Search Results

Search found 3025 results on 121 pages for 'amazon ec2'.

Page 111/121 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

• Wireless card on HP laptop not working

  - by D. Strout

  I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

  Read the article

• Having Trouble Ripping Some CD's

  - by James

  Hi, When I buy CD's I tend to rip them to FLAC right away. When ripping I use Foobar2000 or Exact Audio Copy and enable secure ripping which uses error correction. Recently I bought a 2 CD compilation album brand new but when I tried to rip the second CD on my laptop using Foobar2000 it struggled with the last 2 tracks and was unable to finish. EAC was also unable to get an accurate rip and reports read errors. Ripping in fast mode results in audible errors in the output track. I have tried another computer and having similar problems. I cannot see any damage to the disc and it has not been dropped or anything. The weird thing is that I had similar problems with a different album and different PC a while back. This other CD was a compilation disk so it was also right up to the CD capacity limit and again it was the last few tracks that would not rip. Dozens of other discs have ripped fine So I am wondering if the CD is simply defective, or whether it is something else. How common are defective CD's? Do some CD drives struggle with CD's of this capacity? Or Is this some kind of copy protection? I'm thinking of asking Amazon for a replacement but it would be annoying if I get the same problem again.

  Read the article

• Wireless very slow on one laptop on network, all other machines normal?

  - by th3dude19

  My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

  Read the article

• Why cache static files with Varnish, why not pass

  - by Saif Bechan

  I have a system runnning nginx / php-fpm / varnish / wordpress and amazon s3. Now I have looked at a lot of configuration files while setting up the system, and in all of them I found something like this: /* If the request is for pictures, javascript, css, etc */ if (req.url ~ "\.(jpg|jpeg|png|gif|css|js)$") { /* Remove the cookie and make the request static */ unset req.http.cookie; return (lookup); } I do not understand why this is done. Most of the examples also run NginX as a webserver. Now the question is, why would you use the varnish cache to cache these static files. It makes much more sense to me to only cache the dynamic files so that php-fpm / mysql don't get hit that much. Am I correct or am I missing something here? UPDATE I want to add some info to the question based on the answer given. If you have a dynamic website, where the content actually changes a lot, chaching does not make sense. But if you use WordPress for a static website for example, this can be cached for long periods of time. That said, more important to me is static conent. I have found a link with some test and benchmarks on different cache apps and webserver apps. http://nbonvin.wordpress.com/2011/03/14/apache-vs-nginx-vs-varnish-vs-gwan/ NginX is actually faster in getting your static content, so it makes more sense to just let it pass. NginX works great with static files. -- Apart from that, most of the time static content is not even in the webserver itself. Most of the time this content is stores on a CDN somewhere, maybe AWS S3, something like that. I think the varnish cache is the last place where you want to have you static content stored.

  Read the article

• Alternative Bluetooth Stacks for Windows 7 64bit

  - by Martin

  I have a notebook with an inbuilt Broadcom BCM2046 bluetooth adapter and several bluetooth HID-devices (mice, keyboards etc.) The operating system is Windows 7 64 bit Professional. The HID-devices all work perfectly with other computers, but on the system mentionend above, problems with some power-saving features inside the HID-devices occur (see eg. Amazon reviews for Microsoft Mobile Keyboard 6000 not waking up). I have tried the bluetooth drivers supplied by Windows update and the latest Broadcom drivers directly from the Broadcom updater software. The problems persist (I can rule out any further configuration issues or alternative device drivers, I have tried every possibility). I have tried a trial version of the BlueSoleil Bluetooth stack and it solved the wake-up problem. However the BlueSoleil stack causes some other problems, is relatively expensive and I would prefer not to use it. My question: are there any other alternative bluetooth stacks availible for Windows 7 64bit? To my knowledge there used to be Toshiba Bluetooth stack for non-Toshiba hardware, but the older versions I have found on the internet do not install, they do not seem to recognize the bluetooth hardware when installing the driver.

  Read the article

• Converting PDF eBooks into a Kindle format

  - by Ender

  Over the past couple of years I've amassed quite a collection of guides, tutorials and ebooks in PDF format. A lot of these are quite useful for work, especially PDF documentation, and rather than have to be at a computer every time I want to read how to do something in Sitecore or to read through a software testing ebook I'd like to do it on my brand-spanking-new Kindle. However, even though there is now a native PDF reader on the Kindle due to the nature of PDF's they are practically unreadable. The text doesn't wrap due to how PDF's are sized and so far after a bunch of Google searches I've yet to find a viable solution to get my PDF's converted into a readable Kindle format. Sometimes these books have code or pictures/tables in them, but most of the time they're text-heavy and to be honest I'd be surprised if there wasn't a free tool to handle the converting of PDF to one of the (seemingly many) Kindle formats. So, can anyone help me out with this? EDIT: I've tried Calibre, and have checked their forums to play with some of the advanced settings, yet the solutions available seem to be extremely poor, especially if the book you're attempting to read contains equations, code, or anything outside of plain text. I've also tried Amazon's conversion service, which wasn't much help with such documents. The best way I have found so far is to build the entire thing over again in ePub or RTF format and convert to MOBI from there. This works for text-heavy books with tables, but anything technical still isn't covered. Can anyone help with this?

  Read the article

• Windows 7 ICS client web failure

  - by n8wrl

  I have several windows 7 PC's connected on a LAN via a hub. One has a Verizon 3G connection and works great. I have internet connection sharing enabled on it, which automagically set the LAN connection to 192.168.137.1 and enabled DHCP. I am trying to get the client PC's working one at a time. The others are off. The client is able to: Get an IP via DHCP with correct settings. Ping any web address I can throw at it, so DNS and routing are working. Windows update works. But web sites hang in IE. All but google.com! I type www.msn.com, microsoft.com, amazon.com, etc. etc. All ping via a cmd window but IE just hangs - it says web site found but the green progress bar just slowly creeps and no content displays. www.google.com comes up even after clearing browser and dns cache. I am pulling my hair out - what am I missing? EDIT: After some more gyrations with a router I'm back to ICS. Same symptoms, only now I have an answer to Andrew's question, YES I can do Google searches but clicking on any of the result links hangs! Let one sit for half an hour with no timeout or error.

  Read the article

• Implementing emailing (bulk & event based) features for my website.

  - by Kabeer

  Hello. For my upcoming social networking website, I am looking for suggestions on the best way to implement emailing. Here are some of my requirements and constraints: Requirements: - Should be able to send emails based on events (new registrations, change password, etc.), promotions (advertisements based on user consent), bulk mails (newsletters), reminders (profile updates), etc. I hope I got the point through. - Should be able to process faults (incorrect email address, mail-box full, etc) - User initiated invites (inviting friends to connect) Constraints: - As of now I am looking at Godaddy for hosting. Subsequently I shall move to, may be Amazon Cloud. Godaddy seems to be excruciatingly conservative (not bad always) when it comes to the ability to send email. - My tests on Godaddy so far have been discouraging. There is limit to no. of emails I can send and sometimes if emails carries special characters it throws strange exceptions like there was a virus affected attachment (even though I hadn't attached a thing). The replies from Godaddy support have been equally funny. My intent is not to portray Godaddy as wrong but I am looking for a work-around that frees me from said constraints. I am looking for a mechanism / service that is either free of very cost effective. I wonder how other sites address this. Mine is a .Net / Windows based application.

  Read the article

• Can Internet data be used by malware when PC off?

  - by Val

  I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• which is best smart automatic file replication solution for cloud storage based systems.

  - by TORr0t

  I am looking for a solution for a project i am working on. We are developing a websystem where people can upload their files and other people can download it. (similar to rapidshare.com model) Problem is, some files can be demanded much more than other files. The scenerio is like: I have uploaded my birthday video and shared it with all of my friend, I have uploaded it to myproject.com and it was stored in one of the cluster which has 100mbit connection. Problem is, once all of my friends want to download the file, they cant download it since the bottleneck here is 100mbit which is 15MB per second, but i got 1000 friends and they can only download 15KB per second. I am not taking into account that the hdd is serving same files. My network infrastrucre is as follows: 1 gbit server(client) and connected to 4 Nodes of storage servers that have 100mbit connection. 1gbit server can handle the 1000 users traffic if one of storage node can stream more than 15MB per second to my 1gbit (client) server and visitor will stream directly from client server instead of storage nodes. I can do it by replicating the file into 2 nodes. But i dont want to replicate all files uploadded to my network since it is costing much more. So i need a cloud based system, which will push the files into replicated nodes automatically when demanded to those files are high, and when the demand is low, they will delete from other nodes and it will stay in only 1 node. I have looked to gluster and asked in their irc channel that, gluster cant do such a thing. It is only able to replicate all the files or none of the files. But i need it the cluster software to do it automatically. Any solutions ? (instead of recommending me amazon s3) S

  Read the article

• Measuring performance indicators on a cluster

  - by Aditya Singh

  My architecture is based on Amazon. A ELB load balancer balances POST requests among m1.large instances. Every instance has a nginx server on port 80 which distributes the requests to 4 python-tornado servers on backend which handle the request. These tornado servers are taking about 5 - 10ms to respond to one request but this is the internal compute time of every request. I want to put this thing on test and i want to measure the response time from ELB to upstream and back and how does it vary when the QPS throughput is increased and plot a graph of Time vs. QPS vs. Latency and other factors like CPU and Memory. Is there a software to do that or should i log everything somewhere with latency checks and then analyze the whole log to get the stuff out. I would also need to write a self-monitor which keeps checking the whole response time. Is it possible to do it with a script from within the server. If so, will it be accurate ?

  Read the article

• Are ZFS snapshots + S3 a viable backup system for several VMs and general fileserver storage?

  - by AllanA

  I've been tasked with setting up a backup system for my small office (around 12 people). Most of our production stuff is on the AWS cloud, so what I need to back up are some small office/development files (under 100G right now), plus our operational VMs and development, which round out to a bit under 1T. I just need something reliable, convenient, and straightforward. I'm comfortable with Linux, FreeBSD, and to some extent Solaris 10, so I'm leaning toward a full server rather than an appliance system ala Openfiler or FreeNAS. What I'm contemplating is a small fileserver for general storage and nightly backups of the virtual machines, followed up by an offsite backup to Amazon's S3 storage service. It'd be the usual incremental backups nightly and full backup weekly. My question is if using ZFS snapshots, both locally and dumped to S3 via 'zfs send [-i]', is a viable backup tool? Or should I stick to using Duplicity, or some other method entirely? ZFS snapshots on the internal fileserver/backup machine sound like a perfect way to provide quick and convenient data recovery, so I'm likely to go with that for local redundancy. (If you folks see scenarios where relying on ZFS snapshots would be worse than a more traditional archiving backup, feel free to convince me.) But are snapshots flexible enough to lean on for recovery from the loss of my backup server? Or am I better off with something more traditional? (feel free to recommend free or commercial backup solutions you favor.)

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• How to use LVM on Rackspace Cloud

  - by batrick

  Dear all, I am trying to set up a simple but effective solution to make a backup of my rackspace cloud servers. These servers each run subversion, trac, and some database-backed custom php applications. My idea is to set up a LVM and mount a volume under, say, /srv. In this volume, I keep the data from all applications. Instead of caring about how to back-up each app in a different way (svn hotcopy, trac-admin hotcopy, huge mess for mysql), I simply take an LVM snapshot and back this one up cloud files using the excellent cloudcity script (http://github.com/jspringman/cloudcity/blob/master/cloudcity). The advantage of this solution is that it is quick and easy, and LVM allows to make decent backups. As more apps are added, it should not be required to change the backup script much. The downside, and main point of my question here, is that I am not sure how to get LVM working on Rackspace cloud, because there is only one root volume and no service like Amazon's EBS. I was thinking it may be possible to create a large empty file and use this as a "physical volume". Has anybody done anything like this before? Or do you know why it can never work? It would be great to hear from you. Thanks, batrick

  Read the article

• Remote Desktop Services Licensing - Does server have to have a RDS role?

  - by transistor1

  I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

  Read the article

• nginx reverse proxy slows down my throughput by half

  - by Isaac A Mosquera

  I'm currently using nginx to proxy back to gunicorn with 8 workers. I'm using an amazon extra large instance with 4 virtual cores. When I connect to gunicorn directly I get about 10K requests/sec. When I serve a static file from nginx I get about 25 requests/sec. But when I place gunicorn behind nginx on the same physical server I get about 5K requests/sec. I understand there will be some latency from nginx, but I think there might be a problem since it's a 50% drops. Anybody heard of something similar? any help would be great! Here is the relevant nginx conf: worker_processes 4; worker_rlimit_nofile 30000; events { worker_connections 5120; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; } sites-enabled/default: upstream backend { server 127.0.0.1:8000; } server { server_name api.domain.com ; location / { proxy_pass http://backend; proxy_buffering off; } }

  Read the article

• Get more space for redis in unix server

  - by DevTraveler

  In our app we have only windows servers beside the cases we use redis queues. This case , we use unix server created by amazon. As you can see we do not have a lot of space available and we want to make sure redis has enough space to work without getting stuck. I am little bit new in unix and after reading some data about the unix file system i still was not fully sure how can i give the redis drive (it is in the home directory) more space. I see the mnt that has a lot of space but read it is temporary for cd-rom and network drives. Can you help me figure out how to get more space to my redis ? If it is possible i prefer not to re-install the redis server. Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.7G 880M 89% / udev 7.4G 4.0K 7.4G 1% /dev tmpfs 3.0G 152K 3.0G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.4G 0 7.4G 0% /run/shm /dev/xvdb 414G 30G 364G 8% /mnt Thanks.

  Read the article

• Ethernet/8P8C crimp contacts bent

  - by Fire Lancer

  (if anyone knows correct terminology please correct). Ive got a (fairly large) number of existing Ethernet cables that over the years many have got damaged connector clips, so got a crimp tool and some new connectors for them. However out of all 4 attempts I have tried, on crimping 2+ of the little copper contacts that bite into the wires have instead just bent to one side, and so gone between the gaps in in the crimp tool... Unless this really is me doing something wrong (what?) I am inclined to blame the hardware, but is this the crimper or the new connectors I got? I tried to take a picture, as you can just about see looking from the left 3rd, 6th, 7th and 8th pins didn't get pushed in, and so don't form a connector. Unfortunately my camera was barely able to focus on it and then this website converted it to a JPEG... Update: Connectors/Cable/Tools: The wires are stranded (looks about 6 and no evidence of being aluminum/not copper), and the pins(?) have 2 little flat spikes lengthways along the cables (I understand to dig into it, while solid core connectors would have like 2 plates designed to go around the core?). Crimper was http://www.amazon.co.uk/gp/product/B0013EXTKK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 (seemed to be highly rated, I already had tools for cutting/stripping). Update2: Picture of crimp "prongs" (?) Update3: Side picture of connector Update4: Comparison with old connector. The top (used) connector is one from a few years back (different tool and connectors), the thing that concerns me that it might not be the tool I need to replace is just how thin the pins are on the new one that maybe a tool could legitimately bend some into a gap rather than pushing them in fully? In fact I can move individual pins to the sides significantly with my fingernail, is that normal?

  Read the article

• Django Admin Page missing CSS

  - by super9

  I saw this question and recommendation from Django Projects here but still can't get this to work. My Django Admin pages are not displaying the CSS at all. This is my current configuration. settings.py ADMIN_MEDIA_PREFIX = '/media/admin/' httpd.conf <VirtualHost *:80> DocumentRoot /home/django/sgel ServerName ec2-***-**-***-***.ap-**********-1.compute.amazonaws.com ErrorLog /home/django/sgel/logs/apache_error.log CustomLog /home/django/sgel/logs/apache_access.log combined WSGIScriptAlias / /home/django/sgel/apache/django.wsgi <Directory /home/django/sgel/media> Order deny,allow Allow from all </Directory> <Directory /home/django/sgel/apache> Order deny,allow Allow from all </Directory> LogLevel warn Alias /media/ /home/django/sgel/media/ </VirtualHost> <VirtualHost *:80> ServerName sgel.com Redirect permanent / http://www.sgel.com/ </VirtualHost> In addition, I also ran the following to create (I think) the symbolic link ln -s /home/djangotest/sgel/media/admin/ /usr/lib/python2.6/site-packages/django/contrib/admin/media/ UPDATE In my httpd.conf file, User django Group django When I run ls -l in my /media directory drwxr-xr-x 2 root root 4096 Apr 4 11:03 admin -rw-r--r-- 1 root root 9 Apr 8 09:02 test.txt Should that root user be django instead? UPDATE 2 When I enter ls -la in my /media/admin folder total 12 drwxr-xr-x 2 root root 4096 Apr 13 03:33 . drwxr-xr-x 3 root root 4096 Apr 8 09:02 .. lrwxrwxrwx 1 root root 60 Apr 13 03:33 media -> /usr/lib/python2.6/site-packages/django/contrib/admin/media/ The thing is, when I navigate to /usr/lib/python2.6/site-packages/django/contrib/admin/media/, the folder was empty. So I copied the CSS, IMG and JS folders from my Django installation into /usr/lib/python2.6/site-packages/django/contrib/admin/media/ and it still didn't work

  Read the article

• How can I disable keep-alive on ASP.NET Web Service client requests?

  - by Matthew Brindley

  I have a few web servers behind an Amazon EC2 load balancer. I'm using TCP balancing on port 80 (rather than HTTP balancing). I have a client polling a Web Service (running on all web servers) for new items every few seconds. However, the client seems to stay connected to one server and polls that same server each time. I've tried using ServicePointManager to disable KeepAlive, but that didn't change anything. The outgoing connection still had its "connection: keep-alive" HTTP header, and the server kept the TCP connection open. I've also tried adding an override of GetWebRequest to the proxy class created by VS, which inherits from SoapHttpClientProtocol, but I still see the keep-alive header. If I kill the client's process and restart, it'll connect to a new server via the load balancer, but it'll continue polling that new server forever. Is there a way to force it to connect to a random server each time? I want the load from the one client to be spread across all of the web servers. The client is written in C# (as is the server) and uses a Web Reference (not a Service Reference), which points to the load balancer.

  Read the article

• pylons on production server fedora 8

  - by stormdrain

  I'm interested in learning some python, and thought Pylons would be a good starting point (after spending 2 days trying to get django working -- to no avail). I have an Amazon EC2 instance with Fedora 8 on it. It is a bare-bones install. I am halfway through my second day of trying to get it to work. I have mod_wsgi installed. I have Apache (though that's a later task to tackle). I have easy_install, paster is working fine; basically all of the pre-requisites mentioned throughout the Pylons docs. I can't for the life of me get the thing to work. And I can't seem to find a coherent walkthough anywhere that lists all the steps necessary. There is tons of info out there, but it is all scattered. Wsgi this, python that. Google, google, google... "47 million results found for 'socket.error:(lol, 'Yous a goofs')". So, this is my latest attempt: apachectl -k stop cd /home/ paster create -t pylons test [blah blah.. ok] cd test nano development.ini [hmm, last time I changed the host from 127.0.0.1 to my domain name or url, it threw an error like socket.error: (99, 'Cannot assign requested address')... I'll just leave it] [open port 5000 on firewall] paster serve development.ini [firefox-url:5000] Firefox can't establish a connection to the server Doing these steps locally works as expected. This is just a test to see if I can get it to work at all, which I can't. If I get it to work, then is the task of getting it to work with apache. My madness is that I'd like to play around a little developing and deploying before diving into a full-fledged project. So far: self, I am dissapoint.

  Read the article

• Why do people say that Ruby is slow?

  - by stephen murdoch

  I like Ruby on Rails and I use it for all my web development projects. A few years ago there was a lot of talk about Rails being a memory hog and about how it didn't scale very well but these suggestions were put to bed by Gregg Pollack here. Lately though, I've been hearing people saying that Ruby itself is slow. Why is Ruby considered slow? I do not find Ruby to be slow but then again, I'm just using it to make simple CRUD apps and company blogs. What sort of projects would I need to be doing before I find Ruby becoming slow? Or is this slowness just something that affects all programming languages? What are your options as a Ruby programmer if you want to deal with this "slowness"? Which version of Ruby would best suit an application like Stack Overflow where speed is critical and traffic is intense? The questions are subjective, and I realise that architectural setup (EC2 vs standalone servers etc) makes a big difference but I'd like to hear what people think about Ruby being slow. Finally, I can't find much news on Ruby 2.0 - I take it we're a good few years away from that then?

  Read the article

• GMail appearing to ignore Reply-To.

  - by Samuurai

  I'm using a gmail account to send emails from my website. I'm using the same account to pick up emails which are generated by the contact facility on my site. I'm using the Reply-To field to attempt to make it easier to hit reply and easily get back to people. The message comes up with the 'from' address and ignores the 'reply-to' address. Here's my header: Return-Path: <[email protected]> Received: from svr1 (ec2-79-125-266-266.eu-west-1.compute.amazonaws.com [79.125.266.266]) by mx.google.com with ESMTPS id u14sm23273123gvf.17.2010.03.10.14.33.24 (version=TLSv1/SSLv3 cipher=RC4-MD5); Wed, 10 Mar 2010 14:33:25 -0800 (PST) Received: from localhost ([127.0.0.1] helo=www.rds.com) by aquacouture with esmtp (Exim 4.69) (envelope-from <[email protected]>) id 1NpUSx-0001dK-JM for [email protected]; Wed, 10 Mar 2010 22:33:23 +0000 User-Agent: CodeIgniter Date: Wed, 10 Mar 2010 22:33:23 +0000 From: "New Inquiry" <[email protected]> Reply-To: "Beren" <[email protected]> To: [email protected] Subject: =?utf-8?Q?Test?= X-Sender: [email protected] X-Mailer: CodeIgniter X-Priority: 3 (Normal) Message-ID: <[email protected]> Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="B_ALT_4b981e3390ccd" This is a multi-part message in MIME format. Your email application may not support this format. --B_ALT_4b981e3390ccd Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit test --B_ALT_4b981e3390ccd Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable test --B_ALT_4b981e3390ccd--

  Read the article

• gevent install on x86_64 fails: "undefined symbol: evhttp_accept_socket"

  - by digitala

  I'm trying to install gevent on a fresh EC2 CentOS 5.3 64-bit system. Since the libevent version available in yum was too old for another package (beanstalkd) I compiled/installed libevent-1.4.13-stable manually using the following command: ./configure --prefix=/usr && make && make install This is the output from installing gevent: [gevent-0.12.2]# python setup.py build --libevent /usr/lib Using libevent 1.4.13-stable: libevent.so running build running build_py running build_ext Linking /usr/src/gevent-0.12.2/build/lib.linux-x86_64-2.6/gevent/core.so to /usr/src/gevent-0.12.2/gevent/core.so [gevent-0.12.2]# cd /path/to/my/project [project]# python myscript.py Traceback (most recent call last): File "myscript.py", line 9, in <module> from gevent.wsgi import WSGIServer as GeventServer File "/usr/lib/python2.6/site-packages/gevent/__init__.py", line 32, in <module> from gevent.core import reinit ImportError: /usr/lib/python2.6/site-packages/gevent/core.so: undefined symbol: evhttp_accept_socket I've followed exactly the same steps on a local VirtualBox instance (32-bit) and I'm not seeing any errors. How would I fix this?

  Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >