Search Results

Search found 20592 results on 824 pages for 'anything'.

Page 111/824 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Codec Pack that can easily be deployed via group policy

    - by testguy
    We have a teacher that has a project for doing some basic film editing with windows movie maker. We loaded the avi file onto the computer and Windows is trying to install a codec but can't. I assume I need to install some type of codec pack. I'm looking for suggestions on a codec pack that I can easily deploy through a Win2003 server to WinXP clients. Ideally, this codec pack shouldn't break anything else and be easily removed if need be.

    Read the article

  • snmpd.conf network range not accepted

    - by Stefan
    I am using snmpd on CentOS 6.3 and was giving a network range to the source for mapping community to security group. com2sec mynetwork 192.168.0.0/23 centreon Anyhow it is not working and I always get a timeout from the polling server. When I enter the exact ip of the polling server it works (192.168.3.180) It even works if I enter the whole netmask (255.255.252.0) Anyhow it should work according to documentation. Did I do anything wrong?

    Read the article

  • How to view history of Yum commands (update, install, remove)?

    - by Chris
    I'm seeing some errors in my apache logs and they may (or may not) be related to some packages that I recently installed/removed using Yum. Is there a way to view the history of Yum packages that have been updated/installed/removed ? I could use the "history" command from unix, but some installations may have been done with different accounts. I've tried searching the web and reading the man page too but haven't found anything.

    Read the article

  • Triple (3) Monitors under Linux

    - by widgisoft
    I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

    Read the article

  • Possible DVI Spliter Issues?

    - by Kurru
    Hi I am thinking about buying a DVI splitter cable online and a DVI- HDMI adapter. Can i use these to clone my monitors output so one can go to my monitor, and the other to my projector? Can anyone think of any issues with using the adapter like this? Would there be problems with signal lose or anything? Thanks

    Read the article

  • Active Directory Permission Diag Tool

    - by Skit
    I'm trying to identify potential permission issues on areas of our AD tree. What I have in mind is something like SysInternals FileMon to monitor object access in Active Directory in real time. For example: Adding a computer to the domain. Is there anything like that in the wild? Is there a better way?

    Read the article

  • Windows 7 & Virtual PC and Internet (gateway) problems on host PC

    - by Mufasa
    I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

    Read the article

  • video player recommendation (hardware)

    - by Fuxi
    hi all, i'm looking for a hardware-videoplayer with the following features: support for all kind of video formats from the web (xvid, divx, mpeg ..) w/o problems slots for memory cards like cf/sd usb connector for external devices like hd/usb sticks updateable firmware support for .srt files (subtitles) - option to change eg. fontsize currently i'm having a dvd player with memory slot but it only supports a few formats and it's very annoying having to convert anything - mostly it doesn't work. thx in advance

    Read the article

  • Finding Network Status of specific process name

    - by Moev4
    I am looking for the cleanest way on linux to find the port status for a port being used by a specified program name via the command line. I have seen that netstat -p lists all pids but haven't seen anything corresponding to specific process names. Any help would be appreciated.

    Read the article

  • Create keyboard shortcuts to move/resize windows in Ubuntu

    - by Herms
    On windows I have a few AutoHotkey scripts that let me hit various key combinations to resize windows to particular pre-defined sizes, or move them to certain areas of the screen (or both). I'm wondering how I would accomplish this in Ubuntu (gnome). Most of the searches I did for a linux version of autohotkey seemed to be centered around just setting up simple keyboard shortcuts (key combo X launches app Y, etc). I didn't see anything about scripting window size and placement beyond maximize/minimize.

    Read the article

  • Recover strategy single bad sector in moricon

    - by Damon
    This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

    Read the article

  • Local and public IPs on the same switch?

    - by Andrew
    It's all pretty much in the title. Is it possible to assign both local and public IPs to different nodes connected to the same switch? I have 4 servers with 2 gigabit ethernet ports each. I want one of each to have a public IP, and the remaining ports to have local IPs for server-to-server traffic. Sorry if it's a dumb question. I didn't see anything about it on here already.

    Read the article

  • Best open source server notification software

    - by Adam Evers
    I am looking for an open source notification/monitoring software which will work much like growl does with a mac. It would be awesome if I could receive certain messages to my mac computer from my server when lets say it restarts or some predefined error happens etc. Anyone know of anything like that? I know of Nagios but I am thinking not as complex.

    Read the article

  • Is it possible, via GPO or other method, to turn Internet Explorer's intranet compatibility mode OFF across a domain?

    - by dunc
    Our school's VLE has a few problems when running in IE8/IE9's Compatibility View. Mainly it causes difficulties with uploading files. This problem is easily remedied by un-ticking the Display intranet sites in Compatibility View option from Internet Explorer's Compatibility View options. However, I'm unable to find a way of doing this en masse. I can't find anything regarding this in GPO - would a registry hack or similar do the trick? Thanks in advance,

    Read the article

  • IP address times out

    - by Werner
    I'm running a dedicated server with a couple of game servers running on 4 different IP addresses. The most network-heavy server times out a few times during peak hours and all other communication (FTP/SSH) through the same IP also briefly times out. Other servers using other IPs are fine and unaffected as well as FTP/SSH using other IPs. The server is running Debian 6. What causes this, and is there anything I can do?

    Read the article

  • Linux bonded Interfaces hanging periodically

    - by David
    I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

    Read the article

  • How can I send a Ctrl+Alt+Delete through Remote Desktop in Windows 8?

    - by Tanner
    I need to send a CtrlAltDelete to a remote machine through Remote Desktop. The CtrlAltDelete is being intercepted by Windows 8, regardless of whether the remote desktop has focus or is in full screen. I'm remoting in to a Windows XP machine, and I've tried launching Remote Desktop through both the desktop and the Modern UI. How can I send a CtrlAltDelete? I'd rather not install anything on the machine.

    Read the article

  • cannot change theme and desktop background in ubuntu 10.04

    - by Nrew
    I tried to follow this tutorial frome ghacks.net. But I end up with a bug. Everytime I try to change the desktop background or the theme. It opens up lots of folders. And then close it back again. So I cannot do anything when I try to change the background or the theme to the default. Here is the tutorial And I can't even shutdown my machine now, please help.

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >