Search Results

Search found 18303 results on 733 pages for 'network analyzation'.

Page 112/733 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Problems bringing up a second virtual network interface

  - by tubaguy50035

  I'm having issues adding a second IP address to one interface. Below is my /etc/networking/interfaces # The loopback network interface auto lo iface lo inet loopback #eth0 is our main IP address auto eth0 iface eth0 inet static address 198.58.103.* netmask 255.255.255.0 gateway 198.58.103.1 #eth0:0 is our private address auto eth0:0 iface eth0:0 inet static address 192.168.129.134 netmask 255.255.128.0 #eth0:1 is for www.site.com auto eth0:1 iface eth0:1 inet static address 198.58.104.* netmask 255.255.255.0 gateway 198.58.104.1 When I run /etc/init.d/networking restart, I get a fail error about bringing up eth0:1: RTNETLINK answers: File exists Failed to bring up eth0:1. Any reason this would be? I didn't have any problems with I first set up eth0 and eth0:0.

  Read the article

• Connect to a particular network connection from terminal

  - by RanRag

  I am currently using Reliance netconnect USB modem. The problem I am facing is my USB modem disconnects itself at 22:00 PM IST everyday. Now, sometimes what I do is start some downloading and leave my laptop for 2-3 hours in this case if my network disconnects it is a problem for me. So, what I used to do in windows is make a python script and execute rasdial myconnection_name to automate the connection process in my absence. Now I want to achieve something similar in linux. So, what are my alternatives for rasdial like tool in linux to automatically connect to a particular connection . I am using ubuntu 12.04 and here is my nm-tool output.

  Read the article

• problem on expand network using a router

  - by Jose

  I have a Netgear FS605 v3 router, and i'm trying to expand my network. The router is connected to the cable modem with cat5 cable. I have 2 laptop connected to the router but i'm only able to get internet connectivity in one. The first laptop i turn on, get the signal and the other one will show no connectivity. I have restarted all the devices many times but no luck. Can somebody explain me how to get this solved. Thanks.

  Read the article

• Network Path not found while joining Active Directory

  - by Chiggins

  So I have an Amazon EC2 box running Windows Server 2008 with Active Directory installed on it. I also have a Windows 7 virtual machine, which is set to use the Active Directory box as its DNS and WINS server. I'm trying to join the virtual machine to the domain, and I'm asked for authentication. I give authentication, wait a minute, and I get an error saying: The following error occurred attempting to join the domain "ad.chigs.me": The network path was not found. How can I fix this so that I'll be able to join the domain? Thanks!

  Read the article

• Google SketchUp network licensing issue

  - by Larry G. Wapnitsky

  We have 10 licenses for Google SketchUp in my local office. We store the license file on a network drive that is accessible to all users. We've been finding that, at most, only 3 or 4 people can run it at one time before the license shows up as "expired" on another user's system. I've verified with Google that we have 10 licenses, and have downloaded updated license files from them. The only thing that I can think of is that sometimes SketchUp crashes. Could this be utilizing a license somehow without giving it up? Google has not been able to answer this question.

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Windows network: deny file access to another user if file is currently open

  - by Steve

  Some users on my network are having difficulties saving files, because the file is open elsewhere. Let's say Lemuel wants to edit a file, but Bernice in the next office over is working on it. Lemuel opens, edits, and tries to save, but then gets a "no write access" error. Bernice chortles with glee (since earlier that week Lemuel stole her sandwich). Unfortunately, various softwares will not warn the user that they have opened a read-only file. Is there a way (in Windows) to limit file access to ONE user only, i.e. 777 for the first user to open the file, and 000 for all users after that? (Sorry for the Linux terminology but it gets my point across).

  Read the article

• Can't see a Windows XP computer on the network

  - by user56614

  I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

  Read the article

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• Writing to network share failed

  - by Unreason

  I have outlook files stored on a network share and accessed by clients directly. Outlook is version 2003, clients windows XP and server is 2003. The files are quite big at around 3GB. One of the common problem that happens is that I get 'delayed write failed' and this happens only on these PST files. When this happens I have to run scanpst.exe to fix the PST file. I did not find any entries in even logs that I could relate to the issue. What would you suggest to change to fix the issue or where to look to further diagnose it? EDIT: No loss on ping and ping times within normal for LAN.

  Read the article

• Permission denied on network share

  - by Philipp

  i have a Windows 8 host system running a virtual(hyper-v) Debian6 client with an lamp environment. My development environment runs under Windows and I mapped the folder with my php files to a network drive so Apache has access to them.(mount.cifs //pc/share /var/share/) This far no problems - I see my app on windows in the browser. The problem is, I can't write stuff in php to the share folder - everytime i got a permission denied message in my error logs. For testing purpose i tried to change the directory permissions of /var/share with chmod -R 777 /var/share without success. Now Iam a little bit stumped.. has anyone an idea how to solve this?

  Read the article

• Windows Network copy and access denied randomly

  - by The King

  I have a windows 2008 R2 server and I now installed a new bigger HDD into it. I wanted to copy big AVI files to the new server hdd what is shared on the local network. I have write access to the servers hdd and I can successfully copy smaller files to it. But when I copy bigger files more than 500MB randomly on the copy I get Access Deny message. If I use RDP I can copy files through RDP client. I checked error messages at the server but I didn't found any error about this access deny. Because of RDP copy works I don't think that this could be hardware error. I think this is some kind of software setting error. Someone has faced this kind of error? Or somebody has idea what could cause or how to find the root of the problem?

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• Backup of "Leavers" network directory

  - by Mez

  I want to create a backup of a Leavers network home directory. I've generally done this before by just creating an iso with genisoimage and then burning it. However, it seems that the latest users have 10G in their files. For archival purposes, I want to be able to burn these to multiple DVDs. How do I create these DVD iso images (I know it's got something to do with tar and stream-media-size, and then how do I restore them if I need them again? Using Debian

  Read the article

• VMWare hypervisor with only 1 network card?

  - by Rafiq Maniar

  VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

  Read the article

• Computer freezes, wireless network icon disappears

  - by Heidi

  As you can see I have two problems. I have a Toshiba Tecra A3 computer. It is 5-6 years old and it is connected to a D-link router. For a period now it has not been working correctly. The computer freezes either when i try turning it on or when I have been using the computer for a short period of time. The times the computer works normally I have a problem with a disappearing wireless network icon, and so I have no internet. Can this be fixed or do I have to buy a new computer? I only use the computer for internet surfing and easy tasks like word etc, so I would like to keep it as long as possible.

  Read the article

• How to detect an iPhone connecting a network?

  - by JayCrossler

  I've noticed through watching Wireshark that when an iPhone connects to a wifi network, it sends out a few IGMP/MDNS packets to 224.0.0.251 (LAN broadcast, I think). Is there any easy way to watch for these packets and then either run a script or send an event? Or, is the best way to just run a packet sniffer? Any simple ones that can send events or execute curl commands when a filter is triggered? When I run nc -u -l 5353 I get: My-Name-iPhonelocal??? x???)?? ??cc^C Can I do something like: nc -u -l 5353 | grep iPhonelocal | execute command...

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• very Slow machine when searching the network

  - by Adam

  Hi We are using a Dell desktop machine with 2 GB RRAM & Pentium D 3.00 GHz. The machine is very slow when using our Sales program and searching over the local network. We have this problem on 2 machine which are the same spec - This one and another. All of our other machine (10) run fast with no issues. Our server is SBS 2008 and AV is AVG. All of our client machines are WinXp Pro SP3 using the latest drivers. Any ideas?

  Read the article

• "destination host unreachable" while ping attempt between 2 pc on 1 network

  - by Roberto Sadfasdf

  I have 2 computers in my network ones ip address is 192.168.2.31(PC-A) and the others is 192.168.2.33(PC-B). When I'm trying to ping from PC-B to PC-A it says: Pinging 192.168.2.33 with 32 bytes of data: Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Ping statistics for 192.168.2.33: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) And when i'm trying the otherwise it tells me same message with ip address switched..They are both can connect to the Internet

  Read the article

• Blacklist a single access point of a wireless network

  - by Zr40

  At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

  Read the article

• Multiple network cards, controlling where my traffic goes

  - by thefinn93

  This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• How to setup VPN on home network

  - by Tone

  I am a software developer. I travel and sometimes have a need to access my files at home and tweak other family members computers. I would like to connect to my home network via VPN and then RDP into whatever machine i need to. Currently i have a Windows Server 08 machine, which is my file server, database server, web server (for development work), source control repository, etc. (and also somewhat of a workstation when i need it to be). I want to use this same machine to run my VPN through. I have a linksys WRTG54 router. My ISP is AT&T DSL, with a dynamic IP address - so i'm assuming I'll either need to request a static IP or sign up with one of those static ip services.. where it keeps your dynamic ip synced up with a static one. While I do understand software engineering I am no expert in networking. What do i need to do to setup my VPN?

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >