Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 112/227 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

  • How can I port forward over a VPN NAT?

    - by Charlie
    I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

    Read the article

  • How to configure a static wildcard subdomain with dnsmasq.

    - by Prody
    I have a network behind a NAT with a few machines. The machines are: router - NAT, dnsmasq, forwarding - directly connected to the inet server - which runs ssh, www and some other stuff clients - which do stuff on server I also have mydomain.com. server.mydomain.com is pointing to my connection's IP (single IP), which is the router, which forwards ports to server. Server, has a httpd running, which serves different sites based on vhosts. So I have site1.server.mydomain.com, site2.. The problem is that all the traffic is going thru the router, and when I check logs I always see the router's IP for everything (so it's hard to see who is running the script with the while(1)). I would just ServerAlias site1.server.local, but most of the sites have a root URL saved somewhere on top of which other URLs are built, so I can't do that. The solution for me would be telling dnsmasq somehow to answer to *.mydomain.com with server's IP. Is this possible somehow?

    Read the article

  • Wireless range extender throughput extremely slow.

    - by Alan B
    I've got a Belkin 54G router connected to the internet, and a Belkin range extender model F5D7132. I can get the range extender connected to the parent router SSID no problem, in repeater mode as opposed to access point mode. My Windows 7 laptop connects to the extender, which has a different SSID, and it connects with the full 5 bars. The issue is that when going through the extender internet performance is murderously slow, even getting the config pages of the extender or router is bad. When I connect directly to the router, all is well.

    Read the article

  • Could 0x800CCC0E in Outlook be caused by bad wireless connection?

    - by AndrejaKo
    I have a computer connected to a WiFi access point/router/modem. Sometimes, I get page not found errors and similar when opening a browser window, sometimes pings fail and it looks like the router's signal isn't very good. On the other hand, I get around 4 bars of signal strength in windows and graph looks good in Inssider. I also never get dropped connection to the router. My main problem is that I often get errors (such as 0x800CCC0E) in Outlook 2010 that after some searching appear to be connected to bad server connection. I'm using GMail over IMAP and all settings are correct. I didn't have similar errors on my previous router, but I'm not 100% sure that they appeared after switching to current one. It may have worked for some time without errors. There are also around 3000 messages on the server and the size of mailbox is around 12 GiB, which may contribute to the problems. On the other hand, there are at least 24 other networks in the 2.4 GHz range which I'm using and the number may have increased since I switched routers. Should I try solving this by getting a router with stronger signal?

    Read the article

  • How to configure something like "Reflexive ACL" on OpenBSD?

    - by Earlz
    My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

    Read the article

  • Win 2008 Server configuration

    - by user123790
    Let me preface my question by saying I'm a novice in regards to server configuration. It's been 12+ years since I've attempted this. What we (our small office) are trying to achieve is to setup a Win 2008 server (located in a home) in a home network configuration (basic wireless router w/DHCP) that we (the office) can VPN to from our office. I have installed the software, installed DHCP, removed DHCP from the router, set the scope for 100 IPs and am now looking for information as to where I go from here? I believe I need to configure DNS and possibly set up static routes on the router for the home devices that need internet? The wireless clients are not receiving IPs is the current issue that I'd like to tackle. Also, would it be feasible to use the router's DHCP to assign IPs rather than having the server do it? If so, what would be the most direct way to accomplish this? I appreciate any help in this matter. Thanks

    Read the article

  • small Windows network w/ printer issue

    - by user33666
    printer 1 connected to the desktop printer 2 connected to the same desktop that desktop is connected via Cat 5 to a wireless router a notebook is connected to that same router via WiFi The desktop Control Panel has just been reconfigured to share printers. (I assume this means that the desktop will now allow a notebook coming through the router to be able to access the two printers that are presently hooked up via the desktop--am I correct? Is that what it means?) The desktop can still print to either printer. It is presently okay. This notebook/printer relationship is a new configuration. The notebook, however, can't print at all (yet it can access the internet just fine). Any suggestions for it to be able to access the printers and be able to print via the desktop via the router? Thank you for any assistance.

    Read the article

  • Periodic internet connection drops

    - by user9647
    My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

    Read the article

  • Is Samba "remote browse sync" possible across OpenVPN tunnel?

    - by John Reynolds
    I'm connecting 2 TomatoUSB (Shibby build on WNR3500L v2) routers with an OpenVPN routed connection: ----------------------- ----------------------- | Router 1, subnet 20 | <--tunnel--> | Router 2, subnet 21 | ----------------------- ----------------------- Router 1 is the OpenVPN server and Router 2 is a client. Clients attached to the routers on both subnets can ping clients on the other subnet, so the tunnel and routing works. I've enabled file sharing on both, in order to get their Samba WINS servers running. Is it possible to get name resolution across the tunnel? I've tried remote browse sync = 192.168.21.1 in /etc/smb.conf on the server side, to no avail. Also tried using the IP adress that the client gets from the OpenVPN address pool (usually 10.8.0.something), but still no joy.

    Read the article

  • wireless to wired internet

    - by Mark T
    My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

    Read the article

  • WIFI connection not working

    - by chris verwey
    We have a wireless network that is set to secure, it does show as unsecure on my laptop, and desktop connect to router but no internet access. other computers on the network require password to connect to router and get internet access. Iphone and Ipads connect using password and also have internet access, what can I do to fix it. Laptop = dell e6410 Router = netgear The laptop work on other wireless networks without any problem

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router. All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled. Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this? How do I fix it?

    Read the article

  • Remote desktop connection over internet without port forwarding?

    - by hellbell.myopenid.com
    Hello, let's say that we have this situation. I want to remote desktop connection to my friend over the internet, but I don't have premission for port forwarding on the router, and my friend also can't configure his router. So the question is how to connect to computer without port forwarding, I know that is out there some programs like teamviewer, or some else that solve that task, but what I looking for is the some free site that can make "bridge" between are two computer, or is it possible to install on computer some program that simulate virtual router or something like this http://www.youtube.com/watch?v=SIof7kFTgJE .... I need this cause I have my own simple remote desktop connection program, but I can't connect to other computer outside network cause don't have premission to configure router :( any comment, link, advice, or tutorials will be very helpful :)

    Read the article

  • What are the most common dangerous domains that I should block?

    - by Dalia
    I am trying to configure my wireless router to block domains that are potentially dangerous to privacy, security, and bandwidth-hogs. Is there a list of domains that I can block at the router level? On a machine level, I have set the hosts file from www.mvps.org and that works on my machine. However, I want to implement something at the router level too - so that all computers in my household are somewhat protected.

    Read the article

  • Can't Ping - Wireless network of home

    - by Naunidh
    Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

    Read the article

  • Network Table assistance

    - by mitchnufc
    I am designing a small network and have came up with the following table I am just wondering if this seems right, would appreciate some feedback, thanks. Network/Router First IP Last IP Subnet Host Broadcast Router 1 162.10.0.1 162.10.0.7 255.255.255.248 162.10.0.0 162.10.0.8 Network 1 162.10.1.1 162.10.2.253 255.255.254.0 162.10.1.0 162.10.2.254 Network 2 162.10.0.9 162.10.0.14 255.255.255.248 162.10.0.8 162.10.0.15 Router 2 162.10.0.17 162.10.0.18 255.255.255.252 162.10.0.16 162.10.0.19 Network 3 162.10.0.21 162.10.0.146 255.255.255.128 162.10.0.20 162.10.0.147 Router one is the IP assigned by the ISP

    Read the article

  • Transfer iptables rules to another server (almost) real time

    - by MrShunz
    I'm running 2 cPanel servers with ConfigServer Security & Firewall plugin. One of the functions of the plugin is to block via iptables (temporarily and/or permanently) IPs which fail various authentications (POP3/IMAP, SMTP, FTP, webmail, mod_security and such). Now, i'd like to push those IP blocks to the border router to drop packets as soon as possible (and doing so protecting the other machines on the network). Keep in mind that after N failed logins IP is blocked for 5 minutes, then re-allowed. If multiple bans occours in an hour IP is blocked permanently and should be unlocked "by hand". So I need a near realtime solution. What I'm looking for is a better way than firing some cronjobs both on cPanels and border router to: dump the rules to file transfer the file to border router (via scp/sftp) load the rules from the file in the border router I'm aware that I will need some scripts to parse and modify the rules as cPanels have one ethernet interface and some aliases while border router has two ehternet interfaces and some loopbacks. All machines involved use Linux. EDIT as per @pjmorse comment. The plugin consists of a bunch of perl and config files. The part I'm intrested in is a process which scans logfiles (lfd) and installs iptables rules (and sends an alert email). Fact is, it upgrades quite often (one or two times a week) and itself is 7000 lines of perl so I'm not comfortable on tampering with it.

    Read the article

  • setting up vpn server

    - by Lock
    I need help in visualising how to setup our VPN box when we move to our new network with Telstra. We have a safe@office 500P, which has a public IP and a private IP of 192.168.19.2. It is physically connected to our router, which has 4 different interfaces, one being 192.168.19.1. On the VPN box, we have a static route to forward everything to 192.168.19.1 which is the router, and from there it works out where to go. Now, we are moving to a Telstra WAN and things are setup a little differently. Our head office router has only 3 interfaces- 1 is for the link to the switch that has the fibre connection (so our route to the internet and other branches), 1 is for our 10.10.20.x network and one is for the local branch network. I really have no idea how to set this up as with the new setup, we will not have a port for it to plug into on the router. Could I just plug it into the 10.10.20.x network? Would I have to give it a public IP or can we just forward through the ports that it would use? Another suggestion was to VLAN our switch into two networks- one for the 10.10.20.x network and one for the network the VPN currently sits on (192.168.19.x), and setup the router to trunk between the port and the switch. Not sure how to do this. Sorry VPN's are definitely not my strong suit. Any advice appreciated!

    Read the article

  • What is wrong with my home network? (Routing and connection issues)

    - by David
    I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

    Read the article

  • Slow Routing Over LAN (Wired)

    - by reverendj1
    I'm having issues with my router acting very slow (Adtran Netvanta 3458). We have two networks, let's call them A and B. When I run netperf from two servers on network A (no routing) I get speeds along the lines of 900 Mbps. Which makes sense, since we have all 1Gbps switches. When testing A to B (or vice-versa) I get speeds along the lines of 22Mbps. I have also tested connecting my laptop to the switchports on the router, and testing two servers on network A (no routing) and got speeds around 90 Mbps. Which makes sense since the switchports on the router are 100Mbps. Does anyone have any idea why routing would be so slow? We bought the router over a year ago, and we think it has been doing this since then, but we never actually tested it before. (network B isn't really used much, so we didn't notice much) We were implementing a site-to-site VPN and noticed it was ridiculously slow, so we started testing basic routing performance. I have ruled out cabling and router CPU/memory utilization. Adtran looked at my config, but didn't see anything wrong with it.

    Read the article

  • Randomly unusable wireless connection. Oddest issue ever...

    - by Hallucynogenyc
    I have two desktop computers a laptop and a smartphone. All of them connect perfectly to my router (WRT54GL with Tomato firmware), but randomly (once a week maybe) something odd happens: For over an hour or so one of the desktop computers (Windows 7 Pro x64) will just refuse to connect properly to the router. Only that computer and only to that network. I can connect all the other machines to the router perfectly and I can connect properly to other networks with that machine. What I mean by "not being able to connect properly" I mean that the OS will just tell me "not able to connect to.." or that it will connect but then say that it has no Internet access or it connects but will then take minutes to load any website, even the router web interface. I've tried to change from WPA2 to WEP and back to WPA2, I've tried different network adapters (one internal PCI card and one USB external card), removing networks from Windows and adding again... without making any difference. It works for some days but at the end, it ends happening at some time. I just have no clue on what the hell could be going on here. I first thought it was the network adapter, then the router, then Windows... Thanks in advance

    Read the article

  • recent unreliable wireless connection on 10.04 and 10.10

    - by gabkdlly
    Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

    Read the article

  • recent unreliable wireless connection

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

    Read the article

  • Best way to protect website application code

    - by Gaz_Edge
    Background I have a web application that I host on my own server. I have clients who use the application as is, but some have asked if they can host the application on their own server. This enables them to have their own URLS rather than mine. The application only forms part of their website so I'm assuming it will not be possible for my server to respond to a direct call to their domain etc To give some examples, i currently have urls like www.mydomain.com/profile, www.mydomain.com/index.php?option=someoption&view=someview&id=1 What my clients' want is www.theirdomian.com/profile, www.theirdomian.com/index.php?option=someoption&view=someview&id=1 etc Question My question is, what is the best way for me to allow them to use their own URLs with my application, without giving them all the backend source code and databases to install on their server? One way I thought would be to create a router.php file that sits on their server. The router then asks my server to output the html. The router modifies all the links etc in the html source and outputs the new html through the clients server. When a link is clicked on the clients site, the router receives the request and modifies the url to get the data from my server etc. Is this an effective way to achieve what I want, or is it way off the mark.

    Read the article

  • Cannot connect to Internet via Wifi

    - by lvogel
    I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

    Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >