Search Results

Search found 4229 results on 170 pages for 'intel pentium'.

Page 113/170 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Windows 7 won't boot from raid-1 disks until secondary non-bootable disks are removed

    - by PaulP
    I have an ASUS X58 motherboard with a Intel ICH10R southbridge raid controller. Bootable raid-1 SATA disks are on channels 4, 5. Secondary raid-1 SATA disks are on channels 0,1. Everything was working OK until one time I removed the secondary disks and booted successfully but after I shut down and reinstalled the secondary disks rebooting fails with a "Please insert proper boot item" error. If I remove the secondary disks and reboot then do a hot-install of the disks after booting completes, then all is OK. Do I have a raid setup problem or is it something I can fix with Disk Manager.

    Read the article

  • Setting up a Windows Server 2008 R2 DC + Fileserver : native or virtual?

    - by user126890
    I want to deploy a new DC + Fileserver using Windows Server 2008 R2 SP1 Standard Edition on a Dell PowerEdge R410 and iSCSI storage for a small business (~30 people). Should I install the system native on the server or use a virt layer? I don't have a budget for virtualization so i gotta go with something free... What's a better working routine, taking snapshots of vm's or taking backups (Acronis/CloneZilla) of systems? If I use a virt system, I need a GUI for some people in the business to reset the system to a earlier state in emergency situations. I wanted to install phpVirtualBox once but never finished, is it suitable in a productive environment? server specs: Intel Xeon E5620 CPU (2,40GHz, 4C, 12MB Cache) 8GB RAM Dual Rank LV RDIMMs 1333MHz 2x 1TB SATA 7,2K 3,5, RAID1

    Read the article

  • NIC interface names in /proc/interrupts

    - by Gallus
    When I look at /proc/interrupts: $ cat /proc/interrupts CPU0 CPU1 (...) 12: 4 0 IO-APIC-edge i8042 14: 145 65310875 IO-APIC-edge ide0 50: 0 0 IO-APIC-level uhci_hcd:usb5, Intel ICH7 58: 5388 7983508 IO-APIC-level libata 169: 812427252 1236572641 IO-APIC-level skge, eth1 217: 6 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 225: 0 0 IO-APIC-level uhci_hcd:usb3 233: 60 3108720778 IO-APIC-level uhci_hcd:usb4, skge I can see two skge and one eth1 entries. All of them are the network cards. Because of the general name "skge" (which is the name of the network driver of the card) I can't easily reocognize, which NIC occupies which interrupt. How to make linux use more descriptive names in the entries? Or: Is there any alternative way to obtain INT information instead of /proc/interrupt? My final goal is to manipulate smp_affinities of the NICs.

    Read the article

  • HDD vanished after wakeup from standby

    - by Sam
    In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

    Read the article

  • Is a "failed" RAID 5 disk really no good?

    - by GregH
    This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

    Read the article

  • Is 850W SMPS enough for the below Config?

    - by bali208
    We are planing to assemble a file server of the following configuration. 1) Intel S2400SC2 Motherboard. 2) Xeon 2407 Processor x 2 (Dual Processors) 3) 8gb x 8 ECC DDR3 RAM 4) One 2 TB Seagate HDD. 5) 8 cabinet fans fitted for NZXT Switch 810 Cabinet. Our question is is CoolerMaster 850 Watts power supply enough for our machine? Or we have to put 1050 Watts power Supply? Please suggest the best Brand and Wattage of SMPS we have to buy for our system. Thank you.

    Read the article

  • HFS for Windows by Paragon BSOD

    - by texmex5
    Installed HFS for Windows 7 yesterday. Did a reboot. Copied some files from my internal drive to external hfs drive. Did another reboot and rebooted to Mac. Mac worked fine. Then yesterday the battery went dead on my mac and the computer switched off. This morning tried to boot into windows but got a BSOD as soon as I moved my mouse in the login screen. BSOD refeers to an error with service HFSPLUS.SYS Now when I try to boot into mac (pressing alt while restarding) the mac drive isn's shown and I can only boot into Windows 7 Safe Mode. Cannot uninstall HFS for Windows the uninstaller in control panel says: "THE WINDOWS INSTALLER SERVICE COULD NOT BE ACCESSED. THIS CAN OCCUR WHEN WINDOWS INSTALLER IS NOT CORRECTLY INSTALLED". SETUP: Intel Core 2 Duo, P8600 @ 2.40GHZ, 4GB RAM, WINDOWS 7 ULTIMATE 32 BIT

    Read the article

  • How do I recover from a Linux CentOS 4.6 Operating System Crash

    - by Greg Omebije
    Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

    Read the article

  • Boot Vista x64 with both ICH8 and ICH10 AHCI support

    - by adurity
    I have a situation where I need to boot Windows Vista 64-bit from both a ICH10 and ICH8 AHCI SATA controller. Currently, it is setup to boot from the ICH10, but when I try booting with the ICH8, I get the famed Windows STOP 7B BSOD. How can I add the ICH8 driver so that I can work around this BSOD and boot the system? I have updated to the latest Intel AHCI driver (8.9.0.1023 as of this post) which is supposed to support both chipsets, but I feel I am missing something.

    Read the article

  • Mac OS X: network disabled because security breach

    - by fireeyedboy
    Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

    Read the article

  • Increase application performance on Amazon AWS

    - by Honus Wagner
    I've got a client with an MVC v1 (.NET) application running on a micro instance. On this instance, I've got .NET, IIS 7.5, and MS SQL Server 2008 running to handle the application. The client has reported that it is taking nearly 10 seconds to process each request. Even loading the initial login page takes about that long, then logging in takes that long, etc etc. The currently running instance specs are as follows: 615 MB RAM Intel Xenon CPU E5430 @ 2.66GHz 2.78 GHz 64-Bit Is the memory availability the issue? or is it the processing power? I forsee two options: Change to a larget instance Set up a 2-tier architecture with two micro instances Which of these will give the application better performance? Thanks in advance.

    Read the article

  • Does HP 8530w support Wifi 802.11n?

    - by FoxyBOA
    According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

    Read the article

  • Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

    - by Bob
    I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

    Read the article

  • I just ordered 70/10 internet service, and need a new router I think?

    - by data_jepp
    Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

    Read the article

  • I found two usb sticks on the ground. Now what?

    - by Stefano Borini
    As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

    Read the article

  • UEC - Can the Cluster Controller and Storage Controller be seperate systems?

    - by Jeremy Hajek
    My department is implementing an Ubuntu Enterprise Cloud. I have done the testing and am quite comfortable with the 4 pieces, CC/SC, CLC, WS, NC. Looking at various documents below it appears the the Storage Controller and Cluster Controller (eucalyptus-sc and eucalyptus-cc) are always installed on the same system. My question is this: can I install the storage controller and the cluster controller on separate systems? http://open.eucalyptus.com/wiki/EucalyptusAdvanced_v2.0 the picture indicates that cc and sc are two different machines http://www.canonical.com/sites/default/files/active/Whitepaper-UbuntuEnterpriseCloudArchitecture-v1.pdf P.10 1st paragraph uses the word "machine(s)" http://software.intel.com/file/31966 P. 8 indicates the same separate architecture BUT... https://help.ubuntu.com/community/UEC/PackageInstallSeparate indicates below that the SC and CC are to be on the same system.

    Read the article

  • PSU Suggestions for SLI EVGA GTX 680 + i7

    - by JMH
    So i am putting together a new machine and am trying to determine the best PSU to go with for this setup. Here is the build i am thinking about Processor Intel Core i7-3770K Ivy Bridge 3.5GHz Motherboard ASRock Z77 Professional Graphics Card (2 SLI) EVGA 02G-P4-2680-KR Sound Card HT | OMEGA eClaro 7.1 Fan/Heat Sync ZALMAN CNPS9500A-LED Case COOLER MASTER HAF X RC-942-KKN1 RAM G.SKILL Ripjaws X Series 32GB (4 x 8GB) SSD Of some Sort So my guess is that i need a 750 -1000W PSU, but which brand.... how much, etc --- really in the woods. Thanks -Josh

    Read the article

  • Disk Redundancy across different server

    - by Mascarpone
    I have 3 servers, all with the same specs: Intel CPU 8 GB RAM Linux or BSD Single 2TB desktop SATA with more than 10K Hours of operation, with only less than 300 GB Used My provider cannot install a second hard drive, but can guarantee me that the drive will be replaced immediately in case of failure, with another equally crappy drive. The likelihood of drive failure is high, and since I can't use RAID, I was thinking about keeping a back up of each machine on all the other machines, so that there are always 2 copies on 2 different drives, plus the original. I would synchronize the drives every hour, with rsync, to guarantee some sort of redundancy, since bandwidth inside the DC is free, so it would be much cheaper than offsite backup. (A daily offiste backup is kept anyhow). What do you think? Any suggestion?

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • How to compare speed of graphics cards in Windows desktop environment?

    - by Al Kepp
    I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

    Read the article

  • Anyone know of a good way to sell used servers?

    - by RandyMorris
    We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

    Read the article

  • Problem with Lenovo x200s Wifi under Ubutu Karmic

    - by oneself
    Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

    Read the article

  • How does one get rid of fishy behavior in Windows?

    - by Tom Wijsman
    After I had boot my computer this morning there suddenly flooded water from the top of the screen, after which some fishes dropped into it. Now I can barely see what I am doing because the water distorts the view. Sometimes the fish follow the cursor so I need to move it away or wait for the fish to mind their own business. This makes it very annoying to use my system. What have I tried? Reboot the system. This caused the water to deplete from the desktop. Upon reboot, the screen was refilled with water and fishes. Attach another monitor. Same problem, fills that monitor as well and gives me extra fish. Clicking the fish. Makes them turn direction. Right clicking the fish. Changes color of the fish, not really useful. I'm locked out of changing the background or screen saver settings. Hence, I had to post the lady below... Safe mode doesn't save me from the fishes. It does give me another background there, but I can't screenshot easily. Other user accounts experience this as well. The Guest account seems to experience more fish than the other accounts. Using HijackThis, OTL Timekeeper List, Syninternal Autoruns, RootKitRevealer, ShellExView and similar tools I can't seem to find any entries that could be it, the Sysinternals tools show everything as verified. I'm suspecting this to be a driver problem. Randomly removing drivers doesn't seem to alleviate the problem. When removing the Graphics Drivers, it makes my screen black. While that could be considered the solution, it's not what I want. Changing the time / date settings does also not seem to affect the fishes. Changing the time a few years in the future, I would have expected the fishes to be dead. But, the same fishes are still there... They simply won't die! Tried to get used to them. They are really bothering me, looks like they require food. I don't know how to give them food, but apparently they get it elsewhere during reboot... Tried to disable my mouse pointer and use the keyboard. This works, they now swim around more randomly. They do put their attention to huge changes on the screen, so I need to type slow. Or otherwise I can't see what I'm tying exactly. Hold my laptop upside down. This seems to affect the water and fishes, but the water stays in the screen. They seem super resistant against water sickness and confusion though... What does the problem look like? What do I need? A way to get rid of these fishes on my screen forever, they are really annoying me a lot and I'm about to crack the screen to see if that makes them escape. Do you have any idea why this problem is occurring? What are my considerations? Buying an USB fish tank could make the fish leave the screen, I am uncertain though whether the fish could leave the screen through the USB cable. Using the FISh (programming language) which seems to provide EXPRESSIVE POWER and EFFICIENT EXECUTION, I can however not find any examples on how to remove fish. What are my Specifications? I'm using a Sony Vaio Fishy laptop. Sony VAIO VGN-Fishy, VAIO. Processor: 1337 MHz, Intel Core 2 Duo, T5432, 1 MB, Intel PM965 Express, 667 MHz. Memory: 1024 MB, DDR2-SDRAM, 667 MHz, 2 x 1024 MB, 4 GB. Disk Drive: 50 GB, Serial ATA, 5400 RPM. Storage Media: Memory Stick™, Memory Stick PRO™. Display: 15.4 ", 1280 x 800 pixels, LCD. Video: GeForce 8400M GT, 128 MB. Optical Drive: DVD±R/RW DL, 24 x, 24 x, 24 x, 6 x, 4 x, 6 x, 4 x, 5 x, 5 x, 8 x, 8 x, 8 x, 8 x, 6 x, 6 x, 24 x, 24 x, 24 x, 16 x. Camera: 1.3 MP, 30 fps. Networking: 2.0+EDR. Keyboard: Touchpad, AZERTY. Operating System/Software: Windows Vista Home Premium. Security: Kensington. Weight & Dimensions: 98.8 oz (2800 g), 14 " (355.8 mm), 10 " (254.4 mm), 0.98 " (24.9 mm). Other features: 100 BASE-TX/10 BASE-T, 802.11a/b/g/n/Draft n, V92/V.90, fishes. Plz! Help me...

    Read the article

  • How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

    - by lexu
    I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

    Read the article

  • Can I use a Mac Mini as a web server and database server? What are the pros and cons?

    - by Christopher Altman
    We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >