Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 110/1185 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• What attracts software developers such as yourselves to choose to program for the Android mobile platform?

  - by Hasnan Karim

  Dear programmers, as part of my final year university project, I am conducting research into what makes programmers prefer to program for Android as opposed to other mobile operating systems. The description does not need to be detailed however, I am trying to find patterns between programmers to determine what properties (other than money) a software company such as Android must have in order to attract programmers and therefore grow.

  Read the article

• How does USB device recognition work?

  - by GorillaSandwich

  I'm curious how USB device recognition works in Windows. I imagine it's something like this: When you plug in a device, it tells Windows "here's my device ID to tell you what I am" Windows looks to see if any drivers have been installed that match that device ID. The driver probably tells Windows what the device should be called - like "BlackBerry Curve" or "Canon Printer" If so, it somehow associates that device with that driver Otherwise, it looks for a matching driver online (if you let it) Am I right? If so, that still leaves some questions. When you install drivers, where do they go? Are they files in a folder, or do they get added to the registry? What is Windows doing when it first recognizes the device, thinks, and finally says "your new device is installed and ready to use?" Where does Windows look for missing drivers? Is it in their own database? Do device manufacturers submit drivers to Microsoft for inclusion there? Can anybody explain how this process really works? Also, do other OSes do this differently?

  Read the article

• what should a developer know/address to build commercial Android Apps ?

  - by giulio

  Android and mobile development is an exciting area of development. As it is a new discipline, what would be expected of an android developer to build commercially robust applications in terms of skills ? The problem that I and, i think, many other "noobs" into the technology would like to know are the areas of technical skills and the progression to the required advanced topics that goes beyond the the very basics provided by Google. There is a lot of information that's quite useful but its not organised into categories of discipline nor order.

  Read the article

• Google I/O 2010 - Casting a wide net for all Android devices

  Google I/O 2010 - Casting a wide net for all Android devices Google I/O 2010 - Casting a wide net: How to target all Android devices Android 201 Justin Mattson One of Android's strengths is its flexibility to run on a wide variety of devices. In this session, we will explore the facilities the Android resource system provides to developers to make supporting many devices from one application binary easier, as well as common pitfalls. In addition to hardware heterogeneity, more than one version of Android may exist in the wild at any given time. We will go over strategies for providing cross-version compatibility. For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 4 0 ratings Time: 01:02:15 More in Science & Technology

  Read the article

• 5 Step Procedure for Android Deployment with NetBeans IDE

  - by Geertjan

  I'm finding that it's so simple to deploy apps to Android that I'm not needing to use the Android emulator at all, haven't been able to figure out how it works anyway (big blinky screen pops up that I don't know what to do with). I just simply deploy the app straight to Android, try it out there, and then uninstall it, if needed. The whole process (only step 4 and 5 below need to be done for each deployment iteration, after you've done steps 1, 2, and 3 once to set up the deployment environment), takes a few seconds. Here's what I do: On Android, go to Settings | Applications. Check "Unknown sources". In "Development", check "USB debugging". Connect Android to your computer via a USB cable. Start up NetBeans IDE, with NBAndroid installed, as described yesterday. and create your "Hello World" app. Right-click the project in the IDE and choose "Export Signed Android Package". Create a new keystore, or choose an existing one, via the wizard that appears. At the end of the wizard (would be nice if NBAndroid would let you set up a keystore once and then reuse it for all your projects, without needing to work through the whole wizard step by step each time), you'll have a new release APK file (Android deployment archive) in the project's 'bin' folder, which you can see in the Files window. Go to the command line (would be nice if NBAndroid were to support adb, would mean I wouldn't need the command line at all), browse to the location of the APK file above. Type "adb install helloworld-release.apk" or whatever the APK file is called. You should see a "Success" message in the command line. Now the application is installed. On your Android, go to "Applications", and there you'll see your brand new app. Then try it out there and delete it if you're not happy with it. After you've made a change in your app, simply repeat step 4 and 5, i.e., create a new APK and install it via adb. Step 4 and 5 take a couple of seconds. And, given that it's all so simple, I don't see the value of the Android emulator, at all.

  Read the article

• Is it a good idea to make a native Android app, or is the environment too much hassle? [closed]

  - by desbest

  I've constantly been hearing bad things about the native development environment for Android, and that it should be avoided at all costs. Also it would require that I learn java and use Eclipse IDE. My concerns are mainly about how easy (or difficult) it is to code with the APIs. Is it good to make native Android apps without cross platform tools Phonegap/Titanium/Rhodes, or is it too much trouble than it's worth?

  Read the article

• android ftp upload has stopped error

  - by Goxel Arp

  class Asenkron extends AsyncTask<String,Integer,Long> { @Override protected Long doInBackground(String... aurl) { FTPClient con=null; try ` { con = new FTPClient(); con.connect(aurl[0]); if (con.login(aurl[1], aurl[2])) { con.enterLocalPassiveMode(); // important! con.setFileType(http://FTP.BINARY_FILE_TYPE); FileInputStream in = new FileInputStream(new File(aurl[3])); boolean result = con.storeFile(aurl[3], in); in.close(); con.logout(); con.disconnect(); } } catch (Exception e) { Toast.makeText(getApplicationContext(), e.toString(), Toast.LENGTH_LONG).show(); } return null; } protected void onPostExecute(String result) {} } I AM USING THIS CLASS LIKE BELOW.THERE IS BUTTON AND WHENEVER I CLICK THE BUTTON IT SHOULD START FTP UPLOAD PROCESS IN BACKGROUND BUT I GET "PROGRAM HAS STOPPED UNFORTUNATELY" ERROR. Assume that The ftp address and username password pathfile sections are true and I get the internet and network permissions already by the way ... button1.setOnClickListener(new OnClickListener() { public void onClick(View arg0) { new Asenkron().execute("ftpaddress","username","pass","pathfileon telephone"); } }); And here is the logcat for you to analyse the potential error and help me ... 10-13 13:01:25.591: I/dalvikvm(633): threadid=3: reacting to signal 3 10-13 13:01:25.711: I/dalvikvm(633): Wrote stack traces to '/data/anr/traces.txt' 10-13 13:01:25.921: D/gralloc_goldfish(633): Emulator without GPU emulation detected. 10-13 13:01:31.441: W/dalvikvm(633): threadid=11: thread exiting with uncaught exception (group=0x409c01f8) 10-13 13:01:31.461: E/AndroidRuntime(633): FATAL EXCEPTION: AsyncTask #1 10-13 13:01:31.461: E/AndroidRuntime(633): java.lang.RuntimeException: An error occured while executing doInBackground() 10-13 13:01:31.461: E/AndroidRuntime(633): at android.os.AsyncTask$3.done(AsyncTask.java:278) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.FutureTask$Sync.innerSetException(FutureTask.java:273) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.FutureTask.setException(FutureTask.java:124) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:307) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.FutureTask.run(FutureTask.java:137) 10-13 13:01:31.461: E/AndroidRuntime(633): at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:208) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1076) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:569) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.lang.Thread.run(Thread.java:856) 10-13 13:01:31.461: E/AndroidRuntime(633): Caused by: java.lang.RuntimeException: Can't create handler inside thread that has not called Looper.prepare() 10-13 13:01:31.461: E/AndroidRuntime(633): at android.os.Handler.<init>(Handler.java:121) 10-13 13:01:31.461: E/AndroidRuntime(633): at android.widget.Toast$TN.<init>(Toast.java:317) 10-13 13:01:31.461: E/AndroidRuntime(633): at android.widget.Toast.<init>(Toast.java:91) 10-13 13:01:31.461: E/AndroidRuntime(633): at android.widget.Toast.makeText(Toast.java:233) 10-13 13:01:31.461: E/AndroidRuntime(633): at com.example.ftpodak.ODAK$Asenkron.doInBackground(ODAK.java:74) 10-13 13:01:31.461: E/AndroidRuntime(633): at com.example.ftpodak.ODAK$Asenkron.doInBackground(ODAK.java:1) 10-13 13:01:31.461: E/AndroidRuntime(633): at android.os.AsyncTask$2.call(AsyncTask.java:264) 10-13 13:01:31.461: E/AndroidRuntime(633): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305) 10-13 13:01:31.461: E/AndroidRuntime(633): ... 5 more By the way I changed the relevant code like that ; instead of catch (Exception e) { Toast.makeText(getApplicationContext(), e.toString(), Toast.LENGTH_LONG).show(); } I replaced with this code catch (Exception e) { HATA=e.toString(); } And I added the code to button textview1.setText(HATA); So I can see the error on the textview and it is writing that "Android java.net.UnknownHostException: Host is unresolved" But i know that the ftp server is correct and I check the ftp server from the AndFTP application. With the same address login and pass information ftp server is working.So the problem is in my code I think.Any help will be too much appreciated.Anyone who can help me I can give teamviewer to analyse what is the problem ...

  Read the article

• Proguard and two projects using the same android library. broadcasting. ClassNotFoundException

  - by trololo

  The problem:I have got 2 apps. The interact with each other via broadcasting. I have parcelable class in the android library (they send content of class in the library). So after using Proguard I have got ClassNotFondException. How to solve it? 07-03 02:13:51.832: E/AndroidRuntime(6801): FATAL EXCEPTION: main 07-03 02:13:51.832: E/AndroidRuntime(6801): java.lang.RuntimeException: Unable to start receiver <appname>.<name>.ar.free.BRMain: java.lang.RuntimeException: Parcelable encounteredClassNotFoundException reading a Serializable object (name = <appname>.a.a.b) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.app.ActivityThread.handleReceiver(ActivityThread.java:2277) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.app.ActivityThread.access$1500(ActivityThread.java:140) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1303) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Handler.dispatchMessage(Handler.java:99) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Looper.loop(Looper.java:137) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.app.ActivityThread.main(ActivityThread.java:4898) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.lang.reflect.Method.invokeNative(Native Method) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.lang.reflect.Method.invoke(Method.java:511) 07-03 02:13:51.832: E/AndroidRuntime(6801): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1006) 07-03 02:13:51.832: E/AndroidRuntime(6801): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:773) 07-03 02:13:51.832: E/AndroidRuntime(6801): at dalvik.system.NativeStart.main(Native Method) 07-03 02:13:51.832: E/AndroidRuntime(6801): Caused by: java.lang.RuntimeException: Parcelable encounteredClassNotFoundException reading a Serializable object (name = <appname>.a.a.b) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Parcel.readSerializable(Parcel.java:2148) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Parcel.readValue(Parcel.java:2016) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Parcel.readMapInternal(Parcel.java:2226) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Bundle.unparcel(Bundle.java:223) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Bundle.getInt(Bundle.java:922) 07-03 02:13:51.832: E/AndroidRuntime(6801): at <appname>.<name>.ar.free.BRMain.onReceive(BRMain.java:35) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.app.ActivityThread.handleReceiver(ActivityThread.java:2270) 07-03 02:13:51.832: E/AndroidRuntime(6801): ... 10 more 07-03 02:13:51.832: E/AndroidRuntime(6801): Caused by: java.lang.ClassNotFoundException: <appname>.a.a.b 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.lang.Class.classForName(Native Method) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.lang.Class.forName(Class.java:217) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.resolveClass(ObjectInputStream.java:2301) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.readNewClassDesc(ObjectInputStream.java:1660) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:683) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.readNewObject(ObjectInputStream.java:1803) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.readNonPrimitiveContent(ObjectInputStream.java:787) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.readObject(ObjectInputStream.java:2003) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.io.ObjectInputStream.readObject(ObjectInputStream.java:1960) 07-03 02:13:51.832: E/AndroidRuntime(6801): at android.os.Parcel.readSerializable(Parcel.java:2142) 07-03 02:13:51.832: E/AndroidRuntime(6801): ... 16 more 07-03 02:13:51.832: E/AndroidRuntime(6801): Caused by: java.lang.NoClassDefFoundError: <appname>/a/a/b 07-03 02:13:51.832: E/AndroidRuntime(6801): ... 26 more 07-03 02:13:51.832: E/AndroidRuntime(6801): Caused by: java.lang.ClassNotFoundException: <appname>.a.a.b 07-03 02:13:51.832: E/AndroidRuntime(6801): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:61) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.lang.ClassLoader.loadClass(ClassLoader.java:501) 07-03 02:13:51.832: E/AndroidRuntime(6801): at java.lang.ClassLoader.loadClass(ClassLoader.java:461) 07-03 02:13:51.832: E/AndroidRuntime(6801): ... 26 more

  Read the article

• Communicating between C# application and Android app via bluetooth

  - by Akki

  The android application acts as a server in this case. I have a main activity which creates a Thread to handle serverSocket and a different thread to handle the socket connection. I am using a uuid common to C# and android. I am using 32feet bluetooth library for C#. The errors i am facing are 1) My logcat shows this debug log Error while doing socket.connect()1 java.io.IOException: File descriptor in bad state Message: File descriptor in bad state Localized Message: File descriptor in bad state Received : Testing Connection Count of Thread is : 1 2) When i try to send something via C# app the second time, this exception is thrown: A first chance exception of type 'System.InvalidOperationException' occurred in System.dll System.InvalidOperationException: BeginConnect cannot be called while another asynchronous operation is in progress on the same Socket. at System.Net.Sockets.Socket.DoBeginConnect(EndPoint endPointSnapshot, SocketAddress socketAddress, LazyAsyncResult asyncResult) at System.Net.Sockets.Socket.BeginConnect(EndPoint remoteEP, AsyncCallback callback, Object state) at InTheHand.Net.Bluetooth.Msft.SocketBluetoothClient.BeginConnect(BluetoothEndPoint remoteEP, AsyncCallback requestCallback, Object state) at InTheHand.Net.Sockets.BluetoothClient.BeginConnect(BluetoothEndPoint remoteEP, AsyncCallback requestCallback, Object state) at InTheHand.Net.Sockets.BluetoothClient.BeginConnect(BluetoothAddress address, Guid service, AsyncCallback requestCallback, Object state) at BTSyncClient.Form1.connect() in c:\users\----\documents\visual studio 2010\Projects\TestClient\TestClient\Form1.cs:line 154 I only know android application programming and i designed the C# by learning bit and pieces. FYI, My android phone is galaxy s with ICS running on it.Please point out my mistakes.. Source codes : C# Code using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.Net.Sockets; using InTheHand.Net.Bluetooth; using InTheHand.Windows.Forms; using InTheHand.Net.Sockets; using InTheHand.Net; namespace BTSyncClient { public partial class Form1 : Form { BluetoothClient myself; BluetoothDeviceInfo bTServerDevice; private Guid uuid = Guid.Parse("00001101-0000-1000-8000-00805F9B34FB"); bool isConnected; public Form1() { InitializeComponent(); if (BluetoothRadio.IsSupported) { myself = new BluetoothClient(); } } private void Form1_Load(object sender, EventArgs e) { } private void button1_Click(object sender, EventArgs e) { connect(); } private void Form1_FormClosing(object sender, FormClosingEventArgs e) { try { myself.GetStream().Close(); myself.Dispose(); } catch (Exception ex) { Console.Out.WriteLine(ex); } } private void button2_Click(object sender, EventArgs e) { SelectBluetoothDeviceDialog dialog = new SelectBluetoothDeviceDialog(); DialogResult result = dialog.ShowDialog(this); if(result.Equals(DialogResult.OK)){ bTServerDevice = dialog.SelectedDevice; } } private void callback(IAsyncResult ar) { String msg = (String)ar.AsyncState; if (ar.IsCompleted) { isConnected = myself.Connected; if (myself.Connected) { UTF8Encoding encoder = new UTF8Encoding(); NetworkStream stream = myself.GetStream(); if (!stream.CanWrite) { MessageBox.Show("Stream is not Writable"); } System.IO.StreamWriter mywriter = new System.IO.StreamWriter(stream, Encoding.UTF8); mywriter.WriteLine(msg); mywriter.Flush(); } else MessageBox.Show("Damn thing isnt connected"); } } private void connect() { try { if (bTServerDevice != null) { myself.BeginConnect(bTServerDevice.DeviceAddress, uuid, new AsyncCallback(callback) , message.Text); } } catch (Exception e) { Console.Out.WriteLine(e); } } } } Server Thread import java.io.IOException; import java.util.UUID; import android.bluetooth.BluetoothAdapter; import android.bluetooth.BluetoothServerSocket; import android.bluetooth.BluetoothSocket; import android.util.Log; public class ServerSocketThread extends Thread { private static final String TAG = "TestApp"; private BluetoothAdapter btAdapter; private BluetoothServerSocket serverSocket; private boolean stopMe; private static final UUID uuid = UUID.fromString("00001101-0000-1000-8000-00805F9B34FB"); //private static final UUID uuid = UUID.fromString("6e58c9d5-b0b6-4009-ad9b-fd9481aef9b3"); private static final String SERVICE_NAME = "TestService"; public ServerSocketThread() { stopMe = false; btAdapter = BluetoothAdapter.getDefaultAdapter(); try { serverSocket = btAdapter.listenUsingRfcommWithServiceRecord(SERVICE_NAME, uuid); } catch (IOException e) { Log.d(TAG,e.toString()); } } public void signalStop(){ stopMe = true; } public void run(){ Log.d(TAG,"In ServerThread"); BluetoothSocket socket = null; while(!stopMe){ try { socket = serverSocket.accept(); } catch (IOException e) { break; } if(socket != null){ AcceptThread newClientConnection = new AcceptThread(socket); newClientConnection.start(); } } Log.d(TAG,"Server Thread now dead"); } // Will cancel the listening socket and cause the thread to finish public void cancel(){ try { serverSocket.close(); } catch (IOException e) { } } } Accept Thread import java.io.IOException; import java.io.InputStream; import java.util.Scanner; import android.bluetooth.BluetoothSocket; import android.util.Log; public class AcceptThread extends Thread { private BluetoothSocket socket; private String TAG = "TestApp"; static int count = 0; public AcceptThread(BluetoothSocket Socket) { socket = Socket; } volatile boolean isError; String output; String error; public void run() { Log.d(TAG, "AcceptThread Started"); isError = false; try { socket.connect(); } catch (IOException e) { Log.d(TAG,"Error while doing socket.connect()"+ ++count); Log.d(TAG, e.toString()); Log.d(TAG,"Message: "+e.getLocalizedMessage()); Log.d(TAG,"Localized Message: "+e.getMessage()); isError = true; } InputStream in = null; try { in = socket.getInputStream(); } catch (IOException e) { Log.d(TAG,"Error while doing socket.getInputStream()"); Log.d(TAG, e.toString()); Log.d(TAG,"Message: "+e.getLocalizedMessage()); Log.d(TAG,"Localized Message: "+e.getMessage()); isError = true; } Scanner istream = new Scanner(in); if (istream.hasNextLine()) { Log.d(TAG, "Received : "+istream.nextLine()); Log.d(TAG,"Count of Thread is : " + count); } istream.close(); try { in.close(); } catch (IOException e) { Log.d(TAG,"Error while doing in.close()"); Log.d(TAG, e.toString()); Log.d(TAG,"Message: "+e.getLocalizedMessage()); Log.d(TAG,"Localized Message: "+e.getMessage()); isError = true; } try { socket.close(); } catch (IOException e) { Log.d(TAG,"Error while doing socket.close()"); Log.d(TAG, e.toString()); Log.d(TAG,"Message: "+e.getLocalizedMessage()); Log.d(TAG,"Localized Message: "+e.getMessage()); isError = true; } } }

  Read the article

• Android: restful API service

  - by Martyn

  Hey, I'm looking to make a service which I can use to make calls to a web based rest api. I've spent a couple of days looking through stackoverflow.com, reading books and looking at articles whilst playing about with some code and I can't get anything which I'm happy with. Basically I want to start a service on app init then I want to be able to ask that service to request a url and return the results. In the meantime I want to be able to display a progress window or something similar. I've created a service currently which uses IDL, I've read somewhere that you only really need this for cross app communication, so think these needs stripping out but unsure how to do callbacks without it. Also when I hit the post(Config.getURL("login"), values) the app seems to pause for a while (seems weird - thought the idea behind a service was that it runs on a different thread!) Currently I have a service with post and get http methods inside, a couple of AIDL files (for two way communication), a ServiceManager which deals with starting, stopping, binding etc to the service and I'm dynamically creating a Handler with specific code for the callbacks as needed. I don't want anyone to give me a complete code base to work on, but some pointers would be greatly appreciated; even if it's to say I'm doing it completely wrong. I'm pretty new to Android and Java dev so if there are any blindingly obvious mistakes here - please don't think I'm a rubbish developer, I'm just wet behind the ears and would appreciate being told exactly where I'm going wrong. Anyway, code in (mostly) full (really didn't want to put this much code here, but I don't know where I'm going wrong - apologies in advance): public class RestfulAPIService extends Service { final RemoteCallbackList<IRemoteServiceCallback> mCallbacks = new RemoteCallbackList<IRemoteServiceCallback>(); public void onStart(Intent intent, int startId) { super.onStart(intent, startId); } public IBinder onBind(Intent intent) { return binder; } public void onCreate() { super.onCreate(); } public void onDestroy() { super.onDestroy(); mCallbacks.kill(); } private final IRestfulService.Stub binder = new IRestfulService.Stub() { public void doLogin(String username, String password) { Message msg = new Message(); Bundle data = new Bundle(); HashMap<String, String> values = new HashMap<String, String>(); values.put("username", username); values.put("password", password); String result = post(Config.getURL("login"), values); data.putString("response", result); msg.setData(data); msg.what = Config.ACTION_LOGIN; mHandler.sendMessage(msg); } public void registerCallback(IRemoteServiceCallback cb) { if (cb != null) mCallbacks.register(cb); } }; private final Handler mHandler = new Handler() { public void handleMessage(Message msg) { // Broadcast to all clients the new value. final int N = mCallbacks.beginBroadcast(); for (int i = 0; i < N; i++) { try { switch (msg.what) { case Config.ACTION_LOGIN: mCallbacks.getBroadcastItem(i).userLogIn( msg.getData().getString("response")); break; default: super.handleMessage(msg); return; } } catch (RemoteException e) { } } mCallbacks.finishBroadcast(); } public String post(String url, HashMap<String, String> namePairs) {...} public String get(String url) {...} }; A couple of AIDL files: package com.something.android oneway interface IRemoteServiceCallback { void userLogIn(String result); } and package com.something.android import com.something.android.IRemoteServiceCallback; interface IRestfulService { void doLogin(in String username, in String password); void registerCallback(IRemoteServiceCallback cb); } and the service manager: public class ServiceManager { final RemoteCallbackList<IRemoteServiceCallback> mCallbacks = new RemoteCallbackList<IRemoteServiceCallback>(); public IRestfulService restfulService; private RestfulServiceConnection conn; private boolean started = false; private Context context; public ServiceManager(Context context) { this.context = context; } public void startService() { if (started) { Toast.makeText(context, "Service already started", Toast.LENGTH_SHORT).show(); } else { Intent i = new Intent(); i.setClassName("com.something.android", "com.something.android.RestfulAPIService"); context.startService(i); started = true; } } public void stopService() { if (!started) { Toast.makeText(context, "Service not yet started", Toast.LENGTH_SHORT).show(); } else { Intent i = new Intent(); i.setClassName("com.something.android", "com.something.android.RestfulAPIService"); context.stopService(i); started = false; } } public void bindService() { if (conn == null) { conn = new RestfulServiceConnection(); Intent i = new Intent(); i.setClassName("com.something.android", "com.something.android.RestfulAPIService"); context.bindService(i, conn, Context.BIND_AUTO_CREATE); } else { Toast.makeText(context, "Cannot bind - service already bound", Toast.LENGTH_SHORT).show(); } } protected void destroy() { releaseService(); } private void releaseService() { if (conn != null) { context.unbindService(conn); conn = null; Log.d(LOG_TAG, "unbindService()"); } else { Toast.makeText(context, "Cannot unbind - service not bound", Toast.LENGTH_SHORT).show(); } } class RestfulServiceConnection implements ServiceConnection { public void onServiceConnected(ComponentName className, IBinder boundService) { restfulService = IRestfulService.Stub.asInterface((IBinder) boundService); try { restfulService.registerCallback(mCallback); } catch (RemoteException e) {} } public void onServiceDisconnected(ComponentName className) { restfulService = null; } }; private IRemoteServiceCallback mCallback = new IRemoteServiceCallback.Stub() { public void userLogIn(String result) throws RemoteException { mHandler.sendMessage(mHandler.obtainMessage(Config.ACTION_LOGIN, result)); } }; private Handler mHandler; public void setHandler(Handler handler) { mHandler = handler; } } Service init and bind: // this I'm calling on app onCreate servicemanager = new ServiceManager(this); servicemanager.startService(); servicemanager.bindService(); application = (ApplicationState)this.getApplication(); application.setServiceManager(servicemanager); service function call: // this lot i'm calling as required - in this example for login progressDialog = new ProgressDialog(Login.this); progressDialog.setMessage("Logging you in..."); progressDialog.show(); application = (ApplicationState) getApplication(); servicemanager = application.getServiceManager(); servicemanager.setHandler(mHandler); try { servicemanager.restfulService.doLogin(args[0], args[1]); } catch (RemoteException e) { e.printStackTrace(); } ...later in the same file... Handler mHandler = new Handler() { public void handleMessage(Message msg) { switch (msg.what) { case Config.ACTION_LOGIN: if (progressDialog.isShowing()) { progressDialog.dismiss(); } try { ...process login results... } } catch (JSONException e) { Log.e("JSON", "There was an error parsing the JSON", e); } break; default: super.handleMessage(msg); } } }; Any and all help is greatly appreciated and I'll even buy you a coffee or a beer if you fancy :D Martyn

  Read the article

• Using the Android SDK on a Mac, Eclipse is really slow. How can I speed it up?

  - by morais

  I'm using Eclipse + the Android SDK on a Mac running Snow Leopard to develop Android apps. Thing is, Eclipse is really slow - like, it "beach balls" for a few seconds when changing tabs. Is there anything I can do to improve it's performance?

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  Hi, I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• USB Device With Embedded Fileserver

  - by Richard Martinez

  I'm attempting to access logs from a proprietary hardware box with no reasonable hope of modifying the software. There is a process on the device to dump log files to a flash drive on the USB port after entering a code sequence. Currently, analysis of the logs requires the following: Physical presence at the device Manual entry of the code sequence Removal of USB device Insertion of USB device into a normal Linux box I'm hoping there is some sort of device that can act as a USB mass storage device but simultaneously make it's contents available as a network file share (wired preferred). Does such a device currently exist? A combo hardware/software solution would also work.

  Read the article

• What are USB device resets?

  - by ILIV

  I have this brand-new software RAID-1 built with two WD Elements external USB drives, and I can see that Linux repeats the following message quite a bit: ... [302148.036912] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd [302153.052029] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302186.031481] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302217.050210] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302281.043543] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302312.090158] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302351.076851] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd ... So, what does it say? Is this normal? Is this a problem that I should try to fix?

  Read the article

• solaris + match the network device name according to IP address

  - by yael

  how to find the device name as ( e1000g2 , e1000g3 , etc ) according to his IP address on Solaris machine for example ifconfig -a | grep 10.106.134.133 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255 ifconfig with grep command view only the line with the IP address , and the device name appears before the IP address so my target is to match the device name according to the IP address on Solaris machine , and then insert the device name in to parameter ( ksh ) please advice? full example: from ifconfig -a ( I get the IP and device name , what I need is to find the device name according to IP address , and insert the device name in to parameter ) e1000g2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255

  Read the article

• What options exist when the vendor does not supply an ADB driver for an Android device?

  - by STATUS_ACCESS_DENIED

  So I bought an Android phone and the vendor does not offer any drivers whatsoever. The Android SDK and the drivers that come with it don't seem to work with the device, but the device itself reports as Android 2.2.1. Other users have reported that the drivers of the Nook Color worked for them, but I cannot confirm this, after trying. What options do I have to connect to the device (and ultimately to root it)? Is it truly just the .inf file that I need to manipulate in order to make the device ID known to Windows? After all there are tools to figure out those strings while the device is connected (although "unknown") ...

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• TabHost / TabWidget - Scale Background Image ?

  - by user359519

  I need to scale my TabWidget background images so they maintain aspect ratio. I am using a TabHost with a TabWidget. I am then using setBackgroundDrawable to set the images. I found a close answer here - Background in tab widget ignore scaling. However, I'm not sure just where to add the new Drawable code. (Working with the HelloTabWidget example, none of my modules use RelativeLayout, and I don't see any layout for "tabcontent".) I also found this thread - Android: Scale a Drawable or background image?. According to it, it sounds like I would have to pre-scale my images, which defeats the whole purpose of making them scaleable. I also found another thread where someone subclassed the Drawable class so it would either not scale, or it would scale properly. I can't find it now, but that seems like a LOT to go through when you should just be able to do something simple like mTab.setScaleType(centerInside). Here's my code: main.xml: <?xml version="1.0" encoding="utf-8"?> <TabHost xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/tabhost" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="@drawable/main_background"> <LinearLayout android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <FrameLayout android:id="@android:id/tabcontent" android:layout_width="fill_parent" android:layout_height="fill_parent" android:layout_weight="1"/> <TabWidget android:id="@android:id/tabs" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_weight="0"/> </LinearLayout> </TabHost> main activity: tabHost.setOnTabChangedListener(new OnTabChangeListener() { TabHost changedTabHost = getTabHost(); TabWidget changedTabWidget = getTabWidget(); View changedView = changedTabHost.getTabWidget().getChildAt(0); public void onTabChanged(String tabId) { int selectedTab = changedTabHost.getCurrentTab(); TabWidget tw = getTabWidget(); if(selectedTab == 0) { //setTitle("Missions Timeline"); View tempView = tabHost.getTabWidget().getChildAt(0); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_timeline_on)); tempView = tabHost.getTabWidget().getChildAt(1); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_map_off)); tempView = tabHost.getTabWidget().getChildAt(2); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_search_off)); tempView = tabHost.getTabWidget().getChildAt(3); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_news_off)); tempView = tabHost.getTabWidget().getChildAt(4); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_license_off)); //ImageView iv = (ImageView)tabHost.getTabWidget().getChildAt(0).findViewById(android.R.id.icon); //iv.setImageDrawable(getResources().getDrawable(R.drawable.tab_timeline_on)); //iv = (ImageView)tabHost.getTabWidget().getChildAt(1).findViewById(android.R.id.icon); //iv.setImageDrawable(getResources().getDrawable(R.drawable.tab_map_off)); } else if (selectedTab == 1) { //setTitle("Spinoffs Around You"); View tempView = tabHost.getTabWidget().getChildAt(0); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_timeline_off)); tempView = tabHost.getTabWidget().getChildAt(1); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_map_on)); tempView = tabHost.getTabWidget().getChildAt(2); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_search_off)); tempView = tabHost.getTabWidget().getChildAt(3); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_news_off)); tempView = tabHost.getTabWidget().getChildAt(4); tempView.setBackgroundDrawable(getResources().getDrawable(R.drawable.tab_license_off)); } I also tried 9patch images, but they wind up being too small. So, what's the best way to go about this?

  Read the article

• How does object of sub-class record information about its super-class the in a Virtual Inheritance

  - by Summer_More_More_Tea

  Hi there: I encounter this problem when tackling with virtual inheritance. I remember that in a non-virtual inheritance hierarchy, object of sub-class hold an object of its direct super-class. What about virtual inheritance? In this situation, does object of sub-class hold an object of its super-class directly or just hold a pointer pointing to an object of its super-class? By the way, why the output of the following code is: sizeof(A): 8 sizeof(B): 20 sizeof(C): 32 Code: #include <iostream> using namespace std; class A{ char k[ 3 ]; public: virtual void a(){}; }; class B : public virtual A{ char j[ 3 ]; public: virtual void b(){}; }; class C : public virtual B{ char i[ 3 ]; public: virtual void c(){}; }; int main( int argc, char *argv[] ){ cout << "sizeof(A): " << sizeof( A ) << endl; cout << "sizeof(B): " << sizeof( B ) << endl; cout << "sizeof(C): " << sizeof( C ) << endl; return 0; } Thanks in advance. Kind regards.

  Read the article

• vir-install virtual machine hang on Probbing EDD

  - by user2256235

  I'm using vir-stall virtual machine, and my command is virt-install --name=gust --vcpus=4 --ram=8192 --network bridge:br0 --cdrom=/opt/rhel-server-6.2-x86_64-dvd.iso --disk path=/opt/as1/as1.img,size=50 --accelerate After running the command, it hangs on probing EDD, - Press the <ENTER> key to begin the installation process. +----------------------------------------------------------+ | Welcome to Red Hat Enterprise Linux 6.2! | |----------------------------------------------------------| | Install or upgrade an existing system | | Install system with basic video driver | | Rescue installed system | | Boot from local drive | | Memory test | | | | | | | | | | | | | | | +----------------------------------------------------------+ Press [Tab] to edit options Automatic boot in 57 seconds... Loading vmlinuz...... Loading initrd.img...............................ready. Probing EDD (edd=off to disable)... ok ÿ Previously, I wait a long time, it seems no marching. After I press ctrl + ] and stop it. I find it was running using virsh list, but I cannot console it using virsh concole gust. Any problem and how should I do. Many Thanks

  Read the article

• Access virtualhosts over LAN (Also in xpmode (Virtual PC))

  - by Pheter

  Hi, I am running Wamp on my computer (the host). I have set up several virtualhosts in apache and they are working fine when I access them from the same computer (host). I have installed Windows XPMode on my computer (which is running windows 7). XPMode (which uses Virtual PC) is set up to use a NAT network. The network in XPMode is working fine, and I can access the host PC via the IP address 192.168.1.5, just as I would if I was using any physical computer on the same network. I can view all the web pages at 192.168.1.5 and it's subdirectories. However, I cannot access any of the subdomains that are configured in the virtualhosts of the host computer. How can I access the subdomains? I don't think that the fact that I am using XPMode and am using a virtualized OS has anything to do with it, but I thought that it was worth mentioning.

  Read the article

• ASP.Net Application Trust Medium File IO Outside Virtual Directory

  - by Trey Gramann

  I am trying to determine how suicidal this is... I have a hosting environment where a custom ASP.Net CMS application needs to access the files in the root folder of a website even though it is in a virtual folder so it can be shared accross many sites. I can modify the Medium trust on the server and came up with this... <IPermission class="FileIOPermission" version="1" Read="$AppDir$;$AppDir$\.." Write="$AppDir$;$AppDir$\.." Append="$AppDir$;$AppDir$\.." PathDiscovery="$AppDir$;$AppDir$\.."/> Oddly enough, it works. Yes, I understand it is doing this for all the Apps. I am a bit at a loss as to easy ways to test what else is being exposed. Feels dangerous. Opinions?

  Read the article

• How do I get a Dane-Elec mp3/mp4 player working?

  - by user40432

  My MP3/MP4 does not plug-in and play and therefore I can not transfer any file to the MP3/MP4 dane-elec music my touch or only dane-elec with 8 gb in memory and perhapses model zt1 with radio,..and microsdhc card slot following the above link the mp3/mp4 is there and it is MP3 Player: TOUCH MY MUSIC and the complete information is on this site http://www.danedigital.com/8-Music-Media-Players/2-music-touch.html as the Technical Specifications MP3 Player: TOUCH MY MUSIC The Mp4 player has a very classy. It allows its users to play music and view photos and video. His fluent interface, its touch-pad, his radio and RDS Micro SDHC reader makes him a very complete device will become the ideal musical companion. ubuntu i am with is ubuntu 11.10 kernel 3.0.0-14-generic the latest I tried to install many applications but nothing worked. With disk utility I can see that Ubuntu can recognize something, that as a peripheral device named rockchip usbdisk user and rockchip usbdisk sd, and i can plug and play other devices, and only this mp3/mp4 do not connect to the computer with ubuntu and the device as no problem working disconnected to computer I try to see if work on Windows and it does! I can see the device and transfer files to the MP3/MP4 dane-elec folder device and use FAT32. So why can not do on Ubuntu!? What can I do and why does not work on Ubuntu? What is wrong with it? Here are the logs: Jan 4 17:27:34 a-ubuntu kernel: [ 141.948863] init: apport pre-start process (1970) terminated with status 1 Jan 4 17:27:34 a-ubuntu kernel: [ 141.963202] init: apport post-stop process (1994) terminated with status 1 Jan 4 17:30:02 a-ubuntu kernel: [ 289.564049] usb 2-4: new high speed USB device number 3 using ehci_hcd Jan 4 17:30:02 a-ubuntu kernel: [ 289.988706] usbcore: registered new interface driver uas Jan 4 17:30:02 a-ubuntu kernel: [ 289.992056] Initializing USB Mass Storage driver... Jan 4 17:30:02 a-ubuntu kernel: [ 289.992272] scsi6 : usb-storage 2-4:1.0 Jan 4 17:30:02 a-ubuntu kernel: [ 289.993082] usbcore: registered new interface driver usb-storage Jan 4 17:30:02 a-ubuntu kernel: [ 289.993088] USB Mass Storage support registered. Jan 4 17:30:03 a-ubuntu kernel: [ 290.996887] scsi 6:0:0:0: Direct-Access RockChip USBDISK User 1.00 PQ: 0 ANSI: 0 Jan 4 17:30:03 a-ubuntu kernel: [ 290.997372] scsi 6:0:0:1: Direct-Access RockChip USBDISK SD 1.00 PQ: 0 ANSI: 0 Jan 4 17:30:03 a-ubuntu kernel: [ 290.997478] scsi: killing requests for dead queue Jan 4 17:30:03 a-ubuntu kernel: [ 291.002712] scsi: killing requests for dead queue Jan 4 17:30:03 a-ubuntu kernel: [ 291.002880] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.016249] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.032252] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.048182] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.060178] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.060357] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.080381] sd 6:0:0:0: Attached scsi generic sg2 type 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.080646] sd 6:0:0:1: Attached scsi generic sg3 type 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.088381] sd 6:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB) Jan 4 17:30:04 a-ubuntu kernel: [ 291.088988] sd 6:0:0:1: [sdc] Attached SCSI removable disk Jan 4 17:30:04 a-ubuntu kernel: [ 291.200050] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.448044] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.696055] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.832046] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled Jan 4 17:30:04 a-ubuntu kernel: [ 291.832994] sd 6:0:0:0: [sdb] Asking for cache data failed Jan 4 17:30:04 a-ubuntu kernel: [ 291.833001] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:30:04 a-ubuntu kernel: [ 291.834378] sdb: detected capacity change from 8199864320 to 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.835367] sd 6:0:0:0: [sdb] Attached SCSI removable disk Jan 4 17:30:06 a-ubuntu kernel: [ 293.004741] sd 6:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB) Jan 4 17:30:06 a-ubuntu kernel: [ 293.116051] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:21 a-ubuntu kernel: [ 308.228043] usb 2-4: device descriptor read/64, error -110 Jan 4 17:30:36 a-ubuntu kernel: [ 323.444072] usb 2-4: device descriptor read/64, error -110 Jan 4 17:30:36 a-ubuntu kernel: [ 323.660047] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:51 a-ubuntu kernel: [ 338.772085] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:06 a-ubuntu kernel: [ 353.988064] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:07 a-ubuntu kernel: [ 354.204058] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:31:12 a-ubuntu kernel: [ 359.224115] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:17 a-ubuntu kernel: [ 364.344136] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:17 a-ubuntu kernel: [ 364.560037] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:31:22 a-ubuntu kernel: [ 369.580132] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:27 a-ubuntu kernel: [ 374.700126] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:27 a-ubuntu kernel: [ 374.804121] usb 2-4: USB disconnect, device number 3 Jan 4 17:31:27 a-ubuntu kernel: [ 374.804518] sd 6:0:0:0: Device offlined - not ready after error recovery Jan 4 17:31:27 a-ubuntu kernel: [ 374.804600] sd 6:0:0:0: [sdb] No Caching mode page present Jan 4 17:31:27 a-ubuntu kernel: [ 374.804606] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:31:27 a-ubuntu kernel: [ 374.804693] sd 6:0:0:0: [sdb] READ CAPACITY failed Jan 4 17:31:27 a-ubuntu kernel: [ 374.804698] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jan 4 17:31:27 a-ubuntu kernel: [ 374.804704] sd 6:0:0:0: [sdb] Sense not available. Jan 4 17:31:27 a-ubuntu kernel: [ 374.804744] sd 6:0:0:0: [sdb] No Caching mode page present Jan 4 17:31:27 a-ubuntu kernel: [ 374.804748] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:31:27 a-ubuntu kernel: [ 374.804754] sdb: detected capacity change from 8199864320 to 0 Jan 4 17:31:27 a-ubuntu kernel: [ 374.820273] scsi: killing requests for dead queue Jan 4 17:31:27 a-ubuntu kernel: [ 374.852240] scsi: killing requests for dead queue Jan 4 17:31:27 a-ubuntu kernel: [ 374.980054] usb 2-4: new high speed USB device number 4 using ehci_hcd Jan 4 17:31:43 a-ubuntu kernel: [ 390.092059] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:58 a-ubuntu kernel: [ 405.308070] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:58 a-ubuntu kernel: [ 405.524078] usb 2-4: new high speed USB device number 5 using ehci_hcd and the other post is: http://pastebin.ubuntu.com/792915/ and the other bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x04f2 Chicony Electronics Co., Ltd idProduct 0xb008 USB 2.0 Camera bcdDevice 93.27 iManufacturer 2 Chicony Electronics Co., Ltd. iProduct 1 Chicony USB 2.0 Camera iSerial 3 SN0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 565 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 14 Video bFunctionSubClass 3 Video Interface Collection bFunctionProtocol 0 iFunction 1 Chicony USB 2.0 Camera Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 1 Video Control bInterfaceProtocol 0 iInterface 1 Chicony USB 2.0 Camera VideoControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdUVC 1.00 wTotalLength 77 dwClockFrequency 15.000000MHz bInCollection 1 baInterfaceNr( 0) 1 VideoControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 4 iTerminal 0 VideoControl Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 6 (EXTENSION_UNIT) bUnitID 4 guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016} bNumControl 1 bNrPins 1 baSourceID( 0) 3 bControlSize 1 bmControls( 0) 0x01 iExtension 0 VideoControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Camera Sensor bAssocTerminal 0 iTerminal 0 wObjectiveFocalLengthMin 0 wObjectiveFocalLengthMax 0 wOcularFocalLength 0 bControlSize 3 bmControls 0x00000000 VideoControl Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 5 (PROCESSING_UNIT) Warning: Descriptor too short bUnitID 3 bSourceID 1 wMaxMultiplier 0 bControlSize 2 bmControls 0x0000053f Brightness Contrast Hue Saturation Sharpness Gamma Backlight Compensation Power Line Frequency iProcessing 0 bmVideoStandards 0x a NTSC - 525/60 SECAM - 625/50 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 6 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 VideoStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 1 (INPUT_HEADER) bNumFormats 1 wTotalLength 345 bEndPointAddress 129 bmInfo 0 bTerminalLink 2 bStillCaptureMethod 0 bTriggerSupport 1 bTriggerUsage 0 bControlSize 1 bmaControls( 0) 27 VideoStreaming Interface Descriptor: bLength 27 bDescriptorType 36 bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED) bFormatIndex 1 bNumFrameDescriptors 7 guidFormat {59555932-0000-1000-8000-00aa00389b71} bBitsPerPixel 16 bDefaultFrameIndex 1 bAspectRatioX 0 bAspectRatioY 0 bmInterlaceFlags 0x00 Interlaced stream or variable: No Fields per frame: 2 fields Field 1 first: No Field pattern: Field 1 only bCopyProtect 0 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 640 wHeight 480 dwMinBitRate 614400 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 614400 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 2 bmCapabilities 0x00 Still image unsupported wWidth 352 wHeight 288 dwMinBitRate 202752 dwMaxBitRate 6082560 dwMaxVideoFrameBufferSize 202752 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 3 bmCapabilities 0x00 Still image unsupported wWidth 320 wHeight 240 dwMinBitRate 153600 dwMaxBitRate 4608000 dwMaxVideoFrameBufferSize 153600 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 4 bmCapabilities 0x00 Still image unsupported wWidth 176 wHeight 144 dwMinBitRate 50688 dwMaxBitRate 1520640 dwMaxVideoFrameBufferSize 50688 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 5 bmCapabilities 0x00 Still image unsupported wWidth 160 wHeight 120 dwMinBitRate 38400 dwMaxBitRate 1152000 dwMaxVideoFrameBufferSize 38400 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 6 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 800 dwMinBitRate 2048000 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 2048000 dwDefaultFrameInterval 1333333 bFrameIntervalType 2 dwFrameInterval( 0) 1333333 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 7 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 1024 dwMinBitRate 2621440 dwMaxBitRate 23592960 dwMaxVideoFrameBufferSize 2621440 dwDefaultFrameInterval 1333333 bFrameIntervalType 2 dwFrameInterval( 0) 1333333 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 13 (COLORFORMAT) bColorPrimaries 1 (BT.709,sRGB) bTransferCharacteristics 1 (BT.709) bMatrixCoefficients 4 (SMPTE 170M (BT.601)) Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0080 1x 128 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0100 1x 256 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0320 1x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0b20 2x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x1320 3x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 6 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x13e8 3x 1000 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 006 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04d9 Holtek Semiconductor, Inc. idProduct 0x1503 Shortboard Lefty bcdDevice 3.10 iManufacturer 1 iProduct 2 USB Keyboard iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 62 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 101 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered)

  Read the article

• virtual function call from base of base

  - by th3g0dr3d

  hi, let's say i have something like this (very simplified): <pre><code> class base { void invoke() { this-foo(); } virtual void foo() = 0; }; class FirstDerived : public base { void foo() { // do stuff } }; class SecondDerived : public FirstDerived { // other not related stuff } int main() { SecondDerived *a = new SecondDerived(); a-invoke(); } What i see in the debugger is that base::invoke() is called and tries to call this-foo(); (i expect FirstDerived::foo() to be called), the debugger takes me to some unfamiliar assembly code (probably because it jumped to unrelated areas) and after few lines i get segmentation fault. am i doing something wrong here? :/ thanks in advance

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >