Search Results

Search found 5793 results on 232 pages for 'requests'.

Page 112/232 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

  • Force local IP traffic to an external interface

    - by calandoa
    I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

    Read the article

  • How to remove IIS/ASP.NET Response Headers

    - by Redbeard 0x0A
    I have a couple IIS/6.0 servers that security is asking me to remove a couple of response headers that are sent to client browsers on requests. They are concerned about divulging platform information through response headers. I have removed all the HTTP-HEADERS out of the IIS configuration for the website (X-Powered-By or some such header). (I personally do know that this information can be easily found out, even if it is hidden, but it isn't my call.) Headers I want to remove: Server - Microsoft-IIS/6.0 X-AspNet-Version - 2.0.50727 I also know that ASP.NET MVC also emits its own header too, if you know how to remove it also, that would be helpful. X-AspNetMvc-Version - 1.0

    Read the article

  • Configure Windows Routes for VPN

    - by Florin Sabau
    I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

    Read the article

  • Allow Single IP to access ASP.NET Web Service (ASMX) using Firewall

    - by Suresh Agrawal
    I have one asp.net web service (asmx) in separate project that is hosted on windows server having other asp.net web applications running on it. How can I restrict asp.net web service to be accessed by single IP address? I want that my web service must be accessed by one IP configured by me. If requests comes from any other IP, it must not reach to my web service and discarded by windows firewall itself. I know that this is something to do with windows firewall. I did it for SQL Server previously, but I don't know how to configure single asp.net web service project to do so.

    Read the article

  • clam anti-virus is slowing down my server performance

    - by Scarface
    Hey guys, I just installed clam av http://sourceforge.net/projects/php-clamav/ for scanning file uploads on my linux VPN running php. The problem is that for some reason just initiating the extension in the php ini file slows down my entire network. Regular requests such as changing pages that should take less than 1 second take 5. Has anyone ever experienced this before or have a good virus scanning alternative for scanning file uploads? extension=clamav.so [clamav] clamav.dbpath="/usr/share/clamav" clamav.keeptmp=20 clamav.maxreclevel=16 clamav.maxfiles=10000 clamav.maxfilesize=26214400 clamav.maxscansize=104857600 clamav.keeptmp=0

    Read the article

  • How to configure cookieless virtual host in Apache2?

    - by xzyfer
    We run over a hundred web applications (growing daily) on a LAMP stack using Apache2 on Ubuntu 10.04. We've would like all requests to static content to be cookieless. We host applications on many different domains, a majority of which as SaSS applications. Many of the domains host instances of the applications on sub domains, ie. myapp.example.com, myapp2.example.com myapp.otherexample.com etc.. At the moment all static content is server relative to the (sub)domain requesting it. As far as I understand the process, I would need to setup a new domain, eg. staticexample.com. In this case is special configuration in the virtual host for this domain required to ensure no cookies are served? Also, would it be possible to instead use static.example.com? In this case what configurations would I need in my virtual host for this subdomain to ensure no cookies are served?

    Read the article

  • W2k8 RC1: Windows Media Servers (WMS) as proxy

    - by da_didi
    (fullquote from stackoverflow.com/questions/2690788/w2k8-rc1-windows-media-servers-wms-as-proxy/2690791#2690791) I will have one streaming-server (W2k8, unknown streaming protocol [rtsp, mss, http]) and half dozen streaming-servers as proxies to save bandwidth. I have read the documentation and installed the modules, but I am unsure how I have to configure the proxy's according to http://technet.microsoft.com/de-de/library/ee126142(en-us,WS.10).aspx - as a proxy or reverse proxy and how I minimize the bandwidth needs between origin server and proxy's. What is the best way to realize my setup? Any short how-tos? How can I announce all players to use the proxy? Route all rtsp/mms/http-requests through my proxy? Announce the proxy with DHCP-releases? Thanks!

    Read the article

  • signing the web server certificate with the CA key

    - by user1064786
    I have problem in running the command below using openssl-0.9.8e and apache in Ubuntu 11.10. do you have any idea to resolve it? first i was receiving this error: No such file or directory:bss_file.c:169:fopen('openssl.cnf','rb') then i copied my modified openssl.cnf file in the /etc/ssl/ directory. now i receive an error regarding -in option: openssl ca -days 3650 –in server/requests/ciise.concordia.ca.csr –cert ./CA/ConcordiaCA.crt –keyfile ./CA/ConcordiaCA.key –out ./server/certificates/ciise.concordia.ca.crt -config openssl.cnf unknown option –in I also copied ciise.concordia.ca.csr in the upper directory, but the problem still persists I would appreciate any help:)

    Read the article

  • How to use iptables to foward outbound web traffic to a proxy?

    - by jnman
    I've been hitting my head for a while as to how to do this. The scenario is as follows: I want to be able to forward all outbound web traffic from a browswer to Tor so that it is properly anonymized. Normally, one could just set the http proxy in the browser and be done with it but this is with a browser without the ability to do so specifically, a mobile browser. So ideally, what could be done then is to intercept all web/dns traffic requests from the browser and send it to Tor. Assume for this, that Tor will be running on the device too.

    Read the article

  • IIS6 Front Page Extension: Set Reply-To in Webbot mailers

    - by hurikhan77
    We are running some old legacy IIS6 websites with frontpage extensions. The contact forms (using webbot frontpage extension) use the administrators email address as from address which is pretty cumbersome as our customers tend to click just reply in the requests they receive and we always get these mails and have to bother about them. How do you set a reply-to per webbot form? Or how do you set a from or reply-to globally per IIS6 vhost? In the HTML code it looks like this: <!--webbot bot="SaveResults" S-Email-Format="TEXT/PRE" S-Email-Address="[email protected]" ... --> But this is the recipient address. Additional question: Will it be sufficient to just change this code? Or do I need to apply settings elsewhere?

    Read the article

  • remote desktop over wireless

    - by tbischel
    So I'm trying to run remote desktop on my laptop to connect to my home desktop. I have a problem where this works fine if I connect my laptop with an ethernet cable, but fails when I try to use wireless internet access (which works fine for normal internet surfing). I've experienced this problem at home with my wireless router, and at work with the wireless network they have there, so I'm inclined to believe that its a setting local to my machine rather than the router blocking the requests... but I'm not sure where to look. Any suggestions?

    Read the article

  • Torrent, ISA Server 2006 and packet dropped due to TCP_NOT_SYNC

    - by Pascal
    Hi, I'm trying to get uTorrent 2.0.4 to work in a DMZ machine, protected by a ISA Server 2006. I've opened 1 inbound port (via publishing) and opened all the higher ports for that specific machine that runs uTorrent on my DMZ, and it's working almost fine. The problem is that I keep getting packets dropped with 0xc0040017 FWX_E_TCP_NOT_SYN_PACKET_DROPPED. Is there any way to disable this via registry? Is there any way around this? The download speed fluctuates a lot, and when I starts hitting the upper limit that I've defined in uTorrent, the errors start poping up a lot, and the download speed goes way down, and the process repeats on and on Tks Edit My outbound rules are: Port Range: TCP 10000-65535 Outbound Port Range: UDP 10000-65535 Send Edit It's probably a bug handling requests from Windows 7. When I installed the uTorrent on a XP machine, the problem went away

    Read the article

  • How do I delete a route in OS X 10.5

    - by authormichael-olsen-craig
    I somehow configured my Mac to route all requests for a particular IP Name (sample.com) to the loopback address (127.0.0.1). Now I'm trying to remove this, but can't determine where to do it. There is no entry for it under /etc/hosts. The routing table shows that it is mapping the IP Name to the IP address of the Mac. Routing table output below: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.2.1 UGSc 4 1 en0 127 sample.com UCS 0 0 lo0 sample.com sample.com UH 1 7093 lo0 169.254 link#4 UCS 0 0 en0 192.168.2 link#4 UCS 6 0 en0 192.168.2.1 0:11:22:22:3f:fa UHLW 20 55565 en0 1070 192.168.2.15 tsema.org UHS 0 9 lo0 192.168.2.255 link#4 UHLWb 4 84777 en0 Any help would be greatly appreciated!

    Read the article

  • IIS: redirect to a webpage if authentication fails

    - by DrStalker
    We have an IIS site (MOSS 2007) that uses Windows Authentication. When a user that has forgotten their password tries to login the servers keeps sending 401 requests. This means on IE the user gets three prompts before IE displays a blank page, on Firefox the user is prompted over and over until they give up. We would like to change the behavior so if a user fails to login three times in a row we send them a redirect to a different site, instead of another 401 Forms authentication is not an option; the site has to remain on windows authentication to allow for SSO capabilities and certain sharepoint functions. Is there any way to tweak the IIS behavior to do this?

    Read the article

  • apache generating to many rotatelogs.exe on Windows?

    - by Patrick
    I'm seeing some odd behavior with Apache's rotatelogs.exe. On one of my servers I'm seeing multiple rotatelogs.exe counting into the 100's. Normally I usually only see 6 which I can rationalize to the 3 logs I have rotating. Does anyone know why this might be happening and how I can prevent it from happening. When the rotatelogs.exe processes get up into the 100's everything slows down and Apache is effectively shutdown because it can't process requests anymore. We are using the following line in our httpd.conf file: ErrorLog "|\"C:/Program Files/Apache2/bin/rotatelogs.exe\" \"C:/Program Files/Apache2/logs/error_log.%Y-%m-%d-%H_%M_%S\" 20M" Thanks in advance for the help!

    Read the article

  • Clean URLS on Hiawatha

    - by Botto
    I am using the Hiawatha web server and running drupal on a FastCGI PHP server. The drupal site is using imagecache and it requires either private files or clean urls. The issue I am having with clean urls is that requests to files are being rewritten into index.php as well. My current config is: UrlToolkit { ToolkitID = drupal RequestURI exists Return Match (/files/*) Rewrite $1 Match ^/(.*) Rewrite /index.php?q=$1 } The above does not work. Drupal's apache set up is: <Directory /var/www/example.com> RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] </Directory>

    Read the article

  • Squid traffic tunneled through VPN

    - by NerdyNick
    So what I'm trying to do is have a Squid Proxy run on 1 machine along side a VPN connection. What I want to happen is all traffic running though the Squad Proxy would run though the VPN for its outbound. ie Desktop - (Squid Proxy - VPN) The goal is to allow my desktop selective tunneling through the VPN. So that Instant Messaging and the like that do not need to run through the VPN can go through my normal traffic. Typically I would go though a SSH Proxy but currently am forced to use VPN to gain entry into the office, and a Squid proxy seemed like it might work out the easiest for what I am needing. EDIT Realize I forgot to actually state what problem I'm running into. I have the Squid setup and verified it works, but once I connect to the VPN. All requests to Squid get accepted but Squid is unable to make the request over the VPN. So the client ends up just sitting there.

    Read the article

  • Recommended Configuration to setup Tomcat 7 on windows OS

    - by yashbinani
    I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

    Read the article

  • How to choose size for a cloud server (rackspace)

    - by Emil
    We're going to test the rackspace cloud next week to see how it's working with our web app. It's a LAMP environment with a lot of MySQL databases. How do I choose the "right" server size? On Rackspace I can choose slices with the memory of 256, 512, 1024, 2048, 4096 etc. Right now we don't have a lot of traffic (approx. 1000 visitors/day) but I thought the whole "cloud" idea was to not be limited and auto scale. Update: What I'm looking for is now a specification of what I need. I know it's too complex. I'm looking for examples, case studies etc. It would be interesting to hear something like "Yes we're serving 10 000 daily requests without spikes on a LAMP stack with only one slice on with 2 GB RAM".

    Read the article

  • Setting up an Active-Active IIS Cluster with ARR - is it possible?

    - by Ahmed Zubair
    I would like to know if we can setup an Active-Active IIS Cluster using Windows Cluster services that shares a common storage to store web content and WITHOUT the use of Windows NLB. I'm aware that this may not be a best practice or not a recommended setup, however, the setup is to be configured as below: Two web servers running IIS 7.5 (needs a common storage for web content) for HA and another set of two servers for sql cluster in active-passive mode for HA. Also is it possible to enable ARR on 2 node active-active IIS cluster for load balancing http requests? Appreciate if someone replies with both pros & cons of the setup.

    Read the article

  • Why are there tons of PHP processes open on my server?

    - by fiftyeight
    Today I saw that a website of mine isn't working so I ssh'd to the server and executed ps -eF. I see about 200 PHP processes that are running all for 4 hours. Apache is built with mpm event and mod fcgid. I killed all the PHP processes and now it's running fine, why does this happen? is this expected behavior? I don't really understand how processes how Apache keeps track of the number of PHP processes and their process IDs, so it would be nice if someone can also give some reference when I can read about this. Also, I used the "ab" command (Apache Benchmark) to see if this happens all the time, so I ran it about 4-5 times with 30 concurrent requests and again there are like 150 PHP processes running, when I keep running "ab" now it doesn't spawn more processes and the website is still working. Please shed some light on this! Thank you :)

    Read the article

  • Recommended RAM and disc space for Oracle 11g on Windows

    - by Álvaro G. Vicario
    I need to provide the recommended amount of RAM and disc space (divided in two partitions) so the customer can create an appropriate virtual machine to run Oracle. All I could find in the documentation was a brief listing with minimum RAM and typical/advanced install types. The virtual machine will run latest Oracle Standard Edition One (11g release 2 so far) under Windows Server 2008 x64 and will host a reasonably low traffic web application. How much RAM and disc must I ask for in order to be safe? (Feel free to ask for further details if I've omitted something relevant.) Update: Rough estimations: Database size: 10 MB after installation Growth rate: +3MB per day on average Size of database 'active' data: (not sure of what this means, there's not actual archive so I guess all data is current) Amount of data written per second in peak hours: a few KB Number of client sessions: 3 or 4 at most Frequency and response size of most heavy requests: some reports make heavy table JOINS that need up to 20 seconds to complete but they won't return more than a few thousand rows with plain text. The app also handles BLOBs (typical size from 50KB to 200KB)

    Read the article

  • Server not sending a SYN/ACK packet in response to a SYN packet

    - by jeff
    Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

    Read the article

  • AnyConnect SSL VPN split tunneling for a single website?

    - by Daniel Lucas
    We have a Cisco ASA 5510. We use split tunneling for AnyConnect SSL VPN clients. All internal addresses are tunnelled. Everything else is routed through the client's own internet connection. We use a SaaS service that only responds to requests when they come from one of our own public IP addresses. Because of this, VPN users are unable to access it currently. Is there a way to specify that a specific website should be tunneled and all others should not? NOTE: Worst case we will use a web bookmark on the clientless portal to tranlate through our network, but I'd like to see if the above is possible first.

    Read the article

  • Making lighttpd redirect from www.exampe.com to www.example.com/cgi-bin/index.pl

    - by jarmund
    What the title says.. www.example.com is defined in lighttpd.conf as a virtual host: $HTTP["host"] =~ "(^|\.)example.com$" { server.document-root = "/usr/www/example.com/http" accesslog.filename = "/var/log/www/example.com/access.log" $HTTP["url"] =~ ".pl$" { cgi.assign = (".pl" => "/usr/bin/perl" ) } } However, instead of going by the files listed in index-file.names (the usual index.html, default.html, etc), i want all requests to the root of the virtual host to be forwarded to /cgi-bin/index.pl. What's the easiest/best way of doing this? This need is a special case, and will only apply to this virtualhost. Is it possible to have that particular virtualhost send a redirect in the header?

    Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >