Search Results

Search found 49452 results on 1979 pages for 'type testing'.

Page 112/1979 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

  - by ladaghini

  I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

  Read the article

• MSTest Test Context Exception Handling

  - by Flip

  Is there a way that I can get to the exception that was handled by the MSTest framework using the TestContext or some other method on a base test class? If an unhandled exception occurs in one of my tests, I'd like to spin through all the items in the exception.Data dictionary and display them to the test result to help me figure out why the test failed (we usually add data to the exception to help us debug in the production env, so I'd like to do the same for testing). Note: I am not testing that an exception was SUPPOSED TO HAPPEN (I have other tests for that), I am testing a valid case, I just need to see the exception data. Here is a code example of what I'm talking about. [TestMethod] public void IsFinanceDeadlineDateValid() { var target = new BusinessObject(); SetupBusinessObject(target); //How can I capture this in the text context so I can display all the data //in the exception in the test result... var expected = 100; try { Assert.AreEqual(expected, target.PerformSomeCalculationThatMayDivideByZero()); } catch (Exception ex) { ex.Data.Add("SomethingImportant", "I want to see this in the test result, as its important"); ex.Data.Add("Expected", expected); throw ex; } } I understand there are issues around why I probably shouldn't have such an encapsulating method, but we also have sub tests to test all the functionality of PerformSomeCalculation... However, if the test fails, 99% of the time, I rerun it passes, so I can't debug anything without this information. I would also like to do this on a GLOBAL level, so that if any test fails, I get the information in the test results, as opposed to doing it for each individual test. Here is the code that would put the exception info in the test results. public void AddDataFromExceptionToResults(Exception ex) { StringBuilder whereAmI = new StringBuilder(); var holdException = ex; while (holdException != null) { Console.WriteLine(whereAmI.ToString() + "--" + holdException.Message); foreach (var item in holdException.Data.Keys) { Console.WriteLine(whereAmI.ToString() + "--Data--" + item + ":" + holdException.Data[item]); } holdException = holdException.InnerException; } }

  Read the article

• How to test views in ASP.NET MVC2 (ala RSpec)

  - by Dmitriy Nagirnyak

  Hi, I am really missing heavily the ability to test Views independently of controllers. The way RSpec allows to do it. What I want to do is to perform assertions on the rendered view (where no controller is involved!). In order to do so I should provide required Model, ViewData and maybe some details from HttpContextBase (when will we get rid of HttpContext!). So far I have not found anything that allows doing it. Also it might heavily depend on the ViewEngine being used. List of things that views might contain are: Partial views (may be nested deeply). Master pages (or similar in other view engines). Html helpers generating links and other elements. Generally almost anything in a range of common sense :) . Also please note that I am not talking about client-side testing and thus Selenium is just not related to it at all. It is just plain .NET testing. So are there any options to actually do the testing of views? Thanks, Dmitriy.

  Read the article

• JRuby wrong element type class java.lang.String(array contains char) related to JAVA_HOME

  - by Daryl

  I am on Ubuntu x64 bit running: java version "1.6.0_18" OpenJDK Runtime Environment (IcedTea6 1.8) (6b18-1.8-0ubuntu1) OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode) and jruby 1.4.0 (ruby 1.8.7 patchlevel 174) (2010-02-11 6586) (OpenJDK 64-Bit Server VM 1.6.0_18) [amd64-java] I have this code running on my Windows 7 computer at home. I recently copied over my whole folder over to Ubuntu, installed java, jruby, and associated gems but I get this error when I run my main file: jruby run.rb test =================Processing FREDERICKSBURG_1.1======================= ERROR IN TESTING wrong element type class java.lang.String(array contains char) /home/daryl/Desktop/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `to_java' /home/daryl/Desktop/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `split' /home/daryl/Desktop/work/Code/geografikos/lib/models/page.rb:103:in `sentences' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/lingpipe_svm.rb:34:in `extract' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:9:in `process' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `each' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `process' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `each' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `process' /home/daryl/Desktop/work/Code/geografikos/lib/statistics.rb:111:in `generate_all' /home/daryl/Desktop/work/Code/geografikos/lib/statistics.rb:105:in `each' /home/daryl/Desktop/work/Code/geografikos/lib/statistics.rb:105:in `generate_all' run.rb:56 The focus of the error is: ERROR IN TESTING wrong element type class java.lang.String(array contains char) Everything works fine on my windows machine. I figured I was getting this error because I did not have JAVA_HOME set however I added this to bashrc as: export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk and have confirmed: echo $JAVA_HOME /usr/lib/jvm/java-1.6.0-openjdk I can produce a similar error by removing my JAVA_HOME variable on windows: =================Processing FREDERICKSBURG_1.3======================= ERROR IN TESTING cannot convert instance of class org.jruby.RubyString to char C:/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `to_java' C:/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `split' C:/work/Code/geografikos/lib/models/page.rb:103:in `sentences' C:/work/Code/geografikos/lib/extractor/lingpipe_svm.rb:34:in `extract' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:9:in `process' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `each' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `process' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `each' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `process' C:/work/Code/geografikos/lib/statistics.rb:111:in `generate_all' C:/work/Code/geografikos/lib/statistics.rb:105:in `each' C:/work/Code/geografikos/lib/statistics.rb:105:in `generate_all' run.rb:56 It is obviously not exactly the same but I have a feeling this has to do with the java path. You can probably derive from the error that I am just trying to convert a ruby variable to java using to_java. This works fine on my windows machine and I have confirmed the gems are the same but I don't think this has to do with gems. I lied. I changed my JAVA_HOME back on my windows machine and this error still occurs. So now the code doesn't run on either machine. I recently installed git on my windows machine and added the code to a repository. But I haven't really done anything with it. All it said was it will convert all LF to CRLF...That shouldn't change anything though should it? Any ideas on why I am now getting these errors? I haven't changed anything on my windows machine in months except for installing git.

  Read the article

• Test Views in ASP.NET MVC2 (ala RSpec)

  - by Dmitriy Nagirnyak

  Hi, I am really missing heavily the ability to test Views independently of controllers. The way RSpec does it. What I want to do is to perform assertions on the rendered view (where no controller is involved!). In order to do so I should provide required Model, ViewData and maybe some details from HttpContextBase (when will we get rid of HttpContext!). So far I have not found anything that allows doing it. Also it might heavily depend on the ViewEngine being used. List of things that views might contain are: Partial views (may be nested deeply). Master pages (or similar in other view engines). Html helpers generating links and other elements. Generally almost anything in a range of common sense :) . Also please note that I am not talking about client-side testing and thus Selenium is just not related to it at all. It is just plain .NET testing. So are there any options to actually do the testing of views? Thanks, Dmitriy.

  Read the article

• Accessing Web.config directly in ASP.NET MVC 1

  - by Neil T.

  I'm trying to implement integration testing in my ASP.NET MVC 1.0 solution. The technologies in use are LINQ-to-SQL, NUnit and WatiN. I recently discovered a pattern that will allow me to create a testing version of the database on the fly without modifying the development version of the database. I needed this behavior in order to run my user interface tests in WatiN that may modify the database. The plan is to modify the connection string in the Web.config file, and pass that new connection string to the DataContext constructor. This way, I don't have to add routes or modify my URLs in order to perform the integration testing. I've set up the project so that the test setup can modify the connection string to point to the test database when the tests are running. The connection string is stored in web.config. The problem I'm having is that when I try to run the tests, I get a NullReferenceException when trying to access the HTTPContext. From everything that I have read so far, the HTTPContext is only available within the context of a controller. Here is the code for the property that is supposed to give me the reference to the Web.config file: private System.Configuration.Configuration WebConfig { get { ExeConfigurationFileMap fileMap = new ExeConfigurationFileMap(); // NullReferenceException occurs on this line. fileMap.ExeConfigFilename = HttpContext.Current.Server.MapPath("~\\web.config"); System.Configuration.Configuration config = ConfigurationManager.OpenMappedExeConfiguration(fileMap, ConfigurationUserLevel.None); return config; } } Is there something that I am missing in order to make this work? Is there a better way to accomplish what I'm trying to achieve?

  Read the article

• how do i implement / build / create an 'in memory database' for my unit test

  - by Michel

  Hi all, i've started unit testing a while ago and as turned out i did more regression testing than unit testing because i also included my database layer thus going to the database verytime. So, implemented Unity to inject a fake database layer, but i of course want to store some data, and the main opinion was: "create an in-memory database" But what is that / how do i implement that? Main question is: i think i have to fake the database layer, but doesn't that make me create a 'simple database' myself or: how can i keep it simple and not rebuilding Sql Server just for my unit tests :) At the end of this question i'll give an explanation of the situation i got in on the project i just started on, and i was wondering if this was the way to go. Michel Current situation i've seen at this client is that testdata is contained in XML files, and there is a 'fake' database layer that connects all the xml files together. For the real database we're using the entity framework, and this works very simple. And now, in the 'fake' layer, i have top create all kind of classes to load, save, persist etc. the data. It sounds weird that there is so much work in the fake layer, and so little in the real layer. I hope this all makes sense :)

  Read the article

• Best practice to test a web application, regarding domain name and integration with external service

  - by ycseattle

  I have run into these problems several times and was never able to find a comfortable solution. Let's say my website has the domain name MyDomain.com. When I run the tests on the test machine (a continuous integration server), I will modify the HOSTS file on this machine so the MyDomain.com is mapped to this local machine instead of the real production server. This doesn't work very well for many situations. For example, my application will create subdomain names user1.MyDomain.com dynamically but this is difficult to keep the testing flexible. Another problem is my web application will interact with Amazon S3, and sometimes other service like Amazon Simple Message Queue. I am only comfortable to include these interaction in my tests but I am never happy with my solution for mixing testing and production on Amazon services. Could somebody offer some tips on these issues? I would like to make my testing framework clean and flexible. I am sure this is a common question for all web applications and there must be a mature way to deal with these. Thanks!

  Read the article

• What Test Environment Setup do Committers Use in the Ruby Community?

  - by viatropos

  Today I am going to get as far as I can setting up my testing environment and workflow. I'm looking for practical advice on how to setup the test environment from you guys who are very passionate and versed in Ruby Testing. By the end of the day (6am PST?) I would like to be able to: Type one 1-command to run test suites for ANY project I find on Github. Run autotest for ANY Github project so I can fork and make TESTABLE contributions. Build gems from the ground up with Autotest and Shoulda. For one reason or another, I hardly ever run tests for projects I clone from Github. The major reason is because unless they're using RSpec and have a Rake task to run the tests, I don't see the common pattern behind it all. I have built 3 or 4 gems writing tests with RSpec, and while I find the DSL fun, it's less than ideal because it just adds another layer/language of methods I have to learn and remember. So I'm going with Shoulda. But this isn't a question about which testing framework to choose. So the questions are: What is your, the SO reader and Github project committer, test environment setup using autotest so that whenever you git clone a gem, you can run the tests and autotest-develop them if desired? What are the guys who are writing the Paperclip Tests and Authlogic Tests doing? What is their setup? Thanks for the insight. Looking for answers that will make me a more effective tester.

  Read the article

• How do I prevent qFatal() from aborting the application?

  - by Dave

  My Qt application uses Q_ASSERT_X, which calls qFatal(), which (by default) aborts the application. That's great for the application, but I'd like to suppress that behavior when unit testing the application. (I'm using the Google Test Framework.) I have by unit tests in a separate project, statically linking to the class I'm testing. The documentation for qFatal() reads: Calls the message handler with the fatal message msg. If no message handler has been installed, the message is printed to stderr. Under Windows, the message is sent to the debugger. If you are using the default message handler this function will abort on Unix systems to create a core dump. On Windows, for debug builds, this function will report a _CRT_ERROR enabling you to connect a debugger to the application. ... To supress the output at runtime, install your own message handler with qInstallMsgHandler(). So here's my main.cpp file: #include <gtest/gtest.h> #include <QApplication> void testMessageOutput(QtMsgType type, const char *msg) { switch (type) { case QtDebugMsg: fprintf(stderr, "Debug: %s\n", msg); break; case QtWarningMsg: fprintf(stderr, "Warning: %s\n", msg); break; case QtCriticalMsg: fprintf(stderr, "Critical: %s\n", msg); break; case QtFatalMsg: fprintf(stderr, "My Fatal: %s\n", msg); break; } } int main(int argc, char **argv) { qInstallMsgHandler(testMessageOutput); testing::InitGoogleTest(&argc, argv); return RUN_ALL_TESTS(); } But my application is still stopping at the assert. I can tell that my custom handler is being called, because the output when running my tests is: My Fatal: ASSERT failure in MyClass::doSomething: "doSomething()", file myclass.cpp, line 21 The program has unexpectedly finished. What can I do so that my tests keep running even when an assert fails?

  Read the article

• What Test Environment Setup do Top Project Committers Use in the Ruby Community?

  - by viatropos

  Today I am going to get as far as I can setting up my testing environment and workflow. I'm looking for practical advice on how to setup the test environment from you guys who are very passionate and versed in Ruby Testing. By the end of the day (6am PST?) I would like to be able to: Type one 1-command to run test suites for ANY project I find on Github. Run autotest for ANY Github project so I can fork and make TESTABLE contributions. Build gems from the ground up with Autotest and Shoulda. For one reason or another, I hardly ever run tests for projects I clone from Github. The major reason is because unless they're using RSpec and have a Rake task to run the tests, I don't see the common pattern behind it all. I have built 3 or 4 gems writing tests with RSpec, and while I find the DSL fun, it's less than ideal because it just adds another layer/language of methods I have to learn and remember. So I'm going with Shoulda. But this isn't a question about which testing framework to choose. So the questions are: What is your, the SO reader and Github project committer, test environment setup using autotest so that whenever you git clone a gem, you can run the tests and autotest-develop them if desired? What are the guys who are writing the Paperclip Tests and Authlogic Tests doing? What is their setup? Thanks for the insight. Looking for answers that will make me a more effective tester.

  Read the article

• Finding patterns of failure in a Unit Test

  - by Pekka

  I'm new to Unit Testing, and I'm only getting into the routine of building test suites. I have what is going to be a rather large project that I want to build tests for from the start. I'm trying to figure out general strategies and patterns for building test suites. When you look at a class, many tests come to you obviously due to the nature of the class. Say for a "user account" class with basic CRUD operations, being related to a database table, we will want to test - well, the CRUD. creating an object and seeing whether it exists query its properties change some properties change some properties to incorrect values and delete it again. As for how to break things, there are "fail" tests common to most CRUD classes like: Invalid input data types A number as the ID key that exceeds the range of the chosen data type Input in an incorrect character encoding Input that is too long And so on and so on. For a unit test concerned with file operations, the list of "breaking things" could be Invalid characters in file name File name too long File name uses incorrect protocol or path I'm pretty sure similar patterns - applicable beyond the unit test one is currently working on - can be found for most units that are being tested. Now my question is: Am I correct in seeing such "breaking patterns"? Or am I getting something completely wrong about Unit testing, and if I did it right, this wouldn't be an issue at all? Is Unit Testing as a process of finding as many ways to break the unit as possible the right way to go? If I am correct: Are there existing definitions, lists, cheat sheets for such patterns? Are there any provisions (mainly in PHPUnit, as that's the framework I'm working in) to automate such patterns? Is there any assistance - in the form of check lists, or software - to aid in writing complete tests?

  Read the article

• How can I write automated tests for iptables?

  - by Phil Frost

  I am configuring a Linux router with iptables. I want to write acceptance tests for the configuration that assert things like: traffic from some guy on the internet is not forwarded, and TCP to port 80 on the webserver in the DMZ from hosts on the corporate LAN is forwarded. An ancient FAQ alludes to a iptables -C option which allows one to ask something like, "given a packet from X, to Y, on port Z, would it be accepted or dropped?" Although the FAQ suggests it works like this, for iptables (but maybe not ipchains as it uses in the examples) the -C option seems to not simulate a test packet running through all the rules, but rather checks for the existence for an exactly matching rule. This has little value as a test. I want to assert that the rules have the desired effect, not just that they exist. I've considered creating yet more test VMs and a virtual network, then probing with tools like nmap for effects. However, I'm avoiding this solution due to the complexity of creating all those additional virtual machines, which is really quite a heavy way to generate some test traffic. It would also be nice to have an automated testing methodology which can also work on a real server in production. How else might I solve this problem? Is there some mechanism I might use to generate or simulate arbitrary traffic, then know if it was (or would be) dropped or accepted by iptables?

  Read the article

• Test server on a local network with XAMPP

  - by hopscotch1978

  Hi, I'm not very proficient with networks and could use some help. I've got a Win 7 desktop with XAMPP which acts as my local dev machine. I've configured a virtual host on the desktop which I'm able to access fine. If I'm understanding things correctly, the virtual host uses port 80 (<VirtualHost 127.0.0.1:80>). I've just tried to configure a separate Win XP laptop on the local wireless network to connect to the main desktop for testing purposes. I've added the IP address and virtual host name to my Hosts file on the laptop. My virtual host is imaginatively named "virtualhost1". When I type this into my laptop browser, it connects correctly to the main desktop and I get the XAMPP welcome screen. But I can't seem to get to the actual site, just the XAMPP welcome screen. It kind of jumps the browser to http://virtualhost1/xampp/. I think it's a port issue of some sort but I have no idea how to resolve it. I would get the same XAMPP welcome screen on my desktop if I omitted ":80" from the virtual host declaration. On my main desktop, typing "virtualhost1" to the browser address bar gives me the site correctly, not the XAMPP welcome screen. Help would be appreciated. Thank you.

  Read the article

• Apache Bench reports different result with same page

  - by Aspis

  I'm running into a little problem base-lining an Apache2/fcgi/php-fpm server I am setting up. 1) If I run: ab -n 15000 http://mysite.com/index.php. Apache Bench returns Time per request: 41ms but document length: 0 bytes and html transferred: 0 bytes. The Transfer rate: 7.9Kb/s. 2) If I run: ab -n 15000 http://mysite.com/ Apache Bench returns Time per request: 83ms along with the accurate document length and html transferred total. The APC cache status reports identical hit counts from both test. Also Apache Bench reports no errors in either case. Overall, no errors on any test sites and all logs are clean, etc. DocumentRoot is set to index.php so I would expect both of these test runs to produced a similar result. My 2 question(s) are: 1) why the discrepancy? 2) which is the correct result? I've seen plenty of results like test 1 posted (with out question) but frankly from my own experience and those of others, accurate testing is hard to come by. Even with out goofy issues like this.

  Read the article

• Power surge PC damage: How can I test all components of my PC without access to a second computer?

  - by Doug T.

  Ever since we had some crazy power surges last week my 64 bit Windows 7 PC has been acting strange. My USB network adapter disconnects from the wireless and can't detect the signal. I have to disable/reenable the adapter to detect it again. Also my wife has reported that the PC has rebooted a few times while I'm not sitting at it. Today I finally caught the reboot while I was using the PC. I got this blue screen of death. Stop Code 0x00000109: "Modification of system code or a critical data structure was detected." I followed the advice at the linked article and ran a memory test. I used memtest86 and its already found around 300,000 errors out of 8 gigs of ram. Now I'm worried -- what are the odds this is isolated to just my memory and not just a system wide problem? Isn't there a good chance that many other components are fried? More importantly, how can I test those other components? Are there tools similar to memtest I can use to test my motherboard/video card/power supply? If these are vender specific, is it typical for vendors to provide testing tools?

  Read the article

• post xml to Spring REST server returns Unsupported Media Type

  - by Mayra

  I'm trying to create a simple spring based webservice that supports a "post" with xml content. In spring, I define an AnnotationMethodHandler: <bean id="inboundMessageAdapter" class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter"> <property name="messageConverters"> <util:list> <bean class="org.springframework.http.converter.xml.MarshallingHttpMessageConverter"> <property name="marshaller" ref="xmlMarshaller"/> <property name="unmarshaller" ref="xmlMarshaller"/> </bean> </util:list> </property> </bean> And a jaxb based xml marshaller: <bean id="xmlMarshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="contextPaths"> <array> <value>com.company.schema</value> </array> </property> <property name="schemas"> <array> <value>classpath:core.xsd</value> </array> </property> </bean> My controller is annotated as follows, where "Resource" is a class autogenerated by jaxb: @RequestMapping(method = POST, value = "/resource") public Resource createResource(@RequestBody Resource resource) { // do work } The result of a webservice call is always "HTTP/1.1 415 Unsupported Media Type". Here is an example service call: HttpPost post = new HttpPost(uri); post.addHeader("Accept", "application/xml"); post.addHeader("Content-Type", "application/xml"); StringEntity entity = new StringEntity(request, "UTF-8"); entity.setContentType("application/xml"); post.setEntity(entity); It seems to me that I am setting the correct media type everywhere possible. Anyone have an ideas?

  Read the article

• InvalidCastException for two Objects of the same type

  - by LLEA

  hi, I have this weird problem that I cannot handle myself. A class in the model of my mvp-project designed as singleton causes an InvalidCastException. The source of error is found in this code line where the deserialised object is assigned to the instance variable of the class: engineObject = (ENGINE)xSerializer.Deserialize(str); It occurs whenever I try to add one of my UserControls to a Form or to a different UC. All of my UCs have a special presenter that access the above mentioned instance variable of the singleton class. This is what I get when trying to add a UC somewhere: 'System.TypeInitializationException: The type initializer for 'MVP.Model.EngineData' threw an exception. ---- System.InvalidCastException: [A]Engine cannot be cast to [B]Engine. Type A originates from 'MVP.Model, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' in the context 'LoadNeither' at location '[...]\AppData\Roaming\Microsoft\VisualStudio\9.0\ProjectAssemblies\uankw1hh01\MVP.Model.dll'. Type B originates from 'MVP.Model, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' in the context 'LoadNeither' at location '[...]\AppData\Roaming\Microsoft\VisualStudio\9.0\ProjectAssemblies\u_hge2de01\MVP.Model.dll'... So I somehow have two assemblies and they are not accessed from my project folder, but from a VS temp folder? I googled a lot and only found this: IronPython Exception: [A]Person cannot be cast to [B]Person. There is a solution offered, but first it concerns IronPhyton and second I don't know where to use it within my project? It would be just great, if u could help me out here :-) thx

  Read the article

• javascript removeChild(this) from input[type="submit"] onclick breaks future use of form.submit() un

  - by maximumduncan

  I have come across some strange behaviour, and I'm assuming a bug in firefox, when removing a input submit element from the DOM from within the click event. The following code reproduces the issue: <form name="test_form"> <input type="submit" value="remove me" onclick="this.parentNode.removeChild(this);" /> <input type="submit" value="submit normally" /> <input type="button" value="submit via js" onclick="document.test_form.submit();" /> </form> To reproduce: Click "remove me" Click "submit via js". Note that the form does not get submitted, this is the problem. Click "submit normally". Note that the form still gets submitted normally. It appears that, under Firefox, if you remove a submit button from within the click event it puts the form in an invalid state so that any future calls to form.submit() are simply ignored. But it is a javascript-specific issue as normal submit buttons within this form still function fine. To be honest, this is such a simple example of this issue that I was expecting the internet to be awash with other people exeriencing it, but so far searching has yealded nothing useful. Has anyone else experienced this and if so, did you get to the bottom of it? Many thanks

  Read the article

• Exporting non-public type through public API

  - by feelgood

  What if I have few factory methods returning non-public type and pairing set of methods which gives variables of this non-public type? This results with titled warning message in NetBeans. In result public API will contain only two pairing sets of methods. The reason is to make my type hierarchy sealed (like seald classes in Scala) and allow users only instantiate these types through factory methods. So we get DSL in some sense. For example, Schedule class represented by calendar fields' contraints. There are some types of contraints - Range, Singleton, List, FullSet - with NumberSet interface as a root. We don't want to expose these types and how Schedule interact with them. We just want the specification from the user. So we make NumberSet package-private. In class Schedule we create few factory-methods for constraints: NumberSet singleton(int value); NumberSet range(int form, int to); NumberSet list(NumberSet ... components); and some methods for creating Schedule object: Schedule everyHour(NumberSet minutes); Schedule everyDay(NumberSet minutes, NumberSet hours); User can only use them in the manner: Schedule s = Schedule.everyDay( singleton(0), list(range(10-15), singleton(8)) ); Is it bad idea?

  Read the article

• XMLBeans - xsi:type stripped using Axis2 and Tomcat?

  - by Matthew Gamble

  I’m new to XMLBeans and have been trying to use it to create an XML document as part of an axis2 web service. When I run my code as a standard Java application or as a standard servlet, the XML is correctly generated: <?xml version="1.0" encoding="UTF-8"?> <c:BroadsoftDocument protocol="OCI" xmlns:c="C"> <sessionId>000000001</sessionId> <command xsi:type="AuthenticationRequest" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <userId>admin</userId></command> </c:BroadsoftDocument> However, when the exact same code is run under Axis2 & Tomcat in a servlet I get: <?xml version="1.0" encoding="UTF-8"?> <c:BroadsoftDocument protocol="OCI" xmlns:c="C"> <sessionId>000000001</sessionId> <command> <userId>admin</userId></command> </c:BroadsoftDocument> This of course isn’t valid – the xsi:type of the “command” element is stripped when the code is run under Tomcat. Does anyone have any suggestions of what I could be doing wrong that would cause this type of issue only when running under Axis2? At first I thought it was a Tomcat issue, but after creating a generic servlet and running the exact same code I don't have any issues. I've tried playing with the XMLOptions for XMLBeans, but couldn't seem to resolve the problem. The options I'm currently using are: xmlOptions = new XmlOptions(); xmlOptions.setCharacterEncoding("UTF-8"); xmlOptions.setUseDefaultNamespace(); xmlOptions.setSaveAggressiveNamespaces(); xmlOptions.setSavePrettyPrint();

  Read the article

• Facebook app submit action type

  - by Axel

  I've been reading about this on StackOverflow and facebook doc, yet I dont seem to be able to submit my action type. I have the following code from the FB doc <script type="text/javascript"> console.log("Function begins"); function postForm() { console.log(FB); FB.api( '/me/concoursvelirium:form', 'post', { recipe: 'http://concours.gestev.com/fbvel2012/form.php' }, function(response) { console.log("Stay"); if (!response || response.error) { console.log("error: " + response); } else { console.log('Cook was successful! Action ID: ' + response.id); } }); } </script> I have added my values from FB autogenerated values: <head prefix="og: http://ogp.me/ns# fb: http://ogp.me/ns/fb# concoursvelirium: http://ogp.me/ns/fb/concoursvelirium#"> <meta property="fb:app_id" content="194081877384051" /> <meta property="og:type" content="concoursvelirium:form" /> <meta property="og:url" content="Put your own URL to the object here" /> <meta property="og:title" content="Sample Form" /> <meta property="og:image" content="https://s-static.ak.fbcdn.net/images/devsite/attachment_blank.png" /> And yet I see no output in the console past the console.log(FB); I have no idea what I'm doing wrong. I'm also getting the Unsafe JavaScript attempt to access frame with URL error, but I have read here that I should just ignore it. Ty, Axel

  Read the article

• boost lambda::bind return type selection

  - by psaghelyi

  I would like to call a member through lambda::bind. Unfortunately I have got to members with the same name but different return type. Is there a way to help the lambda::bind to deduce the right return type for a member function call? #include <vector> #include <iostream> #include <algorithm> #include <boost/bind.hpp> #include <boost/lambda/lambda.hpp> #include <boost/lambda/bind.hpp> using namespace std; using namespace boost; struct A { A (const string & name) : m_name(name) {} string & name () { return m_name; } const string & name () const { return m_name; } string m_name; }; vector<A> av; int main () { av.push_back (A ("some name")); // compiles fine find_if(av.begin(), av.end(), bind<const string &>(&A::name, _1) == "some name"); // error: call of overloaded 'bind(<unresolved overloaded function type>, const boost::lambda::lambda_functor<boost::lambda::placeholder<1> >&)' is ambiguous find_if(av.begin(), av.end(), lambda::bind(&A::name, lambda::_1) == "some name"); return 0; }

  Read the article

• Instantiate type variable in Haskell

  - by danportin

  EDIT: Solved. I was unware that enabling a language extension in the source file did not enable the language extension in GHCi. The solution was to :set FlexibleContexts in GHCi. I recently discovered that type declarations in classes and instances in Haskell are Horn clauses. So I encoded the arithmetic operations from The Art of Prolog, Chapter 3, into Haskell. For instance: fac(0,s(0)). fac(s(N),F) :- fac(N,X), mult(s(N),X,F). class Fac x y | x -> y instance Fac Z (S Z) instance (Fac n x, Mult (S n) x f) => Fac (S n) f pow(s(X),0,0) :- nat(X). pow(0,s(X),s(0)) :- nat(X). pow(s(N),X,Y) :- pow(N,X,Z), mult(Z,X,Y). class Pow x y z | x y -> z instance (N n) => Pow (S n) Z Z instance (N n) => Pow Z (S n) (S Z) instance (Pow n x z, Mult z x y) => Pow (S n) x y In Prolog, values are insantiated for (logic) variable in a proof. However, I don't understand how to instantiate type variables in Haskell. That is, I don't understand what the Haskell equivalent of a Prolog query ?-f(X1,X2,...,Xn) is. I assume that :t undefined :: (f x1 x2 ... xn) => xi would cause Haskell to instantiate xi, but this gives a Non type-variable argument in the constraint error, even with FlexibleContexts enabled.

  Read the article

• XML Schema and element with type string

  - by svick

  I'm trying to create an XML Schema and I'm stuck. It seems I can't define an element with string content. What am I doing wrong? Schema: <?xml version="1.0"?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://ponderka.wz.cz/MusicLibrary0" targetNamespace="http://ponderka.wz.cz/MusicLibrary0"> <xs:element name="music-library"> <xs:complexType> <xs:sequence> <xs:element name="artist" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> Document: <?xml version="1.0"?> <music-library xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://ponderka.wz.cz/MusicLibrary0 data0.xsd" xmlns="http://ponderka.wz.cz/MusicLibrary0"> <artist>a</artist> </music-library> The validator says: Element <artist> is not allowed under element <music-library>. Reason: The following elements are expected at this location (see below) <artist> Error location: music-library / artist Details cvc-model-group: Element <artist> unexpected by type '{anonymous}' of element <music-library>. cvc-elt.5.2.1: The element <music-library> is not valid with respect to the actual type definition '{anonymous}'.

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >