Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 1108/1211 | < Previous Page | 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115  | Next Page >

• no administrator password for Windows 7

  - by huskergirl78

  I'm a secretary and my boss set up my new Windows 7 OptiPlex 7010 (Dell) computer for me while I was on vacation (he does not remember setting any "administrator" password). We are a small office so there is no system password set, either. I've used it for 6 months, all the while I couldn't access network drives, etc., without an administrator password. It was annoying, but I could still get my work done. Finally, on a slow day I took it upon myself to "fix" the problem, and in all my infinite wisdom, I managed to change my user account from administrator to standard user, so now I really can't do anything. I can't download or install any programs, move or rename files, etc. I tried the Dell suggested solution, but the BIOS tells me there is no password set, so it has to be a Windows 7 problem. All the solutions I have come across require an administrator password to let me do them. What can I do to find out the admin password so I can use my own darn computer!? Is there a default admin password?

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• Slow connection to Linux MySQL from Windows only (XAMPP)

  - by Josh

  I'm having a problem with a PHP project (using Kohana 3.2 framework) on my Windows 7 64-bit machine connecting to the database. The development database is stored on a Ubuntu Linux server on the local network. Other development machines running OSX and Linux are connecting fine. There are no other Windows development machines to test with. I can access MySQL fine using MySQL Workbench, and other projects (which I believe to be less database heavy) run mostly ok, only occasionally getting timeout messages. I'm constantly getting Maximum execution time of 30 seconds exceeded when functions such as mysql_query() are run in this particular project. Specifically, the Kohana file where the timeout occurs is MODPATH\database\classes\kohana\database\mysql.php [ 186 ]. My local set-up is: Windows 7 Professional 64bit XAMPP 1.7.7 (PHP 5.3.8) The output of uname -a of the Linux server is: Linux peach 2.6.38-11-server #50-Ubuntu SMP Mon Sep 12 21:34:27 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux I've tried the following, with no success: Disabling Windows firewall Switching between using a persistant and normal connection In my.cnf, adding skip-name-resolve Increasing wait_timeout Enabling bind-address I've run out of ideas now, and have no idea how to debug an odd issue like this. Has anyone come across this before, or have any idea how I could find the root of the issue, or what might be the problem?

  Read the article

• Connection between Asp.Net and Oracle 10g Express Edition

  - by l3gion

  Hello, I'm struggling to find a way to connect my Asp .Net + C# application with my Oracle 10g Express Edition. Here's my scenario, I'm at Mac OS and I have 2 Virtual machines, one for Win 7 (VS 2010 app) and another with a Parallels Virtual Appliance with Oracle 10g Express Edition 1.1. Which provider (Oledb, ODP.NET, etc..) should I use? How to make the connection to the server in C#? Right now I have this: <appSettings> <add key="conn" value="Data Source=10.211.55.11;Persist Security Info=True;User ID=l3gion;Password=l3gion;" /> </appSettings> And at the .cs file: SqlCommand cmd = new SqlCommand("insert_thing", new SqlConnection(ConfigurationManager.AppSettings["conn"])); cmd.CommandType = CommandType.StoredProcedure; *insert_thing is a stored procedure Using this I got this error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I've searched for some possible solutions. Tried some, including: firewall disabled, allow remote connection at oracle express edition using this cmd line ("EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);").. The error persists. Can anyone guide me into the right direction? I'm a newbie with this type of things. Thank you for your patience. regards

  Read the article

• How to implement a virtual server running Ubuntu inside a fileserver in windows?

  - by user541445

  I work in a company that has some limitations regarding their budget. They need client/server aplication. I can code the aplication, I've made mini tests on primordial applications that work. The thing is that they only have fileservers, and the application they need must be concurrent compliant, so the database must be in their local network (Fileserver is the only choice). So far, I have explored almost any option available, starting with: Desktop databases. Access (We have a license)(But concurreny is just not effective, besides it's a windows software, yuck). Sqlite (Nice, but since the information they manage is a lot, I've performed some concurrency tests with INSERTs and doing SELECTS at the same time). It fails, somehow it just stops inserting. Open office Base (I dismember a base office only to see that it was a file mode HSQLDB). I've tried, not concurrent at all. Etc (You name the Open source Desktop Database manager, and yes, I've tried that one.) Server databases Call me a stubborn person, but reading some server databases documentation say that their databases will work in a file mode. I've tried a lot of products. Postgres, MySQL, FireBird, H2, Derby, Oracle Express, IBM DB2 Express, etc. So, I really need a hand here, I've been doing this install/delete/depression thing with a lot of databases for 3 weeks, until I got with a crazy idea and I just came here to express it. So, my question comes down to this: Installing a light virtual OS software like Virtual PC and then installing in there a Server OS like an Ubuntu server inside that virtual software will work? Will it work 24/7 or when I close the virtual pc software? Will this work in a fileserver? Any suggestion, answer, critic to the place I work, crazy new concurrent database that will work in fileserver will be most than welcome.

  Read the article

• What's the best way to telnet from a remote Windows PC without using RDP?

  - by Rob D.

  Three Networks: 10.1.1.0 - Mine 172.1.1.0 - My Branch Office 172.2.2.0 - My Branch Office's VOIP VLAN. My PC is on 10.1.1.0. I need to telnet into a Cisco router on 172.2.2.0. The 10.1.1.0 network has no routes to 172.2.2.0, but a VPN connects 10.1.1.0 to 172.1.1.0. Traffic on 172.1.1.0 can route to 172.2.2.0. All PCs on 172.1.1.0 are running Windows XP. Without disrupting anyone using those PCs, I want to open a telnet session from one of those PCs to the router on 172.2.2.0. I've tried the following: psexec.exe \\branchpc telnet 172.2.2.1 psexec.exe \\branchpc cmd.exe telnet 172.2.2.1 psexec.exe \\branchpc -c plink -telnet 172.2.2.1 Methods 1 and 2 both failed because telnet.exe is not usable over psexec. Method 3 actually succeeded in creating the connection, but I cannot login because the session registers my carriage return twice. My password is always blank because at the "Username:" prompt I'm effectively typing: Routeruser[ENTER][ENTER] It's probably time to deploy WinRM... Does anyone know of any other alternatives? Does anyone know how I can fix plink.exe so it only receives one carriage return when I use it over psexec?

  Read the article

• Unable to ssh to a Linux VM after a day

  - by jogabonito

  I have a machine running 4 VMs on it. There is one Fedora VM which is causing me some trouble. The IPs of the VMs are something like 10.100.100.* I have a Windows PC which is in the same network. It has an IP 10.100.25.77. When I reboot the Fedora VM, I am able to ping it from my Windows PC as well as use putty to ssh to it. The next day, I cant ping it or ssh from my Windows PC. However I can ping and ssh to the other VMs on the machine. If I ssh to one of the other VMs, I can ping and ssh to the Fedora VM. Next if I restart it, things get back to normal and I can access it without any issues. The IP of the VM doesn't change after rebooting and it is statically assigned I would like to know what is causing this and how to get it fixed. As a last resort, I am thinking of running a cron job to restart the VM every night, it is not a critical server, but will be generally used occasionally in the day time.

  Read the article

• Finding default gateway in an openvpn environment in windows

  - by Alexander Trümper

  I need to find the default gateway in a openvpn scenario where the route output looks like that: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.49.73.1 10.49.73.24 10 0.0.0.0 128.0.0.0 10.8.0.1 10.8.0.2 30 So I googled around a bit and a found this script here: @For /f "tokens=3" %%* in ( 'route.exe print ^|findstr "\<0.0.0.0\>"' ) Do @Set "DefaultGateway=%%*" echo %DefaultGateway% This works, but matches both lines in the route output. But I need to find this line: 0.0.0.0 0.0.0.0 10.49.73.1 10.49.73.24 10 So I tried to modify the findstr parameter like this: findstr "\<0.0.0.0\>.\<0.0.0.0\>" in the expectation that '.' will match for the tab between the columns. But it doesn't. It will still set DefaultGateway to 10.8.0.1 I couldn't find a clue in MS documentation either. Maybe someone knows the right expression? Thanks a lot.

  Read the article

• A little guidance setting up FTP server authentication on Windows Server 2008 R2 standard?

  - by Ropstah

  I have a (clean) server running Windows Server 2008 R2 standard. I would just like to use it for serving a website and a FTP server through IIS. IIS is installed and serves my website propery. I have now added a FTP site but when I try to logon using my user/pass i get the following error: 530 User cannot login From this article (http://support.microsoft.com/kb/200475) I understand that these four causes can be pointed out: The Allow only anonymous connections security setting has been turned on in the Microsoft Management Console (MMC). Not the case The username does not have the Log on locally permission in User Manager. The user is in the Users group, however I'm not able to logon through RDP. I tried configuring this by following this article through GPMC however this only works when I'm logged in as a domain user on a domain controller which I'm not: I'm logged in as administrator The username does not have the Access this computer from the network permission in User Manager. Not sure what this implies...? The Domain Name was not specified together with the username (in the form of DOMAIN\username). Tried adding the server name: server\username, not working... I am an absolute server noob and I'd just like to be able to connect through FTP... Any guidance is highly appreciated!

  Read the article

• Log and debug/decrypt an windows application's HTTPS traffic

  - by cweiske

  I've got a proprietary windows-only application that uses HTTPS to speak with a (also proprietary, undocumented) web service. To ultimately be able to use the web service's functionality on my linux machines, I want to reverse-engineer the web service API by analyzing the requests sent by the application. Now the question: How can I decrypt and log the HTTPS traffic? I know of several solutions which don't apply in my case: Fiddler is a man-in-the-middle HTTPS proxy which I cannot use since the application doesn't support proxies. Also, I do not (yet) know if it works with self-signed server certificates, which I doubt. Wireshark is able to decrypt SSL streams if you have the server's private certificate, which I don't have. any browser extension since the application is not a browser If I remember correctly, there have been some trojans that capture online banking information by hooking into/replacing the window's crypto API. Since the machine is mine, low level changes are possible. Maybe there is a non-trojan (white-hat) network log application out there which does the same? There is a blackhat presentation with some details available to read. They refer to Microsoft Research Detour for easy API hooking.

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• What can prevent a Server 2008 machine accessing its OWN UNC shares?

  - by Simon

  I need to set up a UNC share for my hosted dedicated server to access a share on itself. Unfortunately TFS requires a UNC share. I am on a Windows Server 2008 Standard SP2 64bit dedicated server behind a PIX 501 firewall hosted with GoDaddy. I just cannot get the server to access itself and get this error: Windows cannot access \\SERVER\SHARE Check the spelling of the name.. etc. I've found numerous questions about this but no answer to my problem. Server 2008 Standard x64 SP2 Workgroup - not domain Windows Firewall is off Computer browser service is on I am trying to access \\MYMACHINE\TFS-BUILDS by typing in - or double clicking. Neither works. Machine has single network card Filesharing wizard says share was ok Share was showing under 'Computer management' Permissions are set to 'everyone' full control No obvious errors in eventlog Reboot didn't fix it Unfortunately I cannot try to access other shares in or out of this machine because it is a hosted dedicated server and the only machine behind a hardware firewall. The only thing left i can think of is that the hardware firewall needs to be configured. I don't think it is this because we have a 2003 Server machine behind a different hardware firewall and that one works fine. What on earth is left?!

  Read the article

• How can I configure Samba to share (read/write) any folder with root permissions?

  - by Mike Toews

  I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

  Read the article

• Blocking of certain file downloads

  - by Philip Fourie

  I have a problem where I cannot completely download a certain file from a server. The file is 1.9MB in size but only 68% is downloaded and then it hangs. I tried and these cases, which failed: Downloaded the file with HTTP Downloaded the file with FTP Moved the file to different FTP and web servers behind the ISA firewall Tried with IIS 6.0 & IIS 7.0 Multiple download clients. Which included FireFox, FileZilla (on Windows) and wget (on Linux) This worked: Downloading other files from the same location on the server. Both bigger and smaller and in size than the original. FTP and HTTP worked. Earlier version of this file (.DLL) works. It is as if the content of this file has an influence on this file being served. Network architecture: Client Machine - Internet (ISP) - ISA Server - IIS 7.0 The only constants are the ISP, Cisco router and the ISA server. Is it possible that something is rejecting the download because of the contents of the file? I am hoping ISA is the culprit... I am not a ISA expert is there somewhere I can look to establish if it is indeed ISA causing this? Update: Splitting the file into two parts with a hex editor results in one half of the file being served correctly and the other part not. Zipping the file results in the file being downloaded successfully. However this is not an option for this particular scenario. Renaming the file and its extension also doesn't work. Update 2009/10/22: It does NOT seems to be ISA that is causing this problem. We connected a laptop (running IIS) on an available public IP and still the file download to 68% before it hanged. The two remaining components are the ISP and the Cisco 800 series router. Anyone knows about an issue on the router perhaps?

  Read the article

• Windows 7 can't find Ubuntu computer by hostname

  - by endolith

  I got a new Windows 7 machine, and was using VNC, SSH etc to connect to my Ubuntu machine, and it worked fine previously connecting to the Ubuntu computer's hostname. Now it doesn't work if I use the machine's hostname, but it does if I use the local IP or DynDNS name. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it? Aha: It probably has something to do with Samba. I reset the Samba configuration the other day, and apparently this can affect it. http://ubuntu-virginia.ubuntuforums.org/showthread.php?t=1558925 I tried commenting out "encrypt passwords = No" as described there, but it still doesn't work.

  Read the article

• Consulting: Organizing site/environment documentation for customers?

  - by ewwhite

  Over time, I've taken on consulting and contract engineering work for various clients. More recently, customers are asking for certain types of documentation. These are small businesses and typically do not have dedicated technical staff. Within a single company, Wiki/Confluence/Sharepoint, etc. all make sense as a central repository for documentation and environment information. I struggle with finding a consistent method to deliver the following information to discrete customers. I'm shooting for a process that's more portable, secure and elegant than a simple spreadsheet or the dreaded binder full of outdated information. Important IP addresses, DHCP scope, etc. Network diagram (if needed). Administrative usernames and passwords and management URLs. Software license keys. Support contracts and warranty information. Vendor support contacts and instructions. I know there are other consultants here. Any suggestions or tips on maintaining documentation across multiple environments in a customer-friendly format? How do you do it?

  Read the article

• Capabilities of business and SOHO routers

  - by Q8Y

  I'm currently studying for the CCNA certifications (especially for Cisco routers and configuration). I know that business routers provide more features than SOHO routers, the processing speed and RAM can be enough. Assume I need to connect a number of users through a network (accessing internet, share files, printers, ...). I have a high speed connection to the internet and I already applied QoS. How can I find out how many users such a single (SOHO) router could handle? In my case I'd attach to it multiple switches until I have the number of ports needed. Would everything work well and smoothly with 50 users? What about 300? At which point would I need a business router instead? If I implemented VLAN here, would it make any difference in the performance? When do I really need to use more than one router? (Both SOHO and business) I'm thinking that I may need them only if I want to increase the performance (instead of replacing the existing one) and if I have multiple locations, so in this situation I need to have multiple routers, right? Put differently: Is there is a need to have another router if my business all in one place?

  Read the article

• Can I autoregister my servers hostname in my local DNS? [on hold]

  - by Christian Wattengård

  We have evaluated a W2k12 server as a domain controller at work. This has the extra benefit of registering every "subordinate" computers name in it's DNS so that I don't have to go around remembering IP's all the time. (And it let's me easily run dhcp also on my "pop-up" dev-servers). We need to rework our work network for several odd reasons, and in this new scenario there was no money for an extra Windows 2012 license. We have at our disposal several old boxes that run linux quite well. Is it possible to set up a DNS-server-"appliance" that somehow autoregisters it's own hostname.. Scenario: Router (N66u) on 172.20.20.1. Runs DHCP on 172.20.20.100-200 range. Server [verdant] of a *nix flavor on 172.20.20.2 Laptop [speedy] of W8 flavor on DHCP assigned Laptop [canary] of W8 flavor on DHCP assigned Desktop [lianyu] of Ubuntu flavor on DHCP assigned What I would like is that all of the above servers (except possibly the router) would be available on verdant.starling.lan and canary.starling.lan and so on. This is how it works right now (except the Ubuntu box... I haven't cracked that one yet) because Windows just does this for you.. I would also be able to do this without any manual labor on the server. When I tell my box it's name is smoak it should "immediately" be available as smoak.starling.lan without any extra configuration on my part. How can I do this in a Linux (Ubuntu) environment?

  Read the article

• Advertise a subnet route with radvd

  - by Thomas Berger

  we have set up a small IPv6 Testing network. The setup looks like this: ::/0 +----------+ | Firewall | Router to the public net +----------+ | 2001:...::/106 | +----------+ +-------| SIT GW | sit Tunnel gatway to the some test users | +----------+ | +----------+ | Test Sys | Testsystem +----------+ The idea is to advertise the default route from the firewall and the route for the SIT subnets from the sit gateway. The configurations for radvd are: # Firewall interface eth0 { AdvSendAdvert on; route ::/0 { }; }; # SIT Gatway interface eth0 { AdvSendAdvert on; route 2001:...::/106 { }; }; We have captured the adv. packages with tcpdump and the packages looks good. We see a default route from the fw, and the subnet route from the SIT gatway. But if we look on the testsystem there are two default routes over both gateways. There is no subnet route. The routing does not work of course. Here the routes we get: 2001:.....::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::baac:6fff:fe8e:XXXX dev eth0 proto kernel metric 1024 expires 0sec mtu 1500 advmss 1440 hoplimit 64 default via fe80::e415:aeff:fe12:XXXX dev eth0 proto kernel metric 1024 expires 0sec mtu 1500 advmss 1440 hoplimit 64 Any Idea?

  Read the article

• Is there a standard method for assigning nameservers to servers in a Windows domain?

  - by HopelessN00b

  As the title asks, I'm wondering if there's any standard or "best practice" for how to actually assign nameservers (DNS) and manage the nameserver configuration for client servers on a Windows domain. I'm talking about the setting circled in the below image, in case the language of the question is not clear enough: This is for a large, multi-site environment, where ideally/hopefully all servers point at their site's Domain Controller as the primary DNS server, and a DNS server at a different site as the secondary DNS server. For simplicity's sake, we can say that the secondary server would be the Domain Controller at the home site for everyone, and there are no tertiary DNS servers (even though that's not actually the case). Try as I might, I can't seem to find a GPO setting for this (at least on FL 2003 R2, the Computer Configuration - Administrative Templates - Network - DNS Client - DNS Servers GPO is Supported on: Windows XP Professional only), and I find it rather hard to believe that the "best"/"standard" solution would therefore be either scripting up something to apply the DNS settings per site, or using a DHCP server to push those configurations out to the other servers via the DHCP Scope Options. So, is there a standard way of managing this configuration? (That's hopefully not "a script" or "DHCP Scope Option.)

  Read the article

• VMWare use of Gratuitous ARP REPLY

  - by trs80

  I have an ESXi cluster that hosts several Windows Server VMs and around 30 Windows workstation VMs. Packet captures show a high number of ARP replies of the form: -sender_ip: VM IP -sender_mac: VM virtual MAC -target_ip: 0.0.0.0 -target_mac: Switch interface MAC The specific addresses aren't really a concern -- they're all legitimate and we're not having any problems with communications (most of the questions surrounding GARP and VMWare have to do with ping issues, a problem we don't have). I'm looking for an explanation of the traffic pattern in an environment that functions as expected. So the question is why would I see a high number of unsolicited ARP replies? Is this a mechanism VMWare uses for some purpose? What is it? Is there an alternative? EDIT: Quick diagram: [esxi]--[switch vlan]--[inline IDS]--[fw]--(rest of network) The IDS is complaining about these unsolicited ARPs. Several IDS vendors trigger on ARP replies without a prior request, or for ARP replies that have a target IP of 0.0.0.0. The target MAC in these replies is the VLAN interface on the switch. Capture points: -The IDS grabs the offending packets -The FW can see the same ones -A VM on the ESXi host does not see these, although there is an ARP request for a specific IP on the ESXi host that has source_ip=0.0.0.0 and source_mac=[switch vlan interface]. I can't share the captures, unfortunately. Really I'm interested in finding out if this is normal for an ESXi deployment.

  Read the article

• What are the most likely bottlenecks determining the performance of CamStudio screen recording?

  - by Steve314

  When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

  Read the article

• FreeNAS pool configuration - RAID1 + other drives

  - by trnelson

  Simple questions, really. I found this answer with a similar setup, but not sure it answers my question. If it does, I'm curious why since the answer seems a bit unsure: ZFS Hard Drive Configuration in FreeNAS I'm building a server which will be used primarily for backup, plus some media streaming, possibly with Plex. I seem to understand most everything I need, but I'm still a bit confused on how pools work, and how to configure them for my scenario. I will have 2x 2TB WD Red drives, which I plan on using in a mirrored set up (RAID1). This would be for backup, and I'd also like to do offsite backup to my CrashPlan account from this array. I also have a few other drives: 1.5TB, 320GB, 250GB. I'm not sure exactly what to do with them yet, but looking for options. FreeNAS OS will be running from a 16GB USB Flash drive. Would it be wise to use the 1.5TB as a backup-backup, essentially as a mirror or perhaps for snapshots of the 2TB RAID1? I'm still learning about snapshots. Should the 2TB mirrored drives be in their own pool? Should the other drives be set up in their own pools as well, or should they be JBOD in a single pool? They may or may not get much use since the 2TB array is plenty for me. Does a dataset basically mimic the idea of a partition or a network share? In other words, I would map \SERVER\Share to X: on my laptop? Let's say I wanted to use the 250GB drive as an encrypted drive to store all of my cat pictures. Would it have to be in its own pool? If I use jails apps, should they go in the backup RAID1, or in another place? Thank you!

  Read the article

• Outlook Calendar Attachments to have limited access to just Required attendees

  - by Jason Pearce

  The management team at my company often attaches documents (Word, Excel, PDFs) to their Outlook Calendar meeting requests. The meeting requests are sent to the managers, but also to their assistants. The desire is to have everyone be able to view the full meeting request and its content, but limit the ability to open the attachments to just the managers. Is there a way in Outlook 2003 and/or 2007 to limit access to attachments that accompany meeting requests? Ideally, can access to the attachments be controlled by the "Select Attendees and Resources" window when selecting individuals from the Global Address List. Can those in the Required field have access to the attachments while those in the Optional or Resources fields not have access? My suggestion was to simply place all meeting attachments in a shared network folder that has read/write access limited to managers. They would then just place fully qualified links to those files in the body of the Meeting Request. While everyone would receive and see the links, only a few would have access. This, however, wasn't easy enough for them, so I'm looking for some other ideas.

  Read the article

• How do I cancel windows server 2003 repair install?

  - by Kilgore2k

  System: Windows 2003 Server Enterprise Scenario: NTDS db is corrupt and all attempts to fix with esentutl fail. Ran chkdsk which seemed to repair disk error and give access to the ntds.dit file but still esentutl fails. (Attached the drive to a different server to run the esentutl) Error: Access to source database '[path to copy of]/ntds.dit' failed with Jet error -1022. Operation terminated with error -1022 (JET_errDiskIO, Disk IO error) after 0.170 seconds. This error occurs on any disk I cpoy the files to including original location in C:\WINDOWS\NTDS\ Now enter the "Stupid!" and "what was I thinking!?" part (must be the late hour...) Stupid: No updated backup - after using a backup I get a network password error in the lsass error. what was I thinking!?: Started the install repair from the original CD but the install fails since the AD fails to start. Now I cant boot into any mode (safe mode, AD restore etc) nor complete the repair install. I would really like to avoid a fresh install since I have the Exchange server on this DC and would rather migrate to a new server than have to start from scratch. Thanks!

  Read the article

< Previous Page | 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115  | Next Page >