Search Results

Search found 2988 results on 120 pages for 'mike chip'.

Page 113/120 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Low FPS in some games, but hardware not fully used

    - by Mario De Schaepmeester
    I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

    Read the article

  • Wildcard DNS, VirtualHosts on apache2, 404 for unused subdomains

    - by niel
    On an Apache2 server linked to by a DNS that includes a wildcard entry, e.g. *.example.com, subdomains that are not defined as ServerNames in any VirtualHosts point to the first defined VirtualHost, in my example this is 000-default. My Question:How would one get unused subdomains (subdomains not used in any virtualhosts) to return a 404 error to the requesting client? This must preferably show in server logs as a 404 as well. I have looked into the following possibilities: Redirecting any invalid subdomain to the home page or some other page.The problem with this method is, when someone links to your site as this.company.sucks.example.com, the client will see your home page or in my case 000-default if I do not redirect. Thanks, to Mike for pointing this out. (regex for "suck", etc definately not an option) Let the default VirtualHost point to a non-existent directory.Apache does not like this one bit, warning with every reload. Beyond the warning, everything seems fine. This seems like a hack. Does this seem like a problem (however small) to anyone? Point the default VirtualHost to a folder where the index.php is forbidden, thus creating a 403 status code.This is confusing and makes things like the following overly complicated: Say, for example, you use a subdomain per user (a big reason to use wildcard DNS, apparently), and users have the ability to view each others profiles at username.example.com. This solution is confusing to the user and completely not what I want to do. My ideal sollution will let the user know there is nothing to view at the url he entered. Preferably with a 404 and an error log entry for the address entered (not some other address). Any help would be greatly appreciated!

    Read the article

  • Failed to bring up eth1 in a dual ips solution in ubuntu

    - by lxyu
    I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

    Read the article

  • Upgrading from SQL2000 database to SQL Express 2008 R2

    - by itwb
    Hi, We have a web application which uses a MSSQL 2000 backend database. We are currently paying a ridiculous amount for Shared Hosting, with the database costs alone costing us $150 per month (MSSQL 100mb extra space is $40 per month). Our database size is 896.38 MB I am looking at getting a Virtual Private Server and upgrading the database to a MSSQL2008 Express database. I am aware that the Express version is limited to a 10GB database (with R2), and is constrained to a single CPU. I have also been offered SQL Server 2008 Web Edition for $19/per month, but I cannot find many details on the difference between Express and Web. Any suggestions here? What I would also like to know is: If we upgrade the database to MSSQL 2008 database, is there any issues with possible data transformations in the future? I.e. Is it possible to download and mount it with SQL Server 2008 Standard edition? I'm more concerned about how to get data in and out of the database through SQL Management tools. Are there any other issues that I might face? Thanks, Mike

    Read the article

  • PHP - Centos OpenSSL error

    - by mabbs
    i'm currently having a problem with OpenSSL on my Centos 6.5 Server. it ran perfectly fine until sunday. and i checked the error_log and i saw this error in the log PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/openssl.so' - /usr/lib64/php/modules/openssl.so: cannot open shared object file: No such file or directory in Unknown on line 0 i tried phpinfo(); and i found that openssl is enabled i tried php -m it returned [PHP Modules] bz2 calendar Core ctype curl date dom ereg exif fileinfo filter ftp gd gettext gmp hash iconv interbase json libxml mbstring mcrypt memcache mysql mysqli openssl pcntl pcre PDO PDO_Firebird pdo_mysql pdo_sqlite Phar pspell readline Reflection session shmop SimpleXML snmp sockets SPL sqlite3 standard tokenizer wddx xml xmlreader xmlrpc xmlwriter xsl zip zlib UPDATE this is what i got from rpm -qa | grep php just like what Mike Suggested php-php-gettext-1.0.11-3.el6.noarch php-mcrypt-5.3.3-3.el6.x86_64 php-interbase-5.3.3-3.el6.x86_64 php-pdo-5.3.3-27.el6_5.1.x86_64 php-5.3.3-27.el6_5.1.x86_64 php-mysql-5.3.3-27.el6_5.1.x86_64 php-snmp-5.3.3-27.el6_5.1.x86_64 php-gd-5.3.3-27.el6_5.1.x86_64 php-xml-5.3.3-27.el6_5.1.x86_64 php-pear-1.9.4-4.el6.noarch php-pecl-memcache-3.0.5-4.el6.x86_64 phpMyAdmin-3.5.8.2-1.el6.noarch php-common-5.3.3-27.el6_5.1.x86_64 php-cli-5.3.3-27.el6_5.1.x86_64 php-devel-5.3.3-27.el6_5.1.x86_64 php-mbstring-5.3.3-27.el6_5.1.x86_64 php-xmlrpc-5.3.3-27.el6_5.1.x86_64 php-pspell-5.3.3-27.el6_5.1.x86_64

    Read the article

  • Squirrelmail receiving duplicate emails

    - by Austin
    A client of mine is experiencing issues with his email, it appears that whenever he receives email from a certain domain it comes as duplicates. Not only are they duplicates but the duplicated items have a (+) sign next to them which usually indicates an attachment. Could this be because of a forwarding issue? Here are the headers: Return-Path: <[email protected]> Received: from bigcat.centralmasswebdesign.com (root@localhost) by tarbellconstruction.com (8.13.1/8.13.1) with ESMTP id o4OFnO23003379 for <[email protected]>; Mon, 24 May 2010 11:49:24 -0400 X-ClientAddr: 72.249.26.200 Received: from mf3.spamfiltering.com (mf3.spamfiltering.com [72.249.26.200]) by bigcat.centralmasswebdesign.com (8.13.1/8.13.1) with ESMTP id o4OFnOjF005520 for <[email protected]>; Mon, 24 May 2010 11:49:24 -0400 X-Envelope-From: [email protected] X-Envelope-To: [email protected] Received: From 67-132-16-226.dia.static.qwest.net (67.132.16.226) by mf3.spamfiltering.com (MAILFOUNDRY) id 6lzIAmdLEd+oFQAw for [email protected]; Mon, 24 May 2010 15:49:23 -0000 (GMT) Received: from mail pickup service by WMA2-EXCH1.NELCO-USA.net with Microsoft SMTPSVC; Mon, 24 May 2010 11:49:18 -0400 Content-Transfer-Encoding: 7bit Importance: normal Priority: normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.4325 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01CAFB58.AAB268D0" Subject: weekly activity report for week ending May 22, 2010 Date: Mon, 24 May 2010 11:49:16 -0400 Message-ID: <15BCC4D99E8CBF48A2FA37A318CFF5C801209CCC@wma2-exch1.NELCO-USA.net> X-MS-Has-Attach: yes X-MS-TNEF-Correlator: Thread-Topic: weekly activity report for week ending May 22, 2010 thread-index: Acr7WKpdCelRCiocT1eBY2YN5Ma8DA== From: "Mike LeBlanc" <[email protected]> To: "Keith Berube" <[email protected]>, "Ken Tarbell" <[email protected]> X-OriginalArrivalTime: 24 May 2010 15:49:18.0361 (UTC) FILETIME=[AB546890:01CAFB58]

    Read the article

  • Ubuntu: how to get audio to work in both Spotify (under Wine) and Flash (in Firefox)?

    - by Jonik
    I'm running Spotify on Linux using Wine. Sound worked great (even though the sound test in winecfg failed!), until I installed alsa-oss package yesterday to get Flash sound working in Firefox. Now Spotify says: "There is a problem with your sound card. Spotify can't play music." So the question is, how to get the sound in Spotify working again, so that it also keeps working in Flash & Firefox? Tweak some ALSA settings? Spotify settings? Add/remove some packages? By the way, curiously, now that sound doesn't work in Spotify, winecfg's "Test Sound" does work! This is Ubuntu 8.04 (Hardy). Sound card / driver is probably an integrated AC'97. Please mention if any additional information about the system is needed! Update: I have Flash 10 installed (outside the packaging system, using $MOZ_PLUGIN_PATH env variable), but also had Flash 9 from flashplugin-nonfree package - and the earlier version was being used by Firefox! Based on what Mike Arthur said about Flash and alsa-oss, I removed the older Flash (flashplugin-nonfree package) and alsa-oss - and Flash sound still works, which is nice. But for some reason Spotify still doesn't play sound, even though things should now be like they were originally... Update 2: Got it working, all smoothly, finally.

    Read the article

  • Is there a program to show programs loading during the boot process in real time?

    - by Gary M. Mugford
    Hi all, There are any number of programs that will show me WHAT will run during the boot process for Windows XP. I've always been partial to Mike Lin's version but there are several others, some of which are quite possibly superior. That's not the issue. What I'd really like is a program that would load first and then would list the programs that were about to load and then check them off as the programs loaded. This isn't something I necessarily need for myself. But certain family members get click happy as soon as they see the icon they eventually want to run and end up clicking on it. THIRTY TWO TIMES in one memorable crash-inducing spasm. If there was some way for 'progress' to be shown during the loading of from the various spots Windows auto-loads from, PLUS a BIG BANNER saying "Please do not move the mouse or click on anything until done.", I think I might cut down on my early morning family support calls significantly. I've tried a variety of searches, but I couldn't find the ones that show in real time in the forest of links to programs that will show the list after the fact. Any leads? If not, do any of you who write the after-the-fact listers want to take a shot at producing a utility to do what I think would be a relatively popular utility? Best of the season to all of you and yours. Thanks in advance for any replies, GM

    Read the article

  • Cannot log into Windows XP Embedded after changing computer name

    - by bignis
    Hi everyone, I purchased a tablet pc running Windows XP Embedded. The tablet was used in a medical clinic on a domain. For illustrative purposes, say the computer name was "COMPLEXCOMPUTERNAME". There was an administrator account, so I changed the password on account "COMPLEXCOMPUTERNAME\Administrator" to a blank password. I logged out and logged in successfully with the blank administrator password when the log-in dialog said "Log in to COMPLEXCOMPUTERNAME (this computer)". Next I renamed the computer from COMPLEXCOMPUTERNAME to SIMPLECOMPUTERNAME, which required a reboot. I did so, and I can't log in anymore. The log in screen still just says "Log in to COMPLEXCOMPUTERNAME (this computer)", but the account "COMPLEXCOMPUTERNAME\Administrator" no longer works. I suspect that this is because the computer has been renamed to SIMPLECOMPUTERNAME and it can no longer find the account. The "Log in to" dropdown can't be typed in, so I can't change the computer name Windows is trying to log into. I fear that I'm stuck. Is there a way I can get Windows to log into the computer name that I chose? Thanks! -Mike

    Read the article

  • Domain joining debate for Outlook 2010 with Exchange 2007 on windows SBS 2008 for a user on a laptop that will travel a fair amount of the time.

    - by user71195
    I'm basically debating on whether or not to join the Domain on a Laptop, and was wondering if anyone has had a similar experience. If the computer were staying in the office, its a no brainer. Join the domain. In this case I have a user who will come into the office a few days a week, and work remotely the rest of the time. There is a working VPN using OpenVPN client/server, but it's not site-to-site. My knee jerk reaction is to not join the domain, so that the user can have 1 profile that they always use. In this configuration, should Outlook work properly with the user's domain account, and should the shared calendar still work (at least once inside the VPN)? My concern with joining the domain would be the inability to login to it when elsewhere. Is there maybe a way around this with caching or something? Would creating a second local login make sense for a user like this in any way? If so, why not just skip the domain join to begin with? Any thoughts on or experiences with this would be appreciated. Laptop OS Windows 7 (Not purchased yet.. pro if domain needed) Server SBS 2008, Exchange 2007 Outlook version 2010 Thanks for any help, Mike

    Read the article

  • System locking up with suspicious messages about hard disk

    - by Chris Conway
    My system has started behaving strangely, intermittently locking up. I see messages like the following in syslog: Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY } Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY } And then this: Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY } Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16) Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16) Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133 Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4 Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0 Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1) Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012) Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) There are no messages marked after 23:39. When I next tried to use the machine, it would not return from the screensaver (blank screen), nor switch to another terminal, and I had to hard reboot it. [UPDATE] The output of smartctl is here. I had trouble getting this, because / is being mounted read-only (?!), which prevents most applications from running. Also, it may not be related, but I have the following worrying messages in dmesg: [ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30] [ 10.098486] ACPI: This conflict may cause random problems and system instability [ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.112570] Linux agpgart interface v0.103 [ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 10.161506] it87: Found IT8712F chip at 0x290, revision 8 [ 10.161517] it87: VID is disabled (pins used for GPIO) [ 10.161527] it87: in3 is VCC (+5V) [ 10.161528] it87: in7 is VCCH (+5V Stand-By) [ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45] [ 10.161562] ACPI: This conflict may cause random problems and system instability [ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [UPDATE 2] I swapped in a new SATA cable, per Phil's suggestion. The current output of smartctl is here, if it helps. [UPDATE 3] I don't think the cable fixed it. The system hasn't locked up yet, but my media player crashed a few minutes ago and I have the following in the syslog: Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0) Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16) Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link I get the following response from smartctl: $ sudo smartctl -a /dev/sda [sudo] password for chris: sudo: Can't open /var/lib/sudo/chris/0: Read-only file system smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: /0:0:0:0 Version: scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

    Read the article

  • Talend Enterprise Data Integration overperforms on Oracle SPARC T4

    - by Amir Javanshir
    The SPARC T microprocessor, released in 2005 by Sun Microsystems, and now continued at Oracle, has a good track record in parallel execution and multi-threaded performance. However it was less suited for pure single-threaded workloads. The new SPARC T4 processor is now filling that gap by offering a 5x better single-thread performance over previous generations. Following our long-term relationship with Talend, a fast growing ISV positioned by Gartner in the “Visionaries” quadrant of the “Magic Quadrant for Data Integration Tools”, we decided to test some of their integration components with the T4 chip, more precisely on a T4-1 system, in order to verify first hand if this new processor stands up to its promises. Several tests were performed, mainly focused on: Single-thread performance of the new SPARC T4 processor compared to an older SPARC T2+ processor Overall throughput of the SPARC T4-1 server using multiple threads The tests consisted in reading large amounts of data --ten's of gigabytes--, processing and writing them back to a file or an Oracle 11gR2 database table. They are CPU, memory and IO bound tests. Given the main focus of this project --CPU performance--, bottlenecks were removed as much as possible on the memory and IO sub-systems. When possible, the data to process was put into the ZFS filesystem cache, for instance. Also, two external storage devices were directly attached to the servers under test, each one divided in two ZFS pools for read and write operations. Multi-thread: Testing throughput on the Oracle T4-1 The tests were performed with different number of simultaneous threads (1, 2, 4, 8, 12, 16, 32, 48 and 64) and using different storage devices: Flash, Fibre Channel storage, two stripped internal disks and one single internal disk. All storage devices used ZFS as filesystem and volume management. Each thread read a dedicated 1GB-large file containing 12.5M lines with the following structure: customerID;FirstName;LastName;StreetAddress;City;State;Zip;Cust_Status;Since_DT;Status_DT 1;Ronald;Reagan;South Highway;Santa Fe;Montana;98756;A;04-06-2006;09-08-2008 2;Theodore;Roosevelt;Timberlane Drive;Columbus;Louisiana;75677;A;10-05-2009;27-05-2008 3;Andrew;Madison;S Rustle St;Santa Fe;Arkansas;75677;A;29-04-2005;09-02-2008 4;Dwight;Adams;South Roosevelt Drive;Baton Rouge;Vermont;75677;A;15-02-2004;26-01-2007 […] The following graphs present the results of our tests: Unsurprisingly up to 16 threads, all files fit in the ZFS cache a.k.a L2ARC : once the cache is hot there is no performance difference depending on the underlying storage. From 16 threads upwards however, it is clear that IO becomes a bottleneck, having a good IO subsystem is thus key. Single-disk performance collapses whereas the Sun F5100 and ST6180 arrays allow the T4-1 to scale quite seamlessly. From 32 to 64 threads, the performance is almost constant with just a slow decline. For the database load tests, only the best IO configuration --using external storage devices-- were used, hosting the Oracle table spaces and redo log files. Using the Sun Storage F5100 array allows the T4-1 server to scale up to 48 parallel JVM processes before saturating the CPU. The final result is a staggering 646K lines per second insertion in an Oracle table using 48 parallel threads. Single-thread: Testing the single thread performance Seven different tests were performed on both servers. Given the fact that only one thread, thus one file was read, no IO bottleneck was involved, all data being served from the ZFS cache. Read File ? Filter ? Write File: Read file, filter data, write the filtered data in a new file. The filter is set on the “Status” column: only lines with status set to “A” are selected. This limits each output file to about 500 MB. Read File ? Load Database Table: Read file, insert into a single Oracle table. Average: Read file, compute the average of a numeric column, write the result in a new file. Division & Square Root: Read file, perform a division and square root on a numeric column, write the result data in a new file. Oracle DB Dump: Dump the content of an Oracle table (12.5M rows) into a CSV file. Transform: Read file, transform, write the result data in a new file. The transformations applied are: set the address column to upper case and add an extra column at the end, which is the concatenation of two columns. Sort: Read file, sort a numeric and alpha numeric column, write the result data in a new file. The following table and graph present the final results of the tests: Throughput unit is thousand lines per second processed (K lines/second). Improvement is the % of improvement between the T5140 and T4-1. Test T4-1 (Time s.) T5140 (Time s.) Improvement T4-1 (Throughput) T5140 (Throughput) Read/Filter/Write 125 806 645% 100 16 Read/Load Database 195 1111 570% 64 11 Average 96 557 580% 130 22 Division & Square Root 161 1054 655% 78 12 Oracle DB Dump 164 945 576% 76 13 Transform 159 1124 707% 79 11 Sort 251 1336 532% 50 9 The improvement of single-thread performance is quite dramatic: depending on the tests, the T4 is between 5.4 to 7 times faster than the T2+. It seems clear that the SPARC T4 processor has gone a long way filling the gap in single-thread performance, without sacrifying the multi-threaded capability as it still shows a very impressive scaling on heavy-duty multi-threaded jobs. Finally, as always at Oracle ISV Engineering, we are happy to help our ISV partners test their own applications on our platforms, so don't hesitate to contact us and let's see what the SPARC T4-based systems can do for your application! "As describe in this benchmark, Talend Enterprise Data Integration has overperformed on T4. I was generally happy to see that the T4 gave scaling opportunities for many scenarios like complex aggregations. Row by row insertion in Oracle DB is faster with more than 650,000 rows per seconds without using any bulk Oracle capabilities !" Cedric Carbone, Talend CTO.

    Read the article

  • OpenSSL Versions in Solaris

    - by darrenm
    Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10.  I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9).  At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7.  The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine.   For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10.  Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph!  OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile.  At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way.  There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train).  The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon.  Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express.  First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0.  This was a huge milestone for a long standing and highly respected open source project.  It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version.     In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL.  The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream.  At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

    Read the article

  • The JavaOne 2012 Sunday Technical Keynote

    - by Janice J. Heiss
    At the JavaOne 2012 Sunday Technical Keynote, held at the Masonic Auditorium, Mark Reinhold, Chief Architect, Java Platform Group, stated that they were going to do things a bit differently--"rather than 20 minutes of SE, and 20 minutes of FX, and 20 minutes of EE, we're going to mix it up a little," he said. "For much of it, we're going to be showing a single application, to show off some of the great work that's been done in the last year, and how Java can scale well--from the cloud all the way down to some very small embedded devices, and how JavaFX scales right along with it."Richard Bair and Jasper Potts from the JavaFX team demonstrated a JavaOne schedule builder application with impressive navigation, animation, pop-overs, and transitions. They noted that the application runs seamlessly on either Windows or Macs, running Java 7. They then ran the same application on an Ubuntu Linux machine--"it just works," said Blair.The JavaFX duo next put the recently released JavaFX Scene Builder through its paces -- dragging and dropping various image assets to build the application's UI, then fine tuning a CSS file for the finished look and feel. Among many other new features, in the past six months, JavaFX has released support for H.264 and HTTP live streaming, "so you can get all the real media playing inside your JavaFX application," said Bair. And in their developer preview builds of JavaFX 8, they've now split the rendering thread from the UI thread, to better take advantage of multi-core architectures.Next, Brian Goetz, Java Language Architect, explored language and library features planned for Java SE 8, including Lambda expressions and better parallel libraries. These feature changes both simplify code and free-up libraries to more effectively use parallelism. "It's currently still a lot of work to convert an application from serial to parallel," noted Goetz.Reinhold had previously boasted of Java scaling down to "small embedded devices," so Blair and Potts next ran their schedule builder application on a small embedded PandaBoard system with an OMAP4 chip set. Connected to a touch screen, the embedded board ran the same JavaFX application previously seen on the desktop systems, but now running on Java SE Embedded. (The systems can be seen and tried at four of the nearby JavaOne hotels.) Bob Vandette, Java Embedded Architect, then displayed a $25 Rasberry Pi ARM-based system running Java SE Embedded, noting the even greater need for the platform independence of Java in such highly varied embedded processor spaces. Reinhold and Vandetta discussed Project Jigsaw, the planned modularization of the Java SE platform, and its deferral from the Java 8 release to Java 9. Reinhold demonstrated the promise of Jigsaw by running a modularized demo version of the earlier schedule builder application on the resource constrained Rasberry Pi system--although the demo gods were not smiling down, and the application ultimately crashed.Reinhold urged developers to become involved in the Java 8 development process--getting the weekly builds, trying out their current code, and trying out the new features:http://openjdk.java.net/projects/jdk8http://openjdk.java.net/projects/jdk8/spechttp://jdk8.java.netFrom there, Arun Gupta explored Java EE. The primary themes of Java EE 7, Gupta stated, will be greater productivity, and HTML 5 functionality (WebSocket, JSON, and HTML 5 forms). Part of the planned productivity increase of the release will come from a reduction in writing boilerplate code--through the widespread use of dependency injection in the platform, along with default data sources and default connection factories. Gupta noted the inclusion of JAX-RS in the web profile, the changes and improvements found in JMS 2.0, as well as enhancements to Java EE 7 in terms of JPA 2.1 and EJB 3.2. GlassFish 4 is the reference implementation of Java EE 7, and currently includes WebSocket, JSON, JAX-RS 2.0, JMS 2.0, and more. The final release is targeted for Q2, 2013. Looking forward to Java EE 8, Gupta explored how the platform will provide multi-tenancy for applications, modularity based on Jigsaw, and cloud architecture. Meanwhile, Project Avatar is the group's incubator project for designing an end-to-end framework for building HTML 5 applications. Santiago Pericas-Geertsen joined Gupta to demonstrate their "Angry Bids" auction/live-bid/chat application using many of the enhancements of Java EE 7, along with an Avatar HTML 5 infrastructure, and running on the GlassFish reference implementation.Finally, Gupta covered Project Easel, an advanced tooling capability in NetBeans for HTML5. John Ceccarelli, NetBeans Engineering Director, joined Gupta to demonstrate creating an HTML 5 project from within NetBeans--formatting the project for both desktop and smartphone implementations. Ceccarelli noted that NetBeans 7.3 beta will be released later this week, and will include support for creating such HTML 5 project types. Gupta directed conference attendees to: http://glassfish.org/javaone2012 for everything about Java EE and GlassFish at JavaOne 2012.

    Read the article

  • Session Report - Modern Software Development Anti-Patterns

    - by Janice J. Heiss
    In this standing-room-only session, building upon his 2011 JavaOne Rock Star “Diabolical Developer” session, Martijn Verburg, this time along with Ben Evans, identified and explored common “anti-patterns” – ways of doing things that keep developers from doing their best work. They emphasized the importance of social interaction and team communication, along with identifying certain psychological pitfalls that lead developers astray. Their emphasis was less on technical coding errors and more how to function well and to keep one’s focus on what really matters. They are the authors of the highly regarded The Well-Grounded Java Developer and are both movers and shakers in the London JUG community and on the Java Community Process. The large room was packed as they gave a fast-moving, witty presentation with lots of laughs and personal anecdotes. Below are a few of the anti-patterns they discussed.Anti-Pattern One: Conference-Driven DeliveryThe theme here is the belief that “Real pros hack code and write their slides minutes before their talks.” Their response to this anti-pattern is an expression popular in the military – PPPPPP, which stands for, “Proper preparation prevents piss-poor performance.”“Communication is very important – probably more important than the code you write,” claimed Verburg. “The more you speak in front of large groups of people the easier it gets, but it’s always important to do dry runs, to present to smaller groups. And important to be members of user groups where you can give presentations. It’s a great place to practice speaking skills; to gain new skills; get new contacts, to network.”They encouraged attendees to record themselves and listen to themselves giving a presentation. They advised them to start with a spouse or friends if need be. Learning to communicate to a group, they argued, is essential to being a successful developer. The emphasis here is that software development is a team activity and good, clear, accessible communication is essential to the functioning of software teams. Anti-Pattern Two: Mortgage-Driven Development The main theme here was that, in a period of worldwide recession and economic stagnation, people are concerned about keeping their jobs. So there is a tendency for developers to treat knowledge as power and not share what they know about their systems with their colleagues, so when it comes time to fix a problem in production, they will be the only one who knows how to fix it – and will have made themselves an indispensable cog in a machine so you cannot be fired. So developers avoid documentation at all costs, or if documentation is required, put it on a USB chip and lock it in a lock box. As in the first anti-pattern, the idea here is that communicating well with your colleagues is essential and documentation is a key part of this. Social interactions are essential. Both Verburg and Evans insisted that increasingly, year by year, successful software development is more about communication than the technical aspects of the craft. Developers who understand this are the ones who will have the most success. Anti-Pattern Three: Distracted by Shiny – Always Use the Latest Technology to Stay AheadThe temptation here is to pick out some obscure framework, try a bit of Scala, HTML5, and Clojure, and always use the latest technology and upgrade to the latest point release of everything. Don’t worry if something works poorly because you are ahead of the curve. Verburg and Evans insisted that there need to be sound reasons for everything a developer does. Developers should not bring in something simply because for some reason they just feel like it or because it’s new. They recommended a site run by a developer named Matt Raible with excellent comparison spread sheets regarding Web frameworks and other apps. They praised it as a useful tool to help developers in their decision-making processes. They pointed out that good developers sometimes make bad choices out of boredom, to add shiny things to their CV, out of frustration with existing processes, or just from a lack of understanding. They pointed out that some code may stay in a business system for 15 or 20 years, but not all code is created equal and some may change after 3 or 6 months. Developers need to know where the code they are contributing fits in. What is its likely lifespan? Anti-Pattern Four: Design-Driven Design The anti-pattern: If you want to impress your colleagues and bosses, use design patents left, right, and center – MVC, Session Facades, SOA, etc. Or the UML modeling suite from IBM, back in the day… Generate super fast code. And the more jargon you can talk when in the vicinity of the manager the better.Verburg shared a true story about a time when he was interviewing a guy for a job and asked him what his previous work was. The interviewee said that he essentially took patterns and uses an approved book of Enterprise Architecture Patterns and applied them. Verburg was dumbstruck that someone could have a job in which they took patterns from a book and applied them. He pointed out that the idea that design is a separate activity is simply wrong. He repeated a saying that he uses, “You should pay your junior developers for the lines of code they write and the things they add; you should pay your senior developers for what they take away.”He explained that by encouraging people to take things away, the code base gets simpler and reflects the actual business use cases developers are trying to solve, as opposed to the framework that is being imposed. He told another true story about a project to decommission a very long system. 98% of the code was decommissioned and people got a nice bonus. But the 2% remained on the mainframe so the 98% reduction in code resulted in zero reduction in costs, because the entire mainframe was needed to run the 2% that was left. There is an incentive to get rid of source code and subsystems when they are no longer needed. The session continued with several more anti-patterns that were equally insightful.

    Read the article

  • Windows Phone 8 Announcement

    - by Tim Murphy
    As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall.  That itself is great news, but the features coming were like confetti flying in all different directions.  Given this speed I couldn’t capture every feature they covered.  A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8.  It will also run natively on multiple cores.  They mentioned that they have run it on up to 64 cores to this point.  The phones as you might expect will at least start as dual core.  If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores.  The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media.  Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720.  Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup.  Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time.  What Microsoft showed today included the fact that they didn’t just want it to be for the phone.  There is cross platform NFC functionality between Windows Phone 8 and Windows 8.  The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment.  We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept.  What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms.  They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software.  Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion.  This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released.  With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release.  Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way.  This allows for less important tiles or ones with less information to be made smaller.  And There Is More So what other tidbits came out of the presentation?  Later this summer the API for WP8 will be available.  There will be developer events coming to a city near you.  Another announcement of interest to developers is the ability to write applications at a native code level.  This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air.  Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates.  Update coming for Windows Phone 7.5 customers to WP7.8.  The main enhancement will be the new live tile features.  The big bonus is that the update will bypass the carriers.  I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post.  Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

    Read the article

  • Windows Phone 8 Launch Event Summary

    - by Tim Murphy
    Today was the official coming out party for Windows Phone 8.  Below is a summary of the launch event.  There is a lot here to stay with me. They started with a commercial staring Joe Belfiore show how his Windows Phone 8 was personal too him which highlights something I think Microsoft has done well over the last couple of event: spotlight how Windows Phone is a different experience from other smartphones.  Joe actually called iPhone and Android “tired old metaphors" and explained that the idea around Windows Phone was to “reinvent the smartphone around you” as “the most personal smartphone operating system”.  The is the message that they need to drive home in their adds. The only real technical aspect we found out was that they have optimized the operating system around the dual core Qualcomm Snapdragon chip set.  It seems like all of the other hardware goodies had already been announced.  The remainder of the event was centered around new features of the OS and app announcements. So what are we getting?  The integrated features included lock screen live tile, Data Sense, Rooms and Kids corner.  There wasn’t a lot of information about it, but Joe also talked about apps not just having live tiles, but being live apps that could integrate with wallet and the hub. The lock screen will now be able to be personalized with live tile data or even a photo slide show.  This gives the lock screen an even better ability to give you the information you want to know before you even unlock the phone. The Kids Corner allows you as a parent to setup an area on your phone that you kids can go into an use it without disturbing your apps.  They can play games or use apps that you have designated and will only see those apps.  It even has a special lock screen gesture just for the kids corner. Rooms allow you to organize your phone around the groups of people in your life.  You get a shared calendar, a room wall as well as shared notes beyond just being able to send messages to a group.  You can also invite people not on the Windows Phone platform to access an online version of the room. Data Sense is a new feature that gives you better control and understanding of your data plan usage.  You can see which applications are using data and it can automatically adjust they way your phone behaves as you get close to your data limit. Add to these features the fact that the entire Windows ecosystem is integrated with SkyDrive and you have an available anywhere experience that is unequaled by any other platform.  Your document, photos and music are available on your Windows Phone, Window 8 device and Xbox.  SkyDrive also doesn’t limit how long you can keep files like the competing cloud platforms and give more free storage. It was interesting the way they made the launch event more personal.  First Joe brought out his own kids to demo the Kids Corner.  They followed this up by bringing out Jessica Alba to discuss her experience on the Windows Phone 8.  They need to keep putting a face on the product instead of just showing features as a cold list. Then we get to apps.  We knew that the new Skype was coming, but we found out that it was created in such a way that it can receive calls without running consistently in the background which would eat up battery.  This announcement was follow by the coming Facebook app that is optimized for Windows Phone 8.  As a matter of fact they indicated that just after launch the marketplace would have 46 out of the top 50 apps used by all smartphone platforms.  In a rational world this tide with over 120,000 apps currently in the marketplace there should be no more argument about the Windows Phone ecosystem. For those of us who develop for Windows Phone and weren’t on the early adoption program will finally get access to the SDK tomorrow after an announcement at Build (more waiting).  Perhaps we will get a few new features then. In the end I wouldn’t say there were any huge surprises, but I am really excited about getting my hands on the devices next month and starting to develop.  Stay tuned. del.icio.us Tags: Windows Phone,Windows Phone 8,Winodws Phone 8 Launch,Joe Belfiore,Jessica Alba

    Read the article

  • Representing xml through a single class

    - by Charles
    I am trying to abstract away the difficulties of configuring an application that we use. This application takes a xml configuration file and it can be a bit bothersome to manually edit this file, especially when we are trying to setup some automatic testing scenarios. I am finding that reading xml is nice, pretty easy, you get a network of element nodes that you can just go through and build your structures quite nicely. However I am slowly finding that the reverse is not quite so nice. I want to be able to build a xml configuration file through a single easy to use interface and because xml is composed of a system of nodes I am having a lot of struggle trying to maintain the 'easy' part. Does anyone know of any examples or samples that easily and intuitively build xml files without declaring a bunch of element type classes and expect the user to build the network themselves? For example if my desired xml output is like so <cook version="1.1"> <recipe name="chocolate chip cookie"> <ingredients> <ingredient name="flour" amount="2" units="cups"/> <ingredient name="eggs" amount="2" units="" /> <ingredient name="cooking chocolate" amount="5" units="cups" /> </ingredients> <directions> <direction name="step 1">Preheat oven</direction> <direction name="step 2">Mix flour, egg, and chocolate</direction> <direction name="step 2">bake</direction> </directions> </recipe> <recipe name="hot dog"> ... How would I go about designing a class to build that network of elements and make one easy to use interface for creating recipes? Right now I have a recipe object, an ingredient object, and a direction object. The user must make each one, set the attributes in the class and attach them to the root object which assembles the xml elements and outputs the formatted xml. Its not very pretty and I just know there has to be a better way. I am using python so bonus points for pythonic solutions

    Read the article

  • Want a headless build server for SSDT without installing Visual Studio? You’re out of luck!

    - by jamiet
    An issue that regularly seems to rear its head on my travels is that of headless build servers for SSDT. What does that mean exactly? Let me give you my interpretation of it. A SQL Server Data Tools (SSDT) project incorporates a build process that will basically parse all of the files within the project and spit out a .dacpac file. Where an organisation employs a Continuous Integration process they will likely want to automate the building of that dacpac whenever someone commits a change to the source control repository. In order to do that the organisation will use a build server (e.g. TFS, TeamCity, Jenkins) and hence that build server requires all the pre-requisite software that understands how to build an SSDT project. The simplest way to install all of those pre-requisites is to install SSDT itself however a lot of folks don’t like that approach because it installs a lot unnecessary components on there, not least Visual Studio itself. Those folks (of which i am one) are of the opinion that it should be unnecessary to install a heavyweight GUI in order to simply get a few software components required to do something that inherently doesn’t even need a GUI. The phrase “headless build server” is often used to describe a build server that doesn’t contain any heavyweight GUI tools such as Visual Studio and is a desirable state for a build server. In his blog post Headless MSBuild Support for SSDT (*.sqlproj) Projects Gert Drapers outlines the steps necessary to obtain a headless build server for SSDT: This article describes how to install the required components to build and publish SQL Server Data Tools projects (*.sqlproj) using MSBuild without installing the full SQL Server Data Tool hosted inside the Visual Studio IDE. http://sqlproj.com/index.php/2012/03/headless-msbuild-support-for-ssdt-sqlproj-projects/ Frankly however going through these steps is a royal PITA and folks like myself have longed for Microsoft to support headless build support for SSDT by providing a distributable installer that installs only the pre-requisites for building SSDT projects. Yesterday in MSDN forum thread Building a VS2013 headless build server - it's sooo hard Mike Hingley complained about this very thing and it prompted a response from Kevin Cunnane from the SSDT product team: The official recommendation from the TFS / Visual Studio team is to install the version of Visual Studio you use on the build machine. I, like many others, would rather not have to install full blown Visual Studio and so I asked: Is there any chance you'll ever support any of these scenarios: Installation of all build/deploy pre-requisites without installing the VS shell? TFS shipping with all of the pre-requisites for doing SSDT project build/deploys 3rd party build servers (e.g. TeamCity) shipping with all of the requisites for doing SSDT project build/deploys I have to say that the lack of a single installer containing all the pre-requisites for SSDT build/deploy puzzles me. Surely the DacFX installer would be a perfect vehicle for that? Kevin replied again: The answer is no for all 3 scenarios. We looked into this issue, discussed it with the Visual Studio / TFS team, and in the end agreed to go with their latest guidance which is to install Visual Studio (e.g. VS2013 Express for Web) on the build machine. This is how Visual Studio Online is doing it and it's the approach recommended for customers setting up their own TFS build servers. I would hope this is compatible with 3rd party build servers but have not verified whether this works with TeamCity etc. Note that DacFx MSI isn't a suitable release vehicle for this as we don't want to include Visual Studio/MSBuild dependencies in that package. It's meant to just include the core DacFx DLLs used by SSMS, SqlPackage.exe on the command line, etc. What this means is we won't be providing a separate MSI installer or nuget package with just the necessary build DLLs you need to run your build and tests. If someone wanted to create a script that generated a nuget package based on our DLLs and targets files, then release that somewhere on the web for easier integration with 3rd party build servers we've no problem with that. Again, here’s the link to the thread and its worth reading in its entirety if this is something that interests you. So there you have it. Microsoft will not be be providing support for headless build servers for SSDT but if someone in the community wants to go ahead and roll their own, go right ahead. @Jamiet

    Read the article

  • Silverlight Firestarter thoughts, and thanks to one and all!

    - by Dave Campbell
    A few metrics that of course got out of hand, but some may find interesting:   1/2 My share of the MVP of the Year award in February of 2009 with Laurent Bugnion 2 Number of degrees I hold: B.S., M.S. Electrical Engineering 3 Number of years in the U.S. Army 3.5 Number of years SilverlighCream has been posted 4 Number of times awarded MVP 6 Number of professional positions I've worked: Antenna Rigger, Boilermaker, Musician, Electronic Technician, Hardware Engineer, Software Engineer 16 Number of companies I've worked for during my career as an Engineer 19 Age at which I turned my first line of code 28 Age at which I hit the workforce as an Engineer 33 Number of years working as an Engineer 43 Number of years writing code 62 Number of years since instantiation 116 Number of tags to search SilverlightCream with 645 Number of blogs I view to find articles (at this moment) 664 Number of articles tagged wp7dev at SilverlightCream right now 700 Number of Twitter followers for WynApse 981 Number of individual bloggers in the SilverlightCream database 1002 Number of SilverlightCream blogposts 1100 Number of people live in Redmond for the Firestarter (I think) 1428 Number of total blogposts at GeeksWithBlogs (not counting this one) 4200 Number of Feedburner subscribers (approximately) 6500 Number of Twitter followers for SilverlightNews (approximately) 7087 Number of posts tagged and aggregated at SilverlightCream right now 13000 Number of people registered to watch the Firestarter online (I think) The overwhelming feeling I have returning from the Silverlight Firestarter: Priceless There is absolutely no way that I could personally thank everyone that over the last few years has held their hand out and offered me a step up to get to the point that Scott Guthrie called me out in his keynote. So I'm just going to hit the highlights here... Scott Guthrie Thanks for not only being the level you are at Microsoft, but for being so approachable, easy to talk to, willing to help everyone, and above all knowledgable. My first level manager at my last position asked if Visual Studio was a graphics program... and you step up to a laptop at a conference and type "File->New Program" ... 'nuff said... oh yeah, thanks for the shoutout! John Papa Thanks for being a good friend, ramroding the Firestarter, being a great guy to be around, and for the poster... holy crap is that cool. Tim Heuer Thanks for all you did as a great DE in Phoenix, and for helping out so many of us, of course being a great guy, and for the poster as well... I think you and John shared that task. In no order at all my buddy Michael Washington, Laurent Bugnion (the other half of the first Silverlight MVP of the Year) Tim Sneath, Mike Harsh, Chad Campbell and Bryant Likes (from back in the day), Adam Kinney, Jesse Liberty, Jeff Paries, Pete Brown, András Velvárt, David Kelly, Michael Palermo, Scott Cate, Erik Mork, and on and on... don't feel bad if your name didn't appear, I have simply too many supporters to name. Silverlight Firestarter Indeed All the people mentioned here, and all the MVPs knew Silverlight was NOT dead, but because of a very unfortunate circumstance, the popular media opinion became that. Consequently the Firestarter exploded from a laid-back event to a global conference. People worked their ass off getting bits ready and presentations using those bits. All to stem the flow of misinformation. All involved please accept my personal thanks for an absolutely awesome job. I had the priviledge of watching the 'prep' on Wednesday afternoon, and was blown away the first time I saw the 3D demo... and have been blown away every time I've seen it since. Not to mention all the other goodness in Silverlight 5. Yes I hit 1000 on my blog, but more importantly, all of you are blogging and using Silverlight, and Microsoft hit one completely out of the park... no... they knocked it out of the neighborhood with the Firestarter. It was amazing to be there for it, and it will be awesome to use the new bits as we get them. Keep reading, there's tons more to come with Silverlight and SilverlightCream following along behind. As usual, this old hacker is humbled to be allowed to play with all the cool kids... Thanks one and all for everything, and Stay in the 'Light

    Read the article

  • Ann Arbor Day of .NET 2010 Recap

    - by PSteele
    Had a great time at the Ann Arbor Day of .NET on Saturday.  Lots of great speakers and topics.  And chance to meet up with friends you usually only communicate with via email/twitter. My Presentation I presented "Getting up to speed with C# 3.5 — Just in time for 4.0!".  There's still a lot of devs that are either stuck in .NET 2.0 or just now moving to .NET 3.5.  This presentation gave highlights of a lot of the key features of 3.5.  I had great questions from the audience.  Afterwards, I talked with a few people who are just now getting in to 3.5 and they told me they had a lot of "A HA!" moments when something I said finally clicked and made sense from a code sample they had seen on the web.  Thanks to all who attended! A few people have asked me for the slides and demo.  The slides were nothing more than a table of contents.  90% of the presentation was spent inside Visual Studio demo'ing new techniques.  However, I have included it in the ZIP file with the sample solution.  You can download it here. Dennis Burton on MongoDB I caught Dennis Burton's presentation on MongoDB.  I was really interested in this one as I've missed the last few times Dennis had given it to local user groups.  It was very informative and I want to spend some time learning more about MongoDB.  I'm still an old-school relational guy, but I'm willing to investigate alternatives. Brian Genisio on Prism Since I'm not a Silverlight/WPF guy (yet), I wasn't sure this would interest me.  But I talked with Brian for a couple of minutes before the presentation and he convinced me to catch it.  And I'm glad he did.  Prism looks like a very nice framework for "composable UI's" in Silverlight and WPF.  I like the whole "dependency injection" feel to it.  Nice job Brian! GiveCamp Planning I spent some time Saturday working on things for the upcoming GiveCamp (which is why I only caught a few sessions).  Ann Arbor's Day of .NET and GiveCamp have both been held at Washtenaw Community College so I took some time (along with fellow GiveCamp planners Mike Eaton and John Hopkins) to check out the new location for Ann Arbor GiveCamp this year! In the past, WCC has let us use the Business Education (BE) building for our GiveCamp's.  But this year, they're moving us over to the Morris Lawrence (ML) building.  Let me tell you – this is a step UP!  In the BE building, we were spread across two floors and spread out into classrooms.  Plus, our opening and closing ceremonies were held in the Liberal Arts (LA) building – a bit of a walk from the BE building. In the ML building, we're together for the whole weekend.  We've got a large open area (which can be sectioned off if needed) for everyone to work in:   Right next to that, we have a large area where we can set up tables and eat.  And it helps that we have a wonderful view while eating (yes, that's a lake out there with a fountain): The ML building also has showers (which we'll have access to!) and it's own auditorium for our opening and closing ceremonies. All in all, this year's GiveCamp will be great! Stay tuned to the Ann Arbor GiveCamp website.  We'll be looking for volunteers (devs, designers, PM's, etc…) soon! Technorati Tags: .NET,Day of .NET,GiveCamp,MongoDB,Prism

    Read the article

  • Today's Links (6/29/2011)

    - by Bob Rhubart
    Event-Driven SOA: Events meet Services | Guido Schmutz Oracle ACE Director Guido Schmutz shows you how to achieve extreme loose coupling within a Service-Oriented Architecture by using event-driven interactions. Misconceptions About Software Architecture | Sanjeev Kumar A concise, to-the-point, and informative article by Sanjeev Kumar. Good Leaders Acknowledge What Can't Be Done - Jeffrey Pfeffer - Harvard Business Review "None of us likes to admit to bad decisions," says Jeffrey Pfeffer. "But imagine how much harder that is for someone who has been chosen to lead a large organization precisely because he or she is thought to have the power to see the future more clearly and chart a wise course." Suboptimal Thinking within Enterprise Architecture | James McGovern McGovern says: "We need to remember that enterprises live and thrive beyond just the current person at the helm." Boundaryless Information Flow | Richard Veryard "If all the boundaries are removed or porous, then the (extended) enterprise or ecosystem becomes like a giant sponge, in which all information permeates the whole," Veryard says. "Some people may think that's a good idea, but it's not what I'd call loose coupling." Coming to a City Near You: Oracle Business Analytics Summits | Rob Reynolds This series of events includes a Technology and Architecture track. New Date for Implementation of Sun Hands-On Course Requirement (Oracle Certification) As announced on the Oracle Certification website, Java Architect, Java Developer, Solaris System Administrator and Solaris Security Administrator certification tracks will include a new mandatory course attendance requirement. VirtualBox 4.0.10 is now available for download | Bob Netherton Netherton shares information on the new release. Updated Technical Best Practices whitepaper | Anthony Shorten The Technical Best Practices whitepaper has been updated with the latest advice. "New advice includes new installation advice, advanced settings, new security settings and advice for both Oracle WebLogic and IBM WebSphere installations," says Shorten. Kscope 11 ADF, AIA and Business Rules | Peter Paul van de Beek Whitehorses Solution Architect Peter Paul van de Beek shares his impressions of KScope11 presentations by Markus Eisele, Sten Vesterli, and Edwin Biemond. Amazon AWS for the learning experience | Andrej Koelewijn "Using AWS changes your expectations how your internal data center should operate," says Koelewijn. BPMN is dead, long live BPEL! (SOA Partner Community Blog) Jürgen Kress shares information -- including a long list of speakers -- for the SOA & BPM Integration Days 2011 conference, October 12th & 13th 2011 in Düsseldorf. InfoQ: HTML5 and the Dawn of Rich Mobile Web Applications James Pearce introduces cross-platform web apps development using HTML5 and web frameworks, such as jQTouch, jQuery Mobile, Sencha Touch, PhoneGap, outlining what makes a good framework. InfoQ: Interview and Book Excerpt: CMMI for Development "Frameworks like TOGAF are used to define an architecture that aligns IT assets and resources to support key business needs and processes of key stakeholders," says SEI's Mike Konrad. "But the individual application systems, capabilities, services, networks, and other IT assets and infrastructure still need to be acquired, developed, or sustained." InfoQ: Architecting a Cloud-Scale Identity Fabric | Eric Olden "The most cited reason for not moving to the cloud is concern about security," says Olden. "In particular, managing user identity and access in the cloud is a tough problem to solve and a big security concern for organizations."

    Read the article

  • Silverlight Cream for March 30, 2010 -- #825

    - by Dave Campbell
    In this Issue: Jeremy Likness, Tim Greenfield, Tim Heuer, ondrejsv, XAML Ninja, Nikhil Kothari, Sergey Barskiy, Shawn Oster, smartyP, Christian Schormann(-2-), and John Papa And Glenn Block. Shoutouts: Victor Gaudioso produced a RefCard for DZone: Getting Started with Silverlight and Expression Blend Way to go Victor... it looks great! Gavin Wignall announced Metia launch FourSquare and Bing maps mash up – called Near.me Cheryl Simmons talks about VS2010 and the design surface: Changing Templates with the Silverlight Designer (and seeing the changes immediately) Michael S. Scherotter posted that New York Times Silverlight Kit Updated for Windows Phone 7 Series Jaime Rodriguez posted about 2 free chapters in his new book (with Yochay Kiriaty): A Journey Into Silverlight On Windows Phone -Via Learning WIndows PHone Programming Did you know there was "MSDN Radio"?? Tim Heuer posted follow-up answers to this morning's show: MSDN Radio follow-up answers: Prism for Silverlight, DomainServices and relationships Michael Klucher posted a great set of links for WP7 game development this morning: Great Game Development Tutorials for Windows Phone Zhiming Xue has 3 pages of synopsis and links for everything Windows Phone at MIX. This is the 1st, but at the top of the pages are links to the other two: Windows Phone 7 Content From MIX10 – Part I From SilverlightCream.com: Using WriteableBitmap to Simplify Animations with Clones Jeremy Likness takes a break from his LOB posts to demonstrate a page flip animation using WriteableBitmap to simplify the animation using clones. SAX-like Xml parsing Want some experience or fun with Rx? Tim Greenfield has a post up on building an observable XmlReader. nstalling Silverlight applications without the browser involved Last night I blogged Mike Taulty's take on the "Silent Install" for an OOB app, tonight, I'm posting Tim Heuer's insight on the topic. How to: Create computed/custom properties for sample data in Blend/Sketchflow ondrejsv posted an example of digging into the files that control the sample data for Blend to get what you really want. PathListBox Adventures – radial layout Check out the radial layout XAML Ninja did using the PathListBox ... and all code available. RIA Services and Validation Nikhil Kothari has a great (duh!) post up that follows his Silverlight TV on the same subject: RIA Services and validation... lots of good external links also. Windows Phone 7 Application with OData Sergey Barskiy did an OData to WP7 app by using the feed from MIX10. You can see a list of sessions, and click on one to see details. Getting Blur And DropShadow to work in the Windows Phone Emulator Shawn Oster responds to some forum questions about Blur and DropShadow effects not showing up in the WP7 emulator, and gives the code trick we have to do for now. Metro Icons for Windows Phone 7 We all got the other icon set for WP7 from MSDN, but smartyP pulled the Metro Icons from the PPT deck of the MIX10 presentations... good job! Fonts in SketchFlow Christian Schormann talks about fonts in Sketchflow, where they live on your machine, and how you can use them. Blend 4: About Path Layout, Part III Christian Schormann also has Part III of his epic tutorial up on Path Layout and Blend. This one is on dynamic resizing layouts, and he has links back to the other two if you missed them... or you can find them with a search at SilverlightCream... :) Simple ViewModel Locator for MVVM: The Patients Have Left the Asylum John Papa And Glenn Block teamed up to solve the View First model only without the maintenance involved with the ViewModel locator by using MEF. It only took these guys and hour... sigh... :) Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Postfix log.... spam attempt?

    - by luri
    I have some weird entries in my mail.log. What I'd like to ask is if postfix is avoiding correctly (according with the main.cf attached below) what seems to be relay attempts, presumably for spamming, or if I can enhance it's security somehow. Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: connect from catv-80-99-46-143.catv.broadband.hu[80.99.46.143] Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: warning: non-SMTP command from catv-80-99-46-143.catv.broadband.hu[80.99.46.143]: GET / HTTP/1.1 Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: disconnect from catv-80-99-46-143.catv.broadband.hu[80.99.46.143] Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max connection rate 1/60s for (smtp:80.99.46.143) at Feb 2 11:53:25 Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max connection count 1 for (smtp:80.99.46.143) at Feb 2 11:53:25 Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max cache size 1 at Feb 2 11:53:25 Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: connect from vs148181.vserver.de[62.75.148.181] Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: warning: non-SMTP command from vs148181.vserver.de[62.75.148.181]: GET / HTTP/1.1 Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: disconnect from vs148181.vserver.de[62.75.148.181] Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max connection rate 1/60s for (smtp:62.75.148.181) at Feb 2 12:09:19 Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max connection count 1 for (smtp:62.75.148.181) at Feb 2 12:09:19 Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max cache size 1 at Feb 2 12:09:19 Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: connect from unknown[202.46.129.123] Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: warning: non-SMTP command from unknown[202.46.129.123]: GET / HTTP/1.1 Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: disconnect from unknown[202.46.129.123] Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max connection rate 1/60s for (smtp:202.46.129.123) at Feb 2 14:17:02 Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max connection count 1 for (smtp:202.46.129.123) at Feb 2 14:17:02 Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max cache size 1 at Feb 2 14:17:02 Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: warning: 95.110.224.230: hostname host230-224-110-95.serverdedicati.aruba.it verification failed: Name or service not known Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: connect from unknown[95.110.224.230] Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: lost connection after CONNECT from unknown[95.110.224.230] Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: disconnect from unknown[95.110.224.230] Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max connection rate 1/60s for (smtp:95.110.224.230) at Feb 2 20:57:33 Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max connection count 1 for (smtp:95.110.224.230) at Feb 2 20:57:33 Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max cache size 1 at Feb 2 20:57:33 Feb 2 21:13:44 MYSERVER pop3d: Connection, ip=[::ffff:219.94.190.222] Feb 2 21:13:44 MYSERVER pop3d: LOGIN FAILED, user=admin, ip=[::ffff:219.94.190.222] Feb 2 21:13:50 MYSERVER pop3d: LOGIN FAILED, user=test, ip=[::ffff:219.94.190.222] Feb 2 21:13:56 MYSERVER pop3d: LOGIN FAILED, user=danny, ip=[::ffff:219.94.190.222] Feb 2 21:14:01 MYSERVER pop3d: LOGIN FAILED, user=sharon, ip=[::ffff:219.94.190.222] Feb 2 21:14:07 MYSERVER pop3d: LOGIN FAILED, user=aron, ip=[::ffff:219.94.190.222] Feb 2 21:14:12 MYSERVER pop3d: LOGIN FAILED, user=alex, ip=[::ffff:219.94.190.222] Feb 2 21:14:18 MYSERVER pop3d: LOGIN FAILED, user=brett, ip=[::ffff:219.94.190.222] Feb 2 21:14:24 MYSERVER pop3d: LOGIN FAILED, user=mike, ip=[::ffff:219.94.190.222] Feb 2 21:14:29 MYSERVER pop3d: LOGIN FAILED, user=alan, ip=[::ffff:219.94.190.222] Feb 2 21:14:35 MYSERVER pop3d: LOGIN FAILED, user=info, ip=[::ffff:219.94.190.222] Feb 2 21:14:41 MYSERVER pop3d: LOGIN FAILED, user=shop, ip=[::ffff:219.94.190.222] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: warning: 71.6.142.196: hostname db4142196.aspadmin.net verification failed: Name or service not known Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: connect from unknown[71.6.142.196] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: lost connection after CONNECT from unknown[71.6.142.196] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: disconnect from unknown[71.6.142.196] Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max connection rate 1/60s for (smtp:71.6.142.196) at Feb 3 06:49:29 Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max connection count 1 for (smtp:71.6.142.196) at Feb 3 06:49:29 Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max cache size 1 at Feb 3 06:49:29 I have Postfix 2.7.1-1 running on Ubuntu 10.10. This is my (modified por privacy) main.cf: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key myhostname = mymailserver.org alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mymailserver.org, MYSERVER, localhost relayhost = mynetworks = 127.0.0.0/8, 192.168.1.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all home_mailbox = Maildir/ smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination mailbox_command = smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_security_level = may smtpd_tls_auth_only = no smtp_tls_note_starttls_offer = yes smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom smtp_tls_security_level = may

    Read the article

  • Podcast Show Notes: Collaborate 10 Wrap-Up - Part 1

    - by Bob Rhubart
    OK, I know last week I promised you a program featuring Oracle ACE Directors Mike van Alst (IT-Eye) and Jordan Braunstein (TUSC) and The Definitive Guide to SOA: Oracle Service Bus author Jeff Davies. But things happen. In this case, what happened was Collaborate 10 in Las Vegas. Prior to the event I asked Oracle ACE Director and OAUG board member Floyd Teter to see if he could round up a couple of people at the event for an impromtu interview over Skype (I was here in Cleveland) to get their impressions of the event. Listen to Part 1 Floyd, armed with his brand new iPad, went above and beyond the call of duty. At the appointed hour, which turned out to be about hour after the close of Collaborate 10,  Floyd had gathered nine other people to join him in a meeting room somewhere in the Mandalay Bay Convention Center. Here’s the entire roster: Floyd Teter - Project Manager at Jet Propulsion Lab, OAUG Board Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Mark Rittman - EMEA Technical Director and Co-Founder, Rittman Mead,  ODTUG Board Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Chet Justice - OBI Consultant at BI Wizards Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Elke Phelps - Oracle Applications DBA at Humana, OAUG SIG Chair Blog | LinkedIn | Oracle Mix | Book | Oracle ACE Profile Paul Jackson - Oracle Applications DBA at Humana Blog | LinkedIn | Oracle Mix | Book Srini Chavali - Enterprise Database & Tools Leader at Cummins, Inc Blog | LinkedIn | Oracle Mix Dave Ferguson – President, Oracle Applications Users Group LinkedIn | OAUG Profile John King - Owner, King Training Resources Website | LinkedIn | Oracle Mix Gavyn Whyte - Project Portfolio Manager at iFactory Consulting Blog | Twitter | LinkedIn | Oracle Mix John Nicholson - Channels & Alliances at Greenlight Technologies Website | LinkedIn Big thanks to Floyd for assembling the panelists and handling the on-scene MC/hosting duties.  Listen to Part 1 On a technical note, this discussion was conducted over Skype, using Floyd’s iPad, placed in the middle of the table.  During the call the audio was fantastic – the iPad did a remarkable job. Sadly, the Technology Gods were not smiling on me that day. The audio set-up that I tested successfully before the call failed to deliver when we first connected – I could hear the folks in Vegas, but they couldn’t hear me. A frantic, last-minute adjustment appeared to have fixed that problem, and the audio in my headphones from both sides of the conversation was loud and clear.  It wasn’t until I listened to the playback that I realized that something was wrong. So the audio for Vegas side of the discussion has about the same fidelity as a cell phone. It’s listenable, but disappointing when compared to what it sounded like during the discussion. Still, this was a one shot deal, and the roster of panelists and the resulting conversation was too good and too much fun to scrap just because of an unfortunate technical glitch.   Part 2 of this Collaborate 10 Wrap-Up will run next week. After that, it’s back on track with the previously scheduled program. So stay tuned: RSS del.icio.us Tags: oracle,otn,collborate 10,c10,oracle ace program,archbeat,arch2arch,oaug,odtug,las vegas Technorati Tags: oracle,otn,collborate 10,c10,oracle ace program,archbeat,arch2arch,oaug,odtug,las vegas

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >