Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 110/235 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • In a GUI based Application in Linux It is working properly in some systems,But segmentation fault (Because of SIGSEGV signal) is coming in others.Why? [closed]

    - by Sreejith
    The application consists of Driver code,a Source Object file(.so) ,and a Application code to interact with a hardware Card.. The problem comes in a mmap().It reads address from a card. But it is not getting the correct address in some systems.The Error is because of It is receiving a SIGSEGV signal and segmentation fault followed to that.But in some system which having the same version of kernel is not at all facing the problem and working properly. So please any one suggest the Reason and Remedy for this Problem.

    Read the article

  • Should I use the ATI proprietary or free drivers with two Crossfire HD5850s?

    - by Dekel
    I own 2 XFX Radeon HD 5850 in crossfire configuration connected to 3 24" monitors. I really want to make Ubuntu my daily OS but can't seem to find the best configuration to use. Some threads say that the free driver is better then the ATI one and some say the new Catalyst fully takes advantage of the card capabilities. Anyone out there with a similar setup? What are your recommendations for a good production in 12.04 setup?

    Read the article

  • How can I force WiFi connection to only use ipv4?

    - by krasilich
    I have Broadcom bcm43224 wifi card with proprietary broadcom sta driver. At home wifi connection works well, but in the office when I ping some resource there is a lot of loss packets and I cant browse websites. I have tried another way to check internet connection - download file with wget. wget google.com - very slow speed wget -4 google.com - normal speed So, it seems that the problem is with the ipv6 configuration at the office, can I force my wifi connection to use only ipv4 and completely ignore ipv6 ?.

    Read the article

  • How to run sunspots?

    - by user111317
    I am trying to use SUN Spots with Ubuntu, but for some reason the SUN Spot Manager app is not seeing connected spot on USB port. Possibility that cdc_acm driver is not installed has been mentioned elsewhere, but I am complete beginner when it comes to Ubuntu, so I don't know where to find it or how to install it. Any input on this matter would be more than welcome. Addition: ls /dev/tty* returned the list that contains /dev/ttyACM0, but SUN spot is still not recognizing it.

    Read the article

  • so disappointed at ubuntu 12.04 [closed]

    - by Min
    it's been almost a month I've installed ubuntu I can't afford windows cd anymore it is my fault that I didn't dual boot it but, it doesn't make sense in that I can't use my own graphic card in my own computer because certain company doesn't support the driver card for the OS it is seemingly ridiculous that I can't even run a simple 2d game or not even a flash game with this OS a video of 480 and up doesn't run for closely a month I've tried my best to run everything my computer spec provides, but nothing works. not even sound quality

    Read the article

  • Ubuntu 12.10 Jerky mouse movments

    - by Bar Hofesh
    As the Title indicates I have some problem with delicate movement of the mouse in Ubuntu 12.10 fresh installation. The jerkiness is shown more at small and slow movements when the mouse will move a 2 millimeters to any random positions every 5 centimeters of movements. my mouse is a Microsoft Sidewinder Gaming mouse. is there any driver I can use to fix it or any configuration? this is happening both in unity or inside games and programs.

    Read the article

  • ????????Oracle WebLogic Server - JDBC??????|WebLogic Channel|??????

    - by ???02
    WebLogic Server????????????????????????????JDBC???????????????? ?? JDBC????????????????????(????????????)??????????????????????????????????????? ??JDBC?????????????????????????????????????????????(????DB?????DB???ID????????)????????????????????????????????????????????????????????????????????????????????? ¦JDBC????????¦WebLogic Server?JDBC??????¦WebLogic Server?JDBC?????????¦WebLogic Server?JDBC?????????¦WebLogic Server????????????¦WebLogic Server?JDBC??????????Oracle JDBC Driver?????¦WebLogic Server?JDBC????????????/????¦Appendix:???????????JDBC??????????????????????????????????????http://www.oracle.com/technetwork/jp/ondemand/application-grid/wls11g-jdbcdatasource-201107-otn-sc-439531-ja.pdf

    Read the article

  • LSI RAID monitor reports "Consistency Check inconsistency logging disabled"

    - by carlpett
    I have a server with a LSI MegaRAID 9261-8i controller. Recently I started getting alerts like this one: Controller ID: 1 Consistency Check inconsistency logging disabled, too many inconsistencies on VD: 0 Generated on:Sat May 12 04:06:40 2012 SYSTEM DETAILS--- IP Address: 192.168.1.29 OS Name: Windows 7 x64 OS Version: 6.01 Driver Name: megasas.sys Driver Version: 4.5.1.64 IMAGE DETAILS--- BIOS Version: 2.120.33-1197 Firmware Package Version: 12.12.0-0045 Firmware Version: 3.21.00_4.11.05.00_0x05000000 VD 0 is a RAID mirror containing the system disk. I have searched and read, but cannot find any trace of how to actually do anything about this. I tried running a scandisk but that did not find anything (as I expected, since scandisk reads the disks as exposed by the controller, right?). The MegaRAID Storage Manager does not as far as I can see have any options for checking or fixing physical disks. The program claims the VD is "healty", and both disks have Error count 0. Also a bit strange is the System details in the message... The IP address is associated with the RAS (dial in) interface, and the OS should be Windows Server 2011 SBS. Has anyone else experienced this before? What can be done?

    Read the article

  • Why is firefox 4 not HW accelerated?

    - by acidzombie24
    At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

    Read the article

  • Intermittent Windows Server 2008 BSOD and restart

    - by Timka
    Our EC2 Instance (Windows Server 2008) crashed multiple times for the past 3 months (last time was today at 1:05 EST). Upon reviewing MEMORY.DMP file we noticed that possible cause of the crashes is rhelnet.sys (RedHat PV NIC Driver). Server's Event Viewer has the following records right after the crash: Critical - Kernel Power: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. BugCheck: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x000000000000002d, 0x0000000000000002, 0x0000000000000000, 0xfffff88001402d14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 100113-35849-01. Could this be a hardware issue? Would it help if we stop and start the instance? Or is this more likely that this is caused by the software running on the system? [Update 10.01.2013] Amazon Rep suggested to update RH drivers to Citrix PV drivers on our instance: Upgrading PV Drivers [Update 10.08.2013] We performed a drivers upgrade on the cloned instance. Right after the upgrade we noticed the following errors in our Event viewer: Xennet6 errors in Event Viewer (Event ID# 5001) After digging a bit more I found this article suggesting to install the latest Citrix drivers. Unfortunately, this didn't help us at all and our cloned instance became unresponsive. [Update 10.08.2013 2] I recreated an instance and updated PV drivers again. After searching on Internet I found this article where Amazon Rep explains that: "Event ID 5001 from source Xennet6 cannot be found" message does not indicate anything wrong, just that the PV driver is looking for a feature that we have not implemented in our version of Xen. I will keep my test system running for a while to see if there any issues with it.

    Read the article

  • What is my miniport's service name?

    - by Ian Boyd
    i am trying to query the physical sector size of my drive using fsutil: C:\Windows\system32>fsutil fsinfo ntfsinfo c: NTFS Volume Serial Number : 0x78cc11b2cc116c1e Version : 3.1 Number Sectors : 0x000000003a382fff Total Clusters : 0x00000000074705ff Free Clusters : 0x00000000022fc29b Total Reserved : 0x00000000000007d0 Bytes Per Sector : 512 Bytes Per Physical Sector : <Not Supported> Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x00000000305c0000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x0000000003a382ff Mft Zone Start : 0x0000000006951940 Mft Zone End : 0x0000000006951c80 RM Identifier: 19B22CBE-570D-19DE-9C72-CD758F800DDC You can see that the Bytes Per Physical Sector value is Not Supported: Bytes Per Physical Sector : <Not Supported> In KB Article Microsoft support policy for 4K sector hard drives in Windows, Microsoft says: If fsutil.exe continues to display "Bytes Per Physical Sector : " after you apply the latest storage driver and the required hotfixes, make sure that the following registry path exists: HKLM\CurrentControlSet\Services\<miniport’s service name>\Parameters\Device\ Name: EnableQueryAccessAlignment Type: REG_DWORD Value: 1: Enable The only thing i don't know is what my Miniport's service name is. What is my miniport's service name. i know that my SATA drives are in AHCI mode, and AHCI uses the msahci driver service: Is that my miniport service? "MSAHCI"? See also Hitachi - Advanced Format Technology Brief RMPrepUSB - Advanced Format (4K sector) hard disks Microsoft support policy for 4K sector hard drives in Windows OSR Online - Advance Disk Format support in Storport Virtual Mniport diver Default cluster size for NTFS, FAT, and exFAT Wikipedia - Advanced Format

    Read the article

  • Using unixODBC to connect to Oracle server

    - by Paul
    I am trying to configure our web server (RHEL 5.4 x86) to connect to an Oracle database using unixODBC. I have installed unixODBC-2.2.11-7.1.1, which yum tells me is the latest version. I have also installed the Oracle InstantClient 11.2 and the Oracle InstantClient ODBC library. I have symlinked the all the .so files in /usr/lib/oracle/11.2/client/lib to /usr/lib. I have set $LD_LIBRARY_PATH to /usr/lib/, $ORACLE_HOME to /usr/lib/oracle and $TNS_ADMIN to the directory containing my (valid) Tnsnames.ora file. Here are the contents of my /etc/odbcinst.ini file: [Oracle] Description = Oracle ODBC Connection Driver = /usr/lib/libsqora.so.11.1 Setup = FileUsage = and my /etc/odbc.ini file: [Oracle] Application Attributes = T Attributes = W BatchAutocommitMode = IfAllSuccessful CloseCursor = F DisableDPM = F DisableMTS = T Driver = Oracle EXECSchemaOpt = EXECSyntax = T Failover = T FailoverDelay = 10 FailoverRetryCount = 10 FetchBufferSize = 64000 ForceWCHAR = F Lobs = T Longs = T MetadataIdDefault = F QueryTimeout = T ResultSets = T ServerName = //<host>:<port>/<db> SQLGetData extensions = F Translation DLL = Translation Option = 0 UserID = (ServerName has been edited...host, port, and db are actually there, and correct) When I run isql I get $ isql -v Oracle isql: symbol lookup error: /usr/lib/libsqora.so.11.1: undefined symbol: SQLGetPrivateProfileStringW And running dltest gives me $ dltest Oracle SQLConnect [dltest] ERROR dlopen: Oracle: cannot open shared object file: No such file or directory If anyone has any insights I would be grateful, I've been trying to get this to connect for about 5 hours now... I am going home for the night, but will gladly provide more details, if necessary, tomorrow morning, to anyone willing to help...

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • Xorg server won't start after fresh install of Debian 5.04, screen goes blank (Intel Atom D510(Pinet

    - by Kamil Zadora
    Hello, I have installed Debian 5.04 Lenny on my new Intel D510MO motheboard. I fixed some issues with incorrect drive mapping (for some reason during installation my hdd was on sdb, after a restart it is under sda - fixed in grub), and now I am struggling with getting graphical enviroment up and running, I installed the graphical enviroment using the Debian installer. I am not an linux expert by any means, I assume that I need to edit the xorg.conf file. Any hints appreciated! UPDATE1: No change after dpkg-reconfigure xserver-xorg Here is my current xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection UPDATE2: I have installed vnc4server package. I can connect over vnc from my windows 7 laptop and i see empty desktop with terminal window open. Seems that the xserver and gdm are running but they cant talk with my GPU. I am not sure if a can use any gui tool to configure it overthe vnc, as all I see is the terminal window, no taskbars etc. UPDATE3: My current Xorg.0.log http://pastebin.pl/18918 The graphic chipset integrated into the D510 processor is Intel 945GC

    Read the article

  • Can't access SQL Server 2008 from workstations, but can from server

    - by Kev
    We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

    Read the article

  • Howto make a diff of a bios or backup/ restore all bios settings

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • Lenovo Mini Wireless Keyboard N5901: Remap orange "My Computer" button

    - by Jon Schneider
    I have a Lenovo Mini Wireless Keyboard N5901 (a.k.a. Part No. 57Y6336) that I'm using with an HTPC running Windows 7. The remote comes with an orange button in the top-left corner that by default, when pressed, opens the Windows "My Computer" window. I would like to remap / reprogram this button to act like the green "Windows Media Center" button instead on a Windows Media Center (WMC) remote; that is, open Windows Media Center if it isn't already open, or go to the WMC homepage if WMC is already open. I've tried several keyboard-remapping utilities (as recommended in other, more general "how to remap keyboard key?" SuperUser.com questions) including SharpKeys, Key Mapper, and KeyTweak, with no luck so far. None of these utilities recognize the orange button -- they all do recognize that some key was pressed, but display a value for the key of "unsupported" or something similar. I was able to use a utility called Keyboard Scan Code Generator to determine that a press of the orange button has a KeyData value of 16777217 (0x1000001), and a "Virtual Code" value of 182. (The other "media" buttons on the N5901 have the same KeyData value, but different Virtual Code values). I'm not sure at this point where in Windows this keystroke is being interpreted as a command to open "My Computer." There is no special software / driver for this device; it worked out of the box with Windows 7, no special driver install necessary. Is there any way to accomplish this? Thanks in advance for any suggestions!

    Read the article

  • ORA-12705: Cannot access NLS data files or invalid environment specified

    - by Mohit Nanda
    I am getting this error while trying to create a connection pool, on my Oracle database, Oracle 10gR2. java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified I am able to connect to the database over sqlplus & iSQLPlus client, but when I try to connect using this Java program, I get this error just when the connection pool is to be initialised and it does not initialise the connection pool. Can someone please help me resolving it? DB Version: Oracle version 10.2.0.1 OS: RHEL 4.0 Here is a barebone, java code which is throwing this error, while connecting to my database. import java.sql.*; public class connect{ public static void main(String[] args) { Connection con = null; CallableStatement cstmt = null; String url = "jdbc:oracle:thin:@hostname:1521:oracle"; String userName = "username"; String password = "password"; try { System.out.println("Registering Driver ..."); DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver()); System.out.println("Creating Connection ..."); con = DriverManager.getConnection(url, userName, password); System.out.println("Success!"); } catch(Exception ex) { ex.printStackTrace(System.err); } finally { if(cstmt != null) try{cstmt.close();}catch(Exception _ex){} if(con != null) try{con.close();}catch(Exception _ex){} } } }

    Read the article

  • Why can't I reconnect to my Philips SHB9000 bluetooth headset?

    - by Thomas Eyde
    This is so annoying. When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

    Read the article

  • Unable to connect Xend with virt-manager

    - by Majid Azimi
    I have installed debian 6.0.1a. I have install all XEN stuff. including xen kernel, libvirtd, ... but when i want to connect xend, virt-manager shows me this: Verify that: A Xen host kernel was booted The Xen service has been started details: Unable to open connection to hypervisor URI 'xen:///': unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 971, in _try_open None], flags) File "/usr/lib/python2.6/dist-packages/libvirt.py", line 111, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied here is uname output: Linux debian 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux and also xend and libvirtd is runnig: root@debian:/home/mazimi# /etc/init.d/libvirt-bin status Checking status of libvirt management daemon: libvirtd running. root@debian:/home/mazimi# /etc/init.d/xend start Starting Xen daemons: xenstored xenconsoled xend. permissions for livbirt-sock: root@debian:/home/mazimi# ls -alih /var/run/libvirt/ total 12K 671017 drwxr-xr-x 3 root root 4.0K Apr 15 13:54 . 654083 drwxr-xr-x 18 root root 4.0K Apr 15 13:54 .. 670901 srwxrwx--- 1 root libvirt 0 Apr 15 13:54 libvirt-sock 670928 srwxrwxrwx 1 root libvirt 0 Apr 15 13:54 libvirt-sock-ro 670870 drwxr-xr-x 2 root root 4.0K Apr 15 02:34 qemu and also we have group named libvirt in /etc/group When running libvirtd with verbose mode it behaves kind of stange: root@debian:/var/log/libvirt# /usr/sbin/libvirtd --verbose 17:26:55.841: warning : qemudStartup:1832 : Unable to create cgroup for driver: No such device or address 17:26:56.128: warning : lxcStartup:1900 : Unable to create cgroup for driver: No such device or address and waits infinitely.

    Read the article

  • Mapping printers using Group Policy Preferences; works on Windows XP, not on Windows 7 x64

    - by Graeme Donaldson
    I'm trying to use Group Policy Preferences to manage user connections to shared printers. The print server is Windows Server 2003 R2 Std edition. Several printers are installed, and I've added x64 editions of all the drivers to the print server as well. I've created a new GPO containing the printer preference settings. Printer mappings are targeted based on AD security group membership. I log on to a Windows XP PC with the Group Policy CSEs installed and the printer maps perfectly. I log on to a Windows 7 x64 PC and it doesn't map. If I manually connect to the shared printer, I get a prompt which asks me to confirm if I trust the server before installing the driver, and then it works perfectly. I have domain admin rights and my UAC settings have not been changed from the default, i.e. UAC is enabled and the default level is selected. Is the printer mapping failing because it's unable to prompt me to install the driver, or is there something else afoot?

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >