Search Results

Search found 3061 results on 123 pages for 'cgi effects'.

Page 113/123 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Good Email Notification Sending Service

  - by Philibert Perusse

  I need to send a few but important email notifications to individual users. For instance, when they register their software I send them a confirmation email. Right now, I am using 'sendmail' from my Perl CGI script to do the job. Most of my automated email are lost or marked as junk. Unfortunately, I am using shared hosting services and not a very good control over the SPF and SenderID DNS records. Even more bad, some other user of that shared server has been infected with some kind of SPAM-BOT and the IP is now blacklisted until further notice! Anyway I just don't want to deal with this kind of headache. I am looking for an online service that I will be able to subscribe to and pay something like 0.10$ per email I send with no monthly fees. I just need and API to be able to send the email from PHP or Perl code I will have to write. I have been looking around at all those "Email Sending Services" and they are all wrapped around creating campains and managing lists for bulk email marketing distribution and newsletters. But remember, I want to send an email notification to a "single" recipient. So far, I have look at MailChimp, SocketLabs, iContact, ConstantContact, StreamSend and so many others to no avail. I have seen one comment at Hackers News saying that MailChimp have an API for transactional e-mails (i.e. ad-hoc ones to welcome a user for example). So you're not just restricted to using them for bulk emails But I cannot find this in the API documentation supplied, maybe this was removed. Any suggestions out there. Here is a summary of my requirements: Allows ad hoc sending of email to a single recipient. Throughput may well be throttle I don't care, i am sending like 2-5 emails a day. API available in PHP or Perl to connect to that web service. Ideally I can send HTML formatted emails, otherwise I will live with text only. Solution not too expensive, between 0.01$ and 0.25$ per email would be acceptable. No recurring monthly fees.

  Read the article

• What should I do or don't do to avoid Delphi "push dword" bug.

  - by Maksee

  I found that Delphi 5 generates invalid assembly code in specific cases. I can't understand in what cases in general. The example below produces access violation since a very strange optimization occurs. For a byte in a record or array Delphi generates push dword [...], pop ebx, mov .., bl that works correctly if there are data after this byte (we need at least three to push dword correctly), but fails if the data is inaccessible. I emulated the strict boundaries here with win32 Virtual* functions Specifically the error occurs when the last byte from the block accessed inside FeedBytesToClass procedure. And if I try to change something like using data array instead of object property of remove actionFlag variable, Delphi generates correct assembly instructions. const BlockSize = 4096; type TSomeClass = class private fBytes: PByteArray; public property Bytes: PByteArray read fBytes; constructor Create; destructor Destroy;override; end; constructor TSomeClass.Create; begin inherited Create; GetMem(fBytes, BlockSize); end; destructor TSomeClass.Destroy; begin FreeMem(fBytes); inherited; end; procedure FeedBytesToClass(SrcDataBytes: PByteArray; Count: integer); var j: integer; Ofs: integer; actionFlag: boolean; AClass: TSomeClass; begin AClass:=TSomeClass.Create; try actionFlag:=true; for j:=0 to Count-1 do begin Ofs:=j; if actionFlag then begin AClass.Bytes[Ofs]:=SrcDataBytes[j]; end; end; finally AClass.Free; end; end; procedure TForm31.Button1Click(Sender: TObject); var SrcDataBytes: PByteArray; begin SrcDataBytes:=VirtualAlloc(Nil, BlockSize, MEM_COMMIT, PAGE_READWRITE); try if VirtualLock(SrcDataBytes, BlockSize) then try FeedBytesToClass(SrcDataBytes, BlockSize); finally VirtualUnLock(SrcDataBytes, BlockSize); end; finally VirtualFree(SrcDataBytes, MEM_DECOMMIT, BlockSize); end; end; Initially the error occured when I used access to RGB data of bitmap bits, but the code there is too complex so I narrowed it to this fragment. So the question is what is here so specific that makes Delphi produce push,pop,mov optimization. I need to know this in order to avoid such side effects in general.

  Read the article

• What's the best way to structure this Linq-to-Events Drag & Drop code?

  - by Rob Fonseca-Ensor

  I am trying to handle a drag & drop interaction, which involves mouse down, mouse move, and mouse up. Here is a simplified repro of my solution that: on mouse down, creates an ellipse and adds it to a canvas on mouse move, repositions the ellipse to follow the mouse on mouse up, changes the colour of the canvas so that it's obvious which one you're dragging. var mouseDown = Observable.FromEvent<MouseButtonEventArgs>(canvas, "MouseLeftButtonDown"); var mouseUp = Observable.FromEvent<MouseButtonEventArgs>(canvas, "MouseLeftButtonUp"); var mouseMove = Observable.FromEvent<MouseEventArgs>(canvas, "MouseMove"); Ellipse ellipse = null; var q = from start in mouseDown.Do(x => { // handle mousedown by creating a red ellipse, // adding it to the canvas at the right position ellipse = new Ellipse() { Width = 10, Height = 10, Fill = Brushes.Red }; Point position = x.EventArgs.GetPosition(canvas); Canvas.SetLeft(ellipse, position.X); Canvas.SetTop(ellipse, position.Y); canvas.Children.Add(ellipse); }) from delta in mouseMove.Until(mouseUp.Do(x => { // handle mouse up by making the ellipse green ellipse.Fill = Brushes.Green; })) select delta; q.Subscribe(x => { // handle mouse move by repositioning ellipse Point position = x.EventArgs.GetPosition(canvas); Canvas.SetLeft(ellipse, position.X); Canvas.SetTop(ellipse, position.Y); }); the XAML is simply <Canvas x:Name="canvas"/> There's a few things I don't like about this code, and I need help refactoring it :) First of all: the mousedown and mouseup callbacks are specified as side effects. If two subscriptions are made to q, they will happen twice. Second, the mouseup callback is specified before the mousemove callback. This makes it a bit hard to read. Thirdly, the reference to the ellipse seems to be in a silly place. If there's two subscriptions, that variable reference will get overwritten quite quickly. I'm sure that there should be some way we can leverage the let keyword to introduce a variable to the linq expression that will mean the correct ellipse reference is available to both the mouse move and mouse up handlers How would you write this code?

  Read the article

• Would Like Multiple Checkboxes to Update World PNG Image Using Mogrify to FloodFill Countries With C

  - by socrtwo

  Hi. I'm seeing in another forum if the best way to do this is with Javascript or Ajax but I'm wondering if there is an even easier simpler way. I'm trying to create a web service where users can check which countries they have visited from a list of 175 or so and a World map image would then instantly update with a filled color. There are other similar services, but I'm envisioning mine to be both updating from checks in checkboxes and by clicking on the target country in the displayed image say with an imagemap. Additionally other solutions display all the visited countries in the same color. I would like different colors for different countries or at least for those countries that touch. Eventually I would like to include a feature that enables the choice of which colors to assign countries. I found a Sourceforge project called pwmfccd. It's simply an open source image of the world and the coordinates on the PNG image for all the countries. You can use mogrify from ImageMagick and floodfill to fill the countries with color. I have done this successfully, locally with batch files. My ISP has told me where mogrify is located, basically "/usr/bin/mogrify". I now have a horrendously complicated cgi script which if it worked is set to redraw the world map image with each checkbox. It's here. It also redraws the whole web page with each check. The web page starts here. Of course this is not at all efficient, and I think probably the real way to go is Ajax or Javascript, so that maybe just the image gets changed and redrawn, not the whole web page. Sorry I don't even know the difference between Javascript and Ajax and their relative merits at this point. I suppose you could make just one part of the image update with each check or click on the image instead of even just the image redrawing, but I have never even heard of a hint at being able to do that for irregularly shaped image elements like countries. So I guess an Image map and sister checkbox entries tied to mogrify events redrawing the user's personal copy of the image with an image refresh would be the only way to go. So how do you do this with something other than Javascript or Ajax or is that definitely the way to go and if so, how would you do it? Or can you after all cut up a web based image into irregular puzzle shaped piece which you can redraw individually at will. Thanks in advance for reading and considering answering this post.

  Read the article

• Tunnel over HTTPS

  - by ephemient

  At my workplace, the traffic blocker/firewall has been getting progressively worse. I can't connect to my home machine on port 22, and lack of ssh access makes me sad. I was previously able to use SSH by moving it to port 5050, but I think some recent filters now treat this traffic as IM and redirect it through another proxy, maybe. That's my best guess; in any case, my ssh connections now terminate before I get to log in. These days I've been using Ajaxterm over HTTPS, as port 443 is still unmolested, but this is far from ideal. (Sucky terminal emulation, lack of port forwarding, my browser leaks memory at an amazing rate...) I tried setting up mod_proxy_connect on top of mod_ssl, with the idea that I could send a CONNECT localhost:22 HTTP/1.1 request through HTTPS, and then I'd be all set. Sadly, this seems to not work; the HTTPS connection works, up until I finish sending my request; then SSL craps out. It appears as though mod_proxy_connect takes over the whole connection instead of continuing to pipe through mod_ssl, confusing the heck out of the HTTPS client. Is there a way to get this to work? I don't want to do this over plain HTTP, for several reasons: Leaving a big fat open proxy like that just stinks A big fat open proxy is not good over HTTPS either, but with authentication required it feels fine to me HTTP goes through a proxy -- I'm not too concerned about my traffic being sniffed, as it's ssh that'll be going "plaintext" through the tunnel -- but it's a lot more likely to be mangled than HTTPS, which fundamentally cannot be proxied Requirements: Must work over port 443, without disturbing other HTTPS traffic (i.e. I can't just put the ssh server on port 443, because I would no longer be able to serve pages over HTTPS) I have or can write a simple port forwarder client that runs under Windows (or Cygwin) Edit DAG: Tunnelling SSH over HTTP(S) has been pointed out to me, but it doesn't help: at the end of the article, they mention Bug 29744 - CONNECT does not work over existing SSL connection preventing tunnelling over HTTPS, exactly the problem I was running into. At this point, I am probably looking at some CGI script, but I don't want to list that as a requirement if there's better solutions available.

  Read the article

• paypal ipn case is not calling in paypal "pay now"

  - by Ipsita Rout

  paypal ipn case is not calling in paypal "pay now". In paypal button the following is set. return : "http://localhost/paypal.php?ch=return" cancel_return : "cancel_return" value="http://localhost/paypal.php?ch=cancel" notify_url : value="http://localhost/paypal.php?ch=ipn" paypal_form.php <form name="paypal" action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="rm" value="2"> <input type="hidden" name="no_notes" value="1"> <input type="hidden" name="custom" value="1"> <input type="hidden" name="business" value="[email protected]"> <input type="hidden" name="return" id="return" value="http://localhost/paypal.php?ch=return"> <input type="hidden" name="cancel_return" id="cancel_return" value="http://localhost/paypal.php?ch=cancel"> <input type="hidden" name="notify_url" id="notify_url" value="http://localhost/paypal.php?ch=ipn"> <input type="image" src="https://www.sandbox.paypal.com/WEBSCR-640-20110429-1/en_GB/i/btn/btn_paynow_SM.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online."> <img alt="" border="0" src="https://www.sandbox.paypal.com/WEBSCR-640-20110429-1/en_GB/i/scr/pixel.gif" width="1" height="1"> paypal.php <? include('db_connect.php'); $choice=isset($_GET['ch'])?$_GET['ch']:''; switch($choice){ case 'return': print "Thank You For Buying this product,Please Visit Again,If is there any complements Then suggest us.."; break; case 'ipn': $sql="INSERT INTO paypal(add_date) VALUES(now())"; mysql_query($sql); $x = fopen('test1.txt','w+'); $str2 = 'post data:dfydfhgfhjg'; foreach($_POST as $k=>$v){ $str2 .= $k.'--'.$v; } fwrite($x,$str2); fclose($x); break; case 'cancel': print "Thank You for visiting this site,Please inform your friend to buy products through paypal which is easy service... "; break; } ?>

  Read the article

• css formatting problems

  - by Davey

  So I wanted to mess around with Sass so I created this tiny incredibly simple little page. For reasons unknown to me when I add a top-margin to #content it effects my wrapper div instead. Any information as to why this is happening would be greatly appreciated. Thanks! Here is the page live: http://cheapramen.com/omg/ html: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <link rel="stylesheet" href="stylesheets/screen.css" type="text/css" media="screen" /> <title>YO</title> </head> <body> <div id="wrapper"> <div id="content"> <div class="dog"> Bury me with my money </div> </div> </div> </body> </html> Sass html body background-color: #000 padding: 0 margin: 0 height: 100% #wrapper background-color: #fff width: 900px height: 700px margin: 0 auto #content width: 500px margin: 150px 0 0 50px .dog color: #FF3836 font-size: 25px text-shadow: 2px 2px 2px #000 width: 500px height: 500px -moz-border-radius: 5px -webkit-border-radius: 5px border: 18px solid #FF3836 Css that the Sass spits out html body { background-color: #000; padding: 0; margin: 0; height: 100%; } #wrapper { background-color: #fff; width: 900px; height: 700px; margin: 0 auto; } #content { width: 500px; margin: 150px 0 0 50px; } .dog { color: #FF3836; font-size: 25px; text-shadow: 2px 2px 2px #000; width: 500px; height: 500px; -moz-border-radius: 5px; -webkit-border-radius: 5px; border: 18px solid #FF3836; }

  Read the article

• How to get jQuery to work with Prototype

  - by thinkfuture

  Ok so here is the situation. Been pulling my hair out on this one. I'm a noob at this. Only been using rails for about 6 weeks. I'm using the standard setup package, and my code leverages prototype helpers heavily. Like I said, noob ;) So I'm trying to put in some jQuery effects, like PrettyPhoto. But what happens is that when the page is first loaded, PrettyPhoto works great. However, once someone uses a Prototype helper, like a link created with link_to_remote, Prettyphoto stops working. I've tried jRails, all of the fixes proposed on the JQuery site to stop conflicts... http://docs.jquery.com/Using_jQuery_with_Other_Libraries ...even done some crazy things likes renaming all of the $ in prototype.js to $$$ to no avail. Either the prototype helpers break, or jQuery breaks. Seems nothing I do can get these to work together. Any ideas? Here is part of my application.html.erb <%= javascript_include_tag 'application' %> <%= javascript_include_tag 'tooltip' %> <%= javascript_include_tag 'jquery' %> <%= javascript_include_tag 'jquery-ui' %> <%= javascript_include_tag "jquery.prettyPhoto" %> <%= javascript_include_tag 'prototype' %> <%= javascript_include_tag 'scriptalicious' %> </head> <body> <script type="text/javascript" charset="utf-8"> jQuery(document).ready( function() { jQuery("a[rel^='prettyPhoto']").prettyPhoto(); }); </script> If I put prototype before jquery, the prototype helpers don't work If I put the noconflict clause in, neither works. Thanks in advance! Chris BTW: when I try this, from the jQuery site: <script> jQuery.noConflict(); // Use jQuery via jQuery(...) jQuery(document).ready(function(){ jQuery("div").hide(); }); // Use Prototype with $(...), etc. $('someid').hide(); </script> my page disappears!

  Read the article

• MVC 2 AntiForgeryToken - Why symmetric encryption + IPrinciple?

  - by Brad R

  We recently updated our solution to MVC 2, and this has updated the way that the AntiForgeryToken works. Unfortunately this does not fit with our AJAX framework any more. The problem is that MVC 2 now uses symmetric encryption to encode some properties about the user, including the user's Name property (from IPrincipal). We are able to securely register a new user using AJAX, after which subsequent AJAX calls will be invalid as the anti forgery token will change when the user has been granted a new principal. There are also other cases when this may happen, such as a user updating their name etc. My main question is why does MVC 2 even bother using symmetric encryption? Any then why does it care about the user name property on the principal? If my understanding is correct then any random shared secret will do. The basic principle is that the user will be sent a cookie with some specific data (HttpOnly!). This cookie is then required to match a form variable sent back with each request that may have side effects (POST's usually). Since this is only meant to protect from cross site attacks it is easy to craft up a response that would easily pass the test, but only if you had full access to the cookie. Since a cross site attacker is not going to have access to your user cookies you are protected. By using symmetric encryption, what is the advantage in checking the contents of the cookie? That is, if I already have sent an HttpOnly cookie the attacker cannot override it (unless a browser has a major security issue), so why do I then need to check it again? After having a think about it it appears to be one of those 'added layer of security' cases - but if your first line of defence has fallen (HttpOnly) then the attacker is going to get past the second layer anyway as they have full access to the users cookie collection, and could just impersonate them directly, instead of using an indirect XSS/CSRF attack. Of course I could be missing a major issue, but I haven't found it yet. If there are some obvious or subtle issues at play here then I would like to be aware of them.

  Read the article

• PayPal sandbox Buy Now Problem

  - by Tushar Ahirrao

  Hi , I have paypal sandbox test account. I want to create a 'buy Now' button. I am trying it with GWT. But its even not working with simple HTML form. It displays a 'Buy Now' button on HTML page and after clicking on it redirects to PayPal site. Where it ask to login to buy product but after that it goes on displying message: The email address or password you have entered does not match our records. Please try again. I am using buyer user to purchase product. I am pretty sure about the username and password. Providing here the simple HTML form which I am trying: <form action="https://www.paypal.com/cgi-bin/webscr" method="post" id="payPalForm"> <input type="hidden" name="item_number" value="1"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="no_note" value="1"> <input type="hidden" name="business" value="[email protected]"> <input type="hidden" name="lc" value="US"> <input type="hidden" name="button_subtype" value="services"> <input type="hidden" name="cn" value="Add special instructions to the seller"> <input type="hidden" name="no_shipping" value="2"> <input type="hidden" name="rm" value="1"> <input type="hidden" name="bn" value="PP-BuyNowBF:btn_paynow_SM.gif:NonHosted"> <input type="hidden" name="variables" value="http://google.com"> <input type="hidden" name="cancel_return" value="http://google.com"> <input type="hidden" name="notify_url" value="http://google.com"> <input type="hidden" name="return" value="http://freelanceswitch.com/payment-complete /"> <input type="hidden" name="currency_code" value="USD"> <input name="item_name" type="hidden" value="Deal Name"> <input name="amount" type="hidden" value="500"> <input type="submit" name="Submit" value="Submit"> </form> Please advice. Thank you.

  Read the article

• CSS3 Hover transition strange behavior

  - by Aleksandar Ivanov

  So I was playing around with transition/hover effects so that's the code. <pre> <code> /* HTML */ section> a href="#" title="button">CLICK!</a> // deleted the lt sign for visibility reasons! a href="#" title="button">CLICK!</a> a href="#" title="button">CLICK!</a> a href="#" title="button">CLICK!</a> /section> /********/ /* CSS */ section{ width: 700px; height: 500px; margin: 250px auto; position: relative; background: #08c; } section a{ border-radius: 51px; background: #e60; line-height: 100px; text-align: center; color: #04e; font-size: 24px; font-weight: bold; font-family: tahoma; text-decoration: none; display: block; width: 100px; height: 100px; } section a:nth-child(1){ position: absolute; top: -100px; left: -100px; -webkit-transition: left 2s ease; } section a:nth-child(2){ position: absolute; top: -100px; right: -100px; -webkit-transition: top 2s ease; } section a:nth-child(3){ position: absolute; bottom: -100px; right: -100px; -webkit-transition: right 2s ease; } section a:nth-child(4){ position: absolute; bottom: -100px; left: -100px; -webkit-transition: bottom 2s ease; } section a:nth-child(1):hover,section a:nth-child(1):focus{ left: 800px; } section a:nth-child(2):hover{ top: 600px; } section a:nth-child(3):hover{ right: 800px; } section a:nth-child(4):hover{ bottom: 600px; } /*******/ </code> </pre> BUT, I stumbled upon a strange thing. When I hover over a link its starts getting to its right position applied by the hover, but at some point (always different) the effect stops and it gets back to its original position! Have anyone seen this and know what is the problem ?

  Read the article

• Coldfusion Components:- The argument passed to the function is not of type numeric

  - by salim.vali

  Hi I have a simple form form.cfm:- <cfset Registr = createObject("component", "forms.Registr") /> <cfset setFoo = createObject('component','forms.Registr).putNUsr(username,password,rating) /> <form name="regFrm" action="#cgi.script_name#" method="post" onsubmit="submitform();" > <tr><td>Username:</td> <td><input type="text" name=" Username" value="#form. Username#" ></td></tr> <tr><td>Password:</td> <td><input class="" type="password" name="password" value="#form.password#" ></td></tr> <tr><td>Rate:</td> <select name="rating" > <option value="" ></option> <cfloop query="qGetReting"> <option value="#rating_id#" <cfif form. rating eq prof_id>selected</cfif> >#rating#</option> </cfloop> </select> </td> </tr> </form> Now there is this cfc called Registr.cfc in the "forms" folder which has an insert-function called 'putNUsr'the code for 'Registr.cfc' is as follows. <cfcomponent> <cffunction name="putNUsr" returntype="void" displayname="" output="no"> <cfargument name="password" type="string" required="true"> <cfargument name="rating" type="numeric" required="true"> <cfargument name="username" type="string" required="true"> <cfquery datasource="#application.xyz#" name="q_putNUsr"> insert into users (username , password , rating) values( <cfqueryparam value="#arguments. username#" cfsqltype="CF_SQL_VARCHAR" />, <cfqueryparam value="#arguments.password#" cfsqltype="CF_SQL_VARCHAR" />, <cfqueryparam value="#arguments.rating#" cfsqltype="CF_SQL_INTEGER" ) </cfquery> </cffunction> </cfcomponent> I am able to populate the DB with the data if I do not use the form field "rating" which is numeric. Else i am getting the error as follows:- The RATING argument passed to the putNUsr function is not of type numeric. If the component name is specified as a type of this argument, it is possible that either a definition file for the component cannot be found or is not accessible. KINDLY HELP -S Vali

  Read the article

• Help me please, javascript place problem or another thing??

  - by ilkdrl

  <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Urunler.aspx.cs" Inherits="Urunler" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <meta http-equiv="content-type" content="text/html; charset=utf-8" /> <meta http-equiv="content-language" content="en" /> <link href="rss/example_ticker.css" rel="stylesheet" type="text/css" /> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" type="text/javascript"></script> <script src="rss/jquery.zrssfeed.min.js" type="text/javascript"></script> <script src="rss/jquery.vticker.js" type="text/javascript"></script> <title></title> <script type="text/javascript" src="lightbox/js/prototype.js"></script> <script type="text/javascript" src="lightbox/js/scriptaculous.js?load=effects,builder"></script> <script type="text/javascript" src="lightbox/js/lightbox.js"></script> <link rel="stylesheet" href="lightbox/css/lightbox.css" type="text/css" media="screen" /> <style type="text/css"> ........... ........... ........... <td style="background-color: #808080"> <script type="text/javascript"> $(document).ready(function () { $('#ticker1').rssfeed('http://www.xxxxxxx.com/map.asp').ajaxStop(function () { $('#ticker1 div.rssBody').vTicker({ showItems: 3 }); }); }); </script> <div id="ticker1" > </div> Hi, i have two scripts.lightbox and rss. lightbox script works very well in mywebform1 but rss feed dont work.I didnot solve that?Help me please. PS: on the other hand, my another webpage(mywebform2) in same website has only rss feed and works very well.

  Read the article

• How to I serialize a large graph of .NET object into a SQL Server BLOB without creating a large bu

  - by Ian Ringrose

  We have code like: ms = New IO.MemoryStream bin = New System.Runtime.Serialization.Formatters.Binary.BinaryFormatter bin.Serialize(ms, largeGraphOfObjects) dataToSaveToDatabase = ms.ToArray() // put dataToSaveToDatabase in a Sql server BLOB But the memory steam allocates a large buffer from the large memory heap that is giving us problems. So how can we stream the data without needing enough free memory to hold the serialized objects. I am looking for a way to get a Stream from SQL server that can then be passed to bin.Serialize() so avoiding keeping all the data in my processes memory. Likewise for reading the data back... Some more background. This is part of a complex numerical processing system that processes data in near real time looking for equipment problems etc, the serialization is done to allow a restart when there is a problem with data quality from a data feed etc. (We store the data feeds and can rerun them after the operator has edited out bad values.) Therefore we serialize the object a lot more often then we de-serialize them. The objects we are serializing include very large arrays mostly of doubles as well as a lot of small “more normal” objects. We are pushing the memory limit on a 32 bit system and make the garage collector work very hard. (Effects are being made elsewhere in the system to improve this, e.g. reusing large arrays rather then create new arrays.) Often the serialization of the state is the last straw that courses an out of memory exception; our peak memory usage is while this serialization is being done. I think we get large memory pool fragmentation when we de-serialize the object, I expect there are also other problem with large memory pool fragmentation given the size of the arrays. (This has not yet been investigated, as the person that first looked at this is a numerical processing expert, not a memory management expert.) Are customers use a mix of Sql Server 2000, 2005 and 2008 and we would rather not have different code paths for each version of Sql Server if possible. We can have many active models at a time (in different process, across many machines), each model can have many saved states. Hence the saved state is stored in a database blob rather then a file. As the spread of saving the state is important, I would rather not serialize the object to a file, and then put the file in a BLOB one block at a time. Other related questions I have asked How to Stream data from/to SQL Server BLOB fields? Is there a SqlFileStream like class that works with Sql Server 2005?

  Read the article

• HTML wrapper div over embedded flash object cannot be "clickable" by jQuery

  - by Michael Mao

  Hi all: I've been trying to do as the client requested : redirect to campaign page then to destination page once a customer clicks on the top banner in swf format. You can check what's been done at :http://ausdcf.org If you are using Firefox, Chrome or Safari, I suspect you can reach the destination page. However, if you are using IE or Opera, I doubt it. I think to cause of such a weird problem is: The swf ojbects don't have a link to url, SO I have to hack the theme template file like this : <div id="header">'; /* * A quick and dirty way to put some swf into PHP, and rotate among them ... */ //available banners $banners = array( 'http://localhost/smf/flash/banner_fertalign_1.swf', 'http://localhost/smf/flash/banner_fertalign_2.swf', 'http://localhost/smf/flash/banner_fertalign_3.swf' ); //get random banner srand((double) microtime() * 1000000); $rand = rand(0,count($banners)-1); echo '<div id="top_banner_clickable">'; echo '<div id="top_banner_wrapper">'; echo '<object width="400" height="60">'; echo '<param name="wmode" value="transparent">'; echo '<embed wmode="transparent" src="'.$banners[$rand].'" '; echo 'width="400" height="60" type="application/x-shockwave-flash"'; echo 'pluginspage="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash" />'; echo '</object>'; echo '</div>'; echo '</div>'; And the related jQuery code is like this: /* master.js */ $(document).ready(function() { $("#top_banner_clickable").click(function() { window.location ="http://ausdcf.org/campaign/"; }); }); I absolutely know nothing about Flash or embedded objects. I guess that's the cause of this problem. Plus, I don't know why it works with some browsers but not all... I even tried to add a z-index to the wrapper div in css like this: #top_banner_clickable { z-index : 100; } No this wouldn't do, either... Is there a way to go around this issue? Many thanks in advance.

  Read the article

• c++ quick sort running time

  - by chnet

  I have a question about quick sort algorithm. I implement quick sort algorithm and play it. The elements in initial unsorted array are random numbers chosen from certain range. I find the range of random number effects the running time. For example, the running time for 1, 000, 000 random number chosen from the range (1 - 2000) takes 40 seconds. While it takes 9 seconds if the 1,000,000 number chosen from the range (1 - 10,000). But I do not know how to explain it. In class, we talk about the pivot value can effect the depth of recursion tree. For my implementation, the last value of the array is chosen as pivot value. I do not use randomized scheme to select pivot value. int partition( vector<int> &vec, int p, int r) { int x = vec[r]; int i = (p-1); int j = p; while(1) { if (vec[j] <= x){ i = (i+1); int temp = vec[j]; vec[j] = vec[i]; vec[i] = temp; } j=j+1; if (j==r) break; } int temp = vec[i+1]; vec[i+1] = vec[r]; vec[r] = temp; return i+1; } void quicksort ( vector<int> &vec, int p, int r) { if (p<r){ int q = partition(vec, p, r); quicksort(vec, p, q-1); quicksort(vec, q+1, r); } } void random_generator(int num, int * array) { srand((unsigned)time(0)); int random_integer; for(int index=0; index< num; index++){ random_integer = (rand()%10000)+1; *(array+index) = random_integer; } } int main() { int array_size = 1000000; int input_array[array_size]; random_generator(array_size, input_array); vector<int> vec(input_array, input_array+array_size); clock_t t1, t2; t1 = clock(); quicksort(vec, 0, (array_size - 1)); // call quick sort int length = vec.size(); t2 = clock(); float diff = ((float)t2 - (float)t1); cout << diff << endl; cout << diff/CLOCKS_PER_SEC <<endl; }

  Read the article

• Composite Views and View Controllers

  - by BillyK

  Hi, I'm somewhat new to Android and am in the process of designing an application with a couple fairly complex views. One of the views is intended to involve a complex view displaying information associated with model objects and segregated into several different views; the navigation of which is meant to be achieved using sliding effects (i.e. sliding one's finger across the screen to traverse from one screen to the next, etc). The view itself will be used to host multiple sets of views for varying types of model objects, but with a general structure that is reused between them all. As a rough example, the view might come up to display information about a person (the model object), displaying several details views: a view for general information, a view displaying a list of hobbies, and a view displaying a list of other individuals associated with their social network. The same general view, when given a model object representing a particular car would give several different views: A general view with details, A view containing photo images for that vehicle, a view representing locations which it could be purchased from, and a view providing a list of related cars. (NOTE: This is not the real data involved, but is representative of the general intent for the view). The subviews will NOT cover the entire screen real-estate and other features within the view should be both visible and able to be interacted with by the user. The idea here is that there is a general view structure that is reusable and which will manage a set of subviews dynamically generated based upon the type of model object handed to the view. I'm trying to determine the appropriate way to leverage the Android framework in order to best achieve this without violating the integrity of the framework. Basically, I'm trying to determine how to componentize this larger view into reusable units (i.e. general view, model-specific sub-view controllers, and individual detail views). To be more specific, I'm trying to determine if this view is best designed as a composite of several custom View classes or a composite of several Activity classes. I've seen several examples of custom composite views, but they typically are used to compose simple views without complex controllers and without attention to the general Activity lifecycle (i.e. storing and retrieving data related to the model objects, as appropriate). On the other hand, the only real example I've seen regarding a view comprised of a composite of Activities is the TabActivity itself, and that isn't customizable in the fashion that would be necessary for this. Does anyone have any suggestions as to the appropriate way to structure my view to achieve the application framework I'm looking for? Views? Activities? Something else? Any guidance would be appreciated. Thanks in advance.

  Read the article

• XmlHttpRequest bug?

  - by valdo

  Hello all. I'm writing a program that among other things needs to download a file given its URL. I'm too lazy to implement the Http/Https protocols manually, so that I needed some library/object/function that'll do the job. Critical requirement: The download must be asynchronous. That is, the thread that issued the download must be able to do something else "while" downloading the file, plus the download must be able to be aborted anytime without any barbaric side effects (such as internal call to TerminateThread). Nice-to-have requirements: Should be able to download the file "into memory". Means - read the contents of the file as they arrive, not necessarily save it into some "file system" file. It'd be nice to have some convenient Win32 progress notification mechanism (waitable event, semahpore, completion port, etc.), rather than just periodically polling the download status. I've chosen the XmlHttpRequest COM object to do the work. It seemed to work fine enough, plus it supported asynchronous mode. However I noticed that after some period it just stops working. That is, after several successful file downloads it stops downloading anything. I periodically poll it to get its status, it reports "in-progress", but nothing actually happens, and there's no network activity. Moreover, when the same process creates another instance of XmlHttpRequest object to perform new downloads - the effect is the same. The object reports "in progress", whereas it doesn't even try to connect to the server (according to network sniffers and system TCP state). The only way to make this object work back is to restart the process. This makes me suspect that there's a sort of a bug (sorry, I meant undocumented feature) in the object. Also it's not a bug at the level of an individual object, since the problem persists when the object is destroyed and another one is created. It's probably some global state of the DLL that implements this object. Does anyone know something about this? Is this a known bug? I'm pretty sure there's no chance that I have another bug in my code, because of which it seems to me to be the bug is in the XmlHttpRequest. I've done enoughtests and spent time with the debugger to conclude without reasonable doubt that it's just the object stops working. BTW, while the object should work, I do all the waiting via MsgWaitXXXX API calls. So that if this object needs the message loop to work properly (for instance, it may create a hidden notification window and bind it to a socket via WSAAsyncSelect) - I give it the opportunity.

  Read the article

• php paypal ipn membership error

  - by aleksander haugas

  hello I integrated the membership subscription in the website, but I fail to insert data to the database. checking out all the function I make a txt file with php with data and generates me correctly. but I can not verify any data and less insert. <?php // read the post from PayPal system and add 'cmd' $req = 'cmd=_notify-validate'; foreach ($_POST as $key => $value) { $value = urlencode(stripslashes($value)); $req .= "&$key=$value"; } // Post back to PayPal system to validate $header .= "POST /cgi-bin/webscr HTTP/1.0\r\n"; $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; $header .= "Content-Length: " . strlen($req) . "\r\n\r\n"; $fp = fsockopen ('ssl://www.paypal.com', 443, $errno, $errstr, 30); // Assign posted variables to local variables $item_name = $_POST['item_name']; $item_number = $_POST['item_number']; $payment_status = $_POST['payment_status']; $payment_amount = $_POST['mc_gross']; $payment_currency = $_POST['mc_currency']; $txn_id = $_POST['txn_id']; $receiver_email = $_POST['receiver_email']; $payer_email = $_POST['payer_email']; $user_id = $_POST['custom']; //Here i make the txt file and it works correctly //but after this does not work or make a txt file //Insert and update data if (!$fp) { // HTTP ERROR } else { fputs ($fp, $header . $req); while (!feof($fp)) { $res = fgets ($fp, 1024); if (strcmp ($res, "VERIFIED") == 0) { //Verificamos el estado del pedido if ($payment_status == 'Completed') { $txn_id_check = mysql_query("SELECT Transaction_ID FROM ".$db_table_prefix."Users_Payments WHERE Transaction_ID='".$txn_id."'"); if (mysql_num_rows($txn_id_check) !=1) { //Si el pago se ha realizado al dueño especificado y coincide con el dueño if ($receiver_email == $website_Payment_Email) { //Tipo de cuenta segun pagado if ($payment_amount == '10.00' && $payment_currency == 'EUR') { //add txn_id to database $log_query = mysql_query("INSERT INTO `".$db_table_prefix."Users_Payments` VALUES ('','".$txn_id."','".$payer_email."')"); //update premium to 3 $update_premium = mysql_query("UPDATE ".$db_table_prefix."Users SET Group_ID='3' WHERE User_ID='".$user_id."'"); } } } } } else if (strcmp ($res, "INVALID") == 0) { // log for manual investigation } } fclose ($fp); } ?> I call this file with require_once () with the connection to the database any ideas? thanks

  Read the article

• How can I prevent external MSBuild files from being cached (by Visual Studio) during a project build

  - by Damian Powell

  I have a project in my solution which started life as a C# library project. It's got nothing of any interest in it in terms of code, it is merely used as a dependency in the other projects in my solution in order to ensure that it is built first. One of the side-effects of building this project is that a shared AssemblyInfo.cs is created which contains the version number in use by the other projects. I have done this by adding the following to the .csproj file: <ItemGroup> <None Include="Properties\AssemblyInfo.Shared.cs.in" /> <Compile Include="Properties\AssemblyInfo.Shared.cs" /> <None Include="VersionInfo.targets" /> </ItemGroup> <Import Project="$(ProjectDir)VersionInfo.targets" /> <Target Name="BeforeBuild" DependsOnTargets="UpdateSharedAssemblyInfo" /> The referenced file, VersionInfo.targets, contains the following: <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <!-- Some properties defining tool locations and the name of the AssemblyInfo.Shared.cs.in file etc. --> </PropertyGroup> <Target Name="UpdateSharedAssemblyInfo"> <!-- Uses the Exec task to run one of the tools to generate AssemblyInfo.Shared.cs based on the location of AssemblyInfo.Shared.cs.in and some of the other properties. --> </Target> </Project> The contents of the VersionInfo.targets file could simply be embedded within the .csproj file but it is external because I am trying to turn all of this into a project template. I want the users of the template to be able to add the new project to the solution, edit the VersionInfo.targets file, and run the build. The problem is that modifying and saving the VersionInfo.targets file and rebuilding the solution has no effect - the project file uses the values from the .targets file as they were when the project was opened. Even unloading and reloading the project has no effect. In order to get the new values, I need to close Visual Studio and reopen it (or reload the solution). How can I set this up so that the configuration is external to the .csproj file and not cached between builds?

  Read the article

• LinearLayout as custom button, OnClickListener never called

  - by ohra

  I've been using the common Android Button with both icon (drawableTop) and text. It works really poorly if you want to have a non-standard size button, so I decided to make a custom button with a LinearLayout having the following layout: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" style="@style/ButtonHoloDark" android:layout_width="fill_parent" android:layout_height="fill_parent" android:gravity="center" android:clickable="true" android:focusable="true" android:orientation="vertical" > <ImageView android:id="@+id/buttonIcon" android:layout_width="fill_parent" android:layout_height="wrap_content" android:duplicateParentState="true" /> <TextView android:id="@+id/buttonText" android:layout_width="fill_parent" android:layout_height="wrap_content" android:duplicateParentState="true" android:gravity="center" android:textColor="@color/white" /> </LinearLayout> The layout is used by a custom class: public class CustomIconButton extends LinearLayout { public CustomIconButton(Context context, AttributeSet attrs) { super(context, attrs); setAttributes(context, attrs); LayoutInflater.from(context).inflate(R.layout.custom_icon_button, this, true); } ... But when I set an OnClickListener on my button in its parent layout it never gets called. I can only receive clicks if a set the listener to the ImageView and/or TextView. This leads to two possible effects when the button is clicked: The click is inside the ImageView or the TextView. The click is registered ok, but the buttons state drawable doesn't change i.e. it doesn't appear depressed. The click is inside the "empty area" of the button. The click is not registered, but the state drawable works ok. Neither of these is feasible. I've played around with the following attributes on the LinearLayout or its children, but none really seem to have any effect whether true or false: duplicateParentState clickable focusable There doesn't seem to be any reasonable way to get the LinearLayout parent receive clicks instead of its children. I've seen some possible solutions overriding dispatchTouchEvent or onInterceptTouchEvent on the custom component itself, but that really seems like a big mess if I have to start analyzing touch events to identify proper clicks. So OnClickListener on a LinearLayout with children = no go?

  Read the article

• Sandbox "Sorry — your last action could not be completed"

  - by aron

  My site was working fine with PayPal's sandbox, and then all of a sudden it stopped. Now I get the wonderful error Sandbox "Sorry — your last action could not be completed" This is my HTML: <body onload="document.Paypal.submit();"> <!-- item_number should get passed back --> <form name="Paypal" method="post" action="https://www.sandbox.paypal.com cgi-bin/webscr" id="Paypal"> <div> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKLTkyNTEyNzc0NGRk0LKGvSMTla6LgHpbOsdk7iC0iXE=" /> </div> <div> <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWCALKhatPArLPtrsEAreImG4CweeH+AkCgMPhowcC+NaM4gQC+Y2VqwoCouzSnwEVXI9UvQxqI2UcdQ4SmcSWqfEZNw==" /> </div> <input type="hidden" name="cmd" value="_cart" /> <input type="hidden" name="upload" value="1" /> <!-- The following is for itemized PayPal data instead of the aggregated version --> <input type="hidden" name="item_name_1" value="LEADING SKILLS 4/10/2012 6:00 PM Section: Members " /> <input type="hidden" name="amount_1" value="250.00" /> <input type="hidden" name="quantity_1" value="2" /> <input type="hidden" name="handling_cart" value="7.00" /> <input type="hidden" name="tax_cart" value="35.00" /> <!-- STANDARD DATA --> <input name="business" type="hidden" id="business" value="[email protected]" /> <input name="invoice" type="hidden" id="invoice" value="TS-1E8B59A0-B" /> <input type="hidden" name="no_note" value="0" /> <input name="currency_code" type="hidden" id="currency_code" value="USD" /> <input name="shipCountry" type="hidden" id="shipCountry" /> <input type="hidden" name="return" value="http://rockclimbing.venueblue.com/Gateway/paypal/Complete.aspx?id=db86c0bf-beb8-4e37-b495-bed1d3e7e6f3" /> <input name="cancel_returnUrl" type="hidden" id="cancel_returnUrl" value="http://rockclimbing.venueblue.com/ShoppingCart.aspx" /> <input type="hidden" name="cn" value="How did you hear about us?" /> <input name="custom" type="hidden" id="custom" value="db86c0bf-beb8-4e37-b495-bed1d3e7e6f3" /> <input name="notify_url" type="hidden" id="notify_url" value="http://rockclimbing.venueblue.com/Gateway/Paypal/IPN.aspx" /> <input type="submit" value="Submit Payment Info" style="display:none;" /> Processing Order.... </form> </body> Anyone have a clue what happened?

  Read the article

• WPF: Improving Performance for Running on Older PCs

  - by Phil Sandler

  So, I'm building a WPF app and did a test deployment today, and found that it performed pretty poorly. I was surprised, as we are really not doing much in the way of visual effects or animations. I deployed on two machines: the fastest and the slowest that will need to run the application (the slowest PC has an Intel Celeron 1.80GHz with 2GB RAM). The application ran pretty well on the faster machine, but was choppy on the slower machine. And when I say "choppy", I mean the cursor jumped even just passing it over any open window of the app that had focus. I opened the Task Manager Performance window, and could see that the CPU usage jumped whenever the app had focus and the cursor was moving over it. If I gave focus to another (e.g. Excel), the CPU usage went back down after a second. This happened on both machines, but the choppiness was only noticeable on the slower machine. I had very limited time to tinker on the deployment machines, so didn't do a lot of detailed testing. The app runs fine on my development machine, but I also see the CPU spiking up to 10% there, just running the cursor over the window. I downloaded the WPF performance tool from MS and have been tinkering with it (on my dev machine). The docs say this about the "Frame Rate" metric in the Perforator tool: For applications without animation, this value should be near 0. The app is not doing any heavy animation, but the frame rate stays near 50 when the cursor is over any window. The screens I tested on have column headers in a grid that "highlight" and buttons that change color and appearance when scrolled over. Even moving the mouse on blank areas of the windows cause the same Frame rate and CPU usage (doesn't seem to be related to these minor animations). (Also, I am unable to figure out how to get anything but the two default tools--Perforator and Visual Profiler--installed into the WPF performance tool. That is probably a separate question). I also have Redgate's profiling tool, but I'm not sure if that can shed any light on rendering performance. So, I realize this is not an easy thing to troubleshoot without specifics or sample code (which I can't post). My questions are: What are some general things to look for (or avoid) in the code to improve performance? What steps can I take using the WPF performance tool to narrow down the problem? Is the PC spec listed above (Intel Celeron 1.80GHz with 2GB RAM) too slow to be running even vanilla WPF applications?

  Read the article

• Modify audio pitch of recorded clip (m4v)

  - by devcube

  I'm writing an app in which I'm trying to change the pitch of the audio when I'm recording a movie (.m4v). Or by modifying the audio pitch of the movie afterwards. I want the end result to be a movie (.m4v) that has the original length (i.e. same visual as original) but with modified sound pitch, e.g. a "chipmunk voice". A realtime conversion is to prefer if possible. I've read alot about changing audio pitch in iOS but most examples focus on playback, i.e. playing the sound with a different pitch. In my app I'm recording a movie (.m4v / AVFileTypeQuickTimeMovie) and saving it using standard AVAssetWriter. When saving the movie I have access to the following elements where I've tried to manipulate the audio (e.g. modify the pitch): audio buffer (CMSampleBufferRef) audio input writer (AVAssetWriterAudioInput) audio input writer options (e.g. AVNumberOfChannelsKey, AVSampleRateKey, AVChannelLayoutKey) asset writer (AVAssetWriter) I've tried to hook into the above objects to modify the audio pitch, but without success. I've also tried with Dirac as described here: Real Time Pitch Change In iPhone Using Dirac And OpenAL with AL_PITCH as described here: Piping output from OpenAL into a buffer And the "BASS" library from un4seen: Change Pitch/Tempo In Realtime I haven't found success with any of the above libs, most likely because I don't really know how to use them, and where to hook them into the audio saving code. There seems to be alot of librarys that have similar effects but focuses on playback or custom recording code. I want to manipulate the audio stream I've already got (AVAssetWriterAudioInput) or modify the saved movie clip (.m4v). I want the video to be unmodifed visually, i.e. played at the same speed. But I want the audio to go faster (like a chipmunk) or slower (like a ... monster? :)). Do you have any suggestions how I can modify the pitch in either real time (when recording the movie) or afterwards by converting the entire movie (.m4v file)? Should I look further into Dirac, OpenAL, SoundTouch, BASS or some other library? I want to be able to share the movie to others with modified audio, that's the reason I can't rely on modifying the pitch for playback only. Any help is appreciated, thanks!

  Read the article

• Where are the function literals in c++?

  - by academicRobot

  First of all, maybe literals is not the right term for this concept, but its the closest I could think of (not literals in the sense of functions as first class citizens). The idea is that when you make a conventional function call, it compiles to something like this: callq <immediate address> But if you make a function call using a function pointer, it compiles to something like this: mov <memory location>,%rax callq *%rax Which is all well and good. However, what if I'm writing a template library that requires a callback of some sort with a specified argument list and the user of the library is expected to know what function they want to call at compile time? Then I would like to write my template to accept a function literal as a template parameter. So, similar to template <int int_literal> struct my_template {...};` I'd like to write template <func_literal_t func_literal> struct my_template {...}; and have calls to func_literal within my_template compile to callq <immediate address>. Is there a facility in C++ for this, or a work around to achieve the same effect? If not, why not (e.g. some cataclysmic side effects)? How about C++0x or another language? Solutions that are not portable are fine. Solutions that include the use of member function pointers would be ideal. I'm not particularly interested in being told "You are a <socially unacceptable term for a person of low IQ>, just use function pointers/functors." This is a curiosity based question, and it seems that it might be useful in some (albeit limited) applications. It seems like this should be possible since function names are just placeholders for a (relative) memory address, so why not allow more liberal use (e.g. aliasing) of this placeholder. p.s. I use function pointers and functions objects all the the time and they are great. But this post got me thinking about the don't pay for what you don't use principle in relation to function calls, and it seems like forcing the use of function pointers or similar facility when the function is known at compile time is a violation of this principle, though a small one.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >