conf - Page 115 - Developer IT

How to keep haproxy log messages out of /var/log/syslog

- by itsadok

I set up haproxy logging via rsyslogd using the tips from this article, and everything seems to be working fine. The log files get the log messages. However, every log message from haproxy also shows up at /var/log/syslog. This means that once the server goes live, the syslog will be quite useless, as it will be run over with haproxy log messages. I would like to filter out those messages from /var/log/syslog. After going over the rsyslogd documentation, I tried to change the file /etc/rsyslog.d/50-default.conf thus: *.*;auth,authpriv.none;haproxy.none -/var/log/syslog I simply added the ;haproxy.nonepart. After restarting rsyslogd it stopped working completely until I reverted my changes. What am I doing wrong?

Read the article

Problems getting Squirrelmail and passenger working on apache

- by Kenneth

I'm trying to have a setup where I want to run a squirrelmail and Passenger on the same apache server, having a url point to squirrelmail and everything else handled by passenger. I've gotten so far that both squirrelmail and passenger will run fine by themselves but when passenger is running it handles all urls. So far I've tried using Alias and Redirect to point a webmail/ url to squirrelmails directory but that does not work. Here is my httpd.conf file: <VirtualHost *:80> ServerName not.my.real.server.name DocumentRoot /var/www/sinatra/public # Does not work: #Redirect webmail/ /usr/share/squirrelmail/ #<Directory /usr/share/squirrelmail> # Require all granted #</Directory> <Directory /var/www/sinatra/public> Order allow,deny Allow from all </Directory> </VirtualHost>

Read the article

Automatically reconnect to ODBC sources?

- by stefan.at.wpf

I am using Asterisk 1.8.10.1 and a MySQL database connected via ODBC to store CDRs. When my MySQL database isn't available when Asterisk starts or has an outage while Asterisk is running, I would expect Asterisk to retry to connect to the database, but this doesn't happen! Anyone knows where I can enable some kidn of automatic reconnect to databases in Asterisk? My res_odbc.conf looks like this: [asterisk] enabled => yes dsn => asterisk-connector username => user password => pass pre-connect => yes pooling => no limit => 1 idlecheck => 1 negative_connection_cache => 1

Read the article

Enabling ppolicy in openldap

- by nitins

For enabling ppolicy is in Openldap I am trying to import the policy given below. dn: ou=policies,dc=example,dc=in ou: policies objectClass: top objectClass: organizationalUnit # default, policies, example.in dn: cn=default,ou=policies,dc=example,dc=in objectClass: top objectClass: device objectClass: pwdPolicy cn: default pwdAttribute: userPassword pwdMaxAge: 7776002 pwdExpireWarning: 432000 pwdInHistory: 0 pwdCheckQuality: 1 pwdMinLength: 8 pwdMaxFailure: 5 pwdLockout: TRUE pwdLockoutDuration: 900 pwdGraceAuthNLimit: 0 pwdFailureCountInterval: 0 pwdMustChange: TRUE pwdAllowUserChange: TRUE pwdSafeModify: FALSE But I am getting the error given below. ldapadd -x -D "cn=Manager,dc=example,dc=in" -w xxxxxx -f /tmp/new-policy.ldif adding new entry "cn=default,ou=policies,dc=example,dc=in" ldapadd: Invalid syntax (21) additional info: pwdAttribute: value #0 invalid per syntax Any idea on why I am getting the error ? I have already added the ppolicy schema and module in slapd.conf

Read the article

CARP: two machines think they're the master, but only on one interface

- by Conor McDermottroe

I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

Read the article

How can I secure Postgres for remote access when not in a private network?

- by orokusaki

I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

Read the article

vsftpd chroot_local_user does nothing

- by Reinderien

I'm setting up a vsftpd server on: Linux 2.6.32-26-server #48-Ubuntu SMP Wed Nov 24 10:28:32 UTC 2010 x86_64 GNU/Linux When I set chroot_local_user=YES, there is no effect (I can still see / when I log in). There is nothing in syslog or /var/log/vsftpd.log to indicate what's wrong. I know that I'm editing the right conf file and that other settings do come into effect when I restart the daemon, because these work: ssl_enable=YES force_local_data_ssl=YES force_local_logins_ssl=YES Any idea what's wrong? Thanks. Edit: I've touched /etc/vsftpd.chroot_list for it to be empty (no chroot-denied users), and have added: chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list Then to restart: sudo /etc/init.d/vsftpd restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service vsftpd restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the restart(8) utility, e.g. restart vsftpd vsftpd start/running, process 5606 Still no effect.

Read the article

Exim queue in WHM

- by Xobb

Hi fellas, I've got the centos server with WHM. The mail server is exim. I need exim put all messages in queue and not sending directly.Though I've added the queue_only option to exim configuration and the messages are collected in the queue now. Afterwards I've found out that someone is calling exim -q to process the queue every once in a while. I've found the following cron job: 0 6 * * * /scripts/exim_tidydb > /dev/null 2>&1 which I beleive has been used to process the exim queue. Also I suspect that script was installed alongside with WHM. Surely I've commented it out and was expecting everything to work just fine. But that didn't happen. I still get the exim queue processed once in a while. Am I missing anything? What may cause my exim queue to process? Here is cat /etc/exim.conf | grep queue queue_only deliver_queue_load_max = 3 Thanks

Read the article

Postfix tutorial inconsistency

- by Desmond Hume

I'm following this tutorial to setup a Postfix/Dovecot mail server with Postfix Admin as a web front end. As regards directory structure for virtual mail users, the author of the tutorial writes: Virtual mail users are those that do not exist as Unix system users. They thus don't use the standard Unix methods of authentication or mail delivery and don't have home directories. That is how we are managing things here: mail users are defined in the database created by Postfix Admin rather than existing as system users. Mail will be kept in subfolders per domain and account under /var/vmail - e.g. [email protected] will have a mail directory of /var/vmail/example.com/me. But when he gives instructions about configuring Postfix Admin, he suggests this to be contained by Postfix Admin's config.inc.php: // Mailboxes // If you want to store the mailboxes per domain set this to 'YES'. // Examples: // YES: /usr/local/virtual/domain.tld/[email protected] // NO: /usr/local/virtual/[email protected] $CONF['domain_path'] = 'NO'; Is there an inconsistency?

Read the article

Should I replace libapache2-mod-php5-filter with libapache2-mod-php5 on Debian 6 Apache 2.2.16?

- by luison

Upgrading various virtual machines we are having an issue with the Debian package upgrade to version 2.2.16 The upgrade (surprisingly) seems to remove libapache2-mod-php5 replacing it with libapache2-mod-php5-filter. This gave us some headache as the php.ini was pointing to the "old" one and some of the apache.conf conditional module rules stopped working. We can fix all those but we can't figure out if there would be any issues if we just "reversed" this and simply install libapache2-mod-php5 again and load that module instead of the "filter" one or in there is anyway to "alias" a module. I tend to think that the change "has a reason" but after reading apache2 and php5: module or filter I understand the module differences are to do with post delivery security issues.

Read the article

Postfix smtp error 450 (failed to add recipient)

- by culter

I have debian server with postfix and roundcube. After an attack we are on 2 blacklists, but I don't think that this is the main problem. I can't send mail to any address. I tried to find the cause...I checked var/spool/postfix/etc/resolv.conf and resolv.etc and they're the same with this content: nameserver 127.0.0.1 nameserver localhost In var/log/mail.err I found: cyrus/imap[25452]: DBERROR: opening /var/lib/cyrus/user/m/[email protected]: cyrusdb error cyrus/imap[25452]: DBERROR: skiplist recovery /var/lib/cyrus/user/m/[email protected]: ADD at 1FC0 exists When I try to send email from roundcube, I get the message from title. When I send it within opera or any other mail client, It gives nothing, but email is'nt sended. Thank you for any advice.

Read the article

How to create public html (apache2) with LDAP authentication?

- by borjamf

Im running Apache2 on Ubuntu 12.04 Server because I want to create a home directory for each ldap user. I'm using LDAP for authentication and it's working ok. Also I've done some tests with LDAP module for Apache2 and it's working ok. The problem with this LDAP authentication is that any success login can access to ~user/public_html, even if the user is not the owner of that home. I dont know how to control that, for example, userldap2 access to userldap1/public_html. I want that only the userldap1 access to userldap1. Could anybody tell me how to control that with LDAP authentication? I hope that you'll understand me. My config (auth_ldap.conf) <Directory /home/disco2/*/public_html> AuthName "Authentication" AuthType basic AuthBasicProvider ldap AuthzLDAPAuthoritative off AuthLDAPURL ldap://prueba.borja/dc=prueba,dc=borja?uid? Require ldap-filter objectClass=posixAccount </Directory>

Read the article

Remote logging for multiple Apache virtual hosts using syslog-ng

- by James

I'm running a couple Apache web servers that each have 4-8 separate virtual hosts on each of them. I'm trying to setup a dedicated log server that stores each virtual host access and errors logs in a separate directory for that virtual host. For example on the logging server, /var/log/remove/10.0.0.2/virtualhost1 contains access_log and error_log /var/log/remove/10.0.0.2/virtualhost2 contains access_log and error_log /var/log/remove/10.0.0.3/virtualhost3 contains access_log and error_log and so on... Right now I have it split up by host but I can't figure out how to do it additionally by virtual host. Here are the relevant lines from the logging server's syslog-ng.conf source r_src { tcp(ip("0.0.0.0") port(5140)); }; destination r_all { file("/opt/splunk/logs/$HOST"); }; log { source(r_src); destination(r_all); }; Any help would be appreciated. Thanks!

Read the article

How can I disable reverse DNS in Apache 2?

- by Creighton Hale

I want to disable reverse DNS in Apache 2. I have done the following steps: In apache2/apache2.conf file ,HostnameLookups is set as OFF Tcpdump session confirmed thatApache was doing double reverse lookups even though the HostnameLookupsdirective was clearly turned off. No hostnames insites-available. The problem still remains. UPD: version of apache is dpkg -l | grep apache2 ii apache2-mpm-prefork 2.2.16-6+squeeze4 Apache HTTP Server - traditional non-threaded model ii apache2-utils 2.2.16-6+squeeze4 utility programs for webservers ii apache2.2-bin 2.2.16-6+squeeze4 Apache HTTP Server common binary files ii apache2.2-common 2.2.16-6+squeeze4 Apache HTTP Server common files apache2 -l Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c I think mod_security is not present.

Read the article

Why am I unable to turn off recursion in ISC BIND?

- by nbolton

Here's my named.conf.options file: options { directory "/var/cache/bind"; dnssec-enable yes; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; # disable recursion recursion no; }; I've tried adding allow-recursion { "none"; } before recursion but this also has no effect; I'm testing it by using nslookup on Windows, and using google.com. as the query (and it returns an IP, so I assume recursion is on). This issue occurs on two servers with similar setups.

Read the article

apache tomcat loadbalancing clustering on ubuntu

- by user740010

i am facing a problem in clustering the tomcat with apache as a loadbalancer using mod_jk on ubuntu. i have install apache2 on my ubuntu 11.04 and i have downloaded tomcat7 created two copies and kept them at two different location. 1st one is at /home/net4u/vishal/test/tomcatA 2nd one is at /home/net4u/vishal/test1/tomcatB i have made following changes to server.xml file in /conf folder 1. <Server port="8205" shutdown="SHUTDOWN"> 2. <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> 3.<Connector port="8209" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> 4. <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> similarly i have modified other tomcat i.e tomcatA server.xml content of the server.xml is as follow: --    <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB">   <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>  <Realm className="org.apache.catalina.realm.LockOutRealm">  <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true">    <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t "%r" %s %b" resolveHosts="false"/> </Host> </Engine> i have install libapache2-mod-jk step 1. i have Created jk.load file in /etc/apache2/mods-enabled/jk.load content is as follows: LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so Create /etc/apache2/mods-enabled/jk.conf: JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/jk.log JkMount /ecommerce/* worker1 JkMount /images/* worker1 JkMount /content/* worker1 step 2. Created workers.properties file in /etc/apache2/workers.properties content is as follows: workers.tomcat_home=/home/vishal/Desktop/test/tomcatA workers.java_home=/usr/lib/jvm/default-java ps=/ worker.list=tomcatA,tomcatB,loadbalancer worker.tomcatA.port=8109 worker.tomcatA.host=localhost worker.tomcatA.type=ajp13 worker.tomcatA.lbfactor=1 worker.tomcatB.port=8209 worker.tomcatB.host=localhost worker.tomcatB.type=ajp13 worker.tomcatB.lbfactor=1 worker.loadbalancer.type=lb worker.loadbalancer.balanced_workers=tomcatA,tomcatB worker.loadbalancer.sticky_session=1 i tried the same thing on the windows machine it is working.

Read the article

CentOS PAM+LDAP login and host attribute

- by pianisteg

My system is CentOS 6.3, openldap is configured well, PAM authorization works fine. But after turning pam_check_host_attr to yes, all LDAP-auths fail with message "Access denied for this host". hostname on the server returns correct value, the same value is listed in user's profile. "pam_check_host_attr no" works fine and allows everyone with correct uid/password a piece of /var/log/secure: Sep 26 05:33:01 ldap sshd[1588]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=my-host user=my-username Sep 26 05:33:01 ldap sshd[1588]: Failed password for my-username from 77.AA.BB.CC port 58528 ssh2 Sep 26 05:33:01 ldap sshd[1589]: fatal: Access denied for user my-username by PAM account configuration Another two servers (CentOS 5.7 Debian) authorizes on this LDAP server correctly. Even with pam_check_host_attr yes! I didn't edit /etc/security/access.conf, it is empty, only default comments. I don't know what to do! How to fix this?

Read the article

Touch Screen Ubuntu 10.04LTS

- by WalterJ89

I'm trying to get a touch screen working with Ubuntu 10.04LTS (64bit) -it is a serial touchsceen, connected at /dev/ttyS0 ,i know that works because I get garbage in the terminal when I enable it. -before the screen used a 3m driver (I believe) in XP. My knowledge of Linux is passive so I generally pick up something when I need it. To get this working I came accross a lot of tutorials (a lot outdated a bit), I'm still at a loss to get this work. I'm not sure where to put linux drivers (/usr/ or /dev/?) most tutorials kind of skip over that part. I have tried editing the /etc/X11/xorg.conf unsuccessfully. I'm not sure what the syntax for that is supposed to be. Thank You

Read the article

Is there any way to use arrays in a puppet module (not in template)?

- by KARASZI István

I want to use puppet to manage a hadoop cluster. On the machines we have several directories which must be created and set permissions. But i'm unable to add array values for defined methods. define hdfs_site( $dirs ) { file { $dirs: ensure => directory, owner => "hadoop", group => "hadoop", mode => 755; } file { "/opt/hadoop/conf/hdfs-site.xml": content => template("hdfs-site.xml.erb"), owner => "root", group => "root", mode => 644; } } define hadoop_slave( $mem, $cpu, $dirs ) { hadoop_base { mem => $mem, cpu => $cpu, } hdfs_site { dirs => $dirs, } } hadoop_base is similar to hdfs_site. Thanks!

Read the article

SVN check out to samba directory

- by Jon H

I'm trying to svn co to a directory on Ubuntu, shared via samba, to OS X, but I get the following error (in OS X). svn: In directory 'site/product/tests' svn: Can't open file 'site/product/tests/.svn/tmp/text-base/._base.py.svn-base': No such file or directory My smb.conf file includes the following changes: unix extensions = no browseable = yes public = yes writable = yes delete readonly = yes create mask = 0775 directory mask = 0775 valid users = %S read only = no The checkout works fine locally (on the Ubuntu machine). What am I missing? More detail: Later inspection showed that the svn error couldn't find the file with 3, then 2 underscores: .___init__.py.svn-base Whereas listing the directory in OS X showed 2, then 2 underscores: __init__.py.svn-base And listing the same directory in a successful checkout on Ubuntu shows nothing (because it's a temporary directory?) I've tried the mangled = no setting in share settings, to no effect.

Read the article

logrotate by size outside the daily schedule

- by Josh Smeaton

We have a couple of applications that generate huge log files. It's not enough to rotate those logs daily, so I created the following logrotate conf: /var/log/ourapp/*log { compress copytruncate missingok size 200M rotate 10 } The idea is that we can keep 2GB of logs for this one application, no matter how quickly those files are filling up. The problem, though, is that logrotate only runs once daily. AFAIK, when logrotate kicks off at 4am, it will check to see that the size is at least 200M and rotate it if so. Ideally logrotate would run every minute, check the size, and rotate if the size is greater. Is there a standard way for rotating based on size outside of the daily cron schedule?

Read the article

Why is Mac OS X 10.6 using /usr/lib to start Apache when I compiled PHP using /opt/local/lib?

- by Anthony

PHP 5.3.3 compiled on Mac OS X 10.6 - using /usr/lib when trying to start Apache... rather than /opt/local/lib specified when PHP was configured. Why is it trying to load from /usr/lib when I specified in my configure not to? httpd: Syntax error on line 115 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/libphp5.so into server: dlopen(/usr/libexec/apache2/libphp5.so, 10): Library not loaded: /opt/local/lib/libiconv.2.dylib\n Referenced from: /usr/libexec/apache2/libphp5.so\n Reason: Incompatible library version: libphp5.so requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 The error message above refers to /opt/local/lib which when I run: otool -LD /opt/local/lib/libiconv.2.dylib Message: /opt/local/lib/libiconv.2.dylib: /opt/local/lib/libiconv.2.dylib (compatibility version 8.0.0, current version 8.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.0) It shows that the version is different than what httpd is erring out as. I have a feeling I need to recompile Apache using newer libraries, but the error message still doesn't make too much sense to me.

Read the article

Linux Bridge, Samba netbios name/hostname access

- by Christopher Wilson

I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

Read the article

apache generating to many rotatelogs.exe on Windows?

- by Patrick

I'm seeing some odd behavior with Apache's rotatelogs.exe. On one of my servers I'm seeing multiple rotatelogs.exe counting into the 100's. Normally I usually only see 6 which I can rationalize to the 3 logs I have rotating. Does anyone know why this might be happening and how I can prevent it from happening. When the rotatelogs.exe processes get up into the 100's everything slows down and Apache is effectively shutdown because it can't process requests anymore. We are using the following line in our httpd.conf file: ErrorLog "|\"C:/Program Files/Apache2/bin/rotatelogs.exe\" \"C:/Program Files/Apache2/logs/error_log.%Y-%m-%d-%H_%M_%S\" 20M" Thanks in advance for the help!

Read the article

How to disable horizontal scrolling within virtualbox on Ubuntu guest, Windows 7 host?

- by Steven Rosato

I am using Windows 7 as Host, Ubuntu Karmic as guest OS with guest tools installed and I get an annoying glitch when switching from host to the guest machine: Vertical scrolling switches to horizontal! (using the mouse wheel). Since I don't really care about horizontal scrolling, how can I disable this? I have checked the web and the only thing I found was to play in the xorg.conf file and adding in the section "InputDevice" Option "ZAxisMapping" "4 5" which would enable vertical scrolling only. The thing is, I don't have that section in my config file so I guessed that I would need to add Section "InputDevice" Identifier "VBoxMouse" Driver "vboxmouse" Option "ZAxisMapping" "4 5" EndSection But that does not seem to work after restarting xserver. Any workaround for this?

Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 115/194 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >

- by itsadok

- by Kenneth

- by stefan.at.wpf

- by nitins

- by Conor McDermottroe

- by orokusaki

- by Reinderien

- by Xobb

- by Desmond Hume

- by luison

- by culter

- by borjamf

- by James

- by Creighton Hale

- by nbolton

- by user740010

- by pianisteg

- by WalterJ89

- by KARASZI István

- by Jon H

- by Josh Smeaton

- by Anthony

- by Christopher Wilson

- by Patrick

- by Steven Rosato

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >