Search Results

Search found 7116 results on 285 pages for 'auto roast'.

Page 112/285 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

  • How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

    - by Hanno Fietz
    I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

    Read the article

  • remove registry keys using reg.exe in a batch script

    - by Lex
    I've written this little batch script to help me auto-clean the registries of 300+ identical PC's of some very specific registry keys. It works right up to the point of passing the key variable to the "reg delete %1" command. @echo off C: cd C:\Program Files\McAfee\Common Framework\ framepkg.exe remove=agent /silent setlocal for /F %%c in ('REG QUERY HKLM\SOFTWARE /s^|FIND "HKEY_"^|findstr /L /I /C:"mcafee"') do call :delete %%c endlocal goto :EOF :delete reg delete /f %1 pause Any and all debugging help would be extremely appreciated!

    Read the article

  • Can't get my Raspberry Pi to keep a static IP

    - by JonnyIrving
    I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

    Read the article

  • SCCM SP2 - OOB Management Certificates Problems

    - by Achinoam
    Hi experts, I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

    Read the article

  • Keep remoting into wrong account. Windows 7

    - by Paul
    I have a home theatre PC running with two users accounts on windows 7. The default account logs into locally. The account 'Paul' is present but is denied local log in so the default auto logs in locally. I am trying to remote into account Paul using RDC however it tries to log into the default account and I am presented with an an option to boot the present user off so I can log in. How do I specify which account I want to log into?

    Read the article

  • nvidia on ubuntu 10.10: switching dvi socket

    - by lurscher
    i have ubuntu 10.10 x86_64 with nvidia 9800 gt and nvidia driver version 270.41.06 my video card has two DVI sockets, but i only use single monitor configuration. Now, i think the main DVI socket might be busted, so i want to try to enable the other as the main one, however, i don't know how to achieve that. I tried just plugging the monitor in that socket but it won't just auto-detect (it would have been way too easy to just work)

    Read the article

  • Set a formula on many cells with minimal manual edits

    - by makerofthings7
    I need to set the following formula on many cells: =VLOOKUP(MAX(Historical!$A$5:$FZ$99999),Historical!$A$5:$FZ$99999,7,1) This formula looks up the most recent date in the History table, and returns the value specified. Here I'm returning column 7. How can I paste the cells and auto increment the value where "7" is. In other words I need to paste that summary formula on several hundred cells and change the number 7 for each.

    Read the article

  • lwp-rget changes file format automatically to .bin?

    - by Hector Tosado Jimenez
    Im trying to recursively get an html page to get everything that's there and save it to my directory. Lwp-rget from perl allows me to do this but I'm having the problem that its getting all the files and changing them from .rpm, .xml, .html, etc to .bin. I've been trying to maybe use the --keepext=application/xml or any type but it continues to save the file as .bin. Any way I can stop that auto formatting? Thanks.

    Read the article

  • How to set up cluster with SESSION replication in Coldfusion 10?

    - by user3427540
    I am not able to set up a cluster with session replication. I have successfully set up a cluster with sticky session. When googled I found a lot of links explaining the same issue, like http://cfmlblog.adamcameron.me/2012/11/problem-with-session-replication-with.html https://forums.adobe.com/thread/1238702?start=0&tstart=0 Does deselecting the sticky session auto enables the session replication? But no where i got a solutions. Anyone solved this problem?

    Read the article

  • SCCM SP2 - OOB Management Certificates Problems

    - by Achinoam
    I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

    Read the article

  • Why is the Windows UI responds slowly after being idle for a long time?

    - by John Isaiah Carmona
    I open these applications in my desktop computer: Visual Studio 2010 Professional IBM Lotus Notes Google Chrome And when it is idle for an hour and I restore the windows, the user interface responds very slowly. My computer auto-lock itself after being idle for 5 minutes. I also minimize the applications using a docklet (RocketDock). Why is it slowing down and how can I prevent it from slowing? My OS is Windows XP Professional SP3, Pentum(R) Dual Core @ 2.80 GHz, 1.99 GB of RAM.

    Read the article

  • How to turn a netbook into a powerful street navigator? Inexpensive options ?

    - by iceman
    I want to buy a USB powered GPS module together with a mapping software. Any recommendations and various options that I have ? Much like Garmin's MapSource software and GPS 18 USB: nRoute features an easy-to-use interface, making it intuitive to operate so you can focus on driving. It offers auto-routing and voice-prompting capabilities to virtually any address. The GPS 18 USB includes a 12 parallel channel, WAAS-enabled sensor with USB connection.

    Read the article

  • what's the hostname/domain when installing freebsd

    - by Omu
    I am trying to install FreeBSD using vmware workstation I get to a screen where I have to configure the DHCP (some values are set automatically cuz I've set to configure DHCP auto in options) but the hostname is empty and domainname is .localdomain, what values should I write in there

    Read the article

  • Problems creating service using sc.exe

    - by Shoko
    I have this command to create a service: sc create svnserve binpath="\"C:\Program Files (x86)\Subversion\bin\svnserve.exe\" --service --root C:\SVNRoot" displayname="Subversion" depend=tcpip start=auto obj="NT AUTHORITY\LocalService" Unfortunately, it seems not to work, even though the syntax is correct. When I run it, I get the usage instructions (which I guess is a way of telling me that I've supplied incorrect arguments, although I have no idea what incorrect argument I might have supplied). Can anyone help me out of my difficulty? Thanks!

    Read the article

  • 2 sets of tabs in google chrome

    - by Ben
    I usually have 2 sets of tabs in google chrome, in 2 windows. 1 for general browsing, and the other for 'work'. Can I get both windows to auto launch at start, populated with their respective tabs? Thanks

    Read the article

  • Cannot reset an network interfaces without a reboot

    - by yangchenyun
    I have edited the /etc/network/interfaces file and I use the sudo /etc/init.d/networking restart. After restart, the eth1 interfaces don't setup properly. I need a hard reboot to enable this configuration. Meanwhile the command line hints: Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces. Am I using the run command to restart network interfaces? auto eth1 iface eth1 inet static address 192.168.1.87 netmask 255.255.255.0 gateway 192.168.1.1

    Read the article

  • Applications Deployment with MDT

    - by beakersoft
    I have added a install for Silver light to my MDT server, so it can get installed when the image gets deployed. When I boot them machines it is asking me to install the applications, how can i get it to auto install the apps without prompting. I have added this line to the rules - I thought that would but seems to make no difference. I'm sure i must have missed something somewhere? Cheers Luke

    Read the article

  • Can't validate mine, sudo nor root in Debian "Jessie" Gnome anymore?

    - by Janar
    I'm Debian beginner & GUI guy in a bit of trouble? Can't login as sudo/gksu/root/su nor as (main/super)user after removed user password via Gnome-user-settings. History of actions (Probably irrelevant though) Installed Debian "Jessie" GNU/Linux with xFce GUI (en-US) as only OS. HardWare is ThinkPad w510. Skipped root user password in setup, to get sudo for superuser easily. Logged in (as always had) with Gnome (3.4.x), not once with xFCE. (installed Xfce. Installed xFce only to achieve more control (easier management) over packages this way, to set-up gnome much more by mine likes. Added more jessie repros (same ones as in Wheesy stable by default but for Jessie as, Jessie only had repros for security updates by default). Installed lots of gtk(3) & gnome(3) based soft; (- restarted again after this) Installed propietary graphics card driver for mine nvidia quadro. (- restarted once again after that one) Installed more stuff related to mine work/school/devel. The actual problem Had a plan to restart again, but wanted to set up auto-login first, instead set user password to none (don't ask why / perhaps caused by being awake for a looooong time), noticed it, and set also to auto-login, but couldn't undo mine previous mistake to create new password for me. As mine password is set to none I would have expected that simply return in pass prompt for emty password field would do, but it won't authenticate. I tried Alt+F2 "gksu gedit" as well as: sudo wget "https://www.some-page.eu/file.ext" and "su" in terminals, none has applied (quite logical actually - as I'm sudoer and highest ranked super user, besides only user in computer). Current stand Everything worked & still works nice after this accident, besides this password prompts part. To spoked to log-out nor restart. Synaptic package-manager is still open with root rights (only one, that has left open prior to the issue and not closed since, just in case). Goggled for help and read some manuals/faqs/how-tos - mostly lead to sudoers file management, but not found one specifically for mine issue - so still not any smarter. Really hope, that I don't have to redo OS inst all over again, by just one stupid mistake. Thanks for your reply :-)

    Read the article

  • Have a process which runs nightly to automatically zip old files?

    - by esac
    I have a file share, and I want a process which enumerates files on that share and automatically creates a 7z self-extracting exe of files over 1 month old. On a different share, I want to create a 7z self-extracting exe of directories that are over 1 month old. Any idea if there is a program which can do this? I already have 7z a -t7z -mx9 -sfx filename.exe filename.txt Portion of it, just need more of the auto-management portion.

    Read the article

  • Running multiple versions of Firefox

    - by nicole
    I've been reading this: http://support.mozilla.org/en-US/questions/797010#answer-193690 But it looks like it only applies to running multiple versions of Firefox when it's Firefox 4. I need to run Firefox but it seems like a lot of my clients are still running versions of Firefox 3 (is this an operating system issue? Doesn't Firefox auto-update?) so I need to run 3 plus the latest version to troubleshoot some css issues...

    Read the article

  • Linux depends hell when installing a small mp3 player...

    - by smwikipedia
    I try to install a small audio player named "Audacious" with the following command: sudo apt-get install audacious and it tells me that it depends audacious-plugins, so I try to install the audacious-plugins, one thing leads to another, there're numerous depends and it is just impossible to install all of them manually... Is it even possible to install a software on ubuntu linux? Is there a way to auto install all the depends? (I have never seen such a stupid software manager.) Many thanks.

    Read the article

  • Multiple virtual VLAN interfaces on single NIC (Debian)

    - by RayQuang
    I'm trying to setup multiple virtual interfaces with VLAN's on a single NIC. I'm running Debian Squeeze. Currently this is my /etc/netowrk/interfaces auto eth0.10 iface eth0.10 inet dhcp This gives me a working connection, however I'm not sure how to configure several like these on a single NIC so I can use multiple external IP's. I have tried aliasing the VLAN's like so: iface eth0.10:1 But that was not successful and it said failed to bring up interface. And suggestions would be greatly appreciated :)

    Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >