Search Results

Search found 5572 results on 223 pages for 'cpu'.

Page 113/223 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Lens showing only music after zeitgeist removal

  - by chris

  I can't get anything to show up in the Dash (lens?) other than music (no applications , no files) . This began when I removed zeitgeist. I've uninstalled and reinstalled, but still not working. I've also installed unity-place-files and unity-place-applications as suggested elsewhere. Under processes that are running I don't see zeitgeist.. (the original reason I wiped it out was because it was sucking up CPU). Ubuntu 12.04 Thanks in advance.

  Read the article

• is there a bug with restart in edubuntu 12.04

  - by Ket

  After a clean install of edubuntu 12.04 on an Acer AO531-h netbook, restart doesn't work. The process starts normally but just before it shuts down the netbook freezes and I have to force shut down. The command "sudo reboot" has the same problem. I have no issues with shut down, only with restart. I'm absolute beginner. Netbook specs: Acer, intel atom CPU N270 @1.60GHz, 1.05 GHz 0.98GB RAM Dual booting with windows xp. No problems with windows.

  Read the article

• Parallel.For Inconsistency results

  - by ni Gue ???

  I am using VB.net to write a parallel based code. I use Parallel.For to generate pairs of 500 objects or in combination C(500,2) such as the following code; but I found that it didn't always generate all combinations which should be 124750 (shown from variable Counter). No other thread was runing when this code was run. I am using a Win-7 32 Bit desktop with Intel Core i5 CPU [email protected], 3.33 GHz and RAM 2GB. What's wrong with the code and how to solve this problem? Thank You. Dim Counter As Integer = 0 Parallel.For(0, 499, Sub(i) For j As Integer = i + 1 To 499 Counter += 1 Console.Write(i & ":" & j) Next End Sub) Console.Writeline("Iteration number: " & Counter)

  Read the article

• Developing a computer system based on Nand2Tetris [on hold]

  - by Ryan

  I recently finished a book called Nand2Tetris (nand2tetris.org) where I built my own computer system from scratch with its own machine language, assembly code, and a high level language called Jack that's translated to Hack binary. However, I feel like the "computer" I built throughout the course of this book (called the Hack computer) is a bit too simple for various reasons: 1) There are only two registers (D and A), whereas most computers have much more 2) Peripheral devices like mouse and keyboard have to be directly implemented 3) Peripheral devices use a pre-planned shared memory map to communicate with the CPU instead of using interrupts (which aren't covered at all) 4) Jack (the high level language) code doesn't compile to Assembly code directly, instead it compiles to an intermediate language, which in turn gets translated to Assembly. 5) There is no ROM or permanent storage device, everything is stored in RAM 6) No support for colored monitor, networking or sound I would like to build a more complicated computer system now based on what I've learned from Nand2Tetris. Does anyone know of any good resources or books to get started on this? (BTW by computer system I mean software that can emulate the hardware of a virtual computer with its own unique instruction set)

  Read the article

• Benchmarks Using Oracle Solaris 11

  - by Brian

  The following is a list of links to recent benchmarks which used Oracle Solaris 11. Oracle TimesTen In-Memory Database Performance on SPARC T4-2 World Record Performance on PeopleSoft Enterprise Financials Benchmark on SPARC T4-2 SPARC T4 Servers Running Oracle Solaris 11 and Oracle RAC Deliver World Record on PeopleSoft HRMS 9.1 SPEC CPU2006 Results on Oracle's Sun x86 Servers SPARC T4-4 Beats 8-CPU IBM POWER7 on TPC-H @3000GB Benchmark SPARC T4-2 Delivers World Record SPECjvm2008 Result with Oracle Solaris 11 SPARC T4-2 Server Beats Intel (Westmere AES-NI) on ZFS Encryption Tests SPARC T4 Processor Beats Intel (Westmere AES-NI) on AES Encryption Tests SPARC T4 Processor Outperforms IBM POWER7 and Intel (Westmere AES-NI) on OpenSSL AES Encryption Test SPARC T4-1 Server Outperforms Intel (Westmere AES-NI) on IPsec Encryption Tests SPARC T4-2 Server Beats Intel (Westmere AES-NI) on SSL Network Tests SPARC T4-2 Server Beats Intel (Westmere AES-NI) on Oracle Database Tablespace Encryption Queries

  Read the article

• Ikoula propose 1000 nouveaux serveurs virtuels dédiés Flex'Servers gratuits pendant un mois à l'occasion des TechDays

  Ikoula propose 1000 nouveaux serveurs virtuels dédiés Flex'Servers gratuits Pendant un mois à l'occasion des TechDays Ikoula avait déjà lancé une promotion sur son offre Flex'Server en proposant 500 seveurs gratuits. Aujourd'hui, l'entreprise renouvelle son opération à l'occasion des TechDays et relance son offre. Elle comprend désormais de nouvelles ressources à prix privilégié. Quatre configurations sont disponibles : de ½ à 4 CPU, de 256 Mo à 2 Go de RAM, et de 10 à 80 Go de disque dur. A l'occasion des TechDays, 1 000 Flex'Servers sont offerts pendant un mois. Après le premier mois, ces serveurs dédiés virtuels sont facturés à partir de 5.99€ HT/moi...

  Read the article

• Can't install lib32ncurses5-dev or ia32-libs

  - by tito_drum

  I'm trying to install Android source and I keep getting this error. I kept with the installation but seems these packages are sort of required to have a complete and successful installation. this is my error Package lib32ncurses5-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source Package ia32-libs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'lib32ncurses5-dev' has no installation candidate E: Package 'ia32-libs' has no installation candidate E: Unable to locate package lib32readline5-dev E: Unable to locate package lib32z-dev I have a VM with Ubuntu on Intel® Core™ i5-2300 CPU @ 2.80GHz and 32-bit system

  Read the article

• Loud fans despite cool system under Linux (but not Windows)

  - by Sman789

  My new desktop computer runs almost silently under Windows, but the fans seem to run on a constantly high setting under Linux. Psensor shows that the GPU (with NVidia drivers) is thirty-something degrees and the CPU is about the same, so it's not just down to Linux somehow being more processor-intensive. I've read that the BIOS controls the fans under Linux, which makes sense given the high fan speeds when in BIOS as well. It's under Windows, when the ASUS AI Suite 3 software seems to take control, that the system runs more quietly and only speeds the fans up when required. So is there a Linux app which offers a similar dynamic control of the fans, or a setting hidden somewhere in the ASUS BIOS which allows the same but regardless of the OS? EDIT - I've tried using lm-sensors and fancontrol, but pwmconfig tells me "There are no pwm-capable sensor modules installed". This is after the sensors-detect command does find an 'Intel digital thermal sensor', and despite the sensors working fine in apps like psensor. Help getting this to work would likely solve the problem.

  Read the article

• Fan very loud in Ubuntu 12.10

  - by Jon

  I recently installed 12.10 on my Desktop PC, moving away from Windows 7. For some reason, the fan in my computer is making an enormous amount of noise (it is running at full speed constantly). Under Windows 7, the fan would slow itself down and run at an acceptable noise level. Now, it is nearly unbearable. Checked the processes, and none are taking up a huge load on the CPU. Please help as I really can't endure this noise, and I do not want to go back to Windows 7 on this box. Some specs: - Intel 2.26 duo core - ATI 4870 - 4GB - 650W power supply

  Read the article

• Java is very slow on my laptop

  - by Ryan McClure

  I have 1.6.0_30 JRE on my 11.10 install. I have 3 GB of RAM and an Intel Core2 Duo CPU T6600 @ 2.20GHz × 2. Whenever I use my Java to play a game, the Java runs at about 4-5 FPS. When I used Windows, I found that I could get around 40 FPS. I'm not too terribly worried about this, but are there settings that I can tweak that I don't know about? If not, why is it that JRE Java can't do as much on Ubuntu as it can on Windows? Also, this may be related but I'm not too sure--My fan runs very fast when running a Java application. Is there a correlation?

  Read the article

• Firefox 4 : sortie de la beta 12, améliorations du support du Flash et de l'accélération matérielle

  Firefox 4 : sortie de la beta 12 Améliorations du support du Flash et de l'accélération matérielle Mise à jour du 28/02/11 La douzième ? et a priori dernière - beta de Firefox 4 est sortie ce week-end. Elle corrige 7.000 bugs et apporte une amélioration dans la lecture des vidéos (en Flash). L'intégration de l'accélération matérielle (allouer des tâches spécifiques de calcul au GPU plutôt qu'au CPU) a elle aussi été retravaillée. Le tout permettant une meilleure stabilité du navigateur. Elle n'inclut malheureusement pas encore les patchs « miracles*» qui permettent de diviser par deux son temps de démarrage (lire par ail...

  Read the article

• How to make bash script run with a latency (i.e. wait 1 sec at each iterations)?

  - by user2413

  I have this bash script; for (( i = 1 ; i <= 160 ; i++ )); do qsub myccomputations"${i}".pbs done Basically, I would prefer if there was a 1 second delay between each iteration. The reason is that at each iterations, it sends the program file mycomputation"${i}$.pbs to a core node for solving. Solving in this instance involves the use of pseudo random numbers. I suspect the RNG I use (R's) uses CPU time as seed because as things are now I get repeating pseudo random numbers (at the rate of approx 1 out of 100). So how to you ask bash to for (( i = 1 ; i <= 160 ; i++ )); do wait 1 sec qsub myccomputations"${i}".pbs done

  Read the article

• Toshiba Satellite a300 with Maverick keeps crashing.

  - by Martin

  I just installed 10.10 on my girlfriends Toshiba Satellite a300 and for about two days it has been working just fine for two days but today it started acting pretty wonky. Several times over the machine just dies as if it didn't have a battery and someone yanked out the power supply. After such a crash I'll have to wait a while before powering it up again or it will die before it even reaches the startup screen. It sort of seems like it's reacting to something I do. I kept it on for several hours while we were out of the house and it was still fine when I came back. I haven't been doing anything I can imagine is especially CPU-intensive when the crashes occur, but I have been trying to set up her iPod with Rythmbox and / or Banshee. If anyone can point me in the right direction I'd be very grateful.

  Read the article

• How to document and teach others "optimized beyond recognition" computationally intensive code?

  - by rwong

  Occasionally there is the 1% of code that is computationally intensive enough that needs the heaviest kind of low-level optimization. Examples are video processing, image processing, and all kinds of signal processing, in general. The goals are to document, and to teach the optimization techniques, so that the code does not become unmaintainable and prone to removal by newer developers. (*) (*) Notwithstanding the possibility that the particular optimization is completely useless in some unforeseeable future CPUs, such that the code will be deleted anyway. Considering that software offerings (commercial or open-source) retain their competitive advantage by having the fastest code and making use of the newest CPU architecture, software writers often need to tweak their code to make it run faster while getting the same output for a certain task, whlist tolerating a small amount of rounding errors. Typically, a software writer can keep many versions of a function as a documentation of each optimization / algorithm rewrite that takes place. How does one make these versions available for others to study their optimization techniques?

  Read the article

• Graphic card for parallel programming vs traditional methods

  - by Sambatyon

  With a simple search in amazon one can see that the modern approach for parallel programming is to use your graphic card. However I am still a little bit skeptical about it. My last computer has an 8 core CPU which I need is enough for basic all my parallel needs, if I need more I will probably use MPI through a network using my old machines. All in all, Why and/or when should I use CUDA or another method which uses my graphic card instead of traditional methods like pthreads, java threads, boost threads or the new C++ 11 threads? What about using processes?

  Read the article

• Installing Ubuntu Server 11.04

  - by Jackson Walters

  Trying to install Ubuntu Server 11.04 on an 64-bit AMD machine. The install goes fine until after "Loading additional components", then I get a blank purple screen with a responsive cursor at the bottom. I've looked everywhere and can't find anything (all the documentation seems to be on the desktop version). I have a wireless card installed if that makes a difference, don't why it would. This happens regardless of whether nomodeset is set. Here's what it looks like (as described): Specs: CPU - 64-bit AMD Sempron 140 @ 2.7Ghz RAM - 1Gb DDR3 1333 HDD - WD 500Gb 7200RPM SATA 3.0Gb/s Mobo - Foxconn M61PMP-K Wireless Card - Rosewill RNX-G300LX

  Read the article

• Ubuntu 12.10 live-usb won't boot

  - by user109175

  I own an Aleutia "Tango" low power PC. It uses a Intel Atom CPU N2800 @1.86GHz processor. I know there are Linux issues with the "Cedar Trail" graphics on this hardware but I can happily run Ubuntu 12.04 using the VESA graphics driver. I wanted to try out Ubuntu 12.10 so I created a live USB under 12.04 but I am unable to get this to boot. It gets as far as the Grub screen but after that the monitor shuts down. I have tried the F6 "nomodeset" option but that doesn't make any difference. Does anyone have any knowledge of this problem? Thanks in advance.

  Read the article

• What is the ideal laptop for creative coding applications?

  - by Jason

  Hi, I am a creative coder using C++(cinder and OpenFrameworks) I am looking to upgrade from my MacBook, which slowed down to about 3fps this morning. My project involves particles systems and fluids reacting to audio analysis data and computer vision data in real-time. SD or HD? no biggie. I have asked many people what computer I need. Ideally, I want a MacBook Pro. But is that enough power? I've been told that I need a desktop for what I am doing though I'd rather stay portable I've been told that I should go PC linux to get the most power but I'd rather stay mac I've been told that RAM is more of bottleneck than processor speed I've been told that the Graphics Card is more important than CPU and that code optimizations such as using trees over lists, proper threading, sending tasks to the GPU make a bigger difference than the hardware!!! what's true?! what do I need? Any suggestions are greatly appreciated

  Read the article

• Ubuntu won't boot and it is stuck on the loading screen

  - by Jordan March

  I had just installed it as dual boot 2 days ago, and everything was fine. I was installing some programs (i think it was Play On Linux) and I don't think the install was 100% done when the battery died. Since then it won't boot into Ubuntu; it just stays at the loading screen. I did make separate partitions for boot root home and swap. Can anyone help me get it back and running again? Even if I have to reinstall it. I just don't want to go back through getting all those apps. I'm running Ubuntu 12.10 64bit on a Acer Aspire 5750 core i3 cpu 4gb ram

  Read the article

• What is the best language to use for building a fulfillment engine [on hold]

  - by John Stapleton

  I asked this on stack overflow and was suggested to move it here. I do understand it is a matter of opinion which is exactly what I aim to achieve here... I wanted to know what you think is the best language to write a fulfillment engine in? I cannot provide much detail but I am trying to build a control interface for servers and i wanted to build a program daemon that would process data on the authoritative server and the slave servers( the backbone of the network) with their own daemons running would check regularly(every 5 minutes or so) with the authoritative server and process the commands(securely) I am trying to build this with a minimal footprint(cpu and ram wise for the slaves, authoritative is going to be scalable) and to make it automated so that the user does not have to configure the daemon(installation is automated by the authoritative server) I am leaning away from my usual php set up for simplicity sake. Edit: I am not an expert in any particular language but flexible enough and willing to learn another.

  Read the article

• Ubuntu 11.10 momentarily freezes every couple minutes

  - by Jeff Welling

  I'm working on an Acer Aspire One D257 running Ubuntu 11.10, and every few minutes the laptop freezes up for a second or two, before becoming responsive again. This doesn't really present a huge problem, but when I'm trying to code all of a sudden vim stops responding for a couple seconds while I'm trying to modify my code, it's increasingly frustrating. The odd part is, if I play a movie in VLC at the same time, when vim pauses the video keeps playing just fine (VLC's priority is not modified). I'm wondering if anyone knows why this may be happening, or in lieu of that, how I might be able to track down the source of my frustrating pauses. Normally I would try using top, but the pauses are shorter than 2 seconds so nothing unusual shows up in top as consuming the CPU. Does anyone know how to troubleshoot intermittent repeating 1 second long pauses in vim?

  Read the article

• What are the factors that determine the default frequency of a shader call?

  - by user827992

  After i have been played for some days with various vertex and fragments shaders seems clear to me that this programs are called by the GPU at every and each rendering cycle, the problem is that I can't really quantify this frequency and I can't tell if is based on some default values or not because I don't have a big collection of hardware right now to do extensive tests. For what i know the answer could be really trivial like "it's the same of the refresh rate of your monitor", but i would like some good answers on that to be clear on this. For instance looks really odd to me that all the techniques used to control the amount of FPS that i have seen until now uses a call for the OpenGL function glutGet(GLUT_ELAPSED_TIME) to retrieve a value in ms about when the rendering started but I have to relies on the CPU to do the math. Why I can't set an FPS value in OpenGL if OpenGL clearly has a counter and a timer/clock? PS I'm referring to OpenGL 3.0+

  Read the article

• 12.10 live dvd no video input

  - by mark kirby

  Hi I have been trying install Ubuntu 12.10, but as soon as it gets past my bios and to the screen with the blinking line in the top left, I get a no video input message on my tv (like when you turn the tv on with nothing connected). I have used live dvd's of both betas, alphas and daily build all with exactly the same results. Has any one else had this ? Is there a fix ? Dose this mean I can never upgrade my Ubuntu again ? (12.04 works ive been using since beta) My pc ,while old, should run this fine CPU = 2x Intel P4 HT @ 3ghz GPU = Nvidia Geforce 310 via HDMI RAM = 2 Gb DDR 2 HDD = 2 x 7200 rpm SATA Please help me I use Ubuntu exclusively on my pc and would like to keep doings so.

  Read the article

• Trouble with 12.10 lag

  - by Brennan

  Well basicly lately I have been having lag problems with 12.10. I will post my specs, but before the update to 12.10, it said that I had intel graphics. Now it says I have Gallium. My specs: *Memory: 3.9 GiB *Processor: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz × 2 *Graphics: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits) (used to say intel graphics) *OS Type: 32-bit *Disk: 486.1 GB The output of the command sudo apt-cache check is this: E: Invalid operation check The output of the command sudo lspci -nnk | grep -A5 VGA is this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:836d] Kernel driver in use: i915 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8445] Kernel driver in use: snd_hda_intel

  Read the article

• Beginner: How to Make Explorer Always Show the Full Path in Windows 8

  - by Taylor Gibb

  In older versions of Windows the Title Bar used to display your current location in the file system. In Windows 8 this is not the default behavior, however, you can enable it if you wish to. Display the Full Path in the Windows Explorer Title Bar Press the Windows + E keyboard combination to open Windows Explorer and then switch over to the View tab. On the right-hand side click on options and then select Change folder and search options from the drop-down. When the Folder Options dialog opens, switch over to the View options. Here you will need to tick the Display the full path in the title bar check box. That’s all there is to it. How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU HTG Explains: Is UPnP a Security Risk?

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >