Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 113/808 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Some notebooks can connect to internet via certain wireless router, some can't

  - by Nathaniel

  I take a class in the building of a business and we sometimes use their internet via Wi-Fi. In the last few weeks, though, some notebooks haven't been able to connect to the internet even though they are connected to the router. It affected first a few of us and then all of us. Last week I tweaked around the network settings on the router (yes, the admin password is the same as the network key) and even moved the internet cable on the router from port 1 to the internet port. None of this really worked so I put things more or less back as I found them and alerted someone that someone who knew more than me had better have a look at the router. So, I don't know if anybody has had a look at it but now 2 of us can again connect to the internet. I had a look at the router settings last week and I really couldn't see what might be creating this issue. What might be the problem?

  Read the article

• What kernel modules are required for wi-fi to work?

  - by Leonid Shevtsov

  My custom-built 2.6.32 kernel cannot connect to any WPA-protected network. The kernel includes (probably?) everything that should be needed for wifi, including IPv4 network support (IPv6 is disabled), the ath5k wireless driver (which is used in the generic Ubuntu 2.6.31 kernel) and all crypto APIs. The card is being detected, however, iwlist scan returns wlan0 Failed to read scan data : Network is down and network-manager log says <info> (wlan0): driver supports SSID scans (scan_capa 0x01). <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k') <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 <info> (wlan0): now managed <info> (wlan0): device state change: 1 -> 2 (reason 2) <info> (wlan0): bringing up device. <info> (wlan0): preparing device. <info> (wlan0): deactivating device (reason: 2). supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed <info> modem-manager is now available <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files <info> Trying to start the supplicant... <info> (wlan0): supplicant manager state: down -> idle <info> (wlan0): device state change: 2 -> 3 (reason 0) <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. The exact same configuration works with the generic kernel. Is anything except wifi and crypto api needed for wi-fi to work?

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• NetworkManager broken after upgrade to Kubuntu Saucy

  - by queueoverflow

  I had Kubuntu 13.04 on my ThinkPad X220, and I upgraded to 13.10 and I am not able to connect to a wired or wireless connection. The new network tray icon does not show any entries at all. In the menu of the tray icon, there is an error saying: Require NetworkManager 0.9.8, found . I then tried the following: nmcli con ** (process:3695): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 3 matched rules; type="method_call", sender=":1.64" (uid=1000 pid=3695 comm="nmcli con ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=1116 comm="NetworkManager ") Error: nmcli (0.9.8.0) and NetworkManager (unknown) versions don't match. Force execution using --nocheck, but the results are unpredictable. nmcli dev ** (process:3700): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 3 matched rules; type="method_call", sender=":1.65" (uid=1000 pid=3700 comm="nmcli dev ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=1116 comm="NetworkManager ") Error: nmcli (0.9.8.0) and NetworkManager (unknown) versions don't match. Force execution using --nocheck, but the results are unpredictable. nm-tool ** (process:3705): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 3 matched rules; type="method_call", sender=":1.66" (uid=1000 pid=3705 comm="nm-tool ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=1116 comm="NetworkManager ") NetworkManager Tool State: unknown ** (process:3705): WARNING **: error: could not connect to NetworkManager Running those as root works, however. I was also able to run nmcli con up id DHCP which got my DHCP connection working and giving me internet access. That did not work using a Wifi connection though, and I do need those. How can I get networking back to work without a reinstall?

  Read the article

• 5 Advanced Wi-Fi Network Security Tips

  Go beyond the basics of WEP vs. WPA and boost your wireless network security. You&#146;ll sleep better for it.

  Read the article

• Fail to access Network options

  - by Konstantinos Marinis

  I am trying to use OpenDNS for my newly installed Ubuntu 12.10... However I cannot insert custom DNS addresses... I am accessing Network, then at my wireless connection, no matter how many times I press the "options" tab at the low right corner (I am not using english Ubuntu, so the button might have a different name), nothing happens. Any ideas why or how should I configure my OpenDNS connection?

  Read the article

• C#.NET framework 3.5 SP1: satellite assemblies and FullTrust issues when the exe is on the network.

  - by leo

  Hi, I'm executing my .NET app from a network share. Since framework 3.5 SP1, and as explained here: http://blogs.msdn.com/shawnfa/archive/2008/05/12/fulltrust-on-the-localintranet.aspx, the main exe and all the DLLs located in the same folder (but not subfolders) are granted with FullTrust security policy. My problem is that I have subfolders for satellite assemblies with localized strings. Namely, I have: 1) FOLDER\APP.EXE 2) FOLDER\A whole bunch of DLLs 3) FOLDER\LANGUAGE1\Satellite assemblies 4) FOLDER\LANGUAGE2\Satellite assemblies 1 and 2 are automatically granted with FullTrust. 3 and 4 are not and my application is really slow because of that. Is there a way to grant 3 & 4 FullTrust security policy at runtime, since the application running has FullTrust? If not, is there a clean way to have satellite assemblies merged into only one DLL? Thanks a lot.

  Read the article

• How to convert the output of an artificial neural network into probabilities?

  - by Mathieu Pagé

  I've read about neural network a little while ago and I understand how an ANN (especially a multilayer perceptron that learns via backpropagation) can learn to classify an event as true or false. I think there are two ways : 1) You get one output neuron. It it's value is 0.5 the events is likely true, if it's value is <=0.5 the event is likely to be false. 2) You get two output neurons, if the value of the first is than the value of the second the event is likely true and vice versa. In these case, the ANN tells you if an event is likely true or likely false. It does not tell how likely it is. Is there a way to convert this value to some odds or to directly get odds out of the ANN. I'd like to get an output like "The event has a 84% probability to be true"

  Read the article

• Ubuntu problem not connecting to wireless or wired network

  - by ToughPal

  I recently installed openvpn and things were working. But I got a weird screen after a few hours and on restart my wired and wireless connections are not working. Can someone help? cat /etc/network/interfaces auto lo iface lo inet loopback cat /etc/resolv.conf #Generated by NetworkManager Is there anything missing? I tried both wired and wireless and both are not working. Usually if I ever have a problem with wireless, the wired always work! My /etc/network/interfaces is looking wrong. Can you please send me yours? I am using ubuntu 9.10 and the internet was working correctly until today! Please help

  Read the article

• Good way to send a large file over a network in C#?

  - by BFreeman

  I am trying to build an application that can request files from a service running on another machine in the network. These files can be fairly large (500mb + at times). I was looking into sending it via TCP but I'm worried that it may require that the entire file be stored in memory. There will probably only be one client. Copying to a shared directory isn't acceptable either. The only communication required is for the client to say "gimme xyz" and the server to send it (and whatever it takes to ensure this happens correctly). Any suggestions?

  Read the article

• Best neural network for certain type of pattern analysis?

  - by fred basset

  Hi All, I'm working on a system that will send telemetry data on machine operation back to a central server for analysis. One of the machine parameters we're measuring is motor current drawn vs time. After an operation is finished we plan to send back an array of currents vs time to the server. A successful operation would have a pattern like a trapezoid, problematic operations would have a pattern completely different, more like a large spike in values. Can anyone recommend a type of neural network that would be good at classifying these 1D vectors of current values into a pass/fail type output? Thanks, Fred

  Read the article

• Networking is disabled after installing Maverick

  - by Zifre

  I recently installed Ubuntu 10.10 (Maverick Meerkat). Everything was working fine. Then I just started up the computer again, and the networking doesn't work. The network manager applet says "Networking disabled". The button is disabled, so I can't enable it. This question seems to be basically the same issue I have. managed in was set to false, but changing it to true does not fix the problem. Is there any other way to fix this problem?

  Read the article

• Networking is disabled after installing Maverick

  - by Zifre

  I recently installed Ubuntu 10.10 (Maverick Meerkat). Everything was working fine. Then I just started up the computer again, and the networking doesn't work. The network manager applet says "Networking disabled". The button is disabled, so I can't enable it. This question seems to be basically the same issue I have. managed in was set to false, but changing it to true does not fix the problem. Is there any other way to fix this problem?

  Read the article

• Intermittent loss of internet connectivity with good wireless signal

  - by rsheart

  I recently bought a HP touch smart running windows 7. At random times, internet connectivity is lost while the wireless signal remains strong. The only way to restore connectivity is to restart the PC. Nothing else works. Have many other PC's on the same router also running windows 7 and no problems there. Have changed routers and problem remains. I have reinstalled the network drivers with no help. Any thoughts?

  Read the article

• Can I share a TV card?

  - by Boris

  My environment: 2 PCs, a desktop and a laptop, both on Oneiric they are connected together by ethernet wire nfs-common is installed and configured: the desktop is the server a TV tuner card is installed on the desktop, I can watch TV with the software Me-TV It works fine, TV on desktop, and my network too: I share folders thanks to NFS. But I would like more: How can I share my TV tuner card from the desktop and be able to watch TV on the laptop too? If possible I would like a solution that allows me to keep using the software Me-TV, on both PCs. I bet that there is a solution to create a fake TV card on the 2nd PC with xNBD. I'm trying xnbd-server --target /dev/dvb/adapter0/demux0 but I cant make it work. Trying to understand some examples of xNBD command lines, it seems to be meant only for sharing disk player. If someone as ever used xNBD, he's welcome.

  Read the article

• Dell Vostro 1000 audio and wireless NIC drivers

  - by Ssvarc

  I have a Dell Vostro 1000 laptop with a fresh XP Pro install. I'm trying to track down the correct audio and wireless NIC drivers. I've used this Dell support driver page, but the drivers it gives for the service tag and XP OS don't work. Anyone have links to the correct, working drivers?

  Read the article

• Share NTFS partitions on a Mac-based wireless network

  - by amit

  I have a hackintosh and a MacBook running on a wireless network. The hackintosh is the data repository (sort-of) and I want to use the MacBook to easily access data from the hackintosh. but to my surprise I am only able to share the apple partitions. The NTFS partitions are not appearing for sharing even though I have lined them up for sharing from my hackintosh...

  Read the article

• How to enable true remote login

  - by Scán

  I don't quite know how these things are called, so a search did not product any help. I've got two computers, a desktop and a netbook. The netbook is really weak, and there's hardly any fun doing work with it, especially after ubuntu software swallows so much cpu power for nothing. But my desktop is good, but uncomfortably positioned. So I know you can use any linux system as a server to give logins. I want to be able to login and work on my desktop, from my netbook. No VNC, no SSH, full X-server, I want to be able to choose "Login on Desktop" in my login menu on the netbook and have everything as if I was there. I hope I could make my point. Is it possible in a local network? And if so, how can I easily set it up?

  Read the article

• Managing a wireless internet connection

  - by cornjuliox

  I've just recently purchased a USB wi-fi adapter and have been using the software (for Windows XP) that comes with it to search for and connect to networks, but it's really quite slow and featureless. Are there free/OSS alternatives for Windows XP that can I can replace it with? Preferably something that can, in addition to connecting/searching for wireless networks, display stats like signal strength and transfer speeds on graphs so I can better monitor the quality of my connection?

  Read the article

• How do I fix DNS resolving which doesn't work after upgrading to Ubuntu 13.10 (Saucy)

  - by Witek

  After upgrade to 13.10 my DNS resolving fails. It seams the DNS servers which I get by DHCP (LAN) are not used. I could temporary solve the problem by adding nameserver 8.8.8.8 to /etc/resolv.conf. But then the intranet hosts still can not be resolved. When clicking on the Connection Information menu item on the network indicator, the Primary DNS and the Secondary DNS are set correctly. But my computer seams not to use them. So my questions: What should I put into resolv.conf, if anything? How to find out, which name servers my computer is querying? Where to look next, to find out, why name servers received by DHCP are not used?

  Read the article

• Networkmanager in systray gone and sound not working after update 13.10

  - by rubo77

  After upgrading my Xubuntu 13.04 to 13.10 I have no sound. I still have sound if I start VLC with sudo mpg123 test.mp3 So it seemd there is a right problem EDIT after adding myself to the group audio with adduser myself audio I could play sounds again from the desktop with VLC But one problem remaining: The systray, usually looking like this: is not working anymore. No audio-settings and no network-manager in the taskbar in XFCE: there is just one small box with nothing in it. When I install stalonetray, There I see the status of wicd and all the other statuses, so the systray seems to be broken.

  Read the article

• Jquery website is not opening in UBUNTU but in XP, Everything is fine

  - by Raman Sethi

  I know it is weird, But I just discovered this, jquery.com is not opening in my ubuntu firefox or other KDE browser and hence many sites that copy codes from code.jquery.com also hanged. Is there any solution to this problem. I have found the problem It is actually with the DNS servers I am using, Google DNS, 8.8.8.8 and 8.8.4.4, whenever I use these DNS in ubuntu my system stop responding to some sites, actually they are connected nicely, but the request end up in waiting.. I dont understand why...??? I checked my DNS with cat /etc/resolv.conf Even after using Google DNS, it is showing DNS servers I received automatically after connecting to the service provider. I am connecting using Network Manager, not using DNS I provided but using the default one. Any Solution??

  Read the article

• How to set up bridged networking in Xen?

  - by Joe Carr

  I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

  Read the article

• Internet Connectivity Indicicator on Unity

  - by Sathish

  How can I check whether my internet connection is active on Ubuntu. If I am connected to a wired or wi-fi network, the indicator applet shows that I'm connected. But there is now way to find out the internet is working or not. I have some problem in my internet connectivity and I frequently lose my connection. I found this link is useful Internet connectivity indicator applet But I don't know that where should I use this code! #!/bin/bash if ping -c 1 -W 2 google.com > /dev/null; then echo "Up" else echo "Down" fi

  Read the article

• Is it possible to auto-mount sshfs

  - by Mark D

  Is it possible to auto-mount a remote FS using sshfs upon instantiating a proper VPN connection? Allow me to explain the scenario, I'm working remotely, to do that it helps if I can mount my home dir from a server in the office. To do that I need to vpn in. So within network manager I select the relevant VPN and connect. It connects but now I have to drop to the command line and mount my home dir on several machines. If I forget to do one machine my local dev environment isn't as efficient. I suppose I could write a quick bash script to do this but I'd rather get it running automatically when I connect.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >