Search Results

Search found 14757 results on 591 pages for 'switch statement'.

Page 114/591 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• SNMP based network discovery (switches), device (ports on switches) power management

  - by SaM

  In a enterprise network, what would be the right way to generate a list of switches (SNMP managed) Is it reasonable to ask the organization to supply a list such as this: Switch name IP Address of switch Location SNMP community strings Or are there standard ways to run discovery scans - UDP broadcasts? After having generated a repository such as the above; given a single switch, how to query it for the list of all devices attached to it? Finally, how to selectively power down/power up ports? (remotely - using SNMP) Platform is going to be .NET based (C#) and the library being used is SharpSNMP

  Read the article

• No communication on my VLAN?

  - by Donovan

  I am using a Netgear FSM7328S switch and have designated ports 19-24 as being part of VLAN # 3. I designated them all as untagged because I do not want them to switch traffic to any other port on the switch. I also removed them from the default, untagged, VLAN 1. My issue is that none of the ports 19-24 will communicate with eachother. My laptop plugged in with wireshark shows no switched traffic what so ever. Have I configured it wrong? Thanks, D

  Read the article

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• Hybrid Shutdown in Windows 8

  - by Moab

  Referring to this article published September 8, 2011, it gives instructions on how to to do a full (non-hybrid) shutdown in Windows 8 from the command line. We have an option in the UI to revert back to the Windows 7 shutdown/cold boot behavior, or since that’s likely a fairly infrequent thing, you can use the new /full switch on shutdown.exe. From a cmd prompt, run: shutdown /s /full / t 0 to invoke an immediate full shutdown. shutdown /s /full /t 0 I tried this in W8 Enterprise RTM trial, but did not work, so I did a shutdown /? and noticed they have changed the command for a Full shutdown It appears the /s switch now does the full shutdown as explained in the MS article, and the /hybrid switch does the hybrid shutdown for fast startup. Can anyone confirm this change in other RTM versions of Windows 8? Any Microsoft docs on this change are welcome.

  Read the article

• How to Make Red zone Network settings to Endian OS

  - by Gash

  Please help me, Currently we have about 10 pc's sharing internet. and We have CISCO 800 series router that connect the ADSL, to the lan Segment it connect switch throw the switch all pc's are getting connecting. all user pc's having 192.168.3.--- range ips and gateway is 192.168.3.254 now i install the endian firewall to one PC, it must work as firewall,VPN & proxy i made green zone ip as 192.168.3.222 then how to give red zone IP? i know that is static IP but it cant be same range so please help me out to sort this without changing anything in router, if want i can change the internal IP sets instead of 3.-- 10.-- or something like that and also please state me at present i tried Endian firewall red and green zone cables are pluged in to network switch only please help me to overcome this its urgent

  Read the article

• VPN Network intermittantly fails to provide internet: What could be possible causes

  - by Jake M

  We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

  Read the article

• New CAT5 cable run is unstable - bad jacks? Bad cable?

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• Windows 2012 Server Hyper-V: Cannot see LAN

  - by Samuel

  I have one NIC on the machine loaded XP on the Hyper-V and had chosen the network as virtual switch. No LAN and no internet shows up on the client. Am I missing something? it used to work in 2008-R2. Details: One network card on machine (Qualcomm Atheros AR8131 PIC-E Gigabit Ethernet controller) The virtual machine hard disk is pointing to and existing XP-SP2 hard disk created using VPC 2007 The Virtual machine Network Adapter is setup as Virtual Switch to the real ethernet controller with Enable virtual LAN identification set to 2 (no other virtual machine is created in the system) After the virtual machine boots LAN shows empty in Control Panel Network Connections (this is XP client) and I also cannot access the internet. XP is showing activation prompt but as far as I know it should not disable the network! Virtual network switch is set to External

  Read the article

• Using using a DVI instead of a VGA increase computer screen monitor resolution

  - by Jessica M.

  This is for a computer screen. Both my video card and computer screen have DVI ports on them but I'm using a VGA. I'm wondering if there would be a difference if i switch from VGA to DVI. My current resolution is 1920x1080 with the VGA cord. will my resolution increase if i switch to a DVI? Are there any advantage of switching from VGA to DVI? If there will be a difference if i switch, I've read there are 5 different type of DVI cables. how do I know which one to buy?

  Read the article

• wmic output well formed xml on remote queries

  - by Mervin

  I want to use the WMI command line tool (wmic) to get information about windows computers on the network and output it as valid xml. However, I can't seem to find the right way to do this as the outputted xml currently contains invalid tokens for which I think I should use the /TRANSLATE:basicxml switch. The command: wmic /NODE:"tech-demo" /IMPLEVEL:Impersonate /USER:MyUser /PASSWORD:MyPassword /PRIVILEGES:DISABLE /AUTHLEVEL:Pkt /AUTHORITY:"ntlmdomain:companydomain.local" PATH Win32_LogicalDisk GET * /FORMAT:rawxml This command runs but returns invalid xml tokens ('<' and '' I think? edit: it appears to fail parsing at ‹) When I add the translate switch I get the message: Can not use credentials for local connections a bit strange that it tries to query the local pc when I add the switch.. Help would be greatly appreciated.

  Read the article

• 1Gigabit vs 1.25Gibabit mismatch

  - by Joel Coel

  I need to re-connect the network to a small old outbuilding that hasn't been used in several years. I have to use the existing 62.5um multi-mode fiber run. This end of the fiber is already connected. For the end in the building, I was looking at this pair: http://www.tp-link.com/products/productDetails.asp?class=switch&content=spe&pmodel=TL-SM311LM http://www.tp-link.com/products/productDetails.asp?class=&content=spe&pmodel=TL-SL2210WEB If you look at the sfp first (first link), it's listed at 1.25Gpbs. That's odd, because IIRC the fiber should really only do 1Gbps. It's also supposed to work with the switch I posted (2nd link), but the gbic port on the switch also only shows 1Gbps. What am I missing here?

  Read the article

• Switches with 802.1x "supplicant timeout" feature?

  - by chris

  I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

  Read the article

• Just bought Logitech G35 headset, want to enable/disable headet in one action

  - by Roy Rico

  Hello, Just bought Logitech G35 USB headset, want to enable/disable headet in one action. I have windows 7 64 bit, and currently, to switch from the headset to my spakers (or vice versa) without unplugging the headset, i have to go thru this steps: right click on the sound icon select "sounds" select the "Playback" tab right click headset and hit enable right click speakers and hit disable same steps when wanting to switch back I have to disable the devices, because not all of the programs which are outputting sound will switch immediately if I just set either device to default. I am looking for this to be a single action (either a batch script or a windows shortcut to some action with parameters?) Thanks!

  Read the article

• OpenVSwitch and Virtualbox configuration

  - by Newbie

  I am trying to setup a lab network with OpenVSwitch (Virtual L3 Switch). I want to connect my 3 Virtualbox guest machines (running Debian 6) using OpenVSwitch. But, confused as what should I do first and how should I do this. I mean should I install OpenVSwitch on my VM or on my host machine? If I install on my host machine, then should I make to connect to my VMs. OR If I install OpenVSwitch on one of my VM, then how to connect the rest of the VMs to virtual switch. I know, there is option to connect internal networks in virtualbox, but I a want L3 switch to interconnect my VLANs. Can someone guide me here. Please & Thank you.

  Read the article

• hyper-v server 2003 instance using internet connection sharing disconnects remote desktop to hyper-v host

  - by Joseph Southwell

  I have a windows server 2003 R2 instance running in a hyper-v instance on windows 8. I have setup an internal switch that uses internet connection sharing to get out to the internet. It works fine except for when I try to do windows update on the server 2003 instance it disconnects my remote desktop session to the windows 8 hyper-v host. When I reconnect it says windows update failed. I know that sounds crazy but I have tested it over and over again. If I change the instance to use my external switch (I have an external switch defined on another network adapter) windows update works fine.

  Read the article

• Redundant APC UPS units, single server set up

  - by Sholom

  Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

  Read the article

• Setting the date format in Atlassian Crucible

  - by pwan

  When I set up a review in Atlassian Crucible, and I set a date, it displays it in DD/MM/YYYY I'd like to switch that over to MM/DD/YYYY, but I don't see anywhere in the configuration to switch that. The closest setting I see is for the timezone, which I have set to EST. I have Crucible running on a CentOS 6.2 machine that's set to UTC I'm using Crucible version 2.7.14 Build:20120612060728 2012-06-12 My locale is currently set to en_US.UTF-8 > locale | grep LC_TIME LC_TIME="en_US.UTF-8" Can someone point out how I can switch the date format in Crucible ?

  Read the article

• Choosing a home network layout

  - by James M.

  I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Exclude an input language from Alt+Shift/Ctrl+Shift switching cycle on Windows

  - by Headcrab

  I have 3 input languages installed on my Windows 7: English, Russian and Japanese. So when I switch between them by Ctrl+Shift, they go like English - Russian - Japanese - English - ... I don't use Japanese much, but still need it occasionally. Is there a way to somehow exclude it from the "Ctrl+Shift cycle" without uninstalling it from the system? E. g. Ctrl+Shift will be like English - Russian - English - ..., while I still could switch to Japanese by a dedicated keyboard shortcut, say, Ctrl + 3? That extra Ctrl+Shift to go through Japanese just to switch between English and Russian is very annoying, and using Ctrl+1, Ctrl+2, Ctrl+3 for each input language isn't very ergonomic, either.

  Read the article

• How to fix unstable RJ45 jacks? [closed]

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• How do I change the NGINX user?

  - by danielfaraday

  I have a PHP script that creates a directory and outputs an image to the directory. This was working just fine under Apache but we recently decided to switch to NGINX to make more use of our limited RAM. I'm using the PHP mkdir() command to create the directory: mkdir(dirname($path['image']['server']), 0755, true); After the switch to NGINX, I'm getting the following warning: Warning: mkdir(): Permission denied in ... I've already checked all the permissions of the parent directories, so I've determined that I probably need to change the NGINX or PHP-FPM 'user' but I'm not sure how to do that (I never had to specify user permissions for APACHE). I can't seem to find much information on this. Any help would be great! (Note: Besides this little hang-up, the switch to NGINX has been pretty seamless; I'm using it for the first time and it literally only took about 10 minutes to get up and running with NGINX. Now I'm just ironing out the kinks.)

  Read the article

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• bad switchs duplicate my ip

  - by tacoen

  I had a large area LAN. There were many switch and AP on it, then somehow I couldn't ping my servers, and it's said that the IP was duplicated. I use arpwatch and found out that one of the switch flip-flop-ing the IP. I isolated that troublesome switch using his mac-address. But, since this a large area LAN... I doubt this will be the last cases. If there any software or hardware that I can use to prevent this kind of error? Sorry for my bad English.

  Read the article

• Is there any way I can add alternative key binding to a feature in compiz?

  - by vava

  I was wondering is there any way to add additional, alternative key binding to a particular feature in compiz? I am using Wall plugin and on my ThinkPad it is convenient to switch between horizontal workspaces with media buttons for browser navigation. But there just two of them, so I have to use completely different combinations to switch between workspaces vertically and that would very helpful if I can also use similar kind of combination to switch horizontally as well in addition to those media buttons. Is there a way maybe to send a message to the compiz to execute particular command? That would solve the issue.

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >