Search Results

Search found 64294 results on 2572 pages for 'com port'.

Page 110/2572 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • Port Forwarding(?) TD-W8961nd

    - by rich
    I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

    Read the article

  • Using 2-port LSI 2308-8e card to control 24 SAS HDDs

    - by GregC
    I would like to rely on a RAID-on-chip solution to control 24 SAS hard drives in a direct-attached environment. How would you approach this to get best bandwidth given that I'd like to spend less than $10,000 on the interconnect. I've read that LSI 2308 chip can easily handle 8-drive SSD RAID6 in hardware. I'd like to harness its power to control 24 SAS hard drives over an expander in an external enclosure. Currently I use an Infortrend S24S-G2240 external enclosure. It provides its own controller and expander. I'd like to use LSI 2308 controller for RAID6 somehow instead of the mystery controller in the enclosure. P.S. I tried to create SAS-expander as a tag, but my rep on this site is low.

    Read the article

  • trying to connect to non-standard port over esxi guest network

    - by user52874
    I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

    Read the article

  • Is LiveDrive.com reliable?

    - by Marc
    I'm currently using DropBox (50GB account) which works fine, but at this moment I'm not impressed with its speed. I have a 60down/6up connection and only LiveDrive can use almost the full bandwidth of my connection. Dropbox often is very slow (avg. 100-500Kb/s compared to LD at 6MB/s). If I only look at the speed and storage costs then LD is much better, but I don't have enough experience with LD to be able to say something about reliability. Can anyone comment on this? Thx.

    Read the article

  • Test ethernet port for data loss

    - by Manoj
    We are trying to test the ethernet phy on our linux box for data loss. As of now we just establish a tftp connection to a server to upload and download a file. Whenever a mismatch occurs, it is reported as failure. This is not a very nice test, as any mismatch might have been caused by the network itself and not a phy problem. Can you suggest a way to test the ethernet phy in a better way for data loss? Thanks...

    Read the article

  • Exim - Sender verify failed - rejected RCPT

    - by Newtonx
    While checking on Exim's log messages I found many entries of the following message "Sender verify failed" "rejected RCPT" ... I 'm not an exim expert... I'm afraid Exim is not delivering 100% emails to recipients, because our Email Marketing Application its getting a lower OPEN RATE. Can someone helpe understand this log messages? Is it my server saying "No Such User Here" or a remote server? 174.111.111.11 represents my server IP. Thanks Exim log 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54514 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54515 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 Warning: Sender rate 672.4 / 1h 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 sender verify fail for <fernandagaglianone=oi.com.br--2723--bounce@e-mydomain.com.br>: No Such User Here 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 F=<fernandagaglianone=oi.com.br--2723--bounce@e-mydomain.com.br> rejected RCPT <fernandagaglianone@oi.com.br>: Sender verify failed 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54516 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 Warning: Sender rate 673.3 / 1h 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 sender verify fail for <littlepet.chaves=gmail.com--2723--bounce@e-mydomain.com.br>: No Such User Here 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 F=<littlepet.chaves=gmail.com--2723--bounce@e-mydomain.com.br> rejected RCPT <[email protected]>: Sender verify failed 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54517 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 Warning: Sender rate 674.3 / 1h 2010-10-02 14:00:20 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 sender verify fail for <Luciene_souza_vasconcellos=hotmail.com--2723--bounce@e-mydomain.com.br>: No Such User Here 2010-10-02 14:00:20 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 F=<Luciene_souza_vasconcellos=hotmail.com--2723--bounce@e-mydomain.com.br> rejected RCPT <[email protected]>: Sender verify failed

    Read the article

  • Error while installing phabricator using http://www.phabricator.com/rsrc/install/install_rhel-derivs.sh

    - by Saurav Shah
    The command thats run is yum install httpd git php php-cli php-mysql php-process php-devel php-gd php-pecl-apc php-pecl-json mysql-server I get these errors. How do I fix these? Error: Package: php-devel-5.3.3-3.el6_2.6.x86_64 (rhel6-optional) Requires: php = 5.3.3-3.el6_2.6 Available: php-5.3.3-3.el6.x86_64 (rhel6-base) php = 5.3.3-3.el6 Installing: php-5.3.3-14.el6_3.x86_64 (rhel6-updates) php = 5.3.3-14.el6_3 Error: Package: php-process-5.3.3-3.el6_2.6.x86_64 (rhel6-optional) Requires: php-common = 5.3.3-3.el6_2.6 Available: php-common-5.3.3-3.el6.x86_64 (rhel6-base) php-common = 5.3.3-3.el6 Installing: php-common-5.3.3-14.el6_3.x86_64 (rhel6-updates) php-common = 5.3.3-14.el6_3

    Read the article

  • Exposing a WebServer behind a firewall without Port Forwarding

    - by pbreault
    We are deploying web applications in java using tomcat on client machines across the country. Once they are installed, we want to allow a remote access to these web applications through a central server, but we do not want our clients to have to open ports on their routers. Is there a way to tunnel the http traffic so that people connected to the central server can access the web applications that are behind a firewall ? The central server has a static ip address and we have full control over it. Right now, it is a windows box but it could be changed to a linux box if necessary. Our clients are running windows xp and up. We don't need to access the filesystem, we only want to access the web application through a browser. We have looked at reverse ssh tunneling but it shows scaling problem since every packet would have to pass through the central server.

    Read the article

  • Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

    - by Javier
    I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

    Read the article

  • Error opening microsoft.com in Windows 7

    - by Ilnur
    I need help with my browsers. In Windows 7 Basic I have 2 browsers installed: Internet Explorer 8 and Google Chrome. When I try to open pages which are associated with Microsoft (like Live and others), my browser crashes; Internet Explorer 8 crashes too. But Opera (I've installed it later) works fine with those pages. P.S. I tried to scan my PC for trojans and viruses, but it's clean.

    Read the article

  • Can Xen be configured to dedicate only one port of a dual-port NIC to a domU?

    - by jamieb
    I'm using CentOS 5.4 on my dom0 with a stock Xen kernel. I'm attempting to use the pciback module to hide some of the Ethernet ports from the host and reserve them for a domU I intend to use for a firewall (process described here). However, when I launch the domU, I get the following error message: Using config file "/etc/xen/firewall". Error: pci: improper device assignment specified: pci: 0000:01:04.0 must be co-assigned to the same guest with 0000:01:06.0, but it is not owned by pciback. lspci gives me the following output: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) From the sound of the error message, it seems like I also need to dedicate eth0 (PCI ID 01:04.0) to the domU. Am I correct? If not, what am I doing wrong? Thanks!

    Read the article

  • Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

    - by NickToyota
    Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

    Read the article

  • VirtualBox serial port, limit of two?

    - by Evan Carroll
    Using VirtualBox, Is there a limit of two serial ports per VM? I'm currently engaging in a task that requires more than two, but less than or equal to four ports. I'm at a loss of what to do to get COM3 and COM4 up? How do I do it if the Virtual Box GUI doesn't currently support more than two serial host devices? Can I configure them external to the GUI? Is there a hard-cap on two devices? And, if so, for the love of god, please entertain me with the reasoning? I know Windows and Linux don't impose such a limit, it would seem awkward to impose it in virtualization layer. This is for cheap dial-in project with proprietary Windows tools. I'm using a Quatech serial multiport adapter to provide the ports to multimodems.

    Read the article

  • invalid argument in bash script when port is bad

    - by user273689
    When I do this command I get an error when there is something wrong with the eth3. RESC="1234" RESD="1234" RESO="1234" RESC=$(ssh -q vmx@$1 cat /sys/class/net/$2/carrier) RESO=$(ssh -q vmx@$1 cat /sys/class/net/$2/operstate) RESD=$(ssh -q vmx@$1 cat /sys/class/net/$2/dormant) cat: /sys/class/net/eth3/carrier: Invalid argument cat: /sys/class/net/eth3/dormant: Invalid argument How can I use the invalid argument inside the RESC and RESD variable Thanks

    Read the article

  • FreeBSD high load loopback interface

    - by user1740915
    I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

    Read the article

  • Outlook 2010 exchange setup prompts for [email protected] rather than [email protected]

    - by Force Flow
    We use a hosted exchange service. When users want to set up Outlook 2010 to access their account, they open Outlook and run through the configuration steps. Autodiscover is enabled, and in the user's active directory profile, their email address is in the email field. However, when the configuration process reaches a point where they are prompted for their email account's username and password, their active directory username is filled in by default instead of their email address. Is there a way to fix that? Users get confused and try to enter their email password over and over again and wonder why it doesn't work (and completely miss/ignore the "use another account" button even though they have instructions right in front of them). I'm also using the Office 2010 ADM's in group policy, but I haven't yet seen an option to specify what gets auto-populated in that windows security prompt.

    Read the article

  • USB port not recognising mouse on first bootup

    - by Pacifika
    On a computer here when first powered on the USB wired mouse is not recognised. The light under the mouse is not lit up. Other usb hub's and keyboards work fine. Disconnecting it and reconnecting it fixes the issue, even after a restart - after the pc is switched off for a length of time (for example overnight) the problem reappears. I swapped the mouse, updated the bios and installed updated intellimouse drivers, turned of power saving on the usb ports. Any ideas?

    Read the article

  • How to do complex port forwarding (sort of)

    - by adnan kamili
    I have a very different situation. My laptop named A, another machine B(ip-172.16.28.3) with ssh server installed and i have an account on that machine, the third machine C(ip-172.16.24.3) is a proxy server. All the machines are within a LAN, but 1- Machine B can connect to A as well as C 2- Machine A i.e.my pc, it can only connect to B and not C Now to use internet, i do the following: ssh -X [email protected] Then i type firefox and i use the firefox of machine B with proxy setings as 172.16.24.3:3128 Instead of using firefox of B, i want to use my local firefox. Is there a way through which i can connect to C via B and use my local firefox for browsing

    Read the article

  • Is VGA port hot-pluggable?

    - by Martin Bøgelund
    In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

    Read the article

  • BEAST (Browser Exploit Against SSL/TLS) Vulnerability on Port 25 for Postfix

    - by Abdul Haseeb
    I am failing a PCI Compliant scan. I have successfully used RC4 ciphers for Apache setup but my Postfix configuration is still not fixed. What TLS configuration should i use in my main.cf file. my current configuration is as follows # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes tls_preempt_cipherlist = yes smtpd_tls_protocols = !SSLv2 smtpd_tls_mandatory_protocols = !SSLv2, SSLv3 smtpd_tls_cipherlist = RC4-SHA:+TLSv1:!SSLv2:+SSLv3:!aNULL:!NULL smtp_tls_cipherlist = RC4-SHA:+TLSv1:!SSLv2:+SSLv3:!aNULL:!NULL smtpd_tls_security_level = encrypt

    Read the article

  • Added autossh in rc.local, but the dynamic port forwarding won't work

    - by rankjie
    I am using Rasbian on my newly arrived Rasp.Pi, and decided to make it my own proxy server. Now I need to set up a ssh tunnel on the Pi to my Linode server, and make it auto start with the system. What did I do: Add this line to /etc/rc.local autossh -f theRemoteServer -N -D 5555 -L 1234:localhost:22 After I reboot, I found out that I can't use the localhost:5555 as a socks proxy. So I type the command ps -A | grep ssh then I can see the autossh and ssh all running: pi@raspberrypi ~ $ ps -A | grep ssh 2018 ? 00:00:00 sshd 2116 ? 00:00:00 autossh 2119 ? 00:00:00 sshd 2195 ? 00:00:00 sshd 3173 ? 00:00:00 ssh (I've installed autossh, and the command works if I type it manually.) (I use the passwordless key auth, so I don't have to enter password.) Much appreciated and sorry for my poor English.

    Read the article

  • meta.stackoverflow.com has a problem

    - by asker
    Sorry, this is off topic, but fact evolved that meta.stackoverflow does only allow posting with openid despite stating possibility of post per nick/email. Posted here because underlying prob stemmed from serverfault. So here is a copy: Despite stating that submission via nick/email were possible, required fields are not given. Please fix or state that critique be only issued non anonymously. Tags OpenID Login Get an OpenID Oops! Your question couldn't be submitted because: must include one of these tags -- bug feature-request discussion support users with less than 99 reputation can't create new tags. The tag 'limit' is new. Try using an existing tag instead. name and email, or your OpenID, are missing

    Read the article

  • How does this main domain have a CNAME record?

    - by TRiG
    I was under the impression that only subdomains could have CNAME records: main domains need to define all their own records. However, apt-get.com seems to have only a CNAME record. How can this work? $ dig apt-get.com ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45743 ;; flags: qr rd ra; QUERY: 1, ANSWER: 9, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN A ;; ANSWER SECTION: apt-get.com. 86336 IN CNAME thie5ku9.dsgeneration.com. thie5ku9.dsgeneration.com. 60 IN A 208.73.211.242 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.246 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.166 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.232 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.161 thie5ku9.dsgeneration.com. 60 IN A 208.73.210.233 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.186 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.188 ;; Query time: 59 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:05:48 2014 ;; MSG SIZE rcvd: 193 $ dig apt-get.com ns ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43831 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN NS ;; Query time: 26 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:12:37 2014 ;; MSG SIZE rcvd: 29 $ dig apt-get.com ns @b.gtld-servers.net ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns @b.gtld-servers.net ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 38228 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 2, ADDITIONAL: 2 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;apt-get.com. IN NS ;; AUTHORITY SECTION: apt-get.com. 172800 IN NS ns1.domainrecover.com. apt-get.com. 172800 IN NS ns2.domainrecover.com. ;; ADDITIONAL SECTION: ns1.domainrecover.com. 172800 IN A 66.45.232.66 ns2.domainrecover.com. 172800 IN A 65.23.159.179 ;; Query time: 70 msec ;; SERVER: 192.33.14.30#53(192.33.14.30) ;; WHEN: Tue Jun 10 15:07:05 2014 ;; MSG SIZE rcvd: 111 The domain does resolve. I get the following headers: GET / HTTP/1.1 User-Agent: Testing_Sniffer/4.15 Host: apt-get.com Accept: */* HTTP/1.0 200 (OK) Cache-Control: private, no-cache, must-revalidate Connection: Keep-Alive Pragma: no-cache Server: Oversee Turing v1.0.0 Content-Length: 1347 Content-Type: text/html Expires: Mon, 26 Jul 1997 05:00:00 GMT Keep-Alive: timeout=3, max=96 P3P: policyref="http://www.dsparking.com/w3c/p3p.xml", CP="NOI DSP COR ADMa OUR NOR STA" Set-Cookie: parkinglot=1; domain=.apt-get.com; path=/; expires=Wed, 11-Jun-2014 14:10:37 GMT <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd"> <!-- turing_cluster_prod --> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>apt-get.com</title> <meta name="keywords" content="apt-get.com" /> <meta name="description" content="apt-get.com" /> <meta name="robots" content="index, follow" /> <meta name="revisit-after" content="10" /> <meta name="viewport" content="width=device-width, initial-scale=1.0" /> <script type="text/javascript"> document.cookie = "jsc=1"; </script> </head> <frameset rows="100%,*" frameborder="no" border="0" framespacing="0"> <frame src="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A" name="apt-get.com"> </frameset> <noframes> <body><a href="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A">Click here to go to apt-get.com</a>.</body> </noframes> </html>

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >