_links"] == 1) { $url = ns_get_user_url($k->poster_id); if(trim($url) != '') { echo "<a href='" . $url . "'>"; } } if($ns_options["make_links"] == 2) { $url = ns_get_user_profile($k->poster_id); echo "<a href='" . $url . "'>"; } $name = $bbdb->get_var(" SELECT user_login FROM $bbdb->users WHERE ID = $k->poster_id"); echo ns_substr_ellipse($name, $ns_options["name_limit"]); if(trim($url) != '' && $ns_options["make_links"] == 1) { echo "</a>"; } if($ns_options["make_links"] == 2) { echo "</a>"; } if ($ns_options["show_posts"] == 1) { echo " (" . $k->num_posts . ")\n"; } echo $ns_options["end_html"] . "\n"; unset($url); } } else { ?></li><?php } Thanks, Wade

  Read the article

• touchesBegan / Ended incorrectly identifying second, third, etc. touch

  - by Rob

  I have an issue where touchesBegan and touchesEnded are incorrectly identifying my second, third, etc touch if I continue to hold down my first touch. If I lift my finger up off the first touch, then it will recognize the next touch just fine. It's only when I hold my first touch down continuously and then try and touch a different area with a different finger at the same time. It will then incorrectly register that second touch as being from the first touch again. Any insights into how I can fix this? - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { UITouch* touch = [touches anyObject]; NSString* filename = [listOfStuff objectAtIndex:[touch view].tag]; // do something with the filename now } - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { ITouch* touch = [touches anyObject]; NSString* buttonPressed = [listOfStuff objectAtIndex:[touch view].tag]; // do something with this info now }

  Read the article

• pow doesn't accept the second parameter to be a variable on gcc

  - by Daziplqa

  pow doesn't accept the second parameter to be a variable on gcc The following code works fine on VC++10 // file test.cc #include "stdafx.h" #include <stdio.h> #include <math.h> int main(void) { double x = 10; int y = 20; printf("%f\n", pow(x, y)); return 0; } But the following code doesn't not work on gcc: // test.c #include <stdio.h> #include <math.h> int main(void) { double x = 10; int y = 20; printf("%f\n", pow(x, y)); // error here, says no such function, however when pass the second argument in `pow` for the code runs by gcc, It works fine! return 0; }

  Read the article

• Change NSButton Background Image more than once per second

  - by beta

  I am currently working with the iPhone SDK. I have a NSTimer that changes the background image of a NSButton. Once this is complete, it will trigger the same action again (reset the NSTimer) for a predetermined number of times. My problem is that if my NSTimer is set to execute more than once per second. (0.75, say) The background image wont change. I am using NSLog to check that the event fires. But the button image will just remain in its original state. Is there any way to change the background image more often than once per second? Thanks.

  Read the article

• triying to do a combo select with this.val() but it doesnt show the second select

  - by irenkai

  Im triying to do a combo where the when the user selects Chile out of the select box, a second select shows up showing the cities. The jQuery code Im using is this. $(document).ready(function(){var ciudad = $("#ciudad"); ciudad.css("display","none"); $("select#selectionpais").change(function(){ var hearValue = $("select#selectionpais").val(); if( hearValue == "chile"){ ciudad.css("display","block"); ; }else{ ciudad.css("display","none") } }); }); and the Html is this (abreviated for the sake of understanding) <select name="pais" id="selectionpais"> .... Chile Afganistán and the second select (the one that should be shown is this) <select id="ciudad" name="ciudad" class="ciudad"> Santiago Anyone has a clue why it isnt working?

  Read the article

• Adobe Reader process fails when starting second instance

  - by Reddog

  In our C# WinForms application, we generate PDF files and launch Adobe Reader (or whatever the default system .pdf handler is) via the Process class. Since our PDF files can be large (approx 200K), we handle the Exited event to then clean up the temp file afterwards. The system works as required when a file is opened and then closed again. However, when a second file is opened (before closing Adobe Reader) the second process immediately exits (since Reader is now using it's MDI powers) and in our Exited handler our File.Delete call should fail because it's locked by the now joined Adobe process. However, in Reader we instead get: There was an error opening this document. This file cannot be found. The unusual thing is that if I put a debugger breakpoint before the file deletion and allow it to attempt (and fail) the deletion, then the system behaves as expected! I'm positive that the file exists and fairly positive that all handles/file streams to the file are closed before starting the process. We are launching with the following code: // Open the file for viewing/printing (if the default program supports it) var pdfProcess = new Process(); pdfProcess.StartInfo.FileName = tempFileName; if (pdfProcess.StartInfo.Verbs.Contains("open", StringComparer.InvariantCultureIgnoreCase)) { var verb = pdfProcess.StartInfo.Verbs.First(v => v.Equals("open", StringComparison.InvariantCultureIgnoreCase)); pdfProcess.StartInfo.Verb = verb; } pdfProcess.StartInfo.Arguments = "/N"; // Specifies a new window will be used! (But not definitely...) pdfProcess.SynchronizingObject = this; pdfProcess.EnableRaisingEvents = true; pdfProcess.Exited += new EventHandler(pdfProcess_Exited); _pdfProcessDictionary.Add(pdfProcess, tempFileName); pdfProcess.Start(); Note: We are using the _pdfProcessDictionary to store references to the Process objects so that they stay in scope so that Exited event can successfully be raised. Our cleanup/exited event is: void pdfProcess_Exited(object sender, EventArgs e) { Debug.Assert(!InvokeRequired); var p = sender as Process; try { if (_pdfProcessDictionary.ContainsKey(p)) { var tempFileName = _pdfProcessDictionary[p]; if (File.Exists(tempFileName)) // How else can I check if I can delete it!!?? { // NOTE: Will fail if the Adobe Reader application instance has been re-used! File.Delete(tempFileName); _pdfProcessDictionary.Remove(p); } CleanOtherFiles(); // This function will clean up files for any other previously exited processes in our dictionary } } catch (IOException ex) { // Just swallow it up, we will deal with trying to delete it at another point } } Possible solutions: Detect that the file is still open in another process Detect that the second process hasn't really been fully exited and that the file is opened in the first process instead

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >