post - Page 110 - Developer IT

Search Engine Optimization Marketing Strategies That Guarantee Targeted Traffic

Search engine optimization experts advise you include your keywords in your post heading and make sure that the first sentence also has the same keywords. This is because when people are browsing the internet the first sentence in your post is automatically picked as the...

Read the article

Use an audio/video file from a Linux laptop via USB to be played by Magic Sing ET-23H

- by AisIceEyes

I am one of the technical directors of a regular karaoke contest event. For the karaoke contest itself, due to tight budget, we are using what one of the sponsors are providing - Magic Sing ET-23H . The video output of the Magic Sing ET-23H are broadcasted at two big screens that are being shown to the audience and event attendees. When a karaoke contestant provides his / her karaoke video, the video itself is in a readable USB flashdrive and is attached to the USB input of Magic Sing ET-23H. What really bugs me is that the interface of Magic Sing ET-23H are also being broadcasted at the big screen video feeds. The interface of choosing the video file is being seen in the Magic Sing ET-23H - also to the big video screens that are seen by the audience and event goers. I will post in the comments ( if my less than 10 reputation would allow me) the picture of Magic Sing ET-23KH USB input of the device. I always bring my laptop, Acer AS5742-7653, during the regular karaoke event. I'm using my laptop also for tallying of scores from the judges, and also playing audio files from contestants that did not provide a karaoke video. I personally am using different Linux distros, but I next to all the time use my Ubuntu Studio 12.04.3 64bit partition during the regular karaoke contest event. My question is this: Is there a way I can share a temporary video/audio file directly from the laptop I'm using, going to the Magic Sing ET-23H that can broadcast both the video/audio file? Just like how in Window's Avisynth AVS files, or VirtualDub's temporary avi file, or like using ffplay (of ffmpeg), etc. I have researched somewhat the matter and found links in SuperUser.com. Though I can only provide the links at the comments section of this post if my reputation of less than 10 would allow me. I have a hunch it is possible, but I have not fully understood the device being used at the event, Magic Sing ET-23H, if there are other ways for it to broadcast video and audio files besides its USB input. Any help to my current predicament is highly appreciated. Thank you. PS: Since I need at least 10 reputation to post more than 2 links and also post images, I will try to post the image & links at the comments (if my below 10 reputation would allow me).

Read the article

Nginx Rewrite Rule For File Within Folder Not Working

- by user3620111

Good evening everyone or possible early morning if you are in my neck of the woods. My problem seems trivial but after several hours of testing, researching and fiddling I can't seem to get this simple nginx rewrite function to work. There are several rewrites we need, some will have multiple parameters but I cant even get this simple 1 parameter current url to alter at all to the desired. Current: website.com/public/viewpost.php?id=post-title Desired: website.com/public/post/post-title Can someone kindly point me to as what I have done wrong, I am baffled / very tired... For testing purposes before we launch we were just using a simple port on the server. Here is that section. # Listen on port 7774 for dev test server { listen 7774; server_name localhost; root /usr/share/nginx/html/paa; index index.php home.php index.html index.htm /public/index.php; location ~* /uploads/.*\.php$ { if ($request_uri ~* (^\/|\.jpg|\.png|\.gif)$ ) { break; } return 444; } location ~ \.php$ { try_files $uri @rewrite =404; fastcgi_index index.php; include fastcgi_params; fastcgi_pass php5-fpm-sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location @rewrite { rewrite ^/viewpost.php$ /post/$arg_id? permanent; } } I have tried countless attempts such as above @rewrite and simpler: location / { rewrite ^/post/(.*)$ /viewpost.php?id=$1 last; } location ~ \.php$ { try_files $uri =404; fastcgi_index index.php; include fastcgi_params; fastcgi_pass php5-fpm-sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } I can not seem to get anything to work at all, I have tried changing the location tried multiple rules... Please tell me what I have done wrong. Pause for facepalm [relocated from stack overflow as per mod suggestion]

Read the article

When I restart my virtual enviorment it does not re-bind to the IP address

- by RoboTamer

The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

Read the article

When I restart my LXC environment, the container does not re-bind to the IP address

- by RoboTamer

The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

Read the article

gitolite mac don't add new user to authorized_keys

- by crashbus

I installed gitolite and every thing works fine for me as admin. But when I'd like to add add a new user the new user can't connect to the server. After I looked into the file authorized_keys I saw that the new user wasn't added to the file. During the commit of the new public-key I get some workings: WARNING: split conf not set, gl-conf present for 'gitolite-admin' Counting objects: 6, done. Delta compression using up to 8 threads. Compressing objects: 100% (4/4), done. Writing objects: 100% (4/4), 882 bytes, done. Total 4 (delta 1), reused 0 (delta 0) remote: WARNING: split conf not set, gl-conf present for 'gitolite-admin' remote: WARNING: ?? @staff christianwaldmann markwelch remote: sh: find: command not found remote: sh: find: command not found remote: sh: sort: command not found remote: sh: find: command not found remote: /usr/local/bin/triggers/post-compile/update-gitweb-access-list: line 26: cut: command not found remote: /usr/local/bin/triggers/post-compile/update-gitweb-access-list: line 23: grep: command not found remote: /usr/local/bin/triggers/post-compile/update-gitweb-access-list: line 26: sort: command not found remote: /usr/local/bin/triggers/post-compile/update-gitweb-access-list: line 26: sed: command not found remote: sh: find: command not found remote: sh: find: command not found How can I fix it that gitolite auto-add the new user to the authorized_keys.

Read the article

IE6 does not follow 302 redirect - displays 404 instead

- by Dexter

One of our clients has reported that they are experiencing 404 (file not found) errors when attempting to navigate a website that we support. The behaviour only appears to affect her - other users on the same machine can navigate the website fine, but the problem follows her from one PC to another. I've had a good look through the IIS server logs and have identified the requests in question. The normal request pattern is as follows: POST /page.aspx - 80 - ... 401 1 0 POST /page.aspx - 80 DOMAIN/user ... 302 0 0 GET /anotherPage.aspx Request=833f80a5-f34c-4b0e-addb-d73e1ee1663a 80 - ... 401 1 0 GET /anotherPage.aspx Request=833f80a5-f34c-4b0e-addb-d73e1ee1663a 80 DOMAIN/user ... 200 0 However, requests for the affected user do not include a request for the redirected page, nor an entry for the 404, i.e.: POST /page.aspx - 80 - ... 401 1 0 POST /page.aspx - 80 DOMAIN/user ... 302 0 0 ... other unrelated requests Can anyone suggest what might trigger this behaviour, and how I might investigate the cause or prevent it from occuring? I read here that the Allow META refresh option in IE6 might trigger this behaviour, but I have not been able to replicate the behaviour by modifying this setting only.

Read the article

Uploading to another domain gives HTTP code 405

- by dragon112

I'm trying to upload a file (which can be quite large) from the website of one server to the backend of another server using plupload. Lets say: domain 1 = http://www.websitedomain.com/uploadform domain 2 = http://www.backenddomain.com/uploadhandler Trying to upload i send the following: OPTIONS /main/uploadnetwork.php HTTP/1.1 Host: backenddomain.com Connection: keep-alive Access-Control-Request-Method: POST Origin: http://www.websitedomain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Access-Control-Request-Headers: origin, content-type Accept: */* Referer: http://www.websitedomain.com/uploadform Accept-Encoding: gzip,deflate,sdch Accept-Language: nl-NL,nl;q=0.8,en-US;q=0.6,en;q=0.4 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 DNT: 1 But when I try to start the upload the server returns the following: HTTP/1.1 405 Method Not Allowed Allow: GET, HEAD, OPTIONS, TRACE Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET X-Powered-By-Plesk: PleskWin Date: Mon, 01 Oct 2012 12:41:57 GMT Content-Length: 999 After doing some research I found out that a browser does this to check if the server will accept the intended message. It looks like my server doesn't feel like accepting a simple POST call even tho i use post all the time. The Google Chrome console gives the following error: XMLHttpRequest cannot load http://www.backenddomain.com/uploadhandler. Origin http://www.websitedomain.com is not allowed by Access-Control-Allow-Origin. Does anyone know how to stop the browser from checking or how i can tell my server to just accept the POST?

Read the article

How to save image drawn on a JPanel?

- by swift

I have a panel with transparent background which i use to draw an image. now problem here is when i draw anything on panel and save the image as a JPEG file its saving the image with black background but i want it to be saved as same, as i draw on the panel. what should be done for this? plz guide me j Client.java public class Client extends Thread { static DatagramSocket datasocket; static DatagramSocket socket; Point point; Whiteboard board; Virtualboard virtualboard; JLayeredPane layerpane; BufferedImage image; public Client(DatagramSocket datasocket) { Client.datasocket=datasocket; } //This function is responsible to connect to the server public static void connect() { try { socket=new DatagramSocket (9000); //client connection socket port= 9000 datasocket=new DatagramSocket (9005); //client data socket port= 9002 ByteArrayOutputStream baos=new ByteArrayOutputStream(); DataOutputStream dos=new DataOutputStream(baos); //this is to tell server that this is a connection request dos.writeChar('c'); dos.close(); byte[]data=baos.toByteArray(); //Server IP address InetAddress ip=InetAddress.getByName("10.123.97.154"); //create the UDP packet DatagramPacket packet=new DatagramPacket(data, data.length,ip , 8000); socket.send(packet); Client client=new Client(datasocket); client.createFrame(); client.run(); } catch(Exception e) { e.printStackTrace(); } } //This function is to create the JFrame public void createFrame() { JFrame frame=new JFrame("Whiteboard"); frame.setVisible(true); frame.setBackground(Color.black); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setSize(680,501); frame.addWindowListener(new WindowAdapter() { public void windowOpened(WindowEvent e) {} public void windowClosing(WindowEvent e) { close(); } }); layerpane=frame.getLayeredPane(); board= new Whiteboard(datasocket); image = new BufferedImage(590,463, BufferedImage.TYPE_INT_ARGB); board.setBounds(74,2,590,463); board.setImage(image); virtualboard=new Virtualboard(); virtualboard.setImage(image); virtualboard.setBounds(74,2,590,463); layerpane.add(virtualboard,new Integer(2));//Panel where remote user draws layerpane.add(board,new Integer(3)); layerpane.add(board.colourButtons(),new Integer(1)); layerpane.add(board.shapeButtons(),new Integer(0)); //frame.add(paper.addButtons(),BorderLayout.WEST); } /* * This function is overridden from the thread class * This function listens for incoming packets from the server * which contains the points drawn by the other client */ public void run () { while (true) { try { byte[] buffer = new byte[512]; DatagramPacket packet = new DatagramPacket(buffer, buffer.length); datasocket.receive(packet); InputStream in=new ByteArrayInputStream(packet.getData(), packet.getOffset(),packet.getLength()); DataInputStream din=new DataInputStream(in); int x=din.readInt(); int y=din.readInt(); String varname=din.readLine(); String var[]=varname.split("-",4); point=new Point(x,y); virtualboard.addPoint(point, var[0], var[1],var[2],var[3]); } catch (IOException ex) { ex.printStackTrace(); } } } //This function is to broadcast the newly drawn point to the server public void broadcast (Point p,String varname,String shape,String event, String color) { try { ByteArrayOutputStream baos=new ByteArrayOutputStream(); DataOutputStream dos=new DataOutputStream(baos); dos.writeInt(p.x); dos.writeInt(p.y); dos.writeBytes(varname); dos.writeBytes("-"); dos.writeBytes(shape); dos.writeBytes("-"); dos.writeBytes(event); dos.writeBytes("-"); dos.writeBytes(color); dos.close(); byte[]data=baos.toByteArray(); InetAddress ip=InetAddress.getByName("10.123.97.154"); DatagramPacket packet=new DatagramPacket(data, data.length,ip , 8002); datasocket.send(packet); } catch (Exception e) { e.printStackTrace(); } } //This function is to close the client's connection with the server public void close() { try { ByteArrayOutputStream baos=new ByteArrayOutputStream(); DataOutputStream dos=new DataOutputStream(baos); //This is to tell server that this is request to remove the client dos.writeChar('r'); dos.close(); byte[]data=baos.toByteArray(); //Server IP address InetAddress ip=InetAddress.getByName("10.123.97.154"); DatagramPacket packet=new DatagramPacket(data, data.length,ip , 8000); socket.send(packet); System.out.println("closed"); } catch(Exception e) { e.printStackTrace(); } } public static void main(String[] args) throws Exception { connect(); } } Whiteboard.java class Whiteboard extends JPanel implements MouseListener,MouseMotionListener,ActionListener,KeyListener { BufferedImage image; Boolean tooltip=false; int post; String shape; String selectedcolor="black"; Color color=Color.black; //Color color=Color.white; Point start; Point end; Point mp; Point tip; int keycode; String fillshape; Point fillstart=new Point(); Point fillend=new Point(); int noofside; Button r=new Button("rect"); Button rectangle=new Button("rect"); Button line=new Button("line"); Button roundrect=new Button("roundrect"); Button polygon=new Button("poly"); Button text=new Button("text"); JButton save=new JButton("Save"); Button elipse=new Button("elipse"); ImageIcon fillicon=new ImageIcon("images/fill.jpg"); JButton fill=new JButton(fillicon); ImageIcon erasericon=new ImageIcon("images/eraser.gif"); JButton erase=new JButton(erasericon); JButton[] colourbutton=new JButton[28]; String selected; Point label; String key=""; int ex,ey;//eraser DatagramSocket dataSocket; JButton button = new JButton("test"); Client client; Boolean first; int w,h; public Whiteboard(DatagramSocket dataSocket) { try { UIManager.setLookAndFeel( UIManager.getCrossPlatformLookAndFeelClassName()); } catch (Exception e) { e.printStackTrace(); } setLayout(null); setOpaque(false); setBackground(new Color(237,237,237)); this.dataSocket=dataSocket; client=new Client(dataSocket); addKeyListener(this); addMouseListener(this); addMouseMotionListener(this); setBorder(BorderFactory.createLineBorder(Color.black)); } public void paintComponent(Graphics g) { try { super.paintComponent(g); g.drawImage(image, 0, 0, this); Graphics2D g2 = (Graphics2D)g; if(color!=null) g2.setPaint(color); if(start!=null && end!=null) { if(selected==("elipse")) g2.drawOval(start.x, start.y,(end.x-start.x),(end.y-start.y)); else if(selected==("rect")) g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("line")) g2.drawLine(start.x,start.y,end.x,end.y); else if(selected==("poly")) { g2.drawLine(start.x,start.y,end.x,end.y); client.broadcast(start, "start", "poly", "drag", selectedcolor); client.broadcast(end, "end", "poly", "drag", selectedcolor); } } if(tooltip==true) { System.out.println(selected); if(selected=="text") { g2.drawString("|", tip.x, tip.y-5); g2.drawString("Click to add text", tip.x+10, tip.y+23); g2.drawString("__", label.x+post, label.y); } if(selected=="erase") { g2.setPaint(new Color(237,237,237)); g2.fillRect(tip.x-10,tip.y-10,10,10); g2.setPaint(color); g2.drawRect(tip.x-10,tip.y-10,10,10); } } } catch(Exception e) {} } //Function to draw the shape on image public void draw() { Graphics2D g2 = (Graphics2D) image.createGraphics(); Font font=new Font("Times New Roman",Font.PLAIN,14); g2.setFont(font); g2.setPaint(color); if(start!=null && end!=null) { if(selected=="line") g2.drawLine(start.x, start.y, end.x, end.y); else if(selected=="elipse") g2.drawOval(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected=="rect") g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("poly")) { g2.drawLine(start.x,start.y,end.x,end.y); client.broadcast(start, "start", "poly", "release", selectedcolor); client.broadcast(end, "end", "poly", "release", selectedcolor); } fillstart=start; fillend=end; fillshape=selected; } if(selected!="poly") { start=null; end=null; } if(label!=null) { if(selected==("text")) { g2.drawString(key,label.x,label.y); client.broadcast(label, key, "text", "release", selectedcolor); } } repaint(); g2.dispose(); } //Function which provides the erase functionality public void erase() { Graphics2D pic=(Graphics2D) image.createGraphics(); Color erasecolor=new Color(237,237,237); pic.setPaint(erasecolor); if(start!=null) pic.fillRect(start.x-10, start.y-10, 10, 10); } //To set the size of the image public void setImage(BufferedImage image) { this.image = image; } //Function to add buttons into the panel, calling this function returns a panel public JPanel shapeButtons() { JPanel shape=new JPanel(); shape.setBackground(new Color(181, 197, 210)); shape.setLayout(new GridLayout(5,2,2,4)); shape.setBounds(0, 2, 74, 166); rectangle.addActionListener(this); rectangle.setToolTipText("Rectangle"); line.addActionListener( this); line.setToolTipText("Line"); erase.addActionListener(this); erase.setToolTipText("Eraser"); roundrect.addActionListener(this); roundrect.setToolTipText("Round edge Rectangle"); polygon.addActionListener(this); polygon.setToolTipText("Polygon"); text.addActionListener(this); text.setToolTipText("Text"); fill.addActionListener(this); fill.setToolTipText("Fill with colour"); elipse.addActionListener(this); elipse.setToolTipText("Elipse"); save.addActionListener(this); shape.add(elipse); shape.add(rectangle); shape.add(roundrect); shape.add(polygon); shape.add(line); shape.add(text); shape.add(fill); shape.add(erase); shape.add(save); return shape; } public JPanel colourButtons() { JPanel colourbox=new JPanel(); colourbox.setBackground(new Color(181, 197, 210)); colourbox.setLayout(new GridLayout(8,2,8,8)); colourbox.setBounds(0,323,70,140); //colourbox.add(empty); for(int i=0;i<16;i++) { colourbutton[i]=new JButton(); colourbox.add(colourbutton[i]); if(i==0) colourbutton[0].setBackground(Color.black); else if(i==1) colourbutton[1].setBackground(Color.white); else if(i==2) colourbutton[2].setBackground(Color.red); else if(i==3) colourbutton[3].setBackground(Color.orange); else if(i==4) colourbutton[4].setBackground(Color.blue); else if(i==5) colourbutton[5].setBackground(Color.green); else if(i==6) colourbutton[6].setBackground(Color.pink); else if(i==7) colourbutton[7].setBackground(Color.magenta); else if(i==8) colourbutton[8].setBackground(Color.cyan); else if(i==9) colourbutton[9].setBackground(Color.black); else if(i==10) colourbutton[10].setBackground(Color.yellow); else if(i==11) colourbutton[11].setBackground(new Color(131,168,43)); else if(i==12) colourbutton[12].setBackground(new Color(132,0,210)); else if(i==13) colourbutton[13].setBackground(new Color(193,17,92)); else if(i==14) colourbutton[14].setBackground(new Color(129,82,50)); else if(i==15) colourbutton[15].setBackground(new Color(64,128,128)); colourbutton[i].addActionListener(this); } return colourbox; } public void fill() { if(selected=="fill") { Graphics2D g2 = (Graphics2D) image.getGraphics(); g2.setPaint(color); System.out.println("Fill"); if(fillshape=="elipse") g2.fillOval(fillstart.x, fillstart.y, (fillend.x-fillstart.x),(fillend.y-fillstart.y)); else if(fillshape=="rect") g2.fillRect(fillstart.x, fillstart.y, (fillend.x-fillstart.x),(fillend.y-fillstart.y)); else if(fillshape==("rrect")) g2.fillRoundRect(fillstart.x, fillstart.y, (fillend.x-fillstart.x),(fillend.y-fillstart.y),11,11); // else if(fillshape==("poly")) // g2.drawPolygon(x,y,2); } repaint(); } //To save the image drawn public void save() { try { ByteArrayOutputStream bos = new ByteArrayOutputStream(); JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(bos); JFileChooser fc = new JFileChooser(); fc.showSaveDialog(this); encoder.encode(image); byte[] jpgData = bos.toByteArray(); FileOutputStream fos = new FileOutputStream(fc.getSelectedFile()+".jpeg"); fos.write(jpgData); fos.close(); //add replce confirmation here } catch (IOException e) { System.out.println(e); } } public void mouseClicked(MouseEvent e) { } @Override public void mouseEntered(MouseEvent e) { } public void mouseExited(MouseEvent arg0) { } public void mousePressed(MouseEvent e) { if(selected=="line"||selected=="text") { start=e.getPoint(); client.broadcast(start,"start", selected,"press", selectedcolor); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") mp = e.getPoint(); else if(selected=="poly") { if(first==true) { start=e.getPoint(); //client.broadcast(start,"start", selected,"press", selectedcolor); } else if(first==false) { end=e.getPoint(); repaint(); //client.broadcast(end,"end", selected,"press", selectedcolor); } } else if(selected=="erase") { start=e.getPoint(); erase(); } } public void mouseReleased(MouseEvent e) { if(selected=="text") { System.out.println("Reset"); key=""; post=0; label=new Point(); label=e.getPoint(); grabFocus(); } if(start!=null && end!=null) { if(selected=="line") { end=e.getPoint(); client.broadcast(end,"end", selected,"release", selectedcolor); draw(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); client.broadcast(end,"end", selected,"release", selectedcolor); draw(); } else if(selected=="poly") { draw(); first=false; start=end; end=null; } } } public void mouseDragged(MouseEvent e) { if(end==null) end = new Point(); if(start==null) start = new Point(); if(selected=="line") { end=e.getPoint(); client.broadcast(end,"end", selected,"drag", selectedcolor); } else if(selected=="erase") { start=e.getPoint(); erase(); client.broadcast(start,"start", selected,"drag", selectedcolor); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { start.x = Math.min(mp.x,e.getX()); start.y = Math.min(mp.y,e.getY()); end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); client.broadcast(start,"start", selected,"drag", selectedcolor); client.broadcast(end,"end", selected,"drag", selectedcolor); } else if(selected=="poly") end=e.getPoint(); System.out.println(tooltip); if(tooltip==true) { if(selected=="erase") { Graphics2D g2=(Graphics2D) getGraphics(); tip=e.getPoint(); g2.drawRect(tip.x-10,tip.y-10,10,10); } } repaint(); } public void mouseMoved(MouseEvent e) { if(selected=="text" ||selected=="erase") { tip=new Point(); tip=e.getPoint(); tooltip=true; repaint(); } } public void actionPerformed(ActionEvent e) { if(e.getSource()==elipse) selected="elipse"; else if(e.getSource()==line) selected="line"; else if(e.getSource()==rectangle) selected="rect"; else if(e.getSource()==erase) { selected="erase"; tooltip=true; System.out.println(selected); erase(); } else if(e.getSource()==roundrect) selected="rrect"; else if(e.getSource()==polygon) { selected="poly"; first=true; start=null; } else if(e.getSource()==text) { selected="text"; tooltip=true; } else if(e.getSource()==fill) { selected="fill"; fill(); } else if(e.getSource()==save) save(); if(e.getSource()==colourbutton[0]) { color=Color.black; selectedcolor="black"; } else if(e.getSource()==colourbutton[1]) { color=Color.white; selectedcolor="white"; } else if(e.getSource()==colourbutton[2]) { color=Color.red; selectedcolor="red"; } else if(e.getSource()==colourbutton[3]) { color=Color.orange; selectedcolor="orange"; } else if(e.getSource()==colourbutton[4]) { selectedcolor="blue"; color=Color.blue; } else if(e.getSource()==colourbutton[5]) { selectedcolor="green"; color=Color.green; } else if(e.getSource()==colourbutton[6]) { selectedcolor="pink"; color=Color.pink; } else if(e.getSource()==colourbutton[7]) { selectedcolor="magenta"; color=Color.magenta; } else if(e.getSource()==colourbutton[8]) { selectedcolor="cyan"; color=Color.cyan; } } @Override public void keyPressed(KeyEvent e) { //System.out.println(e.getKeyChar()+" : "+e.getKeyCode()); if(label!=null) { if(e.getKeyCode()==10) //Check for Enter key { label.y=label.y+14; key=""; post=0; repaint(); } else if(e.getKeyCode()==8) //Backspace { try{ Graphics2D g2 = (Graphics2D) image.getGraphics(); g2.setPaint(new Color(237,237,237)); g2.fillRect(label.x+post-7, label.y-13, 14, 17); if(post>0) post=post-6; keycode=0; key=key.substring(0, key.length()-1); System.out.println(key.substring(0, key.length())); repaint(); Point broadcastlabel=new Point(); broadcastlabel.x=label.x+post-7; broadcastlabel.y=label.y-13; client.broadcast(broadcastlabel, key, "text", "backspace", selectedcolor); } catch(Exception ex) {} } //Block invalid keys else if(!(e.getKeyCode()>=16 && e.getKeyCode()<=20 || e.getKeyCode()>=112 && e.getKeyCode()<=123 || e.getKeyCode()>=33 && e.getKeyCode()<=40 || e.getKeyCode()>=144 && e.getKeyCode()<=145 || e.getKeyCode()>=524 && e.getKeyCode()<=525 ||e.getKeyCode()==27||e.getKeyCode()==155 ||e.getKeyCode()==127)) { key=key+e.getKeyChar(); post=post+6; draw(); } } } @Override public void keyReleased(KeyEvent e) { } @Override public void keyTyped(KeyEvent e) { } } class Button extends JButton { String name; int i; public Button(String name) { this.name=name; try { UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel"); } catch (Exception e) { e.printStackTrace(); } } public Button(int i) { this.i=i; } public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2 = (Graphics2D)g; g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON); //g2.setStroke(new BasicStroke(1.2f)); if (name == "line") g.drawLine(5,5,30,30); if (name == "elipse") g.drawOval(5,7,25,20); if (name== "rect") g.drawRect(5,5,25,23); if (name== "roundrect") g.drawRoundRect(5,5,25,23,10,10); int a[]=new int[]{20,9,20,23,20}; int b[]=new int[]{9,23,25,20,9}; if (name== "poly") g.drawPolyline(a, b, 5); if (name== "text") g.drawString("Text",8, 24); } }

Read the article

pyqt QObject: Cannot create children for a parent that is in a different thread

- by memomk

QObject: Cannot create children for a parent that is in a different thread. (Parent is QTextDocument(0x9919018), parent's thread is QThread(0x97331e0), current thread is flooderthread(0x97b4c10) error means ? am sorry because am new to pyqt here is the code : i know the code is finished yet but it should work i guess the problem is with myfun.log function... #! /usr/bin/python # -*- coding: utf-8 -*- import urllib, urllib2, itertools, threading, cookielib, Cookie, sys, time, hashlib, os from PyQt4 import QtCore, QtGui try: _fromUtf8 = QtCore.QString.fromUtf8 except AttributeError: _fromUtf8 = lambda s: s gui=QtGui.QApplication.processEvents texttoset="" class fun(): global texttoset def checkpassword(self): if ui.passwordcheck.isChecked()==True: return 1 else : return 0 def log(self, text): if text != False: firsttext=str(ui.console.toPlainText()) secondtext=firsttext+text+"\n" ui.console.setText(secondtext) log=open("log.log", "a") log.write(text+"\n") log.close() else : firsttext=str(ui.console.toPlainText()) secondtext=firsttext+texttoset+"\n" ui.console.setText(secondtext) log=open("log.log", "a") log.write(texttoset+"\n") log.close() def disable(self): MainWindow.setEnabled(False) pass def enable(self): MainWindow.setEnabled(True) pass def checkmethod(self): if ui.get.isChecked()==True: return 1 elif ui.post.isChecked()==True: return 2 else : return 0 def main(self): connecter() gui() f1.start() gui() time.sleep(3) gui() f2.start() gui() time.sleep(3) gui() f3.start() gui() time.sleep(3) gui() f4.start() gui() time.sleep(3) gui() f5.start() gui() self.sleep(3) gui() f6.start() gui() def killer(self): f1.terminate() f2.terminate() f3.terminate() f4.terminate() f5.terminate() f6.terminate() def close(self): self.killer() os.abort() sys.exit() myfun=fun() def connecter(): QtCore.QObject.connect(f1, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f1, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f1, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f2, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f2, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f2, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f3, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f3, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f3, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f4, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f4, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f4, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f5, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f5, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f5, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f6, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f6, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f6, QtCore.SIGNAL("disable()"), myfun.disable) x=0 num=0 class flooderthread(QtCore.QThread): global texttoset def __init__(self, x, num): QtCore.QThread.__init__(self) self.x=x self.num=num def log(self, text): texttolog=str(text) time.sleep(1) self.emit(QtCore.SIGNAL("log(bool)"), False) time.sleep(2) def enable(self): time.sleep(1) self.emit(QtCore.SIGNAL("enable()")) def disable(self): time.sleep(1) self.emit(QtCore.SIGNAL("disable()")) def run(self): connecter() self.log("\n\n--------------------------------------------------new session-------------------------------------\n\n") itered=False gui() self.disable() gui() self.log("setting params...") param={ui.dataname1.text():ui.datavalue1.text(),ui.dataname3.text():ui.datavalue3.text(),ui.dataname3.text():ui.datavalue3.text(), } self.log("checking password...") if myfun.checkpassword()==1: itered=True self.log("password is true") else : self.log("password is null ") self.log("itered operation") self.log("setting url") url=str(ui.url.text()) if url[:4]!="http" and url[:3]!="ftp": self.log("url error exiting the whole function") self.log("please set a valide protocole!!") gui() self.enable() gui() return 1 pass else : self.log("valid url") gui() self.log("url is "+url) self.log("setting proxy") proxy="http://"+ui.proxyuser.text()+":"+ui.proxypass.text()+"@"+ui.proxyhost.text()+":"+ui.proxyport.text() self.log("proxy is "+proxy) gui() self.log("preparing params...") urlparam=urllib.urlencode(param) gui() self.log("params are "+urlparam) self.log("setting up headers...") header={'User-Agent':str(ui.useragent.toPlainText())} self.log("headers are "+ str(header)) self.log("setting up proxy handler..") proxyhandler=urllib2.ProxyHandler({"http":str(proxy)}) self.log("checking method") if myfun.checkmethod()==1: self.log("method is get..") self.log("setting request..") finalurl=url+urlparam gui() self.log("final url is"+finalurl) req=urllib2.Request(finalurl, None, headers) elif myfun.checkmethod()==2: self.log("method is post...") self.log("setting request..") finalurl=url gui() self.log("final url is "+finalurl) req=urllib2.Request(finalurl, urlparam, header) else : self.log("error has been accourded") self.log("please select a method!!") gui() self.log("exiting the whole functions") gui() self.enable() return 1 pass self.log("intilizing cookies..") c1=Cookie.SimpleCookie() c1[str(ui.cookiename1.text())]=str(ui.cookievalue1.text()) c1[str(ui.cookiename1.text())]['path']='/' c1[str(ui.cookiename2.text())]=str(ui.cookievalue2.text()) c1[str(ui.cookiename2.text())]['path']='/' c1[str(ui.cookiename3.text())]=str(ui.cookievalue3.text()) c1[str(ui.cookiename3.text())]['domain']=url c1[str(ui.cookiename3.text())]['path']='/' c1[str(ui.cookiename4.text())]=str(ui.cookievalue4.text()) c1[str(ui.cookiename4.text())]['domain']=url c1[str(ui.cookiename4.text())]['path']='/' self.log("cookies are.. :"+str(c1)) cj=cookielib.CookieJar() cj.set_cookie(c1) opener = urllib2.build_opener(proxyhandler, urllib2.HTTPCookieProcessor(cj)) self.log("insatlling opener") urllib2.install_opener(opener) self.log("setting the two operations....") if itered==Fasle: self.log("starting the flooding loop") gui() while true: try: gui() opener.open(req) except e: self.log("error connecting : "+e.reason) self.log("will continue....") continue gui() elif itered==True: pass f1=flooderthread(1, 1) f2=flooderthread(2, 2) f3=flooderthread(3, 3) f4=flooderthread(4, 4) f5=flooderthread(5, 5) f6=flooderthread(6, 6) class Ui_MainWindow(object): def setupUi(self, MainWindow): MainWindow.setObjectName(_fromUtf8("MainWindow")) MainWindow.setMinimumSize(QtCore.QSize(838, 500)) MainWindow.setMaximumSize(QtCore.QSize(838, 500)) MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "memo flooder", None, QtGui.QApplication.UnicodeUTF8)) self.centralwidget = QtGui.QWidget(MainWindow) self.centralwidget.setObjectName(_fromUtf8("centralwidget")) self.console=QtGui.QTextEdit(self.centralwidget) self.console.setGeometry(10, 350, 800,130) self.console.setReadOnly(True) self.console.setObjectName("console") self.groupBox = QtGui.QGroupBox(self.centralwidget) self.groupBox.setGeometry(QtCore.QRect(30, 50, 71, 80)) self.groupBox.setTitle(QtGui.QApplication.translate("MainWindow", "method:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox.setObjectName(_fromUtf8("groupBox")) self.post = QtGui.QRadioButton(self.groupBox) self.post.setGeometry(QtCore.QRect(10, 20, 61, 22)) self.post.setText(QtGui.QApplication.translate("MainWindow", "post", None, QtGui.QApplication.UnicodeUTF8)) self.post.setChecked(True) self.post.setObjectName(_fromUtf8("post")) self.get = QtGui.QRadioButton(self.groupBox) self.get.setGeometry(QtCore.QRect(10, 50, 51, 22)) self.get.setText(QtGui.QApplication.translate("MainWindow", "get", None, QtGui.QApplication.UnicodeUTF8)) self.get.setObjectName(_fromUtf8("get")) self.url = QtGui.QLineEdit(self.centralwidget) self.url.setGeometry(QtCore.QRect(70, 20, 671, 27)) self.url.setInputMethodHints(QtCore.Qt.ImhUrlCharactersOnly) self.url.setObjectName(_fromUtf8("url")) self.groupBox_2 = QtGui.QGroupBox(self.centralwidget) self.groupBox_2.setGeometry(QtCore.QRect(110, 50, 371, 111)) self.groupBox_2.setTitle(QtGui.QApplication.translate("MainWindow", "data:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_2.setObjectName(_fromUtf8("groupBox_2")) self.dataname1 = QtGui.QLineEdit(self.groupBox_2) self.dataname1.setGeometry(QtCore.QRect(20, 30, 101, 27)) self.dataname1.setObjectName(_fromUtf8("dataname1")) self.label = QtGui.QLabel(self.groupBox_2) self.label.setGeometry(QtCore.QRect(40, 10, 67, 17)) self.label.setText(QtGui.QApplication.translate("MainWindow", "name:", None, QtGui.QApplication.UnicodeUTF8)) self.label.setObjectName(_fromUtf8("label")) self.dataname2 = QtGui.QLineEdit(self.groupBox_2) self.dataname2.setGeometry(QtCore.QRect(130, 30, 113, 27)) self.dataname2.setObjectName(_fromUtf8("dataname2")) self.dataname3 = QtGui.QLineEdit(self.groupBox_2) self.dataname3.setGeometry(QtCore.QRect(250, 30, 113, 27)) self.dataname3.setObjectName(_fromUtf8("dataname3")) self.label_2 = QtGui.QLabel(self.groupBox_2) self.label_2.setGeometry(QtCore.QRect(40, 60, 67, 17)) self.label_2.setText(QtGui.QApplication.translate("MainWindow", "value:", None, QtGui.QApplication.UnicodeUTF8)) self.label_2.setObjectName(_fromUtf8("label_2")) self.datavalue1 = QtGui.QLineEdit(self.groupBox_2) self.datavalue1.setGeometry(QtCore.QRect(20, 80, 101, 27)) self.datavalue1.setObjectName(_fromUtf8("datavalue1")) self.datavalue2 = QtGui.QLineEdit(self.groupBox_2) self.datavalue2.setGeometry(QtCore.QRect(130, 80, 113, 27)) self.datavalue2.setObjectName(_fromUtf8("datavalue2")) self.datavalue3 = QtGui.QLineEdit(self.groupBox_2) self.datavalue3.setGeometry(QtCore.QRect(250, 80, 113, 27)) self.datavalue3.setObjectName(_fromUtf8("datavalue3")) self.groupBox_4 = QtGui.QGroupBox(self.centralwidget) self.groupBox_4.setGeometry(QtCore.QRect(670, 50, 151, 111)) self.groupBox_4.setTitle(QtGui.QApplication.translate("MainWindow", "password:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_4.setObjectName(_fromUtf8("groupBox_4")) self.passname = QtGui.QLineEdit(self.groupBox_4) self.passname.setGeometry(QtCore.QRect(10, 30, 113, 27)) self.passname.setObjectName(_fromUtf8("passname")) self.passvalue = QtGui.QLineEdit(self.groupBox_4) self.passvalue.setGeometry(QtCore.QRect(10, 80, 113, 27)) self.passvalue.setObjectName(_fromUtf8("passvalue")) self.passwordcheck = QtGui.QCheckBox(self.centralwidget) self.passwordcheck.setGeometry(QtCore.QRect(670, 180, 97, 22)) self.passwordcheck.setText(QtGui.QApplication.translate("MainWindow", "password", None, QtGui.QApplication.UnicodeUTF8)) self.passwordcheck.setChecked(True) self.passwordcheck.setObjectName(_fromUtf8("passwordcheck")) self.groupBox_5 = QtGui.QGroupBox(self.centralwidget) self.groupBox_5.setGeometry(QtCore.QRect(29, 169, 441, 81)) self.groupBox_5.setTitle(QtGui.QApplication.translate("MainWindow", "proxy:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_5.setObjectName(_fromUtf8("groupBox_5")) self.proxyhost = QtGui.QLineEdit(self.groupBox_5) self.proxyhost.setGeometry(QtCore.QRect(20, 30, 113, 27)) self.proxyhost.setObjectName(_fromUtf8("proxyhost")) self.proxyport = QtGui.QLineEdit(self.groupBox_5) self.proxyport.setGeometry(QtCore.QRect(140, 30, 51, 27)) self.proxyport.setInputMethodHints(QtCore.Qt.ImhDigitsOnly|QtCore.Qt.ImhPreferNumbers) self.proxyport.setObjectName(_fromUtf8("proxyport")) self.proxyuser = QtGui.QLineEdit(self.groupBox_5) self.proxyuser.setGeometry(QtCore.QRect(200, 30, 113, 27)) self.proxyuser.setObjectName(_fromUtf8("proxyuser")) self.proxypass = QtGui.QLineEdit(self.groupBox_5) self.proxypass.setGeometry(QtCore.QRect(320, 30, 113, 27)) self.proxypass.setObjectName(_fromUtf8("proxypass")) self.label_4 = QtGui.QLabel(self.groupBox_5) self.label_4.setGeometry(QtCore.QRect(100, 10, 67, 17)) self.label_4.setText(QtGui.QApplication.translate("MainWindow", "host", None, QtGui.QApplication.UnicodeUTF8)) self.label_4.setObjectName(_fromUtf8("label_4")) self.label_5 = QtGui.QLabel(self.groupBox_5) self.label_5.setGeometry(QtCore.QRect(150, 10, 67, 17)) self.label_5.setText(QtGui.QApplication.translate("MainWindow", "port", None, QtGui.QApplication.UnicodeUTF8)) self.label_5.setObjectName(_fromUtf8("label_5")) self.label_6 = QtGui.QLabel(self.groupBox_5) self.label_6.setGeometry(QtCore.QRect(200, 10, 67, 17)) self.label_6.setText(QtGui.QApplication.translate("MainWindow", "username", None, QtGui.QApplication.UnicodeUTF8)) self.label_6.setObjectName(_fromUtf8("label_6")) self.label_7 = QtGui.QLabel(self.groupBox_5) self.label_7.setGeometry(QtCore.QRect(320, 10, 67, 17)) self.label_7.setText(QtGui.QApplication.translate("MainWindow", "password", None, QtGui.QApplication.UnicodeUTF8)) self.label_7.setObjectName(_fromUtf8("label_7")) self.groupBox_6 = QtGui.QGroupBox(self.centralwidget) self.groupBox_6.setGeometry(QtCore.QRect(30, 260, 531, 91)) self.groupBox_6.setTitle(QtGui.QApplication.translate("MainWindow", "cookies:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_6.setObjectName(_fromUtf8("groupBox_6")) self.cookiename1 = QtGui.QLineEdit(self.groupBox_6) self.cookiename1.setGeometry(QtCore.QRect(10, 20, 113, 27)) self.cookiename1.setObjectName(_fromUtf8("cookiename1")) self.cookiename2 = QtGui.QLineEdit(self.groupBox_6) self.cookiename2.setGeometry(QtCore.QRect(140, 20, 113, 27)) self.cookiename2.setObjectName(_fromUtf8("cookename2")) self.cookiename3 = QtGui.QLineEdit(self.groupBox_6) self.cookiename3.setGeometry(QtCore.QRect(270, 20, 113, 27)) self.cookiename3.setObjectName(_fromUtf8("cookiename3")) self.cookiename4 = QtGui.QLineEdit(self.groupBox_6) self.cookiename4.setGeometry(QtCore.QRect(390, 20, 113, 27)) self.cookiename4.setObjectName(_fromUtf8("cookiename4")) self.cookievalue1 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue1.setGeometry(QtCore.QRect(10, 50, 113, 27)) self.cookievalue1.setObjectName(_fromUtf8("cookievalue1")) self.cookievalue2 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue2.setGeometry(QtCore.QRect(140, 50, 113, 27)) self.cookievalue2.setObjectName(_fromUtf8("cookievalue2")) self.cookievalue3 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue3.setGeometry(QtCore.QRect(270, 50, 113, 27)) self.cookievalue3.setObjectName(_fromUtf8("cookievalue3")) self.cookievalue4 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue4.setGeometry(QtCore.QRect(390, 50, 113, 27)) self.cookievalue4.setObjectName(_fromUtf8("cookievalue4")) self.groupBox_7 = QtGui.QGroupBox(self.centralwidget) self.groupBox_7.setGeometry(QtCore.QRect(570, 260, 251, 80)) self.groupBox_7.setTitle(QtGui.QApplication.translate("MainWindow", "useragents:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_7.setObjectName(_fromUtf8("groupBox_7")) self.useragent = QtGui.QTextEdit(self.groupBox_7) self.useragent.setGeometry(QtCore.QRect(10, 20, 211, 51)) self.useragent.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAlwaysOn) self.useragent.setObjectName(_fromUtf8("useragent")) self.start = QtGui.QPushButton(self.centralwidget) self.start.setGeometry(QtCore.QRect(750, 20, 71, 27)) self.start.setText(QtGui.QApplication.translate("MainWindow", "start", None, QtGui.QApplication.UnicodeUTF8)) self.start.setObjectName(_fromUtf8("start")) self.label_3 = QtGui.QLabel(self.centralwidget) self.label_3.setGeometry(QtCore.QRect(30, 20, 67, 17)) self.label_3.setText(QtGui.QApplication.translate("MainWindow", "url :", None, QtGui.QApplication.UnicodeUTF8)) self.label_3.setObjectName(_fromUtf8("label_3")) MainWindow.setCentralWidget(self.centralwidget) QtCore.QObject.connect(self.start, QtCore.SIGNAL(_fromUtf8("clicked(bool)")), myfun.main) QtCore.QObject.connect(self.passwordcheck, QtCore.SIGNAL(_fromUtf8("clicked(bool)")), self.groupBox_4.setEnabled) QtCore.QMetaObject.connectSlotsByName(MainWindow) def __del__(): myfun.killer() os.abort() sys.exit() app = QtGui.QApplication(sys.argv) MainWindow = QtGui.QMainWindow() ui = Ui_MainWindow() ui.setupUi(MainWindow) myfun.log("\n\n--------------------------------------------------new session-------------------------------------\n\n") MainWindow.show() sys.exit(app.exec_())

Read the article

Receive MMS images and make album using iamge using j2me

- by Abdul Basit

I am trying to made application which receive MMS images and make a album from them user can view the pictures while running this application. I am facing problem while running application on mobile. while this application is fully working in wireless tookit emulator. Please guide me to fix this problem.`//package hello; import javax.microedition.midlet.; import javax.microedition.lcdui.; import javax.wireless.messaging.*; import java.io.IOException; import java.util.Vector; import javax.microedition.io.Connector; import javax.microedition.lcdui.Display; //, ItemStateListener public class MMSS extends MIDlet implements CommandListener, Runnable, MessageListener { //-----------------------------------Receive MMS --------------------------- private Thread mReceiver = null; private boolean mEndNow = false; private Message msg = null; String msgReceived = null; private Image[] receivedImage = new Image[5]; private Command mExitCommand = new Command("Exit", Command.EXIT, 2); private Command mRedCommand = new Command("Back", Command.SCREEN, 1); private Command mBlueCommand = new Command("Next", Command.SCREEN, 1); private Command mPlay = new Command("Play", Command.SCREEN, 1); protected static final String DEFAULT_IMAGE = "/MMSS_logo.jpg"; //protected static final String DEFAULT_IMAGE = "/wait.png"; private Display mDisplay = null; //protected ImageItem mColorSquare = null; protected Image mInitialImage = null; private String mAppID = "MMSMIDlet"; private TextField imageName = null; //private Form mForm = null; private int count = 0; private int next = 0; private Integer mMonitor = new Integer(0); //----------------------------------- End Receive MMS --------------------------- private boolean midletPaused = false; private Command exitCommand; private Command exitCommand1; private Command backCommand; private Form form; private StringItem stringItem; private ImageItem imageItem; private Image image1; private Alert alert; private List locationList; private Alert cannotAddLocationAlert; public MMSS() { } /** * Initilizes the application. * It is called only once when the MIDlet is started. The method is called before the startMIDlet method. */ private void initialize() { } /** * Performs an action assigned to the Mobile Device - MIDlet Started point. */ public void startMIDlet() { // write pre-action user code here switchDisplayable(null, getForm()); // write post-action user code here } /** * Performs an action assigned to the Mobile Device - MIDlet Resumed point. */ public void resumeMIDlet() { } /** * Switches a current displayable in a display. The display instance is taken from getDisplay method. This method is used by all actions in the design for switching displayable. * @param alert the Alert which is temporarily set to the display; if null, then nextDisplayable is set immediately * @param nextDisplayable the Displayable to be set / public void switchDisplayable(Alert alert, Displayable nextDisplayable) {//GEN-END:|5-switchDisplayable|0|5-preSwitch // write pre-switch user code here Display display = getDisplay();//GEN-BEGIN:|5-switchDisplayable|1|5-postSwitch if (alert == null) { display.setCurrent(nextDisplayable); } else { display.setCurrent(alert, nextDisplayable); } } /* * Called by a system to indicated that a command has been invoked on a particular displayable. * @param command the Command that was invoked * @param displayable the Displayable where the command was invoked */ public void commandAction(Command command, Displayable displayable) { // write pre-action user code here if (displayable == form) { if (command == exitCommand) { // write pre-action user code here exitMIDlet(); // write post-action user code here } } // write post-action user code here } /** * Returns an initiliazed instance of exitCommand component. * @return the initialized component instance */ public Command getExitCommand() { if (exitCommand == null) { // write pre-init user code here exitCommand = new Command("Exit", Command.EXIT, 0); // write post-init user code here } return exitCommand; } /** * Returns an initiliazed instance of form component. * @return the initialized component instance */ public Form getForm() { if (form == null) { // write pre-init user code here form = new Form("Welcome to MMSS", new Item[] { getStringItem(), getImageItem() }); form.addCommand(getExitCommand()); form.setCommandListener(this); // write post-init user code here } return form; } /** * Returns an initiliazed instance of stringItem component. * @return the initialized component instance */ public StringItem getStringItem() { if (stringItem == null) { // write pre-init user code here stringItem = new StringItem("Hello", "Hello, World!"); // write post-init user code here } return stringItem; } /** * Returns an initiliazed instance of exitCommand1 component. * @return the initialized component instance / public Command getExitCommand1() { if (exitCommand1 == null) { // write pre-init user code here exitCommand1 = new Command("Exit", Command.EXIT, 0); // write post-init user code here } return exitCommand1; } /* * Returns an initiliazed instance of imageItem component. * @return the initialized component instance */ public ImageItem getImageItem() { if (imageItem == null) { // write pre-init user code here imageItem = new ImageItem("imageItem", getImage1(), ImageItem.LAYOUT_CENTER | Item.LAYOUT_TOP | Item.LAYOUT_BOTTOM | Item.LAYOUT_VCENTER | Item.LAYOUT_EXPAND | Item.LAYOUT_VEXPAND, "");//GEN-LINE:|26-getter|1|26-postInit // write post-init user code here } return imageItem; } /** * Returns an initiliazed instance of image1 component. * @return the initialized component instance */ public Image getImage1() { if (image1 == null) { // write pre-init user code here try { image1 = Image.createImage("/B.jpg"); } catch (java.io.IOException e) { e.printStackTrace(); } // write post-init user code here } return image1; } /** * Returns a display instance. * @return the display instance. */ public Display getDisplay () { return Display.getDisplay(this); } /** * Exits MIDlet. */ public void exitMIDlet() { switchDisplayable (null, null); destroyApp(true); notifyDestroyed(); } /** * Called when MIDlet is started. * Checks whether the MIDlet have been already started and initialize/starts or resumes the MIDlet. */ public void startApp() { if (midletPaused) { resumeMIDlet (); } else { initialize (); startMIDlet (); } midletPaused = false; /////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////// try { conn = (MessageConnection) Connector.open("mms://:" + mAppID); conn.setMessageListener(this); } catch (Exception e) { System.out.println("startApp caught: "); e.printStackTrace(); } if (conn != null) { startReceive(); } /////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////// } /** * Called when MIDlet is paused. */ public void pauseApp() { midletPaused = true; mEndNow = true; try { conn.setMessageListener(null); conn.close(); } catch (IOException ex) { System.out.println("pausetApp caught: "); ex.printStackTrace(); } } /** * Called to signal the MIDlet to terminate. * @param unconditional if true, then the MIDlet has to be unconditionally terminated and all resources has to be released. */ public void destroyApp(boolean unconditional) { mEndNow = true; try { conn.close(); } catch (IOException ex) { System.out.println("destroyApp caught: "); ex.printStackTrace(); } } private void startReceive() { mEndNow = false; //---- Start receive thread mReceiver = new Thread(this); mReceiver.start(); } protected MessageConnection conn = null; protected int mMsgAvail = 0; // -------------------- Get Next Images ------------------------------------ private void getMessage() { synchronized(mMonitor) { mMsgAvail++; mMonitor.notify(); } } // -------------------- Display Images Thread ------------------------------ public void notifyIncomingMessage(MessageConnection msgConn) { if (msgConn == conn) getMessage(); } public void itemStateChanged(Item item) { throw new UnsupportedOperationException("Not supported yet."); } class SetImage implements Runnable { private Image img = null; public SetImage(Image inImg) { img = inImg; } public void run() { imageItem.setImage(img); imageName.setString(Integer.toString(count)); } } public void run() { mMsgAvail = 0; while (!mEndNow) { synchronized(mMonitor) { // Enter monitor if (mMsgAvail <= 0) try { mMonitor.wait(); } catch (InterruptedException ex) { } mMsgAvail--; } try { msg = conn.receive(); if (msg instanceof MultipartMessage) { MultipartMessage mpm = (MultipartMessage)msg; MessagePart[] parts = mpm.getMessageParts(); if (parts != null) { for (int i = 0; i < parts.length; i++) { MessagePart mp = parts[i]; byte[] ba = mp.getContent(); receivedImage[count] = Image.createImage(ba, 0, ba.length); } Display.getDisplay(this).callSerially(new SetImage(receivedImage[count])); } } } catch (IOException e) { System.out.println("Receive thread caught: "); e.printStackTrace(); } count++; } // of while } } `

Read the article

Differences Between NHibernate and Entity Framework

- by Ricardo Peres

Introduction NHibernate and Entity Framework are two of the most popular O/RM frameworks on the .NET world. Although they share some functionality, there are some aspects on which they are quite different. This post will describe this differences and will hopefully help you get started with the one you know less. Mind you, this is a personal selection of features to compare, it is by no way an exhaustive list. History First, a bit of history. NHibernate is an open-source project that was first ported from Java’s venerable Hibernate framework, one of the first O/RM frameworks, but nowadays it is not tied to it, for example, it has .NET specific features, and has evolved in different ways from those of its Java counterpart. Current version is 3.3, with 3.4 on the horizon. It currently targets .NET 3.5, but can be used as well in .NET 4, it only makes no use of any of its specific functionality. You can find its home page at NHForge. Entity Framework 1 came out with .NET 3.5 and is now on its second major version, despite being version 4. Code First sits on top of it and but came separately and will also continue to be released out of line with major .NET distributions. It is currently on version 4.3.1 and version 5 will be released together with .NET Framework 4.5. All versions will target the current version of .NET, at the time of their release. Its home location is located at MSDN. Architecture In NHibernate, there is a separation between the Unit of Work and the configuration and model instances. You start off by creating a Configuration object, where you specify all global NHibernate settings such as the database and dialect to use, the batch sizes, the mappings, etc, then you build an ISessionFactory from it. The ISessionFactory holds model and metadata that is tied to a particular database and to the settings that came from the Configuration object, and, there will typically be only one instance of each in a process. Finally, you create instances of ISession from the ISessionFactory, which is the NHibernate representation of the Unit of Work and Identity Map. This is a lightweight object, it basically opens and closes a database connection as required and keeps track of the entities associated with it. ISession objects are cheap to create and dispose, because all of the model complexity is stored in the ISessionFactory and Configuration objects. As for Entity Framework, the ObjectContext/DbContext holds the configuration, model and acts as the Unit of Work, holding references to all of the known entity instances. This class is therefore not lightweight as its NHibernate counterpart and it is not uncommon to see examples where an instance is cached on a field. Mappings Both NHibernate and Entity Framework (Code First) support the use of POCOs to represent entities, no base classes are required (or even possible, in the case of NHibernate). As for mapping to and from the database, NHibernate supports three types of mappings: XML-based, which have the advantage of not tying the entity classes to a particular O/RM; the XML files can be deployed as files on the file system or as embedded resources in an assembly; Attribute-based, for keeping both the entities and database details on the same place at the expense of polluting the entity classes with NHibernate-specific attributes; Strongly-typed code-based, which allows dynamic creation of the model and strongly typing it, so that if, for example, a property name changes, the mapping will also be updated. Entity Framework can use: Attribute-based (although attributes cannot express all of the available possibilities – for example, cascading); Strongly-typed code mappings. Database Support With NHibernate you can use mostly any database you want, including: SQL Server; SQL Server Compact; SQL Server Azure; Oracle; DB2; PostgreSQL; MySQL; Sybase Adaptive Server/SQL Anywhere; Firebird; SQLLite; Informix; Any through OLE DB; Any through ODBC. Out of the box, Entity Framework only supports SQL Server, but a number of providers exist, both free and commercial, for some of the most used databases, such as Oracle and MySQL. See a list here. Inheritance Strategies Both NHibernate and Entity Framework support the three canonical inheritance strategies: Table Per Type Hierarchy (Single Table Inheritance), Table Per Type (Class Table Inheritance) and Table Per Concrete Type (Concrete Table Inheritance). Associations Regarding associations, both support one to one, one to many and many to many. However, NHibernate offers far more collection types: Bags of entities or values: unordered, possibly with duplicates; Lists of entities or values: ordered, indexed by a number column; Maps of entities or values: indexed by either an entity or any value; Sets of entities or values: unordered, no duplicates; Arrays of entities or values: indexed, immutable. Querying NHibernate exposes several querying APIs: LINQ is probably the most used nowadays, and really does not need to be introduced; Hibernate Query Language (HQL) is a database-agnostic, object-oriented SQL-alike language that exists since NHibernate’s creation and still offers the most advanced querying possibilities; well suited for dynamic queries, even if using string concatenation; Criteria API is an implementation of the Query Object pattern where you create a semi-abstract conceptual representation of the query you wish to execute by means of a class model; also a good choice for dynamic querying; Query Over offers a similar API to Criteria, but using strongly-typed LINQ expressions instead of strings; for this, although more refactor-friendlier that Criteria, it is also less suited for dynamic queries; SQL, including stored procedures, can also be used; Integration with Lucene.NET indexer is available. As for Entity Framework: LINQ to Entities is fully supported, and its implementation is considered very complete; it is the API of choice for most developers; Entity-SQL, HQL’s counterpart, is also an object-oriented, database-independent querying language that can be used for dynamic queries; SQL, of course, is also supported. Caching Both NHibernate and Entity Framework, of course, feature first-level cache. NHibernate also supports a second-level cache, that can be used among multiple ISessionFactorys, even in different processes/machines: Hashtable (in-memory); SysCache (uses ASP.NET as the cache provider); SysCache2 (same as above but with support for SQL Server SQL Dependencies); Prevalence; SharedCache; Memcached; Redis; NCache; Appfabric Caching. Out of the box, Entity Framework does not have any second-level cache mechanism, however, there are some public samples that show how we can add this. ID Generators NHibernate supports different ID generation strategies, coming from the database and otherwise: Identity (for SQL Server, MySQL, and databases who support identity columns); Sequence (for Oracle, PostgreSQL, and others who support sequences); Trigger-based; HiLo; Sequence HiLo (for databases that support sequences); Several GUID flavors, both in GUID as well as in string format; Increment (for single-user uses); Assigned (must know what you’re doing); Sequence-style (either uses an actual sequence or a single-column table); Table of ids; Pooled (similar to HiLo but stores high values in a table); Native (uses whatever mechanism the current database supports, identity or sequence). Entity Framework only supports: Identity generation; GUIDs; Assigned values. Properties NHibernate supports properties of entity types (one to one or many to one), collections (one to many or many to many) as well as scalars and enumerations. It offers a mechanism for having complex property types generated from the database, which even include support for querying. It also supports properties originated from SQL formulas. Entity Framework only supports scalars, entity types and collections. Enumerations support will come in the next version. Events and Interception NHibernate has a very rich event model, that exposes more than 20 events, either for synchronous pre-execution or asynchronous post-execution, including: Pre/Post-Load; Pre/Post-Delete; Pre/Post-Insert; Pre/Post-Update; Pre/Post-Flush. It also features interception of class instancing and SQL generation. As for Entity Framework, only two events exist: ObjectMaterialized (after loading an entity from the database); SavingChanges (before saving changes, which include deleting, inserting and updating). Tracking Changes For NHibernate as well as Entity Framework, all changes are tracked by their respective Unit of Work implementation. Entities can be attached and detached to it, Entity Framework does, however, also support self-tracking entities. Optimistic Concurrency Control NHibernate supports all of the imaginable scenarios: SQL Server’s ROWVERSION; Oracle’s ORA_ROWSCN; A column containing date and time; A column containing a version number; All/dirty columns comparison. Entity Framework is more focused on Entity Framework, so it only supports: SQL Server’s ROWVERSION; Comparing all/some columns. Batching NHibernate has full support for insertion batching, but only if the ID generator in use is not database-based (for example, it cannot be used with Identity), whereas Entity Framework has no batching at all. Cascading Both support cascading for collections and associations: when an entity is deleted, their conceptual children are also deleted. NHibernate also offers the possibility to set the foreign key column on children to NULL instead of removing them. Flushing Changes NHibernate’s ISession has a FlushMode property that can have the following values: Auto: changes are sent to the database when necessary, for example, if there are dirty instances of an entity type, and a query is performed against this entity type, or if the ISession is being disposed; Commit: changes are sent when committing the current transaction; Never: changes are only sent when explicitly calling Flush(). As for Entity Framework, changes have to be explicitly sent through a call to AcceptAllChanges()/SaveChanges(). Lazy Loading NHibernate supports lazy loading for Associated entities (one to one, many to one); Collections (one to many, many to many); Scalar properties (thing of BLOBs or CLOBs). Entity Framework only supports lazy loading for: Associated entities; Collections. Generating and Updating the Database Both NHibernate and Entity Framework Code First (with the Migrations API) allow creating the database model from the mapping and updating it if the mapping changes. Extensibility As you can guess, NHibernate is far more extensible than Entity Framework. Basically, everything can be extended, from ID generation, to LINQ to SQL transformation, HQL native SQL support, custom column types, custom association collections, SQL generation, supported databases, etc. With Entity Framework your options are more limited, at least, because practically no information exists as to what can be extended/changed. It features a provider model that can be extended to support any database. Integration With Other Microsoft APIs and Tools When it comes to integration with Microsoft technologies, it will come as no surprise that Entity Framework offers the best support. For example, the following technologies are fully supported: ASP.NET (through the EntityDataSource); ASP.NET Dynamic Data; WCF Data Services; WCF RIA Services; Visual Studio (through the integrated designer). Documentation This is another point where Entity Framework is superior: NHibernate lacks, for starters, an up to date API reference synchronized with its current version. It does have a community mailing list, blogs and wikis, although not much used. Entity Framework has a number of resources on MSDN and, of course, several forums and discussion groups exist. Conclusion Like I said, this is a personal list. I may come as a surprise to some that Entity Framework is so behind NHibernate in so many aspects, but it is true that NHibernate is much older and, due to its open-source nature, is not tied to product-specific timeframes and can thus evolve much more rapidly. I do like both, and I chose whichever is best for the job I have at hands. I am looking forward to the changes in EF5 which will add significant value to an already interesting product. So, what do you think? Did I forget anything important or is there anything else worth talking about? Looking forward for your comments!

Read the article

SQL SERVER – PAGELATCH_DT, PAGELATCH_EX, PAGELATCH_KP, PAGELATCH_SH, PAGELATCH_UP – Wait Type – Day 12 of 28

- by pinaldave

This is another common wait type. However, I still frequently see people getting confused with PAGEIOLATCH_X and PAGELATCH_X wait types. Actually, there is a big difference between the two. PAGEIOLATCH is related to IO issues, while PAGELATCH is not related to IO issues but is oftentimes linked to a buffer issue. Before we delve deeper in this interesting topic, first let us understand what Latch is. Latches are internal SQL Server locks which can be described as very lightweight and short-term synchronization objects. Latches are not primarily to protect pages being read from disk into memory. It’s a synchronization object for any in-memory access to any portion of a log or data file.[Updated based on comment of Paul Randal] The difference between locks and latches is that locks seal all the involved resources throughout the duration of the transactions (and other processes will have no access to the object), whereas latches locks the resources during the time when the data is changed. This way, a latch is able to maintain the integrity of the data between storage engine and data cache. A latch is a short-living lock that is put on resources on buffer cache and in the physical disk when data is moved in either directions. As soon as the data is moved, the latch is released. Now, let us understand the wait stat type related to latches. From Book On-Line: PAGELATCH_DT Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Destroy mode. PAGELATCH_EX Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Exclusive mode. PAGELATCH_KP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Keep mode. PAGELATCH_SH Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Shared mode. PAGELATCH_UP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Update mode. PAGELATCH_X Explanation: When there is a contention of access of the in-memory pages, this wait type shows up. It is quite possible that some of the pages in the memory are of very high demand. For the SQL Server to access them and put a latch on the pages, it will have to wait. This wait type is usually created at the same time. Additionally, it is commonly visible when the TempDB has higher contention as well. If there are indexes that are heavily used, contention can be created as well, leading to this wait type. Reducing PAGELATCH_X wait: The following counters are useful to understand the status of the PAGELATCH: Average Latch Wait Time (ms): The wait time for latch requests that have to wait. Latch Waits/sec: This is the number of latch requests that could not be granted immediately. Total Latch Wait Time (ms): This is the total latch wait time for latch requests in the last second. If there is TempDB contention, I suggest that you read the blog post of Robert Davis right away. He has written an excellent blog post regarding how to find out TempDB contention. The same blog post explains the terms in the allocation of GAM, SGAM and PFS. If there was a TempDB contention, Paul Randal explains the optimal settings for the TempDB in his misconceptions series. Trace Flag 1118 can be useful but use it very carefully. I totally understand that this blog post is not as clear as my other blog posts. I suggest if this wait stats is on one of your higher wait type. Do leave a comment or send me an email and I will get back to you with my solution for your situation. May the looking at all other wait stats and types together become effective as this wait type can help suggest proper bottleneck in your system. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Read the article

TFS API-Process Template currently applied to the Team Project

- by Tarun Arora

Download Demo Solution - here In this blog post I’ll show you how to use the TFS API to get the name of the Process Template that is currently applied to the Team Project. You can also download the demo solution attached, I’ve tested this solution against TFS 2010 and TFS 2011. 1. Connecting to TFS Programmatically I have a blog post that shows you from where to download the VS 2010 SP1 SDK and how to connect to TFS programmatically. private TfsTeamProjectCollection _tfs; private string _selectedTeamProject; TeamProjectPicker tfsPP = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPP.ShowDialog(); this._tfs = tfsPP.SelectedTeamProjectCollection; this._selectedTeamProject = tfsPP.SelectedProjects[0].Name; 2. Programmatically get the Process Template details of the selected Team Project I’ll be making use of the VersionControlServer service to get the Team Project details and the ICommonStructureService to get the Project Properties. private ProjectProperty[] GetProcessTemplateDetailsForTheSelectedProject() { var vcs = _tfs.GetService<VersionControlServer>(); var ics = _tfs.GetService<ICommonStructureService>(); ProjectProperty[] ProjectProperties = null; var p = vcs.GetTeamProject(_selectedTeamProject); string ProjectName = string.Empty; string ProjectState = String.Empty; int templateId = 0; ProjectProperties = null; ics.GetProjectProperties(p.ArtifactUri.AbsoluteUri, out ProjectName, out ProjectState, out templateId, out ProjectProperties); return ProjectProperties; } 3. What’s the catch? The ProjectProperties will contain a property “Process Template” which as a value has the name of the process template. So, you will be able to use the below line of code to get the name of the process template. var processTemplateName = processTemplateDetails.Where(pt => pt.Name == "Process Template").Select(pt => pt.Value).FirstOrDefault(); However, if the process template does not contain the property “Process Template” then you will need to add it. So, the question becomes how do i add the Name property to the Process Template. Download the Process Template from the Process Template Manager on your local Once you have downloaded the Process Template to your local machine, navigate to the Classification folder with in the template From the classification folder open Classification.xml Add a new property <property name=”Process Template” value=”MSF for CMMI Process Improvement v5.0” /> 4. Putting it all together… using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.VersionControl.Client; using Microsoft.TeamFoundation.Server; using System.Diagnostics; using Microsoft.TeamFoundation.WorkItemTracking.Client; namespace TfsAPIDemoProcessTemplate { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private TfsTeamProjectCollection _tfs; private string _selectedTeamProject; private void btnConnect_Click(object sender, EventArgs e) { TeamProjectPicker tfsPP = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPP.ShowDialog(); this._tfs = tfsPP.SelectedTeamProjectCollection; this._selectedTeamProject = tfsPP.SelectedProjects[0].Name; var processTemplateDetails = GetProcessTemplateDetailsForTheSelectedProject(); listBox1.Items.Clear(); listBox1.Items.Add(String.Format("Team Project Selected => '{0}'", _selectedTeamProject)); listBox1.Items.Add(Environment.NewLine); var processTemplateName = processTemplateDetails.Where(pt => pt.Name == "Process Template") .Select(pt => pt.Value).FirstOrDefault(); if (!string.IsNullOrEmpty(processTemplateName)) { listBox1.Items.Add(Environment.NewLine); listBox1.Items.Add(String.Format("Process Template Name: {0}", processTemplateName)); } else { listBox1.Items.Add(String.Format("The Process Template does not have the 'Name' property set up")); listBox1.Items.Add(String.Format("***TIP: Download the Process Template and in Classification.xml add a new property Name, update the template then you will be able to see the Process Template Name***")); listBox1.Items.Add(String.Format(" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -")); } } private ProjectProperty[] GetProcessTemplateDetailsForTheSelectedProject() { var vcs = _tfs.GetService<VersionControlServer>(); var ics = _tfs.GetService<ICommonStructureService>(); ProjectProperty[] ProjectProperties = null; var p = vcs.GetTeamProject(_selectedTeamProject); string ProjectName = string.Empty; string ProjectState = String.Empty; int templateId = 0; ProjectProperties = null; ics.GetProjectProperties(p.ArtifactUri.AbsoluteUri, out ProjectName, out ProjectState, out templateId, out ProjectProperties); return ProjectProperties; } } } Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Have you come across a better way of doing this, please share your experience here. Questions/Feedback/Suggestions, etc please leave a comment. Thank You! Share this post : CodeProject

Read the article

The way I think about Diagnostic tools

- by Daniel Moth

Every software has issues, or as we like to call them "bugs". That is not a discussion point, just a mere fact. It follows that an important skill for developers is to be able to diagnose issues in their code. Of course we need to advance our tools and techniques so we can prevent bugs getting into the code (e.g. unit testing), but beyond designing great software, diagnosing bugs is an equally important skill. To diagnose issues, the most important assets are good techniques, skill, experience, and maybe talent. What also helps is having good diagnostic tools and what helps further is knowing all the features that they offer and how to use them. The following classification is how I like to think of diagnostics. Note that like with any attempt to bucketize anything, you run into overlapping areas and blurry lines. Nevertheless, I will continue sharing my generalizations ;-) It is important to identify at the outset if you are dealing with a performance or a correctness issue. If you have a performance issue, use a profiler. I hear people saying "I am using the debugger to debug a performance issue", and that is fine, but do know that a dedicated profiler is the tool for that job. Just because you don't need them all the time and typically they cost more plus you are not as familiar with them as you are with the debugger, doesn't mean you shouldn't invest in one and instead try to exclusively use the wrong tool for the job. Visual Studio has a profiler and a concurrency visualizer (for profiling multi-threaded apps). If you have a correctness issue, then you have several options - that's next :-) This is how I think of identifying a correctness issue Do you want a tool to find the issue for you at design time? The compiler is such a tool - it gives you an exact list of errors. Compilers now also offer warnings, which is their way of saying "this may be an error, but I am not smart enough to know for sure". There are also static analysis tools, which go a step further than the compiler in identifying issues in your code, sometimes with the aid of code annotations and other times just by pointing them at your raw source. An example is FxCop and much more in Visual Studio 11 Code Analysis. Do you want a tool to find the issue for you with code execution? Just like static tools, there are also dynamic analysis tools that instead of statically analyzing your code, they analyze what your code does dynamically at runtime. Whether you have to setup some unit tests to invoke your code at runtime, or have to manually run your app (and interact with it) under the tool, or have to use a script to execute your binary under the tool… that varies. The result is still a list of issues for you to address after the analysis is complete or a pause of the execution when the first issue is encountered. If a code path was not taken, no analysis for it will exist, obviously. An example is the GPU Race detection tool that I'll be talking about on the C++ AMP team blog. Another example is the MSR concurrency CHESS tool. Do you want you to find the issue at design time using a tool? Perform a code walkthrough on your own or with colleagues. There are code review tools that go beyond just diffing sources, and they help you with that aspect too. For example, there is a new one in Visual Studio 11 and searching with my favorite search engine yielded this article based on the Developer Preview. Do you want you to find the issue with code execution? Use a debugger - let’s break this down further next. This is how I think of debugging: There is post mortem debugging. That means your code has executed and you did something in order to examine what happened during its execution. This can vary from manual printf and other tracing statements to trace events (e.g. ETW) to taking dumps. In all cases, you are left with some artifact that you examine after the fact (after code execution) to discern what took place hoping it will help you find the bug. Learn how to debug dump files in Visual Studio. There is live debugging. I will elaborate on this in a separate post, but this is where you inspect the state of your program during its execution, and try to find what the problem is. More from me in a separate post on live debugging. There is a hybrid of live plus post-mortem debugging. This is for example what tools like IntelliTrace offer. If you are a tools vendor interested in the diagnostics space, it helps to understand where in the above classification your tool excels, where its primary strength is, so you can market it as such. Then it helps to see which of the other areas above your tool touches on, and how you can make it even better there. Finally, see what areas your tool doesn't help at all with, and evaluate whether it should or continue to stay clear. Even though the classification helps us think about this space, the reality is that the best tools are either extremely excellent in only one of this areas, or more often very good across a number of them. Another approach is to offer a toolset covering all areas, with appropriate integration and hand off points from one to the other. Anyway, with that brain dump out of the way, in follow-up posts I will dive into live debugging, and specifically live debugging in Visual Studio - stay tuned if that interests you. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

From Bluehost to WP Engine, My WordPress Story

- by thatjeffsmith

This is probably the longest blog post I’ve written in a LONG time. And if you’re used to coming here for the Oracle stuff, this post is not about that. It’s about my blog, and the stuff under the hood that makes it run, AKA WordPress. If you want to skip to the juicy stuff, then use these shortcuts: My Site Slowed Down How I Moved to WP Engine How WP Engine ‘Hooked’ Me Why WP Engine? I started thatJeffSmith.com on May 28th, 2010. I had been already been blogging for several years, but a couple of really smart people I respected (Andy, Brent – thanks again!) suggested that I take ownership of my content and begin building my personal brand. I thought that was a good idea, and so I signed up for service with bluehost. Bluehost makes setting up a WordPress site very, very easy. And, they continued to be easy to work with for the past 2 years. I would even recommend them to anyone looking to host their own WordPress install/site. For $83.40, I purchased a year’s worth of service and my domain name registration – a very good value. And then last year I paid $107.40 for another year’s services. And when that year expired I paid another $190.80 for an additional two year’s service in advance. I had been up to that point, getting my money’s worth. And then, just a few weeks ago… My Site Slowed to a Crawl That spike was from an April Fool's Day Post, I think Why? Well, when I first started blogging, I had the same problem that most beginner bloggers have – not many readers. In my first year of blogging, I think the highest number of readers on a single day was about 125. I remember that day as I was very excited to break 100! Bluehost was very reliable, serving up my content with maybe a total of 3-4 outages in the past 2 years. Support was usually very prompt with answers and solutions, and I love their ‘Chat now’ technology – much nicer than message boards only or pay-to-talk phone support. In the past 6 months however, I noticed a couple of things: daily traffic was increasing – woohoo! my service was experiencing severe CPU throttling – doh! To be honest, I wasn’t aware the throttling was occuring, but I did know that the response time of my blog was starting to lag. Average load times were approaching 20-30 seconds. Not good when good sites are loading in 5 seconds or less. And just this past week, in getting ready to launch a new website for work that sucked in an RSS feed from my blog, the new page was left waiting for more than a minute. Not good! In fact my boss asked, why aren’t you blogging on Blogger? Ugh. I tried a few things to fix the problem: I paid for a premium WordPress theme – Themify’s Grido (thanks to @SQLRockstar for the heads-up) I installed a couple of WP caching plugins I read every WP optimization blog post I could get my greedy little eyes on However, at the same time I was also getting addicted to WordPress bloggers talking about all the cool things you could do with your blog. As a result I had at one point about 30 different plugins installed. WordPress runs on MySQL, and certain queries running via these plugins were starving for CPU. Plugins that would be called every page load meant that as more people clicked on my site, the more CPU I needed. I’m not stupid, so I eventually figured out that maybe less plugins was better, and was able to go down to just 20. But still, the site was running like a dog. CPU Throttling, makes MySQL wait to run a query Bluehost runs shared servers. Your site runs on the same box that several hundred (or thousand?) other services are running on. If you take more CPU than they think you should have, they will limit your service by making you stand in line for CPU, AKA ‘throttling.’ This is not bad. This business model allows them to serve many, many users for a very fair price. It works great until, well, until it doesn’t. I noticed in the last week that for every minute of service, I was being throttled between 60 and 300 seconds. If there were 5 MySQL processes running, then every single one of them were being held in check. The blog visitor notice this as their page requests would take a minute or more to be answered. Bluehost unfortunately doesn’t offer dedicated server hosting, so there was no real upgrade path for me follow and remain one of their customers. So what was I to do? Uninstall every plugin and hope the site sped up? Ask for people to take turns on my blog? I decided to spend my way out of the problem. I signed up for service with WP Engine and moved ThatJeffSmith.com The first 2 months are free, and after that it’s about $29/month to run my site on their system. My math tells me that’s a good bit more expensive than what Bluehost was charging me – to the tune of about 300% more a month. Oh, and I should just say that my blog is a personal blog even though I talk about work stuff here. I don’t get paid for blogging, I don’t sell ads, and I don’t expense the service fees – this is my personal passion. So is it worth it? In the first 4 days, it seems to be totally worth it. Load times have gone from 20-30 seconds to less than 5 seconds. A few folks have told me via Twitter that they notice faster page loads. I anticipate this will indirectly lead to more traffic as Google penalizes you in search results if your site is too slow, and of course some folks won’t even bother waiting more than 5-10 seconds. I noticed right away that writing posts, uploading pictures, and just using the WordPress dashboard in general was much more responsive. So writing is less of a chore now, which means I won’t have a good reason not to write How I Moved to WP Engine I signed up for the service and registered my domain. I then took a full export of my ‘old’ site by doing a FTP GET of all my files, then did a MySQL database backup, exported my WordPress Theme settings to a .zip file, and then finally used the WordPress ‘Export’ feature. I then used the WordPress ‘Import’ on the new site to load up my posts. Then I uploaded the theme .zip package from Themify. Then I FTP’d the ‘wp-content’ directory up to my new server using SFTP (WP Engine only supports secure FTP – good on them!) Using a temporary URL to see my new site, I was able to confirm that everything looked mostly OK – I’ll detail the challenges and issues of fixing the content next – but then it was time to ‘flip the switch.’ I updated the IP address that the DNS lookup tables use to route traffic to my new server. In a matter of minutes the DNS servers around the world were updated and it was time to see the new site! But It Was ‘Broken’ I had never moved a website before, and in my rush to update the DNS, I had changed the records without really finding out what I was supposed to do first. After re-reading the directions provided by WP Engine and following the guidance of their support engineer, I realized I had needed to set the CNAME (Alias) ‘www’ record to point to a different URL than the ‘www.thatjeffsmith.com’ entry I had set. Once corrected the site was up and running in less than a minute. Then It Was Only Mostly Broken Many of my plugins weren’t working. Apparently just ftp’ing the wp-content directory up wasn’t the proper way to re-install the plugin. I suspect file permissions or file ownership wasn’t proper. Some plug-ins were working, many had their settings wiped to the defaults, and a few just didn’t work again. I had to delete the directory of the plug-in manually via SFTP, and then use the WP Dashboard to install it from scratch. And here was my first ‘lesson’ – don’t switch the DNS records until you’ve completely tested your new site. I wasn’t able to navigate the old WP console to review my plug-in settings. Thankfully I was able to use the Wayback Machine to reverse engineer some things, and of course most plug-ins aren’t that complicated to setup to begin with. An example of one that I had to redo from scratch is the ‘Twitter @Anywhere Plus’ plugin that I use to create the form that allows folks to tweet a post they enjoyed at the end of each story. How WP Engine ‘Hooked’ Me I actually signed up with another provider first. They ranked highly in Google searches and a few Tweeps recommended them to me. But hours after signing up and I still didn’t have sever reyady, I was ready to give up on them. They offered no chat or phone support – only mail and message boards. And the message boards were rife with posts about how the service had gone downhill in the past 6 months. To their credit, they did make it easy to cancel, although I did have to do so via email as their website ‘cancel’ button was non-existent. Within minutes of activating my WP Engine account I had received my welcome message and directions on how to get started. I was able to see my staged website right away. They also did something very cool before I even got started – they looked at my existing site and told me by how much they could improve its performance. The proof is in the web pudding. I like this for a few reasons, but primarily I liked their business model. It told me they knew what they were doing, and that they were willing to put their money where their mouth was. This was further evident by their 60-day money back guarantee. And if I understand it correctly, they don’t even take your money until after that 60 day period is over. After a day, I was welcomed by the WP Engine social media team, and was given the opportunity to subscribe to their newsletter and follow their account on Twitter. I noticed their Twitter team is sure to post regular WordPress tips several times a day. It’s not just an account that’s setup for the sake of having a Twitter presence. These little things add up and give me confidence in my decision to choose them as my hosting partner. ‘Partner’ – that’s a lot nicer word than just ‘service provider,’ isn’t it? Oh, and they offered me a t-shirt. Don’t ever doubt the power of a ‘free’ t-shirt! How awesome is this e-mail, from a customer perspective? I wasn’t really expecting any of this. Exceeding expectations before I have even handed over a single dollar seems like a pretty good business plan. This is how you treat customers. Love them to death, and they reward you with loyalty. But Jeff, You Skipped a Piece Here, Why WP Engine? I found them on one of those ‘Top 10′ list posts, and pulled up their webpage. I noticed they offered a specialized service – they host WordPress installs, and that’s it. Their servers are tuned specifically for running WordPress. They had in bolded text, things like ‘INSANELY FAST. INFINITELY SCALABLE.’ and ‘LIGHTNING SPEED.’ And then they offered insurance against hackers and they took care of automatic backups and restores. The only drawbacks I have noticed so far relate to plugins I used that have been ‘blacklisted.’ In order to guarantee that ‘lightning’ speed, they have banned the use of the CPU-suckiest plugins. One of those is the ‘Related Posts’ plugin. So if you are a subscriber and are reading this in your email, you’ll notice there’s no links back to my blog to continue reading other related stories. Since that referral traffic is very small single-digit for my site, I decided that I’m OK with that. I’d rather have the warp-speed page loads. Again, I think that will lead to higher traffic down the road. In 50+ days I will need to decide if WP Engine is a permanent solution. I’ll be sure to update this post when that time comes and let y’all know how it turns out.

Read the article

Integrating Code Metrics in TFS 2010 Build

- by Jakob Ehn

The build process template and custom activity described in this post is available here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/CodeMetricsSample.zip Running code metrics has been available since VS 2008, but only from inside the IDE. Yesterday Microsoft finally releases a Visual Studio Code Metrics Power Tool 10.0, a command line tool that lets you run code metrics on your applications. This means that it is now possible to perform code metrics analysis on the build server as part of your nightly/QA builds (for example). In this post I will show how you can run the metrics command line tool, and also a custom activity that reads the output and appends the results to the build log, and also fails he build if the metric values exceeds certain (configurable) treshold values. The code metrics tool analyzes all the methods in the assemblies, measuring cyclomatic complexity, class coupling, depth of inheritance and lines of code. Then it calculates a Maintainability Index from these values that is a measure f how maintanable this method is, between 0 (worst) and 100 (best). For information on hwo this value is calculated, see http://blogs.msdn.com/b/codeanalysis/archive/2007/11/20/maintainability-index-range-and-meaning.aspx. After this it aggregates the information and present it at the class, namespace and module level as well. Running Metrics.exe in a build definition Running the actual tool is easy, just use a InvokeProcess activity last in the Compile the Project sequence, reference the metrics.exe file and pass the correct arguments and you will end up with a result XML file in the drop directory. Here is how it is done in the attached build process template: In the above sequence I first assign the path to the code metrics result file ([BinariesDirectory]\result.xml) to a variable called MetricsResultFile, which is then sent to the InvokeProcess activity in the Arguments property. Here are the arguments for the InvokeProcess activity: Note that we tell metrics.exe to analyze all assemblies located in the Binaries folder. You might want to do some more intelligent filtering here, you probably don’t want to analyze all 3rd party assemblies for example. Note also the path to the metrics.exe, this is the default location when you install the Code Metrics power tool. You must of course install the power tool on all build servers. Using the standard output logging (in the Handle Standard Output/Handle Error Output sections), we get the following output when running the build: Integrating Code Metrics into the build Having the results available next to the build result is nice, but we want to have results integrated in the build result itself, and also to affect the outcome of the build. The point of having QA builds that measure, for example, code metrics is to make it very clear how the code being built measures up to the standards of the project/company. Just having a XML file available in the drop location will not cause the developers to improve their code, but a (partially) failing build will! To do this, we need to write a custom activity that parses the metrics result file, logs it to the build log and fails the build if the values frfom the metrics is below/above some predefined treshold values. The custom activity performs the following steps Parses the XML. I’m using Linq 2 XSD for this, since the XML schema for the result file is available, it is vey easy to generate code that lets you query the structure using standard Linq operators. Runs through the metric result hierarchy and logs the metrics for each level and also verifies maintainability index and the cyclomatic complexity with the treshold values. The treshold values are defined in the build process template are are sent in as arguments to the custom activity If the treshold values are exceeded, the activity either fails or partially fails the current build. For more information about the structure of the code metrics result file, read Cameron Skinner's post about it. It is very simpe and easy to understand. I won’t go through the code of the custom activity here, since there is nothing special about it and it is available for download so you can look at it and play with it yourself. The treshold values for Maintainability Index and Cyclomatic Complexity is defined in the build process template, and can be modified per build definition: I have taken the default value for these settings from my colleague Terje Sandström post on Code Metrics - suggestions for approriate limits. You’ll notice that this is quite an improvement compared to using code metrics inside the IDE, where Red/Yellow/Green limits are fixed (and the default values are somewaht strange, see Terjes post for a discussion on this) This is the first version of the code metrics integration with TFS 2010 Build, I will proabably enhance the functionality and the logging (the “tree view” structure in the log becomes quite hard to read) soon. I will also consider adding it to the Community TFS Build Extensions site when it becomes a bit more mature. Another obvious improvement is to extend the data warehouse of TFS and push the metric results back to the warehouse and make it visible in the reports.

Read the article

.NET Security Part 2

- by Simon Cooper

So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

Read the article

Silverlight Cream for December 18, 2010 -- #1012

- by Dave Campbell

In this Issue: Mark Monster, Kevin Dockx, Jeremy Likness(-2-,-3-), Timmy Kokke, Den Delimarsky, Mike Snow, Samuel Jack(-2-), and Renuka Prasad(-2-). Above the Fold: Silverlight: "Trigger a Storyboard on ViewModel changes" Mark Monster WP7: "Microsoft Push Notification in Windows Phone 7" Renuka Prasad Shoutouts: SilverlightGal sent me the link to The Silverlight Dossier ... I think it's a pretty good start... additions I'd like to see are ways to submit to the various areas. Michael Crump put up a contest that runs from now to January 1st... Win a set of Infragistics Silverlight Controls with Data Visualization!... pretty cool, Michael! If you visit WynApse.com, you'll see I have a subscription to LearnVisualStudio.net... and now they have posted a batch of WP7 videos... 64 of them to be exact... wow!: New video series From SilverlightCream.com: Trigger a Storyboard on ViewModel changes Mark Monster has a great post up about triggering Storyboard on ViewModel changes using the DataTrigger from Blend... cool stuff, and you can also do GoToStateAction or other actions or build yourowndang Trigger Action... fun awaits! ... sorry it took a while to post, Mark... been a tad overloaded here! Working with the Silverlight Rich Text Box control Kevin Dockx has had a post up for a while at SilverlightShow where he takes a good look at the RichText control and it's various capabilities, including source so you can give it a dance yourself. Lessons Learned in Personal Web Page Part 3: Custom Panel and Listbox Jeremy Likness's part 3 of his Personal Web Page lessons learned is covering the tres-cool 3D Panel he did... and he's got it all explained out... building from scratch via a custom panel and a Listbox control... A Silverlight MVVM Feed Reader from Scratch in 30 Minutes Jeremy Likness has a video tutorial showing building an MVVM/Silverlight feedreader in 30 minutes ... plus a couple mods that he noticed after the fact... beat that HTML5 :) Jounce Part 8: Raising Property Changed In Jeremy Likness's latest post, he has number 8 in his series on his MVVM platform, Jounce. This time he's explaining the property changed notification, has a very cool way of doing it, and some interesting comments from readers. Dependency Injection, MVVM, Ninject and Silverlight Timmy Kokke has a great tutorial up with associated demo project on Dependency Injection in MVVM and Silverlight. Some hidden features in the Windows Phone 7 emulator Den Delimarsky shows how to get some of the hidden features on your WP7 emulator like the Call History, Call Settings, and Details about the numbers. Playing sound effects on Windows Phone 7 Mike Snow's latest tip is playing sound effects on your WP7 ... a little bit of XNA here and there, and badabing, badaboom, you got sound! Day 3 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack has a couple more posts up about his 'Build a WP7 game in 3 Days' challenge... first up is Day 3 from 8:50 to 22:30 ... wow... long day! ... but he's got something good going now... some good external links also Day 3.5 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack's 3rd day ended with another half-day added on to put on some finishing touches... again, some good external links... and he finished with this Say hello to Simon Squared, my 3.5 day old WP7 Game Microsoft Push Notification in Windows Phone 7 Renuka Prasad has a bunch of material up that I've not been aware of (how did that happen, people??) ... here's the first of a couple of his posts on Code Project ... a very nice tutorial on the Push Notification process... great diagrams and external links. Windows Phone 7 – Toast Notification Using Windows Azure Cloud Service Renuka Prasad has another WP7 post on CodeProject... this one on Toast Notification... and he's using Azure and WCF all rolled into it as well... great diagrams, descriptions and all the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Your Next IT Job

- by BuckWoody

Some data professionals have worked (and plan to work) in the same place for a long time. In organizations large and small, the turnover rate just isn’t that high. This has not been my experience. About every 3-5 years I’ve changed either roles or companies. That might be due to the IT environment or my personality (or a mix of the two), but the point is that I’ve had many roles and worked for many companies large and small throughout my 27+ years in IT. At one point this might have been a detriment – a prospective employer looks at the resume and says “it seems you’ve moved around quite a bit.” But I haven’t found that to be the case all the time –in fact, in some cases the variety of jobs I’ve held has been an asset because I’ve seen what works (and doesn’t) in other environments, which can save time and money. So if you’re in the first camp – great! Stay where you are, and continue doing the work you love. but if you’re in the second, then this post might be useful. If you are planning on making a change, or perhaps you’ve hit a wall at your current location, you might start looking around for a better paying job – and there’s nothing wrong with that. We all try to make our lives better, and for some that involves more money. Money, however, isn’t always the primary motivator. I’ve gone to another job that doesn’t have as many benefits or has the same salary as the current job I’m working to gain more experience, get a better work/life balance and so on. It’s a mix of factors that only you know about. So I thought I would lay out a few advantages and disadvantages in the shops I’ve worked at. This post isn’t aimed at a single employer, but represents a mix of what I’ve experienced, and of course the opinions here are my own. You will most certainly have a different take – if so, please post a response! I also won’t mention a specific industry – I’ve worked everywhere from medical firms, legal offices, retail, billing centers, manufacturing, government, even to NASA. I’m focusing here mostly on size and composition. And I’m making some very broad generalizations here – I am fully aware that a small company might have great benefits and a large company might allow a lot of role flexibility. your mileage may vary – and again, post those comments! Small Company To me a “small company” means around 100 people or less – sometimes a lot less. These can be really fun, frustrating places to to work. Advantages: a great deal of flexibility, a wide range of roles (often at the same time), a large degree of responsibility, immediate feedback, close relationships with co-workers, work directly with your customer. Disadvantages: Too much responsibility, little work/life balance, immature political structure, few (if any) benefits. If the business is family-owned, they can easily violate work/life boundaries. Medium Size company In my experience the next size company I would work for involves from a few hundred people to around five thousand. Advantages: Good mobility – fairly easy to get promoted, acceptable benefits, more defined responsibilities, better work/life balance, balanced load for expertise, but still the organizational structure is fairly simple to understand. Disadvantages: Pay is not always highest, rapid changes in structure as the organization grows, transient workforce. You may not be given the opportunity to work with another technology if someone already “owns” it. Politics are painful at this level as people try to learn how to do it. Large Company When you get into the tens of thousands of folks employed around the world, you’re in a large company. Advantages: Lots of room to move around – sometimes you can work (as I have) multiple jobs through the years and yet stay at the same company, building time for benefits, very defined roles, trained managers (yes, I know some of them are still awful – trust me – I DO know that), higher-end benefits, long careers possible, discounts at retailers and other “soft” benefits, prestige. For some, a higher level of politics (done professionally) is a good thing. Disadvantages: You could become another faceless name in the crowd, might not allow a great deal of flexibility, large organizational changes might take away any control you have of your career. I’ve also seen large layoffs happen, and good people get let go while “dead weight” is retained. For some, a higher level of politics is distasteful. So what are your experiences? Share with the group! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2

- by pinaldave

Social media has created an Always Connected World for us. Recently I enrolled myself to learn new technologies as a student. I had decided to focus on learning and decided not to stay connected on the internet while I am in the learning session. On the second day of the event after the learning was over, I noticed lots of notification from my friend on my various social media handle. He had connected with me on Twitter, Facebook, Google+, LinkedIn, YouTube as well SMS, WhatsApp on the phone, Skype messages and not to forget with a few emails. I right away called him up. The problem was very unique – let us hear the problem in his own words. “Pinal – we are in big trouble we are not able to figure out what is going on. Our product details table is continuously loosing rows. Lots of rows have disappeared since morning and we are unable to find why the rows are getting deleted. We have made sure that there is no DELETE command executed on the table as well. The matter of the fact, we have removed every single place the code which is referencing the table. We have done so many crazy things out of desperation but no luck. The rows are continuously deleted in a random pattern. Do you think we have problems with intrusion or virus?” After describing the problems he had pasted few rants about why I was not available during the day. I think it will be not smart to post those exact words here (due to many reasons). Well, my immediate reaction was to get online with him. His problem was unique to him and his team was all out to fix the issue since morning. As he said he has done quite a lot out in desperation. I started asking questions from audit, policy management and profiling the data. Very soon I realize that I think this problem was not as advanced as it looked. There was no intrusion, SQL Injection or virus issue. Well, long story short first - It was a very simple issue of foreign key created with ON UPDATE CASCADE and ON DELETE CASCADE. CASCADE allows deletions or updates of key values to cascade through the tables defined to have foreign key relationships that can be traced back to the table on which the modification is performed. ON DELETE CASCADE specifies that if an attempt is made to delete a row with a key referenced by foreign keys in existing rows in other tables, all rows containing those foreign keys are also deleted. ON UPDATE CASCADE specifies that if an attempt is made to update a key value in a row, where the key value is referenced by foreign keys in existing rows in other tables, all of the foreign key values are also updated to the new value specified for the key. (Reference: BOL) In simple words – due to ON DELETE CASCASE whenever is specified when the data from Table A is deleted and if it is referenced in another table using foreign key it will be deleted as well. In my friend’s case, they had two tables, Products and ProductDetails. They had created foreign key referential integrity of the product id between the table. Now the as fall was up they were updating their catalogue. When they were updating the catalogue they were deleting products which are no more available. As the changes were cascading the corresponding rows were also deleted from another table. This is CORRECT. The matter of the fact, there is no error or anything and SQL Server is behaving how it should be behaving. The problem was in the understanding and inappropriate implementations of business logic. What they needed was Product Master Table, Current Product Catalogue, and Product Order Details History tables. However, they were using only two tables and without proper understanding the relation between them was build using foreign keys. If there were only two table, they should have used soft delete which will not actually delete the record but just hide it from the original product table. This workaround could have got them saved from cascading delete issues. I will be writing a detailed post on the design implications etc in my future post as in above three lines I cannot cover every issue related to designing and it is also not the scope of the blog post. More about designing in future blog posts. Once they learn their mistake, they were happy as there was no intrusion but trust me sometime we are our own enemy and this is a great example of it. In tomorrow’s blog post we will go over their code and workarounds. Feel free to share your opinions, experiences and comments. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Infiniband: a highperformance network fabric - Part I

- by Karoly Vegh

Introduction:At the OpenWorld this year I managed to chat with interesting people again - one of them answering Infiniband deepdive questions with ease by coffee turned out to be one of Oracle's IB engineers, Ted Kim, who actually actively participates in the Infiniband Trade Association and integrates Oracle solutions with this highspeed network. This is why I love attending OOW. He granted me an hour of his time to talk about IB. This post is mostly based on that tech interview.Start of the actual post: Traditionally datatransfer between servers and storage elements happens in networks with up to 10 gigabit/seconds or in SANs with up to 8 gbps fiberchannel connections. Happens. Well, data rather trickles through.But nowadays data amounts grow well over the TeraByte order of magnitude, and multisocket/multicore/multithread Servers hunger data that these transfer technologies just can't deliver fast enough, causing all CPUs of this world do one thing at the same speed - waiting for data. And once again, I/O is the bottleneck in computing. FC and Ethernet can't keep up. We have half-TB SSDs, dozens of TB RAM to store data to be modified in, but can't transfer it. Can't backup fast enough, can't replicate fast enough, can't synchronize fast enough, can't load fast enough. The bad news is, everyone is used to this, like back in the '80s everyone was used to start compile jobs and go for a coffee. Or on vacation. The good news is, there's an alternative. Not so-called "bleeding-edge" 8gbps, but (as of now) 56. Not layers of overhead, but low latency. And it is available now. It has been for a while, actually. Welcome to the world of Infiniband. Short history:Infiniband was born as a result of joint efforts of HPAQ, IBM, Intel, Sun and Microsoft. They planned to implement a next-generation I/O fabric, in the 90s. In the 2000s Infiniband (from now on: IB) was quite popular in the high-performance computing field, powering most of the top500 supercomputers. Then in the middle of the decade, Oracle realized its potential and used it as an interconnect backbone for the first Database Machine, the first Exadata. Since then, IB has been booming, Oracle utilizes and supports it in a large set of its HW products, it is the backbone of the famous Engineered Systems: Exadata, SPARC SuperCluster, Exalogic, OVCA and even the new DB backup/recovery box. You can also use it to make servers talk highspeed IP to eachother, or to a ZFS Storage Appliance. Following Oracle's lead, even IBM has jumped the wagon, and leverages IB in its PureFlex systems, their first InfiniBand Machines.IB Structural Overview: If you want to use IB in your servers, the first thing you will need is PCI cards, in IB terms Host Channel Adapters, or HCAs. Just like NICs for Ethernet, or HBAs for FC. In these you plug an IB cable, going to an IB switch providing connection to other IB HCAs. Of course you're going to need drivers for those in your OS. Yes, these are long-available for Solaris and Linux. Now, what protocols can you talk over IB? There's a range of choices. See, IB isn't accepting package loss like Ethernet does, and hence doesn't need to rely on TCP/IP as a workaround for resends. That is, you still can run IP over IB (IPoIB), and that is used in various cases for control functionality, but the datatransfer can run over more efficient protocols - like native IB. About PCI connectivity: IB cards, as you see are fast. They bring low latency, which is just as important as their bandwidth. Current IB cards run at 56 gbit/s. That is slightly more than double of the capacity of a PCI Gen2 slot (of ~25 gbit/s). And IB cards are equipped usually with two ports - that is, altogether you'd need 112 gbit/s PCI slots, to be able to utilize FDR IB cards in an active-active fashion. PCI Gen3 slots provide you with around ~50gbps. This is why the most IB cards are configured in an active-standby way if both ports are used. Once again the PCI slot is the bottleneck. Anyway, the new Oracle servers are equipped with Gen3 PCI slots, an the new IB HCAs support those too. Oracle utilizes the QDR HCAs, running at 40gbp/s brutto, which translates to a 32gbp/s net traffic due to the 10:8 signal-to-data information ratio. Consolidation techniques: Technology never stops to evolve. Mellanox is working on the 100 gbps (EDR) version already, which will be optical, since signal technology doesn't allow EDR to be copper. Also, I hear you say "100gbps? I will never use/need that much". Are you sure? Have you considered consolidation scenarios, where (for example with Oracle Virtual Network) you could consolidate your platform to a high densitiy virtualized solution providing many virtual 10gbps interfaces through that 100gbps? Technology never stops to evolve. I still remember when a 10mbps network was impressively fast. Back in those days, 16MB of RAM was a lot. Now we usually run servers with around 100.000 times more RAM. If network infrastrucure speends could grow as fast as main memory capacities, we'd have a different landscape now :) You can utilize SRIOV as well for consolidation. That is, if you run LDoms (aka Oracle VM Server for SPARC) you do not have to add physical IB cards to all your guest LDoms, and you do not need to run VIO devices through the hypervisor either (avoiding overhead). You can enable SRIOV on those IB cards, which practically virtualizes the PCI bus, and you can dedicate Physical- and Virtual Functions of the virtualized HCAs as native, physical HW devices to your guests. See Raghuram's excellent post explaining SRIOV. SRIOV for IB is supported since LDoms 3.1. This post is getting lengthier, so I will rename it to Part I, and continue it in a second post.

Read the article

Add SQL Azure database to Azure Web Role and persist data with entity framework code first.

- by MagnusKarlsson

In my last post I went for a warts n all approach to set up a web role on Azure. In this post I’ll describe how to add an SQL Azure database to the project. This will be described with an as minimal as possible amount of code and screen dumps. All questions are welcome in the comments area. Please don’t email since questions answered in the comments field is made available to other visitors. As an example we will add a comments section to the site we used in the previous post (Länk här). Steps: 1. Create a Comments entity and then use Scaffolding to set up controller and view, and add ConnectionString to web.config. 2. Create SQL Azure database in Management Portal and link the new database 3. Test it online! 1. Right click Models folder, choose add, choose “class…” . Name the Class Comment. 1.1 Replace the Code in the class with the following: using System.Data.Entity; namespace MvcWebRole1.Models { public class Comment { public int CommentId { get; set; } public string Name { get; set; } public string Content { get; set; } } public class CommentsDb : DbContext { public DbSet<Comment> CommentEntries { get; set; } } } Now Entity Framework can create a database and a table named Comment. Build your project to assert there are no build errors. 1.2 Right click Controllers folder, choose add, choose “class…” . Name the Class CommentController and fill out the values as in the example below. 1.3 Click Add. Visual Studio now creates default View for CRUD operations and a Controller adhering to these and opens them. 1.3 Open Web.config and add the following connectionstring in <connectionStrings> node. <add name="CommentsDb” connectionString="data source=(LocalDB)\v11.0;Integrated Security=SSPI;AttachDbFileName=|DataDirectory|\CommentsDb.mdf;Initial Catalog=CommentsDb;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" /> 1.4 Save All and press F5 to start the application. 1.5 Go to http://127.0.0.1:81/Comments which will redirect you through CommentsController to the Index View which looks like this: Click Create new. In the Create-view, add name and content and press Create. 1: // 2: // POST: /Comments/Create 3: 4: [HttpPost] 5: public ActionResult Create(Comment comment) 6: { 7: if (ModelState.IsValid) 8: { 9: db.CommentEntries.Add(comment); 10: db.SaveChanges(); 11: return RedirectToAction("Index"); 12: } 13: 14: return View(comment); 15: } 16: The default View() is Index so that is the View you will come to. Looking like this: 1: // 2: // GET: /Comments/ 3: 4: public ActionResult Index() 5: { 6: return View(db.CommentEntries.ToList()); 7: } Resulting in the following screen dump(success!): 2. Now, go to the Management portal and Create a new db. 2.1 With the new database created. Click the DB icon in the left most menu. Then click the newly created database. Click DASHBOARD in the top menu. Finally click Connections strings in the right menu to get the connection string we need to add in our web.debug.config file. 2.2 Now, take a copy of the connection String earlier added to the web.config and paste in web.debug.conifg in the connectionstrings node. Replace everything within “ “ in the copied connectionstring with that you got from SQL Azure. You will have something like this: 2.3 Rebuild the application, right click the cloud project and choose “Package…” (if you haven’t set up publishing profile which we will do in our next blog post). Remember to choose the right config file, use debug for staging and release for production so your databases won’t collide. You should see something like this: 2.4 Go to Management Portal and click the Web Services menu, choose your service and click update in the bottom menu. 2.5 Link the newly created database to your application. Click the LINKED RESOURCES in the top menu and then click “Link” in the bottom menu. You should get something like this. 3. Alright then. Under the Dashboard you can find the link to your application. Click it to open it in a browser and then go to ~/Comments to try it out just the way we did locally. Success and end of this story!

Read the article

Alternative way of developing for ASP.NET to WebForms - Any problems with this?

- by John

So I have been developing in ASP.NET WebForms for some time now but often get annoyed with all the overhead (like ViewState and all the JavaScript it generates), and the way WebForms takes over a lot of the HTML generation. Sometimes I just want full control over the markup and produce efficient HTML of my own so I have been experimenting with what I like to call HtmlForms. Essentially this is using ASP.NET WebForms but without the form runat="server" tag. Without this tag, ASP.NET does not seem to add anything to the page at all. From some basic tests it seems that it runs well and you still have the ability to use code-behind pages, and many ASP.NET controls such as repeaters. Of course without the form runat="server" many controls won't work. A post at Enterprise Software Development lists the controls that do require the tag. From that list you will see that all of the form elements like TextBoxes, DropDownLists, RadioButtons, etc cannot be used. Instead you use normal HTML form controls. But how do you access these HTML controls from the code behind? Retrieving values on post back is easy, you just use Request.QueryString or Request.Form. But passing data to the control could be a little messy. Do you use a ASP.NET Literal control in the value field or do you use <%= value % in the markup page? I found it best to add runat="server" to my HTML controls and then you can access the control in your code-behind like this: ((HtmlInputText)txtName).Value = "blah"; Here's a example that shows what you can do with a textbox and drop down list: Default.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="NoForm.Default" %> <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="NoForm.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN""http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form action="" method="post"> <label for="txtName">Name:</label> <input id="txtName" name="txtName" runat="server" /><br /> <label for="ddlState">State:</label> <select id="ddlState" name="ddlState" runat="server"> <option value=""></option> </select><br /> <input type="submit" value="Submit" /> </form> </body> </html> Default.aspx.cs using System; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; namespace NoForm { public partial class Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { //Default values string name = string.Empty; string state = string.Empty; if (Request.RequestType == "POST") { //If form submitted (post back) name = Request.Form["txtName"]; state = Request.Form["ddlState"]; //Server side form validation would go here //and actions to process form and redirect } ((HtmlInputText)txtName).Value = name; ((HtmlSelect)ddlState).Items.Add(new ListItem("ACT")); ((HtmlSelect)ddlState).Items.Add(new ListItem("NSW")); ((HtmlSelect)ddlState).Items.Add(new ListItem("NT")); ((HtmlSelect)ddlState).Items.Add(new ListItem("QLD")); ((HtmlSelect)ddlState).Items.Add(new ListItem("SA")); ((HtmlSelect)ddlState).Items.Add(new ListItem("TAS")); ((HtmlSelect)ddlState).Items.Add(new ListItem("VIC")); ((HtmlSelect)ddlState).Items.Add(new ListItem("WA")); if (((HtmlSelect)ddlState).Items.FindByValue(state) != null) ((HtmlSelect)ddlState).Value = state; } } } As you can see, you have similar functionality to ASP.NET server controls but more control over the final markup, and less overhead like ViewState and all the JavaScript ASP.NET adds. Interestingly you can also use HttpPostedFile to handle file uploads using your own input type="file" control (and necessary form enctype="multipart/form-data"). So my question is can you see any problems with this method, and any thoughts on it's usefulness? I have further details and tests on my blog.

Search Results

Search found 19953 results on 799 pages for 'post'.

Page 110/799 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117 | Next Page >

- by AisIceEyes

- by user3620111

- by RoboTamer

- by RoboTamer

- by crashbus

- by Dexter

- by dragon112

- by swift

- by memomk

- by Abdul Basit

- by Ricardo Peres

- by jkauffman

- by pinaldave

- by Tarun Arora

- by Daniel Moth

- by thatjeffsmith

- by Jakob Ehn

- by Simon Cooper

- by Dave Campbell

- by BuckWoody

- by pinaldave

- by Karoly Vegh

- by MagnusKarlsson

- by John

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117 | Next Page >