dev center - Page 114 - Developer IT

Kernel panic on reboot after failed logical volume resize

- by Derek

I attempted to do a logical volume resize yesterday using the follwoing commands $sudo pvdisplay "/dev/sda8" is a new physical volume of "113.11 GiB" --- NEW Physical volume --- PV Name /dev/sda8 VG Name PV Size 113.11 GiB Allocatable NO PE Size 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID jwyO1o-b2ap-CW51-kx7O-kf26-arim-SM8V6m $sudo vgextend vg /dev/sda8 sudo vgdisplay vg --- Volume group --- VG Name vg System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 5 Open LV 5 Max PV 0 Cur PV 2 Act PV 2 VG Size 131.74 GiB PE Size 4.00 MiB Total PE 33725 Alloc PE / Size 4769 / 18.63 GiB Free PE / Size 28956 / 113.11 GiB VG UUID AhusW2-pzFv-3W32-mpv2-s5VG-FN7S-kVSadx $sudo lvresize -L +20GB /dev/mapper/vg-var So as you can see, it looks like adding the physical volume to the vg worked, because i see free space available there. When I typed the lvresize command, it never returned. I let this run overnight in the background, but this morning I still couldnt successfully do a "pvdisplay" or "lvdisplay" because I think it was waiting on a lock or something, so the command never returned. When i went to log onto the server's console, I saw a bunch of messages like: rcu_sched_state detected stall on cpu 2 Now when I boot, I get a kernel panic error, and a message about not being able to mount /mapper/vg-root cannot open root device "mapper/vg-root" or unknown_block(0,0) Kernel Panic -not syncing: VFS: Unable to mount root file system on unknown_block(0,0) What should I do to get my system back up and running? Did I attempt to do the logical volume resize correctly? Thanks

Read the article

Help in decide the partition to install ubuntu

- by G.Ashwin kumar

I have a PC running with windows 7 ultimate 64 bit version with 4 gig Ram. I have a 320 gig hard disk , in which I have allocated 120 gig for windows 7, 100 gig for NY files(named ashwin in windows) and rest 80-90 gig partitioned but empty NTFS partition.Now where do I install Ubuntu so that windows and data is safe. I got the option install with windows I selected it , it then shows select drive(SCSI1 (0,0,0) (sda) -320.1 GB ATA WDC WD3200AAJS-6) and allocate driver by dragging the divider below which shows 66.5gb and 59.3 GB respectively. Which one do I go with? I clicked advance partitioning it shows five devices: device , type, m.point ,size.(mb), used(mb)......... /dev/sda1, NTFS, 104 , 35 (windows 7 loader) /dev/sda2, NTFS, 104752, 23604 /dev/sda3, NTFS, 125829, 10161 /dev/sda5, NTFS, 89382, 3221 when I checked size in properties it showed name of drive according to windows, used.Gb, free, total. ashwin, 10.2, 115.7, 125.8 c drive, 23.6, 81.1, 104.8 new volume, 92.6mb, 89.3, 89.4 except mentioned everything in gigabytes.ignore the last dots. I want to install it in new volume or using that space how do I do it? Explain in detail I'm a beginner.

Read the article

Recovering data from /

- by Abhijit Gavas

I accidentally installed Ubuntu to one of my data drives from Windows. The drive was a NTFS drive and contained about 80 GB of important data. The size of the drive is 110 GB. Its new file system is ext4. In an attempt to recover the data, I downloaded foremost and tried the following commands: foremost -i / -o /media/281C8DB01C8D7998/Recovery/ -T -v foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v (sda7 is the drive in question.) It appears that with either command, foremost gets stuck reading some file. Here is the console output: abhi@abi-PC:/dev$ foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Foremost version 1.5.7 by Jesse Kornblum, Kris Kendall, and Nick Mikus Audit File Foremost started at Fri Sep 28 20:58:00 2012 Invocation: foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Output directory: /media/281C8DB01C8D7998/Recovery_Fri_Sep_28_20_58_00_2012 Configuration file: /etc/foremost.conf Processing: stdin |------------------------------------------------------------------ File: stdin Start: Fri Sep 28 20:58:00 2012 Length: Unknown Num Name (bs=512) Size File Offset Comment Killed As you can see I have to kill it from system monitor. This approach does not seem to be working. What else could I try to recover the files? Please help. The files are very important and I will be devastated if I cannot recover them.

Read the article

Proper updating of GeoClipMaps

- by thr

I have been working on an implementation of gpu-based geo clip maps, but there is a section of the GPU Gems 2 article that i just can't seem to understand, specifically this paragraph and more precisely the bolded part: The choice of grid size n = 2k-1 has the further advantage that the finer level is never exactly centered with respect to its parent next-coarser level. In other words, it is always offset by 1 grid unit either left or right, as well as either top or bottom (see Figure 2-4), depending on the position of the viewpoint. In fact, it is necessary to allow a finer level to shift while its next-coarser level stays fixed, and therefore the finer level must sometimes be off-center with respect to the next-coarser level. An alternative choice of grid size, such as n = 2k-3, would provide the possibility for exact centering Let's take an example image from the article: My "understanding" of the way the clip maps were update was that you floor the position of the viewpoint to an int, and such get the center vertex point if this is not the same as the previous center point, you update the entire map. Now, this obviously is not the case - but what I am failing to understand is this: If you look at the image above, if the viewpoint was to move one unit to the right, then the inner ring (the one just around the view point + white center square) would end up getting a 1 unit space on both the left and right side of itself. But there is nothing in the paper that deals with this, what i mean is that it would end up looking like this (excuse my crummy cut-and-paste editing of the above image): This is obviously not a valid state of the. So, would the solution be that a clip ring (layer) can only move in increments of the ring/layer it's contained within? Wouldn't this end up being very restrictive? I feel like I am missing some crucial understanding of parts of the algorithm, but I have been over both this paper and the original paper from 2004 and I just can't see what I am not getting.

Read the article

Unable to mount NTFS Partition after resizing

- by sam

I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

Read the article

Restoring GRUB2 on Software RAID 0 using LiveCD after Windows 7 wiped it

- by unknownthreat

I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

Read the article

Installing BURG (NO MBR!)

- by StepTNT

I'd like to install BURG but I don't want it to overwrite my MBR. That's because I've got two bootloader in my system : 1) Default Windows 7 bl in my MBR 2) Grub in /dev/sda2 With the first power button, it will boot as Grub is not installed, so it simply loads Windows, with the second button it boots from /dev/sda2, loading Grub and then Kubuntu. Now I want to replae Grub with Burg. I've installe Burg with burg-install /dev/sda2 --force because I don't want my MBR to be overwritten (pressing the first power button MUST load Windows and avoid showing any sign of Linux things). Setup was completed without errors, and everything seems to work fine : if I open burg-manager it loads my settings, allowing me to change them and to test everything with burg-emu (that works as I want to). So, everything seems fine, Burg's installed, I've changed my settings but.. If I use the second power button, it still loads Grub! (Even a different version from the default Kubuntu one). So, here's the question : How can I replace GRUB that's on /dev/sda2 with BURG and WITHOUT writing it to my MBR? Thanks :)

Read the article

All files on automounted NTFS partition are marked as executable

- by MHC

I have set up an NTFS partition to automount via fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda7 during installation UUID=e63fa8a2-432f-4749-b9db-dab328807d04 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda4 during installation UUID=e9ad1bb4-7c1f-4ea9-a6a5-799dfad71c0a /boot ext4 defaults 0 2 # /home was on /dev/sda8 during installation UUID=eda8c755-5448-4de8-b58c-9cb75823c22d /home ext4 defaults 0 2 # swap was on /dev/sda9 during installation UUID=804ff3a7-e5dd-406a-b63c-e8f3c635fbc5 none swap sw 0 0 #Windows-Partition UUID=368CEBC57807FDCD /media/Share ntfs defaults,uid=1000,gid=1000,noexec 0 0 As you can see I have added the noexec bit to the configuration. Why? Because any file I create on or move to the partition is automatically marked as executable. The problem is that there is no way of changing that through nautilus. I cannot uncheck the "Allow executing file as program" option. The noexec option doesn't help, unfortunately. It only prevents nautilus from displaying the "run" or "read" dialog but doesn't change the executable flag. Is there any way I can fix this?

Read the article

How to access a fake raid?

- by maaartinus

I have a fake raid, which I wanted to access using mdadm /dev/md0 -A -c 128 -l stripe --verbose /dev/sda /dev/sdc which should be right, as far as I understand the man page. But I get the message mdadm: option -l not valid in assemble mode leaving the offending option out leads to mdadm: failed to create /dev/md0 and (despite verbose) no more information. I'm assuming that -A requires some mdadm-specific header which is obviously missing. I probably need to use "build" instead of assemble, but from the description I'm really unsure whether this is a non-destructive operation. Is it? What should I exactly do? UPDATE I see I haven't made clear, that the array already exists as a fake-raid (I can't give the details about my mainboard now). It looks like doing nothing except for interleaving blocks, so I hoped it could be easily done using mdadm, too. Maybe I'm completely wrong, but all the info I've found was concerned with booting from fake-raid, what I don't really need. I'd be happy with a read access for now.

Read the article

How do I understand the partition table? (I want to start over.)

- by Sammy Black

I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

Read the article

Repair ext4 filesystem on USB drive

- by phineas

Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

Read the article

Ubuntu Server 11.10 boot, white terminal with garbled black text

- by SpeedCrazy

I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

Read the article

CCSpriteHole in cocos2d 2.0?

- by rakkarage

i was using this cocos2d class CCSpriteHole in cocos2d 1.0 fine... http://jpsarda.tumblr.com/post/15779708304/new-cocos2d-iphone-extensions-a-progress-bar-and-a i am trying to convert it to cocos2d 2.0... i got it to compile by changing glVertexPointer to glVertexAttribPointer like in the 2.0 version of CCSpriteScale9 here http://jpsarda.tumblr.com/post/9162433577/scale9grid-for-cocos2d and changing contentSizeInPixels_ to contentSize_... -(id) init { if( (self=[super init]) ) { opacityModifyRGB_ = YES; opacity_ = 255; color_ = colorUnmodified_ = ccWHITE; capSize=capSizeInPixels=CGSizeZero; //Not used blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; // update texture (calls updateBlendFunc) [self setTexture:nil]; // default transform anchor anchorPoint_ = ccp(0.5f, 0.5f); vertexDataCount=24; vertexData = (ccV2F_C4F_T2F*) malloc(vertexDataCount * sizeof(ccV2F_C4F_T2F)); [self setTextureRectInPixels:CGRectZero untrimmedSize:CGSizeZero]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture rect:(CGRect)rect { NSAssert(texture!=nil, @"Invalid texture for sprite"); // IMPORTANT: [self init] and not [super init]; if( (self = [self init]) ) { [self setTexture:texture]; [self setTextureRect:rect]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture { NSAssert(texture!=nil, @"Invalid texture for sprite"); CGRect rect = CGRectZero; rect.size = texture.contentSize; return [self initWithTexture:texture rect:rect]; } -(id) initWithFile:(NSString*)filename { NSAssert(filename!=nil, @"Invalid filename for sprite"); CCTexture2D *texture = [[CCTextureCache sharedTextureCache] addImage: filename]; if( texture ) return [self initWithTexture:texture]; return nil; } +(id)spriteWithFile:(NSString*)f { return [[self alloc] initWithFile:f]; } - (void) dealloc { if (vertexData) free(vertexData); } -(void) updateColor { ccColor4F color4; color4.r=(float)color_.r/255.0f; color4.g=(float)color_.g/255.0f; color4.b=(float)color_.b/255.0f; color4.a=(float)opacity_/255.0f; for (int i=0; i<vertexDataCount; i++) { vertexData[i].colors=color4; } } -(void)updateTextureCoords:(CGRect)rect { CCTexture2D *tex = texture_; if(!tex) return; float atlasWidth = (float)tex.pixelsWide; float atlasHeight = (float)tex.pixelsHigh; float left,right,top,bottom; left = rect.origin.x/atlasWidth; right = left + rect.size.width/atlasWidth; top = rect.origin.y/atlasHeight; bottom = top + rect.size.height/atlasHeight; // // |/|/|/| // CGSize capTexCoordsSize=CGSizeMake(capSizeInPixels.width/atlasWidth, capSizeInPixels.height/atlasHeight); // From left to right //Top band // Left vertexData[0].texCoords=(ccTex2F){left,top}; vertexData[1].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[2].texCoords=(ccTex2F){left+capTexCoordsSize.width,top}; vertexData[3].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[4].texCoords=(ccTex2F){right-capTexCoordsSize.width,top}; vertexData[5].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[6].texCoords=(ccTex2F){right,top}; vertexData[7].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Center band // Left vertexData[8].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[9].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[10].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[11].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[12].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[13].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[14].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; vertexData[15].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Bottom band //Left vertexData[16].texCoords=(ccTex2F){left,bottom}; vertexData[17].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[18].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom}; vertexData[19].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Center vertexData[20].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom}; vertexData[21].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Right vertexData[22].texCoords=(ccTex2F){right,bottom}; vertexData[23].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; } -(void) updateVertices { float left=0; //-spriteSizeInPixels.width*0.5f; float right=left+contentSize_.width; float bottom=0; //-spriteSizeInPixels.height*0.5f; float top=bottom+contentSize_.height; float holeLeft=holeRect.origin.x*CC_CONTENT_SCALE_FACTOR(); float holeRight=holeLeft+holeRect.size.width*CC_CONTENT_SCALE_FACTOR(); float holeBottom=holeRect.origin.y*CC_CONTENT_SCALE_FACTOR(); float holeTop=holeBottom+holeRect.size.height*CC_CONTENT_SCALE_FACTOR(); // // |/|/|/| // // From left to right //Top band // Left vertexData[0].vertices=(ccVertex2F){left,top}; vertexData[1].vertices=(ccVertex2F){left,holeTop}; vertexData[2].vertices=(ccVertex2F){holeLeft,top}; vertexData[3].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[4].vertices=(ccVertex2F){holeRight,top}; vertexData[5].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[6].vertices=(ccVertex2F){right,top}; vertexData[7].vertices=(ccVertex2F){right,holeTop}; //Center band // Left vertexData[8].vertices=(ccVertex2F){left,holeBottom}; vertexData[9].vertices=(ccVertex2F){left,holeTop}; vertexData[10].vertices=(ccVertex2F){holeLeft,holeBottom}; vertexData[11].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[12].vertices=(ccVertex2F){holeRight,holeBottom}; vertexData[13].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[14].vertices=(ccVertex2F){right,holeBottom}; vertexData[15].vertices=(ccVertex2F){right,holeTop}; //Bottom band //Left vertexData[16].vertices=(ccVertex2F){left,bottom}; vertexData[17].vertices=(ccVertex2F){left,holeBottom}; vertexData[18].vertices=(ccVertex2F){holeLeft,bottom}; vertexData[19].vertices=(ccVertex2F){holeLeft,holeBottom}; // Center vertexData[20].vertices=(ccVertex2F){holeRight,bottom}; vertexData[21].vertices=(ccVertex2F){holeRight,holeBottom}; // Right vertexData[22].vertices=(ccVertex2F){right,bottom}; vertexData[23].vertices=(ccVertex2F){right,holeBottom}; } -(void) setHole:(CGRect)r inRect:(CGRect)totalSurface { holeRect=r; self.contentSize=totalSurface.size; holeRect.origin=ccpSub(holeRect.origin,totalSurface.origin); CGPoint holeCenter=ccp(holeRect.origin.x+holeRect.size.width*0.5f,holeRect.origin.y+holeRect.size.height*0.5f); self.anchorPoint=ccp(holeCenter.x/contentSize_.width,holeCenter.y/contentSize_.height); //[self updateTextureCoords:rectInPixels_]; [self updateVertices]; [self updateColor]; } -(void) draw { BOOL newBlend = NO; if( blendFunc_.src != CC_BLEND_SRC || blendFunc_.dst != CC_BLEND_DST ) { newBlend = YES; glBlendFunc( blendFunc_.src, blendFunc_.dst ); } glBindTexture(GL_TEXTURE_2D, [texture_ name]); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); if( newBlend ) glBlendFunc(CC_BLEND_SRC, CC_BLEND_DST); } -(void)setTextureRectInPixels:(CGRect)rect untrimmedSize:(CGSize)untrimmedSize { rectInPixels_ = rect; rect_ = CC_RECT_PIXELS_TO_POINTS( rect ); //[self setContentSizeInPixels:untrimmedSize]; [self updateTextureCoords:rectInPixels_]; } -(void)setTextureRect:(CGRect)rect { CGRect rectInPixels = CC_RECT_POINTS_TO_PIXELS( rect ); [self setTextureRectInPixels:rectInPixels untrimmedSize:rectInPixels.size]; } // // RGBA protocol // #pragma mark CCSpriteHole - RGBA protocol -(GLubyte) opacity { return opacity_; } -(void) setOpacity:(GLubyte) anOpacity { opacity_ = anOpacity; // special opacity for premultiplied textures if( opacityModifyRGB_ ) [self setColor: (opacityModifyRGB_ ? colorUnmodified_ : color_ )]; [self updateColor]; } - (ccColor3B) color { if(opacityModifyRGB_){ return colorUnmodified_; } return color_; } -(void) setColor:(ccColor3B)color3 { color_ = colorUnmodified_ = color3; if( opacityModifyRGB_ ){ color_.r = color3.r * opacity_/255; color_.g = color3.g * opacity_/255; color_.b = color3.b * opacity_/255; } [self updateColor]; } -(void) setOpacityModifyRGB:(BOOL)modify { ccColor3B oldColor = self.color; opacityModifyRGB_ = modify; self.color = oldColor; } -(BOOL) doesOpacityModifyRGB { return opacityModifyRGB_; } #pragma mark CCSpriteHole - CocosNodeTexture protocol -(void) updateBlendFunc { if( !texture_ || ! [texture_ hasPremultipliedAlpha] ) { blendFunc_.src = GL_SRC_ALPHA; blendFunc_.dst = GL_ONE_MINUS_SRC_ALPHA; [self setOpacityModifyRGB:NO]; } else { blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; [self setOpacityModifyRGB:YES]; } } -(void) setTexture:(CCTexture2D*)texture { // accept texture==nil as argument NSAssert( !texture || [texture isKindOfClass:[CCTexture2D class]], @"setTexture expects a CCTexture2D. Invalid argument"); texture_ = texture; [self updateBlendFunc]; } -(CCTexture2D*) texture { return texture_; } @end but now positioning and scaling seem to not work? and it starts in the wrong position... but changing the opacity still works. so i was wondering if anyone can see why my 2.0 version is not working? or if maybe there is a better way to do a sprite hole with cocos2d/opengl 2.0? shaders? thanks

Read the article

Existing laravel 4 project gives 404 in browser

- by Richard A

I'm trying to set up a development environment on a virtual machine running Ubuntu 14.04 LTS using Nginx and HHVM. To do this, I followed the tutorial here. This goes well with a new installation of Laravel. But when I import an existing Laravel 4 project and try to open that on my actual machine (which will serve as the client running Windows 7), I'm getting a 404 File Not Found error on the screen while connecting to http://sav.savrichard.dev. I did add this to the hosts file with the correct IP Address. The virtual machine is receiving the request and responds with a 404 error. How do I solve this error? I'm pretty new to Ubuntu so I'm not exactly sure what's wrong. The project is located at /var/www/sav.savrichard.net The server configuration is as follow: server { listen 80 default_server; root /var/www/sav.savrichard.net/public; index index.html index.htm index.php; server_name sav.savrichard.dev; access_log /var/log/nginx/localhost.sav.savrichard.dev-access.log; error_log /var/log/nginx/localhost.sav.savrichard.dev-error.log error; charset utf-8; location / { try_files \$uri \$uri/ /index.php?\$query_string; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { log_not_found off; access_log off; } error_page 404 /index.php; include hhvm.conf; # Deny .htaccess file access location ~ /\.ht { deny all; } } And the hhvm.conf file is: location ~ \.(hh|php)$ { fastcgi_keep_conn on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

Read the article

"Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

- by Pierre

I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

Read the article

Coordinate and positioning problem on iOS with cocos2d-x

- by Vexille

I'm using cocos2d-x alongside with Marmalade and running some tests and tutorials before starting an actual project with them. So far things are working reasonably well on the windows simulator, Android and even on Blackberry's Playbook, but on iOS devices (iPhone and iPad) the positioning seems to be off. To make things clearer, I put together a scene that just draws an image in the middle of the screen. It worked as expected on everything else, but this is the result I got on an iPhone: To get the coordinates for the center of the screen I'm using the VisibleRect class from the TestCpp sample. It just uses sharedOpenGLView to get the visible size and visible origin, and calculate the center from that. CCSprite* test = CCSprite::create("Ball.png", CCRectMake(0, 0, 80, 80) ); test->setPosition( ccp(VisibleRect::center().x, VisibleRect::center().y) ); this->addChild(test); Also I have a noBorder policy set on AppDelegate: CCEGLView::sharedOpenGLView()->setDesignResolutionSize(designSize.width, designSize.height, kResolutionNoBorder); One funny thing is that I tried to deploy the TestCpp sample project to some iOS devices and it worked reasonably well on the iPhone, but on the iPad the application was only being drawn on a small portion of the screen - just like what happened on the iPhone when I tried using the ShowAll policy.

Read the article

MySQL Workbench 5.2.43 GA released

- by Alfredo Kojima

The MySQL developer tools team announces the availability of version 5.2.43 of the MySQL Workbench GUI tool. This version contains various fixes and minor enhancements and includes 53 resolved bugs. With this version, Fedora 15 packages are replaced with Fedora 17. Also, Gatekeeper in Mac OS X Mountain Lion is now properly handled. For a full list of issues fixed in this release, see http://dev.mysql.com/doc/workbench/en/changes-5.2.x.html Please get your copy from our Downloads site. In Windows, you can also use the MySQL Windows Installer to update Workbench. Sources and binary packages are available for several platforms, including Windows, Mac OS X and Linux. http://dev.mysql.com/downloads/workbench/ Workbench Documentation can be found here. http://dev.mysql.com/doc/workbench/en/index.html Utilities Documentation can be found here. http://dev.mysql.com/doc/workbench/en/mysql-utilities.html If you need any additional info or help please get in touch with us. Post in our forums or leave comments on our blog pages. - The MySQL Workbench Team

Read the article

Ubuntu 12.04 takes too long to boot

- by msPeachy

I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

Read the article

Quitting a small start-up where you are a primary developer?

- by programmx10

Just curious to hear from other people who may have been in similar situations. I work for a small startup (very small) where I am the main developer for a major part of the app they are building, the other dev they have does a different area of work than I do so couldn't take over my part. I've been with the company 5 months, or so, but I am looking at going to a more stable company soon because its just getting to be too much stress, overtime, pressure, etc for too little benefit and I miss working with other developers who can help out on a project. The guy is happy with my work and I think I've helped them get pretty far but I've realized I just don't like being this much "on the edge" as its hard to tell what the direction of the company is going to be since its so new. Also, even though I'm the main dev for the project, I would still only consider myself a mid-level dev and am selling myself as such for the new job search. Just to add more detail, I'm not a partner or anything in the company and this was never discussed, so I just work on a W2 (with no benefits of course). I work at home so that makes it easier to leave, I guess, but I don't want to just screw the guy over but also don't want to be tied in for too long. Obviously I would plan to give 2 weeks notice at least, but should I give more? How should I bring up the subject because I know its going to be a touchy thing to bring up. Any advice is appreciated UPDATE: Thanks everyone for posting on this, I have now just completed the process of accepting an offer with a larger company and quitting the startup. I have given 2 weeks notice and have offered to make myself available after that if needed, basically its a really small company at this point so it would only be 1 dev that I would have to deal with... anyways, it looks like it may work out well as far as me maintaining a good relationship with the founder for future work together, I made it out to be more of a personal / lifestyle issue than about their flaws / shortcomings which definitely seems to help in leaving on a good note

Read the article

Restrict movement within a radius

- by Phil

I asked a similar question recently but now I think I know more about what I really want to know. I can answer my own question if I get to understand this bit. I have a situation where a sprite's center point needs to be constrained within a certain boundary in 2d space. The boundary is circular so the sprite is constrained within a radius. This radius is defined as a distance from the center of a certain point. I know the position of the center point and I can track the center position of the sprite. This is the code to detect the distance: float distance = Vector2.Distance(centerPosition, spritePosition)); if (distance > allowedDistance) { } The positions can be wherever on the grid, they are not described as in between -1 or 1. So basically the detecting code works, it only prints when the sprite is outside of it's boundary I just don't know what to do when it oversteps. Please explain any math used as I really want to understand what you're thinking to be able to elaborate on it myself.

Read the article

How can I install from a 9.04 live USB/DVD?

- by bstpierre

I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

Read the article

Issue with increasing the root partition from the swap

- by user211761

I have an issue with increase the size of my root partition. I have ElementaryOS Luna, and while installing it asked me how much space I want to use. I choosed 15 GB for it, because I want to use this as an alternative system. The issue is that after the installation was complete, I found out that my root partition is only 7 GB big, and SWAP is 8 GB which is useless cuz I have 8 GB of RAM. Now I want to shrink the swap and increase the size of my root partition, so I booted the LiveCD and used GParted. I shrinked the swap without any problems, but now I cant add that free space to any partition. I also turned Swap off. I would add a picture, but I need at least 10 reputation to post images ( Stupid ) Its also worth mentioning that in Gparted its showing my partition in a different way. I would post an image BUT I CANT, so I need to write it down. Its something like this [Pointing arrow down] /dev/sda4 Extended /dev/sda5 ntfs /dev/sda6 ext4 (Which is my main partition) /dev/sda7 linux-swap unallocated Picture:

Read the article

Re-installing Ubuntu without losing files, how to?

- by moraleida

Sometime back i bought a second PC to serve as my backup machine, but i've never managed to have it as i would like. Now i want to start over, but i've messed so much with it's disks that i'm kinda afraid to lose something on the way, thus this question. Right now, I have a 1Tb disk partitioned like this (as per GParted): /dev/sda1 (ext4) 346.12Gb - Is almost full, has an old install of Ubuntu 11.10. It no longer boots, ever since i installed Windows7 on /sda3. Everything that matters to me is tucked into /var/www/ all the rest can just go. /dev/sda2 (ext4) 196.45Gb - has an old install of 12.04 and nothing important, it's pretty much empty and also doesn't boot. /dev/sda3 (ntfs) 377.97Gb - is my boot partition with Windows 7, some important files and I'd like to keep it untouched. /dev/sda4 (extended) 10.97Gb - was created when i first installed Ubuntu, i think. In my ideal world, I'd like to safely reinstall Ubuntu from the 12.04 liveUSB and merge sda1 and sda2 without losing any files. Is that possible? How?

Read the article

h:commandButton not working within PrimeFaces p:dataTable

- by JamesB

I have a PrimeFaces datatable. For each row in this table, I want to allow the user to update/delete the row entry (a user). <html xmlns="http://www.w3.org/1999/xhtml" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:p="http://primefaces.prime.com.tr/ui"> <h:head> <link type="text/css" rel="stylesheet" href="themes/bluesky/skin.css" /> </h:head> <h:body> <center> <h:form> <p:panel id="viewUsersPanel" header="View Users"> <p:dataTable var="user" value="#{uController.users}" emptyMessage="No Users Found."> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="Name" /> </f:facet> <h:outputText value="#{user.name}" /> </p:column> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="Postal Address" /> </f:facet> <h:outputText value="#{user.address}" /> </p:column> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="Phone Number" /> </f:facet> <h:outputText value="#{user.phone}" /> </p:column> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="Email Address" /> </f:facet> <h:outputText value="#{user.email}" /> </p:column> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="DOB" /> </f:facet> <h:outputText value="#{user.dob}"> <f:convertDateTime pattern="dd-MMM-yyyy" /> </h:outputText> </p:column> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="No. Memberships" /> </f:facet> <h:outputText value="#{user.numberOfMemberships}" /> </p:column> <p:column style="text-align: center;"> <f:facet name="header"> <h:outputText value="Actions" /> </f:facet> <h:commandButton value="Update" action="#{uController.update}" /> <h:commandButton value="Delete" action="#{uController.delete}" /> </p:column> </p:dataTable> <h:panelGrid columns="2" cellpadding="2" id="footerPanelGrid" border="0"> <h:commandButton action="#{uController.home}" value="Home Page" /> </h:panelGrid> </p:panel> </h:form> </center> </h:body> </html> However, neither of the buttons work. Instead they appear to simply refresh the view page. I have ran the app in debug and neither update or delete method is hit. I suspect this may be due to using h:commandButton within a p:dataTable. However, I have also tried p:commandButton but to no avail. For reference, here is a snippet of the UserController class: @ManagedBean(name="uController") public class UserController extends AbstractController { private Collection<User> users; ... public String update() { System.out.println("Ready for update"); return "update-user"; } public String delete() { System.out.println("Ready for delete"); return "delete-user"; } ... }

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Search Results

Search found 13930 results on 558 pages for 'dev center'.

Page 114/558 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121 | Next Page >

- by Derek

- by G.Ashwin kumar

- by Abhijit Gavas

- by thr

- by sam

- by unknownthreat

- by StepTNT

- by MHC

- by maaartinus

- by Sammy Black

- by phineas

- by SpeedCrazy

- by rakkarage

- by Richard A

- by Pierre

- by Vexille

- by Alfredo Kojima

- by msPeachy

- by programmx10

- by Phil

- by bstpierre

- by user211761

- by moraleida

- by JamesB

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121 | Next Page >