Search Results

Search found 4472 results on 179 pages for 'unknown publisher'.

Page 113/179 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Why is Ubuntu offline (except torrents) while Windows is online?

  - by Fahim al Islam

  I am using a static wired connection. Everything was perfect. But suddenly from few hours back I can't access any website. Dropbox, Ubuntu One also can't connect. Ping request is also unsuccessful, but I can download through torrent. I am not trying torrent download and browsing at the same time. So, I think it's not an issue about torrent using all the bandwidth. One important point is that this connection works perfectly on Windows on this same PC (My PC is dual-boot). I have tried the way what izx has suggested (using "sudo sh -c 'echo nameserver 8.8.8.8 /etc/resolv.conf'"), but I'm facing the same problem again. Now I can't even ping 8.8.8.8 and google.com. Though I can ping 74.125.228.2 (which is Google IP address) I can't understand what's happening and why this is happening. I'm new in this website many rules and regulations is unknown to me. So, please don't be bothered for my mistakes. Looking forward for help from anyone. Thanks to all.

  Read the article

• LUKS no longer accepts my my passphrase

  - by Two Spirit

  I created a 4 drive RAID5 setup using mdadm and upgrading from 2TB drives to the new Hitachi 7200RPM 4TB drives. I can initially open my luks partition, but later can no longer access it. I can no longer access my LUKS partition even tho I have the right passphrases. It was working and then at an unknown point in time loose access to LUKS. I've used the same procedures for upgrading from 500G to 1TB to 1.5TB to 2TB. After the first time this happened a week ago, I thought maybe there was some corruption so I added a 2nd Key as a backup. After the second time the LUKS became unaccessible, none of the keys worked. I put LUKS on it using cryptsetup -c aes -s 256 -y luksFormat /dev/md0 # cryptsetup luksOpen /dev/md0 md0_crypt Enter LUKS passphrase: Enter LUKS passphrase: Enter LUKS passphrase: Command failed: No key available with this passphrase. The first time this happened while I was upgrading to 4TB drives, I thought it was a fluke, and ultimately had to recover from backups. I went an used luksAddKey to add a 2nd key as a backup. It happened again and I tried both passphrases, and neither worked. The only thing I'm doing differently this time around is that I've upgraded to 4TB drives which use GPT instead of fdisk. The last time I had to even reboot the box was over 2 years ago. I'm using ubuntu-8.04-server with kernel 2.6.24-29 and upgraded to -2.6.24-31, but that didn't fix the problem.

  Read the article

• Ubuntu 12.04 stopped recognizing my BenQ monitor and reduced resolution to 1024x768

  - by Omri

  A few days ago I installed Ubuntu 12.04 32bit Desktop. It recognized my hardware without a problem (at least that I know of) and all worked fine. I left my system running (it is at work) through the night because it is also working as a database server and when I came today to work the resolution was 1024x768 (the monitor recommends 1920x1080) even though in the Display section of the System Settings it was recognized as BenQ, and no higher resolution was offered. After a restart, the monitor name changed from BenQ to Unknown. This is a desktop computer. I also installed gtk-redshift and f.lux. I checked Additional Drivers to see if there is something I can install but it didn't find anything. I tried to Google it but I didn't find anything about a monitor stopping being recognized after it was already working. I did enable some PPAs yesterday, namely webupd8, mozillateam/thunderbird-stable and some other, and I also followed the instructions to patch the NotifyOSD to be more friendly: sudo add-apt-repository ppa:caffeine-developers/ppa sudo add-apt-repository ppa:leolik/leolik sudo apt-get update sudo apt-get upgrade sudo apt-get install libnotify-bin pkill notify-osd sudo add-apt-repository ppa:nilarimogard/webupd8 sudo apt-get update sudo apt-get install notifyosdconfig I now purged both caffeine-developers and leolik PPAs in the hope it will help, but no change. Has there been a change in the packages that could introduce this problem? Any help will be very appreciated :-) Omri

  Read the article

• USB mass storage couldn't get mounted

  - by revo

  It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• OPN Specialized Latest News (15th November)

  - by swalker

  HELPING YOU TO SPECIALIZE WebCenter Implementation Specialist Exam Preparation Webcasts: WebCenter Content And WebCenter Portal Oracle Partner Network would like to invite you to Refresh Courses for WebCenter Content and WebCenter Portal, to help partners to prepare for the WebCenter Implementation Specialist EXAMS. This is a 3 hours intensive refresher partner-only training session, providing attendees with an overview of WebCenter Content and WebCenter Portal functions and related topics. After the refresher part you will be able to take the relevant Implementation Specialist EXAM depending on your personal focus. NOTE: This is only suitable for experienced WebCenter Content or WebCenter Portal practitioners Who should attend? Partner Consultants who want to become an Oracle WebCenter Content or a WebCenter Portal Certified Implementation Specialist or both, that will help them to differentiate themselves in front of customers and support their Companies to become Specialized. Webcast Details: Click here to read more... Specialized Partners Only! New Service to Promote Your Events The Partner Event Publisher has just been made available to all specialized partners in EMEA.  Partners now have the opportunity to publish their events to the Oracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. Click here to read more information and watch a short video demo. VADs Get Specialized Effective November 1, 2011 , VADs, with a valid Value Added Distributor Agreement will no longer be required to meet customer reference requirements outlined in the business criteria section in order to become specialized. VADs must continue meet all other business and competency criteria set forth in the applicable Knowledge Zone prior to specialization approval. New Certification Pillar Axiom 600 Storage System Your opportunity to take the Pillar Axiom 600 Storage System Essentials (1Z0-581) Exam is vailable now in beta. Pass the exam so you can become a Pillar Axiom 600 Storage Systems Implementation Specialist! Free vouchers are available for Oracle Partners! If you would like to receive a free Beta exam voucher, please send your request to [email protected] and include your name, business email address, company, and the Exam name Pillar Axiom 600 Storage System Essentials Beta exam. New Certification Available: Oracle Utilities Customer Care and Billing Oracle Utilities Customer Care and Billing 2 Essentials (1Z0-562) is a solution designed to help you meet market windows and regulatory deadlines while enjoying a low total cost of ownership and a high return on investment. Take the exam now to become an  Oracle Utilities Customer Care and Billing 2 Essentials Implementation Specialists. MEASURING YOUR SUCCESS We had 1674 Specialized Partners covering 5364 Specializations. Please note that due to OPN contract renewals at any given point in time there are valid Specialized Partners and Specializations which are temporarily not captured in the total statistics. An incremental 1961 individuals were accredited as Implementation Specialists giving an EMEA cumulative total of 9598 Implementation Specialists 26 ISVs obtained one or more Ready's, for a total of 53 Ready's Don't forget! You can submit your own press releases to Oracle! Every time you achieve specialization we'd like to support you getting the message out! Press guidelines and a submission link can be found on the OPN Portal here.

  Read the article

• What is the aim of this email? Is this a ping/sping? [closed]

  - by mplungjan

  Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

  Read the article

• How do you formulate the Domain Model in Domain Driven Design properly (Bounded Contexts, Domains)?

  - by lko

  Say you have a few applications which deal with a few different Core Domains. The examples are made up and it's hard to put a real example with meaningful data together (concisely). In Domain Driven Design (DDD) when you start looking at Bounded Contexts and Domains/Sub Domains, it says that a Bounded Context is a "phase" in a lifecycle. An example of Context here would be within an ecommerce system. Although you could model this as a single system, it would also warrant splitting into separate Contexts. Each of these areas within the application have their own Ubiquitous Language, their own Model, and a way to talk to other Bounded Contexts to obtain the information they need. The Core, Sub, and Generic Domains are the area of expertise and can be numerous in complex applications. Say there is a long process dealing with an Entity for example a Book in a core domain. Now looking at the Bounded Contexts there can be a number of phases in the books life-cycle. Say outline, creation, correction, publish, sale phases. Now imagine a second core domain, perhaps a store domain. The publisher has its own branch of stores to sell books. The store can have a number of Bounded Contexts (life-cycle phases) for example a "Stock" or "Inventory" context. In the first domain there is probably a Book database table with basically just an ID to track the different book Entities in the different life-cycles. Now suppose you have 10+ supporting domains e.g. Users, Catalogs, Inventory, .. (hard to think of relevant examples). For example a DomainModel for the Book Outline phase, the Creation phase, Correction phase, Publish phase, Sale phase. Then for the Store core domain it probably has a number of life-cycle phases. public class BookId : Entity { public long Id { get; set; } } In the creation phase (Bounded Context) the book could be a simple class. public class Book : BookId { public string Title { get; set; } public List<string> Chapters { get; set; } //... } Whereas in the publish phase (Bounded Context) it would have all the text, release date etc. public class Book : BookId { public DateTime ReleaseDate { get; set; } //... } The immediate benefit I can see in separating by "life-cycle phase" is that it's a great way to separate business logic so there aren't mammoth all-encompassing Entities nor Domain Services. A problem I have is figuring out how to concretely define the rules to the physical layout of the Domain Model. A. Does the Domain Model get "modeled" so there are as many bounded contexts (separate projects etc.) as there are life-cycle phases across the core domains in a complex application? Edit: Answer to A. Yes, according to the answer by Alexey Zimarev there should be an entire "Domain" for each bounded context. B. Is the Domain Model typically arranged by Bounded Contexts (or Domains, or both)? Edit: Answer to B. Each Bounded Context should have its own complete "Domain" (Service/Entities/VO's/Repositories) C. Does it mean there can easily be 10's of "segregated" Domain Models and multiple projects can use it (the Entities/Value Objects)? Edit: Answer to C. There is a complete "Domain" for each Bounded Context and the Domain Model (Entity/VO layer/project) isn't "used" by the other Bounded Contexts directly, only via chosen paths (i.e. via Domain Events). The part that I am trying to figure out is how the Domain Model is actually implemented once you start to figure out your Bounded Contexts and Core/Sub Domains, particularly in complex applications. The goal is to establish the definitions which can help to separate Entities between the Bounded Contexts and Domains.

  Read the article

• Recovering data from /

  - by Abhijit Gavas

  I accidentally installed Ubuntu to one of my data drives from Windows. The drive was a NTFS drive and contained about 80 GB of important data. The size of the drive is 110 GB. Its new file system is ext4. In an attempt to recover the data, I downloaded foremost and tried the following commands: foremost -i / -o /media/281C8DB01C8D7998/Recovery/ -T -v foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v (sda7 is the drive in question.) It appears that with either command, foremost gets stuck reading some file. Here is the console output: abhi@abi-PC:/dev$ foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Foremost version 1.5.7 by Jesse Kornblum, Kris Kendall, and Nick Mikus Audit File Foremost started at Fri Sep 28 20:58:00 2012 Invocation: foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Output directory: /media/281C8DB01C8D7998/Recovery_Fri_Sep_28_20_58_00_2012 Configuration file: /etc/foremost.conf Processing: stdin |------------------------------------------------------------------ File: stdin Start: Fri Sep 28 20:58:00 2012 Length: Unknown Num Name (bs=512) Size File Offset Comment Killed As you can see I have to kill it from system monitor. This approach does not seem to be working. What else could I try to recover the files? Please help. The files are very important and I will be devastated if I cannot recover them.

  Read the article

• Ubuntu connects to wireless but doesn't work!

  - by UbuntuUser990

  I just installed Ubuntu 14.04 LTS on my laptop, it connects to my wireless network and shows that it is connected, but when I try to load a webpage or do anything like download Steam for Dota 2, it doesn't work. When I try to connect my Facebook account to Ubuntu, it doesn't work. I want to be able to use Ubuntu with working internet access. What do I do?. ifconfig this shows up eth0 Link encap:Ethernet HWaddr 88:ae:1d:60:56:eb inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) When I type ping askubuntu.com this shows up ping: unknown host askubuntu.com

  Read the article

• Blender - creating bones from transform matrices

  - by user975135

  Notice: this is for the Blender 2.5/2.6 API. Back in the old days in the Blender 2.4 API, you could easily create a bone from a transform matrix in your 3d file as EditBones had an attribute named "matrix", which was an armature-space matrix you could access and modify. The new 2.5+ API still has the "matrix" attribute for EditBones, but for some unknown reason it is now read-only. So how to create EditBones from transform matrices? I could only find one thing: a new "transform()" function, which takes a Matrix too. Transform the the bones head, tail, roll and envelope (when the matrix has a scale component). Perfect, but you already need to have some values (loc/rot/scale) for your bone, otherwise transforming with a matrix like this will give you nothing, your bone will be a zero-sized bone which will be deleted by Blender. if you create default bone values first, like this: bone.tail = mathutils.Vector([0,1,0]) Then transform() will work on your bone and it might seem to create correct bones, but setting a tail position actually generates a matrix itself, use transform() and you don't get the matrix from your model file on your EditBone, but the multiplication of your matrix with the bone's existing one. This can be easily proven by comparing the matrices read from the file with EditBone.matrix. Again it might seem correct in Blender, but now export your model and you see your animations are messed up, as the bind pose rotations of the bones are wrong. I've tried to find an alternative way to assign the transformation matrix from my file to my EditBone with no luck.

  Read the article

• CIFS shares do not mount after upgrade to 12.10 from 12.04

  - by Mothball

  I have seen issues close to my problem but no one seems to have a definitive answer as to what is going on and why the failure occurs. I have a number of NAS devices on my home network and on a previous install of 12.04 and version prior mounting at login worked using this entry for each in fstab: //servername/sharename /media/windowsshare cifs guest,uid=1000,iocharset=utf8,codepage=cp850,cp850 0 0 Now when I use this, 12.10 reports the standard - cannot mount bad option ... blah blah... The kern log reports that the CIFS option "codepage" unknown... changed entry to "unicode" and received the same error message. There are no other error messages or log entries that would indicate another issue, but this is the statement I used for quite awhile with version 12.04 and before. Is the codepage option obsolete in 12.10/CIFS now? Is there a codepage support program that I must load? Is there some kind of helper program that is required to supports the codepage option? A current review of the man pages at samba.org does not make mention of the option "codepage". Extremely confused - any help/insight would be greatly appreciated.

  Read the article

• At what point would you drop some of your principles of software development for the sake of more money?

  - by MeshMan

  I'd like to throw this question out there to interestingly see where the medium is. I'm going to admit that in my last 12 months, I picked up TDD and a lot of the Agile values in software development. I was so overwhelmed with how much better my development of software became that I would never drop them out of principle. Until...I was offered a contracting role that doubled my take home pay for the year. The company I joined didn't follow any specific methodology, the team hadn't heard of anything like code smells, SOLID, etc., and I certainly wasn't going to get away with spending time doing TDD if the team had never even seen unit testing in practice. Am I a sell out? No, not completely... Code will always been written "cleanly" (as per Uncle Bob's teachings) and the principles of SOLID will always be applied to the code that I write as they are needed. Testing was dropped for me though, the company couldn't afford to have such a unknown handed to the team who quite frankly, even I did create test frameworks, they would never use/maintain the test framework correctly. Using that as an example, what point would you say a developer should never drop his craftsmanship principles for the sake of money/other benefits to them personally? I understand that this can be a very personal opinion on how concerned one is to their own needs, business needs, and the sake of craftsmanship etc. But one can consider that for example testing can be dropped if the company decided they would rather have a test team, than rather understand unit testing in programming, would that be something you could forgive yourself for like I did? So given that there is something you would drop, there usually should be an equal cost in the business that makes up for what you drop - hopefully, unless of course you are pretty much out for lining your own pockets and not community/social collaborating ;). Double your money, go back to RAD? Or walk on, and look for someone doing Agile, and never look back...

  Read the article

• Importing tab delimited file into array in Visual Basic 2013 [migrated]

  - by JaceG

  I am needing to import a tab delimited text file that has 11 columns and an unknown number of rows (always minimum 3 rows). I would like to import this text file as an array and be able to call data from it as needed, throughout my project. And then, to make things more difficult, I need to replace items in the array, and even add more rows to it as the project goes on (all at runtime). Hopefully someone can suggest code corrections or useful methods. I'm hoping to use something like the array style sMyStrings(3,2), which I believe would be the easiest way to control my data. Any help is gladly appreciated, and worthy of a slab of beer. Here's the coding I have so far: Imports System.IO Imports Microsoft.VisualBasic.FileIO Public Class Main Dim strReadLine As String Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim sReader As IO.StreamReader = Nothing Dim sRawString As String = Nothing Dim sMyStrings() As String = Nothing Dim intCount As Integer = -1 Dim intFullLoop As Integer = 0 If IO.File.Exists("C:\MyProject\Hardware.txt") Then ' Make sure the file exists sReader = New IO.StreamReader("C:\MyProject\Hardware.txt") Else MsgBox("File doesn't exist.", MsgBoxStyle.Critical, "Error") End End If Do While sReader.Peek >= 0 ' Make sure you can read beyond the current position sRawString = sReader.ReadLine() ' Read the current line sMyStrings = sRawString.Split(New Char() {Chr(9)}) ' Separate values and store in a string array For Each s As String In sMyStrings ' Loop through the string array intCount = intCount + 1 ' Increment If TextBox1.Text <> "" Then TextBox1.Text = TextBox1.Text & vbCrLf ' Add line feed TextBox1.Text = TextBox1.Text & s ' Add line to debug textbox If intFullLoop > 14 And intCount > -1 And CBool((intCount - 0) / 11 Mod 0) Then cmbSelectHinge.Items.Add(sMyStrings(intCount)) End If Next intCount = -1 intFullLoop = intFullLoop + 1 Loop End Sub

  Read the article

• Trying to recover deleted Ubuntu partition

  - by user110984

  I made a mistake in logging into my 200 GB Ubuntu partition. I could not access Grub after that. Using a live CD I then ran Boot_Repair and apparently deleted the partition, I guess because I ran it from my 70 GB Windows partition. I can send the results of boot_info before that and of Boot_Repair. Then I ran TestDisk, which apparently found only dev/sda/ -320GB / 298 / GiB - WDC - WD3200BEVT-22A23T0 (Was there any more I could have done with TestDisk? I looked at the TestDisk_Step_By_Step example and found no way forward given that no other partitions turned up) I have run gpart and found this: /sda1 - 15 GB /sda2 - system reserved /sda3 - 70.15 GB /sda4 - extended 212.84 unallocated - 209.10 /sda5 - unknown 3.74 . I have been told I can recover the partition using gparted's Rescue start end command, but I don't know what to enter for start and end. [--EDIT: TestDisk Deeper Search stated that "the following partitions can't be recovered" and listed a 220-GB Linux partition 6 times. Then it stated that "The current number of heads per cylinder is 255 but the correct value may be 128" and I could try to change it in the Geometry menu (because apparently these are overlapping partitions) So should I do that?--]

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Chromebook C720 - issue suspending and booting

  - by user72727

  I recently bought an Acer C720 chromebook (Celeron, 2GB RAM, 16GB SSD) with the intention of loading Linux and using it as a cheap development laptop while on my holiday. The installation sort of went ok but initially the trackpad didn't work so I ran a script that mostly fixed that. My current issues are: Booting: it still goes to the chrome "unknown os" white screen - I have to press ctrl L - then escape then 1 then wait for 30 secs while it seems to be searching for something. Then Ubunto loads up fine. Any idea how to fix this? Suspend: if I close the lid of the laptop then it doesn't seem to suspend properly. At least when I open the lid the screen appears to be on but the screen is blank with a cursor. Nothing responds on the keyboard and I have to hold the power down to restart it. The suspend from the top menu has the same issue. Moving windows: I don't have a mouse click button so how do I move windows around the screen? Launcher bar: I've set mine to auto hide (which it does) but what exactly do you have to do to get it back? I just repeatedly jab the mouse at the side of the screen and eventually it pops up. I don't mind starting all over again but obviously a quick fix is preferred ;) Mike Ubunto 14.04.1 LTS Kernel 3.13.0-32-generic PS Sorry for so many questions.

  Read the article

• Methodology To Determine Cause Of User Specific Error

  - by user3163629

  We have software that for certain clients fails to download a file. The software is developed in Python and compiled into an Windows Executable. The cause of the error is still unknown but we have established that the client has an active internet connection. We suspect that the cause is due to the clients network setup. This error cannot be replicated in house. What technique or methodology should be applied to this kind of specific error that cannot be replicated in house. The end goal is to determine the cause of this error so we can move onto the solution. For example; Remote Debugging: Produce a debug version of the software and ask the client to send back a debug output file. This involves alot of time (back and forth communication) and requires the client to work and act in a timely manor to be successful. In-house debugging: Visit the client and determine their network setup, etc. Possibly develop a series of script tests before hand to run on the clients computer under the same network. Other methodologies and techniques I am not aware of?

  Read the article

• Project freezed - what should I leave to the people after me?

  - by Maistora

  So the project I've been working on is now going to be freezed for unknown period of time. May be when the project unfreezes it won't be assigned to me or anybody of the current team. Actually we did also inherit the project after it had been freezed but there was nothing left by the team before us to help us understand even the basic needs of the project, so plenty of time passed by until we got to know the project well. My question is what do you think we should do to help people after us to best understand the needs of the project, what we have done, why we've done it, etc. I am open to other ideas of why should we leave some tracks to the others that will work on this project also. Some steps we already have taken: technical documentation (not full but at least there is some); source-control system history; estimations on which parts of the project need improvement and why we think so; bunch of unit tests. What do you think of what we've already prepared and what else could we do?

  Read the article

• A "tinkered" PC can ping by IP, not by hostname. How to fix?

  - by aitchnyu

  Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Are the only types of data "sources" static and dynamic?

  - by blunders

  Thinking that there might be others, but not sure -- but before getting into that, let me explain what I mean by static and dynamic data sources. Static (or datastore) - Meaning that the data's state is non-changing, and if was changed, that would be a new state, and the old data would be considered stateless; meaning it no longer is known to exist, or not exist. Another way of possibly looking at a static data source might be that if read and written back without modification, the checksum for before and after should be exactly the same regardless of the duration of time between the reading and rewriting of the data. Examples: Photos, Files, Database Record, Dynamic (or datastream) - Meaning that the data's state is known to be in flux, and never expected to be the same per input. Example: Live video/audio feed, Stock Market feed, First let me say, the above is a very loose mapping of the concepts, and I'd welcome any feedback. Next, onto the core of the question, that being are these the only two types of data sources. My guess, is that yes, they are -- but that there are hybrid versions of the two. That being, streaming data that has a fixed state. For example, the data being streamed has a checksum given and each unique checksum is known to be a single instance of static data. On the flip side, static data could be chained via say a version control system; when played back, each version might be viewed as a segment of a stream; thing is, the very fact that it can be played back makes the data source static. Another type might be that the data source is being organically discovered, and it's simply unknown what the state is. Questions, feedback, requests -- just comment, thanks!!

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Do large number of internal broken links affect SEO?

  - by TheBigK

  We've a WordPress blog and had disqus plugin in stalled for several months. Around late August this year, the plugin created a ton of URLs that linked to non-existent location on our website. For example - Correct URL: domain.com/correct-URL/ Disqus created - domain.com/correct-URL/344322/ - Throws 404 domain.com/correct-URL/433466/ - Throws 404 So essentially, Google found a LARGE number of broken links that pointed to unknown locations on our own domain. As the count of those errors (404) rose, our site suffered massive drop in traffic and crawl rate dropped to 10% of what it was earlier. I wish to know - Can large number of (we've over 99k of them) internal broken links cause rankings to drop? I've fixed the issue in one go by creating 301 redirects for each bad URL to correct URL and removing disqus. Google however drops the count by ~1000 daily, as I mark errors as 'fixed' in Google Webmaster Tools. Is there any way to speed this up? Should I setup custom crawl rate to 'Fast' in GWT to make Google crawl our website faster? I'd appreciate your inputs and experience sharing.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >