Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 114/444 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

    - by Brian Stinar
    I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

    Read the article

  • Apt-Get Update: failure to fetch; can't connect to any sources

    - by weberc2
    I realize there are dozens of "apt-get update: failure to fetch" questions (I read through all I could find), but my present circumstance is unique to 12.04 and it affects all sources; not just launchpad. Additionally, I've tried several different servers in Europe and the U.S. as well as the "main server" (wherever that is) and they all yield the same result: I can't connect to any software sources. Additionally, I'm fairly certain the problem stems from the upgrade from 11.10-12.04 I performed this morning, as updates worked immediately before. Updates from the Update Manager worked fine and I could download some things (mutter) from the Software Center without incident, which makes me think I can connect to some subset of the Ubuntu servers (however, several other Ubuntu servers--like extras--and some canonical servers are listed as 'unable to connect'). Here is the output from sudo apt-get update: sudo apt-get update Ign http://ftp.u-picardie.fr precise InRelease Ign http://archive.canonical.com precise InRelease Ign http://ftp.u-picardie.fr precise-updates InRelease Ign http://ftp.u-picardie.fr precise-backports InRelease Err http://ftp.u-picardie.fr precise-security InRelease Err http://ftp.u-picardie.fr precise Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-updates Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-backports Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-security Release.gpg Unable to connect to ftp.u-picardie.fr:http: Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.canonical.com precise/partner i386 Packages Ign http://archive.canonical.com precise/partner TranslationIndex Ign http://dl.google.com stable InRelease Ign http://dl.google.com stable InRelease Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Ign http://extras.ubuntu.com precise InRelease Get:1 http://dl.google.com stable Release.gpg [198 B] Err http://extras.ubuntu.com precise Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) Ign http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Get:2 http://dl.google.com stable Release.gpg [198 B] Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Get:3 http://dl.google.com stable Release [1,347 B] Get:4 http://dl.google.com stable Release [1,347 B] Get:5 http://dl.google.com stable/main i386 Packages [1,268 B] Ign http://dl.google.com stable/main TranslationIndex Get:6 http://dl.google.com stable/main i386 Packages [769 B] Ign http://dl.google.com stable/main TranslationIndex Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Fetched 5,127 B in 7s (673 B/s) Reading package lists... Done W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/InRelease W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-updates/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-backports/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/precise/Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) W: Failed to fetch http://ppa.launchpad.net/caffeine-developers/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Some index files failed to download. They have been ignored, or old ones used instead. W: Duplicate sources.list entry http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_nemequ_sqlheavy_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_sgringwe_beatbox_ubuntu_dists_precise_main_binary-i386_Packages) Contents of /etc/apt/sources.list: # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release i386 (20111012)]/ oneiric main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security restricted main multiverse universe #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main Testing Alternate sources.list file These are the steps I followed to produce the following output: Please backup your sources.list: sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup and then replace the contents of /etc/apt/sources.list with the below lines and run apt-get update: deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner deb http://extras.ubuntu.com/ubuntu precise main Output: someone@someone-UBook:~$ sudo apt-get update Ign http://archive.canonical.com precise InRelease Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Ign http://archive.ubuntu.com precise InRelease Ign http://extras.ubuntu.com precise InRelease Ign http://archive.ubuntu.com precise-updates InRelease Hit http://archive.canonical.com precise/partner i386 Packages Hit http://extras.ubuntu.com precise Release.gpg Ign http://archive.ubuntu.com precise-backports InRelease Ign http://archive.canonical.com precise/partner TranslationIndex Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Hit http://extras.ubuntu.com precise Release Get:1 http://archive.ubuntu.com precise Release.gpg [198 B] Ign http://dl.google.com stable InRelease Err http://dl.google.com stable InRelease Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Get:2 http://archive.ubuntu.com precise-updates Release.gpg [198 B] Hit http://extras.ubuntu.com precise/main i386 Packages Get:3 http://archive.ubuntu.com precise-backports Release.gpg [198 B] Ign http://security.ubuntu.com precise-security InRelease Ign http://extras.ubuntu.com precise/main TranslationIndex Err http://extras.ubuntu.com precise/main Translation-en_US Unable to connect to extras.ubuntu.com:http: Err http://extras.ubuntu.com precise/main Translation-en Unable to connect to extras.ubuntu.com:http: Get:4 http://security.ubuntu.com precise-security Release.gpg [198 B] Get:5 http://archive.ubuntu.com precise Release [49.6 kB] Get:6 http://security.ubuntu.com precise-security Release [49.6 kB] Get:7 http://archive.ubuntu.com precise-updates Release [49.6 kB] Get:8 http://archive.ubuntu.com precise-backports Release [49.6 kB] Get:9 http://security.ubuntu.com precise-security/main i386 Packages [32.9 kB] Get:10 http://archive.ubuntu.com precise/main i386 Packages [1,274 kB] Get:11 http://security.ubuntu.com precise-security/restricted i386 Packages [14 B] Get:12 http://security.ubuntu.com precise-security/universe i386 Packages [8,594 B] Get:13 http://security.ubuntu.com precise-security/multiverse i386 Packages [1,393 B] Get:14 http://security.ubuntu.com precise-security/main TranslationIndex [73 B] Get:15 http://security.ubuntu.com precise-security/multiverse TranslationIndex [71 B] Get:16 http://security.ubuntu.com precise-security/restricted TranslationIndex [70 B] Get:17 http://security.ubuntu.com precise-security/universe TranslationIndex [72 B] Get:18 http://security.ubuntu.com precise-security/main Translation-en [13.6 kB] Get:19 http://security.ubuntu.com precise-security/multiverse Translation-en [587 B] Get:20 http://security.ubuntu.com precise-security/restricted Translation-en [14 B] Get:21 http://security.ubuntu.com precise-security/universe Translation-en [6,261 B] Get:22 http://archive.ubuntu.com precise/restricted i386 Packages [8,431 B] Get:23 http://archive.ubuntu.com precise/universe i386 Packages [4,796 kB] Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Get:24 http://ppa.launchpad.net precise Release.gpg [316 B] Get:25 http://ppa.launchpad.net precise Release.gpg [316 B] Get:26 http://ppa.launchpad.net precise Release.gpg [316 B] Ign http://ppa.launchpad.net precise Release.gpg Get:27 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:28 http://ppa.launchpad.net precise Release.gpg [316 B] Get:29 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:30 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:31 http://ppa.launchpad.net precise Release [11.9 kB] Get:32 http://ppa.launchpad.net precise Release [11.9 kB] Get:33 http://archive.ubuntu.com precise/multiverse i386 Packages [121 kB] Get:34 http://ppa.launchpad.net precise Release [11.9 kB] Ign http://ppa.launchpad.net precise Release Get:35 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://ppa.launchpad.net precise Release Hit http://archive.ubuntu.com precise/restricted TranslationIndex Get:36 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/universe TranslationIndex Get:37 http://ppa.launchpad.net precise Release [11.9 kB] Get:38 http://archive.ubuntu.com precise-updates/main i386 Packages [96.5 kB] Hit http://ppa.launchpad.net precise Release Get:39 http://ppa.launchpad.net precise Release [11.9 kB] Get:40 http://archive.ubuntu.com precise-updates/restricted i386 Packages [770 B] Hit http://ppa.launchpad.net precise Release Get:41 http://archive.ubuntu.com precise-updates/universe i386 Packages [27.7 kB] Get:42 http://ppa.launchpad.net precise/main Sources [524 B] Get:43 http://archive.ubuntu.com precise-updates/multiverse i386 Packages [1,393 B] Get:44 http://ppa.launchpad.net precise/main i386 Packages [507 B] Hit http://archive.ubuntu.com precise-updates/main TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://archive.ubuntu.com precise-updates/restricted TranslationIndex Get:45 http://ppa.launchpad.net precise/main Sources [932 B] Hit http://archive.ubuntu.com precise-updates/universe TranslationIndex Get:46 http://ppa.launchpad.net precise/main i386 Packages [1,017 B] Get:47 http://archive.ubuntu.com precise-backports/main i386 Packages [559 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:48 http://archive.ubuntu.com precise-backports/restricted i386 Packages [14 B] Get:49 http://archive.ubuntu.com precise-backports/universe i386 Packages [1,391 B] Get:50 http://ppa.launchpad.net precise/main Sources [1,402 B] Get:51 http://archive.ubuntu.com precise-backports/multiverse i386 Packages [14 B] Hit http://archive.ubuntu.com precise-backports/main TranslationIndex Get:52 http://ppa.launchpad.net precise/main i386 Packages [1,605 B] Hit http://archive.ubuntu.com precise-backports/multiverse TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted TranslationIndex Hit http://archive.ubuntu.com precise-backports/universe TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse Translation-en Get:53 http://ppa.launchpad.net precise/main Sources [931 B] Hit http://archive.ubuntu.com precise/restricted Translation-en Get:54 http://ppa.launchpad.net precise/main i386 Packages [1,079 B] Hit http://archive.ubuntu.com precise/universe Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/main Translation-en Hit http://ppa.launchpad.net precise/main Sources Hit http://archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://ppa.launchpad.net precise/main i386 Packages Hit http://archive.ubuntu.com precise-updates/restricted Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/universe Translation-en Get:55 http://ppa.launchpad.net precise/main Sources [3,611 B] Hit http://archive.ubuntu.com precise-backports/main Translation-en Get:56 http://ppa.launchpad.net precise/main i386 Packages [2,468 B] Hit http://archive.ubuntu.com precise-backports/multiverse Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted Translation-en Hit http://archive.ubuntu.com precise-backports/universe Translation-en Get:57 http://ppa.launchpad.net precise/main Sources [1,524 B] Get:58 http://ppa.launchpad.net precise/main i386 Packages [2,719 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://ppa.launchpad.net precise/main Sources Hit http://ppa.launchpad.net precise/main i386 Packages Ign http://ppa.launchpad.net precise/main TranslationIndex Get:59 http://ppa.launchpad.net precise/main Sources [1,052 B] Get:60 http://ppa.launchpad.net precise/main i386 Packages [1,388 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:61 http://ppa.launchpad.net precise/main Sources [1,185 B] Get:62 http://ppa.launchpad.net precise/main i386 Packages [1,698 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Err http://ppa.launchpad.net precise/main Sources 404 Not Found Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Fetched 6,699 kB in 15s (445 kB/s) Reading package lists... Done W: Failed to fetch http://dl.google.com/linux/talkplugin/deb/dists/stable/InRelease W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://dl.google.com/linux/chrome/deb/dists/sta

    Read the article

  • 12.04: Apt-Get Update: failure to fetch; can't connect to any sources

    - by weberc2
    I realize there are dozens of "apt-get update: failure to fetch" questions (I read through all I could find), but my present circumstance is unique to 12.04 and it affects all sources; not just launchpad. Additionally, I've tried several different servers in Europe and the U.S. as well as the "main server" (wherever that is) and they all yield the same result: I can't connect to any software sources. Additionally, I'm fairly certain the problem stems from the upgrade from 11.10-12.04 I performed this morning, as updates worked immediately before. Updates from the Update Manager worked fine and I could download some things (mutter) from the Software Center without incident, which makes me think I can connect to some subset of the Ubuntu servers (however, several other Ubuntu servers--like extras--and some canonical servers are listed as 'unable to connect'). Here is the output from sudo apt-get update: sudo apt-get update Ign http://ftp.u-picardie.fr precise InRelease Ign http://archive.canonical.com precise InRelease Ign http://ftp.u-picardie.fr precise-updates InRelease Ign http://ftp.u-picardie.fr precise-backports InRelease Err http://ftp.u-picardie.fr precise-security InRelease Err http://ftp.u-picardie.fr precise Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-updates Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-backports Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-security Release.gpg Unable to connect to ftp.u-picardie.fr:http: Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.canonical.com precise/partner i386 Packages Ign http://archive.canonical.com precise/partner TranslationIndex Ign http://dl.google.com stable InRelease Ign http://dl.google.com stable InRelease Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Ign http://extras.ubuntu.com precise InRelease Get:1 http://dl.google.com stable Release.gpg [198 B] Err http://extras.ubuntu.com precise Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) Ign http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Get:2 http://dl.google.com stable Release.gpg [198 B] Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Get:3 http://dl.google.com stable Release [1,347 B] Get:4 http://dl.google.com stable Release [1,347 B] Get:5 http://dl.google.com stable/main i386 Packages [1,268 B] Ign http://dl.google.com stable/main TranslationIndex Get:6 http://dl.google.com stable/main i386 Packages [769 B] Ign http://dl.google.com stable/main TranslationIndex Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Fetched 5,127 B in 7s (673 B/s) Reading package lists... Done W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/InRelease W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-updates/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-backports/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/precise/Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) W: Failed to fetch http://ppa.launchpad.net/caffeine-developers/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Some index files failed to download. They have been ignored, or old ones used instead. W: Duplicate sources.list entry http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_nemequ_sqlheavy_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_sgringwe_beatbox_ubuntu_dists_precise_main_binary-i386_Packages) Contents of /etc/apt/sources.list: # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release i386 (20111012)]/ oneiric main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security restricted main multiverse universe #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main Testing Alternate sources.list file These are the steps I followed to produce the following output: Please backup your sources.list: sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup and then replace the contents of /etc/apt/sources.list with the below lines and run apt-get update: deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner deb http://extras.ubuntu.com/ubuntu precise main Output: someone@someone-UBook:~$ sudo apt-get update Ign http://archive.canonical.com precise InRelease Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Ign http://archive.ubuntu.com precise InRelease Ign http://extras.ubuntu.com precise InRelease Ign http://archive.ubuntu.com precise-updates InRelease Hit http://archive.canonical.com precise/partner i386 Packages Hit http://extras.ubuntu.com precise Release.gpg Ign http://archive.ubuntu.com precise-backports InRelease Ign http://archive.canonical.com precise/partner TranslationIndex Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Hit http://extras.ubuntu.com precise Release Get:1 http://archive.ubuntu.com precise Release.gpg [198 B] Ign http://dl.google.com stable InRelease Err http://dl.google.com stable InRelease Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Get:2 http://archive.ubuntu.com precise-updates Release.gpg [198 B] Hit http://extras.ubuntu.com precise/main i386 Packages Get:3 http://archive.ubuntu.com precise-backports Release.gpg [198 B] Ign http://security.ubuntu.com precise-security InRelease Ign http://extras.ubuntu.com precise/main TranslationIndex Err http://extras.ubuntu.com precise/main Translation-en_US Unable to connect to extras.ubuntu.com:http: Err http://extras.ubuntu.com precise/main Translation-en Unable to connect to extras.ubuntu.com:http: Get:4 http://security.ubuntu.com precise-security Release.gpg [198 B] Get:5 http://archive.ubuntu.com precise Release [49.6 kB] Get:6 http://security.ubuntu.com precise-security Release [49.6 kB] Get:7 http://archive.ubuntu.com precise-updates Release [49.6 kB] Get:8 http://archive.ubuntu.com precise-backports Release [49.6 kB] Get:9 http://security.ubuntu.com precise-security/main i386 Packages [32.9 kB] Get:10 http://archive.ubuntu.com precise/main i386 Packages [1,274 kB] Get:11 http://security.ubuntu.com precise-security/restricted i386 Packages [14 B] Get:12 http://security.ubuntu.com precise-security/universe i386 Packages [8,594 B] Get:13 http://security.ubuntu.com precise-security/multiverse i386 Packages [1,393 B] Get:14 http://security.ubuntu.com precise-security/main TranslationIndex [73 B] Get:15 http://security.ubuntu.com precise-security/multiverse TranslationIndex [71 B] Get:16 http://security.ubuntu.com precise-security/restricted TranslationIndex [70 B] Get:17 http://security.ubuntu.com precise-security/universe TranslationIndex [72 B] Get:18 http://security.ubuntu.com precise-security/main Translation-en [13.6 kB] Get:19 http://security.ubuntu.com precise-security/multiverse Translation-en [587 B] Get:20 http://security.ubuntu.com precise-security/restricted Translation-en [14 B] Get:21 http://security.ubuntu.com precise-security/universe Translation-en [6,261 B] Get:22 http://archive.ubuntu.com precise/restricted i386 Packages [8,431 B] Get:23 http://archive.ubuntu.com precise/universe i386 Packages [4,796 kB] Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Get:24 http://ppa.launchpad.net precise Release.gpg [316 B] Get:25 http://ppa.launchpad.net precise Release.gpg [316 B] Get:26 http://ppa.launchpad.net precise Release.gpg [316 B] Ign http://ppa.launchpad.net precise Release.gpg Get:27 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:28 http://ppa.launchpad.net precise Release.gpg [316 B] Get:29 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:30 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:31 http://ppa.launchpad.net precise Release [11.9 kB] Get:32 http://ppa.launchpad.net precise Release [11.9 kB] Get:33 http://archive.ubuntu.com precise/multiverse i386 Packages [121 kB] Get:34 http://ppa.launchpad.net precise Release [11.9 kB] Ign http://ppa.launchpad.net precise Release Get:35 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://ppa.launchpad.net precise Release Hit http://archive.ubuntu.com precise/restricted TranslationIndex Get:36 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/universe TranslationIndex Get:37 http://ppa.launchpad.net precise Release [11.9 kB] Get:38 http://archive.ubuntu.com precise-updates/main i386 Packages [96.5 kB] Hit http://ppa.launchpad.net precise Release Get:39 http://ppa.launchpad.net precise Release [11.9 kB] Get:40 http://archive.ubuntu.com precise-updates/restricted i386 Packages [770 B] Hit http://ppa.launchpad.net precise Release Get:41 http://archive.ubuntu.com precise-updates/universe i386 Packages [27.7 kB] Get:42 http://ppa.launchpad.net precise/main Sources [524 B] Get:43 http://archive.ubuntu.com precise-updates/multiverse i386 Packages [1,393 B] Get:44 http://ppa.launchpad.net precise/main i386 Packages [507 B] Hit http://archive.ubuntu.com precise-updates/main TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://archive.ubuntu.com precise-updates/restricted TranslationIndex Get:45 http://ppa.launchpad.net precise/main Sources [932 B] Hit http://archive.ubuntu.com precise-updates/universe TranslationIndex Get:46 http://ppa.launchpad.net precise/main i386 Packages [1,017 B] Get:47 http://archive.ubuntu.com precise-backports/main i386 Packages [559 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:48 http://archive.ubuntu.com precise-backports/restricted i386 Packages [14 B] Get:49 http://archive.ubuntu.com precise-backports/universe i386 Packages [1,391 B] Get:50 http://ppa.launchpad.net precise/main Sources [1,402 B] Get:51 http://archive.ubuntu.com precise-backports/multiverse i386 Packages [14 B] Hit http://archive.ubuntu.com precise-backports/main TranslationIndex Get:52 http://ppa.launchpad.net precise/main i386 Packages [1,605 B] Hit http://archive.ubuntu.com precise-backports/multiverse TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted TranslationIndex Hit http://archive.ubuntu.com precise-backports/universe TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse Translation-en Get:53 http://ppa.launchpad.net precise/main Sources [931 B] Hit http://archive.ubuntu.com precise/restricted Translation-en Get:54 http://ppa.launchpad.net precise/main i386 Packages [1,079 B] Hit http://archive.ubuntu.com precise/universe Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/main Translation-en Hit http://ppa.launchpad.net precise/main Sources Hit http://archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://ppa.launchpad.net precise/main i386 Packages Hit http://archive.ubuntu.com precise-updates/restricted Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/universe Translation-en Get:55 http://ppa.launchpad.net precise/main Sources [3,611 B] Hit http://archive.ubuntu.com precise-backports/main Translation-en Get:56 http://ppa.launchpad.net precise/main i386 Packages [2,468 B] Hit http://archive.ubuntu.com precise-backports/multiverse Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted Translation-en Hit http://archive.ubuntu.com precise-backports/universe Translation-en Get:57 http://ppa.launchpad.net precise/main Sources [1,524 B] Get:58 http://ppa.launchpad.net precise/main i386 Packages [2,719 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://ppa.launchpad.net precise/main Sources Hit http://ppa.launchpad.net precise/main i386 Packages Ign http://ppa.launchpad.net precise/main TranslationIndex Get:59 http://ppa.launchpad.net precise/main Sources [1,052 B] Get:60 http://ppa.launchpad.net precise/main i386 Packages [1,388 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:61 http://ppa.launchpad.net precise/main Sources [1,185 B] Get:62 http://ppa.launchpad.net precise/main i386 Packages [1,698 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Err http://ppa.launchpad.net precise/main Sources 404 Not Found Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Fetched 6,699 kB in 15s (445 kB/s) Reading package lists... Done W: Failed to fetch http://dl.google.com/linux/talkplugin/deb/dists/stable/InRelease W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://dl.google.com/linux/chrome/deb/dists/sta

    Read the article

  • Ports do not open after rules appended in iptables

    - by user2699451
    I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

    Read the article

  • ASA 5505 Vlan question

    - by Wayne
    I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1<br> nameif inside<br> security-level 100<br> ip address 192.168.110.254 255.255.255.0 <br> !<br> interface Vlan2<br> nameif outside<br> security-level 0<br> pppoe client vpdn group birdie<br> ip address removedIP 255.255.255.255 pppoe <br> !<br> interface Vlan3<br> no forward interface Vlan1<br> nameif home<br> security-level 50<br> ip address 192.168.7.1 255.255.255.0 <br> ! <br> interface Ethernet0/0<br> switchport access vlan 2<br> ! <br> interface Ethernet0/1<br> ! <br> interface Ethernet0/2<br> ! <br> interface Ethernet0/3<br> ! <br> interface Ethernet0/4<br> switchport access vlan 3<br> ! <br> interface Ethernet0/5<br> shutdown <br> ! <br> interface Ethernet0/6<br> shutdown <br> ! <br> interface Ethernet0/7<br> shutdown <br> ! <br> ftp mode passive<br> clock timezone EST -5<br> clock summer-time EDT recurring<br> access-list Outside-In extended permit icmp any any <br> access-list Outside-In extended permit tcp any any eq www <br> access-list Outside-In extended permit tcp any any eq https <br> access-list Outside-In extended permit tcp any any eq 5969 <br> access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 <br>any access-list inside_in extended permit icmp any any <br> access-list inside_in extended permit ip any any <br> access-list home_in extended permit icmp any any <br> access-list home_in extended permit ip any any <br> pager lines 24<br> logging enable<br> logging asdm informational<br> mtu inside 1492<br> mtu outside 1492<br> mtu home 1500 <br> ip local pool vpnuser 192.168.111.5-192.168.111.20<br> icmp unreachable rate-limit 1 burst-size 1<br> asdm image disk0:/asdm-524.bin<br> no asdm history enable<br> arp timeout 14400<br> nat-control <br> global (outside) 1 interface<br> nat (inside) 0 access-list inside_nat0_outbound<br> nat (inside) 1 0.0.0.0 0.0.0.0<br> nat (home) 1 192.168.7.0 255.255.255.0<br> static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 <br> static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 <br> static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 <br> static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 <br> access-group inside_in in interface inside<br> access-group Outside-In in interface outside<br> access-group home_in in interface home<br> route outside 0.0.0.0 0.0.0.0 RemovedIP 1<br>

    Read the article

  • Should the hostname of my VPS point to the dedi IP of my Domain or to to a shared one used for new account creation?

    - by thomas
    I leased a VPS which I want to use to sell shared hosting. 3 IPs - I call them A, B and C here for simplicity. Actual setup is: A=NS1.mydomain.com; host.mydomain.com and is used to set-up new accounts in shared environment B=NS2.mydomain.com C=dedicated IP for mydomain.com (SSL secured) The more I read about DNS, the more I get confused; thus my question: Is this configuration "Good Practice", especially the hostname pointing to A rather than to C? And what would be a better alternative?

    Read the article

  • Infinite sharing system (PHP/MySQLi)

    - by Toine Lille
    I'm working on a discount system for whichever customer shares a product and brings in new customers. Each unique visit = $0.05 off, each new customer = $0.50 off (it's a cheap product so yeah, no big numbers). When a new customer shares the site, the customer initially responsible for the new customer (if any) will get half of the new customer's discount as well. The initial customer would get a fourth for the next level and the new customer half of that, etc, creating a tree or pyramid that way that could be infinite. Initial customer ($1.35 discount: 2 new+3 visits + half of 1 new+2 visits) Visitor ($0) Visitor ($0) New customer ($0.60) Visitor ($0) Visitor ($0) Newer customer ($0) New customer ($0) Visitor ($0) The customers are saved along with their IP addresses (bin2hex(inet_pton)) in a database table (customers) with info like a unique id, e-mail address and first date/time the purchased a product (= time of registration). The shares are saved in a separate table within the same database (sharing). Each unique IP addresses that visits the site creates a new row featuring the IP address (also saved as bin2hex(inet_pton)), the id of the customer who shared it and the date/time of the visit. Sharing goes via URL, featuring a GET element containing the customer's id. Visits and new customers overlap, as visits will always occur before the new customer does. That's fine. The date/times are used just to make it a little more secure (I also use the IP along with cookies to see if people cheat the system). If an IP is already in the sharing or customer tables, it does not count and will not create a new entry. Now the problem is, how to make the infinity happen and apply the different values to it? That's all I'd need to know. It needs to calculate the discount for each customer separately, but also allow for monitoring altogether (though that's just a matter of passing all ID's through it). I figured I'd start (after the database connection) with $stmt = $con->prepare('SELECT ip,datetime FROM sharing WHERE sender=?'); $stmt->bind_param('i',$customerid); $stmt->execute(); $stmt->store_result(); $discount = $discount + ($stmt->num_rows * 0.05); $stmt->bind_result($ip,$timeofsharing); to translate all the visits to $0.05 of discount each. To check for the new customers that came from these visits, I wrote the following: while ($sql->fetch()) { $stmt2 = $con->prepare("SELECT datetime FROM users WHERE ip=?"); $stmt2->bind_param('s',$ip); $stmt2->execute(); $stmt2->store_result(); $stmt2->bind_result($timeofpurchase); Followed by a little more security comparing the datetimes: while ($stmt2->fetch()) { if (strtotime($timeofpurchase) < strtotime($timeofsharing)) { $discount = $discount + $0.50; } But this is just for the initial customer's direct results. If I'd want to check for the next level, I'd basically have to put the exact same check and loop in itself, checking each new customer the initial customer they brought to the site, and then for the next level again to check all of the newer customers, etc, etc. What to do? / Where to go? / What would be the correct practice for this? Thanks!

    Read the article

  • Communication Between Your PC and Azure VM via Windows Azure Connect

    - by Shaun
    With the new release of the Windows Azure platform there are a lot of new features available. In my previous post I introduced a little bit about one of them, the remote desktop access to azure virtual machine. Now I would like to talk about another cool stuff – Windows Azure Connect.   What’s Windows Azure Connect I would like to quote the definition of the Windows Azure Connect in MSDN With Windows Azure Connect, you can use a simple user interface to configure IP-sec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. IP-sec protects communications over Internet Protocol (IP) networks through the use of cryptographic security services. There’s an image available at the MSDN as well that I would like to forward here As we can see, using the Windows Azure Connect the Worker Role 1 and Web Role 1 are connected with the development machines and database servers which some of them are inside the organization some are not. With the Windows Azure Connect, the roles deployed on the cloud could consume the resource which located inside our Intranet or anywhere in the world. That means the roles can connect to the local database, access the local shared resource such as share files, folders and printers, etc.   Difference between Windows Azure Connect and AppFabric It seems that the Windows Azure Connect are duplicated with the Windows Azure AppFabric. Both of them are aiming to solve the problem on how to communication between the resource in the cloud and inside the local network. The table below lists the differences in my understanding. Category Windows Azure Connect Windows Azure AppFabric Purpose An IP-sec connection between the local machines and azure roles. An application service running on the cloud. Connectivity IP-sec, Domain-joint Net Tcp, Http, Https Components Windows Azure Connect Driver Service Bus, Access Control, Caching Usage Azure roles connect to local database server Azure roles use local shared files,  folders and printers, etc. Azure roles join the local AD. Expose the local service to Internet. Move the authorization process to the cloud. Integrate with existing identities such as Live ID, Google ID, etc. with existing local services. Utilize the distributed cache.   And also some scenarios on which of them should be used. Scenario Connect AppFabric I have a service deployed in the Intranet and I want the people can use it from the Internet.   Y I have a website deployed on Azure and need to use a database which deployed inside the company. And I don’t want to expose the database to the Internet. Y   I have a service deployed in the Intranet and is using AD authorization. I have a website deployed on Azure which needs to use this service. Y   I have a service deployed in the Intranet and some people on the Internet can use it but need to be authorized and authenticated.   Y I have a service in Intranet, and a website deployed on Azure. This service can be used from Internet and that website should be able to use it as well by AD authorization for more functionalities. Y Y   How to Enable Windows Azure Connect OK we talked a lot information about the Windows Azure Connect and differences with the Windows Azure AppFabric. Now let’s see how to enable and use the Windows Azure Connect. First of all, since this feature is in CTP stage we should apply before use it. On the Windows Azure Portal we can see our CTP features status under Home, Beta Program page. You can send the apply to join the Beta Programs to Microsoft in this page. After a few days the Microsoft will send an email to you (the email of your Live ID) when it’s available. In my case we can see that the Windows Azure Connect had been activated by Microsoft and then we can click the Connect button on top, or we can click the Virtual Network item from the left navigation bar.   The first thing we need, if it’s our first time to enter the Connect page, is to enable the Windows Azure Connect. After that we can see our Windows Azure Connect information in this page.   Add a Local Machine to Azure Connect As we explained below the Windows Azure Connect can make an IP-sec connection between the local machines and azure role instances. So that we firstly add a local machine into our Azure Connect. To do this we will click the Install Local Endpoint button on top and then the portal will give us an URL. Copy this URL to the machine we want to add and it will download the software to us. This software will be installed in the local machines which we want to join the Connect. After installed there will be a tray-icon appeared to indicate this machine had been joint our Connect. The local application will be refreshed to the Windows Azure Platform every 5 minutes but we can click the Refresh button to let it retrieve the latest status at once. Currently my local machine is ready for connect and we can see my machine in the Windows Azure Portal if we switched back to the portal and selected back Activated Endpoints node.   Add a Windows Azure Role to Azure Connect Let’s create a very simple azure project with a basic ASP.NET web role inside. To make it available on Windows Azure Connect we will open the azure project property of this role from the solution explorer in the Visual Studio, and select the Virtual Network tab, check the Activate Windows Azure Connect. The next step is to get the activation token from the Windows Azure Portal. In the same page there is a button named Get Activation Token. Click this button then the portal will display the token to me. We copied this token and pasted to the box in the Visual Studio tab. Then we deployed this application to azure. After completed the deployment we can see the role instance was listed in the Windows Azure Portal - Virtual Connect section.   Establish the Connect Group The final task is to create a connect group which contains the machines and role instances need to be connected each other. This can be done in the portal very easy. The machines and instances will NOT be connected until we created the group for them. The machines and instances can be used in one or more groups. In the Virtual Connect section click the Groups and Roles node from the left side navigation bar and clicked the Create Group button on top. This will bring up a dialog to us. What we need to do is to specify a group name, description; and then we need to select the local computers and azure role instances into this group. After the Azure Fabric updated the group setting we can see the groups and the endpoints in the page. And if we switch back to the local machine we can see that the tray-icon have been changed and the status turned connected. The Windows Azure Connect will update the group information every 5 minutes. If you find the status was still in Disconnected please right-click the tray-icon and select the Refresh menu to retrieve the latest group policy to make it connected.   Test the Azure Connect between the Local Machine and the Azure Role Instance Now our local machine and azure role instance had been connected. This means each of them can communication to others in IP level. For example we can open the SQL Server port so that our azure role can connect to it by using the machine name or the IP address. The Windows Azure Connect uses IPv6 to connect between the local machines and role instances. You can get the IP address from the Windows Azure Portal Virtual Network section when select an endpoint. I don’t want to take a full example for how to use the Connect but would like to have two very simple tests. The first one would be PING.   When a local machine and role instance are connected through the Windows Azure Connect we can PING any of them if we opened the ICMP protocol in the Filewall setting. To do this we need to run a command line before test. Open the command window on the local machine and the role instance, execute the command as following netsh advfirewall firewall add rule name="ICMPv6" dir=in action=allow enable=yes protocol=icmpv6 Thanks to Jason Chen, Patriek van Dorp, Anton Staykov and Steve Marx, they helped me to enable  the ICMPv6 setting. For the full discussion we made please visit here. You can use the Remote Desktop Access feature to logon the azure role instance. Please refer my previous blog post to get to know how to use the Remote Desktop Access in Windows Azure. Then we can PING the machine or the role instance by specifying its name. Below is the screen I PING my local machine from my azure instance. We can use the IPv6 address to PING each other as well. Like the image following I PING to my role instance from my local machine thought the IPv6 address.   Another example I would like to demonstrate here is folder sharing. I shared a folder in my local machine and then if we logged on the role instance we can see the folder content from the file explorer window.   Summary In this blog post I introduced about another new feature – Windows Azure Connect. With this feature our local resources and role instances (virtual machines) can be connected to each other. In this way we can make our azure application using our local stuff such as database servers, printers, etc. without expose them to Internet.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Oracle Solaris Zones Physical to virtual (P2V)

    - by user939057
    IntroductionThis document describes the process of creating and installing a Solaris 10 image build from physical system and migrate it into a virtualized operating system environment using the Oracle Solaris 10 Zones Physical-to-Virtual (P2V) capability.Using an example and various scenarios, this paper describes how to take advantage of theOracle Solaris 10 Zones Physical-to-Virtual (P2V) capability with other Oracle Solaris features to optimize performance using the Solaris 10 resource management advanced storage management using Solaris ZFS plus improving operating system visibility with Solaris DTrace. The most common use for this tool is when performing consolidation of existing systems onto virtualization enabled platforms, in addition to that we can use the Physical-to-Virtual (P2V) capability  for other tasks for example backup your physical system and move them into virtualized operating system environment hosted on the Disaster Recovery (DR) site another option can be building an Oracle Solaris 10 image repository with various configuration and a different software packages in order to reduce provisioning time.Oracle Solaris ZonesOracle Solaris Zones is a virtualization and partitioning technology supported on Oracle Sun servers powered by SPARC and Intel processors.This technology provides an isolated and secure environment for running applications. A zone is a virtualized operating system environment created within a single instance of the Solaris 10 Operating System.Each virtual system is called a zone and runs a unique and distinct copy of the Solaris 10 operating system.Oracle Solaris Zones Physical-to-Virtual (P2V)A new feature for Solaris 10 9/10.This feature provides the ability to build a Solaris 10 images from physical system and migrate it into a virtualized operating system environmentThere are three main steps using this tool1. Image creation on the source system, this image includes the operating system and optionally the software in which we want to include within the image. 2. Preparing the target system by configuring a new zone that will host the new image.3. Image installation on the target system using the image we created on step 1. The host, where the image is built, is referred to as the source system and the host, where theimage is installed, is referred to as the target system. Benefits of Oracle Solaris Zones Physical-to-Virtual (P2V)Here are some benefits of this new feature:  Simple- easy build process using Oracle Solaris 10 built-in commands.  Robust- based on Oracle Solaris Zones a robust and well known virtualization technology.  Flexible- support migration between V series servers into T or -M-series systems.For the latest server information, refer to the Sun Servers web page. PrerequisitesThe target Oracle Solaris system should be running the latest version of the patching patch cluster. and the minimum Solaris version on the target system should be Solaris 10 9/10.Refer to the latest Administration Guide for Oracle Solaris for a complete procedure on how todownload and install Oracle Solaris. NOTE: If the source system that used to build the image is an older version then the targetsystem, then during the process, the operating system will be upgraded to Solaris 10 9/10(update on attach).Creating the Image Used to distribute the software.We will create an image on the source machine. We can create the image on the local file system and then transfer it to the target machine, or build it into a NFS shared storage andmount the NFS file system from the target machine.Optional  before creating the image we need to complete the software installation that we want to include with the Solaris 10 image.An image is created by using the flarcreate command:Source # flarcreate -S -n s10-system -L cpio /var/tmp/solaris_10_up9.flarThe command does the following:  -S specifies that we skip the disk space check and do not write archive size data to the archive (faster).  -n specifies the image name.  -L specifies the archive format (i.e cpio). Optionally, we can add descriptions to the archive identification section, which can help to identify the archive later.Source # flarcreate -S -n s10-system -e "Oracle Solaris with Oracle DB10.2.0.4" -a "oracle" -L cpio /var/tmp/solaris_10_up9.flarYou can see example of the archive identification section in Appendix A: archive identification section.We can compress the flar image using the gzip command or adding the -c option to the flarcreate commandSource # gzip /var/tmp/solaris_10_up9.flarAn md5 checksum can be created for the image in order to ensure no data tamperingSource # digest -v -a md5 /var/tmp/solaris_10_up9.flar Moving the image into the target system.If we created the image on the local file system, we need to transfer the flar archive from the source machine to the target machine.Source # scp /var/tmp/solaris_10_up9.flar target:/var/tmpConfiguring the Zone on the target systemAfter copying the software to the target machine, we need to configure a new zone in order to host the new image on that zone.To install the new zone on the target machine, first we need to configure the zone (for the full zone creation options see the following link: http://docs.oracle.com/cd/E18752_01/html/817-1592/index.html  )ZFS integrationA flash archive can be created on a system that is running a UFS or a ZFS root file system.NOTE: If you create a Solaris Flash archive of a Solaris 10 system that has a ZFS root, then bydefault, the flar will actually be a ZFS send stream, which can be used to recreate the root pool.This image cannot be used to install a zone. You must create the flar with an explicit cpio or paxarchive when the system has a ZFS root.Use the flarcreate command with the -L archiver option, specifying cpio or pax as themethod to archive the files. (For example, see Step 1 in the previous section).Optionally, on the target system you can create the zone root folder on a ZFS file system inorder to benefit from the ZFS features (clones, snapshots, etc...).Target # zpool create zones c2t2d0 Create the zone root folder:Target # chmod 700 /zones Target # zonecfg -z solaris10-up9-zonesolaris10-up9-zone: No such zone configuredUse 'create' to begin configuring a new zone.zonecfg:solaris10-up9-zone> createzonecfg:solaris10-up9-zone> set zonepath=/zoneszonecfg:solaris10-up9-zone> set autoboot=truezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone:net> set address=192.168.0.1zonecfg:solaris10-up9-zone:net> set physical=nxge0zonecfg:solaris10-up9-zone:net> endzonecfg:solaris10-up9-zone> verifyzonecfg:solaris10-up9-zone> commitzonecfg:solaris10-up9-zone> exit Installing the Zone on the target system using the imageInstall the configured zone solaris10-up9-zone by using the zoneadm command with the install -a option and the path to the archive.The following example shows how to create an Image and sys-unconfig the zone.Target # zoneadm -z solaris10-up9-zone install -u -a/var/tmp/solaris_10_up9.flarLog File: /var/tmp/solaris10-up9-zone.install_log.AJaGveInstalling: This may take several minutes...The following example shows how we can preserve system identity.Target # zoneadm -z solaris10-up9-zone install -p -a /var/tmp/solaris_10_up9.flar Resource management Some applications are sensitive to the number of CPUs on the target Zone. You need tomatch the number of CPUs on the Zone using the zonecfg command:zonecfg:solaris10-up9-zone>add dedicated-cpuzonecfg:solaris10-up9-zone> set ncpus=16DTrace integrationSome applications might need to be analyzing using DTrace on the target zone, you canadd DTrace support on the zone using the zonecfg command:zonecfg:solaris10-up9-zone>setlimitpriv="default,dtrace_proc,dtrace_user" Exclusive IP stack An Oracle Solaris Container running in Oracle Solaris 10 can have a shared IP stack with the global zone, or it can have an exclusive IP stack (which was released in Oracle Solaris 10 8/07). An exclusive IP stack provides a complete, tunable, manageable and independent networking stack to each zone. A zone with an exclusive IP stack can configure Scalable TCP (STCP), IP routing, IP multipathing, or IPsec. For an example of how to configure an Oracle Solaris zone with an exclusive IP stack, see the following example zonecfg:solaris10-up9-zone set ip-type=exclusivezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone> set physical=nxge0 When the installation completes, use the zoneadm list -i -v options to list the installedzones and verify the status.Target # zoneadm list -i -vSee that the new Zone status is installedID NAME STATUS PATH BRAND IP0 global running / native shared- solaris10-up9-zone installed /zones native sharedNow boot the ZoneTarget # zoneadm -z solaris10-up9-zone bootWe need to login into the Zone order to complete the zone set up or insert a sysidcfg file beforebooting the zone for the first time see example for sysidcfg file in Appendix B: sysidcfg filesectionTarget # zlogin -C solaris10-up9-zoneTroubleshootingIf an installation fails, review the log file. On success, the log file is in /var/log inside the zone. Onfailure, the log file is in /var/tmp in the global zone.If a zone installation is interrupted or fails, the zone is left in the incomplete state. Use uninstall -F to reset the zone to the configured state.Target # zoneadm -z solaris10-up9-zone uninstall -FTarget # zonecfg -z solaris10-up9-zone delete -FConclusionOracle Solaris Zones P2V tool provides the flexibility to build pre-configuredimages with different software configuration for faster deployment and server consolidation.In this document, I demonstrated how to build and install images and to integrate the images with other Oracle Solaris features like ZFS and DTrace.Appendix A: archive identification sectionWe can use the head -n 20 /var/tmp/solaris_10_up9.flar command in order to access theidentification section that contains the detailed description.Target # head -n 20 /var/tmp/solaris_10_up9.flarFlAsH-aRcHiVe-2.0section_begin=identificationarchive_id=e4469ee97c3f30699d608b20a36011befiles_archived_method=cpiocreation_date=20100901160827creation_master=mdet5140-1content_name=s10-systemcreation_node=mdet5140-1creation_hardware_class=sun4vcreation_platform=SUNW,T5140creation_processor=sparccreation_release=5.10creation_os_name=SunOScreation_os_version=Generic_142909-16files_compressed_method=nonecontent_architectures=sun4vtype=FULLsection_end=identificationsection_begin=predeploymentbegin 755 predeployment.cpio.ZAppendix B: sysidcfg file sectionTarget # cat sysidcfgsystem_locale=Ctimezone=US/Pacificterminal=xtermssecurity_policy=NONEroot_password=HsABA7Dt/0sXXtimeserver=localhostname_service=NONEnetwork_interface=primary {hostname= solaris10-up9-zonenetmask=255.255.255.0protocol_ipv6=nodefault_route=192.168.0.1}name_service=NONEnfs4_domain=dynamicWe need to copy this file before booting the zoneTarget # cp sysidcfg /zones/solaris10-up9-zone/root/etc/

    Read the article

  • Introducción a ENUM (E.164 Number Mapping)

    - by raul.goycoolea
    E.164 Number Mapping (ENUM o Enum) se diseñó para resolver la cuestión de como se pueden encontrar servicios de internet mediante un número telefónico, es decir cómo se pueden usar los los teléfonos, que solamente tienen 12 teclas, para acceder a servicios de Internet. La parte más básica de ENUM es por tanto la convergencia de las redes del STDP y la IP; ENUM hace que pueda haber una correspondencia entre un número telefónico y un identificador de Internet. En síntesis, Enum es un conjunto de protocolos para convertir números E.164 en URIs, y viceversa, de modo que el sistema de numeración E.164 tenga una función de correspondencia con las direcciones URI en Internet. Esta función es necesaria porque un número telefónico no tiene sentido en el mundo IP, ni una dirección IP tiene sentido en las redes telefónicas. Así, mediante esta técnica, las comunicaciones cuyo destino se marque con un número E.164, puedan terminar en el identificador correcto (número E.164 si termina en el STDP, o URI si termina en redes IP). La solución técnica de mirar en una base de datos cual es el identificador de destino tiene consecuencias muy interesantes, como que la llamada se pueda terminar donde desee el abonado llamado. Esta es una de las características que ofrece ENUM : el destino concreto, el terminal o terminales de terminación, no lo decide quien inicia la llamada o envía el mensaje sino la persona que es llamada o recibe el mensaje, que ha escrito sus preferencias en una base de datos. En otras palabras, el destinatario de la llamada decide cómo quiere ser contactado, tanto si lo que se le comunica es un email, o un sms, o telefax, o una llamada de voz. Cuando alguien quiera llamarle a usted, lo que tiene que hacer el llamante es seleccionar su nombre (el del llamado) en la libreta de direcciones del terminal o marcar su número ENUM. Una aplicación informática obtendrá de una base de datos los datos de contacto y disponibilidad que usted decidió. Y el mensaje le será remitido tal como usted especificó en dicha base de datos. Esto es algo nuevo que permite que usted, como persona llamada, defina sus preferencias de terminación para cualquier tipo de contenido. Por ejemplo, usted puede querer que todos los emails le sean enviados como sms o que los mensajes de voz se le remitan como emails; las comunicaciones ya no dependen de donde esté usted o deque tipo de terminal utiliza (teléfono, pda, internet). Además, con ENUM usted puede gestionar la portabilidad de sus números fijos y móviles. ENUM emplea una técnica de búsqueda indirecta en una base de datos que tiene los registros NAPTR ("Naming Authority Pointer Resource Records" tal como lo define el RFC 2915), y que utiliza el número telefónico Enum como clave de búsqueda, para obtener qué URIs corresponden a cada número telefónico. La base de datos que almacena estos registros es del tipo DNS.Si bien en uno de sus diversos usos sirve para facilitar las llamadas de usuarios de VoIP entre redes tradicionales del STDP y redes IP, debe tenerse en cuenta que ENUM no es una función de VoIP sino que es un mecanismo de conversión entre números/identificadores. Por tanto no debe ser confundido con el uso normal de enrutar las llamadas de VoIP mediante los protocolos SIP y H.323. ENUM puede ser muy útil para aquellas organizaciones que quieran tener normalizada la manera en que las aplicaciones acceden a los datos de comunicación de cada usuario. FundamentosPara que la convergencia entre el Sistema Telefónico Disponible al Público (STDP) y la Telefonía por Internet o Voz sobre IP (VoIP) y que el desarrollo de nuevos servicios multimedia tengan menos obstáculos, es fundamental que los usuarios puedan realizar sus llamadas tal como están acostumbrados a hacerlo, marcando números. Para eso, es preciso que haya un sistema universal de correspondencia de número a direcciones IP (y viceversa) y que las diferentes redes se puedan interconectar. Hay varias fórmulas que permiten que un número telefónico sirva para establecer comunicación con múltiples servicios. Una de estas fórmulas es el Electronic Number Mapping System ENUM, normalizado por el grupo de tareas especiales de ingeniería en Internet (IETF, Internet engineering task force), del que trata este artículo, que emplea la numeración E.164, los protocolos y la infraestructura telefónica para acceder indirectamente a diferentes servicios. Por tanto, se accede a un servicio mediante un identificador numérico universal: un número telefónico tradicional. ENUM permite comunicar las direcciones del mundo IP con las del mundo telefónico, y viceversa, sin problemas. Antes de entrar en mayores profundidades, conviene dar una breve pincelada para aclarar cómo se organiza la correspondencia entre números o URI. Para ello imaginemos una llamada que se inicia desde el servicio telefónico tradicional con destino a un número Enum. En ENUM Público, el abonado o usuario Enum a quien va destinada lallamada, habrá decidido incluir en la base de datos Enum uno o varios URI o números E.164, que forman una lista con sus preferencias para terminar la llamada. Y el sistema como se explica más adelante, elegirá cual es el número o URI adecuado para dicha terminación. Por tanto como resultado de la consulta a la base dedatos Enum siempre se da una relación unívoca entre el número Enum marcado y el de terminación, conforme a los deseos de la persona llamada.Variedades de ENUMUna posible fuente de confusión cuando se trata sobre ENUM es la variedad de soluciones o sistemas que emplean este calificativo. Lo habitual es que cuando se haga una referencia a ENUM se trate de uno de los siguientes casos: ENUM Público: Es la visión original de ENUM, como base de datos pública, parecida a un directorio, donde el abonado "opta" a ser incluido en la base de datos, que está gestionada en el dominio e164.arpa, delegando a cada país la gestión de la base de datos y la numeración. También se conoce como ENUM de usuario. Carrier ENUM, o ENUM Infraestructura, o de Operador: Cuando grupos de operadores proveedores de servicios de comunicaciones electrónicas acuerdan compartir la información de los abonados por medio de ENUM mediante acuerdos privados. En este caso son los operadores quienes controlan la información del abonado en vez de hacerlo (optar) los propios abonados. Carrier ENUM o ENUM de Operador también se conoce como Infrastructure ENUM o ENUM Infraestructura, y está siendo normalizado por IETF para la interconexión de VoIP (mediante acuerdos de peering). Como se explicará en la correspondiente sección, también se puede utilizar para la portabilidad o conservación de número. ENUM Privado: Un operador de telefonía o de VoIP, o un ISP, o un gran usuario, puede utilizar las técnicas de ENUM en sus redes y en las de sus clientes sin emplear DNS públicos, con DNS privados o internos. Resulta fácil imaginar como puede utilizarse esta técnica para que compañías multinacionales, o bancos, o agencias de viajes, tengan planes de numeración muy coherentes y eficaces. Cómo funciona ENUMPara conocer cómo funciona Enum, le remitimos a la página correspondiente a ENUM Público, puesto que esa variedad de Enum es la típica, la que dió lugar a todos los procedimientos y normas de IETF .Más detalles sobre: @page { margin: 0.79in } P { margin-bottom: 0.08in } H4 { margin-bottom: 0.08in } H4.ctl { font-family: "Lohit Hindi" } A:link { so-language: zxx } -- ENUM Público. En esta página se explica con cierto detalle como funciona Enum Carrier ENUM o ENUM de Operador ENUM Privado Normas técnicas: RFC 2915: NAPTR RR. The Naming Authority Pointer (NAPTR) DNS Resource Record RFC 3761: ENUM Protocol. The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM). (obsoletes RFC 2916). RFC 3762: Usage of H323 addresses in ENUM Protocol RFC 3764: Usage of SIP addresses in ENUM Protocol RFC 3824: Using E.164 numbers with SIP RFC 4769: IANA Registration for an Enumservice Containing Public Switched Telephone Network (PSTN) Signaling Information RFC 3026: Berlin Liaison Statement RFC 3953: Telephone Number Mapping (ENUM) Service Registration for Presence Services RFC 2870: Root Name Server Operational Requirements RFC 3482: Number Portability in the Global Switched Telephone Network (GSTN): An Overview RFC 2168: Resolution of Uniform Resource Identifiers using the Domain Name System Organizaciones relacionadas con ENUM RIPE - Adimistrador del nivel 0 de ENUM e164.arpa. ITU-T TSB - Unión Internacional de Telecomunicaciones ETSI - European Telecommunications Standards Institute VisionNG - Administrador del rango ENUM 878-10 IETF ENUM Chapter

    Read the article

  • Creating static NAT blocks outbound traffic Cisco ASA

    - by natediggs
    Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

    Read the article

  • How to diagnose frequent segfaults

    - by Andreas Gohr
    My server is logging frequent segmentation faults to /var/log/kern.log in different tools. So far I've seen them in Perl, PHP and rsync. All installed software is up-to-date Debian packages. Here's an exerpt from the log file: Mar 2 01:07:54 gaz kernel: [ 5316.246303] imapsync[4533]: segfault at 8b ip 00007fb448c98fe6 sp 00007ffff571dd68 error 4 in libperl.so.5.10.1[7fb448bd7000+164000] Mar 2 01:17:42 gaz kernel: [ 5904.354307] php5-cgi[4441]: segfault at 2bb3dc8 ip 0000000002bb3dc8 sp 00007fffbeeaae48 error 15 Mar 2 02:54:05 gaz kernel: [11687.922316] php5-cgi[4495]: segfault at 2d7acf9 ip 0000000002d7acf9 sp 00007fff60c6eb18 error 15 Mar 2 10:50:08 gaz kernel: [40250.390322] BUG: unable to handle kernel paging request at 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.390341] IP: [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390353] PGD 208c71067 PUD 21c811067 PMD 209329067 PTE 8000000211c88067 Mar 2 10:50:08 gaz kernel: [40250.390365] Oops: 0011 [#1] SMP Mar 2 10:50:08 gaz kernel: [40250.390373] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 2 10:50:08 gaz kernel: [40250.390386] CPU 1 Mar 2 10:50:08 gaz kernel: [40250.390392] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd _hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_m ce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 2 10:50:08 gaz kernel: [40250.390566] Pid: 11482, comm: munin-limits Not tainted 2.6.32-5-amd64 #1 MS-7368 Mar 2 10:50:08 gaz kernel: [40250.390576] RIP: 0010:[<00000000024b03f0>] [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390586] RSP: 0018:ffff88021cc8dec0 EFLAGS: 00010286 Mar 2 10:50:08 gaz kernel: [40250.390593] RAX: 000000001ddc1000 RBX: 0000000000000010 RCX: ffffffff810f9904 Mar 2 10:50:08 gaz kernel: [40250.390600] RDX: 0000000000000000 RSI: ffffea0007688200 RDI: 0000000000000286 Mar 2 10:50:08 gaz kernel: [40250.390608] RBP: 00000000ffffffea R08: 0000000000000025 R09: 7865542f30312e35 Mar 2 10:50:08 gaz kernel: [40250.390615] R10: 000000d01cc8ddf8 R11: 0000000000000246 R12: ffff88021cc8def8 Mar 2 10:50:08 gaz kernel: [40250.390622] R13: 0000000002295010 R14: 00000000022c9db0 R15: 0000000002488d78 Mar 2 10:50:08 gaz kernel: [40250.390630] FS: 00007f3b3c8b2700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390641] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 2 10:50:08 gaz kernel: [40250.390648] CR2: 00000000024b03f0 CR3: 000000021c5d1000 CR4: 00000000000006e0 Mar 2 10:50:08 gaz kernel: [40250.390656] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390663] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 2 10:50:08 gaz kernel: [40250.390671] Process munin-limits (pid: 11482, threadinfo ffff88021cc8c000, task ffff88021bf59530) Mar 2 10:50:08 gaz kernel: [40250.390681] Stack: Mar 2 10:50:08 gaz kernel: [40250.390687] ffffffff810f1d4a ffff880208c63228 0000000000000000 00007fffc2dcecc0 Mar 2 10:50:08 gaz kernel: [40250.390697] <0> 00000000024ba2b0 0000000002295010 ffffffff810f1e3d 0000000000000004 Mar 2 10:50:08 gaz kernel: [40250.390712] <0> ffff88021bf59530 ffff88021c4edc00 ffffffff812fe0b6 ffff88021c4edc60 Mar 2 10:50:08 gaz kernel: [40250.390732] Call Trace: Mar 2 10:50:08 gaz kernel: [40250.390742] [<ffffffff810f1d4a>] ? vfs_fstatat+0x2c/0x57 Mar 2 10:50:08 gaz kernel: [40250.390750] [<ffffffff810f1e3d>] ? sys_newstat+0x11/0x30 Mar 2 10:50:08 gaz kernel: [40250.390760] [<ffffffff812fe0b6>] ? do_page_fault+0x2e0/0x2fc Mar 2 10:50:08 gaz kernel: [40250.390768] [<ffffffff812fbf55>] ? page_fault+0x25/0x30 Mar 2 10:50:08 gaz kernel: [40250.390777] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 2 10:50:08 gaz kernel: [40250.390783] Code: Bad RIP value. Mar 2 10:50:08 gaz kernel: [40250.390791] RIP [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390799] RSP <ffff88021cc8dec0> Mar 2 10:50:08 gaz kernel: [40250.390805] CR2: 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.391051] ---[ end trace 1cc1473b539c7f6e ]--- Mar 2 11:42:20 gaz kernel: [43382.242301] php5-cgi[10963]: segfault at d81160 ip 0000000000d81160 sp 00007fff3adcb058 error 15 Mar 2 21:51:14 gaz kernel: [79916.418302] php5-cgi[20089]: segfault at 1c59dc8 ip 0000000001c59dc8 sp 00007fff9b877fb8 error 15 Mar 3 03:45:01 gaz kernel: [101143.334305] munin-update[22519] general protection ip:7f516dce204c sp:7fff6049a978 error:0 in libperl.so.5.10.1[7f516dc7d000+164000] Mar 3 11:22:37 gaz kernel: [128599.570307] php5-cgi[22888]: segfault at 36485a8 ip 00000000036485a8 sp 00007fff2d56e1c8 error 15 Mar 4 08:32:17 gaz kernel: [204779.842304] php5-cgi[22090]: segfault at 18 ip 0000000000689e5e sp 00007fff677a6a48 error 6 in php5-cgi[400000+6f9000] Mar 4 10:01:02 gaz kernel: [210104.434706] rsync[22236] general protection ip:7f14a07137f9 sp:7fff88f940b8 error:0 in libc-2.11.2.so[7f14a069d000+158000] Mar 4 11:32:22 gaz kernel: [215584.262316] BUG: unable to handle kernel paging request at 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262331] IP: [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262343] PGD 0 Mar 4 11:32:22 gaz kernel: [215584.262350] Oops: 0010 [#2] SMP Mar 4 11:32:22 gaz kernel: [215584.262359] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 4 11:32:22 gaz kernel: [215584.262371] CPU 1 Mar 4 11:32:22 gaz kernel: [215584.262378] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_mce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 4 11:32:22 gaz kernel: [215584.262552] Pid: 1960, comm: proxymap Tainted: G D 2.6.32-5-amd64 #1 MS-7368 Mar 4 11:32:22 gaz kernel: [215584.262563] RIP: 0010:[<00000000ffffff9c>] [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262573] RSP: 0018:ffff880209257e00 EFLAGS: 00010212 Mar 4 11:32:22 gaz kernel: [215584.262580] RAX: ffff8801514eb780 RBX: ffffffff810efb2d RCX: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262590] RDX: 0000000000000020 RSI: 0000000000000001 RDI: ffff8801514eb780 Mar 4 11:32:22 gaz kernel: [215584.262600] RBP: 00000000ffffffe9 R08: 0000000000000000 R09: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262611] R10: ffff880209257e78 R11: ffffffff81152c7c R12: 0000000000000001 Mar 4 11:32:22 gaz kernel: [215584.262622] R13: 0000000000008001 R14: 0000000000000024 R15: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262633] FS: 00007fca4de35700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 4 11:32:22 gaz kernel: [215584.262650] CR2: 00000000ffffff9c CR3: 00000001c9cbb000 CR4: 00000000000006e0 Mar 4 11:32:22 gaz kernel: [215584.262661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262671] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 4 11:32:22 gaz kernel: [215584.262682] Process proxymap (pid: 1960, threadinfo ffff880209256000, task ffff88021c4b1c40) Mar 4 11:32:22 gaz kernel: [215584.262693] Stack: Mar 4 11:32:22 gaz kernel: [215584.262698] ffffffff810f8566 ffff880209257e78 ffff88021c7bf000 ffff88021c7bf0c8 Mar 4 11:32:22 gaz kernel: [215584.262709] <0> 0000800000000000 ffff88021fc0f000 ffff880209257e78 00000000fffffffe Mar 4 11:32:22 gaz kernel: [215584.262724] <0> ffffffff810e5881 ffff880209257f48 0000000000000286 ffff88021fc0f000 Mar 4 11:32:22 gaz kernel: [215584.262743] Call Trace: Mar 4 11:32:22 gaz kernel: [215584.262753] [<ffffffff810f8566>] ? do_filp_open+0xa7/0x94b Mar 4 11:32:22 gaz kernel: [215584.262763] [<ffffffff810e5881>] ? virt_to_head_page+0x9/0x2a Mar 4 11:32:22 gaz kernel: [215584.262771] [<ffffffff810f9904>] ? user_path_at+0x52/0x79 Mar 4 11:32:22 gaz kernel: [215584.262779] [<ffffffff810cfec1>] ? get_unmapped_area+0xd7/0x139 Mar 4 11:32:22 gaz kernel: [215584.262787] [<ffffffff811019d5>] ? alloc_fd+0x67/0x10c Mar 4 11:32:22 gaz kernel: [215584.262795] [<ffffffff810eceaf>] ? do_sys_open+0x55/0xfc Mar 4 11:32:22 gaz kernel: [215584.262804] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 4 11:32:22 gaz kernel: [215584.262811] Code: Bad RIP value. Mar 4 11:32:22 gaz kernel: [215584.262819] RIP [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262828] RSP <ffff880209257e00> Mar 4 11:32:22 gaz kernel: [215584.262833] CR2: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.263077] ---[ end trace 1cc1473b539c7f6f ]--- As you can see there are segfaults, a general protection fault and a Kernel Oops. My first guess was that there's a Hardware problem of some sort and I asked my Hoster (it's a rented root server) to do a full hardwarecheck - they did, but couldn't find any problem. I don't know what and how they checked but their support team is usually quite good. I ran memtester and cpuburn myself and couldn't find any error either. Unfortunately I have no reliable way to reproduce these segfaults, they seem to be more or less random. On a hunch I disabled the firewall of the system and ran one of the programs that segfaulted regularily (imapsync) and it seemed to take longer to segfault than before, so the problem might be related to the network stack. Or could just be a random thing. Here are the kernel specs: # uname -a Linux gaz 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 GNU/Linux # cat /etc/debian_version 6.0 # lsmod Module Size Used by cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 xt_recent 5977 0 xt_tcpudp 2319 0 iptable_nat 4299 0 nf_nat 13388 1 iptable_nat nf_conntrack_ipv4 9833 3 iptable_nat,nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip6table_filter 2384 0 ip6_tables 15075 1 ip6table_filter xt_DSCP 1995 0 xt_TCPMSS 2919 0 ipt_LOG 4518 0 ipt_REJECT 1953 0 iptable_mangle 2817 0 iptable_filter 2258 0 xt_multiport 2267 0 xt_state 1303 0 xt_limit 1782 0 xt_conntrack 2407 0 nf_conntrack_ftp 5537 0 nf_conntrack 46535 6 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,xt_conntrack,nf_conntrack_ftp ip_tables 13899 3 iptable_nat,iptable_mangle,iptable_filter x_tables 12845 13 xt_recent,xt_tcpudp,iptable_nat,ip6_tables,xt_DSCP,xt_TCPMSS,ipt_LOG,ipt_REJECT,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables loop 11799 0 radeon 573996 0 ttm 39986 1 radeon drm_kms_helper 20065 1 radeon snd_hda_codec_atihdmi 2251 1 drm 142359 3 radeon,ttm,drm_kms_helper snd_hda_intel 20019 0 i2c_algo_bit 4225 1 radeon pcspkr 1699 0 i2c_piix4 8328 0 snd_hda_codec 54244 2 snd_hda_codec_atihdmi,snd_hda_intel i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 snd_hwdep 5380 1 snd_hda_codec snd_pcm 60503 2 snd_hda_intel,snd_hda_codec snd_timer 15582 1 snd_pcm snd 46446 5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 4598 1 snd evdev 7352 3 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm k8temp 3283 0 edac_core 29261 0 edac_mce_amd 6433 0 shpchp 26264 0 pci_hotplug 21203 1 shpchp button 4650 0 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53754 0 powernow_k8 10978 1 aacraid 59779 0 3w_9xxx 28684 0 3w_xxxx 20569 0 raid10 17809 0 raid456 44500 0 async_raid6_recov 5170 1 raid456 async_pq 3479 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2478 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy 1198 2 raid456,async_raid6_recov async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy raid1 18431 3 raid0 5517 0 md_mod 73824 7 raid10,raid456,raid1,raid0 sata_nv 19166 0 sata_sil 7412 0 sata_via 7928 0 sd_mod 29889 8 crc_t10dif 1276 1 sd_mod ata_generic 3047 0 ahci 32374 6 r8169 29229 0 mii 3210 1 r8169 thermal 11674 0 pata_atiixp 3489 0 libata 133632 6 sata_nv,sata_sil,sata_via,ata_generic,ahci,pata_atiixp ohci_hcd 19212 0 ehci_hcd 31151 0 processor 29935 1 powernow_k8 thermal_sys 11942 2 thermal,processor scsi_mod 122149 5 aacraid,3w_9xxx,3w_xxxx,sd_mod,libata usbcore 122034 3 ohci_hcd,ehci_hcd nls_base 6377 1 usbcore # free total used free shared buffers cached Mem: 8166128 1228036 6938092 0 140412 782060 -/+ buffers/cache: 305564 7860564 Swap: 2102456 0 2102456 So, basically my questions are: How can I diagnose this further? Is there any data in the log above that could help me to isolate the troublemaker? Are there any known problems with the above hardware/software I overlooked when googling for it? Is there a way to prevent the kernel from autoloading modules (I probably don't need all these modules and one of them might be the culprit)

    Read the article

  • Ignore whitespace in HTML

    - by IP
    Is there anything in HTML/CSS that tells the browser to ignore whitespace completely? So many times when you want to put, say, two images next to each other - you try desperately to keep the HTML readable, but the browser puts a space between them. So instead of something like this: <imc src="images/minithing.jpg" alt="my mini thing" /> <imc src="images/minithing.jpg" alt="my mini thing" /> <imc src="images/minithing.jpg" alt="my mini thing" /> <imc src="images/minithing.jpg" alt="my mini thing" /> you end up with this <imc src="images/minithing.jpg" alt="my mini thing" /><imc src="images/minithing.jpg" alt="my mini thing" /><imc src="images/minithing.jpg" alt="my mini thing" /><imc src="images/minithing.jpg" alt="my mini thing" /> Which is just so horrible!

    Read the article

  • Cisco ASA: How to route PPPoE-assigned subnet?

    - by Martijn Heemels
    We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

    Read the article

  • Aligning a link to the bottom right of a table...in css

    - by IP
    I need to align "Click here" to the bottom right of this table...but in CSS it seems impossible Adding the link as a row or into the footer of the table is no an option <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title></title> <style type="text/css"> #link { float:right; } div { border:solid black; } table { border: solid red; } </style> </head> <body> <div> <table> <tr> <td>Fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish fish</td> </tr> </table> <a href="." id="link">Click me</a> </div> </body> </html> Any ideas?

    Read the article

  • Programmatic use of ARP

    - by sizzzzlerz
    I have a need for some C or C++ code, compilable under Linux, to be able to take a list of IP addresses of some arbitrary number of remote hosts machines and obtain a ethernet MAC address for each one. These host machines may be on the same subnet or they could be on a different subnet behind a router. Its OK if the MAC address of some or all of the remote hosts is the address of the interface on the router. Ultimately, I want to hand off the IP address and MAC address to an FPGA who will use these pieces of information to format and send UDP/IP packets over ethernet to the hosts. Obviously, the FPGA will also be given its own MAC address and IP address to fill in the source MAC and source IP addresses in the packets. Is there some code I can be pointed to that can create and broadcast ARP packets to these remote machines and receive back the ARP response packets such that the destination MAC addresses can be extracted?

    Read the article

  • Getting svn: E170000: Unrecognized URL scheme for my custom Svn Gradle plugin

    - by Ip Doh
    I wrote a custom gradle plugin using groovy to do basic svn tasks like, Checkout, Clean, Tag etc. The groovy class calls the svn command line client to do these operations, It works fine when i run it on my windows system but the same plugin gives the following error when i run it on a linux system (Centos). svn: E170000: Unrecognized URL scheme for '%22https://source.mycompany.net/svn/MyProject/trunk%22' Am able to make the same calls to the command line client through the command prompt or shell script without any issues. So what is the difference with Here is my code sample String command =String.format("svn co -r %d --non-interactive --trust-server-cert -- username %s --password %s --depth infinity \"%s\" \"%s\"", getRevision(), getUserName(), getUserPassword(), getSrcUrl(), getDir()); Process svnProcess = Runtime.getRuntime().exec(command); BufferedReader stdInput = new BufferedReader(new InputStreamReader(svnProcess.getInputStream())); BufferedReader stdError = new BufferedReader(new InputStreamReader(svnProcess.getErrorStream())); String statusOutputLine ="" while ((statusOutputLine = stdInput.readLine()) != null) { logger.quiet(" " + statusOutputLine); } while (( statusOutputLine = stdError.readLine()) != null) { logger.error(statusOutputLine) throw new Exception(statusOutputLine) } logger.quiet("Successfully Checked out the work space") i do have neon installed on the system -bash-4.1$ svn --version svn, version 1.6.11 (r934486) compiled Jun 25 2011, 11:30:15 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: ra_neon : Module for accessing a repository via WebDAV protocol using Neon. handles 'http' scheme handles 'https' scheme ra_svn : Module for accessing a repository using the svn network protocol. with Cyrus SASL authentication handles 'svn' scheme ra_local : Module for accessing a repository on local disk. handles 'file' scheme

    Read the article

  • AspNetHostingPermission set to Load User Profile

    - by IP
    Very quick question, does anyone know what the effect of setting an application pool in IIS7 o "Load User Profile" would have? Is it advisable etc. Reference: http://dbvt.com/blog/post/AspNetHostingPermission-Security-Exception-Fix-with-Ajax-in-IIS7.aspx

    Read the article

  • error 2016: Condition cannot be specified for Column member

    - by IP
    I am having some issues with Entity Framework in VS2010 The problem I'm getting is described very well here... http://social.msdn.microsoft.com/Forums/en/adonetefx/thread/cacf6a76-09a8-4c90-9502-d8b87c2f6bea It's basically happening when a Foreign key is pointed at the primary key of another table...but if I take off the StoreGeneratedPattern as "Identity", then it tries to insert a value into the identity field ** EDIT So, what it seems to be is that EF4 can't handle a null relationship when the primary key is set to StoreGeneratedPattern="Identity". If I create a FK pointing to this primary key, and make it nullable (effectively creating a 0...M relationship), then it throws this compilation error. Removing StoreGeneratedPattern="Identity" fixes the issue, but causes issues elseware It works if the foreign key is set to not nullable

    Read the article

  • Specifying a per-repository hgrc file

    - by IP
    I'm setting up a centrally hosted Mercurial repository. I would like to be able to define only a small set of users that are able to access that repository (maybe 3 or 4) - what do I need to write in the .hg/hgrc file that in order to make it work like this? thanks, P

    Read the article

  • JQuery Treeview causes browser crash with certain parameters

    - by IP
    I have the following code, which causes Chrome and Safari to crash (Aw Snap in Chrome) jQuery(".filetree").treeview({ animated: "fast", collapsed: true, unique: true, persist: "cookie", toggle: function() { } }); If I change it to this: jQuery(".filetree").treeview({ animated: "fast", toggle: function() { } }); It doesn't crash...any ideas?

    Read the article

  • Websites and web applications?

    - by IP
    (From the point of view of a user, not how it's built or which option is selected in Visual Studio) ...What is the difference between a "website" and a "web application"? Is there a difference? Are there characteristics that characterise the two?

    Read the article

  • jQuery detect visible but hidden elements

    - by IP
    This seems like it should be fairly easy - but I can't find the right selector for it According to the docs (http://api.jquery.com/hidden-selector/ and http://api.jquery.com/visible-selector/)... Elements can be considered hidden for several reasons: An ancestor element is hidden, so the element is not shown on the page. What I want to detect is "this element is visible, but is contained in a hidden parent". Ie, if I made the parent visible, this element would also be visible.

    Read the article

  • django-registration password reset custom template not loading

    - by ip.
    I'm using django-registration for registering users, however when I want to use my own template for password reset I get the admin template and not the template I created. My template is in myapp/templates/registration/password_reset_form.html and my template loaders are properly set: TEMPLATE_LOADERS = ( 'django.template.loaders.filesystem.Loader', 'django.template.loaders.app_directories.Loader', ) What could I be missing? I'm using Django 1.4

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >