Search Results

Search found 27244 results on 1090 pages for 'old computer'.

Page 110/1090 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

  - by DragonLord

  One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

  Read the article

• Exalogic 2.0.1 Tea Break Snippets - Scripting Asset Creation

  - by The Old Toxophilist

  So far in this series we have looked at creating asset within the EMOC BUI but the Exalogic 2.0.1 installation also provide the Iaas cli as an alternative to most of the common functionality available within EMOC. The IaaS cli interface provides access to the functions that are available to a user logged into the BUI with the CloudUser Role. As such not all functionality is available from the command line interface however having said that the IaaS cli provides all the functionality required to create the Assets within a specific Account (Tenure). Because these action are common and repeatable I decided to wrap the functionality within a simple script that takes a simple input file and creates the Asset. Following the Script through will show us the required steps needed to create the various Assets within an Account and hence I will work through the various functions within the script below describing the steps. You will note from the various steps within the script that it is designed to pause between actions allowing the proceeding action to complete. The reason for this is because we could swamp EMOC with a series of actions and may end up with a situation where we are trying to action a Volume attached before the creation of the vServer and Volume have completed. processAssets() This function simply reads through the passed input file identifying what assets need to be created. An example of the input file can be found below. It can be seen that the input file can be used to create Assets in multiple Accounts during a single run. The order of the entries define the functions that need to be actioned as follows: Input Command Iaas Actions Parameters Production:Connect akm-describe-accounts akm-create-access-key iaas-create-key-pair iaas-describe-vnets iaas-describe-vserver-types iaas-describe-server-templates Username Password Production:Create|vServer iaas-run-vserver vServer Name vServer Type Name Template Name Comma separated list of network names which the vServer will connect to. Comma separated list of IPs for the specified networks. Production:Create|Volume iaas-create-volume Volume Name Volume Size Production:Attach|Volume iaas-attach-volumes-to-vserver vServer Name Comma separated list of volume names Production:Disconnect iaas-delete-key-pair akm-delete-access-key None connectToAccount() It can be seen from the connectToAccount function that before we can execute any Asset creation we must first connect to the appropriate account. To do this we will need the ID associated with the Account. This can be found by executing the akm-describe-accounts cli command which will return a list of all Accounts and there IDs. Once we have the Account ID we generate and Access key using the akm-create-access-key command and then a keypair with the iaas-create-key-pair command. At this point we now have all the information we need to access the specific named account. createVServer() This function simply retrieved the information from the input line and then will create the vServer using the iaas-run-vserver cli command. Reading the function you will notice that it takes the various input names for vServer Type, Template and Networks and converts them into the appropriate IDs. The IaaS cli will not work directly with component names and hence all IDs need to be found. createVolume() Function that simply takes the Volume name and Size then executes the iaas-create-volume command to create the volume. attachVolume() Takes the name of the Volume, which we may have just created, and a Volume then identifies the appropriate IDs before assigning the Volume to the vServer with the iaas-attach-volumes-to-vserver. disconnectFromAccount() Once we have finished connecting to the Account we simply remove the key pair with iaas-delete-key-pair and the access key with akm-delete-access-key although it may be useful to keep this if ssh is required and you do not subsequently modify the sshd information to allow unsecured access. By default the key is required for ssh access when a vServer is created from the command-line. CreateAssets.sh 1 export OCCLI=/opt/sun/occli/bin 2 export IAAS_HOME=/opt/oracle/iaas/cli 3 export JAVA_HOME=/usr/java/latest 4 export IAAS_BASE_URL=https://127.0.0.1 5 export IAAS_ACCESS_KEY_FILE=iaas_access.key 6 export KEY_FILE=iaas_access.pub 7 #CloudUser used to create vServers & Volumes 8 export IAAS_USER=exaprod 9 export IAAS_PASSWORD_FILE=root.pwd 10 export KEY_NAME=cli.recreate 11 export INPUT_FILE=CreateAssets.in 12 13 export ACCOUNTS_FILE=accounts.out 14 export VOLUMES_FILE=volumes.out 15 export DISTGRPS_FILE=distgrp.out 16 export VNETS_FILE=vnets.out 17 export VSERVER_TYPES_FILE=vstype.out 18 export VSERVER_FILE=vserver.out 19 export VSERVER_TEMPLATES=template.out 20 export KEY_PAIRS=keypairs.out 21 22 PROCESSING_ACCOUNT="" 23 24 function cleanTempFiles() { 25 rm -f $ACCOUNTS_FILE $VOLUMES_FILE $DISTGRPS_FILE $VNETS_FILE $VSERVER_TYPES_FILE $VSERVER_FILE $VSERVER_TEMPLATES $KEY_PAIRS $IAAS_PASSWORD_FILE $KEY_FILE $IAAS_ACCESS_KEY_FILE 26 } 27 28 function connectToAccount() { 29 if [[ "$ACCOUNT" != "$PROCESSING_ACCOUNT" ]] 30 then 31 if [[ "" != "$PROCESSING_ACCOUNT" ]] 32 then 33 $IAAS_HOME/bin/iaas-delete-key-pair --key-name $KEY_NAME --access-key-file $IAAS_ACCESS_KEY_FILE 34 $IAAS_HOME/bin/akm-delete-access-key $AK 35 fi 36 PROCESSING_ACCOUNT=$ACCOUNT 37 IAAS_USER=$ACCOUNT_USER 38 echo "$ACCOUNT_PASSWORD" > $IAAS_PASSWORD_FILE 39 $IAAS_HOME/bin/akm-describe-accounts --sep "|" > $ACCOUNTS_FILE 40 while read line 41 do 42 ACCOUNT_ID=${line%%|*} 43 line=${line#*|} 44 ACCOUNT_NAME=${line%%|*} 45 # echo "Id = $ACCOUNT_ID" 46 # echo "Name = $ACCOUNT_NAME" 47 if [[ "$ACCOUNT_NAME" == "$ACCOUNT" ]] 48 then 49 echo "Found Production Account $line" 50 AK=`$IAAS_HOME/bin/akm-create-access-key --account $ACCOUNT_ID --access-key-file $IAAS_ACCESS_KEY_FILE` 51 KEYPAIR=`$IAAS_HOME/bin/iaas-create-key-pair --key-name $KEY_NAME --key-file $KEY_FILE` 52 echo "Connected to $ACCOUNT_NAME" 53 break 54 fi 55 done < $ACCOUNTS_FILE 56 fi 57 } 58 59 function disconnectFromAccount() { 60 $IAAS_HOME/bin/iaas-delete-key-pair --key-name $KEY_NAME --access-key-file $IAAS_ACCESS_KEY_FILE 61 $IAAS_HOME/bin/akm-delete-access-key $AK 62 PROCESSING_ACCOUNT="" 63 } 64 65 function getNetworks() { 66 $IAAS_HOME/bin/iaas-describe-vnets --sep "|" > $VNETS_FILE 67 } 68 69 function getVSTypes() { 70 $IAAS_HOME/bin/iaas-describe-vserver-types --sep "|" > $VSERVER_TYPES_FILE 71 } 72 73 function getTemplates() { 74 $IAAS_HOME/bin/iaas-describe-server-templates --sep "|" > $VSERVER_TEMPLATES 75 } 76 77 function getVolumes() { 78 $IAAS_HOME/bin/iaas-describe-volumes --sep "|" > $VOLUMES_FILE 79 } 80 81 function getVServers() { 82 $IAAS_HOME/bin/iaas-describe-vservers --sep "|" > $VSERVER_FILE 83 } 84 85 function getNetworkId() { 86 while read line 87 do 88 NETWORK_ID=${line%%|*} 89 line=${line#*|} 90 NAME=${line%%|*} 91 if [[ "$NAME" == "$NETWORK_NAME" ]] 92 then 93 break 94 fi 95 done < $VNETS_FILE 96 } 97 98 function getVSTypeId() { 99 while read line 100 do 101 VSTYPE_ID=${line%%|*} 102 line=${line#*|} 103 NAME=${line%%|*} 104 if [[ "$VSTYPE_NAME" == "$NAME" ]] 105 then 106 break 107 fi 108 done < $VSERVER_TYPES_FILE 109 } 110 111 function getTemplateId() { 112 while read line 113 do 114 TEMPLATE_ID=${line%%|*} 115 line=${line#*|} 116 NAME=${line%%|*} 117 if [[ "$TEMPLATE_NAME" == "$NAME" ]] 118 then 119 break 120 fi 121 done < $VSERVER_TEMPLATES 122 } 123 124 function getVolumeId() { 125 while read line 126 do 127 export VOLUME_ID=${line%%|*} 128 line=${line#*|} 129 NAME=${line%%|*} 130 if [[ "$NAME" == "$VOLUME_NAME" ]] 131 then 132 break; 133 fi 134 done < $VOLUMES_FILE 135 } 136 137 function getVServerId() { 138 while read line 139 do 140 VSERVER_ID=${line%%|*} 141 line=${line#*|} 142 NAME=${line%%|*} 143 if [[ "$VSERVER_NAME" == "$NAME" ]] 144 then 145 break; 146 fi 147 done < $VSERVER_FILE 148 } 149 150 function getVServerState() { 151 getVServers 152 while read line 153 do 154 VSERVER_ID=${line%%|*} 155 line=${line#*|} 156 NAME=${line%%|*} 157 line=${line#*|} 158 line=${line#*|} 159 VSERVER_STATE=${line%%|*} 160 if [[ "$VSERVER_NAME" == "$NAME" ]] 161 then 162 break; 163 fi 164 done < $VSERVER_FILE 165 } 166 167 function pauseUntilVServerRunning() { 168 # Wait until the Server is running before creating the next 169 getVServerState 170 while [[ "$VSERVER_STATE" != "RUNNING" ]] 171 do 172 getVServerState 173 echo "$NAME $VSERVER_STATE" 174 if [[ "$VSERVER_STATE" != "RUNNING" ]] 175 then 176 echo "Sleeping......." 177 sleep 60 178 fi 179 if [[ "$VSERVER_STATE" == "FAILED" ]] 180 then 181 echo "Will Delete $NAME in 5 Minutes....." 182 sleep 300 183 deleteVServer 184 echo "Deleted $NAME waiting 5 Minutes....." 185 sleep 300 186 break 187 fi 188 done 189 # Lets pause for a minute or two 190 echo "Just Chilling......" 191 sleep 60 192 echo "Ahhhhh we're getting there......." 193 sleep 60 194 echo "I'm almost at one with the universe......." 195 sleep 60 196 echo "Bong Reality Check !" 197 } 198 199 function deleteVServer() { 200 $IAAS_HOME/bin/iaas-terminate-vservers --force --vserver-ids $VSERVER_ID 201 } 202 203 function createVServer() { 204 VSERVER_NAME=${ASSET_DETAILS%%|*} 205 ASSET_DETAILS=${ASSET_DETAILS#*|} 206 VSTYPE_NAME=${ASSET_DETAILS%%|*} 207 ASSET_DETAILS=${ASSET_DETAILS#*|} 208 TEMPLATE_NAME=${ASSET_DETAILS%%|*} 209 ASSET_DETAILS=${ASSET_DETAILS#*|} 210 NETWORK_NAMES=${ASSET_DETAILS%%|*} 211 ASSET_DETAILS=${ASSET_DETAILS#*|} 212 IP_ADDRESSES=${ASSET_DETAILS%%|*} 213 # Get Ids associated with names 214 getVSTypeId 215 getTemplateId 216 # Convert Network Names to Ids 217 NETWORK_IDS="" 218 while true 219 do 220 NETWORK_NAME=${NETWORK_NAMES%%,*} 221 NETWORK_NAMES=${NETWORK_NAMES#*,} 222 getNetworkId 223 if [[ "$NETWORK_IDS" != "" ]] 224 then 225 NETWORK_IDS="$NETWORK_IDS,$NETWORK_ID" 226 else 227 NETWORK_IDS=$NETWORK_ID 228 fi 229 if [[ "$NETWORK_NAME" == "$NETWORK_NAMES" ]] 230 then 231 break 232 fi 233 done 234 # Create vServer 235 echo "About to execute : $IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $IP_ADDRESSES" 236 $IAAS_HOME/bin/iaas-run-vserver --name $VSERVER_NAME --key-name $KEY_NAME --vserver-type $VSTYPE_ID --server-template-id $TEMPLATE_ID --vnets $NETWORK_IDS --ip-addresses $IP_ADDRESSES 237 pauseUntilVServerRunning 238 } 239 240 function createVolume() { 241 VOLUME_NAME=${ASSET_DETAILS%%|*} 242 ASSET_DETAILS=${ASSET_DETAILS#*|} 243 VOLUME_SIZE=${ASSET_DETAILS%%|*} 244 # Create Volume 245 echo "About to execute : $IAAS_HOME/bin/iaas-create-volume --name $VOLUME_NAME --size $VOLUME_SIZE" 246 $IAAS_HOME/bin/iaas-create-volume --name $VOLUME_NAME --size $VOLUME_SIZE 247 # Lets pause 248 echo "Just Waiting 30 Seconds......" 249 sleep 30 250 } 251 252 function attachVolume() { 253 VSERVER_NAME=${ASSET_DETAILS%%|*} 254 ASSET_DETAILS=${ASSET_DETAILS#*|} 255 VOLUME_NAMES=${ASSET_DETAILS%%|*} 256 # Get vServer Id 257 getVServerId 258 # Convert Volume Names to Ids 259 VOLUME_IDS="" 260 while true 261 do 262 VOLUME_NAME=${VOLUME_NAMES%%,*} 263 VOLUME_NAMES=${VOLUME_NAMES#*,} 264 getVolumeId 265 if [[ "$VOLUME_IDS" != "" ]] 266 then 267 VOLUME_IDS="$VOLUME_IDS,$VOLUME_ID" 268 else 269 VOLUME_IDS=$VOLUME_ID 270 fi 271 if [[ "$VOLUME_NAME" == "$VOLUME_NAMES" ]] 272 then 273 break 274 fi 275 done 276 # Attach Volumes 277 echo "About to execute : $IAAS_HOME/bin/iaas-attach-volumes-to-vserver --vserver-id $VSERVER_ID --volume-ids $VOLUME_IDS" 278 $IAAS_HOME/bin/iaas-attach-volumes-to-vserver --vserver-id $VSERVER_ID --volume-ids $VOLUME_IDS 279 # Lets pause 280 echo "Just Waiting 30 Seconds......" 281 sleep 30 282 } 283 284 function processAssets() { 285 while read line 286 do 287 ACCOUNT=${line%%:*} 288 line=${line#*:} 289 ACTION=${line%%|*} 290 line=${line#*|} 291 if [[ "$ACTION" == "Connect" ]] 292 then 293 ACCOUNT_USER=${line%%|*} 294 line=${line#*|} 295 ACCOUNT_PASSWORD=${line%%|*} 296 connectToAccount 297 298 ## Account Info 299 getNetworks 300 getVSTypes 301 getTemplates 302 303 continue 304 fi 305 if [[ "$ACTION" == "Create" ]] 306 then 307 ASSET=${line%%|*} 308 line=${line#*|} 309 ASSET_DETAILS=$line 310 if [[ "$ASSET" == "vServer" ]] 311 then 312 createVServer 313 314 continue 315 fi 316 if [[ "$ASSET" == "Volume" ]] 317 then 318 createVolume 319 320 continue 321 fi 322 fi 323 if [[ "$ACTION" == "Attach" ]] 324 then 325 ASSET=${line%%|*} 326 line=${line#*|} 327 ASSET_DETAILS=$line 328 if [[ "$ASSET" == "Volume" ]] 329 then 330 getVolumes 331 getVServers 332 attachVolume 333 334 continue 335 fi 336 fi 337 if [[ "$ACTION" == "Connect" ]] 338 then 339 disconnectFromAccount 340 341 continue 342 fi 343 done < $INPUT_FILE 344 } 345 346 # Should Parameterise this 347 348 while [ $# -gt 0 ] 349 do 350 case "$1" in 351 -a) INPUT_FILE="$2"; shift;; 352 *) echo ""; echo >&2 \ 353 "usage: $0 [-a <Asset Definition File>] (Default is CreateAssets.in)" 354 echo""; exit 1;; 355 *) break;; 356 esac 357 shift 358 done 359 360 361 362 363 processAssets 364 365 echo "**************************************" 366 echo "***** Finished Creating Assets *****" 367 echo "**************************************" 368 CreateAssetsProd.in Production:Connect|exaprod|welcome1 Production:Create|vServer|VS006|VSTProduction|BaseOEL56ServerTemplate|EoIB-otd-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.223.13,192.168.0.13,10.117.81.67,172.17.0.14 Production:Create|vServer|VS007|VSTProduction|BaseOEL56ServerTemplate|EoIB-otd-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.223.14,192.168.0.14,10.117.81.68,172.17.0.15 Production:Create|vServer|VS008|VSTProduction|BaseOEL56ServerTemplate|EoIB-wls-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.225.61,192.168.0.61,10.117.81.61,172.17.0.16 Production:Create|vServer|VS009|VSTProduction|BaseOEL56ServerTemplate|EoIB-wls-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.225.62,192.168.0.62,10.117.81.62,172.17.0.17 Production:Create|vServer|VS000|VSTProduction|BaseOEL56ServerTemplate|EoIB-wls-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.225.63,192.168.0.63,10.117.81.63,172.17.0.18 Production:Create|vServer|VS001|VSTProduction|BaseOEL56ServerTemplate|EoIB-wls-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.225.64,192.168.0.64,10.117.81.64,172.17.0.19 Production:Create|vServer|VS002|VSTProduction|BaseOEL56ServerTemplate|EoIB-wls-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.225.65,192.168.0.65,10.117.81.65,172.17.0.20 Production:Create|vServer|VS003|VSTProduction|BaseOEL56ServerTemplate|EoIB-wls-prod,vn-prod-web,IPoIB-default,IPoIB-vserver-shared-storage|10.51.225.66,192.168.0.66,10.117.81.66,172.17.0.21 Production:Create|Volume|VS006|50 Production:Create|Volume|VS007|50 Production:Create|Volume|VS008|50 Production:Create|Volume|VS009|50 Production:Create|Volume|VS000|50 Production:Create|Volume|VS001|50 Production:Create|Volume|VS002|50 Production:Create|Volume|VS003|50 Production:Attach|Volume|VS006|VS006 Production:Attach|Volume|VS007|VS007 Production:Attach|Volume|VS008|VS008 Production:Attach|Volume|VS009|VS009 Production:Attach|Volume|VS000|VS000 Production:Attach|Volume|VS001|VS001 Production:Attach|Volume|VS002|VS002 Production:Attach|Volume|VS003|VS003 Production:Disconnect Development:Connect|exadev|welcome1 Development:Create|vServer|VS014|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.24,10.117.81.71,172.17.0.24 Development:Create|vServer|VS015|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.25,10.117.81.72,172.17.0.25 Development:Create|vServer|VS016|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.26,10.117.81.73,172.17.0.26 Development:Create|vServer|VS017|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.27,10.117.81.74,172.17.0.27 Development:Create|vServer|VS018|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.28,10.117.81.75,172.17.0.28 Development:Create|vServer|VS019|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.29,10.117.81.76,172.17.0.29 Development:Create|vServer|VS020|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.30,10.117.81.77,172.17.0.30 Development:Create|vServer|VS021|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.31,10.117.81.78,172.17.0.31 Development:Create|vServer|VS022|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.32,10.117.81.79,172.17.0.32 Development:Create|vServer|VS023|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.33,10.117.81.80,172.17.0.33 Development:Create|vServer|VS024|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.34,10.117.81.81,172.17.0.34 Development:Create|vServer|VS025|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.35,10.117.81.82,172.17.0.35 Development:Create|vServer|VS026|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.36,10.117.81.83,172.17.0.36 Development:Create|vServer|VS027|VSTDevelopment|BaseOEL56ServerTemplate|EoIB-development,IPoIB-default,IPoIB-vserver-shared-storage|10.51.224.37,10.117.81.84,172.17.0.37 Development:Create|Volume|VS014|50 Development:Create|Volume|VS015|50 Development:Create|Volume|VS016|50 Development:Create|Volume|VS017|50 Development:Create|Volume|VS018|50 Development:Create|Volume|VS019|50 Development:Create|Volume|VS020|50 Development:Create|Volume|VS021|50 Development:Create|Volume|VS022|50 Development:Create|Volume|VS023|50 Development:Create|Volume|VS024|50 Development:Create|Volume|VS025|50 Development:Create|Volume|VS026|50 Development:Create|Volume|VS027|50 Development:Attach|Volume|VS014|VS014 Development:Attach|Volume|VS015|VS015 Development:Attach|Volume|VS016|VS016 Development:Attach|Volume|VS017|VS017 Development:Attach|Volume|VS018|VS018 Development:Attach|Volume|VS019|VS019 Development:Attach|Volume|VS020|VS020 Development:Attach|Volume|VS021|VS021 Development:Attach|Volume|VS022|VS022 Development:Attach|Volume|VS023|VS023 Development:Attach|Volume|VS024|VS024 Development:Attach|Volume|VS025|VS025 Development:Attach|Volume|VS026|VS026 Development:Attach|Volume|VS027|VS027 Development:Disconnect This entry was originally posted on the The Old Toxophilist Site.

  Read the article

• Does SQL Server Maintainance Cleanup consider exact times when deleting old backups?

  - by Heinzi

  Let's say I have a daily maintainance task that: Backups all databases and then removes backups that are older than 3 days. Now let's say the first backup at day 1, starting at 10:00, results in the following files db1.bak 2012-01-01 10:04 db2.bak 2012-01-01 10:06 Now let's say at day 4 the first step of the maintainance task (backup the DBs) happens to finish at 10:05. Will SQL Server delete db1.bak and keep db2.bak (would be logical, but might be surprising for the user) or keep both or remove both?

  Read the article

• Ubuntu 12.04: apt-get "failed to fetch"; apt is trying to fetch via old static IP

  - by gabe

  Sample error: W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/universe/i18n/Translation-en Unable to connect to 192.168.1.70:8118: Now this was working just fine until I changed the IP this morning. I have the server set to a static IP of 10.0.1.70 and for years it has been 192.168.1.70 - the IP apt-get is trying to use right now. I use privoxy and tor thus the 8118 port. Like I said it all worked until I changed the static IP from 192.168.1.70 to 10.0.1.70. I was forced to do so because of router issues. (Long and involved story, I didn't really want to change the IP because I know something like this would happen.) The setup for TOR/Privoxy requires that has you point Privoxy at TOR via 127.0.0.1:9050. Then point curl, etc to Privoxy via $HOME/.bashrc. Typically you would set the listen to IP for Privoxy to 127.0.0.1 but if you want it accessible to the rest of the LAN you set the IP to the server's LAN IP. Which I did a long time ago and was working fine until this morning. I have changed all instances of 192.168.1.70 to 10.0.1.70 in both /etc/privoxy/config and $HOME/.bashrc. What makes this really strange for me is that curl is working fine. I curl icanhazip.com and voila I get a new IP every 10 minutes or so. I curl CNN.com and I get the short but sweet permanently moved to www.cnn.com message I expect. Firefox works fine. Ping works fine. And I've tested all of this via Remote Desktop over my LAN. So the connection appears to be fine for everything except apt. I've also rebooted hoping that would clear 192.168.1.70 from apt. So the connection to the internet and DNS aren't an issue for these programs. And they are, as far as I can tell, using Privoxy/TOR just fine. The real irony here is that I've tried to open up Privoxy to go to Ubuntu's servers directly without going through TOR to speed up the downloads from Ubuntu (did this months ago). So somewhere that I have not been able to find, apt has stored the IP 192.168.1.70. And 192.168.1.70 is no longer valid. Thanks for the help

  Read the article

• How to use my computer as a Headset device for my phone with Bluetooth?

  - by TheJelly

  I want to extract the audio from my phone (the analog TV and FM/AM receiver mainly) and play it through my computer speakers. There is a headphone jack but it is of non-standard size (probably a micro-jack) and I do not have access to a shop that sells that kind of equipment in my area so doing this with Bluetooth is the only solution I can foresee. Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP (although it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer). I am currently using the latest version of the Toshiba stack, I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth (which is a Broadcom device) and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not work with both of my devices as they do not detect any Bluetooth devices when scanning. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Image: Device type selection http://i.stack.imgur.com/drjC6.jpg

  Read the article

• Is Linux Virtual Server old, or is it standing still?

  - by Vimvq1987

  Based on this question: http://serverfault.com/questions/124905/widely-used-load-balancing-solutions, LVS may be the right solution for my problem. But when I went to its homepage http://www.linuxvirtualserver.org/, I found that LVS has been updated since Nov, 2008. The world's moving fast, and I don't know if LVS was obsolete or not. Is LVS standing still, or there're some better solutions to replace it? Thank you so much.

  Read the article

• Multiple computers on Ubuntu One

  - by L R Bellmore Jr

  I have added files from 4 computers to Ubuntu One. One computer failed. What happens to the files that I uploaded. Are they still on Ubuntu One? How come when I upload a file from computer A, computer B with the same Ubuntu One account does not sync and load that file into computer B - That has created this question.. what happens to files from computers from which I uploaded documents when those computers are no longer active or failed, or no longer have Ubuntu One on that computer from which the files were uploaded... Have I lost the files? The followup question is how come files from Computer A uploaded to Ubuntu One don't sync to Computer B. That is a related question. I need to shut down a computer, reformat the hard drive and install Linux on the entire harddrive instead of a dual boot with Windows XP as I am going to use Virtual Machines instead.. what happens to the files from the Windows Dual Boot that were uploaded to Ubuntu One? Are they removed from Ubuntu One and then have I lost those files if I don't backup to another service first.

  Read the article

• Logrotate not doing any rotation

  - by blizz

  I just set up LogRotate on my RHEL6 server so that it rotates my custom Apache log files. However, it doesn't do anything when i try manually running it. I expect it to rotate the log files "access.log" and "err.log". They have been there for a few days and need to be rotated. Here is the output: [root@pc1 httpd]# logrotate -d -f /etc/logrotate.d/apache reading config file /etc/logrotate.d/apache reading config info for /var/log/httpd/*log /var/www/html/NSLogs/access.log /var/www/html/NSErrorLogs/err.log Handling 1 logs rotating pattern: /var/log/httpd/*log /var/www/html/NSLogs/access.log /var/www/html/NSErrorLogs/err.log forced from command line (no old logs will be kept) empty log files are rotated, old logs are removed considering log /var/log/httpd/access_log log needs rotating considering log /var/log/httpd/error_log log needs rotating considering log /var/www/html/NSLogs/access.log log needs rotating considering log /var/www/html/NSErrorLogs/err.log log needs rotating rotating log /var/log/httpd/access_log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_log_t:s0 renaming /var/log/httpd/access_log to /var/log/httpd/access_log-20131023 disposeName will be /var/log/httpd/access_log-20131023.gz running postrotate script running script with arg /var/log/httpd/access_log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/log/httpd/access_log-20131023.gz error: error opening /var/log/httpd/access_log-20131023.gz: No such file or directory rotating log /var/log/httpd/error_log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_log_t:s0 renaming /var/log/httpd/error_log to /var/log/httpd/error_log-20131023 disposeName will be /var/log/httpd/error_log-20131023.gz running postrotate script running script with arg /var/log/httpd/error_log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/log/httpd/error_log-20131023.gz error: error opening /var/log/httpd/error_log-20131023.gz: No such file or directory rotating log /var/www/html/NSLogs/access.log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_sys_rw_content_t:s0 renaming /var/www/html/NSLogs/access.log to /var/www/html/NSLogs/access.log-20131023 disposeName will be /var/www/html/NSLogs/access.log-20131023.gz running postrotate script running script with arg /var/www/html/NSLogs/access.log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/www/html/NSLogs/access.log-20131023.gz error: error opening /var/www/html/NSLogs/access.log-20131023.gz: No such file or directory rotating log /var/www/html/NSErrorLogs/err.log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_sys_rw_content_t:s0 renaming /var/www/html/NSErrorLogs/err.log to /var/www/html/NSErrorLogs/err.log-20131023 disposeName will be /var/www/html/NSErrorLogs/err.log-20131023.gz running postrotate script running script with arg /var/www/html/NSErrorLogs/err.log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/www/html/NSErrorLogs/err.log-20131023.gz error: error opening /var/www/html/NSErrorLogs/err.log-20131023.gz: No such file or directory

  Read the article

• Can I use Ubuntu One to sync data fiies between two remote computers

  - by Sleepy John

  I've got two computers, both running Ubuntu with files in their home folders sync'd in to Ubuntu One. I'd like to know if it's possible to make Ubuntu One automatically download data changes that have been uploaded automatically to Ubuntu One from one computer to the equivalent data file in the other. Clarifying a bit further, I've installed Red Notebook in both computers and so they each have their own /.rednotebook/data folder containing a series of .txt files corresponding to the monthly entries in each of them. These are sync'd to upload any changes to those .txt files to Ubuntu One. My question is can I, and if so how, do I make Ubuntu One automatically download and replace those .txt files in the other computer after they've been updated and uploaded from the first computer? I did labouriously manage to download all those text files which had been uploaded from the first computer, from Ubuntu One one-by-one to the second computer, but what I want to do is automate this process and that's where I'm stuck. I'm aware that things could get a bit complicated if both my computers were on-line at the same time and both were simultaneously making different Red Notebook entries, so that's not the scenario I'm trying to cover. All I want to achieve is that whatever updates to the files have been uploaded by one computer, will automatically be downloaded to the same-named files in the other computer as soon as that second computer appears on line and detects that Ubuntu One has matching but more recent sync'd files than the ones it's holding.

  Read the article

• Migrating to new dovecot server; Dovecot fails to authenticate using old password database

  - by Ironlenny

  I am migrating my companies intranet from a OS X server to an Ubuntu 12.04 server. We use a flat file to store user names and passwords hashs. This file is used by Apache and Dovecot to authenticate users. The Ubuntu server is running Dovecot 2.0 while the OS X server is running Dovecot 1.2. I have already migrated WebDav which uses Apache for authentication. Authentication works. I'm in the process of migrating our Prosody server which uses Dovecot for authentiation. Dovecot is up and running, but when I test authentication using either telnet a login username password or doveadm sudo doveadm auth username, I get dovecot: auth: passwd-file(username): unknown user dovecot: auth: Debug: client out: FAIL#0111#011user=username in my log file. I can use sudo dovecot user username to perform a user lookup and it will return the user's info. I can generate a password hash locally and Dovecot will authenticate the test password just fine.

  Read the article

• What are the side-effects of disabling the old Lan Manager hash?

  - by Bigbio2002

  All of the computers in our domain are running Windows XP/Server 2003 and above (with one exception, a Win2Ksp4 server, which is not a domain controller). I intend to disable the LM hashes via group policy as indicated in KB299656, and want to ensure that there won't be any unforseen problems or side-effects. Does anyone have experience with performing this change? Are there any caveats that I should keep in mind?

  Read the article

• rsync not copying hard links

  - by A.Ellett

  I have two computers (both MacBook Airs) for which I sync one directory tree in both, but not the entire hard drive or any other directories. Let's say on computer A the directory is /Users/aellett/projects Let's say on computer B the directory is /Users/bellett/projects Generally, I'll log into computer B and then remotely connect to computer A as user 'aellett'. As super user I sync the two project directories as follows: rsync -av /Volumes/aellett/projects/ /Users/bellett/projects/ and this works as expected. On both computers I have another file letter.txt in a different directory which is not getting synced. Let's say on computer A the file is found in /Users/aellett/letters On computer B the file is found in /Users/bellett/correspondence Generally, I don't want to share what's not included in /Users/<username>/projects. But I do want to share this particular file. So on both computer I made a correspondence directory in projects. And then I made hard links as follows On computer A: ln /Users/aellett/letters/letter.txt /Users/aellett/projects/correspondence/letter.txt On computer B: ln /Users/bellett/correspondence/letter.txt /Users/aellett/projects/correspondence/letter.txt The next time I synced the two computers I did the following rsync -av -H /Volumes/aellett/projects/ /Users/bellett/projects/ When I checked on computer B, /Users/bellett/projects/correspondence/letter.txt was correctly synced. But, the hardlink to /Users/bellett/correspondence/letter.txt was no longer there. In other words, /Users/bellett/projects/correspondence/letter.txt was identical to /Users/aellett/projects/correspondence/letter.txt but it differed from /Users/bellett/correspondence/letter.txt. Since these two files were hard linked on both computers, I expected them to still have the hard link. Why are my hard links not being preserved?

  Read the article

• Computer: Tea. Earl Gray. Hot.

  - by Randolpho St. John

  I just bought an awesome geek mug and thought I'd share:   You can get it too, if you head over to Cafe Press.

  Read the article

• Should I install Windows 7 on a 3 years old PC?

  - by Jitendra vyas

  This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• Do I need a degree in Computer Science to get a junior Programming job?

  - by t84

  Do I need to go to Uni to get a job as a Junior C# coder? I'm 26 and have been working in Games (Production) for 6 years and I am thinking of a change, I've had exposure to VB6, VBA, HTML, CSS, PHP, JavaScript over the past few years and did a web design NCFE at College, but other than that, nothing else! I'm teaching myself C# at the moment with books and I was wondering 'how much' I need to learn and also how I can improve my chances of getting a programming job! Am I a late started to learn coding? (I know many people who started at a very young age!) Thanks for the help :)

  Read the article

• Can I use my computer as an A2DP receiver?

  - by Pierre-Yves Gillier

  First, the problem: I'm using a Cowon MP3 player as my main music player with basic earplugs. It offers A2DP & I'd like to have my netbook (running UNE 10.04) act as receiver. Some resources on the web about a2dp, but most are out of date: http://fosswire.com/post/2008/10/better-bluetooth-audio/ http://jprvita.wordpress.com/2009/12/15/1-2-3-4-a2dp-stream/ http://dpillay.wordpress.com/2010/09/27/ubuntu-10-04-a2dp-awesome-headset-music/

  Read the article

• What is the old AIX & RS/6000 console font?

  - by Xepoch

  I'm sick of Lucida Console font on my putty sessions. I used to love whatever font was employed on IBM rs/6000 consoles. Does anyone know the name of that font and if it is available (and usable) from anywhere? Sorry, I need to clarify the "consoles" to which I refer were not the serial consoles but rather smaller stand-alone X-Window systems. They could be setup without XDM and would start in text screen. I'm searching like crazy to find the actual machines I remember (there were hundreds of them at Uni) but I don't have the IBM #s in front of me. It looked amazingly similar to the PS/2 like this:

  Read the article

• Network bridge does not work on Windows 7

  - by D. Strout

  I am trying to use Windows 7 to bridge my wireless and wired connections together to get wireless on a second Windows XP computer (fresh install). The network bridge is created successfully, but when I connect the cable from the first computer with the bridged connections to the second one with just a wired connection, nothing happens. The second computer doesn't connect, and the first computer shows no sign of anything different. I tried bridging the connections of a third computer, and connecting this computer to the second computer. This worked (third computer bridged the wireless to the second computer). Thus, the problem must be with the first (Win 7) computer. However, I have no idea what the problem could be. All Internet Connection Sharing is turned off. Homegroup is disabled (it was originally enabled, I thought that might be a problem, so I disabled it). Also, I had VMWare fusion installed, and that created extra items in the "This connection uses the following items" box in the properties dialog. Thinking this might be causing issues, I uninstalled that too. Still, with everything I tried, I can't get it to work. Any suggestions? Edit: Another thing I noticed that might be worth mentioning: The network icon in the Win7 taskbar has a red X on it that means it's not connected, but when I click the icon, it says connected next to my wireless connection, and I am able to access the internet.

  Read the article

• How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

  - by Qwerty

  This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

  Read the article

• Where to download old version of safari for this iphone emulator ?

  - by asksuperuser

  I want to use this iphone emulator http://labs.blackbaud.com/NetCommunity/article?artid=662 It's not compatible with last version of safari. It says it requires v 531.x of webkit.

  Read the article

• Do I need a degree in Computer Science to get a Jr Programming job in the world? [closed]

  - by t84

  As above really, do I need to go to Uni to get a job as a Junior C# coder? I'm 26 and have been working in Games (Production) for 6 years and I am thinking of a change, I've had exposure to VB6, VBA, HTML, CSS, PHP, JavaScript over the past few years and did a web design NCFE at College, but other than that, nothing else! I'm teaching myself C# at the moment with books and I was wondering 'how much' I need to learn and also how I can improve my chances of getting a programming job! Am I a late started to learn coding? (I know many people who started at a very young age!) Thanks for the help :)

  Read the article

• How to move my data from my old MacBook Pro to my new one?

  - by Tim Büthe

  I just purchased a new MacBook Pro and already got an 2008 model. I wonder how I move all my data over to the new one. My first idea was, to use my Time Machine backup and restore from it, which seems to be a good idea and should work just fine regarding to this link: http://blog.duncandavidson.com/2008/01/restoring-from-time-machine.html. But, since my current MacBook got older Software on it, like iLife '08 instead of iLife '09 I would have to upgrade this afterwards. Is this correct, or does Time Machine does some magic to exclude well known software? And is it possible to reinstall or upgrade iLife with the included installation DVDs? My second idea is, to just swap the hard drives instead of using the Time machine backup. If it is not too complicated to remove the hdd, this should be the fastest way. This also has the benefit, that the 2008er MacBook then contains a brand new installation and I don't have to remove all my stuff or reinstall Mac OS before I give it away. My question on that second idea would be: does snow leopard handle this stuff correctly? I reboot with the new hardware and all just works fine? So in a nutshell: What would you do: restore from backup or swap drives? And what about the new software?

  Read the article

• How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

  - by Qwerty

  Hi all, This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

  Read the article

• Can computer crashes and reboots mean weak power supply?

  - by TomA

  Recently I replaced the videocard in my PC for a newer, faster one. All games work perfectly but I get random system crashes and reboots. This happens even when the system is almost idle (browsing, playing music). It never happened with the old card. All drivers are up-to-date. Is it possible that the power supply is not powerful enough for the new card?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >