Search Results

Search found 17984 results on 720 pages for 'log shipping'.

Page 110/720 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Restrict SSL access for some paths on a apache2 server

  - by valmar

  I wanted to allow access to www.mydomain.com/login through ssl only. E.g.: Whenever someone accessed http://www.mydomain.com/login, I wanted him to be redirect to https://www.mydomain.com/login so it's impossible for him/her to access that site without SSL. I accomplished this by adding the following lines to the virtual host for www.mydomain.com on port 80 in /etc/apache2/sites-available/default: RewriteEngine on RewriteCond %{SERVER_PORT} ^80$ RewriteRule ^/login(.*)$ https://%{SERVER_NAME}/login$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" Now, I want to restrict using SSL for www.mydomain.com. That means, whenever someone accessed https://www.mydomain.com, I want him to be redirected to http://www.mydomain.com (for performance reasons). I tried this by adding the following lines to the virtual host of www.mydomain.com on port 443 in /etc/apache2/sites-available/default-ssl: RewriteEngine on RewriteCond %{SERVER_PORT} ^443$ RewriteRule ^/(.*)$ http://%{SERVER_NAME}/$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" But when I now try to access www.mydomain.com/login, I get an error message that the server has caused to many redirects. That does make sense. Obviously, the two RewriteRules are playing ping-pong against each other. How could I work around this?

  Read the article

• SSSD Authentication

  - by user24089

  I just built a test server running OpenSuSE 12.1 and am trying to learn how configure sssd, but am not sure where to begin to look for why my config cannot allow me to authenticate. server:/etc/sssd # cat sssd.conf [sssd] config_file_version = 2 reconnection_retries = 3 sbus_timeout = 30 services = nss,pam domains = test.local [nss] filter_groups = root filter_users = root reconnection_retries = 3 [pam] reconnection_retries = 3 # Section created by YaST [domain/mose.cc] access_provider = ldap ldap_uri = ldap://server.test.local ldap_search_base = dc=test,dc=local ldap_schema = rfc2307bis id_provider = ldap ldap_user_uuid = entryuuid ldap_group_uuid = entryuuid ldap_id_use_start_tls = True enumerate = False cache_credentials = True chpass_provider = krb5 auth_provider = krb5 krb5_realm = TEST.LOCAL krb5_kdcip = server.test.local server:/etc # cat ldap.conf base dc=test,dc=local bind_policy soft pam_lookup_policy yes pam_password exop nss_initgroups_ignoreusers root,ldap nss_schema rfc2307bis nss_map_attribute uniqueMember member ssl start_tls uri ldap://server.test.local ldap_version 3 pam_filter objectClass=posixAccount server:/etc # cat nsswitch.conf passwd: compat sss group: files sss hosts: files dns networks: files dns services: files protocols: files rpc: files ethers: files netmasks: files netgroup: files publickey: files bootparams: files automount: files ldap aliases: files shadow: compat server:/etc # cat krb5.conf [libdefaults] default_realm = TEST.LOCAL clockskew = 300 [realms] TEST.LOCAL = { kdc = server.test.local admin_server = server.test.local database_module = ldap default_domain = test.local } [logging] kdc = FILE:/var/log/krb5/krb5kdc.log admin_server = FILE:/var/log/krb5/kadmind.log default = SYSLOG:NOTICE:DAEMON [dbmodules] ldap = { db_library = kldap ldap_kerberos_container_dn = cn=krbContainer,dc=test,dc=local ldap_kdc_dn = cn=Administrator,dc=test,dc=local ldap_kadmind_dn = cn=Administrator,dc=test,dc=local ldap_service_password_file = /etc/openldap/ldap-pw ldap_servers = ldaps://server.test.local } [domain_realm] .test.local = TEST.LOCAL [appdefaults] pam = { ticket_lifetime = 1d renew_lifetime = 1d forwardable = true proxiable = false minimum_uid = 1 clockskew = 300 external = sshd use_shmem = sshd } If I log onto the server as root I can su into an ldap user, however if I try to console locally or ssh remotely I am unable to authenticate. getent doesn't show the ldap entries for users, Im not sure if I need to look at LDAP, nsswitch, or what: server:~ # ssh localhost -l test Password: Password: Password: Permission denied (publickey,keyboard-interactive). server:~ # su test test@server:/etc> id uid=1000(test) gid=100(users) groups=100(users) server:~ # tail /var/log/messages Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): system info: [Client not found in Kerberos database] Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/ttyS1 ruser= rhost= user=test Nov 24 09:36:44 server login[14508]: pam_sss(login:auth): received for user test: 4 (System error) Nov 24 09:36:44 server login[14508]: FAILED LOGIN SESSION FROM /dev/ttyS1 FOR test, System error server:~ # vi /etc/pam.d/common-auth auth required pam_env.so auth sufficient pam_unix2.so auth required pam_sss.so use_first_pass server:~ # vi /etc/pam.d/sshd auth requisite pam_nologin.so auth include common-auth account requisite pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session session optional pam_lastlog.so silent noupdate showfailed

  Read the article

• VMware Virtual Infrastructure Web Access not starting on Fedora 14

  - by FusionHammer

  I am running a Fedora 14 server with VMware Server 2. When I initially installed VMware Server, everything was working fine. This included accessing Web Access on port 8333 (https) and 8222 (http). I had to perform a server restart and afterwards, the Web Access is not starting when I run: /etc/init.d/vmware-mgmt start The VMware Server Host Agent starts [OK], but the Web Access has no [OK] or [Failed] next to it. I also checked ports 8333 and 8222 by running a netstat, but neither are showing up. In addition, I checked the proxy.log and client.log files in the following directory: /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs/ The proxy.log doesn't have entries in it past 9-18-2012, which is the date the server restart occurred. The client.log is empty. I not sure what is causing this issue or what log files will be helpful in narrowing down the cause. I could re-install VMware Server, but I would like to narrow down the cause as it could occur again with the new re-installed environment.

  Read the article

• Why the huge difference between etch and lenny MySQL

  - by rmarimon

  I've been working on a program for the last year. The development environment is working with a database in MySQL running on debian etch version mysql Ver 14.12 Distrib 5.0.32, for pc-linux-gnu (i486) using readline 5.2. The production environment is working on debian lenny with version mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using readline 5.2. I was just timing some database access and what takes in the development environment 150 seconds, takes 300 in the production environment. I checked the /etc/mysql/my.cnf files on both systems and the only differences are # development bind-address = 10.168.1.82 log_bin = /var/log/mysql/mysql-bin.log # production bind-address = 127.0.0.1 myisam-recover = BACKUP #log_bin = /var/log/mysql/mysql-bin.log I dump a database from the production and load it into the development and with the same server everything takes half the time !!! What should I check?

  Read the article

• Launching mysql server: same permissions for root and for user

  - by toinbis

  Hi folks, have been directed here from stackoverflow here, am reposting the question and adding my.cnf at the end of a post. so far in my 10+ years experience with linux, all the permission problems I've ever encountered, have been successfully solved with chmod -R 777 /path/where/the/problem/has/occured (every lie has a grain of truth in it :) This time the trick doesn't work, so I'm turning to you for help. I'm compiling mysql server from scratch with zc.buildout (www . buildout . org). I do launch it by executing /home/toinbis/.../parts/mysql/bin/mysqld_safe, this works. The thing is that i'll be launching this from within supervisor (supervisord . org) script, and when used on the deployment server, it'll need it to be launched with root permissions(so that nginx server, launched with the same script, would have access to 80 port). The problem is that sudo /home/toinbis/.../parts/mysql/bin/mysqld_safe, fails, generating the error, posted bellow, in mysql error log (apache and nginx works as expected). http://lists.mysql.com/mysql/216045 suggests, that "there are two errors: A missing table and a file system that mysqld doesn't have access to". Mysqldatadir and all the mysql server binary files has 777 permissions, talbe mysql.plugin does exist and has 777 permissions (why Can't open the mysql.plugin table?), "sudo touch mysql_datadir/tmp/file" does create file (why Can't create/write to file /home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz?). chgrp -R mysql mysql_datadir and adding "root, toinbis, mysql" users to mysql group ( cat /etc/group | grep mysql outputs mysql:x:124:root,toinbis,mysql) has no effect - when i launch it as a casual user, it starts, when as a root - it fails. Does mysql server, even started as root, tries to operate as other, let's say, 'mysql' user? but even in that case, adding mysql user to mysql group and making all the mysql_datadirs files belong to mysql group should make things work smoothly. I do know that it might be a better idea to simply to launch one the nginx as root and mysql - as just a user, but this error irritated me enough so to devote enough energy so not to only "make things work", but to also make things work exactly as i wanted it initially, so to have a proof of concept that it's possible. and this is the generated error: 091213 20:02:55 mysqld_safe Starting mysqld daemon with databases from /home/toinbis/.../runtime/mysql_datadir /home/toinbis/.../parts/mysql/libexec/mysqld: Table 'plugin' is read only 091213 20:02:55 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. /home/toinbis/.../parts/mysql/libexec/mysqld: Can't create/write to file '/home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz' (Errcode: 13) 091213 20:02:55 InnoDB: Error: unable to create temporary file; errno: 13 091213 20:02:55 [ERROR] Plugin 'InnoDB' init function returned error. 091213 20:02:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 091213 20:02:55 [ERROR] Can't start server : Bind on unix socket: Permission denied 091213 20:02:55 [ERROR] Do you already have another mysqld server running on socket: /home/toinbis/.../runtime/var/pids/mysql.sock ? 091213 20:02:55 [ERROR] Aborting 091213 20:02:55 [Note] /home/toinbis/.../parts/mysql/libexec/mysqld: Shutdown complete 091213 20:02:55 mysqld_safe mysqld from pid file /home/toinbis/.../runtime/var/pids/mysql.pid ended My my.cnf (the basedir and datadir(including tempdir) have chmod -R 777 permissions) : [client] socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 [mysqld_safe] socket = /home/toinbis/.../runtime/var/pids/mysql.sock nice = 0 [mysqld] # # * Basic Settings # socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 pid-file = /home/toinbis/.../runtime/var/pids/mysql.pid basedir = /home/toinbis/.../parts/mysql datadir = /home/toinbis/.../runtime/mysql_datadir tmpdir = /home/toinbis/.../runtime/mysql_datadir/tmp skip-external-locking bind-address = 127.0.0.1 log-error =/home/toinbis/.../runtime/logs/mysql_errorlog # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 32M thread_stack = 128K thread_cache_size = 8 myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /home/toinbis/.../runtime/logs/mysql_logs/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration #log_slow_queries = /home/toinbis/.../runtime/logs/mysql_logs/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 #log_bin = /home/toinbis/.../runtime/mysql_datadir/mysql-bin.log #binlog_format = ROW #read_only = 0 #expire_logs_days = 10 #max_binlog_size = 100M #sync_binlog = 1 #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size=64M innodb_log_file_size=16M innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit=1 innodb_file_per_table innodb_locks_unsafe_for_binlog=1 [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completion [isamchk] key_buffer = 16M Any ideas much appreciated! regards, to P.S. sorry for messy hyperlinks, it's my first post and anti-spam feature of SF doesn't allow to post them properly :)

  Read the article

• Logging Apparently Not Working - Can't Set Configure Replication

  - by square_eyes

  I'm using a tutorial to set up a master (single) slave setup. When I run the command show master status; I get Empty set (0.00 sec). I have done a lot of research and believe that the log file I have set up isn't being used properly. The master is a Windows server, and I am administering it through workbench. The log file (log-bin.log) I have configured in the options exists, and is accessible by 'System'. But when I open it as a text file it doesn't have any data. So I'm assuming it's not getting used properly. How can I get the logging happening so I can finish setting up this replication? Edit: Purely for reference here is the tutorial. I followed all the steps and double checked everything up until show master status.

  Read the article

• Logging library for (c++) games

  - by Klaim

  I know a lot of logging libraries but didn't test a lot of them. (GoogleLog, Pantheios, the coming boost::log library...) In games, especially in remote multiplayer and multithreaded games, logging is vital to debugging, even if you remove all logs in the end. Let's say I'm making a PC game (not console) that needs logs (multiplayer and multithreaded and/or multiprocess) and I have good reasons for looking for a library for logging (like, I don't have time or I'm not confident in my ability to write one correctly for my case). Assuming that I need : performance ease of use (allow streaming or formating or something like that) reliable (don't leak or crash!) cross-platform (at least Windows, MacOSX, Linux/Ubuntu) Wich logging library would you recommand? Currently, I think that boost::log is the most flexible one (you can even log to remotely!), but have not good performance update: is for high performance, but isn't released yet. Pantheios is often cited but I don't have comparison points on performance and usage. I've used my own lib for a long time but I know it don't manage multithreading so it's a big problem, even if it's fast enough. Google Log seems interesting, I just need to test it but if you already have compared those libs and more, your advice might be of good use. Games are often performance demanding while complex to debug so it would be good to know logging libraries that, in our specific case, have clear advantages.

  Read the article

• Unable to Install VirtualBox Due to Missing Kernel Module

  - by SoftTimur

  I am trying to install VirtualBox on my Ubuntu. I first tried to sudo apt-get install virtualbox-ose in a terminal, but after the configuration step, it fails with an error: No suitable module for running kernel found When proceeding with starting virtualbox, I get this error: WARNING: The character device /dev/vboxdrv does not exist. Please install the virtualbox-ose-dkms package and the appropriate headers, most likely linux-headers-generic. You will not be able to start VMs until this problem is fixed. So I tried the package from http://www.virtualbox.org/, but starting VirtualBox fails with: WARNING: The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (2.6.38-8-generic-pae) or it failed to load. Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup You will not be able to start VMs until this problem is fixed. So I ran sudo /etc/init.d/vboxdrv setup, but it fails too: * Stopping VirtualBox kernel modules [ OK ] * Uninstalling old VirtualBox DKMS kernel modules [ OK ] * Trying to register the VirtualBox kernel modules using DKMS Error! Your kernel headers for kernel 2.6.38-8-generic-pae cannot be found at /lib/modules/2.6.38-8-generic-pae/build or /lib/modules/2.6.38-8-generic-pae/source. * Failed, trying without DKMS * Recompiling VirtualBox kernel modules * Look at /var/log/vbox-install.log to find out what went wrong The contents of /var/log/vbox-install.log. As I am stuck, I also tried to install kernel-devel with yum, still fruitless: root@ubuntu# yum install kernel-devel Setting up Install Process No package kernel-devel available. Nothing to do Now I've no idea how to correct this. Any ideas?

  Read the article

• Postfix certificate verification failed for smtp.gmail.com

  - by Andi Unpam

  I have problem, my email server using postfix with gmail smtp, i use account google apps, but always ask for SASL authentication failed, I sent an email using php script, after I see the error logs in the wrong password, after I open the URL from the browser and no verification postfixnya captcha and could return, but after 2-3 days later happen like that again. This my config postfix #myorigin = /etc/mailname smtpd_banner = Hostingbitnet Mail Server biff = no append_dot_mydomain = no readme_directory = no myhostname = webmaster.hostingbitnet.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost, webmaster.hostingbitnet.com, localhost.localdomain, 103.9.126.163 relayhost = [smtp.googlemail.com]:587 relay_transport = relay relay_destination_concurrency_limit = 1 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 103.9.126.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all default_transport = smtp relayhost = [smtp.gmail.com]:587 smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/google-apps smtp_sasl_security_options = noanonymous smtp_use_tls = yes smtp_sender_dependent_authentication = yes tls_random_source = dev:/dev/urandom default_destination_concurrency_limit = 1 smtp_tls_CAfile = /etc/postfix/tls/root.crt smtp_tls_cert_file = /etc/postfix/tls/cert.pem smtp_tls_key_file = /etc/postfix/tls/privatekey.pem smtp_tls_session_cache_database = btree:$data_directory/smtp_tls_session_cache smtp_tls_security_level = may smtp_tls_loglevel = 1 smtpd_tls_CAfile = /etc/postfix/tls/root.crt smtpd_tls_cert_file = /etc/postfix/tls/cert.pem smtpd_tls_key_file = /etc/postfix/tls/privatekey.pem smtpd_tls_session_cache_database = btree:$data_directory/smtpd_tls_session_cache smtpd_tls_security_level = may smtpd_tls_loglevel = 1 #secure smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination Log from mail.log Oct 30 14:51:13 webmaster postfix/smtp[9506]: Untrusted TLS connection established to smtp.gmail.com[74.125.25.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 30 14:51:15 webmaster postfix/smtp[9506]: 87E2739400B1: SASL authentication failed; server smtp.gmail.com[74.125.25.109] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 ix9sm156630pbc.7 Oct 30 14:51:15 webmaster postfix/smtp[9506]: setting up TLS connection to smtp.gmail.com[74.125.25.108]:587 Oct 30 14:51:15 webmaster postfix/smtp[9506]: certificate verification failed for smtp.gmail.com[74.125.25.108]:587: untrusted issuer /C=US/O=Equifax/OU=Equifax Secure Certificate Authority Oct 30 14:51:16 webmaster postfix/smtp[9506]: Untrusted TLS connection established to smtp.gmail.com[74.125.25.108]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 30 14:51:17 webmaster postfix/smtp[9506]: 87E2739400B1: to=<[email protected]>, relay=smtp.gmail.com[74.125.25.108]:587, delay=972, delays=967/0.03/5.5/0, dsn=4.7.1, status=deferred (SASL authentication failed; server smtp.gmail.com[74.125.25.108] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 s1sm3850paz.0) Oct 30 14:51:17 webmaster postfix/error[9508]: B3960394009D: to=<[email protected]>, orig_to=<root>, relay=none, delay=29992, delays=29986/5.6/0/0.07, dsn=4.7.1, status=deferred (delivery temporarily suspended: SASL authentication failed; server smtp.gmail.com[74.125.25.108] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 s1sm3850paz.0) BTW I made cert follow the link here http://koti.kapsi.fi/ptk/postfix/postfix-tls-cacert.shtml and it worked, but after 2/3 days my email back to problem invalid SASL, and then i'm required to log in use a browser and enter the captcha there but success log in after input captcha, and my email server can send emails from telnet or php script. but it will be back in trouble after 2/3days later. My question is how to make it permanent certificate? Thanks n greeting.

  Read the article

• How to use HTML markup tags inside Bash script

  - by CONtext

  I have crontab and a simple bash script that sends me emails every often containing PHP, NGINX, MYSQL errors from their log files. This is a simplified example. #/home/user/status.sh [email protected] PHP_ERROR=`tail -5 /var/log/php-fpm/error.log` NGINX_ERROR=`tail -5 /var/log/nginx/error.log` MYSQL_ERROR=`tail /var/log/mysqld.log` DISK_SPACE=`df -h` echo " Today's, server report:: ================================== DISK_SPACE: $DISK_SPACE --------------------------------- MEMORY_USAGE: $MEMORY_USAGE ----------------------------------- NGINX ERROR: $NGINX_ERROR ----------------------------------- PHP ERRORS: $PHP_ERROR ------------------------------------ MYSQL_ERRORS: $MYSQL_ERROR ------------------------------------- " | mail -s "Server reports" $EMAIL I know this is a very basic usage, but as you can see, I am trying to separate the errors, but not of the html tags including \n are working. So, my question is, is it possible to use HTML tags to format the text, if not .. then what are the alternatives.

  Read the article

• Apache start failing after apache config modifications, showing syntax error, cannot load php5apache2_2.dll into server

  - by Sandeepan Nath

  I am stuck again with apache setup guys. I am working on a Windows 7 system. I copied the working php5 installation directory from teammates, copied the necessary .dll files from inside php5 installation folder (like they were in the working setup of teammates) to my windows/system32/. Apache server started successfully with the default apache config file. I was able to access localhost in browser. But php code was not parsing. I noticed no such line like the following in the apache config file:- # PHP5 module LoadModule php5_module D:/php5/php5apache2_2.dll If I add this line, apache server start fails. Running test configuration gives the following error - httpd.exe: Syntax error on line 60 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load D:/php5/php5apache2_2.dll into server: The specified procedure could not be found. But the dll file is there in the specified location and I have given all permissions to the current system user to the php5 installation directory. The same line also appears in the apache error log, though I am not sure when exactly logs are written to the log file. I am confused if log entries are not made if I have opened the log file for reading? lol ... because I could not observe a pattern in when entries are made. I saw some log entries being made, some not. Oh, why is apache setup such a headache always????

  Read the article

• samba 3.5 "force user" doesn't seem to be sticking

  - by myCubeIsMyCell

  After installing a new OS with newer version of samba, I'm having trouble accessing my shares. I can browse to the specific share, but only to the top level. As best I can tell from the logs, it seems the "force user" in the samba config isn't sticking beyond the initial connection. Details below. I installed a new version of CentOS on my storage server. My old CentOS (4?)install had samba version 3.0.33, new CentOS is using 3.5.10. No domain/AD involved ... just home workgroup. no real security... just some shares hidden & some defined as read-only. here's my config: [global] workgroup = WORKGROUP server string = Samba Server Version %v netbios name = luna security = share # logs split per machine log file = /var/log/samba/log.%m log level = 2 # max 50KB per log file, then rotate max log size = 50 winbind use default domain = Yes [strge] comment = please path = /storage browseable = yes read only = no force user = windowsguest force group = users guest ok = yes So... the problem I'm running into is that the 'force user' only seems to hold for the initial connection & I see all the top level folders fine. When I drill into a folder I get access denied - which appears to be due to my windows user info being sent (trys to authenticate xuser - a non-existant user to samba, so maps to nobody & fails). Here's the smb error msg: [2012/11/29 14:30:27.326195, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [xuser] -> [xuser] FAILED with error NT_STATUS_NO_SUCH_USER [2012/11/29 14:30:27.326251, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [nobody] -> [nobody] FAILED with error NT_STATUS_NO_SUCH_USER Most of the top level directories are 755, some 777. Either way, can not access them. If I do a chown -R windowsguest.users ... no change... but if I do a chmod -R to 777 or 755 they become browsable... but still can't create files (even for 777 ones). Not sure what role it plays if any... but had to recreate the user windowsguest under the new os install, uid & gid match old user. Seems the main issue as far as I can tell is that samba isn't maintaining the 'force user' - but I could be wildly off base. Client OS is win7 pro x64. Thanks for any suggestions or advice!

  Read the article

• Apache: domains working fine, subdomains not working anymore

  - by David Lawson

  Hi there, I'm not sure when, but suddenly subdomains aren't working on my server. e.g. www.davidlawson.co works, but david.lawson.co isn't working. <VirtualHost 173.203.109.191:80> ServerAdmin [email protected] ServerName david.lawson.co ServerAlias davidlawson.co ServerAlias www.davidlawson.co DocumentRoot /var/www/lawson/david <Directory /var/www/lawson/david/> Options -Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog /var/log/apache2/lawson/david/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/lawson/david/access.log combined </VirtualHost> Any suggestions on how to debug this further, or what the problem might be?

  Read the article

• Apache config file. Redirect permanent gives 403 error

  - by Homunculus Reticulli

  I am changing my domain from foo.com to foobar.org. I used a Redirect permanent in my apache config file, and then restarted apache. When I try to access the old domain foo.com, I get a 403 error. This is what my apache config file looks like: <VirtualHost *:80> ServerName foo.com #ServerAlias www.foo.com #ServerAdmin [email protected] Redirect permanent / http://www.foobar.org/ DocumentRoot /path/to/project/foo/web DirectoryIndex index.php # CustomLog with format nickname LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foo.access.log" common LogLevel notice ErrorLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foo.errors.log" <Directory /> Order Deny,Allow Deny from all </Directory> <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> <Directory /path/to/project/foo/web> Options -Indexes -Includes AllowOverride All Allow from All RewriteEngine On # We check if the .html version is here (cacheing) RewriteRule ^$ index.html [QSA] RewriteRule ^([^.])$ $1.html [QSA] RewriteCond %{REQUEST_FILENAME} !-f # No, so we redirect to our front end controller RewriteRule ^(.*)$ index.php [QSA,L] </Directory> <Directory /path/to/project/foo/web/uploads> Options -ExecCGI -FollowSymLinks -Indexes -Includes AllowOverride None php_flag engine off </Directory> Alias /sf /lib/vendor/symfony/symfony-1.3.8/data/web/sf <Directory /lib/vendor/symfony/symfony-1.3.8/data/web/sf> # Alias /sf /lib/vendor/symfony/symfony-1.4.19/data/web/sf # <Directory /lib/vendor/symfony/symfony-1.4.19/data/web/sf> Options -Indexes -Includes AllowOverride All Allow from All </Directory> </VirtualHost> Can anyone spot what I may be doing wrong?. The site foobar.org does exist so I don't know why this error occurs - help?

  Read the article

• OpenVPN: ifup tap0 drops all connections

  - by raspi

  I'm trying to create star shaped "virtual" LAN with OpenVPN which is not connected to physical network. ie. tap0 packets should not go to eth0. Packet should only go through OpenVPN to connected clients. This setup works with my OpenVPN testing machine which runs Virtual Box but not on my actual server which is running on top of Xen. Both servers are running Ubuntu Intrepid. /etc/network/interfaces: iface tap0 inet manual address 10.10.10.1 netmask 255.255.255.0 gateway 10.10.10.1 /etc/openvpn/server.conf mode server tls-server port 1194 proto udp dev tap client-to-client ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/servername.crt key /etc/openvpn/easy-rsa/keys/servername.key dh /etc/openvpn/easy-rsa/keys/dh384.pem ifconfig-pool-persist ipp.txt server-bridge 10.10.10.1 255.255.255.0 10.10.10.128 10.10.10.250 push .route 10.10.10.1 255.255.255.0 keepalive 5 60 comp-lzo persist-key persist-tun status /var/log/openvpn-status.log log-append /var/log/openvpn.log verb 3 user nobody group nogroup ifup tap0 on Virtual Box: everything ok, SSH keeps running. But on Xen SSH connection drops and I have to reboot whole machine. What I'm missing?

  Read the article

• Events and objects being skipped in GameMaker

  - by skeletalmonkey

  Update: Turns out it's not an issue with this code (or at least not entirely). Somehow the objects I use for keylogging and player automation (basic ai that plays the game) are being 'skipped' or not loaded about half the time. These are invisible objects in a room that have basic effects such are simulating button presses, or logging them. I don't know how to better explain this problem without putting up all my code, so unless someone has heard of this issue I guess I'll be banging my head against the desk for a bit /Update I've been continuing work on modifying Spelunky, but I've run into a pretty major issue with GameMaker, which I hope is me just doing something wrong. I have the code below, which is supposed to write log files named sequentially. It's placed in a End Room event such that when a player finishes a level, it'll write all their keypress's to file. The problem is that it randomly skips files, and when it reaches about 30 logs it stops creating any new files. var file_name; file_count = 4; file_name = file_find_first("logs/*.txt", 0); while (file_name != "") { file_count += 1; file_name = file_find_next(); } file_find_close(); file = file_text_open_write("logs/log" + string(file_count) + ".txt"); for(i = 0; i < ds_list_size(keyCodes); i += 1) { file_text_write_string(file, string(ds_list_find_value(keyCodes, i))); file_text_write_string(file, " "); file_text_write_string(file, string(ds_list_find_value(keyTimes, i))); file_text_writeln(file); } file_text_close(file); My best guess is that the first counting loop is taking too long and the whole thing is getting dropped? Also, if anyone can tell me of a better way to have sequentially numbered log files that would also be great. Log files have to continue counting over multiple start/stops of the game.

  Read the article

• Apache reverse proxy POST 403

  - by qkslvrwolf

  I am trying to get Jira and Stash to talk to each other via a Trusted Application link. The setup, currently, looks like this: Jira - http - Jira Proxy -https- stash proxy -http- stash. Jira and the Jira proxy are on the same machine. The Jira Proxy is showing 403 Forbidden for POST requests from the stash server. It works (or seems to ) for everything else. I contend that since we're seeing 403 forbiddens in the access log for apache, Jira is never seeing the request. Why is apache forbidding posts,and how do I fix it? Note that the IPs for both Stash and the Stash Proxy are in the "trusted host" section. My config: LogLevel info CustomLog "|/usr/sbin/rotatelogs /var/log/apache2/access.log 86400" common ServerSignature off ServerTokens prod Listen 8443 <VirtualHost *:443> ServerName jira.company.com SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /etc/ssl/certs/server.cer SSLCertificateKeyFile /etc/ssl/private/server.key SSLProtocol +SSLv3 +TLSv1 SSLCipherSuite DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA # If context path is not "/wiki", then send to /jira. RedirectMatch 301 ^/$ https://jira.company.com/jira RedirectMatch 301 ^/gsd(.*)$ https://jira.company.com/jira$1 ProxyRequests On ProxyPreserveHost On ProxyVia On ProxyPass /jira http://localhost:8080/jira ProxyPassReverse /jira http://localhost:8080/jira <Proxy *> Order deny,allow Allow from all </Proxy> RewriteEngine on RewriteLog "/var/log/apache2/rewrite.log" RewriteLogLevel 2 # Disable TRACE/TRACK requests, per security. RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] DocumentRoot /var/www DirectoryIndex index.html <Directory /var/www> Options FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> <LocationMatch "/"> Order deny,allow Deny from all allow from x.x.71.8 allow from x.x.8.123 allow from x.x.120.179 allow from x.x.120.73 allow from x.x.120.45 satisfy any SetEnvif Remote_Addr "x.x.71.8" TRUSTED_HOST SetEnvif Remote_Addr "x.x.8.123" TRUSTED_HOST SetEnvif Remote_Addr "x.x.120.179" TRUSTED_HOST SetEnvif Remote_Addr "x.x.120.73" TRUSTED_HOST SetEnvif Remote_Addr "x.x.120.45" TRUSTED_HOST </LocationMatch> <LocationMatch ^> SSLRequireSSL AuthType CompanyNet PubcookieInactiveExpire -1 PubcookieAppID jira.company.com require valid-user RequestHeader set userid %{REMOTE_USER}s </LocationMatch> </VirtualHost> # Port open for SSL, non-pubcookie access. Used to access APIs with Basic Auth. <VirtualHost *:8443> SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /etc/ssl/certs/server.cer SSLCertificateKeyFile /etc/ssl/private/server.key SSLProtocol +SSLv3 +TLSv1 SSLCipherSuite DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA ProxyRequests On ProxyPreserveHost On ProxyVia On ProxyPass /jira http://localhost:8080/jira ProxyPassReverse /jira http://localhost:8080/jira <Proxy *> Order deny,allow Allow from all </Proxy> RewriteEngine on RewriteLog "/var/log/apache2/rewrite.log" RewriteLogLevel 2 # Disable TRACE/TRACK requests, per security. RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] DocumentRoot /var/www DirectoryIndex index.html <Directory /var/www> Options FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> </VirtualHost> <VirtualHost jira.company.com:80> ServerName jira.company.com RedirectMatch 301 /(.*)$ https://jira.company.com/$1 RewriteEngine on RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </VirtualHost> <VirtualHost *:80> ServerName go.company.com RedirectMatch 301 /(.*)$ https://jira.company.com/$1 RewriteEngine on RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </VirtualHost>

  Read the article

• Setting up SSL on apache on linux ubuntu

  - by ThomasReggi

  I'm trying to get SSL to run on my apache web server. I do not have the DNS for the domain setup yet is that an issue? How do I setup SSL on my web server? When I start apache it fails. root@vannevar:/etc/apache2/ssl# service apache2 start * Starting web server apache2 Action 'start' failed. The Apache error log may have more information. The log stats that it's unable to read the certificate. [Thu Jun 28 15:01:02 2012] [error] Init: Unable to read server certificate from file /etc/apache2/ssl/www.example.com.csr [Thu Jun 28 15:01:02 2012] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Thu Jun 28 15:01:02 2012] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error The contents of /etc/apache2/httpd.conf ServerName [SERVERIP] The contents of /etc/apache2/ports.conf # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz NameVirtualHost [SERVERIP]:443 NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> The contents of /etc/apache2/sites-available/www.example.com <VirtualHost *:80> ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/sites/example.com/public/ ErrorLog /srv/sites/example.com/logs/error.log CustomLog /srv/sites/example.com/logs/access.log combined </VirtualHost> <VirtualHost [SERVERIP]:443> SSLEngine On SSLCertificateFile /etc/apache2/ssl/www.example.com.csr SSLCertificateKeyFile /etc/apache2/ssl/www.example.com.key SSLCACertificateFile /etc/apache2/ssl/comodo.crt ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/sites/example.com/public/ ErrorLog /srv/sites/example.com/logs/error.log CustomLog /srv/sites/example.com/logs/access.log combined </VirtualHost>

  Read the article

• Finding latest successful logins and failed attempts to a CentOS server

  - by ahmad

  I'm looking for a log file or any service to report the latest login attempts which have failed due to username/password miss match. Is there such utility available for CentOS? (built-in is preferred) My second question, and more generally, I need a log file of penetration attempts to my server. Ideally, this log should contain all attempts including logins, httpd activities, and other conventional open ports.

  Read the article

• haproxy not passing X_FORWARD_FOR on HTTP POST

  - by Mark L

  Hello, I've setup HAProxy with the option forwardfor option so it'll pass on the user's IP to PHP via $_SERVER[ "HTTP_X_FORWARDED_FOR" ]. If the page request isn't a POST it's populated fine but if it is then it won't be populated. Any ideas where I've gone wrong? Thanks everyone! My whole HAProxy conf file for reference: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon #debug #quiet defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 4096 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen webfarm :80 mode http balance roundrobin option forwardfor server webA 192.168.240.4 weight 1 maxconn 2048 check server webB 192.168.240.3 weight 1 maxconn 2048 check listen smtp :25 mode tcp option tcplog balance roundrobin server smtp 192.168.240.4:25 check

  Read the article

• Site in subdomain (MaraDNS + Nginx)

  - by Grzegorz

  Welcome, Actually I'm doing some experiments on my VPS with Ubuntu. I've installed MaraDNS with Nginx. At this moment I've correctly launch static site which is available from Internet (maindomain.com). In next step I want to add new site which will be available in subdomain, for example dev.maindomain.com. I've tried to db.maindomain.com file (used by MaraDNS): maindomain.com. xxx.xxx.xxx.xxx www.maindomain.com. CNAME maindomain.com. dev.maindomain.com. xxx.xxx.xxx.xxx Where xxx.xxx.xxx.xxx is VPS IP address. In nginx.conf I have: server { listen 80; server_name maindomain.com; access_log /var/log/nginx/maindomain.com.log location / { root /var/www/maindomain.com; index index.html; } } server { listen 80; server_name dev.maindomain.com; access_log /var/log/nginx/dev.maindomain.com.log location / { root /var/www/dev.maindomain.com; index index.html; } } With this configuration maindomain.com works properly, but dev.maindomain.com isn't available. When I try: ping dev.maindomain.com then I get my xxx.xxx.xxx.xxx IP. Do you have any suggestions how can I resolve this problem?

  Read the article

• Sql Server database logs "missing"

  - by linkerro

  Here's the problem we're having: In the applications that are using the databases we get errors like: The log for database 'redactedDatabaseName' is not available. Check the event log for related error messages. Resolve any errors and restart the database. Cannot close event log because there are still event handle users active. The server log says this: Error: 9001, Severity: 21, State: 1. Context: The server in question is holding databases for a multi-tenant application and lately it's been under quite heavy loads. It has something like 3k small databases on it and these errors have been coming in the last week. We have a work-around right now, which is taking the database offline then bringing it online again. Any ideas why this is happening and how we can fix it?

  Read the article

• Server Admin is not allowing me to configure DNS

  - by Clinton Blackmore

  We have a Mac OS X 10.5.8 Server running DNS (and a few other services). When I connect to it (using Server Admin 10.5.3 [which comes from the Server Admin 10.5.7 tools]), and click to look at the DNS settings, all appears normal -- it shows many reverse entries and two top-level domains. However, when I select one of our domains and open the disclosure triangle, the list is empty! [There should be over a dozen entries, and the reverse entries do show up.] If I then tell it I want to add, say, an A Record to the domain, almost everything disappears -- and I am left with a list showing our two domains, one with a disclosure triangle underneath it showing a single entry, and one reverse entry to correspond to the new A record. named appears to be working fine. DNS names resolve. It appears to simply be that Server Admin is having problems with the data on the computer. No one here would have manually created a DNS entry. Now, while I think I've backed up the DNS (I backed up /var/named/, /etc/named.conf, and /etc/dns/, as mentioned here), I'm really not sure if just replacing the files would restore the DNS settings we have if things go south. I am contemplating going to settings and changing the log level from "Information" to "Debug", but 1) I am just a little concerned that it might write a bad configuration to the disk, and 2) I think it would only affect named and not Server Admin, and, so far as I can tell, named is not having a problem. (Nothing looks strange in /Library/Logs/named.log when I open it via Console/Terminal. Oddly, though, when I click on the 'log' button for DNS in Server Admin, I see no text at all, just a fully white window. When I look at one of our secondary DNS servers, I am able to see the log file through Server Admin.) This entry appears in the system log when I run Server Admin on the server: Jun 17 09:02:08 od1 Server Admin[3892]: Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription It seems to occur after I've looked at DNS, look at another service, and then click back on DNS. Think that the most likely cause is a corrupt configuration file, I glanced through all the files that I backed up, and none of them is obviously gobbledygook. Here are some oddities I find when running Server Admin from a remote computer to manage the DNS. When I click to see the log file for DNS, the server starts writing messages like these to its system.log: Jun 17 09:59:04 od1 kernel[0]: Limiting open port RST response from 252 to 250 packets per second Jun 17 09:59:06 od1 kernel[0]: Limiting open port RST response from 258 to 250 packets per second This stops when I click on a different service. The inderterminate progress indicator (the spinning wheel that appears beside the "Revert" and "Save" buttons in the bottom-right corner of Server Admin) looks really strange. As far as I can tell, instead of just spinning and waiting, it is being told to start spinning repeatedly, resulting in a jerky animation. Here are some of the messages being logged on the computer running Server Admin: At startup: *** ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *** *** ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x18758f50) failed. *** (These messages don't concern me too much as they go away for a while if you delete ~/Library/Preferences/com.apple.ServerAdmin.plist). At shutdown: 2010-06-17 10:02:17.202 Server Admin[7770:10b] *** -[GroupTextField windowDidResignKey:]: unrecognized selector sent to instance 0x16e12490 More concerning are these messages: 2010-06-17 09:59:47.269 Server Admin[7770:10b] Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription Server Admin(7770,0xb0453000) malloc: *** error for object 0x1c115390: double free *** set a breakpoint in malloc_error_break to debug 2010-06-17 10:01:00.795 Server Admin[7770:10b] *** -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2af500 Any thoughts on: what the problem is how I can troubleshoot it or how to fix it? If I do need to wipe out DNS and restart, is there a good way to do this?

  Read the article

• Trying to install wordpress inside rails app with nginx and fastcgi

  - by pinouchon

  I have a rails app (let's call it myapp) running at www.myapp.com. I want to add a wordpress blog at www.myapp.com/blog. The webserver for the rails app is thin (see the upstream block). The wordpress runs with php-fastcgi. The rails app works fine. My problem is the following: in /home/myapp/myapp/log/error.log error I get: 2013/06/24 10:19:40 [error] 26066#0: *4 connect() failed (111: Connection refused) while connecti\ ng to upstream, client: xx.xx.138.20, server: www.myapp.com, request: "GET /blog/ HTTP/1.1", \ upstream: "fastcgi://127.0.0.1:9000", host: "www.myapp.com" Here is the nginx conf file: upstream myapp { server unix:/tmp/thin_myapp.0.sock; server unix:/tmp/thin_myapp.1.sock; server unix:/tmp/thin_myapp2.sock; } server { listen 80; server_name www.myapp.com; client_max_body_size 20M; access_log /home/myapp/myapp/log/access.log; error_log /home/myapp/myapp/log/error.log error; root /home/myapp/myapp/public; index index.html; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; # Index HTML Files if (-f $document_root/cache/$uri/index.html) { rewrite (.*) /cache/$1/index.html break; } if (!-f $request_filename) { proxy_pass http://myapp; break; } # try_files /system/maintenance.html $uri $uri/index.html $uri.html @ruby; } location /blog/ { root /var/www/wordpress; fastcgi_index index.php; if (!-e $request_filename) { rewrite ^(.*)$ /blog/index.php?q=$1 last; } include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/wordpress$fastcgi_script_name; fastcgi_pass localhost:9000; # port to FastCGI } } Any ideas why that doesn't work ? How do I make sure that php-factcgi is configured properly ? Edit: I cant test if fastcgi is running with telnet: $> telnet 127.0.0.1 9000 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused And it's not.

  Read the article

• Apache: Virtual Host and .htacess for URL Rewriting not working

  - by parth

  I have configured virtual host in my local machine and every thing working fine . Now I want to use SEO friendly urls. To achive this I have used .htacess file . My virtual host configuration is : <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/ypp" ServerName ypp.com ServerAlias www.ypp.com ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> and my .htacess file has : AllowOverride All RewriteEngine On RewriteBase /ypp/ RewriteRule ^/browse$ /browse.php RewriteRule ^/browse/([a-z]+)$ /browse.php?cat=$1 RewriteRule ^/browse/([a-z]+)/([a-z]+)$ /browse.php?cat=$1&subcat=$2 The above .htacess setting is not working . After that I have modigied my virtual host setting and it is working . new virtual host setting is : <VirtualHost *:80> RewriteEngine On RewriteRule ^/browse$ /browse.php RewriteRule ^/browse/([a-z]+)$ /browse.php?cat=$1 RewriteRule ^/browse/([a-z]+)/([a-z]+)$ /browse.php?cat=$1&subcat=$2 ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/ypp" ServerName ypp.com ServerAlias www.ypp.com ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined <Directory "C:/xampp/htdocs/ypp"> AllowOverride All </Directory> </VirtualHost> Please guide me where I am wrong in .htacess file for url rewriting . I donot want to use setting in virtual host because for every change I have restart apache .

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >