Search Results

Search found 7081 results on 284 pages for 'idle processing'.

Page 110/284 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • Real benefits of tcp TIME-WAIT and implications in production environment

    - by user64204
    SOME THEORY I've been doing some reading on tcp TIME-WAIT (here and there) and what I read is that it's a value set to 2 x MSL (maximum segment life) which keeps a connection in the "connection table" for a while to guarantee that, "before your allowed to create a connection with the same tuple, all the packets belonging to previous incarnations of that tuple will be dead". Since segments received (apart from SYN under specific circumstances) while a connection is either in TIME-WAIT or no longer existing would be discarded, why not close the connection right away? Q1: Is it because there is less processing involved in dealing with segments from old connections and less processing to create a new connection on the same tuple when in TIME-WAIT (i.e. are there performance benefits)? If the above explanation doesn't stand, the only reason I see the TIME-WAIT being useful would be if a client sends a SYN for a connection before it sends remaining segments for an old connection on the same tuple in which case the receiver would re-open the connection but then get bad segments and and would have to terminate it. Q2: Is this analysis correct? Q3: Are there other benefits to using TIME-WAIT? SOME PRACTICE I've been looking at the munin graphs on a production server that I administrate. Here is one: As you can see there are more connections in TIME-WAIT than ESTABLISHED, around twice as many most of the time, on some occasions four times as many. Q4: Does this have an impact on performance? Q5: If so, is it wise/recommended to reduce the TIME-WAIT value (and what to)? Q6: Is this ratio of TIME-WAIT / ESTABLISHED connections normal? Could this be related to malicious connection attempts?

    Read the article

  • Why does this preseed for gitolite fail?

    - by troutwine
    I'm installing gitolite on a Debian Squeeze box with the following preseed: gitolite gitolite/gituser string git gitolite gitolite/adminkey string ssh-rsa AAAAB3ECT gitolite gitolite/gitdir string /var/lib/git On installation: # debconf-set-selections /var/cache/debconf/gitolite.preseed # apt-get install gitolite Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: git-daemon-run gitweb The following NEW packages will be installed: gitolite 0 upgraded, 1 newly installed, 0 to remove and 26 not upgraded. Need to get 0 B/114 kB of archives. After this operation, 348 kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package gitolite. (Reading database ... 24715 files and directories currently installed.) Unpacking gitolite (from .../gitolite_1.5.4-2+squeeze1_all.deb) ... Setting up gitolite (1.5.4-2+squeeze1) ... adduser: The home dir must be an absolute path. dpkg: error processing gitolite (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: gitolite E: Sub-process /usr/bin/dpkg returned an error code (1) Why? The pre-seed was extracted from a manually configured installation, per here and exists without issue on another machine.

    Read the article

  • Server 2012, Jumbo Frames - should I expect problems?

    - by TomTom
    Ok, this sound might stupid - but is there any negative on just enabling jumbo frames in practice? From what I understand: Any switch or ethernet adapter that sees a jumbo frame it can not handle will just drop it. TCP is not a problem as max frame size is negotiated in the setinuo phase. UCP is a theoretical problem as a server may just send a LARGE UDP packet that gets dropped on the way. Practically though, as UDP is packet based, I do not really think any software WOULD send a UDP packet larger than 1500 bytes net without app level configuration changes - at least this is how I do my programming, as it is quite hard to get a decent MTU size for that without testing yourself, so you fall back in programming to max 1500 packets. The network in question is a standard small business network - we upgraded now from a non managed 24 port switch to a 52 port switch with 4 10g ports (netgear - quite cheap) and will mov a file server to 10g for also ISCSI serving. All my equipment on the Ethernet level can handle minimum 9000 bytes and due to local firewalls I really want to get packets larger (less firewall processing), but the network is also NAT'ed to the internet. On top, different machines move around (download) large files (multi gigabyte area) quite often for processing. The question is - can I expect problems when I just enable jumbo frames? Again, this is not totally ignorance - I just don't see programs sending more than 1500 byte UDP packets (if that is a practical problem please tell me) and for TCP the MTU is negotiated anyway. if there is a problem I can move to a dedicated VLAN, but this has it's own shares of problems as basically most workstations must then be on both VLAN's.

    Read the article

  • Whats the best way to update Ubuntu 9.04?

    - by Fu86
    I have a Ubuntu 9.04 server which has no packase support anymore. If I want to update my package lists, I get th following errors: Err http://de.archive.ubuntu.com jaunty-security/multiverse Packages 404 Not Found [IP: 141.30.13.10 80] W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/jaunty/main/binary-amd64/Packages 404 Not Found [IP: 141.30.13.10 80] .... I read at the official Ubuntu-Support-Page, that there is a update-manager-core-Package to upgrade to a new release. Unfortunately I dont have this package installed and I am unable to install it because of the lack of package sources. EDIT: Installing the package update-manager-core from another release doesn't work because it depends on a higher version of python-apt. (Tried with 10.04) $ dpkg -i update-manager-core_0.134.7_amd64.deb Selecting previously deselected package update-manager-core. (Reading database ... 28743 files and directories currently installed.) Unpacking update-manager-core (from update-manager-core_0.134.7_amd64.deb) ... dpkg: dependency problems prevent configuration of update-manager-core: update-manager-core depends on python-apt (>= 0.7.13.4ubuntu3); however: Version of python-apt on system is 0.7.9~exp2ubuntu10. update-manager-core depends on python-gnupginterface; however: Package python-gnupginterface is not installed. dpkg: error processing update-manager-core (--install): dependency problems - leaving unconfigured Errors were encountered while processing: update-manager-core So, whats the best way to upgrade to to current Release without reinstalling the complete (virtual) server?

    Read the article

  • AWS elastic load balancer basic issues

    - by Jones
    I have an array of EC2 t1.micro instances behind a load balancer and each node can manage ~100 concurrent users before it starts to get wonky. i would THINK if i have 2 such instances it would allow my network to manage 200 concurrent users... apparently not. When i really slam the server (blitz.io) with a full 275 concurrents, it behaves the same as if there is just one node. it goes from 400ms response time to 1.6 seconds (which for a single t1.micro is expected, but not 6). So the question is, am i simply not doing something right or is ELB effectively worthless? Anyone have some wisdom on this? AB logs: Loadbalancer (3x m1.medium) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 11.668 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 4285.10 [#/sec] (mean) Time per request: 23.337 [ms] (mean) Time per request: 0.233 [ms] (mean, across all concurrent requests) Transfer rate: 1661.35 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 2 4.3 2 63 Processing: 2 21 15.1 19 302 Waiting: 2 21 15.0 19 261 Total: 3 23 15.7 21 304 Single instance (1x m1.medium direct connection) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 9.597 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 5210.19 [#/sec] (mean) Time per request: 19.193 [ms] (mean) Time per request: 0.192 [ms] (mean, across all concurrent requests) Transfer rate: 2020.01 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 9 128.9 3 3010 Processing: 1 10 8.7 9 141 Waiting: 1 9 8.7 8 140 Total: 2 19 129.0 12 3020

    Read the article

  • Install VirtualBox on Ubuntu 12.04.1 (on [Samsung] Chromebook)

    - by iphonedev7
    I have dual booted Ubuntu Linux 12.04.1 LTS on my Samsung Series 5 ChromeBook, and am trying to run/install Oracle VirtualBox (from the generic .run file downloaded from their website). However, every time I try to run it (as root from the command line), it gives me the following error occurs: Please install the build and header files for your current Linux kernel. The current kernel version is 3.4.0 Problems were found which would prevent VirtualBox from installing. I have tried the version from the Software Center, as well as the command line installation, both of which gave me errors based on my linux-headers/linux-kernel/linux-[kernel]-image. Here's an error I keep getting (on the command line): First Installation: checking all kernels... It is likely that 3.4.0 belongs to a chroot's host Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic ERROR (dkms apport): kernel package linux-headers-3.5.0-18-generic is not supported Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ...And one of the more cryptic errors I get when trying to start any Virtual Machine: Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface: IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}

    Read the article

  • Device CAL, User Cal or Processor license needed for SQL 2008 (architecture explained inside)?

    - by nycgags
    So we have a number of servers in the Amazon cloud running SQL Server Standard edition to aggregate data. For that purpose we are fine, the licensing is handled by our contract with Amazon, no problem there. For the beefier work, we want to install Enterprise Edition (EE) on our servers processing raw data so that we can take advantage of table partitioning. We currently have 3 servers aggregating data from about 40 node servers, all 43 of these servers are running standard edition which is fine. We also have 4 servers running standard processing the raw data, but I think we can get away with 2 (for redundancy) running Enterprise Edition. We have 2-3 dba's that access these DW servers for maintenance (using the same windows login via remote desktop). So visually: 40 -- 3 -- [2] -- 2 -- 1 nodes -- aggregators -- raw (which we want to run EE) -- calculators -- datawarehouse Nodes PUSH to aggregators, Raws PULL from aggregators, Calculators PULL from Raw, Calculators PUSH to datwarehouse I am specifying the push vs. pull in case that changes how the # of licenses is calculated. Q1) how many device (or user) CAL's do we need? Q2) do I need to speak with someone from MSFT to find out if it is ok to install in the Amazon Cloud (Amazon said we need to verify it is ok in our license terms)? Q3) what happens if another device tries to access a server with the limited number of device CAL's? Q4) Are the device CAL's simultaneous number of devices or total? Q5) Do Device and User CAL's cost the same or is there a difference? Q6) Would we need to buy a processor license (we are hoping not to)?

    Read the article

  • Performance data collection for short-running, ephemeral servers

    - by ErikA
    We're building a medical image processing software stack, currently hosted on various AWS resources. As part of this application, we have a handful of long-running servers (database, load balancers, web application, etc.). Collecting performance data on those servers is quite simple - my go-to- recipe of Nagios (for monitoring/notifications) and Munin (for collection of performance data and displaying trends) will work just fine. However - as part of this application, we are constantly starting up and terminating compute instances on EC2. In typical usage, these compute instances start up, configure themselves, receive a job from a message queue, and then get to work processing that job, which takes anywhere from 15 minutes to over 8 hours. After job completion, these instances get terminated, never to be heard from again. What is a decent strategy for collecting performance data on these short-lived instances? I don't necessarily need monitoring on them - if they fail for whatever reason, our application will detect this and handle re-starting the job on another instance or raising the flag so an administrator can take a look at things. However, it still would be useful to collect information like CPU (user, idle, iowait, etc.), memory usage, network traffic, disk read/write data, etc. In our internal database, we track the instance ID of the machine that runs each job, and it would be quite helpful to be able to look up performance data for a specific instance ID for troubleshooting and profiling. Munin doesn't seem like a great candidate, as it requires maintaining a list of munin nodes in a text file - far from ideal for an environment with a high amount of churn, and for the short amount of time each node will be running, I'd rather keep the full-resolution data indefinitely than have RRD water down the data over time. In the end, my guess is that this will require a monitoring engine that: uses a database (MySQL, SQLite, etc.) for configuration and data storage exposes an API for adding/removing hosts and services Are there other things I should be thinking about when evaluating options? Perhaps I'm over-thinking this, though, and just ought to run sar at 1-minute intervals on these short-lived instances and collect the sar db files prior to termination.

    Read the article

  • Distributed storage and computing

    - by Tim van Elteren
    Dear Serverfault community, After researching a number of distributed file systems for deployment in a production environment with the main purpose of performing both batch and real-time distributed computing I've identified the following list as potential candidates, mainly on maturity, license and support: Ceph Lustre GlusterFS HDFS FhGFS MooseFS XtreemFS The key properties that our system should exhibit: an open source, liberally licensed, yet production ready, e.g. a mature, reliable, community and commercially supported solution; ability to run on commodity hardware, preferably be designed for it; provide high availability of the data with the most focus on reads; high scalability, so operation over multiple data centres, possibly on a global scale; removal of single points of failure with the use of replication and distribution of (meta-)data, e.g. provide fault-tolerance. The sensitivity points that were identified, and resulted in the following questions, are: transparency to the processing layer / application with respect to data locality, e.g. know where data is physically located on a server level, mainly for resource allocation and fast processing, high performance, how can this be accomplished? Do you from experience know what solutions provide this transparency and to what extent? posix compliance, or conformance, is mentioned on the wiki pages of most of the above listed solutions. The question here mainly is, how relevant is support for the posix standard? Hadoop for example isn't posix compliant by design, what are the pro's and con's? what about the difference between synchronous and asynchronous opeartion of a distributed file system. Though a synchronous distributed file system has the preference because of reliability it also imposes certain limitations with respect to scalability. What would be, from your expertise, the way to go on this? I'm looking forward to your replies. Thanks in advance! :) With kind regards, Tim van Elteren

    Read the article

  • Problem with ubuntu 10.10 running from USB drive

    - by Surjya Narayana Padhi
    I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

    Read the article

  • Problem with ubuntu 10.10 running from USB drive

    - by Surjya Narayana Padhi
    Hi Geeks, I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

    Read the article

  • How do I get a network printer installed in ubuntu 9.04?

    - by SoaperGEM
    My girlfriend's work computer now has Linux on one of the partitions, and for the most part it's running fine--except that I can't seem to get the network printers configured right. There are two of them: a Lanier MP 7500/LD275 and a Lanier MP C3000/LD430c, and Linux seems to have found them both automatically. I'll go through the steps of what I did, and what exactly went wrong. I went to Administration Printing, and clicked the new printer button. It searched for printers and found them both, listed under "Network Printers." I added them as new printers in succession. However, when I clicked "Print a Test Page," it failed saying there was a broken pipe. The device URIs were saved as socket://[ip address]:9100. I changed these to lpd://[ip address] per some online tutorial, which at first looked like it might have worked (but didn't). Then when I tried to print a test page, it first said Processing (and sometimes even Processing - printing test page, 4%, but always subsequently displays Idle - /usr/lib/cups/backend/lpd failed. Help! What do I do? It seems like Linux can find these printers just fine, and the drivers seem to be in place, so what's going wrong?

    Read the article

  • processes slow after some time of actively running

    - by Yervand Aghababyan
    i have several cron jobs running on an ubuntu machine. each one does some pretty heavy load stuff. The cron jobs are parsing files and the bigger the file the longer it takes them to parse it. The strange thing is that if i make the files too big ( like 30mb) the script kind of hangs. It starts processing them really enthusiastically but after some time (something like 5-10 minutes) the cpu usage of the process drops a lot and it gets into some "zombie" state. If prior to this the process in htop was using 70-80% of the CPU then after this drop occurs it slows down to something like 5-10%. the load average drops down as well. The status of the processes sometimes changes to D in htop, which AFAIR stands for zombie. Today i noticed the same behavior of processes of mysql when executing heavy queries (a query took something like 4 hours to execute). the cron jobs are mostly php and during their processing most of the CPU eats the php process and not mysql. so i think the issue is not with a specific language/program but with the way the processes are "managed". The only other place i've seen similar behavior was on my Amazon EC2 micro instance when after some aggressive use of CPU the CPU quota was taking effect and everything was slowing down dramatically. This is a dedicated machine running ubuntu. what may be the cause?

    Read the article

  • when to upgrade server to include more cores, versus more processors, versus additional server?

    - by gkdsp
    The server hosting market is separated into single, double, qual, etc., processors, where each processor has several cores, or CPUs. My company will offer a Linux-based web application that relies on an Apache web server and a middle tier for business logic. The middle tier is used to crunch math, and return result to a client. Many clients may access the application simultaneously. The company will start with one processor having 4 cores. I'm trying to understand how the app uses the cores and then how to scale the application as business grows, in terms of servers/processors/cores. For example, I'd assume initially one core would be used for Apache, and the other 3 used to process client's requests for math crunching... Question 1: does that mean, with the 3 cores available, I can handle 3 separate client requests simultaneously (e.g. 1 for each of 3 cores)? I mean, except for the shared RAM, is this effectively like having 3 individual machines (from pt of view or processing client requests simulaneously)? Or, only one client's request may be processed at any one time, but that client's request is divided up into up to 3 cores depending on the type of process running that does the math crunching and whether or not it can take advantage of multi threading (so the # of cores impacts how fast any one client request completes)? I'm confused about what the cores mean to the application here. Question 2: As the business grows and more client requests need to be processed, should the server be upgraded to (A) a new machine with more cores, (B) a new machine with two processors, 4 cores each, or (C) keep the original server and add another server with a single processor? Which route provides the most efficient way to scale the application, in terms of processing more client requests per time interval? Is the choice, for example, limited by RAM (when you need more RAM than box can handle it's time to add another server), or something else? Question 3: Is the total number of client requests processed simultaneously equal to the number of cores times the number of servers (minus the one core for Apache)?

    Read the article

  • Oracle 11g Data Guard over a WAN

    - by Dave LeJeune
    Hi - We are in process of looking at using Oracle's Data Guard to replicate our 11g instance from a colo facility in Washington DC to Chicago. To give some basics we have approximately 25TB of storage and a healthy transaction rate in the 1-2K/sec range. Also, because we are processing data in real-time we have a 24x7x365 requirement for processing data. We don't have any respites as far as volume except for system upgrades (once every few months) where we take the system offline but then course experience a spike in transactions when we bring the system back on-line. Ideally we would want the second instance in the DG configuration semi-online in a read-only fashion for reports/etc. We evaluated DG in 10g and were not overly impressed and research seemed to show that earlier versions had issues with replication over a WAN but I have heard good things about modifications the product has gone through w/ 11g. Can anyone confirm an instance of this size and transaction rate being replicated over a WAN and if so what is the general latency? An information or experiences with a DG implementation that is of this size and scope would really be helpful (or larger - I also realize we are still relatively small compared to many others out there). Many thanks in advance.

    Read the article

  • can't install anything anymore with apt-get

    - by Aymane Shuichi
    Welcome this is the log I have when trying to install anything (php5-fpm after removing it) apt-get install php5-fpm Reading package lists... Done Building dependency tree Reading state information... Done php5-fpm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up php5-fpm (5.4.4-14+deb7u10) ... insserv: warning: script 'S55IptabLes' missing LSB tags and overrides insserv: warning: script 'S55IptabLex' missing LSB tags and overrides insserv: There is a loop between service IptabLes and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service networking at depth 7 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: There is a loop between service rc.local and mountall if started insserv: loop involving service mountall at depth 6 insserv: loop involving service checkfs at depth 5 insserv: loop involving service kbd at depth 11 insserv: There is a loop between service rc.local and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 7 insserv: loop involving service urandom at depth 9 insserv: There is a loop between service IptabLes and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rc.local if started insserv: There is a loop at service IptabLes if started insserv: Starting IptabLes depends on rc.local and therefore on system facility `$all' which can not be true! (x99 times repeated ) insserv: Max recursions depth 99 reached insserv: loop involving service postfix at depth 2 insserv: There is a loop between service IptabLes and udev if started insserv: loop involving service mountkernfs at depth 1 insserv: loop involving service IptabLes at depth 1 Now here is the error i get insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing php5-fpm (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: php5-fpm E: Sub-process /usr/bin/dpkg returned an error code (1) The biggest operation I held before this was updating nginx from 1.2 to 1.6 and it was thanks to this site : here is the link : How to upgrade nginx from 1.2 to 1.6 on debian 7 Please help !

    Read the article

  • Can't upgrade MySQL Server on new Ubuntu 12.04 install

    - by user179627
    After freshly installing Ubuntu server 12.04, I did the usual apt-get update / apt-get upgrade, which failed for mysql-server-5.5: Setting up mysql-server-5.5 (5.5.31-0ubuntu0.12.04.2) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured I tried a wide variety a approaches suggested by googling, which involved various combinations of apt-get remove/purge/install -f/reinstall, etc., with no luck. I also tried downloading the package directly from launchpad.net and running dpkg -i on it (this had worked for a similar issue with a kernel upgrade), but to no avail. I'm not actually particularly interested in what's going on with mysql, per se (though I will need to figure it out at some time); at this point, my primary concern is that I am unable to apt-get install other packages! What to do?

    Read the article

  • Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

    - by MasterRoot24
    I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Authoritative sources about Database vs. Flatfile decision

    - by FastAl
    <tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

    Read the article

  • How do I prove I should put a table of values in source code instead of a database table?

    - by FastAl
    <tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

    Read the article

  • Java Cloud Service Integration to REST Service

    - by Jani Rautiainen
    Service (JCS) provides a platform to develop and deploy business applications in the cloud. In Fusion Applications Cloud deployments customers do not have the option to deploy custom applications developed with JDeveloper to ensure the integrity and supportability of the hosted application service. Instead the custom applications can be deployed to the JCS and integrated to the Fusion Application Cloud instance. This series of articles will go through the features of JCS, provide end-to-end examples on how to develop and deploy applications on JCS and how to integrate them with the Fusion Applications instance. In this article a custom application integrating with REST service will be implemented. We will use REST services provided by Taleo as an example; however the same approach will work with any REST service. In this example the data from the REST service is used to populate a dynamic table. Pre-requisites Access to Cloud instance In order to deploy the application access to a JCS instance is needed, a free trial JCS instance can be obtained from Oracle Cloud site. To register you will need a credit card even if the credit card will not be charged. To register simply click "Try it" and choose the "Java" option. The confirmation email will contain the connection details. See this video for example of the registration.Once the request is processed you will be assigned 2 service instances; Java and Database. Applications deployed to the JCS must use Oracle Database Cloud Service as their underlying database. So when JCS instance is created a database instance is associated with it using a JDBC data source.The cloud services can be monitored and managed through the web UI. For details refer to Getting Started with Oracle Cloud. JDeveloper JDeveloper contains Cloud specific features related to e.g. connection and deployment. To use these features download the JDeveloper from JDeveloper download site by clicking the "Download JDeveloper 11.1.1.7.1 for ADF deployment on Oracle Cloud" link, this version of JDeveloper will have the JCS integration features that will be used in this article. For versions that do not include the Cloud integration features the Oracle Java Cloud Service SDK or the JCS Java Console can be used for deployment. For details on installing and configuring the JDeveloper refer to the installation guideFor details on SDK refer to Using the Command-Line Interface to Monitor Oracle Java Cloud Service and Using the Command-Line Interface to Manage Oracle Java Cloud Service. Access to a local database The database associated with the JCS instance cannot be connected to with JDBC.  Since creating ADFbc business component requires a JDBC connection we will need access to a local database. 3rd party libraries This example will use some 3rd party libraries for implementing the REST service call and processing the input / output content. Other libraries may also be used, however these are tested to work. Jersey 1.x Jersey library will be used as a client to make the call to the REST service. JCS documentation for supported specifications states: Java API for RESTful Web Services (JAX-RS) 1.1 So Jersey 1.x will be used. Download the single-JAR Jersey bundle; in this example Jersey 1.18 JAR bundle is used. Json-simple Jjson-simple library will be used to process the json objects. Download the  JAR file; in this example json-simple-1.1.1.jar is used. Accessing data in Taleo Before implementing the application it is beneficial to familiarize oneself with the data in Taleo. Easiest way to do this is by using a RESTClient on your browser. Once added to the browser you can access the UI: The client can be used to call the REST services to test the URLs and data before adding them into the application. First derive the base URL for the service this can be done with: Method: GET URL: https://tbe.taleo.net/MANAGER/dispatcher/api/v1/serviceUrl/<company name> The response will contain the base URL to be used for the service calls for the company. Next obtain authentication token with: Method: POST URL: https://ch.tbe.taleo.net/CH07/ats/api/v1/login?orgCode=<company>&userName=<user name>&password=<password> The response includes an authentication token that can be used for few hours to authenticate with the service: {   "response": {     "authToken": "webapi26419680747505890557"   },   "status": {     "detail": {},     "success": true   } } To authenticate the service calls navigate to "Headers -> Custom Header": And add a new request header with: Name: Cookie Value: authToken=webapi26419680747505890557 Once authentication token is defined the tool can be used to invoke REST services; for example: Method: GET URL: https://ch.tbe.taleo.net/CH07/ats/api/v1/object/candidate/search.xml?status=16 This data will be used on the application to be created. For details on the Taleo REST services refer to the Taleo Business Edition REST API Guide. Create Application First Fusion Web Application is created and configured. Start JDeveloper and click "New Application": Application Name: JcsRestDemo Application Package Prefix: oracle.apps.jcs.test Application Template: Fusion Web Application (ADF) Configure Local Cloud Connection Follow the steps documented in the "Java Cloud Service ADF Web Application" article to configure a local database connection needed to create the ADFbc objects. Configure Libraries Add the 3rd party libraries into the class path. Create the following directory and copy the jar files into it: <JDEV_USER_HOME>/JcsRestDemo/lib  Select the "Model" project, navigate "Application -> Project Properties -> Libraries and Classpath -> Add JAR / Directory" and add the 2 3rd party libraries: Accessing Data from Taleo To access data from Taleo using the REST service the 3rd party libraries will be used. 2 Java classes are implemented, one representing the Candidate object and another for accessing the Taleo repository Candidate Candidate object is a POJO object used to represent the candidate data obtained from the Taleo repository. The data obtained will be used to populate the ADFbc object used to display the data on the UI. The candidate object contains simply the variables we obtain using the REST services and the getters / setters for them: Navigate "New -> General -> Java -> Java Class", enter "Candidate" as the name and create it in the package "oracle.apps.jcs.test.model".  Copy / paste the following as the content: import oracle.jbo.domain.Number; public class Candidate { private Number candId; private String firstName; private String lastName; public Candidate() { super(); } public Candidate(Number candId, String firstName, String lastName) { super(); this.candId = candId; this.firstName = firstName; this.lastName = lastName; } public void setCandId(Number candId) { this.candId = candId; } public Number getCandId() { return candId; } public void setFirstName(String firstName) { this.firstName = firstName; } public String getFirstName() { return firstName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getLastName() { return lastName; } } Taleo Repository Taleo repository class will interact with the Taleo REST services. The logic will query data from Taleo and populate Candidate objects with the data. The Candidate object will then be used to populate the ADFbc object used to display data on the UI. Navigate "New -> General -> Java -> Java Class", enter "TaleoRepository" as the name and create it in the package "oracle.apps.jcs.test.model".  Copy / paste the following as the content (for details of the implementation refer to the documentation in the code): import com.sun.jersey.api.client.Client; import com.sun.jersey.api.client.ClientResponse; import com.sun.jersey.api.client.WebResource; import com.sun.jersey.core.util.MultivaluedMapImpl; import java.io.StringReader; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import java.util.Map; import javax.ws.rs.core.MediaType; import javax.ws.rs.core.MultivaluedMap; import oracle.jbo.domain.Number; import org.json.simple.JSONArray; import org.json.simple.JSONObject; import org.json.simple.parser.JSONParser; /** * This class interacts with the Taleo REST services */ public class TaleoRepository { /** * Connection information needed to access the Taleo services */ String _company = null; String _userName = null; String _password = null; /** * Jersey client used to access the REST services */ Client _client = null; /** * Parser for processing the JSON objects used as * input / output for the services */ JSONParser _parser = null; /** * The base url for constructing the REST URLs. This is obtained * from Taleo with a service call */ String _baseUrl = null; /** * Authentication token obtained from Taleo using a service call. * The token can be used to authenticate on subsequent * service calls. The token will expire in 4 hours */ String _authToken = null; /** * Static url that can be used to obtain the url used to construct * service calls for a given company */ private static String _taleoUrl = "https://tbe.taleo.net/MANAGER/dispatcher/api/v1/serviceUrl/"; /** * Default constructor for the repository * Authentication details are passed as parameters and used to generate * authentication token. Note that each service call will * generate its own token. This is done to avoid dealing with the expiry * of the token. Also only 20 tokens are allowed per user simultaneously. * So instead for each call there is login / logout. * * @param company the company for which the service calls are made * @param userName the user name to authenticate with * @param password the password to authenticate with. */ public TaleoRepository(String company, String userName, String password) { super(); _company = company; _userName = userName; _password = password; _client = Client.create(); _parser = new JSONParser(); _baseUrl = getBaseUrl(); } /** * This obtains the base url for a company to be used * to construct the urls for service calls * @return base url for the service calls */ private String getBaseUrl() { String result = null; if (null != _baseUrl) { result = _baseUrl; } else { try { String company = _company; WebResource resource = _client.resource(_taleoUrl + company); ClientResponse response = resource.type(MediaType.APPLICATION_FORM_URLENCODED_TYPE).get(ClientResponse.class); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); JSONObject jsonResponse = (JSONObject)jsonObject.get("response"); result = (String)jsonResponse.get("URL"); } catch (Exception ex) { ex.printStackTrace(); } } return result; } /** * Generates authentication token, that can be used to authenticate on * subsequent service calls. Note that each service call will * generate its own token. This is done to avoid dealing with the expiry * of the token. Also only 20 tokens are allowed per user simultaneously. * So instead for each call there is login / logout. * @return authentication token that can be used to authenticate on * subsequent service calls */ private String login() { String result = null; try { MultivaluedMap<String, String> formData = new MultivaluedMapImpl(); formData.add("orgCode", _company); formData.add("userName", _userName); formData.add("password", _password); WebResource resource = _client.resource(_baseUrl + "login"); ClientResponse response = resource.type(MediaType.APPLICATION_FORM_URLENCODED_TYPE).post(ClientResponse.class, formData); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); JSONObject jsonResponse = (JSONObject)jsonObject.get("response"); result = (String)jsonResponse.get("authToken"); } catch (Exception ex) { throw new RuntimeException("Unable to login ", ex); } if (null == result) throw new RuntimeException("Unable to login "); return result; } /** * Releases a authentication token. Each call to login must be followed * by call to logout after the processing is done. This is required as * the tokens are limited to 20 per user and if not released the tokens * will only expire after 4 hours. * @param authToken */ private void logout(String authToken) { WebResource resource = _client.resource(_baseUrl + "logout"); resource.header("cookie", "authToken=" + authToken).post(ClientResponse.class); } /** * This method is used to obtain a list of candidates using a REST * service call. At this example the query is hard coded to query * based on status. The url constructed to access the service is: * <_baseUrl>/object/candidate/search.xml?status=16 * @return List of candidates obtained with the service call */ public List<Candidate> getCandidates() { List<Candidate> result = new ArrayList<Candidate>(); try { // First login, note that in finally block we must have logout _authToken = "authToken=" + login(); /** * Construct the URL, the resulting url will be: * <_baseUrl>/object/candidate/search.xml?status=16 */ MultivaluedMap<String, String> formData = new MultivaluedMapImpl(); formData.add("status", "16"); JSONArray searchResults = (JSONArray)getTaleoResource("object/candidate/search", "searchResults", formData); /** * Process the results, the resulting JSON object is something like * this (simplified for readability): * * { * "response": * { * "searchResults": * [ * { * "candidate": * { * "candId": 211, * "firstName": "Mary", * "lastName": "Stochi", * logic here will find the candidate object(s), obtain the desired * data from them, construct a Candidate object based on the data * and add it to the results. */ for (Object object : searchResults) { JSONObject temp = (JSONObject)object; JSONObject candidate = (JSONObject)findObject(temp, "candidate"); Long candIdTemp = (Long)candidate.get("candId"); Number candId = (null == candIdTemp ? null : new Number(candIdTemp)); String firstName = (String)candidate.get("firstName"); String lastName = (String)candidate.get("lastName"); result.add(new Candidate(candId, firstName, lastName)); } } catch (Exception ex) { ex.printStackTrace(); } finally { if (null != _authToken) logout(_authToken); } return result; } /** * Convenience method to construct url for the service call, invoke the * service and obtain a resource from the response * @param path the path for the service to be invoked. This is combined * with the base url to construct a url for the service * @param resource the key for the object in the response that will be * obtained * @param parameters any parameters used for the service call. The call * is slightly different depending whether parameters exist or not. * @return the resource from the response for the service call */ private Object getTaleoResource(String path, String resource, MultivaluedMap<String, String> parameters) { Object result = null; try { WebResource webResource = _client.resource(_baseUrl + path); ClientResponse response = null; if (null == parameters) response = webResource.header("cookie", _authToken).get(ClientResponse.class); else response = webResource.queryParams(parameters).header("cookie", _authToken).get(ClientResponse.class); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); result = findObject(jsonObject, resource); } catch (Exception ex) { ex.printStackTrace(); } return result; } /** * Convenience method to recursively find a object with an key * traversing down from a given root object. This will traverse a * JSONObject / JSONArray recursively to find a matching key, if found * the object with the key is returned. * @param root root object which contains the key searched for * @param key the key for the object to search for * @return the object matching the key */ private Object findObject(Object root, String key) { Object result = null; if (root instanceof JSONObject) { JSONObject rootJSON = (JSONObject)root; if (rootJSON.containsKey(key)) { result = rootJSON.get(key); } else { Iterator children = rootJSON.entrySet().iterator(); while (children.hasNext()) { Map.Entry entry = (Map.Entry)children.next(); Object child = entry.getValue(); if (child instanceof JSONObject || child instanceof JSONArray) { result = findObject(child, key); if (null != result) break; } } } } else if (root instanceof JSONArray) { JSONArray rootJSON = (JSONArray)root; for (Object child : rootJSON) { if (child instanceof JSONObject || child instanceof JSONArray) { result = findObject(child, key); if (null != result) break; } } } return result; } }   Creating Business Objects While JCS application can be created without a local database, the local database is required when using ADFbc objects even if database objects are not referred. For this example we will create a "Transient" view object that will be programmatically populated based the data obtained from Taleo REST services. Creating ADFbc objects Choose the "Model" project and navigate "New -> Business Tier : ADF Business Components : View Object". On the "Initialize Business Components Project" choose the local database connection created in previous step. On Step 1 enter "JcsRestDemoVO" on the "Name" and choose "Rows populated programmatically, not based on query": On step 2 create the following attributes: CandId Type: Number Updatable: Always Key Attribute: checked Name Type: String Updatable: Always On steps 3 and 4 accept defaults and click "Next".  On step 5 check the "Application Module" checkbox and enter "JcsRestDemoAM" as the name: Click "Finish" to generate the objects. Populating the VO To display the data on the UI the "transient VO" is populated programmatically based on the data obtained from the Taleo REST services. Open the "JcsRestDemoVOImpl.java". Copy / paste the following as the content (for details of the implementation refer to the documentation in the code): import java.sql.ResultSet; import java.util.List; import java.util.ListIterator; import oracle.jbo.server.ViewObjectImpl; import oracle.jbo.server.ViewRowImpl; import oracle.jbo.server.ViewRowSetImpl; // --------------------------------------------------------------------- // --- File generated by Oracle ADF Business Components Design Time. // --- Tue Feb 18 09:40:25 PST 2014 // --- Custom code may be added to this class. // --- Warning: Do not modify method signatures of generated methods. // --------------------------------------------------------------------- public class JcsRestDemoVOImpl extends ViewObjectImpl { /** * This is the default constructor (do not remove). */ public JcsRestDemoVOImpl() { } @Override public void executeQuery() { /** * For some reason we need to reset everything, otherwise * 2nd entry to the UI screen may fail with * "java.util.NoSuchElementException" in createRowFromResultSet * call to "candidates.next()". I am not sure why this is happening * as the Iterator is new and "hasNext" is true at the point * of the execution. My theory is that since the iterator object is * exactly the same the VO cache somehow reuses the iterator including * the pointer that has already exhausted the iterable elements on the * previous run. Working around the issue * here by cleaning out everything on the VO every time before query * is executed on the VO. */ getViewDef().setQuery(null); getViewDef().setSelectClause(null); setQuery(null); this.reset(); this.clearCache(); super.executeQuery(); } /** * executeQueryForCollection - overridden for custom java data source support. */ protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams) { /** * Integrate with the Taleo REST services using TaleoRepository class. * A list of candidates matching a hard coded query is obtained. */ TaleoRepository repository = new TaleoRepository(<company>, <username>, <password>); List<Candidate> candidates = repository.getCandidates(); /** * Store iterator for the candidates as user data on the collection. * This will be used in createRowFromResultSet to create rows based on * the custom iterator. */ ListIterator<Candidate> candidatescIterator = candidates.listIterator(); setUserDataForCollection(qc, candidatescIterator); super.executeQueryForCollection(qc, params, noUserParams); } /** * hasNextForCollection - overridden for custom java data source support. */ protected boolean hasNextForCollection(Object qc) { boolean result = false; /** * Determines whether there are candidates for which to create a row */ ListIterator<Candidate> candidates = (ListIterator<Candidate>)getUserDataForCollection(qc); result = candidates.hasNext(); /** * If all candidates to be created indicate that processing is done */ if (!result) { setFetchCompleteForCollection(qc, true); } return result; } /** * createRowFromResultSet - overridden for custom java data source support. */ protected ViewRowImpl createRowFromResultSet(Object qc, ResultSet resultSet) { /** * Obtain the next candidate from the collection and create a row * for it. */ ListIterator<Candidate> candidates = (ListIterator<Candidate>)getUserDataForCollection(qc); ViewRowImpl row = createNewRowForCollection(qc); try { Candidate candidate = candidates.next(); row.setAttribute("CandId", candidate.getCandId()); row.setAttribute("Name", candidate.getFirstName() + " " + candidate.getLastName()); } catch (Exception e) { e.printStackTrace(); } return row; } /** * getQueryHitCount - overridden for custom java data source support. */ public long getQueryHitCount(ViewRowSetImpl viewRowSet) { /** * For this example this is not implemented rather we always return 0. */ return 0; } } Creating UI Choose the "ViewController" project and navigate "New -> Web Tier : JSF : JSF Page". On the "Create JSF Page" enter "JcsRestDemo" as name and ensure that the "Create as XML document (*.jspx)" is checked.  Open "JcsRestDemo.jspx" and navigate to "Data Controls -> JcsRestDemoAMDataControl -> JcsRestDemoVO1" and drag & drop the VO to the "<af:form> " as a "ADF Read-only Table": Accept the defaults in "Edit Table Columns". To execute the query navigate to to "Data Controls -> JcsRestDemoAMDataControl -> JcsRestDemoVO1 -> Operations -> Execute" and drag & drop the operation to the "<af:form> " as a "Button": Deploying to JCS Follow the same steps as documented in previous article"Java Cloud Service ADF Web Application". Once deployed the application can be accessed with URL: https://java-[identity domain].java.[data center].oraclecloudapps.com/JcsRestDemo-ViewController-context-root/faces/JcsRestDemo.jspx The UI displays a list of candidates obtained from the Taleo REST Services: Summary In this article we learned how to integrate with REST services using Jersey library in JCS. In future articles various other integration techniques will be covered.

    Read the article

  • Resque Runtime Error at /workers: wrong number of arguments for 'exists' command

    - by Superflux
    I'm having a runtime errror when i'm looking at the "workers" tab on resque-web (localhost). Everything else works. Edit: when this error occurs, i also have some (3 or 4) unknown workers 'not working'. I think they are responsible for the error but i don't understand how they got here Can you help me on this ? Did i do something wrong ? Config: Resque 1.8.5 as a gem in a rails 2.3.8 app on Snow Leopard redis 1.0.7 / rack 1.1 / sinatra 1.0 / vegas 0.1.7 file: client.rb location: format_error_reply line: 558 BACKTRACE: * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in format_error_reply * 551. when DOLLAR then format_bulk_reply(line) 552. when ASTERISK then format_multi_bulk_reply(line) 553. else raise ProtocolError.new(reply_type) 554. end 555. end 556. 557. def format_error_reply(line) 558. raise "-" + line.strip 559. end 560. 561. def format_status_reply(line) 562. line.strip 563. end 564. 565. def format_integer_reply(line) * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in format_reply * 541. 542. def reconnect 543. disconnect && connect_to_server 544. end 545. 546. def format_reply(reply_type, line) 547. case reply_type 548. when MINUS then format_error_reply(line) 549. when PLUS then format_status_reply(line) 550. when COLON then format_integer_reply(line) 551. when DOLLAR then format_bulk_reply(line) 552. when ASTERISK then format_multi_bulk_reply(line) 553. else raise ProtocolError.new(reply_type) 554. end 555. end * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in read_reply * 478. disconnect 479. 480. raise Errno::EAGAIN, "Timeout reading from the socket" 481. end 482. 483. raise Errno::ECONNRESET, "Connection lost" unless reply_type 484. 485. format_reply(reply_type, @sock.gets) 486. end 487. 488. 489. if "".respond_to?(:bytesize) 490. def get_size(string) 491. string.bytesize 492. end * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in process_command * 448. return pipeline ? results : results[0] 449. end 450. 451. def process_command(command, argvv) 452. @sock.write(command) 453. argvv.map do |argv| 454. processor = REPLY_PROCESSOR[argv[0].to_s] 455. processor ? processor.call(read_reply) : read_reply 456. end 457. end 458. 459. def maybe_lock(&block) 460. if @thread_safe 461. @mutex.synchronize(&block) 462. else * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in map * 446. end 447. 448. return pipeline ? results : results[0] 449. end 450. 451. def process_command(command, argvv) 452. @sock.write(command) 453. argvv.map do |argv| 454. processor = REPLY_PROCESSOR[argv[0].to_s] 455. processor ? processor.call(read_reply) : read_reply 456. end 457. end 458. 459. def maybe_lock(&block) 460. if @thread_safe * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in process_command * 446. end 447. 448. return pipeline ? results : results[0] 449. end 450. 451. def process_command(command, argvv) 452. @sock.write(command) 453. argvv.map do |argv| 454. processor = REPLY_PROCESSOR[argv[0].to_s] 455. processor ? processor.call(read_reply) : read_reply 456. end 457. end 458. 459. def maybe_lock(&block) 460. if @thread_safe * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in raw_call_command * 435. @sock.write(command) 436. return true 437. end 438. # The normal command execution is reading and processing the reply. 439. results = maybe_lock do 440. begin 441. set_socket_timeout!(0) if requires_timeout_reset?(argvv[0][0].to_s) 442. process_command(command, argvv) 443. ensure 444. set_socket_timeout!(@timeout) if requires_timeout_reset?(argvv[0][0].to_s) 445. end 446. end 447. 448. return pipeline ? results : results[0] 449. end * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in synchronize * 454. processor = REPLY_PROCESSOR[argv[0].to_s] 455. processor ? processor.call(read_reply) : read_reply 456. end 457. end 458. 459. def maybe_lock(&block) 460. if @thread_safe 461. @mutex.synchronize(&block) 462. else 463. block.call 464. end 465. end 466. 467. def read_reply 468. * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in maybe_lock * 454. processor = REPLY_PROCESSOR[argv[0].to_s] 455. processor ? processor.call(read_reply) : read_reply 456. end 457. end 458. 459. def maybe_lock(&block) 460. if @thread_safe 461. @mutex.synchronize(&block) 462. else 463. block.call 464. end 465. end 466. 467. def read_reply 468. * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in raw_call_command * 432. end 433. # When in Pub/Sub mode we don't read replies synchronously. 434. if @pubsub 435. @sock.write(command) 436. return true 437. end 438. # The normal command execution is reading and processing the reply. 439. results = maybe_lock do 440. begin 441. set_socket_timeout!(0) if requires_timeout_reset?(argvv[0][0].to_s) 442. process_command(command, argvv) 443. ensure 444. set_socket_timeout!(@timeout) if requires_timeout_reset?(argvv[0][0].to_s) 445. end 446. end * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in call_command * 336. # try to reconnect just one time, otherwise let the error araise. 337. def call_command(argv) 338. log(argv.inspect, :debug) 339. 340. connect_to_server unless connected? 341. 342. begin 343. raw_call_command(argv.dup) 344. rescue Errno::ECONNRESET, Errno::EPIPE, Errno::ECONNABORTED 345. if reconnect 346. raw_call_command(argv.dup) 347. else 348. raise Errno::ECONNRESET 349. end 350. end * /Library/Ruby/Gems/1.8/gems/redis-1.0.7/lib/redis/client.rb in method_missing * 385. connect_to(@host, @port) 386. call_command([:auth, @password]) if @password 387. call_command([:select, @db]) if @db != 0 388. @sock 389. end 390. 391. def method_missing(*argv) 392. call_command(argv) 393. end 394. 395. def raw_call_command(argvp) 396. if argvp[0].is_a?(Array) 397. argvv = argvp 398. pipeline = true 399. else * /Library/Ruby/Gems/1.8/gems/redis-namespace-0.4.4/lib/redis/namespace.rb in send * 159. args = add_namespace(args) 160. args.push(last) if last 161. when :alternate 162. args = [ add_namespace(Hash[*args]) ] 163. end 164. 165. # Dispatch the command to Redis and store the result. 166. result = @redis.send(command, *args, &block) 167. 168. # Remove the namespace from results that are keys. 169. result = rem_namespace(result) if after == :all 170. 171. result 172. end 173. * /Library/Ruby/Gems/1.8/gems/redis-namespace-0.4.4/lib/redis/namespace.rb in method_missing * 159. args = add_namespace(args) 160. args.push(last) if last 161. when :alternate 162. args = [ add_namespace(Hash[*args]) ] 163. end 164. 165. # Dispatch the command to Redis and store the result. 166. result = @redis.send(command, *args, &block) 167. 168. # Remove the namespace from results that are keys. 169. result = rem_namespace(result) if after == :all 170. 171. result 172. end 173. * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/lib/resque/worker.rb in state * 416. def idle? 417. state == :idle 418. end 419. 420. # Returns a symbol representing the current worker state, 421. # which can be either :working or :idle 422. def state 423. redis.exists("worker:#{self}") ? :working : :idle 424. end 425. 426. # Is this worker the same as another worker? 427. def ==(other) 428. to_s == other.to_s 429. end 430. * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/lib/resque/server/views/workers.erb in __tilt_a2112543c5200dbe0635da5124b47311 * 46. <tr> 47. <th>&nbsp;</th> 48. <th>Where</th> 49. <th>Queues</th> 50. <th>Processing</th> 51. </tr> 52. <% for worker in (workers = resque.workers.sort_by { |w| w.to_s }) %> 53. <tr class="<%=state = worker.state%>"> 54. <td class='icon'><img src="<%=u state %>.png" alt="<%= state %>" title="<%= state %>"></td> 55. 56. <% host, pid, queues = worker.to_s.split(':') %> 57. <td class='where'><a href="<%=u "workers/#{worker}"%>"><%= host %>:<%= pid %></a></td> 58. <td class='queues'><%= queues.split(',').map { |q| '<a class="queue-tag" href="' + u("/queues/#{q}") + '">' + q + '</a>'}.join('') %></td> 59. 60. <td class='process'> * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/lib/resque/server/views/workers.erb in each * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/lib/resque/server/views/workers.erb in __tilt_a2112543c5200dbe0635da5124b47311 * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/tilt.rb in send * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/tilt.rb in evaluate * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/tilt.rb in render * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in render * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in erb * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/lib/resque/server.rb in show * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/lib/resque/server.rb in GET /workers * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in call * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in route * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in instance_eval * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in route_eval * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in route! * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in catch * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in route! * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in each * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in route! * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in dispatch! * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in call! * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in instance_eval * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in invoke * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in catch * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in invoke * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in call! * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in call * /Volumes/Donnees/Users/**/.gem/ruby/1.8/gems/rack-1.1.0/lib/rack/showexceptions.rb in call * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in call * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in synchronize * /Library/Ruby/Gems/1.8/gems/sinatra-1.0/lib/sinatra/base.rb in call * /Volumes/Donnees/Users/**/.gem/ruby/1.8/gems/rack-1.1.0/lib/rack/content_length.rb in call * /Volumes/Donnees/Users/**/.gem/ruby/1.8/gems/rack-1.1.0/lib/rack/chunked.rb in call * /Volumes/Donnees/Users/**/.gem/ruby/1.8/gems/rack-1.1.0/lib/rack/handler/mongrel.rb in process * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in process_client * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in each * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in process_client * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in run * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in initialize * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in new * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in run * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in initialize * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in new * /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb in run * /Volumes/Donnees/Users/**/.gem/ruby/1.8/gems/rack-1.1.0/lib/rack/handler/mongrel.rb in run * /Library/Ruby/Gems/1.8/gems/vegas-0.1.7/lib/vegas/runner.rb in run! * /Library/Ruby/Gems/1.8/gems/vegas-0.1.7/lib/vegas/runner.rb in start * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/bin/resque-web in new * /Library/Ruby/Gems/1.8/gems/resque-1.8.5/bin/resque-web in nil * /usr/bin/resque-web in load

    Read the article

  • Salesforce/PHP - Bulk Outbound message (SOAP), Time out issue - See update #2

    - by Phill Pafford
    Salesforce can send up to 100 requests inside 1 SOAP message. While sending this type of Bulk Ooutbound message request my PHP script finishes executing but SF fails to accept the ACK used to clear the message queue on the Salesforce side of things. Looking at the Outbound message log (monitoring) I see all the messages in a pending state with the Delivery Failure Reason "java.net.SocketTimeoutException: Read timed out". If my script has finished execution, why do I get this error? I have tried these methods to increase the execution time on my server as I have no access on the Salesforce side: set_time_limit(0); // in the script max_execution_time = 360 ; Maximum execution time of each script, in seconds max_input_time = 360 ; Maximum amount of time each script may spend parsing request data memory_limit = 32M ; Maximum amount of memory a script may consume I used the high settings just for testing. Any thoughts as to why this is failing the ACK delivery back to Salesforce? Here is some of the code: This is how I accept and send the ACK file for the imcoming SOAP request $data = 'php://input'; $content = file_get_contents($data); if($content) { respond('true'); } else { respond('false'); } The respond function function respond($tf) { $ACK = <<<ACK <?xml version = "1.0" encoding = "utf-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <soapenv:Body> <notifications xmlns="http://soap.sforce.com/2005/09/outbound"> <Ack>$tf</Ack> </notifications> </soapenv:Body> </soapenv:Envelope> ACK; print trim($ACK); } These are in a generic script that I include into the script that uses the data for a specific workflow. I can process about 25 requests (That are in 1 SOAP response) but once I go over that I get the timeout error in the Salesforce queue. for 50 requests is usually takes my PHP script 86.77 seconds. Could it be Apache? PHP? I have also tested just accepting the 100 request SOAP response and just accepting and sending the ACK the queue clears out, so I know it's on my side of things. I show no errors in the apache log, the script runs fine. I did find some info on the Salesforce site but still no luck. Here is the link. Also I'm using the PHP Toolkit 11 (From Salesforce). Other forum with good SF help Thanks for any insight into this, --Phill UPDATE: If I receive the incoming message and print the response, should this happen first regardless if I do anything else after? Or does it wait for my process to finish and then print the response? UPDATE #2: okay I think I have the problem: PHP uses the single thread processing approach and will not send back the ACK file until the thread has completed it's processing. Is there a way to make this a mutli thread process? Thread #1 - accept the incoming SOAP request and send back the ACK Thread #2 - Process the SOAP request I know I could break it up into like a DB table or flat file, but is there a way to accomplish this without doing that? I'm going to try to close the socket after the ACK submission and continue the processing, cross my fingers it will work.

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >