Search Results

Search found 3008 results on 121 pages for 'tech writer'.

Page 110/121 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Why do I get 'Connection refused - connect(2)' for some models?

  - by Will

  I have a rails application running for the past 90 days that suddenly stopped working. Debugging the problem I found that I can read from the DB but not write to it. At least for certain models. There is one model that I can save whereas all others return Connection refused - connect(2) when I attempt to save them. They all used to work fine last month. I have no idea how to determine what the problem may be. Unfortunately I do not have access to the actual server remotely right now so I am limited in my debugging ability. I was able to get some non-tech people to run simple commands though that may help identify my problem. I will also be getting access tomorrow at some point. 1 Check from the console ./script/console >> a = Post.last.clone => #<Post id: nil, title: "test"... >> a.ex_id = 7 >> a.save Connection refused - connect(2) ... ... >> b = Story.last.console => #<Story id: nil, title: "test"... >> a.ex_id = 7 >> a.save => true I am not sure why this works for story and not post. This is consistent over many tests. 2 Check from mysql ./script/dbconsole -p mysql> INSERT INTO Posts (`title`,`body`, `ex_id`) SELECT `title`, `body`, 7 FROM Posts WHERE ID = 1; Query OK, 1 row affected (0.01 sec) Records: 1 Duplicates: 0 Warnings: 0 And as you can see I am able to write to the table with the same credientials that Rails uses? Does anyone know why I get connection refused in the console?

  Read the article

• Specific path to java class file when embedded into HTML; Help urgent

  - by Jeevanism

  This is a resonant post to one of my other query due to an error with Java applet embedded into CMS pages. well, I tell issue:- Problem:- I have a website using Concrete 5 CMS, in which I have a page that I have embedded a Java applet class. This applet should show the system information which this applet is working fine in simple single HTML pages. now whenever I access my plugin Test page which created in Concrete 5 CMS (this page I embedded this java applet), it shows a Java error. The error is says incompatible Magic Number. Observation:- After a lot of searching through various tech forums, I finally found that, the issue is happened because the browser cannot load Java class file. The class file path location is wrong. Here below I post the log of server access when I test in my local machine. 127.0.0.1 - - [20/Dec/2012:12:59:28 +0800] "GET /linuxhouse/index.php/techlab/java/testvm.class HTTP/1.1" 200 1896 "-" "Mozilla/4.0 (Linux 2.6.37.6-0.9-desktop) Java/1.6.0_29" 127.0.0.1 - - [20/Dec/2012:12:59:29 +0800] "GET /linuxhouse/index.php/techlab/java/testvm.class HTTP/1.1" 200 1896 "-" "Mozilla/4.0 (Linux 2.6.37.6-0.9-desktop) Java/1.6.0_29" <<<<<<<<<<<<<<<<<<<<< Clearly, the path to Java class file is wrong. But I have no idea how to specify exact path in an embedded code. Is this a CMS specific issue. I have disabled Pretty URL feature of CMS. But still I cannot find the solution. here the referred Page that shows the java error. http://www.linux-house.net/v3/techlab/plugin pls pls give some insight..URGENT SOS

  Read the article

• General advice and guidelines on how to properly override object.GetHashCode()

  - by Svish

  According to MSDN, a hash function must have the following properties: If two objects compare as equal, the GetHashCode method for each object must return the same value. However, if two objects do not compare as equal, the GetHashCode methods for the two object do not have to return different values. The GetHashCode method for an object must consistently return the same hash code as long as there is no modification to the object state that determines the return value of the object's Equals method. Note that this is true only for the current execution of an application, and that a different hash code can be returned if the application is run again. For the best performance, a hash function must generate a random distribution for all input. I keep finding myself in the following scenario: I have created a class, implemented IEquatable<T> and overridden object.Equals(object). MSDN states that: Types that override Equals must also override GetHashCode ; otherwise, Hashtable might not work correctly. And then it usually stops up a bit for me. Because, how do you properly override object.GetHashCode()? Never really know where to start, and it seems to be a lot of pitfalls. Here at StackOverflow, there are quite a few questions related to GetHashCode overriding, but most of them seems to be on quite particular cases and specific issues. So, therefore I would like to get a good compilation here. An overview with general advice and guidelines. What to do, what not to do, common pitfalls, where to start, etc. I would like it to be especially directed at C#, but I would think it will work kind of the same way for other .NET languages as well(?). I think maybe the best way is to create one answer per topic with a quick and short answer first (close to one-liner if at all possible), then maybe some more information and end with related questions, discussions, blog posts, etc., if there are any. I can then create one post as the accepted answer (to get it on top) with just a "table of contents". Try to keep it short and concise. And don't just link to other questions and blog posts. Try to take the essence of them and then rather link to source (especially since the source could disappear. Also, please try to edit and improve answers instead of created lots of very similar ones. I am not a very good technical writer, but I will at least try to format answers so they look alike, create the table of contents, etc. I will also try to search up some of the related questions here at SO that answers parts of these and maybe pull out the essence of the ones I can manage. But since I am not very stable on this topic, I will try to stay away for the most part :p

  Read the article

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• Laptop LCD sometimes stops working on reboot. Please help.

  - by J Ringle

  I have a Gateway P-6831FX Laptop with Vista Ultimate. The Laptop LCD will sometimes not come on after I reboot the computer. I don't even close the lid and it happens. It isn't dim, it doesn't come on at all. No posting of CMOS (BIOS), nothing. Please note... this happens sometimes, not every time. Frustrating! When plugged into an external monitor, which works fine, Vista display properties can't even "sense" the laptop LCD. I try to enable the laptop LCD for dual display, turning on the laptop LCD, and it does nothing. It's like the laptop LCD is not even there. Manually taking a magnet in my hand to the laptop lid sensing switch (the sensor that turns off display/sleep mode when you close lid), sometimes causes the LCD backlight to "turn on" but not display any images. By "turn on" I mean I can see the screen backlight turn on to a 'dark gray' screen instead of pitch black. Subsequent reboot the laptop display is not working again! Here are the facts: Only happens at random and only after a reboot. Waking from Sleep mode isn't a problem. Pressing F4 function key for dual display does nothing when this happens. Closing lid doesn't seem to be related. (unless it is only after reboot.) using external magnet from laptop screen sensor sometimes triggers backlight to turn on but reboot back to square one with no LCD display. an external display always works fine. I have taken apart LCD, checked all wires and ribbons for loose connections or damage. I have replaced the Inverter. It doesn't seem to be heat related as I can put in sleep mode and resume fine when very hot. (external monitor works fine too). Sometimes the screen works fine as if there is not a problem at all. Even after a reboot... This is random. Any ideas out there? If it is a bad part... which one? The LCD seems to be fine. What are the odds of 2 bad inverters? The backlight is fine. The LCD wires/ribbons seem to be fine. I am at a loss. No warranty left and Gateway tech support is clueless. Thanks for any feedback that might help.

  Read the article

• Please help with 'System.Data.DataRowView' does not contain a property with the name...

  - by Catalin

  My application works just fine until, in some unidentified conditions, it begins throwing this errors: When these errors start appearing, they appear in all over the application, no matter the code is built using ObjectDataSource or SqlDataSource. However, apparently, if the code uses some "classic", code-behind data-binding, that code does not throw errors (they do not show in the application event log), the page is displayed but it does not contain any data.... Please HELP tracking these very strange errors !!!!!! Here is the error log from the Event Viewer Exception information: Exception type: HttpUnhandledException Exception message: Exception of type 'System.Web.HttpUnhandledException' was thrown. Request information: Request URL: http://SITE/agsis/Default.aspx?tabid=1281&error=DataBinding5/7/2009 10:23:03 AMa+'System.Data.DataRowView'+does+not+contain+a+property+with+the+name+'DenumireMaterie'. Request path: /agsis/Default.aspx User host address: 299.299.299.299 ;) User: georgeta Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information: Thread ID: 1 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.errorpage_aspx.ProcessRequest(HttpContext context) at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) Here is the error log from my application: AssemblyVersion: 04.05.01 PortalID: 18 PortalName: Stiinte Economice UserID: 85 UserName: georgeta ActiveTabID: 1281 ActiveTabName: Plan Invatamant RawURL: /agsis/Default.aspx?tabid=1281&error=DataBinding%3a+'System.Data.DataRowView'+does+not+contain+a+property+with+the+name+'DenumireMaterie'. AbsoluteURL: /agsis/Default.aspx AbsoluteURLReferrer: http://SITE/agsis/Default.aspx?tabid=1281&ctl=Login&returnurl=%2fagsis%2fDefault.aspx%3ftabid%3d1281%26ctl%3dNotePlanSemestru%26mid%3d2801%26ID_PlanSemestru%3d518%26ID_PlanInvatamant%3d304%26ID_FC%3d206%26ID_FCForma%3d85%26ID_Domeniu%3d418%26ID_AnStudiu%3d7%26ID_Specializare%3d6522%26ID_AnUniv%3d27 UserAgent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR={8C326639-C677-4045-B6D9-F59C330790E7}) DefaultDataProvider: DotNetNuke.Data.SqlDataProvider, DotNetNuke.SqlDataProvider ExceptionGUID: c56dc33e-973f-467a-a90d-2a8fc7193aec InnerException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ID_PlanInvatamant'. FileName: FileLineNumber: 0 FileColumnNumber: 0 Method: System.Web.UI.DataBinder.GetPropertyValue StackTrace: Message: DotNetNuke.Services.Exceptions.PageLoadException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ID_PlanInvatamant'. --- System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ID_PlanInvatamant'. at System.Web.UI.DataBinder.GetPropertyValue(Object container, String propName) at System.Web.UI.WebControls.GridView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding) at System.Web.UI.WebControls.CompositeDataBoundControl.PerformDataBinding(IEnumerable data) at System.Web.UI.WebControls.GridView.PerformDataBinding(IEnumerable data) at System.Web.UI.WebControls.DataBoundControl.OnDataSourceViewSelectCallback(IEnumerable data) at System.Web.UI.WebControls.DataBoundControl.PerformSelect() at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- Source: Server Name: SERVER2 Thank you, Catalin

  Read the article

• ASP.NET web forms as ASP.NET MVC

  - by lopkiju

  I am sorry for possible misleading about the title, but I have no idea for a proper title. Feel free to edit. Anyway, I am using ASP.NET Web Forms, and maybe this isn't how web forms is intended to be used, but I like to construct and populate HTML elements manually. It gives me more control. I don't use DataBinding and that kind of stuff. I use SqlConnection, SqlCommand and SqlDataReader, set SQL string etc. and read the data from the DataReader. Old school if you like. :) I do create WebControls so that I don't have to copy-paste every time I need some control, but mostly, I need WebControls to render as HTML so I can append that HTML into some other function that renders the final output with the control inside. I know I can render a control with control.RenderControl(writer), but this can only be done in (pre)Render or RenderContents overrides. For example. I have a dal.cs file where is stored all static functions and voids that communicate with the database. Functions mostly return string so that it can be appended into some other function to render the final result. The reason I am doing like this is that I want to separate the coding from the HTML as much as I can so that I don't do <% while (dataReader.Read()) % in HTML and display the data. I moved this into a CodeBehind. I also use this functions to render in the HttpHandler for AJAX response. That works perfectly, but when I want to add a control (ASP.NET Server control (.cs extension, not .ascx)) I don't know how to do that, so I see my self writing the same control as function that returns string or another function inside that control that returns string and replaces a job that would RenderContents do, so that I can call that function when I need control to be appended into a another string. I know this may not be a very good practice. As I see all the tutorials/videos about the ASP.NET MVC, I think it suite my needs as with the MVC you have to construct everything (or most of it) by your self, which I am already doing right now with web forms. After this long intro, I want to ask how can I build my controls so I can use them as I mentioned (return string) or I have to forget about server controls and build the controls as functions and used them that way? Is that even possible with ASP.NET Server Controls (.cs extension) or am I right when I said that I am not using it right. To be clear, I am talking about how to properly use a web forms, but to avoid data binders because I want to construct everything by my self (render HTML in Code Behind). Someone might think that I am appending strings like "some " + "string", which I am not. I am using StringBuilder for that so there's no slowness. Every opinion is welcome.

  Read the article

• What is a good layout for a somewhat advanced home network and storage solution?

  - by Shaun

  My home network/storage needs are changing and I am searching for some opinions and starting points on what a good network/storage layout would be that can serve my needs for a few years into the future. I think I have a decent starting point for equipment, but I am also willing to invest fairly heavily in a solution that can last me for a while. I am a bit of a tech nerd and I have a moderate tolerance for setup of the solution. I would prefer if maintenance of the system is somewhat low once it is setup, but I am willing to accept some tradeoffs. Existing equipment: Router - Netgear WNDR3700 (gigabit) Router - DLink Gamerlounge DGL-4300 (gigabit) Switch - 16 port Trendnet green switch (gigabit) Switch - 5 port Trendnet green (gigabit) Computer - i7-950 office computer (gigabit ethernet) Computer - Q6600 quad core media center, hooked up to TV, records shows (gigabit ethernet) Computer - Acer 1810T ultraportable laptop (gigabit and N ethernet) NAS - Intel SS4200-E (gigabit) External hard drive - 2TB WD Green drive (esata) All kinds of miscellaneous network connected TV, Bluray, Verizon network extender, HDhomerun TV tuners, etc. Requirements: -Robust backup solution for a growing collection of huge family picture files and personal files, around 1.5TB. (Including offsite backup) -Central location for all user's files, while also keeping them secure from each other. -Storage for terabytes of movie backups and recorded TV, and access to them from all computers (maybe around 4TB eventually) -Possibility to host files to friends and family easily Nice to have: -Backup of terabytes of movie backups Intriguing possibilities: -Capability to have users' Windows desktops and files look the same from all network computers I am not sure if the new Windows Home Server 2011 would fit into this well, if I need a domain server, how best to organize my backups, or how to most effectively use RAID. Currently I am simply backing up all computers to a RAID 1 on the NAS box, which I was thinking could prevent a situation where I reach for a backup and find that the disk is corrupt. One possibility that I am thinking about now is simply using my media center PC with a huge RAID of hard drives on which all files are stored. Pseudo-backup of all files would be present because of the RAID, but important files would also be backed up off site via carrying hard drives to work. But what if corruption seeps into the files and the corrupted data is then backed up? Does RAID protect against this? I really want to take next to zero risks with the irreplaceable files. I can handle some degree of risk with the movies and other files. I'm looking for critiques on this idea as well as other possibilities. To summarize, my goal is high functionality, media capable, and robust backup of irreplaceable files.

  Read the article

• Whats wrong with my triple DES wrapper??

  - by Chen Kinnrot

  it seems that my code adds 6 bytes to the result file after encrypt decrypt is called.. i tries it on a mkv file.. please help here is my code class TripleDESCryptoService : IEncryptor, IDecryptor { public void Encrypt(string inputFileName, string outputFileName, string key) { EncryptFile(inputFileName, outputFileName, key); } public void Decrypt(string inputFileName, string outputFileName, string key) { DecryptFile(inputFileName, outputFileName, key); } static void EncryptFile(string inputFileName, string outputFileName, string sKey) { var outFile = new FileStream(outputFileName, FileMode.OpenOrCreate, FileAccess.ReadWrite); // The chryptographic service provider we're going to use var cryptoAlgorithm = new TripleDESCryptoServiceProvider(); SetKeys(cryptoAlgorithm, sKey); // This object links data streams to cryptographic values var cryptoStream = new CryptoStream(outFile, cryptoAlgorithm.CreateEncryptor(), CryptoStreamMode.Write); // This stream writer will write the new file var encryptionStream = new BinaryWriter(cryptoStream); // This stream reader will read the file to encrypt var inFile = new FileStream(inputFileName, FileMode.Open, FileAccess.Read); var readwe = new BinaryReader(inFile); // Loop through the file to encrypt, line by line var date = readwe.ReadBytes((int)readwe.BaseStream.Length); // Write to the encryption stream encryptionStream.Write(date); // Wrap things up inFile.Close(); encryptionStream.Flush(); encryptionStream.Close(); } private static void SetKeys(SymmetricAlgorithm algorithm, string key) { var keyAsBytes = Encoding.ASCII.GetBytes(key); algorithm.IV = keyAsBytes.Take(algorithm.IV.Length).ToArray(); algorithm.Key = keyAsBytes.Take(algorithm.Key.Length).ToArray(); } static void DecryptFile(string inputFilename, string outputFilename, string sKey) { // The encrypted file var inFile = File.OpenRead(inputFilename); // The decrypted file var outFile = new FileStream(outputFilename, FileMode.OpenOrCreate, FileAccess.ReadWrite); // Prepare the encryption algorithm and read the key from the key file var cryptAlgorithm = new TripleDESCryptoServiceProvider(); SetKeys(cryptAlgorithm, sKey); // The cryptographic stream takes in the encrypted file var encryptionStream = new CryptoStream(inFile, cryptAlgorithm.CreateDecryptor(), CryptoStreamMode.Read); // Write the new unecrypted file var cleanStreamReader = new BinaryReader(encryptionStream); var cleanStreamWriter = new BinaryWriter(outFile); cleanStreamWriter.Write(cleanStreamReader.ReadBytes((int)inFile.Length)); cleanStreamWriter.Close(); outFile.Close(); cleanStreamReader.Close(); } }

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• i had problem in adding the additional content in my pdf

  - by Ayyappan.Anbalagan

  I am converting my data set into a pdf document.My data set contains the product bill details.So,at the top of the pdf i need to added some more content like "my company name & address customer name, date of bill,bill no" Below code i am using to convert into pdf. public static void Exportdata(DataTable dataTable, HttpResponse Response, int val) { //String filename = String.Concat(name, "-", DateTime.Today.Day.ToString(), "/", DateTime.Today.Month.ToString(), "/", DateTime.Today.Year.ToString(), ".pdf"); Document pdfDoc = new Document(PageSize.A4, 30, 30, 40, 25); System.IO.MemoryStream mStream = new System.IO.MemoryStream(); PdfWriter writer = PdfWriter.GetInstance(pdfDoc, mStream); //int cols = 0; //int rows = 0; int cols = dataTable.Columns.Count; int rows = dataTable.Rows.Count; pdfDoc.Open(); iTextSharp.text.Table pdfTable = new iTextSharp.text.Table(cols, rows); pdfTable.BorderWidth = 1; pdfTable.Width = 100; pdfTable.Padding = 1; pdfTable.Spacing = 1; //creating table headers for (int i = 0; i < cols; i++) { Cell cellCols = new Cell(); Font ColFont = FontFactory.GetFont(FontFactory.HELVETICA, 8, Font.BOLD); Chunk chunkCols = new Chunk(dataTable.Columns[i].ColumnName, ColFont); cellCols.Add(chunkCols); pdfTable.AddCell(cellCols); } //creating table data (actual result) for (int k = 0; k < rows; k++) { for (int j = 0; j < cols; j++) { Cell cellRows = new Cell(); Font RowFont = FontFactory.GetFont(FontFactory.HELVETICA, 6); Chunk chunkRows = new Chunk(dataTable.Rows[k][j].ToString(), RowFont); cellRows.Add(chunkRows); pdfTable.AddCell(cellRows); } } pdfDoc.Add(pdfTable); pdfDoc.Close(); Response.ContentType = "application/octet-stream"; if (val == 1) { Response.AddHeader("Content-Disposition", "attachment; filename=Users.pdf"); } else if (val == 2) { Response.AddHeader("Content-Disposition", "attachment; filename=Customers.pdf"); } else if (val == 3) { Response.AddHeader("Content-Disposition", "attachment; filename=Materials.pdf"); } else { Response.AddHeader("Content-Disposition", "attachment; filename=Reports.pdf"); } Response.Clear(); Response.BinaryWrite(mStream.ToArray()); //Response.Write(mStream.ToString()); HttpContext.Current.ApplicationInstance.CompleteRequest(); Response.End(); }

  Read the article

• Perl Moose::Util::TypeConstraints bug ? what is this error about the name has invalid chars ?

  - by alex8657

  That has been hours i am tracking a Moose::Util::TypeConstraints exceptions, i don't understand where it gets to check a type and tells me that the name is incorrect. I tracked the error to a reduced example to try to locate the problem, and it just shows me that i do not get it. Did i get to a Moose::Util::TypeConstraints bug ? aoffice:new alex$ perl -c ../codesnippets/typeconstrainterror.pl ../codesnippets/typeconstrainterror.pl syntax OK aoffice:new alex$ perl -d ../codesnippets/typeconstrainterror.pl (...) DB<1> r Something::File::LocalFile=HASH(0x100d1bfa8) contains invalid characters for a type name. Names can contain alphanumeric character, ":", and "." at /opt/local/lib/perl5/vendor_perl/5.10.1/darwin-multi-2level/Moose/Util/TypeConstraints.pm line 508 Moose::Util::TypeConstraints::_create_type_constraint('Something::File::LocalFile=HASH(0x100d1bfa8)', undef, undef, undef, undef) called at /opt/local/lib/perl5/vendor_perl/5.10.1/darwin-multi-2level/Moose/Util/TypeConstraints.pm line 285 Moose::Util::TypeConstraints::type('Something::File::LocalFile=HASH(0x100d1bfa8)') called at ../codesnippets/typeconstrainterror.pl line 7 Something::File::is_slink('Something::File::LocalFile=HASH(0x100d1bfa8)') called at ../codesnippets/typeconstrainterror.pl line 33 Debugged program terminated. Use q to quit or R to restart, use o inhibit_exit to avoid stopping after program termination, h q, h R or h o to get additional info. Below, the code that crashes: package Something::File; use Moose; has 'type' =>(is=>'ro', isa=>'Str', writer=>'_set_type' ); sub is_slink { my $self = shift; return ( $self->type eq 'slink' ); } no Moose; __PACKAGE__->meta->make_immutable; 1; package Something::File::LocalFile; use Moose; use Moose::Util::TypeConstraints; extends 'Something::File'; subtype 'PositiveInt' => as 'Int' => where { $_ >0 } => message { 'Only positive greater than zero integers accepted' }; no Moose; __PACKAGE__->meta->make_immutable; 1; my $a = Something::File::LocalFile->new; # $a->_set_type('slink'); print $a->is_slink ." end\n";

  Read the article

• The Koyal Group Info Mag News¦Charged building material could make the renewable grid a reality

  - by Chyler Tilton

  What if your cell phone didn’t come with a battery? Imagine, instead, if the material from which your phone was built was a battery. The promise of strong load-bearing materials that can also work as batteries represents something of a holy grail for engineers. And in a letter published online in Nano Letters last week, a team of researchers from Vanderbilt University describes what it says is a breakthrough in turning that dream into an electrocharged reality. The researchers etched nanopores into silicon layers, which were infused with a polyethylene oxide-ionic liquid composite and coated with an atomically thin layer of carbon. In doing so, they created small but strong supercapacitor battery systems, which stored electricity in a solid electrolyte, instead of using corrosive chemical liquids found in traditional batteries. These supercapacitors could store and release about 98 percent of the energy that was used to charge them, and they held onto their charges even as they were squashed and stretched at pressures up to 44 pounds per square inch. Small pieces of them were even strong enough to hang a laptop from—a big, fat Dell, no less. Although the supercapacitors resemble small charcoal wafers, they could theoretically be molded into just about any shape, including a cell phone’s casing or the chassis of a sedan. They could also be charged—and evacuated of their charge—in less time than is the case for traditional batteries. “We’ve demonstrated, for the first time, the simple proof-of-concept that this can be done,” says Cary Pint, an assistant professor in the university’s mechanical engineering department and one of the authors of the new paper. “Now we can extend this to all kinds of different materials systems to make practical composites with materials specifically tailored to a host of different types of applications. We see this as being just the tip of a very massive iceberg.” Pint says potential applications for such materials would go well beyond “neat tech gadgets,” eventually becoming a “transformational technology” in everything from rocket ships to sedans to home building materials. “These types of systems could range in size from electric powered aircraft all the way down to little tiny flying robots, where adding an extra on-board battery inhibits the potential capability of the system,” Pint says. And they could help the world shift to the intermittencies of renewable energy power grids, where powerful batteries are needed to help keep the lights on when the sun is down or when the wind is not blowing. “Using the materials that make up a home as the native platform for energy storage to complement intermittent resources could also open the door to improve the prospects for solar energy on the U.S. grid,” Pint says. “I personally believe that these types of multifunctional materials are critical to a sustainable electric grid system that integrates solar energy as a key power source.”

  Read the article

• Merging two XML files into one XML file using Java

  - by dmurali

  I am stuck with how to proceed with combining two different XML files(which has the same structure). When I was doing some research on it, people say that XML parsers like DOM or StAX will have to be used. But cant I do it with the regular IOStream? I am currently trying to do with the help of IOStream but this is not solving my purpose, its being more complex. For example, What I have tried is; public class GUI { public static void main(String[] args) throws Exception { // Creates file to write to Writer output = null; output = new BufferedWriter(new FileWriter("C:\\merged.xml")); String newline = System.getProperty("line.separator"); output.write(""); // Read in xml file 1 FileInputStream in = new FileInputStream("C:\\1.xml"); BufferedReader br = new BufferedReader(new InputStreamReader(in)); String strLine; while ((strLine = br.readLine()) != null) { if (strLine.contains("<MemoryDump>")){ strLine = strLine.replace("<MemoryDump>", "xmlns:xsi"); } if (strLine.contains("</MemoryDump>")){ strLine = strLine.replace("</MemoryDump>", "xmlns:xsd"); } output.write(newline); output.write(strLine); System.out.println(strLine); } // Read in xml file 2 FileInputStream in = new FileInputStream("C:\\2.xml"); BufferedReader br1 = new BufferedReader(new InputStreamReader(in)); String strLine1; while ((strLine1 = br1.readLine()) != null) { if (strLine1.contains("<MemoryDump>")){ strLine1 = strLine1.replace("<MemoryDump>", ""); } if (strLine1.contains("</MemoryDump>")){ strLine1 = strLine1.replace("</MemoryDump>", ""); } output.write(newline); output.write(strLine1); I request you to kindly let me know how do I proceed with merging two XML files by adding additional content as well. It would be great if you could provide me some example links as well..! Thank You in Advance..! System.out.println(strLine1); } }

  Read the article

• Amusing or Sad? Network Solutions

  - by dbasnett

  When I got sick my email ended up in every drug sellers email list. Some days I get over 200 emails selling everything from Viagra to Xanax. Either they don't know what my condition is or they are telling me you are a goner, might as well chill-ax and have a good time. In order to cut down on the mail being downloaded I thought I would add all of the Junk email senders from Outlook to my Network Solution mail server. Much to my amazement I could not find that import Spammers button, so I submitted a tech support request. Here is the response: Thank you for contacting Network Solutions Customer Service Department. We are committed to creating the best Customer experience possible. One of the first ways we can demonstrate our commitment to this goal is to quickly and efficiently handle your recent request. We apologize for any inconvenience this might have caused you. With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers. An alternative option is for you to create a Custom Filter that filters unwanted e-mails. To create a Custom Filter: Open a Web browser (e.g., Netscape, Microsoft Internet Explorer, etc.). Type mail.[domain name].[ext] in the address line. Login to your Network Solutions email account. Click on the Configuration left menu tab. Click on the Custom Filter link. Type the rule name. blah, blah, blah Basically add them one at a time. "We are committed to creating the best Customer experience possible." No you are not. You are trying to squeeze every nickle you can out of me. "With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers." Maybe I should apply for a job to write those ten complicated lines of code... Maybe I should question my choice of vendors, because if they truly "cannot" then they are to stupid to have my business. It is both amusing and sad. I'll be posting this in every forum I am a member of.

  Read the article

• migrating an embedded jetty server from v6 to v7

  - by Ceilingfish

  Hi chaps, I have an embedded servlet which I use in unit tests, looks like this: public class UnitTestWebservices extends AbstractHandler { private Server server; private Map<Route,String> data = new HashMap<Route,String>(); public UnitTestWebservices(int port) throws Exception { server = new Server(port); server.setHandler(this); server.start(); } public void handle(String url, HttpServletRequest request, HttpServletResponse response, int arg3) throws IOException, ServletException { final Route route = Route.valueOf(request.getMethod(), url); final String content = data.get(route); if(content != null) { final ServletOutputStream stream = response.getOutputStream(); stream.print(content); stream.flush(); stream.close(); } else { response.sendError(HttpServletResponse.SC_NOT_FOUND); } } .... } That's written using version 6.1.24 of Jetty. I tried switching over to use Jetty 7.1.1.v20100517, and updated that code to this: public class UnitTestWebservices extends AbstractHandler { private Server server; private Map<Route,String> data = new HashMap<Route,String>(); public UnitTestWebservices(int port) throws Exception { server = new Server(port); server.setHandler(this); server.start(); } public void handle(String url, Request request, HttpServletRequest servletRequest, HttpServletResponse response) throws IOException, ServletException { final Route route = Route.valueOf(request.getMethod(), url); final String content = data.get(route); request.setHandled(true); response.setContentType("application/json"); if(content != null) { response.setStatus(HttpServletResponse.SC_OK); final Writer stream = response.getWriter(); stream.append(content); } else { response.sendError(HttpServletResponse.SC_NOT_FOUND); } } } But whenever I tried to access make a request to the server it would hang indefinitely. Has anyone experienced anything similar?. It also printed this into the log: log4j:WARN No appenders could be found for logger (org.eclipse.jetty.util.log). log4j:WARN Please initialize the log4j system properly. org.eclipse.jetty.server.Server@670655dd STOPPED +-UnitTestWebservices@50ef5502 started

  Read the article

• Win XP error 0x80041003 using GetObject/winmgmts

  - by John Lewis

  My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub Update: Thanks for your reply. The line breaks seem to have been introduced in the process of paasting into this form. Well spotted - I was using a PDF file name "ascii". I added a .pdf extension but still get the error. I suspect you're right that it's to do with admin rights. Here's more about the setup and what I'm trying to achieve. Win2pdf is a product for writing PDFs by works by simulating a Windows printer. You "print" the page, select win2pdf in the print dialog and it then asks for a file name. I have it installed on my pc (called Neil) and it works fine in this conventional way. My aim is to write an html page to a PDF file using win2pdf - but via ASP/vbscript/javascript rather than with manual intervention. The script for doing this was provided by win2PDF's tech support but when it did not work, that was the limit of their understanding. In the sample script the file ascii.asp just produces a table of ascii codes/characters. The URL given is on my own PC which has IIS set up to run scripts which it does fine. The error I get occurs on about the fourth line executed. I am logged in with full admin rights - I think! But I'm no expert. I hope this helps to give some more specific suggestions about how to check/fix the admin rights.

  Read the article

• IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well.

  - by Thomas

  Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

  Read the article

• i had problem in adding the additional content in my pdf...using asp.net c#

  - by Ayyappan.Anbalagan

  I am converting my data set into a pdf document.My data set contains the product bill details.So,at the top of the pdf i need to added some more content like "my company name & address customer name, date of bill,bill no" Below code i am using to convert into pdf. public static void Exportdata(DataTable dataTable, HttpResponse Response, int val) { //String filename = String.Concat(name, "-", DateTime.Today.Day.ToString(), "/", DateTime.Today.Month.ToString(), "/", DateTime.Today.Year.ToString(), ".pdf"); Document pdfDoc = new Document(PageSize.A4, 30, 30, 40, 25); System.IO.MemoryStream mStream = new System.IO.MemoryStream(); PdfWriter writer = PdfWriter.GetInstance(pdfDoc, mStream); //int cols = 0; //int rows = 0; int cols = dataTable.Columns.Count; int rows = dataTable.Rows.Count; pdfDoc.Open(); iTextSharp.text.Table pdfTable = new iTextSharp.text.Table(cols, rows); pdfTable.BorderWidth = 1; pdfTable.Width = 100; pdfTable.Padding = 1; pdfTable.Spacing = 1; //creating table headers for (int i = 0; i < cols; i++) { Cell cellCols = new Cell(); Font ColFont = FontFactory.GetFont(FontFactory.HELVETICA, 8, Font.BOLD); Chunk chunkCols = new Chunk(dataTable.Columns[i].ColumnName, ColFont); cellCols.Add(chunkCols); pdfTable.AddCell(cellCols); } //creating table data (actual result) for (int k = 0; k < rows; k++) { for (int j = 0; j < cols; j++) { Cell cellRows = new Cell(); Font RowFont = FontFactory.GetFont(FontFactory.HELVETICA, 6); Chunk chunkRows = new Chunk(dataTable.Rows[k][j].ToString(), RowFont); cellRows.Add(chunkRows); pdfTable.AddCell(cellRows); } } pdfDoc.Add(pdfTable); pdfDoc.Close(); Response.ContentType = "application/octet-stream"; if (val == 1) { Response.AddHeader("Content-Disposition", "attachment; filename=Users.pdf"); } else if (val == 2) { Response.AddHeader("Content-Disposition", "attachment; filename=Customers.pdf"); } else if (val == 3) { Response.AddHeader("Content-Disposition", "attachment; filename=Materials.pdf"); } else { Response.AddHeader("Content-Disposition", "attachment; filename=Reports.pdf"); } Response.Clear(); Response.BinaryWrite(mStream.ToArray()); //Response.Write(mStream.ToString()); HttpContext.Current.ApplicationInstance.CompleteRequest(); Response.End(); }

  Read the article

• Bidirectional FIFO

  - by nunos

  I would like to implement a bidirectional fifo. The code below is functioning but it is not using bidirectional fifo. I have searched all over the internet, but haven't found any good example... How can I do that? Thanks, WRITER.c: #include <stdio.h> #include <unistd.h> #include <string.h> #include <sys/types.h> #include <sys/wait.h> #include <fcntl.h> #define MAXLINE 4096 #define READ 0 #define WRITE 1 int main (int argc, char** argv) { int a, b, fd; do { fd=open("/tmp/myfifo",O_WRONLY); if (fd==-1) sleep(1); } while (fd==-1); while (1) { scanf("%d", &a); scanf("%d", &b); write(fd,&a,sizeof(int)); write(fd,&b,sizeof(int)); if (a == 0 && b == 0) { break; } } close(fd); return 0; } READER.c: #include <stdio.h> #include <unistd.h> #include <string.h> #include <sys/types.h> #include <sys/wait.h> #include <fcntl.h> #include <sys/stat.h> #define MAXLINE 4096 #define READ 0 #define WRITE 1 int main(void) { int n1, n2; int fd; mkfifo("/tmp/myfifo",0660); fd=open("/tmp/myfifo",O_RDONLY); while(read(fd, &n1, sizeof(int) )) { read(fd, &n2, sizeof(int)); if (n1 == 0 && n2 == 0) { break; } printf("soma: %d\n",n1+n2); printf("diferenca: %d\n", n1-n2); printf("divisao: %f\n", n1/(double)n2); printf("multiplicacao: %d\n", n1*n2); } close(fd); return 0; }

  Read the article

• upgrading from MVC4 to MVC5 pre-Release

  - by Jack M

  I have made that dreadful error of upgrading from MVC4 to MVC5 pre-release by updating the razor, and mvc webpage in my references I have System.Web.Mvc, System.Web.Webpages, System.Web.Webpages.Razor and System.Web.Razor as version v4.0.30319, when I run my application I get [A]System.Web.WebPages.Razor.Configuration.HostSection cannot be cast to [B]System.Web.WebPages.Razor.Configuration.HostSection. Type A originates from 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' in the context 'Default' at location 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Razor\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Razor.dll'. Type B originates from 'System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' in the context 'Default' at location 'C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\membership\c70f06fe\9163b1ca\assembly\dl3\291c956e\73c25daa_cf74ce01\System.Web.WebPages.Razor.dll'. is this the same as http://www.asp.net/whitepapers/mvc4-release-notes Thanks Adding a stacktrace: [InvalidCastException: [A]System.Web.WebPages.Razor.Configuration.HostSection cannot be cast to [B]System.Web.WebPages.Razor.Configuration.HostSection. Type A originates from 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' in the context 'Default' at location 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Razor\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Razor.dll'. Type B originates from 'System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' in the context 'Default' at location 'C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\c70f06fe\9163b1ca\assembly\dl3\291c956e\73c25daa_cf74ce01\System.Web.WebPages.Razor.dll'.] System.Web.WebPages.Razor.WebRazorHostFactory.CreateHostFromConfig(String virtualPath, String physicalPath) +193 System.Web.WebPages.Razor.RazorBuildProvider.GetHostFromConfig() +51 System.Web.WebPages.Razor.RazorBuildProvider.CreateHost() +24 System.Web.WebPages.Razor.RazorBuildProvider.get_Host() +34 System.Web.WebPages.Razor.RazorBuildProvider.EnsureGeneratedCode() +85 System.Web.WebPages.Razor.RazorBuildProvider.get_CodeCompilerType() +34 System.Web.Compilation.BuildProvider.GetCompilerTypeFromBuildProvider(BuildProvider buildProvider) +189 System.Web.Compilation.BuildProvidersCompiler.ProcessBuildProviders() +265 System.Web.Compilation.BuildProvidersCompiler.PerformBuild() +21 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath virtualPath) +580 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) +571 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) +203 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean throwIfNotFound) +249 System.Web.Compilation.BuildManager.GetCompiledType(VirtualPath virtualPath) +17 System.Web.Mvc.BuildManagerCompiledView.Render(ViewContext viewContext, TextWriter writer) +90 System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) +380 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilterRecursive(IList`1 filters, Int32 filterIndex, ResultExecutingContext preContext, ControllerContext controllerContext, ActionResult actionResult) +109 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilterRecursive(IList`1 filters, Int32 filterIndex, ResultExecutingContext preContext, ControllerContext controllerContext, ActionResult actionResult) +890 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) +97 System.Web.Mvc.Async.<>c__DisplayClass1e.<BeginInvokeAction>b__1b(IAsyncResult asyncResult) +241 System.Web.Mvc.Controller.<BeginExecuteCore>b__1d(IAsyncResult asyncResult, ExecuteCoreState innerState) +29 System.Web.Mvc.Async.WrappedAsyncVoid`1.CallEndDelegate(IAsyncResult asyncResult) +111 System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +53 System.Web.Mvc.Async.WrappedAsyncVoid`1.CallEndDelegate(IAsyncResult asyncResult) +19 System.Web.Mvc.MvcHandler.<BeginProcessRequest>b__4(IAsyncResult asyncResult, ProcessRequestState innerState) +51 System.Web.Mvc.Async.WrappedAsyncVoid`1.CallEndDelegate(IAsyncResult asyncResult) +111 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +606 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +288

  Read the article

• Zend database query result converts column values to null

  - by David Zapata

  Hi again. I am using the next instructions to get some registers from my Database. Create the needed models (from the params module): $obj_paramtype_model = new Params_Model_DbTable_Paramtype(); $obj_param_model = new Params_Model_DbTable_Param(); Getting the available locales from the database // This returns a Zend_Db_Table_Row_Abstract class object $obj_paramtype = $obj_paramtype_model->getParamtypeByValue('available_locales'); // This is a query used to add conditions to the next sentence. This is executed from the Params_Model_DbTable_Param instance class, that depends from Params_Model_DbTable_Paramtype class (reference map and dependentTables arrays are fine in both classes) $obj_select = $this->select()->where('deleted_at IS NULL')->order('name'); // Execute the next query, applying the select restrictions. This returns a Zend_Db_Table_Rowset_Abstract class object. This means "Find Params by Paramtype" $obj_params_rowset = $obj_paramtype->findDependentRowset('Params_Model_DbTable_Param', 'Paramtype', $obj_paramtype); // Here the firebug log displays the queries.... Zend_Registry::get('log')->debug($obj_params_rowset); I have a profiler for all my DB executions from Zend. At this point the log and profiler objects (that includes Firebug writers), shows the executed SQL Queries, and the last line displays the resulting Zend_Db_Table_Rowset_Abstract class object. If I execute the SQL Queries in some MySQL Client, the results are as expected. But the Zend Firebug log writer displays as NULL the column values with latin characters (ñ). In other words, the external SQL client shows es_CO | Español de Colombia and en_US | English of United States but the Query results from Zend displays (and returns) es_CO | null and en_US | English of United States. I've deleted the ñ character from Español de Colombia and the query results are just fine in my Zend Log Firebug screen, and in the final Zend Form element. The MySQL database, tables and columns are in UTF-8 - utf8_unicode_ci collation. All my zend framework pages are in UTF-8 charset. I'm using XAMPP 1.7.1 (PHP 5.2.9, Apache at port 90 and MySQL 5.1.33-community) running on Windows 7 Ultimate; Zend Framework 1.10.1. I'm sorry if there is so much information, but I don't really know why could that happen, so I tryed to provide as much related information as I could to help to find some answer.

  Read the article

• PDF Corruption When Sending with Microsoft Products

  - by Winner

  I have the same PDF corruption problem in two different offices that I am the tech support for. Office 1: Started in the middle of December. PDF received from outside the office and is viewable with no problems. I have no control over how it is created. If it is forwarded to anyone else, the PDF is corrupted. I have forwarded it to multiple people in the office. I have tried viewing with Reader 8, 9, Sumatra and Fox IT. I have tried forwarding to Gmail and their viewer says it is corrupted. If I save the PDF and create a new email, it will be corrupted when sent using Outlook 2003, Outlook 2007, Microsoft Live Mail and Outlook Express. If I create the email using Thunderbird 3, Gmail or the webclient Iclient for IPSwitch IMail it will not be corrupted. I have confirmed the same results when using our IMail SMTP and also Using Gmail as the SMTP server. To be clear, if I created in Thunderbird, Gmail or Iclient and received on any of the MS products, it will be viewable. This office receives PDFs daily from multiple sources. There is only a small subset that are having this problem. So far they problem PDFs are from two different companies they deal with, but not all of the PDFs are bad. Office 2: PDFs are created by a management system. I'm not sure what engine is used to create them. Same exact same issues. At both offices, I noticed that the file size is wrong. One small PDF the proper file size is 12kb for the PDF when it's viewable, when it shows up corrupted it is only 8kb. We handle the email for both offices. Both are POP servers, not Exchange. IMail was updated after these issues start. I have tried different SMTP servers and it still seems to happen only when using Microsoft products to send. Anyone else having problems with PDFs getting corrupted? Any ideas how to find out a resolution?

  Read the article

• IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well

  - by Thomas

  Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

  Read the article

• How do access a secure website within a sharepoint webpart?

  - by Bill

  How do access a secure website within a sharepoint webpart? The following code works fine as a console application but if you run it in a webpart, you will get a access violation WebRequest request = WebRequest.Create("https://somesecuresite.com"); WebResponse firstResponse = null; try { firstResponse = request.GetResponse(); } catch (WebException ex) { writer.WriteLine("Error: " + ex.ToString()); return; } if you access a non secure site, it also works. Any ideas? Error: System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive. --- System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at System.Net.UnsafeNclNativeMethods.NativePKI.CertVerifyCertificateChainPolicy(IntPtr policy, SafeFreeCertChain chainContext, ChainPolicyParameter& cpp, ChainPolicyStatus& ps) at System.Net.PolicyWrapper.VerifyChainPolicy(SafeFreeCertChain chainContext, ChainPolicyParameter& cpp) at System.Net.Security.SecureChannel.VerifyRemoteCertificate(RemoteCertValidationCallback remoteCertValidationCallback) at System.Net.Security.SslState.CompleteHandshake() at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >