Search Results

Search found 36498 results on 1460 pages for 'linux usb drive'.

Page 113/1460 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Why isn't my phone charging with some micro usb cables?

    - by Jacxel
    I ordered 3 microUSB cables over ebay. My phone was at about 50% battery and I wanted to use it as a hot spot for some browsing on my laptop, so I plugged it in, a charging icon appeared on the phone, my laptop showed it as a connected usb device and so I went about my business. About 30 minutes later I checked the phone and to my dismay saw 45% battery. But ahh, I thought, I have been putting the poor little thing under too much pressure, acting as a WiFi hotspot must drain the battery quicker than it can charge via usb, perhaps even using my laptops usb port wouldn't output enough power. Unscathed I continued on and when I was going to bed I plugged the usb cable into a mains adapter and switched everything battery consuming off and content, went to sleep. The next morning I was awoken by my phones alarm which got cut off unexpectedly. I attempted to unlock my phone which showed no more signs of life. Why isn't my phone charging with these new USB cables? For clarity: They transfer data with no problems The phone appears to be charging, showing all the signs and lights it normally would, the cable that came with the phone works as you would expect, so its not a fault with the phone, I think they slow the discharging of the phone, but I could be wrong. Are these just bad quality cables? Is there a way to fix this issue?

    Read the article

  • Address VMWare Fusion Linux guest by hostname?

    - by amrox
    I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

    Read the article

  • How to upgrade OS on Mac Mini with external USB Drive?

    - by David
    We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

    Read the article

  • How to remotely install Linux via SSH?

    - by netvope
    I need to remotely install Ubuntu Server 10.04 (x86) on a server currently running RHEL 3.4 (x86). I'll have to be very careful because no one can press the restart button for me if anything goes wrong. Have you ever remotely installed Linux? Which way would you recommend? Any advice for things to watch out? Update: Thanks for your help. I managed to "change the tires while driving"! The main components of my method are drawn from HOWTO - Install Debian Onto a Remote Linux System, grub legacy: Booting once-only, grub single boot and kernel panic reboot , and Ubuntu Community Documentation: InstallationFromKnoppix Here is the outline of what I did: Run debootstrap on an existing Ubuntu server Transfer the files to the swap partition of the RHEL 3.4 server Boot into tha swap partition (the debootstrap system) Transfer the files to the original root partition Boot into the new Ubuntu system and finish up the installation with tasksel, apt-get, etc I tested the method in a VM and then applied to the server. I was lucky enough that everything went smoothly :)

    Read the article

  • How do I make a USB stick from which to install different OS's?

    - by Hanno Fietz
    Recently, I have made a number of USB sticks to install OS's (several Linux flavors, BSD, Windows) from, on machines that didn't have CD drives. Now, I would prefer to not overwrite the install USB sticks all the time, since it's handy to have them, but neither do I want to pile up USB sticks that I only need every 6 months. It would be great to have a bootable USB stick that fires up some minimal system, lets you choose an ISO image and then reboots from there. How would I go about this? Do I use some minimal Linux? Is there some kind of modified / specialized boot loader? Can I set up GRUB to do this? Should I use virtualization?

    Read the article

  • Emails Generated From Our Linux Server are Blocked By Our Exchange Server (That Has Barracuda)

    - by Scott
    We have our company website hosted on a Linux machine. It is sending mail via postfix. The emails are working and being sent to all email clients like Gmail. However, we are not receiving the emails on our exchange server. When we look at the logs, we see that the connection is being refused, presumably by the exchange server. postfix/qmgr[11865]: DA6D42FF13: from=<[email protected]>, size=3166, nrcpt=1 (queue active) postfix/smtp[12474]: connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused postfix/smtp[12474]: DA6D42FF13: to=<[email protected]>, relay=none, delay=172915, delays=172914/0.03/0.07/0, dsn=4.4.1, status=deferred (connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused) We do run Barracuda. We cannot telnet from the linux machine to our mail server b/c we get the same message.

    Read the article

  • Linux (non-transparent) per-process hugepage accounting

    - by Dan Pritts
    I've recently converted some java apps to run with linux manually-configured hugepages. I've got about 10 tomcats running on a system and I am interested in knowing how much memory each one is using. I can get summary information out of /proc/meminfo as described in Linux Huge Pages Usage Accounting. But I can't find any tools that tell me about the actual per-process hugepage usage. I poked around in /proc/pid/numa_stat and found some interesting information that led me to this grossity: function pshugepage () { HUGEPAGECOUNT=0 for num in `grep 'anon_hugepage.*dirty=' /proc/$@/numa_maps | awk '{print $6}' | sed 's/dirty=//'` ; do HUGEPAGECOUNT=$((HUGEPAGECOUNT+num)) done echo process $@ using $HUGEPAGECOUNT huge pages } The numbers it gives me are plausible, but i'm far from confident this method is correct. Environment is a quad-CPU dell, 64GB ram, RHEL6.3, oracle jdk 1.7.x (current as of 20130728)

    Read the article

  • DDRescue on Windows or another options like DDRescue for Windows

    - by Frank Thornton
    I have a drive with failed sectors ect... I can't image it with Acronis as it hangs. I can't with Knoppiz it hangs. CHKDSK hangs. I want to use DDRescure but I don't have any Linux boxes running at the moment. I could do is in a VM but that seems like it would be slow and problematic? Are there any ways I can data recovery this disk from my Windows machine or is there an ideal way to work with DDRescue on Windows?

    Read the article

  • How to access USB stick content from VMWare running Ubuntu 10.10?

    - by JVerstry
    Hi, I am running Ubuntu 10.10 via VMWare under Windows 7. I have followed the procedure to install the USB stick. It is now connected to the host. However, I don't know how to access the content of the stick. My Google research indicates that this may be a mounting issue. I read somewhere that I should check /proc/bus/usb, but the usb directory does not exist in /proc/bus. Unfortunately, I am not a Linux expert at this. The ultimate issue I am trying to solve is the one describe here. I am trying to use vi to create ~/.vmware/config, but it is virtually impossible to use vi, since I don't have access to the arrow keys (chicken & egg problem). I have created the config file on my usb stick and want to copy it where it should be. Thanks!

    Read the article

  • Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

    - by Carl
    I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

    Read the article

  • Still no external sound after installing ubuntu 10.04

    - by Walter
    As suggested I upgraded. Same as before except now not even the speaker control in the application bar. Please help. Background: I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System Administration Hardware Drivers; the only driver listed is my graphics card. Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.

    Read the article

  • Linux software Raid 10 no superblock

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

    Read the article

  • What's the maximum size Windows 7 allows for ReadyBoost?

    - by ymasood
    I read somewhere the Windows 7 had removed the limit on ReadyBoost from 4GB and now allows an unlimited number of GBs. I would like to reconfirm this as a fact. At present, my Windows 7 RC 7100 allows me a maximum of 4GB on one of my 8GB flash drives (though I've tried to connect two at a time and use 4GB on one and 2GB on another). Thanks!

    Read the article

  • Install Rails on linux [migrated]

    - by Jseb
    I am trying to install Ruby on Rails. and i have followed the following link for the install https://www.digitalocean.com/community/articles/how-to-install-ruby-on-rails-on-ubuntu-12-04-lts-precise-pangolin-with-rvm. This link was helpful i was able to run it, and everything, however as soon has i restarted the computer i then go into my apps and run it again with rails s and this message occurs. The program 'rails' is currently not installed. You can install it by typing: sudo apt-get install rails But work before, what should i do, do i need to set the path of somesort?? I am not that great in linux so bear with me. I am using linux ubuntu 12.04 desktop and my user is john Thanks in advance

    Read the article

  • Triple (3) Monitors under Linux

    - by widgisoft
    I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

    Read the article

  • Couldn't start mysql service in linux

    - by Haseena
    Iam trying to install one version of mysql in a LINUX machine. The system contain already another version of mysql installation. I prefer manual installation. Copy the exctracted tarball into a location and create symbolic link to that. I wish to install my mysql version without affecting already installed mysql version in the system. I created mysqld as service. But It couldn't start. When Iam trying to start this mysqld process, it shows an error like: Starting MySQL............................................................ ......................................... ERROR! The server quit without updating PID file (/var/lib/mysql/Test.pid). Please help me, is any wrong with my installation??? I follow the below mentioned link for installion : http://code.openark.org/blog/mysql/manually-installing-multiple-mysql-instances-on-linux-howto Thanks in Advance

    Read the article

  • GUI session from Mac to Linux, over WAN

    - by kellogs
    Closest thing I could find here was this I am on Mac OS 10.5.6 with X server installed. This is the machine I am trying to get GUI session data onto. There is an Ubuntu 11.10 Linux on which I have installed an X server and GDM. This is the machine where the GUI session data should come from. Currently, I got to the point where Linux listenes on port TCP 6000 for its clients. 1 - how do I swap port 6000 for port 6767 ? 2 - how do I connect to 6767 from my Mac ? Thanks

    Read the article

  • Map ftp servers as network drives in Ubuntu Linux

    - by Carl
    Hi everybody! I'm a new Linux user, just switched over from Windows. I've got a couple FTP servers I connect to on a regular basis through sftp. I was wondering if there was a way to, as we say in windows, map them as network drives in Linux, so I can just copy stuff into a drive or folder and it will just map it to the server by ftp. That would be pretty cool. Anybody know how this would be possible, and how to do it? I Can't see to find anything in the literature. I'm running Ubuntu 9.04. Thanks!

    Read the article

  • Change Linux Console's Default Monitor

    - by Tim M
    Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

    Read the article

  • Autorun when USB stick is inserted

    - by user313724
    Hi, I'm trying to prompt users to run my installer, whenever they plug in my USB device. I'd like this to work on all (most?) Windows OSes. I have an autorun.inf file in the root dir of my USB key with these contents: [Autorun] ShellExecute=setup.exe Icon=setup.exe UseAutoplay=1 It doesn't seem to do very much at all. Well... it does change the icon properly, but nothing gets executed and the user doesn't get any prompts. I've tried it on both Windows 7 and Windows Server 2003. Any ideas?

    Read the article

  • linux + automated rsync command

    - by Diana
    my target is to copy /tmp/my_file from 10.10.10.1 to my Linux machine without login and password , I set the passwords file with the right password - secret123 so rsync should work , please advice why I get Permission denied. Remark - 10.10.10.1 address is linux machine version – red hat 5.3 rsync -WavH --password-file=/tmp/passwords --progress [email protected]:/tmp/my_file . Permission denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) more /tmp/passwords secret123 ls -ltr passwords -rwxr-xr-x 1 root root 10 Sep 12 17:32 passwords

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >