Search Results

Search found 2964 results on 119 pages for 'php5 cgi'.

Page 112/119 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Tailing 'Jobs' with Perl under mod_perl

  - by Matthew

  Hi everyone, I've got this project running under mod_perl shows some information on a host. On this page is a text box with a dropdown that allows users to ping/nslookup/traceroute the host. The output is shown in the text box like a tail -f. It works great under CGI. When the user requests a ping it would make an AJAX call to the server, where it essentially starts the ping with the output going to a temp file. Then subsequent ajax calls would 'tail' the file so that the output was updated until the ping finished. Once the job finished, the temp file would be removed. However, under mod_perl no matter what I do I can's stop it from creating zombie processes. I've tried everything, double forking, using IPC::Run etc. In the end, system calls are not encouraged under mod_perl. So my question is, maybe there's a better way to do this? Is there a CPAN module available for creating command line jobs and tailing output that will work under mod_perl? I'm just looking for some suggestions. I know I could probably create some sort of 'job' daemon that I signal with details and get updates from. It would run the commands and keep track of their status etc. But is there a simpler way? Thanks in advance.

  Read the article

• Recursive Perl detail need help

  - by Catarrunas

  Hi everybody, i think this is a simple problem, but i'm stuck with it for some time now! I need a fresh pair of eyes on this. The thing is i have this code in perl: #!c:/Perl/bin/perl use CGI qw/param/; use URI::Escape; print "Content-type: text/html\n\n"; my $directory = param ('directory'); $directory = uri_unescape ($directory); my @contents; readDir($directory); foreach (@contents) { print "$_\n"; } #------------------------------------------------------------------------ sub readDir(){ my $dir = shift; opendir(DIR, $dir) or die $!; while (my $file = readdir(DIR)) { next if ($file =~ m/^\./); if(-d $dir.$file) { #print $dir.$file. " ----- DIR\n"; readDir($dir.$file); } push @contents, ($dir . $file); } closedir(DIR); } I've tried to make it recursive. I need to have all the files of all of the directories and subdirectories, with the full path, so that i can open the files in the future. But my output only returns the files in the current directory and the files in the first directory that it finds. If i have 3 folders inside the directory it only shows the first one. Ex. of cmd call: "perl readDir.pl directory=C:/PerlTest/" Thanks

  Read the article

• what webserver / mod / technique should I use to serve everything from memory?

  - by reinier

  I've lots of lookuptables from which I'll generate my webresponse. I think IIS with Asp.net enables me to keep static lookuptables in memory which I can use to serve up my responses very fast. Are there however also non .net solutions which can do the same? I've looked at fastcgi, but I think this starts X processes, of which anyone can handle Y requests. But the processes are by definition shielded from eachother. I could configure fastcgi to use just 1 process, but does this have scalability implications? anything using PHP or any other interpreted language won't fly because it is also cgi or fastcgi bound right? I understand memcache could be an option, though this would require another (local) socket connection which I'd rather avoid since everything in memory would be much faster. The solution can work under WIndows or Unix... it doesn't matter too much. The only thing which matters is that there will be a lot of requests (100/sec now and growing to 500/sec in a year), and I want to reduce the amount of webservers needed to process it. The current solution is done using PHP and memcache (and the occasional hit to the SQL server backend). Although it is fast (for php anyway), Apache has real problems when the 50/sec is passed. I've put a bounty on this question since I've not seen enough responses to make a wise choice. At the moment I'm considering either Asp.net or fastcgi with C(++).

  Read the article

• XSP2 crashes serving static images

  - by Dawkins

  Hi, Requesting a simple HTML page with a jpg image makes XSP2 crash. If I remove the image from the HTML then the page is served OK all the time. The version is XSP2 2.0 mono 2.6.1. the version 2.4.2.2 in the same machine works fine. I have tested it in two different machines, both Windows Vista Business SP1. Anyone has experienced the same? Any clue of what can be the problem? Below is the stack trace displayed by the console: (The line in Spanish says "it has been forced the interruption of an existing connection by the remote host") EDIT: since another user is having the same problem I have submited a bug to Novell and created a litle zip to reproduce the problem: https://bugzilla.novell.com/show_bug.cgi?id=582162 Peer unexpectedly closed the connection on write. Closing our end. System.IO.IOException: Write failure ---> System.Net.Sockets.SocketException: Se ha forzado la interrupción de una conexión existente por el host remoto. at System.Net.Sockets.Socket.Send (System.Byte[] buf, Int32 offset, Int32 size , SocketFlags flags) [0x00000] in <filename unknown>:0 at System.Net.Sockets.NetworkStream.Write (System.Byte[] buffer, Int32 offset, Int32 size) [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Write (System.Byte[] buffer, Int32 offset, Int32 size) [0x00000] in <filename unknown>:0 at Mono.WebServer.XSPWorker.Write (System.Byte[] buffer, Int32 position, Int32 size) [0x00000] in <filename unknown>:0 Peer unexpectedly closed the connection on write. Closing our end. System.ObjectDisposedException: The object was used after being disposed. at System.Net.Sockets.NetworkStream.CheckDisposed () [0x00000] in <filename un known>:0 at System.Net.Sockets.NetworkStream.Write (System.Byte[] buffer, Int32 offset, Int32 size) [0x00000] in <filename unknown>:0 at Mono.WebServer.XSPWorker.Write (System.Byte[] buffer, Int32 position, Int32 size) [0x00000] in <filename unknown>:0 Thank you.

  Read the article

• PayPal return URL

  - by Sam

  Here's the code for my Paypal button: <form action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="business" value="[email protected]"> <input type="hidden" name="lc" value="GB"> <input type="hidden" name="button_subtype" value="products"> <input type="hidden" name="no_note" value="1"> <input type="hidden" name="no_shipping" value="1"> <input type="hidden" name="rm" value="0"> <input type="hidden" name="return" value="http://www.example.com"> <input type="hidden" name="item_name" value="My Item"> <input type="hidden" name="amount" value="25.00"> <input type="hidden" name="currency_code" value="GBP"> <input type="hidden" name="bn" value="PP-BuyNowBF:proceed_btn.gif:NonHosted"> <input type="hidden" name="item_number" value="4BD9569402CDE"> <input type="image" src="http://www.example.com/image.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online."> <img alt="" border="0" src="https://www.paypal.com/en_GB/i/scr/pixel.gif" width="1" height="1"> </form> Is it possible to add the item_number to the return URL? For example, after completing the payment within PayPal the user gets sent back to http://www.example.com?item_number=4BD9569402CDE

  Read the article

• Form values in a list item

  - by Tri

  Here is the site mock-up I'm working on for my job: http://dev.arm.gov/~noensie/dqhands/cgi-bin/explorer. I'm still a novice in web developing and I need help with placing form values in a list item to pass on to another page. I'd rather not go in great detail the purpose of this website, but in terms of its basic use, select the parameters in the middle column for a request and add it to the list on the right column by pressing on "add request" button when it appears. After the list have been populated, a user would submit the selected requests, which will direct them to another page based on the requests selected (or added to the list, same thing). That last sentence is where I'm having a problem. Right now, each of request in the list in the right column are <li> elements and I assign them attribute values that needed to be passed on to the next page. I tried inserting a hidden input with same values, but I'm still not sure how to utilize that; I'm not even sure using the hidden input is the correct way. Also the "submit request" button is located outside the <form> block. I was going to utilize javascript and jQuery to enable the button to serialize the values in the <form> block, but I don't know quite how to do that. Go ahead and take a look at my javascript code (index.js) and slay me, or, I mean, my code. It's still pretty elementary and short (~260 lines, that's short right?). I will take any help for this problem (as the matter of fact, if you see any other problems or a better way of implementation of something, go ahead and mention that too); tips, advice, code samples, or whatever else you can contribute, it will be greatly appreciated. Tri

  Read the article

• "image contains error", trying to create and display images using google app engine

  - by bert

  Hello all the general idea is to create a galaxy-like map. I run into problems when I try to display a generated image. I used Python Image library to create the image and store it in the datastore. when i try to load the image i get no error on the log console and no image on the browser. when i copy/paste the image link (including datastore key) i get a black screen and the following message: The image “view-source:/localhost:8080/img?img_id=ag5kZXZ-c3BhY2VzaW0xMnINCxIHTWFpbk1hcBgeDA” cannot be displayed because it contains errors. the firefox error console: Error: Image corrupt or truncated: /localhost:8080/img?img_id=ag5kZXZ-c3BhY2VzaW0xMnINCxIHTWFpbk1hcBgeDA import cgi import datetime import urllib import webapp2 import jinja2 import os import math import sys from google.appengine.ext import db from google.appengine.api import users from PIL import Image #SNIP #class to define the map entity class MainMap(db.Model): defaultmap = db.BlobProperty(default=None) #SNIP class Generator(webapp2.RequestHandler): def post(self): #SNIP test = Image.new("RGBA",(100, 100)) dMap=MainMap() dMap.defaultmap = db.Blob(str(test)) dMap.put() #SNIP result = db.GqlQuery("SELECT * FROM MainMap LIMIT 1").fetch(1) if result: print"item found<br>" #debug info if result[0].defaultmap: print"defaultmap found<br>" #debug info string = "<div><img src='/img?img_id=" + str(result[0].key()) + "' width='100' height='100'></img>" print string else: print"nothing found<br>" else: self.redirect('/?=error') self.redirect('/') class Image_load(webapp2.RequestHandler): def get(self): self.response.out.write("started Image load") defaultmap = db.get(self.request.get("img_id")) if defaultmap.defaultmap: try: self.response.headers['Content-Type'] = "image/png" self.response.out.write(defaultmap.defaultmap) self.response.out.write("Image found") except: print "Unexpected error:", sys.exc_info()[0] else: self.response.out.write("No image") #SNIP app = webapp2.WSGIApplication([('/', MainPage), ('/generator', Generator), ('/img', Image_load)], debug=True) the browser shows the "item found" and "defaultmap found" strings and a broken imagelink the exception handling does not catch any errors Thanks for your help Regards Bert

  Read the article

• Suggestions for entering mobile development -- pure iPhone SDK, Andorid SDK. Mono Touch or Titanium?

  - by Tom Cabanski

  I am entering mobile development. I have been working primarily in .NET since 1.0 came out in beta. Before that, I was mostly a C++ and Delphi guy and still dabble in C++ from time to time. I do web apps quite a bit so I am reasonably proficient with Javascript, JQuery and CSS. I have also done a few Java applications. I started web programming with CGI and live mostly in the ASP.NET MVC world these days. I am trying to decide on which platform/OS and tool to select. I am concerned with the size of the market available for my applications as well as the marketibility of the skills I will pick up. The apps I have in mind would work on both phones and pads. Some aspects of what I have in mind will play better on the bigger screens that will be available on pads. Here are the options I am considering: Apple iPhone/iPad using pure Apple SDK (Objective-C) Apple iPhone/iPad using Mono Touch (C#) Android using pure Android SDK (Java) Multiple platforms using something like Titanium to generate native apps from web technologies (HTML, CSS and Javascript) Multiple platforms using HTML5 web applications that run in the browser (HTML, CSS and Javascript). Which option would you choose? Do you have a different suggestion? What are the pros and cons?

  Read the article

• Connecting to MS SQL Server 2005 via Web Service

  - by clear-cycle-corp

  Delphi 2010, dbExpress, and MS SQL Server 2005 DB Ok, I am trying to make a connection to a MS SQL 2005 DB using Delphi 2010 & DBExpress. If I create a standard delphi application and hard code my connection (IT WORKS!): procedure TForm1.Button1Click(Sender: TObject); var Conn: TSQLConnection; begin Conn:= TSQLConnection.Create(nil); Conn.ConnectionName:= 'VPUCDS_VPN_SE01'; Conn.LoadParamsOnConnect := True; Conn.LoginPrompt:=True; try Conn.Connected:= True; if Conn.Connected then ShowMessage('Connected!') else ShowMessage('NOT Connected!') finally Conn.Free; end; end; All the ini files, and DLLs reside in the same folder as my executable and yes, I have DBXMsSQL & MidasLib in the uses clause again, it works if its not a web service! However, if i then move the code over to a Web serices CGI module: function TTest.ConnectToDB: Boolean;stdcall; var Conn: TSQLConnection; begin Conn:= TSQLConnection.Create(nil); Conn.ConnectionName:= 'VPUCDS_VPN_SE01'; Conn.LoadParamsOnConnect := True; Conn.LoginPrompt:=True; try Conn.Connected:= True; result:= Conn.Connected; finally Conn.Free; end; end; Thanks

  Read the article

• localhost not going to desired VirtualHost

  - by ladaghini

  I have several VirtalHosts set up on my computer. I'd like to visit the site I'm currently working on from a different PC using the my comp's ip address, but every config i've tried keeps taking me to a different virtual host (in fact the first virtualhost I set up on my comp). How do I set up the apache virtualhost configs to ensure that the ip address takes me to the site I want it to. /etc/apache2/sites-available/site-i-want-to-show-up-with-ip-address.conf contains: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerAlias currentsite.com DocumentRoot /path/to/root/of/site-i-want-to-show-up ServerName localhost ScriptAlias /awstats/ /usr/lib/cgi-bin/ CustomLog /var/log/apache2/current-site-access.log combined </VirtualHost> And /etc/apache2/sites-available/site-that-keeps-showing-up.conf contains: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerAlias theothersite.com DocumentRoot /path/to/it <Directory /> Options FollowSymLinks AllowOverride None </Directory> </VirtualHost> I'd appreciate anyone's help. Also, I don't know too much about configuring web servers, and I used tutorials to get the above code.

  Read the article

• paypal verify payment

  - by yozhik

  I am testing PayPal payments through Sandbox. So what do I do: Make a payment from my Android device, using SDK AppID: "APP-80W284485P519543T". Receive RESULT_OK in applicationResult and receive response on server side through IPN service. Now I am taking all responce from IPN and send it to paypal verification sandbox server to verify payment. It cat return (VERIFIED or INVALID). But the problem is that it is return INVALID. So whats can be the problem? What I am doing wrong? Thanks. This is what I send to verify: https://www.sandbox.paypal.com/cgi-bin/webscr?cmd=_notify-validate&payment_request_date=Mon+Mar+26+02%3A37%3A10+PDT+2012&fees_payer=EACHRECEIVER&transaction[0].is_primary_receiver=false&memo=Buy+1500+coins&transaction_type=Adaptive+Payment+PAY&verify_sign=AWimjEpfvS2eR6IgBwHtiwM0rMDUA.b2twU2ADjkAY-kg5szeluxcqKb&log_default_shipping_address_in_transaction=false&pay_key=AP-2YR77828AV574621G&transaction[0].amount=USD+1.99&reverse_all_parallel_payments_on_error=true&ipn_notification_url=http%3A%2F%2Fdev-vs.upiter.com%2Fvspayment%2Fproviders%2Fvs%2Ffb%2Fpaypalcallback&action_type=CREATE&notify_version=UNVERSIONED&transaction[0].status_for_sender_txn=Pending&test_ipn=1&cancel_url=https%3A%2F%2Fwww.paypal.com&transaction[0].pending_reason=UNILATERAL&status=COMPLETED&charset=windows-1252&transaction[0].paymentType=GOODS&request_body=&request_url=http%3A%2F%2Fdev-vs-mobile.stagika.com%2Fvspayment%2Fproviders%2Fvs%2Ffb%2Fpaypalcallback&return_url=https%3A%2F%2Fwww.paypal.com&transaction[0].receiver=a.merchant1.kv%40gmail.com&request_method=POST&transaction[0].id_for_sender_txn=0X355330VH030952T&sender.useCredentials=true

  Read the article

• using paypals html api is safe?

  - by ajsie

  im trying out paypals html api where you specify price, item_name, customer information and so on in the html: <form action="https://www.paypal.com/cgi-bin/webscr" method="post" id="payPalForm"> <input type="hidden" name="cmd" value="_cart" /> <input type="hidden" name="upload" value="1" /> <input type="hidden" name="no_note" value="1" /> <input type="hidden" name="business" value="[email protected]" /> <input type="hidden" name="currency_code" value="SEK" /> <input type="hidden" name="return" value="http://freelanceswitch.com/payment-complete/" /> <input type="hidden" name="tax_rate" value="25" /> <input type="hidden" name="item_name_1" value="Apple Macpro" /> <input type="hidden" name="item_number_1" value="01 - Product 1" /> <input type="hidden" name="amount_1" value="25000" /> <input type="hidden" name="item_name_2" value="Apple Macbook" /> <input type="hidden" name="item_number_2" value="02 - Product 2" /> <input type="hidden" name="amount_2" value="12500" /> <input type="hidden" name="item_name_3" value="Apple Macbook Air" /> <input type="hidden" name="item_number_3" value="03 - Product 3" /> <input type="hidden" name="amount_3" value="12500" /> <input type="submit" name="Submit" value="Submit" /> </form> when the user clicks submit it takes him/her to paypals payment page. but doesn't this mean that a hacker could change the order by manipulating the html code? i can´t figure out how paypal prevents this security problem.

  Read the article

• How Can I: Generate 40/64 Bit WEP Key In Python?

  - by Aktariel

  So, I've been beating my head against the wall of this issue for several months now, partly because it's a side interest and partly because I suck at programming. I've searched and researched all across the web, but have not had any luck (except one small bit of success; see below), so I thought I might try asking the experts. What I am trying to do is, as the title suggests, generate a 40/64 bit WEP key from a passphrase, according to the "de facto" standard. (A site such as [http://www.powerdog.com/wepkey.cgi] produces the expected outputs.) I have already written portions of the script that take inputs and write them to a file; one of the inputs would be the passphrase, sanitized to lower case. For the longest time I had no idea what the defacto standard was, much less how to even go about implementing it. I finally stumbled across a paper (http://www.lava.net/~newsham/wlan/WEP_password_cracker.pdf) that sheds as much light as I've had yet on the issue (page 18 has the relevant bits). Apparently, the passphrase is "mapped to a 32-bit value with XOR," the result of which is then used as the seed for a "linear congruential PRNG (which one of the several PRNGs Python has would fit this description, I don't know), and then from that result several bits of the result are taken. I have no idea how to go about implementing this, since the description is rather vague. What I need is help in writing the generator in Python, and also in understanding how exactly the key is generated. I'm not much of a programmer, so explanations are appreciated as well. (Yes, I know that WEP isn't secure.)

  Read the article

• How to persist objects between requests in PHP

  - by SztupY

  I've been using rails, merb, django and asp.net mvc applications in the past. What they have common (that is relevant to the question) is that they have code that sets up the framework. This usually means creating objects and state that is persisted until the web server is recycled (like setting up routing, or checking which controllers are available, etc). As far as I know PHP is more like a CGI script that gets compiled to some bytecode each time it's run, and after the request it's discarded. Of course you can have sessions, to persist data between requests from the same user, and as I see there are extensions like APC, with which you can persist objects between requests at the server level. My question is: how can one create a PHP application that works like rails and such? I mean an application that on the first requests sets up the framework, then on the 2nd and later requests use the objects that are already set up. Is there some built in caching facility in mod_php? (for example that stores the compiled bytecode of the executed php applications) Or is using APC or some similar extensions the only way to solve this problem? How would you do it? Thanks.

  Read the article

• How to test a struts 2.1.x developer?

  - by Jason Pyeron

  We employ test to filter out those who can't. The tests are designed to be very low effort for those who can and too much effort for those who can't. Here is an example for java web application developer on an Oracle project: We only work with contractors who can use the tools we use, to determine if you can use the tools we have devised some very simple tests. Instructions If you are prepared and knowledgeable this will take you about 2-5 minutes. Suggested knowledge and tools: * subversion 1.6 see http://subversion.tigris.org/ or http://cygwin.com/setup.exe * java 1.6 see http://java.sun.com/javase/downloads/index.jsp * oracle >=10g see http://www.oracle.com/technology/software/products/jdev/index.html * j2ee server see http://tomcat.apache.org/download-55.cgi or http://www.jboss.org/jbossas/downloads/ Steps 1. check out svn://statics32.pdinc.us/home/subversion/guest 2. deploy the war file found at trunk/test.war 3. browse to the web application you installed from the war file and answer the one SQL question: How many rows are in the table 'testdata' where column 'value' ends with either an 'A' or an 'a'? The login credentials are in trunk/doc/oracle.txt 4. make a RESULTS HASH by submitting your answer to the form. 5. create a file in tmp/YourUserName.txt and put the RESULTS HASH in it, not the answer. 6. check in your file (don't forget to add the file first). 7. message me with the revision number of your check in. As such I am looking for ideas on how to test for someone to be a struts 2.1 w/ annotations.

  Read the article

• PayPal integration woes: PDT hangs on return to site

  - by Tom

  Hi, I'm implementing PayPal IPN & PDT. After some headache & time at the sandbox, IPN is working well and PDT returns the correct $_GET data. The implementation is as follows: Pass user ID in form to PayPal User buys product and triggers IPN which updates database for given user ID PDT returns transaction ID when user returns to site The return page says "please wait" and repeat-Ajax-checks for the transaction status User is redirected to success/failure page Everything works well, EXCEPT that when using the PayPal ready PHP code for PDT to do a return POST, the page hangs. PayPal waits for a response and the user never gets back to my site. I'm not getting a fail status, just nothing. The funny thing is that once the unknown error occurs, my test domain becomes unresponsive for a short period. The code (PHP): https://www.paypal.com/us/cgi-bin/webscr?cmd=p/xcl/rec/pdt-code-outside If I comment out the POST back, it all works fine. I'm able to pin down the problem to once the code enters the while{} loop. Unfortunately, I'm not experienced enough to write a replacement from scratch for the PayPal code, so would really appreciate any ideas on what might be wrong. The POST back goes to ssl://www.sandbox.paypal.com, and I'm using button code and an authorisation token that have all been created via a sandbox test account. Thanks in advance.

  Read the article

• Why Illegal cookies are send by Browser and received by web servers (rfc 2109, 2965)?

  - by Artyom

  Hello, According to RFC 2109, 2965 cookie's value can be either HTTP token or quoted string, and token can't include non-ASCII characters. Cookie's RFC 2109 and RFC2965 HTTP's RFC 2068 token definition: http://tools.ietf.org/html/rfc2068#page-16 However I had found that Firefox browser (3.0.6) sends cookies with utf-8 string as-is and three web servers I tested (apache2, lighttpd, nginx) pass this string as-is to the application. For example, raw request from browser: $ nc -l -p 8080 GET /hello HTTP/1.1 Host: localhost:8080 User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.9) Gecko/2009050519 Firefox/2.0.0.13 (Debian-3.0.6-1) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: windows-1255,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: wikipp=1234; wikipp_username=?????? Cache-Control: max-age=0 And raw response of apache, nginx and lighttpd HTTP_COOKIE CGI variable: wikipp=1234; wikipp_username=?????? What do I miss? Can somebody explain me?

  Read the article

• PayPal IPN "FAIL"

  - by Rob

  Hey all... I'm trying to figure out how to use PayPal's IPN and I've run into a wall. I want a buyer to be forwarded to a success page after making a purchase, and I want that page to show the details of their transaction. I choose IPN instead of the PDT because I also want to do some other behind the scenes stuff with their data. Anyway, here's the code I'm using -- I'm testing in sandbox mode -- but it returns "FAIL" every time. $req = 'cmd=_notify-validate'; foreach ($_POST as $key => $value) { $value = urlencode(stripslashes($value)); $req .= "&$key=$value"; } // post back to PayPal system to validate $header = "POST /cgi-bin/webscr HTTP/1.0\r\n"; $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; $header .= "Content-Length: " . strlen($req) . "\r\n\r\n"; $fp = fsockopen ('www.sandbox.paypal.com', 80, $errno, $errstr, 30); if (!$fp) { // HTTP ERROR } else { fputs ($fp, $header . $req); while (!feof($fp)) { $res = fgets ($fp, 1024); if (strcmp ($res, "VERIFIED") == 0) { // PAYMENT VALIDATED & VERIFIED! echo "Validated!"; } else if (strcmp ($res, "INVALID") == 0) { // PAYMENT INVALID & INVESTIGATE MANUALY! echo "Invalid!"; } } fclose ($fp); }

  Read the article

• Email Tracking - GMail

  - by Abs

  Hello all, I am creating my own email tracking system for email marketing tracking. I have been able to determine each persons email client they are using by using the http referrer but for some reason GMAIL does not send a HTTP_REFERRER at all! So I am trying to find another way of identifying when gmail requests a transparent image from my server. I get the following headers print_r($_SERVER);: DOCUMENT_ROOT = /usr/local/apache/htdocs GATEWAY_INTERFACE = CGI/1.1 HTTP_ACCEPT = */* HTTP_ACCEPT_CHARSET = ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP_ACCEPT_ENCODING = gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE = en-GB,en-US;q=0.8,en;q=0.6 HTTP_CONNECTION = keep-alive HTTP_COOKIE = __utmz=156230011.1290976484.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); __utma=156230011.422791272.1290976484.1293034866.1293050468.7 HTTP_HOST = xx.xxx.xx.xxx HTTP_USER_AGENT = Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.10 (KHTML, like Gecko) Chrome/8.0.552.237 Safari/534.10 PATH = /bin:/usr/bin QUERY_STRING = i=MTA= REDIRECT_STATUS = 200 REMOTE_ADDR = xx.xxx.xx.xxx REMOTE_PORT = 61296 REQUEST_METHOD = GET Is there anything of use in that list? Or is there something else I can do to actually get the http referrer, if not how are other ESPs managing to find whether gmail was used to view an email? Btw, I appreciate it if we can hold back on whether this is ethical or not as many ESPs do this already, I just don't want to pay for their service and I want to do it internally. Thanks all for any implementation advice. Update Just thought I would update this question and make it clearer in light of the bounty. I would like to find out when a user opens my email when sent to a GMail inbox. Assume, I have the usual transparent image tracking and the user does not block images. I would like to do this with the single request and the header details I get when the transparent image is requested.

  Read the article

• How to Avoid PHP Object Nesting/Creation Limit?

  - by Will Shaver

  I've got a handmade ORM in PHP that seems to be bumping up against an object limit and causing php to crash. Here's a simple script that will cause crashes: <? class Bob { protected $parent; public function Bob($parent) { $this->parent = $parent; } public function __toString() { if($this->parent) return (string) "x " . $this->parent; return "top"; } } $bobs = array(); for($i = 1; $i < 40000; $i++) { $bobs[] = new Bob($bobs[$1 -1]); } ?> Even running this from the command line will cause issues. Some boxes take more than 40,000 objects. I've tried it on Linux/Appache (fail) but my app runs on IIS/FastCGI. On FastCGI this causes the famous "The FastCGI process exited unexpectedly" error. Obviously 20k objects is a bit high, but it crashes with far fewer objects if they have data and nested complexity. Fast CGI isn't the issue - I've tried running it from the command line. I've tried setting the memory to something really high - 6,000MB and to something really low - 24MB. If I set it low enough I'll get the "allocated memory size xxx bytes exhausted" error. I'm thinking that it has to do with the number of functions that are called - some kind of nesting prevention. I didn't think that my ORM's nesting was that complicated but perhaps it is. I've got some pretty clear cases where if I load just ONE more object it dies, but loads in under 3 seconds if it works.

  Read the article

• Paypal Encrypted Website payments

  - by John Isaacks

  I am trying to integrate a PayPal Website Payments Standard Cart Upload payment type into my shopping cart. I integrated Google Checkout a while back and I did not find it overly confusing as I do paypal. I am getting info on how to encrypt it from here: https://cms.paypal.com/us/cgi-bin/?&cmd=_render-content&content_ID=developer/e_howto_html_encryptedwebpayments#id08A3I0P017Q Paypal says I need to generate a private key and a public certificate using OpenSSL. I went to OpenSSL and downloaded the latest release, which is just a folder containing various files but I see no application I can use, not sure what to do here. Even if I were to get OpenSSL to generate me a private key and public cert, the next step is to download either an MS or Java command line tool to create the encrypted cart ahead of time with the cart-total, tax, etc. which sounds crazy to me, like I am supposed to manually do this prior to every order?? Obviously I do not know the items in the cart the customer is going to buy before hand so I need this to be done on the fly on my website using PHP. But I am completely lost. There has to be a way to setup dynamic secure cart uploads to paypal. Can someone please point me in the right direction?

  Read the article

• how to hide ssh expect user/password

  - by raindrop18

  my perl cgi script I have the password/user on clear text and want to hide it or the user enter the credential interactively.is that possible? here is my code. please any help!! i am very new for perl. #!/usr/local/bin/expect ####################################################################################################### # Input: It will handle two arguments -> a device and a show command. ####################################################################################################### # ######### Start of Script ###################### # #### Set up Timeouts - Debugging Variables log_user 0 set timeout 10 set userid "USER" set password "PASS" # ############## Get two arguments - (1) Device (2) Command to be executed set device [lindex $argv 0] set command [lindex $argv 1] spawn /usr/local/bin/ssh -l $userid $device match_max [expr 32 * 1024] expect { -re "RSA key fingerprint" {send "yes\r"} timeout {puts "Host is known"} } expect { -re "username: " {send "$userid\r"} -re "(P|p)assword: " {send "$password\r"} -re "Warning:" {send "$password\r"} -re "Connection refused" {puts "Host error -> $expect_out(buffer)";exit} -re "Connection closed" {puts "Host error -> $expect_out(buffer)";exit} -re "no address.*" {puts "Host error -> $expect_out(buffer)";exit} timeout {puts "Timeout error. Is device down or unreachable?? ssh_expect";exit} } expect { -re "\[#>]$" {send "term len 0\r"} timeout {puts "Error reading prompt -> $expect_out(buffer)";exit} } expect { -re "\[#>]$" {send "$command\r"} timeout {puts "Error reading prompt -> $expect_out(buffer)";exit} } expect -re "\[#>]$" set output $expect_out(buffer) send "exit\r" puts "$output\r\n"

  Read the article

• Eclipse Java Content Assist not working

  - by Damo

  The Content Assist in Eclipse 3.4 and 3.5 has stopped working for me. When I type in the first few characters of a class and hit CRTL-space then after a delay I get the following error message It does not matter what proposals I enable/disable, I will get this (or similar) message. I have tried: Changing the Xms/Xmx values Starting Eclipse with -clean Creating a new workspace and importing my projects However none of these have worked. I have seen some posts suggesting that other apps may be taking over the CRTL-space or otherwise interfering, however I have nothing aside from a fresh Eclipse running and the problem persists. My problem is very similar to the one covered in this post albeit on a later version and on OSX 10.5.7. Does anyone have any suggestions for how this might be resolved? Thanks. UPDATE: To anyone interested I've had the best results by using Eclipse 3.5 Classic (ie. doesn't include Mylyn). I've also used the settings specified in the bug reports linked to by VonC below. Interestingly Classic doesn't come with some views eg. Snippets, but these are easy to drop in from another distro. UPDATE 2: This problem actually persisted even with the latest versions of Eclipse (3.6 M1). It is caused by a large JAR file generated my Altova Mapforce to handle EDIFACT transformations in our application. It is reproducible by adding this JAR to the buildpath and no changes to Content Assist settings help. The bug (and JAR) can be seen at https://bugs.eclipse.org/bugs/show_bug.cgi?id=289057

  Read the article

• set a cookie while sending PERL HTTP::Request

  - by dexter

  i have created HTTP::Request which looks like this: #!/usr/bin/perl require HTTP::Request; require LWP::UserAgent; $request = HTTP::Request->new(GET => 'http://www.google.com/'); $ua = LWP::UserAgent->new; $ua->cookie_jar({file => "testcookies.txt",autosave =>1}); $response = $ua->request($request); if($response->is_success){ print "sucess\n"; print $response->code; } else { print "fail\n"; die $response->code; } now, When i send Request: $request = HTTP::Request->new(GET => 'http://www.google.com/'); $ua = LWP::UserAgent->new; $ua->cookie_jar({file => "testcookies.txt",autosave =>1}); i want to set a cookie which might look like.. $request = HTTP::Request->new(GET => 'http://www.google.com/'); $ua = LWP::UserAgent->new; $ua->new CGI::Cookie(-name=>"testCookie",-value=>"cookieValue"); $ua->cookie_jar({file => "testcookies.txt"}); gives error though. AND, want to log the http response codes in the file please help thank you

  Read the article

• Why Illegal cookies are send by Browser and received by web servers (rfc2109)?

  - by Artyom

  Hello, According to RFC 2109 cookie's value can be either HTTP token or quoted string, and token can't include non-ASCII characters. Cookie's RFC 2109: http://tools.ietf.org/html/rfc2109#page-3 HTTP's RFC 2068 token definition: http://tools.ietf.org/html/rfc2068#page-16 However I had found that Firefox browser (3.0.6) sends cookies with utf-8 string as-is and three web servers I tested (apache2, lighttpd, nginx) pass this string as-is to the application. For example, raw request from browser: $ nc -l -p 8080 GET /hello HTTP/1.1 Host: localhost:8080 User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.9) Gecko/2009050519 Firefox/2.0.0.13 (Debian-3.0.6-1) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: windows-1255,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: wikipp=1234; wikipp_username=?????? Cache-Control: max-age=0 And raw response of apache, nginx and lighttpd HTTP_COOKIE CGI variable: wikipp=1234; wikipp_username=?????? What do I miss? Can somebody explain me?

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >