Search Results

Search found 5793 results on 232 pages for 'ftp sync'.

Page 112/232 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Unable to get squid working for remote users

  - by Sean

  I am trying to setup squid 3.2.4, but I have not been able to get it working for remote users. Works fine locally. Unable to figure out what I am doing wrong... http_port 3128 transparent ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/usr/share/ssl-cert/myCA.pem refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 acl localnet src 10.0.0.0/8 # RFC 1918 possible internal network acl localnet src 172.16.0.0/12 # RFC 1918 possible internal network acl localnet src 192.168.0.0/16 # RFC 1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access allow localhost http_access allow localnet http_access allow all cache deny all via off forwarded_for off header_access From deny all header_access Server deny all header_access WWW-Authenticate deny all header_access Link deny all header_access Cache-Control deny all header_access Proxy-Connection deny all header_access X-Cache deny all header_access X-Cache-Lookup deny all header_access Via deny all header_access Forwarded-For deny all header_access X-Forwarded-For deny all header_access Pragma deny all header_access Keep-Alive deny all acl ip1 localip 1.1.1.90 acl ip2 localip 1.1.1.91 acl ip3 localip 1.1.1.92 acl ip4 localip 1.1.1.93 acl ip5 localip 1.1.1.94 tcp_outgoing_address 1.1.1.90 ip1 tcp_outgoing_address 1.1.1.91 ip2 tcp_outgoing_address 1.1.1.92 ip3 tcp_outgoing_address 1.1.1.93 ip4 tcp_outgoing_address 1.1.1.94 ip5 tcp_outgoing_address 1.1.1.90

  Read the article

• Refresh file access time under Linux / Discard disk read cache

  - by calandoa

  I am making use of the access time to analyse some build process, but it is not working the way I want: the access time is updated the first time I read the file, then it stays the same for a long while, or until the next reboot. For instance: $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 10:03 some_file $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time is updated # waiting a few minutes... $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time has not been updated :( I suppose that the file is buffered by Linux in the free memory, the only this copy is accessed the subsequent times for speed reasons. A solution would be to discard the buffers in memory. After searching some forums, I found: sync echo 1 > /proc/sys/vm/drop_caches echo 2 > /proc/sys/vm/drop_caches echo 3 > /proc/sys/vm/drop_caches But it is not working, it seems that it only sync up the write buffers, not the read ones. May be it is due to some custom kernel configuration on my distro (fedora 9)? Or I am missing something here? Is there a way to achieve this access time refresh? Note also that I do not want to simulate some writes on my entire file tree. Because I am using some makefile based build system, this will cause the entire project to be build again.

  Read the article

• CentOS networking BNX2

  - by james moore

  Having some trouble with my NICs. The server starts fine and I can wget/ping etc. However, when I /etc/init.d/networking restart I then receive the following error: Bringing up interface eth0: bnx2: fw sync timeout, reset code = 1030009 SIOCSIFFLAGS: Device or resource busy Consequently, the task fails. I have searched around on google users suggesting to disable PNP in the BIOS but I see no option. Here is some system information: $ ethtool -i eth0 driver: bnx2 version: 2.0.8-rh firmware-version: bc 2.9.1 $ uname -a Linux host 2.6.18-238.9.1.el5 #1 SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux $/sbin/lspci | grep Broadcom 04:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) 08:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) $ lsmod | grep bnx2 bnx2i 81704 0 cnic 109512 1 bnx2i libiscsi2 77765 6 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi_tcp scsi_transport_iscsi2 73945 8 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2 bnx2 224780 0 scsi_mod 199001 15 mpt2sas,scsi_transport_sas,mptctl,be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sg,libata,megaraid_sas,sd_mod $ rmmod bnx2; modprobe bnx2 PCI: Enabling device 0000:05:00.0 (0158 -> 015a) PCI: Enabling device 0000:09:00.0 (0158 -> 015a) bnx2: fw sync timeout, reset code = 10300003 Any help would be appreciated as I am at a loss.

  Read the article

• Dedicated server automatic backup solution

  - by Luigi

  I have a dedicated Ubuntu web server in a cloud environment, and I am looking for a nice way to do automated backups. I would like to backup some directories with web apps, and all my MySql databases. As for destination: make snapshots every two hours localy, and every six hours to a remote ftp server. Also delete backup archives older than seven days(localy + ftp), and notify on any problems by email. Now to achieve some of this functionality I use cron + shell script, and http://www.mysqldumper.net/, but really that doesn't answer my needs. Mysqldumper doesn't know automaticly about new databases, and shell script does not notify on problems. It's something I have to check out from time to time, and i don't have trust for. I googled a while, and seems like most people solve this stuff with shell scripts. Is this a method you can trust? Are there any web-gui tools, I'm missing? Maybe there is a smarter startegy for doing this? I'm a little bit confused.

  Read the article

• How can I tell SELinux to give vsftpd write access in a specific directory?

  - by Arcturus

  Hello. I've set up vsftpd on my Fedora 12 server, and I'd like to have the following configuration. Each user should have access to: his home directory (/home/USER); the web directory I created for him (/web/USER). To achieve this, I first configured vsftpd to chroot each user to his home directory. Then, I created /web/USER with the correct permissions, and used mount --bind /web/USER /home/USER/Web so that the user may have access to /web/USER through /home/USER/Web. I also turned on the SELinux boolean ftp_home_dir so that vsftpd is allowed to write in users' home directories. This works very well, except that when a user tries to upload or rename a file in /home/USER/Web, SELinux forbids it because the change must also be done to /web/USER, and SELinux doesn't give vsftpd permission to write anything to that directory. I know that I could solve the problem by turning on the SELinux boolean allow_ftpd_full_access, or ftpd_disable_trans. I also tried to use audit2allow to generate a policy, but what it does is generate a policy that gives ftpd write access to directories of type public_content_t; this is equivalent to turning on allow_ftpd_full_access, if I understood it correctly. I'd like to know if it's possible to configure SELinux to allow FTP write access to the specific directory /web/USER and its contents, instead of disabling SELinux's FTP controls entirely.

  Read the article

• "unrecognized options" while installing php

  - by user1692333

  I want to compile php 5.4.8 on my mac 10.8.2, but get some errors which cant solve by my self, so need your help. Firstly i get default php options with php -i | head, after it do this command ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --sysconfdir=/private/etc --with-apxs2=/usr/sbin/apxs --enable-cli --with-config-file-path=/etc --with-libxml-dir=/usr --with-openssl=/usr --with-kerberos=/usr --with-zlib=/usr --enable-bcmath --with-bz2=/usr --enable-calendar --disable-cgi --with-curl=/usr --enable-dba --enable-ndbm=/usr --enable-exif --enable-fpm --enable-ftp --with-gd --with-freetype-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-jpeg-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-png-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --enable-gd-native-ttf --with-icu-dir=/usr --with-iodbc=/usr --with-ldap=/usr --with-ldap-sasl=/usr --with-libedit=/usr --enable-mbstring --enable-mbregex --with-mysql=mysqlnd --with-mysqli=mysqlnd --without-pear --with-pdo-mysql=mysqlnd --with-mysql-sock=/var/mysql/mysql.sock --with-readline=/usr --enable-shmop --with-snmp=/usr --enable-soap --enable-sockets --enable-sqlite-utf8 --enable-suhosin --enable-sysvmsg --enable-sysvsem --enable-sysvshm --with-tidy --enable-wddx --with-xmlrpc --with-iconv-dir=/usr --with-xsl=/usr --enable-zend-multibyte --enable-zip --with-pcre-regex --with-pgsql=/usr --with-pdo-pgsql=/usr But get this error config.status: creating Makefile config.status: creating jconfig.h config.status: jconfig.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --enable-cli, --with-config-file-path, --with-libxml-dir, --with-openssl, --with-kerberos, --with-zlib, --enable-bcmath, --with-bz2, --enable-calendar, --disable-cgi, --with-curl, --enable-dba, --enable-ndbm, --enable-exif, --enable-fpm, --enable-ftp, --with-gd, --with-freetype-dir, --with-jpeg-dir, --with-png-dir, --enable-gd-native-ttf, --with-icu-dir, --with-iodbc, --with-ldap, --with-ldap-sasl, --with-libedit, --enable-mbstring, --enable-mbregex, --with-mysql, --with-mysqli, --without-pear, --with-pdo-mysql, --with-mysql-sock, --with-readline, --enable-shmop, --with-snmp, --enable-soap, --enable-sockets, --enable-sqlite-utf8, --enable-suhosin, --enable-sysvmsg, --enable-sysvsem, --enable-sysvshm, --with-tidy, --enable-wddx, --with-xmlrpc, --with-iconv-dir, --with-xsl, --enable-zend-multibyte, --enable-zip, --with-pcre-regex, --with-pgsql, --with-pdo-pgsql Maybe someone have some suggestions on this?

  Read the article

• Pattern matching gnmap fields with SED

  - by Ovid

  I am testing the regex needed for creating field extraction with Splunk for nmap and think I might be close... Example full line: Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 5.9p1 Debian 5ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 2.2.22 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 2.6.32 - 3.2 Seq Index: 257 IP ID Seq: All zeros I've used underscore "_" as the delimiter because it makes it a little easier to read. root@host:/# sed -n -e 's_\([0-9]\{1,5\}\/[^/]*\/[^/]*\/\/[^/]*\/\/[^/]*\/.\)_\n\1_pg' filename The same regex with the escape characters removed: root@host:/# sed -n -e 's_\([0-9]\{1,5\}/[^/]*/[^/]*//[^/]*//[^/]*/.\)_\n\1_pg' filename Output: ... ... ... Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 2.0p1 Debian 2ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 5.4.32 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 9.8.76 - 7.3 Seq Index: 257 IPID Seq: All zeros ... ... ... As you can see, the pattern matching appears to be working - although I am unable to: 1 - match on both the end of line ( comma , and white/tabspace). The last line contains unwanted text (in this case, the OS and TCP timing info) and 2 - remove any of the un-necessary data - i.e. print only the matching pattern. It is actually printing the whole line. If i remove the sed -n flag, the remaining file contents are also printed. I can't seem to locate a way to only print the matched regex. Being fairly new to sed and regex, any help or pointers is greatly appreciated!

  Read the article

• Mac OS Leopard: SyncServer process constantly using 100% CPU

  - by macca1

  I am running Leopard that I upgraded from Tiger. I've been noticing that every once in a while the SyncServer process starts up and eats up all the CPU. The fans will start going at full blast and the laptop will slow down to a crawl. I need to force quit the process from Activity Monitor to get it under control. It disappears for a while, but eventually gets started again. I do have an iphone as well that I sync so I'm wondering if syncServer might be an apple process checking for my phone plugged in. Edit: Tried iSync and the manual resetsync as suggested, but got this output: Vince-2:~ vince$ /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl full 2010-03-12 08:03:50.230 perl[176:10b] SyncServer is unavailable: exception when connecting: connection timeout: did not receive reply PerlObjCBridge: NSException raised while sending reallyResetSyncData to NSObject object name: "ISyncServerUnavailableException" reason: "Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))" userInfo: "" location: "/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl line 16" ** PerlObjCBridge: dying due to NSException Vince-2:~ vince$ And during that syncServer started spinning up 95-100% just like it always does.

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• Can I configure Thunderbird 3 to refresh the folder list for an Exchange IMAP account?

  - by Howiecamp

  Background: When used as an IMAP client against Gmail, Thunderbird 3 (may be the case in v2 also, not sure) will refresh it's list of folders (the folders correspond to Gmail labels) when you do "Download/Sync Now..." or restart the Thunderbird client. Any new folders (labels) created in Gmail will sync to the client and any folders moved/changed/deleted folders in Gmail will move/change/delete on the client as well. (Note: Thunderbird has the concept of "subscribing" to IMAP folders (assumingly allowing you to determine which folders you want, rather than bringing all of them down and dragging loads of data across the wire). When used against Gmail, Thunderbird appears to automatically subscribe to all folders (including when folders are newly created in Gmail), so this might be why the refresh is happening properly.) This behavior is what I want with Exchange. When using Thunderbird with Exchange (2007), the folder list doesn't refresh when folders are added/changed/deleted on the server and/or from a different mail client. When I look at the subscription options, some are checked and some are not (not sure why Thunderbird picked some and not others). And when I add new folders on the server and/or from another client, they never even appear in Thunderbird's list of folders, preventing me from subscribing to them.

  Read the article

• Digitize video?

  - by kire

  I got some movies on a VCR that i want to move to my computer somehow. (for personal use) I have a video capture card and all hardware required. I'm looking for the software - programs, codecs etc. I like the format that most torrents come in and got some of these i'd like to use as reference for comparison. How can i see what codec, bitrate, etc a movie is using so i can pick this and know that it will work and look good. For AVI-files the bitrate is visible in explorer but it doesn't mention the codec used and i also have a lot of MKV-files that explorer can't handle. All kinds of tips, tricks and other suggestions are welcome. This is completely new to me. How do I avoid that video/audio gets out of sync for example, many movies you download have audio out of sync so i guess this can happen quite easily. The encoding-program has to run on windows and for playback the movies should work on at least VLC for windows.

  Read the article

• Looking for an application to record audio and video on a linux "embedded" device

  - by Luke404

  I am working with a linux x86 device with limited CPU resources (as a prototype we just use a pentium-m netbook). We'd like to record video from one V4L2 device (we'll probably end up using just USB Video Class devices like all modern webcams) and one audio stream from an ALSA source. The thing will not have screen and keyboard, and obviously no X11 environment. Goals are: do as little work as possible to cope with little cpu resources - for example I'd like to record video in the native MJPEG I get out of the UVC devices encoding audio to MPEG3 Layer-2 (aka mp2) is ok since it let us save a lot of space (compared to raw pcm samples) and does use little cpu power I don't mind loosing some video frames here and there (UVC devices do that) as long as I can get audio and video streams syncronized not require user input to start the thing (a python script takes care of initialization, startup, shutdown, etc...) be able to open the resulting files for postprocessing without too much effort (ie, if mplayer or vlc can play it, it's fine) So far the only app I found that could be started from command line and record V4L2 video + ALSA audio is mencoder but I'm having some difficulties with it. It should be able to do that but I cannot record audio and video together - just one of the two. And if I use two different processes to record to two different files I have no means to get them in sync (audio is more or less always correct, but video framerate will vary over time and it seems to lack timestamps to correctly play it back to the correct time). Long story short, how do you record an unconverted MJPEG stream (from an UVC device) and an audio stream (from an ALSA device, possibly encoding to any standard format) using a command line tool, to a single file (MPEG or any other container), keeping audio and video in sync?

  Read the article

• Cisco Router - Add a missing MIB file

  - by Jonathan Rioux

  I have a Cisco 881w, and I would like to setup NBAR in my NetFlow Analyzer. But it says that my router misses this MIB in order to allow NFA to poll the router with snmp to get NBAR infos. From the FAQ page of the NetFlow Analyzer website, it responds to my error: Q. I am able to issue the command "ip nbar protocol-discovery" on the router and see the results. But NFA says my router does not support NBAR, Why? A. Earlier version of IOS supports NBAR discovery only on router. So you can very well execute the command "ip nbar protocol-discovery" on the router and see the results. But NBAR Protocol Discovery MIB(CISCO-NBAR-PROTOCOL-DISCOVERY-MIB) support came only on later releases. This is needed for collecting data via SNMP. Please verify that whether your router IOS supports CISCO-NBAR-PROTOCOL-DISCOVERY-MIB. The missing MIB is: CISCO-NBAR-PROTOCOL-DISCOVERY-MIB I found it here: ftp://ftp.cisco.com/pub/mibs/v2/CISCO-NBAR-PROTOCOL-DISCOVERY-MIB.my But how can I add this MIB into the router? The IOS of my router is: c880data-universalk9-mz.151-3.T1.bin

  Read the article

• ProFTPD / PAM issues with new centos/virtualmin install

  - by iamthewit

  Hi All, I just installed CentOS 5.4 on a rackspace cloud server and installed virtualmin which all seemed to go fine. The only problem I have is that I can not access the virtual servers directories via FTP. I get the following from filezilla: Status: Connecting to 1.1.1.1:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: USER username Response: 331 Password required for username. Command: PASS ******* Response: 230 User username logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (1,1,1,1,216,214) Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing and I get this from my /var/secure/log file Sep 22 19:40:42 stickeeserver proftpd: pam_unix(proftpd:session): session opened for user username by (uid=0) Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - USER nastypasty: Login successful. Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - Preparing to chroot to directory '/home/username' Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - mod_delay/0.5: delaying for 728 usecs Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - error setting IPV6_V6ONLY: Protocol not available Any help would be greatly appreciated, I'm not totally new to Linux but it's not my strongest subject. I do like to know exactly why problems occur though and how exactly to fix them so the more detail the better! cheers

  Read the article

• Rsync Push files from linux to windoes. ssh issue - connection refused

  - by piyush c

  For some reason I want to run a script to move files from Linux machine to Windows. I have installed cwRsync on my windows machine and able to connect to linux machine. When i execute following command: rsync -e "ssh -l "piyush"" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" Where 10.0.0.60 is my widows machine and I am running above command on Linux - CentOS 5.5. After running command I get following error message: ssh: connect to host 10.0.0.60 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8] [root@localhost sync]# ssh [email protected] ssh: connect to host 10.0.0.60 port 22: Connection refused I have modified my firewall settings on widows to allow all ports. I think this issue is due to SSH Daemon not present on my windows machine. So I tried installing OpenSSH on my machine and running ssh-agent but didn't helped. I tried similar command to run on my widows machine to pull files from Linux and its working fine. For some reason I want command for Linux machine so that I can embed it in a shell script. Can you suggest me if I am missing anything.

  Read the article

• NVIDIA Tesla K20C in Dell PowerEdge R720xd --- power cables

  - by CptSupermrkt

  I am trying to put an NVIDIA Tesla K20C into a Dell PowerEdge R720xd. I'm having a bit of trouble understanding the power requirements of the card. First, here is a picture of two pages of the same manual, which seems contradictory to me. One page says only a single connector is required, while the next page says both are required. The entire manual for the card can be found here: http://www.nvidia.com/content/PDF/kepler/Tesla-K20-Active-BD-06499-001-v02.pdf Here is an photo taken of the power connections on the card: And here is a photo of where those connectors need to go, onto the PCI-E riser of the r720xd: Neither the R720xd NOR the GPU came with the necessary cables. And given what appears to be a contradiction in the GPU manual (above), I'm not even sure at this point what we actually need. I have searched high and low online for things like 2x6 pin PCI-E to 8 pin male-to-male and so on, and for the life of me cannot find what we need. In case anyone needs it, the owner's manual of the R720xd can be found here: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r720xd_Owner%27s%20Manual_en-us.pdf The relevant page is page 68, which clearly indicates that the 8-pin female port on the riser card is for a GPU. The bottom line question: exactly what power cables do we need to buy, and where can we find them?

  Read the article

• Installing and running a guest OS on KVM-qemu with only serial console access

  - by nixnotwin

  I am trying to installing a bsd distro with virt-installer. With a Linux distro I used this: virt-install -n debian -r 1024 --vcpus=1 --accelerate -v --disk /var/kvm/installation-disks/debian.img,size=6--nographics --network=bridge:br0,model=ne2k_pci,mac=52:54:00:66:68:09 -l http://ftp.de.debian.org/debian/dists/squeeze/main/installer-amd64/current/images/ -x console=ttyS0,115200 This loads the installer directly from the online mirror. With Fedora I used this mirror: http://www.nic.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/16/Fedora/x86_64/os/ Are there such mirrors for freebsd or openbsd? The reason I want direct installable ftp/http mirrors is because I can access my physical server only via ssh, and it doesn't have a X server or a window manager to give me a VNC GUI. When I tried installing centos 6 with an online mirror I was able to finish the installation via serial console, but after I rebooted it, the serial console never worked for me. I tried everything possible---editing menu.lst, inttab and securtty files. Fedora 16 booted fine from serial console, but got stuck when it loaded anaconda installer. I tried editing freebsd iso installation media by adding serial console option to boot option. And installation was successful. But couldn't boot into it becuase it wasn't giving console acess. I couldn't edit any files as ufs partition cannot be loaded with write access on my Ubuntu server 10.04. Only debian squeeze worked well, it worked for me even without editing a single configuration file. I want to have CLI versions of fedora/centos and freebsd/openbsd. But, looks like there isn't any hope for me to have them, as I have to depend on a serial console to do everything.

  Read the article

• Limit copssh users to home directory Windows 7

  - by Siriss

  Hello all- I have found these two sites below: CopSSH SFTP -- limit users access to their home directory only and http://blogs.windowsnetworking.com/wnadmin/2006/11/07/copssh-restricting-users-access/ as well as the Copssh website, but upon completion they do not seem to work. I have copssh installed and I have a separate Windows account "sftpuser" created that is used to connect. The connection works just fine, but I want to limit that user to just their home directory and sub folders. I have 3 hard drives, the C:, a W: and an S: and I want the FTP account to only be able to access the W: drive and its contents (the root of the W: drive is the FTP home directory). Right now "sftpuser" can access all folders, including jump drives to C:, and S:. The linked tutorials do not seem to work, because it seems when I create a group "ftpusersgroup" and add "sftpuser" to the group, and then deny "ftpusersgroup" access to the C: drive, the service breaks and I can no longer login. I have undone everything and am ready to start fresh. Does anyone know how to do this, or is there a better tutorial that someone has or has found? I hope this makes sense. Thank you very much for any help!

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• What does this diagnostic output mean?

  - by ChrisF

  I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

  Read the article

• Thunderbird does not delete messages from the POP server

  - by Max888

  Thunderbird does not delete messages from the POP server. I am a Yahoo Plus user and I can download messages from the inbox in Thunderbird from the Yahoo POP3 server. However, I want to delete read messages directly on the email client rather than go to Yahoo mail. When I do this, emails are still on the server In accounts setting, I have the following options ticked: -Automatically download new messages -Leave messages on server, Until I delete them Thanks for any guidance Update: Thanks for the replies so far. Some clarification: I do want to keep some messages on Yahoo for filling them in my online folders, hence the reason I do not download ALL my messages to Tbird and delete server message automatically **Update 2: Cracked it!! OK, boys and girls, here is the way to do it. Go to Options- Advanced - Config Editor find the Name 'mail . pop3 . deleteFromServerOnMove' Set it to True True: Delete the copy of the message on the POP3 server if you move or delete the message. False(default): Only delete the copy of the message on the POP3 server if you delete the message. That's it, restart Thunderbird. You need to press 'Get Mail' everytime you want to sync with the email server, in order for you to make sure messages in the application is in sync with the email server.**

  Read the article

• Port 22 is not responding

  - by Emanuele Feliziani

  I'm trying to make the jump to VPS from shared hosting for better performances and greater flexibility, but am stuck with the fact that I can't access the machine via ssh. First of all, the machine is a CentOS 6.3 cPanel x64 with WHM 11.38.0. Sshd is running (it appears in the current running processes). Making a port scan I see that port 22 is not responding. Port 21 is, but I am not able to access the machine via ftp (I think it's a security measure, but I don't know where to disable/enable it). So, I'm stuck in WHM and have no way to access the configuration of the machine, neither via ssh nor with ftp/sftp. When trying to connect with ssh via Terminal I only get this: ssh: connect to host xx.xx.xxx.xxx port 22: Operation timed out I also tried to access with the hostname instead of the IP address and it's the same. There seem to be no firewall in WHM and I have whitelisted my home IP address to access ssh, though there were no restrictions in the first place. I have been wandering through all the settings and options in WHM for several hours now, but can't seem to find anything. Does anybody have a clue as to where I should start investigating? Update: Thanks everyone. It was in fact a matter of firewall. There was a firewall not controlled by the WHM software. I managed to crack into the console from the vps control panel (a terrible, terrible java app that barely took my keyboard input) and disabled the firewall altogether running service iptables stop so that I was able to access the console via ssh with the terminal. Now I will have to set up the firewall again because the command I ran looks like having completely wiped the iptables. Can you recommend any newby-friendly resource where I can learn how to go about this and what should I block? Or should I just go with something like this: http://configserver.com/cp/csf.html ? Thanks again to everyone who helped me out.

  Read the article

• Exchange 2003 ActiveSync problem with certificate

  - by colemanm

  We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

  Read the article

• How to re-add a RAID-10 failed drive on Ubuntu?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

  - by Stephen

  I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >