Search Results

Search found 9418 results on 377 pages for 'george boot'.

Page 112/377 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Cannot access boot menu with compaq 8510p

  - by pinouchon

  I have a problem with my HP compaq 8510p laptop: when I start it, the fan starts and the power light is on, but the screen displays nothing. When I insert a bootable hard drive, it activates the hard drive light (meaning that the CD is recognized) but it stops after a few seconds. Same thing with any hard drive: the drive is recognized but does not boot. What I've tried so far: Changing the hard drive or booting with no hard drive (same problem) Plugging anoher display via VGA : no display on the other screen Inserting a windows-7 CD (same problem) Booting only on battery, with battery and power cable, only with power cable (same problem) So it looks like something is preventing the laptop from booting and displaying the boot menu. Do you have experienced something similar with a laptop ? What could be wrong ? The laptop is out of warranty. The system used to be windows-7 x64. Edit: I went to the help desk of my university. A guy took a look (he also tried to plug an external screen) and said that the computer is dead: on the HP laptops eventually the GPU card dies and so does the motherboard because they are linked. He saw this many times, and even if I can fix the problem, the laptop would crash again after a while. Do you have similar experience with HP laptops ? (mine is 4 years old) Edit 2: Believe it or not, my laptop is magically working again. I have no clue about what is going on. Now it is like starting and old car: when you turn it on you secretly hope it will actually start... With that said, I expect my laptop to break again in the near future (its an HP after all) and I will accept an answer or add my own accordingly. Edit 3: As expected, the laptop is down again. This time, sometimes when I power it up, it shuts down automatically after 3 seconds, sometimes not at all. In addition, when it does not shut down on its own, the power button does not work : the only way to shut it down is by unplugging the battery. As before, the screen is black, and only the power and battery lights are on. (the other ones: hard drive and wifi are off). I have tried to plug in another power plug, removing the battery and removing the hard drive without success. I might buy another laptop. I've brought the laptop to a repair shop. The problem is indeed that the graphic card is down. It will be replaced by a new one.

  Read the article

• Using FlashCache on /var on startup

  - by WinkyWolly

  I would like to have FlashCache cache my /var partition however I can't seem to get it to play nice upon bootup (IE: not really sure how to do it). I'm not sure if I need to modify the initramfs/use DKMS or if I can do it in user-land during bootup. The issue I'm running into is /var mounts early and therefore the device is busy (whether it by generally by syslogd). I'm positive this can be resolved by modifying the initramfs although I simply haven't fiddled with it enough to get it working. They have instructions on how to boot your root partition however I'm not sure if these instructions would apply to my use case. Any help / pointers in the right direction would be absolutely splendid.

  Read the article

• Computer not booting, black screen, no beeps

  - by Michael Gaddass

  I bought a pre-owned computer on Ebay. It booted fine, had to reset due to it not detecting USB mouse, but it detected the USB keyboard. Booted fine again, then I tried to install Ubuntu Desktop, when it was installing I got a phone call, when I'm answering it, I find a Blue screen of Death. I reboot the computer and nothing, no BIOS boot, no beeping, but one of the fans was on. I opened the cover and found a large amount of dust, removed it, still not booting. I'm a complete novice with computer repairs, the most advanced thing I did was take a 286 harddrive and replace a 486's damaged harddrive with it (put the drive into the 486 that is), what could possibly be causing this?

  Read the article

• Backup windows image to thumb drive?

  - by Dean

  I recently bought a new netbook from Malasia. It doesn't have a brand name, or officially supporting drivers. It came with a version of windows, and working drivers for all the hardware - but I want to install Ubuntu on here. Being a netbook, it has no CD/DVD drive. I want some free easy to use software to image the entire drive onto a thumb drive, which I could later use to boot up a recovery program to reinstall windows, should I fail to get all the hardware supported on Linux. I have already done some research and found driver backup/restore software in this thread, and will probably use that failing a more all-encompasing solution.

  Read the article

• Is it possible to run my other partition inside of a VM?

  - by Parris

  So I have dual boot machine with windows 7 and ubuntu 11. I would like to, at times, run a vm from one partition to another. For example sometimes I would like to do certain things in windows while still using ubuntu. At other times, perhaps the opposite would be more effective. Why? Well running a vm is fairly resource intensive, and depending on what I am doing primarily I would rather be in one operating system vs the other, or perhaps it is just convenient. An important consideration is that you should NOT need to "copy" or "duplicate" the partition in any way. The VM should just read the partition as if it were a standard image. Any ideas? I am using virtual box currently. I have also used virtual pc. I could probably get a copy of vmware workstation if needed.

  Read the article

• Windows 7 Install command prompt can't access the C drive

  - by theouteredge

  I'm trying to create a new Windows 7 Professional VHD which I can dual boot to, following Scott Hanselman's guide to creating a bootable VHD. When I get to the command prompt in the Windows 7 installation and try to create a VHD or select/attach a pre-created VHD file I get an error saying that diskpart can't find the path specified. If I try and switch to the c drive using cd c: I see c:\ x:\something\> I already have a Windows 7 Ultimate install and my C drive is an SSD – if that makes a difference.

  Read the article

• Procedure for dual booting (2 copies of Win-7) off 2 partitions on same disk

  - by Sam Holder

  What procedure should I follow to set a dual boot (both Win-7 x64) on a machine where (ideally): Both operating systems will be installed on the same physical disk in different partitions When booting into either operating system the contents of the other OS partition disk will not be seen (this just seems safer) Other hard drives in the system will be visible by both OS's 1 copy of Win7 is already installed. Is it as simple as shrinking the existing volume and creating the partition, then sticking the CD in and booting off it and formatting the new partition and then installing another copy of windows onto the new partition? Or will that not work? Or are there gotchas?

  Read the article

• Cannot install boot camp 3.1 drivers on windows 7

  - by Chris

  Hi all, I have a 64 bit windows 7 install (thru bootcamp) on my 17" macbook pro, with the bootcamp 3.0 drivers. Whenever i run the apple software update to install the 3.1 drivers, it downloads and installs them, then reboots, and when i've rebooted, it's still stuck on version 3.0 according to 'about boot camp' on the system tray icon. I've tried installing several times, it keeps happening. Any ideas? Thanks

  Read the article

• Bootcamp: setup of Windows 7 (64 bit) hanging at "disk.sys"

  - by Skade

  I am having trouble getting Windows 7 Professional (64bit) to install on a Macbook Pro (late 2010 model). The installer hangs when loading the setup from disk. When restarting, I get an option to boot Windows from disk. The installer then starts loading files from disk and suddenly hangs. Using "Safe Mode" (from the advanced menu), it tells me that the installer hangs when loading "disk.sys". The installation is made on a fresh Bootcamp partition, the disk uses GPT. Has anyone seen this before and maybe found a solution?

  Read the article

• Why am I having trouble loading Ubuntu alongside Windows as an application?

  - by STEVE PEAVEY

  I have two good CD ISO files. Both load OK, but when I boot to Ubuntu the screen is fragmented by dozens of white lines. Program works but is useless. I'm running Windows XP SP3 on D201GLY MB, CELERON CPU 220 1.02 GHZ, 512 RAM What could be my problem? CPU? Not enough RAM? Or maybe even the graphics card? to be clearer i am trying to load either ubuntu 8.04 or 9.04 inside windows as an aplication from known GOOD cd's. trying to load with the wubi installer that is loaded on the cd's. sis mirage graphics 32mb vid prosser sis 662.

  Read the article

• Move Windows 7 installation to Mac Boot Camp

  - by stevehorn

  I'm thinking about getting a Mac, and wondering about my options for transferring my current Windows installation to a Boot Camp partition. Are there any tools that will allow me to accomplish this?

  Read the article

• How to remove unwanted entries in the grub boot loader

  - by Nrew

  How to remove unwanted entries in the grub boot loader? There is still an entry for vista even if its not existing anymore. And the Memtest entry its also not needed. How do I remove those from ubuntu 10.04

  Read the article

• Ubuntu server boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails.

  Read the article

• Which CD Drive is used during boot if have multiple drives

  - by Mirage

  I have 7 CD Drives attached to my computer. Now i want to install Linux on computer. But i am not sure which drive is used when i boot. I tried once putting in any drive. The Linux starts but after sometime it says there is Ubuntu Live CD present. I tried pn computer with one drive and it worked perfectly

  Read the article

• Computer loads BIOS, but won't load OS

  - by LEGEND383

  I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

  Read the article

• OS won’t boot during Visual Studio 2010 install on vista 64

  - by Noam Honig

  I am installing Visual Studio 2010 on a vista 64 bits machine. During the install it asked for a restart. Since that, vista won't load. I tried restore to previous good configuration - didn't help. I am only able to boot it using safe mode with networking. When I did that, it continued the vista part of the install (the screen with the 3 out of 3 updates) but after that when I restarted again - still fails.

  Read the article

• Computer restarts infinitely after Bios/Motherboard screen

  - by user13176

  Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

  Read the article

• Problems with uninstallation of windows 8

  - by Wolvorin

  I installed windows 8's developer preview version dual boot with win 7 ultimate. I put my win 8's partition to 11 GB (almost), but now when I try to uninstall the win 8 it dont allow me to uninstall it saying no enough space. What to do ?? Then I try to login to win 7 and increase the size of the partition of win 8. This also is not possible. Please help me with it. I want to uninstall it but how and what to do?

  Read the article

• Python Daemon Subprocess not working at boot

  - by Adam Richardson

  I am attempting to write a python daemon that will launch at boot. The goal of the script is to receive a job from our gearman load balancing server and complete the job. I am using the python-daemon module from pypi (http://pypi.python.org/pypi/python-daemon/). The nature of the job that it is completing is converting images in the orf (olympus raw image format) to jpeg. In order to accomplish this an outside program is used, ufraw in this case. The problem comes in when I start the daemon at boot, if I launch from the shell it runs perfectly and completes the work. When it starts at boot it is unable to launch the subprocess command. commandString = '/usr/bin/ufraw-batch --interpolation=four-color --wb=camera --compression=100 --output="' + outfile + '" --out-type=jpg --overwrite "' + infile + '"' args = shlex.split(commandString) process = subprocess.Popen(args).wait() I am not sure what I am doing wrong. Thanks for any help.

  Read the article

• Ubuntu option vanishes after setting up windows XP(?) [closed]

  - by Ravi

  I have installed both windows XP as well as Ubuntu 9.04 on my machine.I can choose between them using dual boot option at the startup.Up to this, it is fine. But unfortunately when my XP crashes, I need to install XP again.But when I do it,after installing XP successfully, dual boot option no longer appears at the startup. So the Ubuntu goes in vein. What is the problem here? How do I solve it?

  Read the article

• installing windows on mac mini.

  - by sagar

  Please - please, don't start down voting after reading the question title. Hey ! Please first of read out the question. I brought a whole new mac mini as I am an iPhone developer - I prefer to use it. But most of my family members are not used to with mac osx. They don't know how to operate os x. Managing files Opening documents Browser & many many other issues. It's not their age to learn more, people like us ( computer geek ) can easily get into new systems. I had many attempted efforts to teach them for all these above topics in windows. Summary, Of all these, I know how to use mac, but they don't know. They stair like I am making private & bad usage of mac. In short, I just want to install windows. So, that they can feel that mac mini is for all members not for just me. Original Question Dual Boot windows & os x on mac mini ? Is it possible ? How ? Does it void warranties of apple ?

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• Fixing partitions and Installing BackTrack

  - by Josh

  My whole problem started when I started trying to install Backtrack(3 or 4) Backtrack was trying to install itself over my entire windows partition (Which I had combined into one when I installed windows 7). So I booted back into windows 7 on my netbook (eee pc 1000 HE btw) I went into disk-manager with the aim of making a partition to install backtrack on but came out with a really screwed up drive. So I had two partions when I started: the windows system partition, and then my main partition and they were blue in diskmanager (I think that has something to do with formatting). After I went through the steps to make a 10 GB FAT32 partition for backtrack I had about five partitons one called PE: that I have no Idea what it is the windows system file, my main partiton 10 GB unallocated space, and two other partions under 50MB each that are both unused space. And they were all converted to simple volumes (Green instead of blue). And backtrack still wants to erase my entire drive. Question number 1: How do I get it back to the way it was? Question 2: How to I get backtrack to dual boot on my netbook?

  Read the article

• W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

  - by Gary Kephart

  I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

  Read the article

• Vista gets stuck in an endless loop while booting

  - by Mason Wheeler

  I put my laptop to sleep last night, and when I woke up this morning... it didn't. So I tried to reboot, and everything went fine until it got to the Vista splash screen, where it's supposed to display the logon. Here, it hits an endless loop: Display the cursor with the blue spinny thing that replaced the hourglass, for 5-10 seconds Display "Please wait..." for about half a second Screen flashes to black, then quickly back to the Vista splash screen Goto step 1 The whole time, my hard LED is on almost non-stop. I can boot into Safe Mode... sometimes. Sometimes it'll load all the drivers, then sit there for about 10 minutes, spinning the hard drive non-stop, then reboot with no warning. I tried booting to Last Known Good Configuration. Didn't fix anything. When I've managed to get into Safe Mode, I tried running CHKDSK. Didn't fix anything. I tried running System Restore to each of my last two restore points. Didn't fix anything either time. I ran a virus scan. Didn't find anything. I tried calling the manufacturer (Alienware), only to discover that my warranty expired last freaking week and now I can't get it fixed without paying exorbitant sums of money. I'm about at my wits' end here. Has anyone seen this problem before? Does anyone know how to fix it? Does anyone know a solution that does not involve reinstalling the OS and losing an entire year's worth of program installations, Windows Updates and configuring and tweaking things until it's working just like I want it to?

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >