Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 113/607 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Unknown problem causing major computer failure, Booting problem with windows 7, mainly with 0x0000000A

    - by ken
    Where do I begin? OS=Windows 7 I think it all started when I ran an installation file. I suspect it may have been a virus (even though AVG scan didnt pick anything up). The installation failed, computer crashed then restarted. In the middle of the reboot, I get BSOD. Normal boot up doesnt work so I use safe mode. Method 1: Not a problem I thought cos I will do what I normally do and that was to recover from my image file. Unfortunately, my Acronis software cant recover in safe mode. Method 2: I created a bootable disc for the Acronis recovery software. Managed to boot to Acronis and started the recovery from image file. This fail with some error message (did not manage to record). Something to do with not be able to copy to $AVG folder. Method 3: At this stage, assumed it was still a virus causing the problem so decided to format that partition to remove everything and hopefully the virus too. Had a lot of problems trying to bypass the system to allow me to format but (i think- more on this later) I managed to do that. Image was recovered, thought problem was resolved. Tried to boot windows but new error: Boot Manager is missing. Read up on this and managed to copy the Boot Manager from my Laptop's Manufacturer's partition (partition contains factory setup image file). Windows loaded but new BSOD with 0x000000A problem. Method 4: Attempted to reinstall factory settings but this failed cos i suspect by formating the partition, I may have removed the recovery software. Tried to create a bootable dvd of factory setting but machine is so bad it continues to crash. Bootable dvd method failed. Method 5:Spent alot of time reading up on this error, even installed a software to help scan and fix the problem. Scan failed and software required money! Anyway, lots of BSOD with different error message like 0x00000001A and 0x0000000D1. Error message changes with some reboots. Method 6: Found a hotfix from the windows site to fix 0x0000000A problem, great I thought! In safe mode, I cant install the file cos of error:0x8007043c. Tried to then install the fix in normal mode but installation just hangs. Returned to safe mode and followed advice to bypass 0x8007043c by changing the BITS status (read here: http://www.vistaheads.com/forums/microsoft-public-windowsupdate/181931-error-number-0x8007043c-windows-update.html). However, my machine at this time is so flaky that it hangs everytime i right mouse click the computer icon. I am at my wits end. Ya help or ideas? Cheers

    Read the article

  • Windows 7 booting and startup repair issues

    - by aardvark
    I have a MSI FR720 laptop with Windows 7 and Lubuntu partions. For quite a while (6 months or so) I've been having issues booting from my hard drive, it'd take me between 5 minutes and several hours for me to be able to have it recognize the hard drive as a bootable device. I did several disk checks on it, and my hard drive seems in perfect condition, and the fact that booting would usually only work after removing the hard drive and trying to reset it in its slot or lightly shaking it makes me think it had something to do with the connection in the hard drive slot as opposed to the hard drive itself. I was having particular issues with it detecting the hard drive today so I decided to try booting it from an external hard drive dock. It detected it first try and so far has had no problems finding the bootable partitions on my hard drive. When I selected my Windows 7 partition from the boot menu it said that it hadn't been shut down properly last time and needed startup repair. I've done this several times over the last 6 months, so this is hardly unusual. I do startup repair, it fails, and then I try to do a system restore. The system restore also failed, and it says that no files were changed. I restart and try it again. However, this time when I get to the startup repair it's not detecting a Windows OS. I tried clicking next and doing a startup repair but the repair is always failing. If I ignore the startup repair option and instead select "Launch windows normally" it will get to the windows animation, stop halfway through and then crash into a BSoD. I can't read the error on the screen because it immediately switches to back and tries to restart. This is my first time asking a question like this online, so let me know if I need to provide any extra information and I'll do my best to give it I tried using diskpart to find the list of partitions and see if one's labelled as an active partition, but it says that no disk were detected. I can run Lubuntu just fine. I can also see all of my Windows 7 files from it EDIT: The startup repair diagnosis and repair log is this: -- Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: Check for updates Result: Completed successfully. Error code = 0x0 Time taken = 15ms Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Time taken = 31ms Root cause found. If a hard disk is installed, it is not responding. -- Any chance that this is a result of me doing this through an external dock through a USB drive?

    Read the article

  • Can't run init script on boot after another init script

    - by Colin McQueen
    I have three init scripts and the Broker init script runs fine, but when I try to run the Consumer init script and then the Data Collector init script, the only process that is running is the Broker. I added the symbolic links to the run levels using update-rc.d for each script and I also changed the number prefixes in the symbolic links to try and run the scripts in the proper order but that did not work. I am able to run the scripts from the terminal and they work fine but they need to all be started on boot. Any ideas as to why my other scripts are not running? Also inside my Consumer and Data Collector I am running: su user1 -c 'java -jar foo.jar' to start the services. Also the Consumer Java class sits and waits for a message from the queue, so the Java code does not stop until I specify the stop argument for the init script. The Broker has to start first, then the Consumer, then the Data Collector. Adding the symbolic links for the runlevels: sudo update-rc.d Broker defaults 10 90 sudo update-rc.d Consumer defaults 15 85 sudo update-rc.d DataCollector defaults 20 80

    Read the article

  • Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash

    - by mseika
    Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash Thursday 20th September 9.30 – 16.30 This is 1-day, face-to-face training is designed for your Storage Implementation Specialists and will help them in their path to Specialisation, as they prepare for the Storage Implementations Assessments for ZFSSA. Please read carefully the notes below on the required equipment for attendees. Agenda Module 1: Product Overview Module 2: Installation and Configuration ZFS Lab 1: Installation Module 3: Clustering Module 4: File and Data Services ZFS Lab 2: Creating Projects ZFS Lab 3: Creating a Share ZFS Lab 4: Snapshots and Clones ZFS Lab 5: CLI Overview Module 5: Maintenance ZFS Lab 6: Dashboard overview Module 6: Analytics ZFS Lab 7: Analytics Prerequisites for attendees Provide basic administration support for the Solaris OS and/or Windows Desktop/Server OS Understand the fundamentals of data storage administration Understand the fundamentals of Transmission Control Protocol/Internet Protocol (TCP/IP) networking and administration Troubleshoot server and network system software and hardware IMPORTANT: Equipment that attendees will have to bring to the class The attendees must bring their own laptops and have successfully installed the Virtual Box instance and the 7000 Series Simulator. To download Virtual Box and the Simulator click here. Attendees must have the Simulator running in advance of the class. For technical support on the download/installation of the Simulator, please send email to [email protected] Please register here

    Read the article

  • Cedarview drivers boot to a blank screen

    - by map7
    I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • Ubuntu 12.04 taking too much time to boot

    - by adarshdinesh
    Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

    Read the article

  • External monitor is blank if I boot with the monitor plugged in

    - by Ronald
    Ubuntu 12.04 has problem with Intel GM45 Chipset, featuring the the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD I have a COMPAQ Presario CQ70 laptop with an Intel GM45 chipset that features the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD. I was using the second HDMI video port to drive both a projector or a second monitor. Everything was working fine under Ubuntu 8.04, 9.04, 10.04 and 11.04, however, when I upgraded to 12.04 the second monitor stopped working. What I mean when I say stopped working is: boot with monitor plugged in. Blank screen! Power off, unplug monitor and power on everything works. Plug in monitor (only mode that works in Mirror mode) two monitors that look same. Close laptop lid. screen goes blank only option for useful system is power off and unplug monitor. If I attempt to Adjust the monitor to maximum resolution that the monitor will handle and turn off mirror mode nothing can be moved onto that screen. This all worked fine with earlier versions of Ubuntu, is there a notes about the changes to the graphics management system in 12.04, like there is for the resolver change?

    Read the article

  • ASUS EPC 1015CX won't boot with display after installing additional drivers

    - by Dinesh
    I have a ASUS EPC 1015CX with Ubuntu 12.04 LTS installed using wubi alongside Windows 7. It worked perfectly after installing except that the supported screen resolution was only 800*600 instead of 1024*600. The specifications of the 1015CX device can be found here I tried installing additional drivers which was Broadcom for wireless and Cedarview-drm. By this time there was no display coming up after the boot. I could hear a voice and then the letters I typed got pronounced correctly. So, I guessed the issue has to be with the graphic terminal. I tried repair broken packages in the menu and booted and the display is now at 1024*600. But, if I restart normally the problem continues like before. As per what I found out after searching, I again opened additional drivers and installed Cedarview-graphics-driver. I tried restarting hoping it will work. But again, the result was same. There was no display but the system was working. I did more searching and followed the instructions found here. But still the result was same. I am keen to switch to linux from windows after hearing and learning great things about it. I know this community is good and always helping. I wanted to thank you all for the help in advance. Please let me know what I am doing wrong and help me to switch to linux from this same old windows.

    Read the article

  • mdadm starts resync on every boot

    - by Anteru
    Since a few days (and I'm positive it started shortly before I updated my server from 13.04-13.10) my mdadm is resyncing on every boot. In the syslog, I get the following output [ 0.809256] md: linear personality registered for level -1 [ 0.811412] md: multipath personality registered for level -4 [ 0.813153] md: raid0 personality registered for level 0 [ 0.815201] md: raid1 personality registered for level 1 [ 1.101517] md: raid6 personality registered for level 6 [ 1.101520] md: raid5 personality registered for level 5 [ 1.101522] md: raid4 personality registered for level 4 [ 1.106825] md: raid10 personality registered for level 10 [ 1.935882] md: bind<sdc1> [ 1.943367] md: bind<sdb1> [ 1.945199] md/raid1:md0: not clean -- starting background reconstruction [ 1.945204] md/raid1:md0: active with 2 out of 2 mirrors [ 1.945225] md0: detected capacity change from 0 to 2000396680192 [ 1.945351] md: resync of RAID array md0 [ 1.945357] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1.945359] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 1.945362] md: using 128k window, over a total of 1953512383k. [ 2.220468] md0: unknown partition table I'm not sure what's up with that detected capacity change, looking at some old logs, this does have appeared earlier as well without a resync right afterwards. In fact, I let it run yesterday until completion and rebooted, and then it wouldn't resync, but today it does resync again. For instance, yesterday I got: [ 1.872123] md: bind<sdc1> [ 1.950946] md: bind<sdb1> [ 1.952782] md/raid1:md0: active with 2 out of 2 mirrors [ 1.952807] md0: detected capacity change from 0 to 2000396680192 [ 1.954598] md0: unknown partition table So it seems to be a problem that the RAID array does not get marked as clean after every shutdown? How can I troubleshoot this? The disks themselves are both fine, SMART tells me no errors, everything ok.

    Read the article

  • mdadm: breaks boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • mdadm: brakes boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Impossible to boot Ubuntu on a USB stick (OS X Montain Lion)

    - by user109513
    I know this has been discussed over and over but I still cannot run Ubuntu on a USB stick. Here's the step I followed: 1. I downloaded Ubuntu 12.10 (ubuntu-12.10-desktop-i386.iso) from http://www.ubuntu.com/download/desktop which I renamed 'ubuntu.iso'. I bought my Mac mid-2010, it has an Intel processor. 2. I formated my 16GB USB stick with HFS+ File System following this tutorial: http://www.switchingtomac.com/tutorials/how-to-format-a-drive-or-partition-with-the-hfs-file-system 3. I opened a terminal and typed: hdiutil convert -format UDRW -o ~/Downloads/ubuntu.img ~/Downloads/ubuntu.iso It created ubuntu.iso.dmg 4. I ran 'diskutil list' and identified the device node assigned to the USB. 5. I unmounted it: diskutil unmountDisk /dev/disk2 6. Then, I entered the command: sudo dd if=~/Downloads/ubuntu.img.dmg of=/dev/rdisk2 bs=1m. It seemed to work. A Mac message poped up saying that the system doesn't recognized the disk, I pressed 'ignore'. 7. I ejected the USB using diskutil eject /dev/disk2, then removed the USB. 8. I rebooted the computer, plugged the USB key, pressed ALT.I could see my Macintosh partition and my Windows partition, but couldn't see my USB stick. Any help will be very appreciated :) Victor

    Read the article

  • Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

    - by rahi
    I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

    Read the article

  • Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

    - by user2851032
    I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

    Read the article

  • Install Mac OS Lion on Macbook with existing Ubuntu 12.04 dual boot

    - by kash
    I don't usually create my own questions, because I can find what I need through other people's questions. However, this one doesn't seem to be anywhere, except in one place where someone is talking about not using Apple hardware. So here it goes. I am using Apple hardware. I have a MacBook 1,1 with Intel Core2Duo running Ubuntu Precise Pangolin flawlessly. I never considered starting with Mac OSx and dual-booting because I never liked Mac OS. Now that I'm realizing that the only way I'm going to be able to run my DAW (Reaper) nicely and use a Firewire recording interface is to run Mac OSx, I'm considering it again. I want to go the opposite direction of most people and install Mac OSx next to an existing Ubuntu installation and have a boot menu with refit. I've installed refit in Ubuntu and I've converted the .dmg file for Mac OS Lion to a .iso file. Now, should I mount the .iso in Ubuntu and run it there, or burn a DVD and restart? I'm trying to gauge how to do this without hurting my existing Ubuntu installation. I will of course keep looking for existing answers in the meantime.

    Read the article

  • Cryptswap boot error - can't mount?

    - by woody
    I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted? I have already tried this solution with no success. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 cat /proc/swaps output is: Filename Type Size Used Priority /dev/dm-0 partition 4123644 0 -1 Is my swap not setup correctly or how can i fix my boot message?

    Read the article

  • Upgrading Ubuntu(32 bit) 10.10 -> 11.04 fails and causes a kernel panic on boot

    - by Ubuntu Upgrade
    On Ubuntu 10.10 machine Upgrade to Ubuntu 11.04 using the update manager. The upgrade fails and leaves the system in an unstable state. When I reboot the system I get a kernel panic on boot. The error points to /opt/abc/runtime/lib/libc.so.6. By researching on this I found that there is a third party software abc causes problem. It has it's own runtime(libc) library. In /lib/ directory there is a link file /lib/ld-abc.so.2 ---/opt/abc/runtime/lib/ld-linux.so.2. If we rename this file to /lib/abc.so.2 or remove this file the the upgrade is success. Here is the upgrade log of where it crashes(apt-term.log) ===== Services restarted successfully. Processing triggers for libc-bin ... ldconfig deferred processing now taking place /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.11' not found (required by /usr/bin/dpkg) /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) ===== Could you please let me know what would be the problem of having a run time link library file in /lib directory. Does the ubuntu upgrade check the 3rd part runtime as well?

    Read the article

  • Used mountmanager now Ubuntu hangs on boot

    - by fpghost
    I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

    Read the article

  • Ubuntu 12.04 fresh install wont boot up

    - by user147220
    im running ubuntu 12.04 and it refuses to boot up. the screen will come on for a second, the mosue will appear, then itll go black again all inside about 3 seconds. i let it just do that for a while and eventually a window popped up saying i had a display issue. I didn't have a mouse but there was a button saying "ok" at the bottom that i couldnt click on. i hit enter, got through that screen, now im looking at another that says "What would you like to do?" - run in low-graphics mode for just one session - reconfigure graphics - troubleshoot the error - exit to console login then two buttons, cancel, and ok. I dont have a mouse and its not letting me navigate between these options with tab. firstly, if i make it through these windows will it get me into the computer so i can try and fix whats going on? also, whats going on here? also, how can i click on these buttons without the use of tab or a mouse?

    Read the article

  • How can I dual boot my iphone or ipad to run a very simple custom os?

    - by Jim98
    I am an experienced C/C++ programmer and have worked with assembly and many other programing language and I want to start a project as a learning process. I want to try and run a simple custom os on the iphone or ipad. What knowledge would I need to do this, and how does the iphone or ipad bootloader load the os and how could I modify it to load a custom os? Im not really sure what to ask here so I really just need to get as much information as possible so I could ask some more informed questions to get my project started Thanks

    Read the article

  • Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

    - by F.L.
    My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

    Read the article

  • Install Linux Mint on PC without bootable CD

    - by crosenblum
    Unfortunately my PC's CD drive is not bootable; I have such a mixture of SATA and IDE drives, so until I have more money to redo my controller setup, I can't boot from any cd. Currently, I have a DVD burned with latest version of Linux Mint, and I have an USB drive with an old version of Mint. I have a partition ready to install Linx Mint into, but no idea how to install it, since I can only boot to my hard drive. I am totally unable to boot to CD, so that is definitely out. My main partition is WinXP Pro SP3. Is there software I can use to format my Linux partition, so that I can then just copy Mint over to that partition? Or is there a better way to install linux mint? I have to do it within Windows XP, since that's all that I can boot right now. I have considered Mint4Win, but that doesn't allow a full installation of Linux Mint. Any ideas?

    Read the article

  • Linux Uninstalling errors

    - by Zack
    I want to uninstall back-track 5 so I deleted the partitions for back-track os. After deleting the partition that used to be for back-track becomes free space as in picture. But I can't delete that partition nor creating a new partition. I used G-Parted from hiren boot cd but it says there is no partition table, you need to create a partition table. But actually I have 5 partitions already. And I thought of restarting might fix it. But after showing post screen my laptop show grub error. I don't know what to do, and I tried to install back-track again to fix the problem but it also says that i do not have any partitions. I can only boot windows by passing through hiren boot cd. But most of the time My computer is not recognizing the external dvd drive, nor the internal so i have to restart again and again, hoping to catch the time computer recognize the dvd drive. Can I change the boot loader to correct the grub error? SOLVED : I have solved the grub error by writing MBR again by using EasyBCD But I still have the format error.

    Read the article

  • "sr0" I/O read boot error in Xubuntu 12.10

    - by Entropicurity
    Just recently upgraded Xubuntu 12.10 after having installed 12.04 originally. Ever since that happened, any time I inserted a disk into my DVD/CD reader/writer I would end up getting a number of error messages from my DVD player/Audio player softer, typically with any of them either crashing or returning a GStreamer backend error. So doing some research I tried to mount it manually, and it typically returned the error messages you'll see below: (using the dmesg | grep "sr0" command) [17545.435584] end_request: I/O error, dev sr0, sector 0 [17545.492968] sr 3:0:0:0: >[sr0] [17545.492981] sr 3:0:0:0: >[sr0] [17545.492992] sr 3:0:0:0: >[sr0] [17545.493003] sr 3:0:0:0: >[sr0] CDB: [17545.493020] end_request: I/O error, dev sr0, sector 0 [17545.493058] EXT3-fs (sr0): error: unable to read superblock [17545.553224] sr 3:0:0:0: >[sr0] [17545.553237] sr 3:0:0:0: >[sr0] [17545.553247] sr 3:0:0:0: >[sr0] [17545.553258] sr 3:0:0:0: >[sr0] CDB: [17545.553275] end_request: I/O error, dev sr0, sector 0 [17545.553312] EXT4-fs (sr0): unable to read superblock [17545.611482] sr 3:0:0:0: >[sr0] [17545.611494] sr 3:0:0:0: >[sr0] [17545.611504] sr 3:0:0:0: >[sr0] [17545.611514] sr 3:0:0:0: >[sr0] CDB: [17545.611531] end_request: I/O error, dev sr0, sector 0 [17545.611568] FAT-fs (sr0): unable to read boot sector When I grepped this, the number of error messages just seemed to spill all over the screen, and typically all revolve around the I/O error. I then went into VLC and tried to run the stuff through there, but for some reason it won't read with the default devices. Instead I have to manually input sr0 into each of the /dev/ references and it will play just fine, until I exit out of the program, at which point I have to re-input everything. I have already installed all the media dependencies, both open source and restricted, through the software center. I just found this strange, as out of the box 12.04 there wasn't any problem what so ever. At this point, it could be that all my audio CD's are not in a format that is familiar with the OS (I've read in some places that EXTF4 has issues with this) but I don't see how that could be a problem when the above error messages even tested to see if it is EXT3 as well? I've tried my best to troubleshoot this up till now using existing topics, but it seems that this is a regular problem with a multitude of varying factors that incorporate into it, including but not limited to read/write problems with the format of the CD and right protection. Is there something integral that I am missing?

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >