Search Results

Search found 19278 results on 772 pages for 'enum support'.

Page 115/772 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >

Browser-Based - "Easy Application Attachments"

Incorporate BLOB support in Oracle Application Express.

Read the article
10 Steps to access Oracle stored procedures from Crystal Reports

Requirements to access Oracle stored procedures from CR The following requirements must be met in order for CR to access an Oracle stored procedure: 1. You must create a package that defines the REF CURSOR. This REF CURSOR must be strongly bound to a static pre-defined structure (see Strongly Bound REF CURSORs vs Weakly Bound REF CURSORs). This package must be created separately and before the creation of the stored procedure. NOTE Crystal Reports 9 native connections will support Oracle stored procedures created within packages as well as Oracle stored procedures referencing weakly bound REF CURSORs. Crystal Reports 8.5 native connections will support Oracle stored procedures referencing weakly bound REF CURSORs. 2. The procedure must have a parameter that is a REF CURSOR type. This is because CR uses this parameter to access and define the result set that the stored procedure returns. 3. The REF CURSOR parameter must be defined as IN OUT (read/write mode). After the procedure has opened and assigned a query to the REF CURSOR, CR will perform a FETCH call for every row from the query's result. This is why the parameter must be defined as IN OUT. 4. Parameters can only be input (IN) parameters. CR is not designed to work with OUT parameters. 5. The REF CURSOR variable must be opened and assigned its query within the procedure. 6. The stored procedure can only return one record set. The structure of this record set must not change, based on parameters. 7. The stored procedure cannot call another stored procedure. 8. If using an ODBC driver, it must be the CR Oracle ODBC driver (installed by CR). Other Oracle ODBC drivers (installed by Microsoft or Oracle) may not function correctly. 9. If you are using the CR ODBC driver, you must ensure that in the ODBC Driver Configuration setup, under the Advanced Tab, the option 'Procedure Return Results' is checked ON. 10. If you are using the native Oracle driver and using hard-coded date selection within the procedure, the date selection must use either a string representation format of 'YYYY-DD-MM' (i.e. WHERE DATEFIELD = '1999-01-01') or the TO_DATE function with the same format specified (i.e. WHERE DATEFIELD = TO_DATE ('1999-01-01','YYYY-MM-DD'). For more information, refer to kbase article C2008023. 11. Most importantly, this stored procedure must execute successfully in Oracle's SQL*Plus utility. If all of these conditions are met, you must next ensure you are using the appropriate database driver. Please refer to the sections in this white paper for a list of acceptable database drivers. span.fullpost {display:none;}

Read the article
10 Steps to access Oracle stored procedures from Crystal Reports

Requirements to access Oracle stored procedures from CR The following requirements must be met in order for CR to access an Oracle stored procedure: 1. You must create a package that defines the REF CURSOR. This REF CURSOR must be strongly bound to a static pre-defined structure (see Strongly Bound REF CURSORs vs Weakly Bound REF CURSORs). This package must be created separately and before the creation of the stored procedure. NOTE Crystal Reports 9 native connections will support Oracle stored procedures created within packages as well as Oracle stored procedures referencing weakly bound REF CURSORs. Crystal Reports 8.5 native connections will support Oracle stored procedures referencing weakly bound REF CURSORs. 2. The procedure must have a parameter that is a REF CURSOR type. This is because CR uses this parameter to access and define the result set that the stored procedure returns. 3. The REF CURSOR parameter must be defined as IN OUT (read/write mode). After the procedure has opened and assigned a query to the REF CURSOR, CR will perform a FETCH call for every row from the query's result. This is why the parameter must be defined as IN OUT. 4. Parameters can only be input (IN) parameters. CR is not designed to work with OUT parameters. 5. The REF CURSOR variable must be opened and assigned its query within the procedure. 6. The stored procedure can only return one record set. The structure of this record set must not change, based on parameters. 7. The stored procedure cannot call another stored procedure. 8. If using an ODBC driver, it must be the CR Oracle ODBC driver (installed by CR). Other Oracle ODBC drivers (installed by Microsoft or Oracle) may not function correctly. 9. If you are using the CR ODBC driver, you must ensure that in the ODBC Driver Configuration setup, under the Advanced Tab, the option 'Procedure Return Results' is checked ON. 10. If you are using the native Oracle driver and using hard-coded date selection within the procedure, the date selection must use either a string representation format of 'YYYY-DD-MM' (i.e. WHERE DATEFIELD = '1999-01-01') or the TO_DATE function with the same format specified (i.e. WHERE DATEFIELD = TO_DATE ('1999-01-01','YYYY-MM-DD'). For more information, refer to kbase article C2008023. 11. Most importantly, this stored procedure must execute successfully in Oracle's SQL*Plus utility. If all of these conditions are met, you must next ensure you are using the appropriate database driver. Please refer to the sections in this white paper for a list of acceptable database drivers. span.fullpost {display:none;}

Read the article
Looking for USB Network Attached Storage (NAS) Adapter that supports multiple drives, NTFS/FAT32 fil

- by braveterry

I'm looking for a NAS Adapter that supports attaching multiple USB devices to the network. Here's what I'd like to see in a NAS adapter: Under $100.00. Support for multiple devices. This can be through a USB hub or through multiple USB connectors on the device itself. Bittorrent support would be nice, but this isn't a deal-breaker. Filesystem support for at least NTFS or FAT32. I'd prefer to not have to reformat to use the device, but this is also not a deal-breaker. Here is what I am NOT looking for: I'm NOT looking for a NAS enclosure. I already have a couple of spare external USB drives that I'd like to use. I'm NOT looking for a networked USB hub like the one mentioned here. Network USB hubs only allow access to a drive from one PC at a time. I'm NOT looking for a wireless router with a NAS built in. I already have a wireless router, and I'd rather not go through the hassle of replacing it if possible. What I've looked at so far PogoPlug: This supports multiple devices via a USB hub, but there's not Bittorrent support. It's $99.00, so I may end up going with this and hope that they patch in Bittorrent support later. Addonics NAS Adapter: This supports only one device per adapter, so it's a non-starter. SimpleNET NAS Head USB 2.0 Portable Dongle: I'm not 100% sure this supports multiple devices. Plus there doesn't seem to be any Bittorrent support. I'll try to update this post as I explore other devices.

Read the article
configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

- by Wayne

vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

Read the article
Remote assistance from Remote Desktop sessions: unable to control

- by syneticon-dj

Since Remote Control (aka Session Shadowing) is gone for good in Server 2012 Remote Desktop Session hosts, I am looking for a replacement to support users in a cross-domain environment. Since Remote Assistance is supposed to work for Remote Desktop Sessions as well, I tried leveraging that for support purposes by enabling unsolicited remote assistance for all Remote Desktop Session Hosts via Group Policy. All seems to be working well except that the "expert" seems to be unable to actually excercise any mouse or keyboard control when the remote assistance session has been initiated from a Remote Desktop session itself. Mouse clicks and keyboard strokes from the "expert" session (Server 2012) seem to simply be ignored even after the assisted user has acknowledged the request for control. I would like to see this working through RD sessions for the support staff due to a number of reasons: not every support agent would have the appropriate client system version to support users on a specific terminal server (e.g. an agent might have a Windows Vista or Windows 7 station and thus be unable to offer assistance to users on Server 2012 RDSHs) a support agent would not necessarily have a station which is a member of the specific destination domain (mainly due to the reason that more than a single domain's users are supported) what am I missing?

Read the article
pam auth via winbind, howto map primary group for users?

- by dr gonzo

I have unix users authenticating to an PDC (via winbind) and want to have the primary group of those users a local unix group (e.g. www-data). users have the group "domain users" with gid 10006 (as the gid winbind mapping) idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum groups = yes winbind enum users = yes winbind use default domain = yes winbind nested groups = yes but want that the primary group is 33 for all users (www-data) how to achieve that?

Read the article
NetAdvantage - jQuery, ASP .NET MVC and HTML5 UI Components released for Web Developers

Built for speed and portability across operating systems, iPad/tablets, desktops and multi-browser support. Includes controls for ASP .NET MVC and uses the latest technologies like HTML 5 & CSS 3. This preview includes a sampling of powerful UI controls: grid, date picker, rating, editors, even a video player! All work with the popular WebKit engine that underpins many modern desktop browsers without requiring plug-ins or extensions. The grid embraces the latest Web techniques and frameworks like jQuery Client Templates and DOM virtualization. Download these essentials for jQuery and ASP .NET MVC from us today. span.fullpost {display:none;}

Read the article
C# Secure Sockets (SSL)

- by Matthias Vance

LS, I was planning on writing a wrapper around the System.Net.Sockets.Socket class, because I didn't feel like using the SSLStream class because I wanted to maintain backwards compatibility with other programs. I found an article which does exactly what I want, but on Windows Mobile. (Link: Enable SSL for managed socket on windows mobile) Quote: My first surprise was that SetSocketOption takes a SocketOptionName enum value as the second parameter, but this enum doesn’t have the equivalent of SO_SECURE. However, C# was nice enough to let me cast an arbitrary integer value to the enum I needed. I tried to do the same, but it doesn't work. Code: private const ushort SO_SECURE = 0x2001; private const ushort SO_SEC_SSL = 0x2004; this.SetSocketOption(SocketOptionLevel.Socket, (SocketOptionName) SO_SECURE, SO_SEC_SSL); Error: An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call Is there a way to work around this? Kind regards, Matthias Vance

Read the article
Mapping Enums to Database with NHibernate/Castle ActiveRecord

- by Mike

There's a few other posts on mapping Enums to the DB with ActiveRecord, but none of them answer my question. I have an enum called OrderState: public enum OrderState {InQueue, Ordered, Error, Cancelled} And I have the following property on the table: [Property(NotNull = true, SqlType = "orderstate", ColumnType = "DB.EnumMapper, WebSite")] public OrderState State { get { return state; } set { state = value; } } And I have the following type class: public class EnumMapper : NHibernate.Type.EnumStringType<OrderState> { public EnumMapper() { } public override NHibernate.SqlTypes.SqlType SqlType { get { return new NHibernate.SqlTypes.SqlType(DbType.Object); } } } Now this actually works the way I want, but the problem is I have tons of enums and I don't want to create a EnumMapper class for each one of them. Isn't there some way to just tell ActiveRecord to use DbType.Object for any enum? It seems to either want to be an integer or a string, but nothing else. This one's been driving me crazy for the last 2 hours.. Mike

Read the article
Exposing .NET enums to COM clients{VBScript}

- by Codex

Am trying create of PoC for exposing/invoking various .NET objects from COM clients. The .NET library contains some classes and Enums. Am able to successfully access the classes in VBScript but not able to access the Enums. I know that Enums are value types and hence 'CreateObject' wont work in this case. But am able to access the same Enum in VBA code. Questions: How can I access the enums in VBScript? Why does the behaviour differ in the two COM clients? If VBA object browser can see the enum, why cant VBScript allow me to create one? .NET [ComVisible(true)] [GuidAttribute("ebc25cf6-9120-4283-b972-0e5520d0000E")] public enum Currency { GBP = CurrencyConvertorBL.CurrencyConvertorRef.Currency.GBP, USD = CurrencyConvertorBL.CurrencyConvertorRef.Currency.USD, INR = CurrencyConvertorBL.CurrencyConvertorRef.Currency.INR, AUD = CurrencyConvertorBL.CurrencyConvertorRef.Currency.AUD } VBA Private Function ConvertCurrency(fromCurrency As Currency, toCurrency As Currency) As Double VBScript ??? Set currencyConvertorCCY = CreateObject("CurrencyConvertorBL.Currency") Thanks in advance.

Read the article
Implementing toString on Java enums

- by devoured elysium

Hello It seems to be possible in Java to write something like this: private enum TrafficLight { RED, GREEN; public String toString() { return //what should I return here if I want to return //"abc" when red and "def" when green? } } Now, I'd like to know if it possible to returnin the toString method "abc" when the enum's value is red and "def" when it's green. Also, is it possible to do like in C#, where you can do this?: private enum TrafficLight { RED = 0, GREEN = 15 ... } I've tried this but it but I'm getting compiler errors with it. Thanks

Read the article
Error in SQL Syntax ERROR1064

- by 01010011

Hi, Everytime I try to create the following table in MySQL command line: CREATE TABLE book(book_id int NOT NULL AUTO_INCREMENT PRIMARY KEY, isbn char(20), title char(20), author_f_name char(20), author_l_name char(20), condition ENUM("as new","very good","good","fair","poor"), price decimal(8,2), genre char(20)); I keep getting this error message: ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL version for the right syntax to use near 'condition ENUM("as new","very good","good","fair","poor"), price decimal(8,2), g' at line 6 I've tried using single quotes and double quotes for the ENUM options. Where did I go wrong?

Read the article
Enums and Annotations

- by PeterMmm

I want to use an Annotation in compile-safe form. To pass the value() to the Annotation i want to use the String representation of an enum. Is there a way to use @A with a value from enum E ? public class T { public enum E { a,b; } // C1: i want this, but it won't compile @A(E.a) void bar() { // C2: no chance, it won't compile @A(E.a.toString()) void bar2() { } // C3: this is ok @A("a"+"b") void bar3() { } // C4: is constant like C3, is'nt it ? @A(""+E.a) void bar4() { } } @interface A { String value(); }

Read the article
About enumerations in Delphi and c++ in 64-bit environments

- by sum1stolemyname

I recently had to work around the different default sizes used for enumerations in Delphi and c++ since i have to use a c++ dll from a delphi application. On function call returns an array of structs (or records in delphi), the first element of which is an enum. To make this work, I use packed records (or aligned(1)-structs). However, since delphi selects the size of an enum-variable dynamically by default and uses the smallest datatype possible (it was a byte in my case), but C++ uses an int for enums, my data was not interpreted correctly. Delphi offers a compiler switch to work around this, so the declaration of the enum becomes {$Z4} TTypeofLight = ( V3d_AMBIENT, V3d_DIRECTIONAL, V3d_POSITIONAL, V3d_SPOT ); {$Z1} My Questions are: What will become of my structs when they are compiled on/for a 64-bit environment? Does the default c++ integer grow to 8 Bytes? Are there other memory alignment / data type size modifications (other than pointers)?

Read the article
Enums,use in switch case

- by WPS

Hi, I have an Enum defined which contains method return type like "String",Float,List,Double etc. I will be using it in switch case statements. For example my enum is public enum MethodType { DOUBLE,LIST,STRING,ARRAYLIST,FLOAT,LONG; } In a property file, I've key value pairs as follows. Test1=String Test2=Double In my code I'm getting the value for the key. I need to use the VALUE in Switch Case to Determine the Type and based on that I've to implement some logic. For example something like this switch(MethodType.DOUBLE){ case DOUBLE: //Dobule logic } Can someone please help me to implement this?

Read the article
How to use switch statement with Enumerations C#

- by Maximus Decimus

I want to use a switch statement in order to avoid many if's. So I did this: public enum Protocol { Http, Ftp } string strProtocolType = GetProtocolTypeFromDB(); switch (strProtocolType) { case Protocol.Http: { break; } case Protocol.Ftp: { break; } } but I have a problem of comparing an Enum and a String. So if I added Protocol.Http.ToString() there is another error because it allows only CONSTANT evaluation. If I change it to this switch (Enum.Parse(typeof(Protocol), strProtocolType)) It's not possible also. So, it's possible to use in my case a switch statement or not?

Read the article
Very difficult SQL query

- by db666

For the following table definitions: Name Null? Type Comments ------------------------------- -------- ---- ------------------------------------ ENUM NOT NULL NUMBER(4) ENUM should not exceed a length of 4. ENAME CHAR(15) ADDRESS CHAR(25) ADDRESS should not exceed 25 characters. SALARY NUMBER(5) OFFICE CHAR(4) DNUM NOT NULL NUMBER(4) Department which this employee belongs to department Name Null? Type Comments ------------------------------- -------- ---- ------------------------------------- DNUM NOT NULL NUMBER(4) DMGR NOT NULL NUMBER(4) Department manager DNAME NOT NULL CHAR(15) project Name Null? Type Comments ------------------------------- -------- ---- ------------------------------------- PNUM NOT NULL NUMBER(4) PMGR NOT NULL NUMBER(4) Project manager PTITLE NOT NULL CHAR(15) emp_proj Name Null? Type ------------------------------- -------- ---- PNUM NOT NULL NUMBER(4) ENUM NOT NULL NUMBER(4) I have to write SQL query which will find the names of employees who do not share an office but work on the same project, and have different salaries... I've spent last three days trying to figure out something, but no idea as far. I will appreciate any advice.

Read the article
iptables management tools for large scale environment

- by womble

The environment I'm operating in is a large-scale web hosting operation (several hundred servers under management, almost-all-public addressing, etc -- so anything that talks about managing ADSL links is unlikely to work well), and we're looking for something that will be comfortable managing both the core ruleset (around 12,000 entries in iptables at current count) plus the host-based rulesets we manage for customers. Our core router ruleset changes a few times a day, and the host-based rulesets would change maybe 50 times a month (across all the servers, so maybe one change per five servers per month). We're currently using filtergen (which is balls in general, and super-balls at our scale of operation), and I've used shorewall in the past at other jobs (which would be preferable to filtergen, but I figure there's got to be something out there that's better than that). The "musts" we've come up with for any replacement system are: Must generate a ruleset fairly quickly (a filtergen run on our ruleset takes 15-20 minutes; this is just insane) -- this is related to the next point: Must generate an iptables-restore style file and load that in one hit, not call iptables for every rule insert Must not take down the firewall for an extended period while the ruleset reloads (again, this is a consequence of the above point) Must support IPv6 (we aren't deploying anything new that isn't IPv6 compatible) Must be DFSG-free Must use plain-text configuration files (as we run everything through revision control, and using standard Unix text-manipulation tools are our SOP) Must support both RedHat and Debian (packaged preferred, but at the very least mustn't be overtly hostile to either distro's standards) Must support the ability to run arbitrary iptables commands to support features that aren't part of the system's "native language" Anything that doesn't meet all these criteria will not be considered. The following are our "nice to haves": Should support config file "fragments" (that is, you can drop a pile of files in a directory and say to the firewall "include everything in this directory in the ruleset"; we use configuration management extensively and would like to use this feature to provide service-specific rules automatically) Should support raw tables Should allow you to specify particular ICMP in both incoming packets and REJECT rules Should gracefully support hostnames that resolve to more than one IP address (we've been caught by this one a few times with filtergen; it's a rather royal pain in the butt) The more optional/weird iptables features that the tool supports (either natively or via existing or easily-writable plugins) the better. We use strange features of iptables now and then, and the more of those that "just work", the better for everyone.

Read the article
Spring @Transactional not creating required transaction

- by Steve

Ok, so I've finally bowed to peer pressure and started using Spring in my web app :-)... So I'm trying to get the transaction handling stuff to work, and I just can't seem to get it. My Spring configuration looks like this: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd"> <bean id="groupDao" class="mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao" lazy-init="true"> <property name="entityManagerFactory" ><ref bean="entityManagerFactory"/></property> </bean>  <bean class="org.springframework.beans.factory.annotation.RequiredAnnotationBeanPostProcessor"/>  <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor"/>  <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalEntityManagerFactoryBean"> <property name="persistenceUnitName" value="CONOPS_PU" /> </bean>  <bean id="jpaTransactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory"/> </bean>  <tx:annotation-driven transaction-manager="jpaTransactionManager" proxy-target-class="true"/> </beans> persistence.xml: <?xml version="1.0" encoding="UTF-8"?> <persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="CONOPS_PU" transaction-type="RESOURCE_LOCAL"> <provider>org.hibernate.ejb.HibernatePersistence</provider> ... Class mappings removed for brevity... <properties> <property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect"/> <property name="hibernate.connection.autocommit" value="false"/> <property name="hibernate.connection.username" value="****"/> <property name="hibernate.connection.password" value="*****"/> <property name="hibernate.connection.driver_class" value="oracle.jdbc.OracleDriver"/> <property name="hibernate.connection.url" value="jdbc:oracle:thin:@*****:1521:*****"/> <property name="hibernate.cache.provider_class" value="org.hibernate.cache.NoCacheProvider"/> <property name="hibernate.hbm2ddl.auto" value="create"/> <property name="hibernate.show_sql" value="true"/> <property name="hibernate.format_sql" value="true"/> </properties> </persistence-unit> </persistence> The DAO method to save my domain object looks like this: @Transactional(propagation=Propagation.REQUIRES_NEW) protected final T saveOrUpdate (T model) { EntityManager em = emf.createEntityManager ( ); EntityTransaction trans = em.getTransaction ( ); System.err.println ("Transaction isActive () == " + trans.isActive ( )); if (em != null) { try { if (model.getId ( ) != null) { em.persist (model); em.flush (); } else { em.merge (model); em.flush (); } } finally { em.close (); } } return (model); } So I try to save a copy of my Group object using the following code in my test case: context = new ClassPathXmlApplicationContext(configs); dao = (GroupDao)context.getBean("groupDao"); dao.saveOrUpdate (new Group ()); This bombs with the following exception: javax.persistence.TransactionRequiredException: no transaction is in progress at org.hibernate.ejb.AbstractEntityManagerImpl.flush(AbstractEntityManagerImpl.java:301) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.orm.jpa.ExtendedEntityManagerCreator$ExtendedEntityManagerInvocationHandler.invoke(ExtendedEntityManagerCreator.java:341) at $Proxy26.flush(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GenericJPADao.saveOrUpdate(GenericJPADao.java:646) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao.save(GroupDao.java:641) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao$$FastClassByCGLIB$$50343b9b.invoke() at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149) at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao$$EnhancerByCGLIB$$7359ba58.save() at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDaoTest.testGroupDaoSave(GroupDaoTest.java:91) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at junit.framework.TestCase.runTest(TestCase.java:164) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) In addition, I get the following warnings when Spring first starts. Since these reference the entityManagerFactory and the transactionManager, they probably have some bearing on the problem, but I've no been able to decipher them enough to know what: Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'entityManagerFactory' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'entityManagerFactory' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'jpaTransactionManager' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean '(inner bean)' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean '(inner bean)' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'org.springframework.transaction.interceptor.TransactionAttributeSourceAdvisor' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@37003700: defining beans [groupDao,org.springframework.beans.factory.annotation.RequiredAnnotationBeanPostProcessor,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor,entityManagerFactory,jpaTransactionManager,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.interceptor.TransactionAttributeSourceAdvisor]; root of factory hierarchy Does anyone have any idea what I'm missing? I'm totally stumped... Thanks

Read the article
BeanCreationException in Spring Framework .WAR deploy to Tomcat 6 on Ubuntu 9.10

- by JediPotPie

I am in the process of switching from a Windows box to Ubunutu and I want to run my own local instance of Tomcat 6. I have installed Tomcat 6 without any basic issues. When I try to deploy a .war file that I had running on the Tomcat 6 instance on my Windows box I am getting the following error.... Apr 26, 2010 3:30:27 PM org.apache.catalina.core.ApplicationContext log INFO: Initializing Spring root WebApplicationContext Apr 26, 2010 3:30:27 PM org.apache.catalina.core.StandardContext listenerStart SEVERE: Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener org.springframework.beans.factory.CannotLoadBeanClassException: Cannot find class [com.ameren.eam.ldap.LdapDAONovellImpl] for bean with name 'testNovellDao' defined in ServletContext resource [/WEB-INF/applicationContext.xml]; nested exception is java.lang.ClassNotFoundException: com.ameren.eam.ldap.LdapDAONovellImpl at org.springframework.beans.factory.support.AbstractBeanFactory.resolveBeanClass(AbstractBeanFactory.java:1173) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.predictBeanType(AbstractAutowireCapableBeanFactory.java:479) at org.springframework.beans.factory.support.AbstractBeanFactory.isFactoryBean(AbstractBeanFactory.java:787) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:393) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:736) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:369) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:261) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3934) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4429) at org.apache.catalina.manager.ManagerServlet.start(ManagerServlet.java:1249) at org.apache.catalina.manager.HTMLManagerServlet.start(HTMLManagerServlet.java:612) at org.apache.catalina.manager.HTMLManagerServlet.doGet(HTMLManagerServlet.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:537) at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301) at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283) at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56) at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189) at java.security.AccessController.doPrivileged(Native Method) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:636) Caused by: java.lang.ClassNotFoundException: com.ameren.eam.ldap.LdapDAONovellImpl at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1399) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1245) at org.springframework.util.ClassUtils.forName(ClassUtils.java:230) at org.springframework.beans.factory.support.AbstractBeanDefinition.resolveBeanClass(AbstractBeanDefinition.java:381) at org.springframework.beans.factory.support.AbstractBeanFactory.resolveBeanClass(AbstractBeanFactory.java:1170) ... 40 more The class that is not being found is located at /WEB-INF/classes/com/ameren/eam/ldap/LdapDAONovellImpl.class relative to /WEB-INF/applicationContext.xml. I cannot figure out why it cannot find the class? Any ideas would be great.

Read the article
New features of C# 4.0

This article covers New features of C# 4.0. Article has been divided into below sections. Introduction. Dynamic Lookup. Named and Optional Arguments. Features for COM interop. Variance. Relationship with Visual Basic. Resources. Other interested readings… 22 New Features of Visual Studio 2008 for .NET Professionals 50 New Features of SQL Server 2008 IIS 7.0 New features Introduction It is now close to a year since Microsoft Visual C# 3.0 shipped as part of Visual Studio 2008. In the VS Managed Languages team we are hard at work on creating the next version of the language (with the unsurprising working title of C# 4.0), and this document is a first public description of the planned language features as we currently see them. Please be advised that all this is in early stages of production and is subject to change. Part of the reason for sharing our plans in public so early is precisely to get the kind of feedback that will cause us to improve the final product before it rolls out. Simultaneously with the publication of this whitepaper, a first public CTP (community technology preview) of Visual Studio 2010 is going out as a Virtual PC image for everyone to try. Please use it to play and experiment with the features, and let us know of any thoughts you have. We ask for your understanding and patience working with very early bits, where especially new or newly implemented features do not have the quality or stability of a final product. The aim of the CTP is not to give you a productive work environment but to give you the best possible impression of what we are working on for the next release. The CTP contains a number of walkthroughs, some of which highlight the new language features of C# 4.0. Those are excellent for getting a hands-on guided tour through the details of some common scenarios for the features. You may consider this whitepaper a companion document to these walkthroughs, complementing them with a focus on the overall language features and how they work, as opposed to the specifics of the concrete scenarios. C# 4.0 The major theme for C# 4.0 is dynamic programming. Increasingly, objects are “dynamic” in the sense that their structure and behavior is not captured by a static type, or at least not one that the compiler knows about when compiling your program. Some examples include a. objects from dynamic programming languages, such as Python or Ruby b. COM objects accessed through IDispatch c. ordinary .NET types accessed through reflection d. objects with changing structure, such as HTML DOM objects While C# remains a statically typed language, we aim to vastly improve the interaction with such objects. A secondary theme is co-evolution with Visual Basic. Going forward we will aim to maintain the individual character of each language, but at the same time important new features should be introduced in both languages at the same time. They should be differentiated more by style and feel than by feature set. The new features in C# 4.0 fall into four groups: Dynamic lookup Dynamic lookup allows you to write method, operator and indexer calls, property and field accesses, and even object invocations which bypass the C# static type checking and instead gets resolved at runtime. Named and optional parameters Parameters in C# can now be specified as optional by providing a default value for them in a member declaration. When the member is invoked, optional arguments can be omitted. Furthermore, any argument can be passed by parameter name instead of position. COM specific interop features Dynamic lookup as well as named and optional parameters both help making programming against COM less painful than today. On top of that, however, we are adding a number of other small features that further improve the interop experience. Variance It used to be that an IEnumerable<string> wasn’t an IEnumerable<object>. Now it is – C# embraces type safe “co-and contravariance” and common BCL types are updated to take advantage of that. Dynamic Lookup Dynamic lookup allows you a unified approach to invoking things dynamically. With dynamic lookup, when you have an object in your hand you do not need to worry about whether it comes from COM, IronPython, the HTML DOM or reflection; you just apply operations to it and leave it to the runtime to figure out what exactly those operations mean for that particular object. This affords you enormous flexibility, and can greatly simplify your code, but it does come with a significant drawback: Static typing is not maintained for these operations. A dynamic object is assumed at compile time to support any operation, and only at runtime will you get an error if it wasn’t so. Oftentimes this will be no loss, because the object wouldn’t have a static type anyway, in other cases it is a tradeoff between brevity and safety. In order to facilitate this tradeoff, it is a design goal of C# to allow you to opt in or opt out of dynamic behavior on every single call. The dynamic type C# 4.0 introduces a new static type called dynamic. When you have an object of type dynamic you can “do things to it” that are resolved only at runtime: dynamic d = GetDynamicObject(…); d.M(7); The C# compiler allows you to call a method with any name and any arguments on d because it is of type dynamic. At runtime the actual object that d refers to will be examined to determine what it means to “call M with an int” on it. The type dynamic can be thought of as a special version of the type object, which signals that the object can be used dynamically. It is easy to opt in or out of dynamic behavior: any object can be implicitly converted to dynamic, “suspending belief” until runtime. Conversely, there is an “assignment conversion” from dynamic to any other type, which allows implicit conversion in assignment-like constructs: dynamic d = 7; // implicit conversion int i = d; // assignment conversion Dynamic operations Not only method calls, but also field and property accesses, indexer and operator calls and even delegate invocations can be dispatched dynamically: dynamic d = GetDynamicObject(…); d.M(7); // calling methods d.f = d.P; // getting and settings fields and properties d[“one”] = d[“two”]; // getting and setting thorugh indexers int i = d + 3; // calling operators string s = d(5,7); // invoking as a delegate The role of the C# compiler here is simply to package up the necessary information about “what is being done to d”, so that the runtime can pick it up and determine what the exact meaning of it is given an actual object d. Think of it as deferring part of the compiler’s job to runtime. The result of any dynamic operation is itself of type dynamic. Runtime lookup At runtime a dynamic operation is dispatched according to the nature of its target object d: COM objects If d is a COM object, the operation is dispatched dynamically through COM IDispatch. This allows calling to COM types that don’t have a Primary Interop Assembly (PIA), and relying on COM features that don’t have a counterpart in C#, such as indexed properties and default properties. Dynamic objects If d implements the interface IDynamicObject d itself is asked to perform the operation. Thus by implementing IDynamicObject a type can completely redefine the meaning of dynamic operations. This is used intensively by dynamic languages such as IronPython and IronRuby to implement their own dynamic object models. It will also be used by APIs, e.g. by the HTML DOM to allow direct access to the object’s properties using property syntax. Plain objects Otherwise d is a standard .NET object, and the operation will be dispatched using reflection on its type and a C# “runtime binder” which implements C#’s lookup and overload resolution semantics at runtime. This is essentially a part of the C# compiler running as a runtime component to “finish the work” on dynamic operations that was deferred by the static compiler. Example Assume the following code: dynamic d1 = new Foo(); dynamic d2 = new Bar(); string s; d1.M(s, d2, 3, null); Because the receiver of the call to M is dynamic, the C# compiler does not try to resolve the meaning of the call. Instead it stashes away information for the runtime about the call. This information (often referred to as the “payload”) is essentially equivalent to: “Perform an instance method call of M with the following arguments: 1. a string 2. a dynamic 3. a literal int 3 4. a literal object null” At runtime, assume that the actual type Foo of d1 is not a COM type and does not implement IDynamicObject. In this case the C# runtime binder picks up to finish the overload resolution job based on runtime type information, proceeding as follows: 1. Reflection is used to obtain the actual runtime types of the two objects, d1 and d2, that did not have a static type (or rather had the static type dynamic). The result is Foo for d1 and Bar for d2. 2. Method lookup and overload resolution is performed on the type Foo with the call M(string,Bar,3,null) using ordinary C# semantics. 3. If the method is found it is invoked; otherwise a runtime exception is thrown. Overload resolution with dynamic arguments Even if the receiver of a method call is of a static type, overload resolution can still happen at runtime. This can happen if one or more of the arguments have the type dynamic: Foo foo = new Foo(); dynamic d = new Bar(); var result = foo.M(d); The C# runtime binder will choose between the statically known overloads of M on Foo, based on the runtime type of d, namely Bar. The result is again of type dynamic. The Dynamic Language Runtime An important component in the underlying implementation of dynamic lookup is the Dynamic Language Runtime (DLR), which is a new API in .NET 4.0. The DLR provides most of the infrastructure behind not only C# dynamic lookup but also the implementation of several dynamic programming languages on .NET, such as IronPython and IronRuby. Through this common infrastructure a high degree of interoperability is ensured, but just as importantly the DLR provides excellent caching mechanisms which serve to greatly enhance the efficiency of runtime dispatch. To the user of dynamic lookup in C#, the DLR is invisible except for the improved efficiency. However, if you want to implement your own dynamically dispatched objects, the IDynamicObject interface allows you to interoperate with the DLR and plug in your own behavior. This is a rather advanced task, which requires you to understand a good deal more about the inner workings of the DLR. For API writers, however, it can definitely be worth the trouble in order to vastly improve the usability of e.g. a library representing an inherently dynamic domain. Open issues There are a few limitations and things that might work differently than you would expect. · The DLR allows objects to be created from objects that represent classes. However, the current implementation of C# doesn’t have syntax to support this. · Dynamic lookup will not be able to find extension methods. Whether extension methods apply or not depends on the static context of the call (i.e. which using clauses occur), and this context information is not currently kept as part of the payload. · Anonymous functions (i.e. lambda expressions) cannot appear as arguments to a dynamic method call. The compiler cannot bind (i.e. “understand”) an anonymous function without knowing what type it is converted to. One consequence of these limitations is that you cannot easily use LINQ queries over dynamic objects: dynamic collection = …; var result = collection.Select(e => e + 5); If the Select method is an extension method, dynamic lookup will not find it. Even if it is an instance method, the above does not compile, because a lambda expression cannot be passed as an argument to a dynamic operation. There are no plans to address these limitations in C# 4.0. Named and Optional Arguments Named and optional parameters are really two distinct features, but are often useful together. Optional parameters allow you to omit arguments to member invocations, whereas named arguments is a way to provide an argument using the name of the corresponding parameter instead of relying on its position in the parameter list. Some APIs, most notably COM interfaces such as the Office automation APIs, are written specifically with named and optional parameters in mind. Up until now it has been very painful to call into these APIs from C#, with sometimes as many as thirty arguments having to be explicitly passed, most of which have reasonable default values and could be omitted. Even in APIs for .NET however you sometimes find yourself compelled to write many overloads of a method with different combinations of parameters, in order to provide maximum usability to the callers. Optional parameters are a useful alternative for these situations. Optional parameters A parameter is declared optional simply by providing a default value for it: public void M(int x, int y = 5, int z = 7); Here y and z are optional parameters and can be omitted in calls: M(1, 2, 3); // ordinary call of M M(1, 2); // omitting z – equivalent to M(1, 2, 7) M(1); // omitting both y and z – equivalent to M(1, 5, 7) Named and optional arguments C# 4.0 does not permit you to omit arguments between commas as in M(1,,3). This could lead to highly unreadable comma-counting code. Instead any argument can be passed by name. Thus if you want to omit only y from a call of M you can write: M(1, z: 3); // passing z by name or M(x: 1, z: 3); // passing both x and z by name or even M(z: 3, x: 1); // reversing the order of arguments All forms are equivalent, except that arguments are always evaluated in the order they appear, so in the last example the 3 is evaluated before the 1. Optional and named arguments can be used not only with methods but also with indexers and constructors. Overload resolution Named and optional arguments affect overload resolution, but the changes are relatively simple: A signature is applicable if all its parameters are either optional or have exactly one corresponding argument (by name or position) in the call which is convertible to the parameter type. Betterness rules on conversions are only applied for arguments that are explicitly given – omitted optional arguments are ignored for betterness purposes. If two signatures are equally good, one that does not omit optional parameters is preferred. M(string s, int i = 1); M(object o); M(int i, string s = “Hello”); M(int i); M(5); Given these overloads, we can see the working of the rules above. M(string,int) is not applicable because 5 doesn’t convert to string. M(int,string) is applicable because its second parameter is optional, and so, obviously are M(object) and M(int). M(int,string) and M(int) are both better than M(object) because the conversion from 5 to int is better than the conversion from 5 to object. Finally M(int) is better than M(int,string) because no optional arguments are omitted. Thus the method that gets called is M(int). Features for COM interop Dynamic lookup as well as named and optional parameters greatly improve the experience of interoperating with COM APIs such as the Office Automation APIs. In order to remove even more of the speed bumps, a couple of small COM-specific features are also added to C# 4.0. Dynamic import Many COM methods accept and return variant types, which are represented in the PIAs as object. In the vast majority of cases, a programmer calling these methods already knows the static type of a returned object from context, but explicitly has to perform a cast on the returned value to make use of that knowledge. These casts are so common that they constitute a major nuisance. In order to facilitate a smoother experience, you can now choose to import these COM APIs in such a way that variants are instead represented using the type dynamic. In other words, from your point of view, COM signatures now have occurrences of dynamic instead of object in them. This means that you can easily access members directly off a returned object, or you can assign it to a strongly typed local variable without having to cast. To illustrate, you can now say excel.Cells[1, 1].Value = "Hello"; instead of ((Excel.Range)excel.Cells[1, 1]).Value2 = "Hello"; and Excel.Range range = excel.Cells[1, 1]; instead of Excel.Range range = (Excel.Range)excel.Cells[1, 1]; Compiling without PIAs Primary Interop Assemblies are large .NET assemblies generated from COM interfaces to facilitate strongly typed interoperability. They provide great support at design time, where your experience of the interop is as good as if the types where really defined in .NET. However, at runtime these large assemblies can easily bloat your program, and also cause versioning issues because they are distributed independently of your application. The no-PIA feature allows you to continue to use PIAs at design time without having them around at runtime. Instead, the C# compiler will bake the small part of the PIA that a program actually uses directly into its assembly. At runtime the PIA does not have to be loaded. Omitting ref Because of a different programming model, many COM APIs contain a lot of reference parameters. Contrary to refs in C#, these are typically not meant to mutate a passed-in argument for the subsequent benefit of the caller, but are simply another way of passing value parameters. It therefore seems unreasonable that a C# programmer should have to create temporary variables for all such ref parameters and pass these by reference. Instead, specifically for COM methods, the C# compiler will allow you to pass arguments by value to such a method, and will automatically generate temporary variables to hold the passed-in values, subsequently discarding these when the call returns. In this way the caller sees value semantics, and will not experience any side effects, but the called method still gets a reference. Open issues A few COM interface features still are not surfaced in C#. Most notably these include indexed properties and default properties. As mentioned above these will be respected if you access COM dynamically, but statically typed C# code will still not recognize them. There are currently no plans to address these remaining speed bumps in C# 4.0. Variance An aspect of generics that often comes across as surprising is that the following is illegal: IList<string> strings = new List<string>(); IList<object> objects = strings; The second assignment is disallowed because strings does not have the same element type as objects. There is a perfectly good reason for this. If it were allowed you could write: objects[0] = 5; string s = strings[0]; Allowing an int to be inserted into a list of strings and subsequently extracted as a string. This would be a breach of type safety. However, there are certain interfaces where the above cannot occur, notably where there is no way to insert an object into the collection. Such an interface is IEnumerable<T>. If instead you say: IEnumerable<object> objects = strings; There is no way we can put the wrong kind of thing into strings through objects, because objects doesn’t have a method that takes an element in. Variance is about allowing assignments such as this in cases where it is safe. The result is that a lot of situations that were previously surprising now just work. Covariance In .NET 4.0 the IEnumerable<T> interface will be declared in the following way: public interface IEnumerable<out T> : IEnumerable { IEnumerator<T> GetEnumerator(); } public interface IEnumerator<out T> : IEnumerator { bool MoveNext(); T Current { get; } } The “out” in these declarations signifies that the T can only occur in output position in the interface – the compiler will complain otherwise. In return for this restriction, the interface becomes “covariant” in T, which means that an IEnumerable<A> is considered an IEnumerable<B> if A has a reference conversion to B. As a result, any sequence of strings is also e.g. a sequence of objects. This is useful e.g. in many LINQ methods. Using the declarations above: var result = strings.Union(objects); // succeeds with an IEnumerable<object> This would previously have been disallowed, and you would have had to to some cumbersome wrapping to get the two sequences to have the same element type. Contravariance Type parameters can also have an “in” modifier, restricting them to occur only in input positions. An example is IComparer<T>: public interface IComparer<in T> { public int Compare(T left, T right); } The somewhat baffling result is that an IComparer<object> can in fact be considered an IComparer<string>! It makes sense when you think about it: If a comparer can compare any two objects, it can certainly also compare two strings. This property is referred to as contravariance. A generic type can have both in and out modifiers on its type parameters, as is the case with the Func<…> delegate types: public delegate TResult Func<in TArg, out TResult>(TArg arg); Obviously the argument only ever comes in, and the result only ever comes out. Therefore a Func<object,string> can in fact be used as a Func<string,object>. Limitations Variant type parameters can only be declared on interfaces and delegate types, due to a restriction in the CLR. Variance only applies when there is a reference conversion between the type arguments. For instance, an IEnumerable<int> is not an IEnumerable<object> because the conversion from int to object is a boxing conversion, not a reference conversion. Also please note that the CTP does not contain the new versions of the .NET types mentioned above. In order to experiment with variance you have to declare your own variant interfaces and delegate types. COM Example Here is a larger Office automation example that shows many of the new C# features in action. using System; using System.Diagnostics; using System.Linq; using Excel = Microsoft.Office.Interop.Excel; using Word = Microsoft.Office.Interop.Word; class Program { static void Main(string[] args) { var excel = new Excel.Application(); excel.Visible = true; excel.Workbooks.Add(); // optional arguments omitted excel.Cells[1, 1].Value = "Process Name"; // no casts; Value dynamically excel.Cells[1, 2].Value = "Memory Usage"; // accessed var processes = Process.GetProcesses() .OrderByDescending(p => p.WorkingSet) .Take(10); int i = 2; foreach (var p in processes) { excel.Cells[i, 1].Value = p.ProcessName; // no casts excel.Cells[i, 2].Value = p.WorkingSet; // no casts i++; } Excel.Range range = excel.Cells[1, 1]; // no casts Excel.Chart chart = excel.ActiveWorkbook.Charts. Add(After: excel.ActiveSheet); // named and optional arguments chart.ChartWizard( Source: range.CurrentRegion, Title: "Memory Usage in " + Environment.MachineName); //named+optional chart.ChartStyle = 45; chart.CopyPicture(Excel.XlPictureAppearance.xlScreen, Excel.XlCopyPictureFormat.xlBitmap, Excel.XlPictureAppearance.xlScreen); var word = new Word.Application(); word.Visible = true; word.Documents.Add(); // optional arguments word.Selection.Paste(); } } The code is much more terse and readable than the C# 3.0 counterpart. Note especially how the Value property is accessed dynamically. This is actually an indexed property, i.e. a property that takes an argument; something which C# does not understand. However the argument is optional. Since the access is dynamic, it goes through the runtime COM binder which knows to substitute the default value and call the indexed property. Thus, dynamic COM allows you to avoid accesses to the puzzling Value2 property of Excel ranges. Relationship with Visual Basic A number of the features introduced to C# 4.0 already exist or will be introduced in some form or other in Visual Basic: · Late binding in VB is similar in many ways to dynamic lookup in C#, and can be expected to make more use of the DLR in the future, leading to further parity with C#. · Named and optional arguments have been part of Visual Basic for a long time, and the C# version of the feature is explicitly engineered with maximal VB interoperability in mind. · NoPIA and variance are both being introduced to VB and C# at the same time. VB in turn is adding a number of features that have hitherto been a mainstay of C#. As a result future versions of C# and VB will have much better feature parity, for the benefit of everyone. Resources All available resources concerning C# 4.0 can be accessed through the C# Dev Center. Specifically, this white paper and other resources can be found at the Code Gallery site. Enjoy! span.fullpost {display:none;}

Read the article
Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET

- by user647124

This year I embarked on a journey to migrate a group of ASP.NET web applications developed to integrate with WebLogic Portal 9.2 via the AquaLogic® Interaction .NET Application Accelerator 1.0 to instead use the Oracle WebCenter WSRP Producer for .NET and integrated with WebLogic Portal 10.3.4. It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings. Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there. For the Curious From the perspective of necessity, this section would be better at the end. If it were there, though, it would probably be read by far fewer people, including those that are actually interested in these types of sections. Those in a hurry may skip past and be none the worst for it in dealing with the hands-on bits of performing a migration from .NET Accelerator to WSRP Producer. For others who want to talk about why they did what they did after they did it, or just want to know for themselves, enjoy. A Brief (and edited) History of the WSRP for .NET Technologies (as Relevant to the this Post) Note: This section is for those who are curious about why the migration path is not as simple as many other Oracle technologies. You can skip this section in its entirety and still be just as competent in performing a migration as if you had read it. The currently deployed architecture that was to be migrated and upgraded achieved initial integration between .NET and J2EE over the WSRP protocol through the use of The AquaLogic Interaction .NET Application Accelerator. The .NET Accelerator allowed the applications that were written in ASP.NET and deployed on a Microsoft Internet Information Server (IIS) to interact with a WebLogic Portal application deployed on a WebLogic (J2EE application) Server (both version 9.2, the state of the art at the time of its creation). At the time this architectural decision for the application was made, both the AquaLogic and WebLogic brands were owned by BEA Systems. The AquaLogic brand included products acquired by BEA through the acquisition of Plumtree, whose flagship product was a portal platform available in both J2EE and .NET versions. As part of this dual technology support an adaptor was created to facilitate the use of WSRP as a communication protocol where customers wished to integrate components from both versions of the Plumtree portal. The adapter evolved over several product generations to include a broad array of both standard and proprietary WSRP integration capabilities. Later, BEA Systems was acquired by Oracle. Over the course of several years Oracle has acquired a large number of portal applications and has taken the strategic direction to migrate users of these myriad (and formerly competitive) products to the Oracle WebCenter technology stack. As part of Oracle’s strategic technology roadmap, older portal products are being schedule for end of life, including the portal products that were part of the BEA acquisition. The .NET Accelerator has been modified over a very long period of time with features driven by users of that product and developed under three different vendors (each a direct competitor in the same solution space prior to merger). The Oracle WebCenter WSRP Producer for .NET was introduced much more recently with the key objective to specifically address the needs of the WebCenter customers developing solutions accessible through both J2EE and .NET platforms utilizing the WSRP specifications. The Oracle Product Development Team also provides these insights on the drivers for developing the WSRP Producer: ***************************************** Support for ASP.NET AJAX. Controls using the ASP.NET AJAX script manager do not function properly in the Application Accelerator for .NET. Support 2 way SSL in WLP. This was not possible with the proxy/bridge set up in the existing Application Accelerator for .NET. Allow developers to code portlets (Web Parts) using the .NET framework rather than a proprietary framework. Developers had to use the Application Accelerator for .NET plug-ins to Visual Studio to manage preferences and profile data. This is now replaced with the .NET Framework Personalization (for preferences) and Profile providers. The WSRP Producer for .NET was created as a new way of developing .NET portlets. It was never designed to be an upgrade path for the Application Accelerator for .NET. .NET developers would create new .NET portlets with the WSRP Producer for .NET and leave any existing .NET portlets running in the Application Accelerator for .NET. ***************************************** The advantage to creating a new solution for WSRP is a product that is far easier for Oracle to maintain and support which in turn improves quality, reliability and maintainability for their customers. No changes to J2EE applications consuming the WSRP portlets previously rendered by the.NET Accelerator is required to migrate from the Aqualogic WSRP solution. For some customers using the .NET Accelerator the challenge is adapting their current .NET applications to work with the WSRP Producer (or any other WSRP adapter as they are proprietary by nature). Part of this adaptation is the need to deploy the .NET applications as a child to the WSRP producer web application as root. Differences between .NET Accelerator and WSRP Producer Note: This section is for those who are curious about why the migration is not as pluggable as something such as changing security providers in WebLogic Server. You can skip this section in its entirety and still be just as competent in performing a migration as if you had read it. The basic terminology used to describe the participating applications in a WSRP environment are the same when applied to either the .NET Accelerator or the WSRP Producer: Producer and Consumer. In both cases the .NET application serves as what is referred to as a WSRP environment as the Producer. The difference lies in how the two adapters create the WSRP translation of the .NET application. The .NET Accelerator, as the name implies, is meant to serve as a quick way of adding WSRP capability to a .NET application. As such, at a high level, the .NET Accelerator behaves as a proxy for requests between the .NET application and the WSRP Consumer. A WSRP request is sent from the consumer to the .NET Accelerator, the.NET Accelerator transforms this request into an ASP.NET request, receives the response, then transforms the response into a WSRP response. The .NET Accelerator is deployed as a stand-alone application on IIS. The WSRP Producer is deployed as a parent application on IIS and all ASP.NET modules that will be made available over WSRP are deployed as children of the WSRP Producer application. In this manner, the WSRP Producer acts more as a Request Filter than a proxy in the WSRP transactions between Producer and Consumer. Highly Recommended Enabling Logging Note: You can skip this section now, but you will most likely want to come back to it later, so why not just read it now? Logging is very helpful in tracking down the causes of any anomalies during testing of migrated portlets. To enable the WSRP Producer logging, update the Application_Start method in the Global.asax.cs for your .NET application by adding log4net.Config.XmlConfigurator.Configure(); IIS logs will usually (in a standard configuration) be in a sub folder under C:\WINDOWS\system32\LogFiles\W3SVC. WSRP Producer logs will be found at C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault\Logs\WSRPProducer.log InputTrace.webinfo and OutputTrace.webinfo are located under C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault and can be useful in debugging issues related to markup transformations. Things You Must Do Merge Web.Config Note: If you have been skipping all the sections that you can, now is the time to stop and pay attention J Because the existing .NET application will become a sub-application to the WSRP Producer, you will want to merge required settings from the existing Web.Config to the one in the WSRP Producer. Use the WSRP Producer Master Page The Master Page installed for the WSRP Producer provides common, hiddenform fields and JavaScripts to facilitate portlet instance management and display configuration when the child page is being rendered over WSRP. You add the Master Page by including it in the <@ Page declaration with MasterPageFile="~/portlets/Resources/MasterPages/WSRP.Master" . You then replace: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" > <HTML> <HEAD> With <asp:Content ID="ContentHead1" ContentPlaceHolderID="wsrphead" Runat="Server"> And </HEAD> <body> <form id="theForm" method="post" runat="server"> With </asp:Content> <asp:Content ID="ContentBody1" ContentPlaceHolderID="Main" Runat="Server"> And finally </form> </body> </HTML> With </asp:Content> In the event you already use Master Pages, adapt your existing Master Pages to be sub masters. See Nested ASP.NET Master Pages for a detailed reference of how to do this. It Happened to Me, It Might Happen to You…Or Not Watch for Use of Session or Request in OnInit In the event the .NET application being modified has pages developed to assume the user has been authenticated in an earlier page request there may be direct or indirect references in the OnInit method to request or session objects that may not have been created yet. This will vary from application to application, so the recommended approach is to test first. If there is an issue with a page running as a WSRP portlet then check for potential references in the OnInit method (including references by methods called within OnInit) to session or request objects. If there are, the simplest solution is to create a new method and then call that method once the necessary object(s) is fully available. I find doing this at the start of the Page_Load method to be the simplest solution. Case Sensitivity .NET languages are not case sensitive, but Java is. This means it is possible to have many variations of SRC= and src= or .JPG and .jpg. The preferred solution is to make these mark up instances all lower case in your .NET application. This will allow the default Rewriter rules in wsrp-producer.xml to work as is. If this is not practical, then make duplicates of any rules where an issue is occurring due to upper or mixed case usage in the .NET application markup and match the case in use with the duplicate rule. For example: <RewriterRule> <LookFor>(href=\"([^\"]+)</LookFor> <ChangeToAbsolute>true</ChangeToAbsolute> <ApplyTo>.axd,.css</ApplyTo> <MakeResource>true</MakeResource> </RewriterRule> May need to be duplicated as: <RewriterRule> <LookFor>(HREF=\"([^\"]+)</LookFor> <ChangeToAbsolute>true</ChangeToAbsolute> <ApplyTo>.axd,.css</ApplyTo> <MakeResource>true</MakeResource> </RewriterRule> While it is possible to write a regular expression that will handle mixed case usage, it would be long and strenous to test and maintain, so the recommendation is to use duplicate rules. Is it Still Relative? Some .NET applications base relative paths with a fixed root location. With the introduction of the WSRP Producer, the root has moved up one level. References to ~/ will need to be updated to ~/portlets and many ../ paths will need another ../ in front. I Can See You But I Can’t Find You This issue was first discovered while debugging modules with code that referenced the form on a page from the code-behind by name and/or id. The initial error presented itself as run-time error that was difficult to interpret over WSRP but seemed clear when run as straight ASP.NET as it indicated that the object with the form name did not exist. Since the form name was no longer valid after implementing the WSRP Master Page, the likely fix seemed to simply update the references in the code. However, as the WSRP Master Page is external to the code, a compile time error resulted: Error 155 The name 'form1' does not exist in the current context C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault\portlets\legacywebsite\module\Screens \Reporting.aspx.cs 51 52 legacywebsite.module Much hair-pulling research later it was discovered that it was the use of the FindControl method causing the issue. FindControl doesn’t work quite as expected once a Master Page has been introduced as the controls become embedded in controls, require a recursion to find them that is not part of the FindControl method. In code where the page form is referenced by name, there are two steps to the solution. First, the form needs to be referenced in code generically with Page.Form. For example, this: ToggleControl ctrl = new ToggleControl(frmManualEntry, FunctionLibrary.ParseArrayLst(userObj.Roles)); Becomes this: ToggleControl ctrl = new ToggleControl(Page.Form, FunctionLibrary.ParseArrayLst(userObj.Roles)); Generally the form id is referenced in most ASP.NET applications as a path to a control on the form. To reach the control once a MasterPage has been added requires an additional method to recurse through the controls collections within the form and find the control ID. The following method (found at Rick Strahl's Web Log) corrects this very nicely: public static Control FindControlRecursive(Control Root, string Id) { if (Root.ID == Id) return Root; foreach (Control Ctl in Root.Controls) { Control FoundCtl = FindControlRecursive(Ctl, Id); if (FoundCtl != null) return FoundCtl; } return null; } Where the form name is not referenced, simply using the FindControlRecursive method in place of FindControl will be all that is necessary. Following the second part of the example referenced earlier, the method called with Page.Form changes its value extraction code block from this: Label lblErrMsg = (Label)frmRef.FindControl("lblBRMsg" To this: Label lblErrMsg = (Label) FunctionLibrary.FindControlRecursive(frmRef, "lblBRMsg" The Master That Won’t Step Aside In most migrations it is preferable to make as few changes as possible. In one case I ran across an existing Master Page that would not function as a sub-Master Page. While it would probably have been educational to trace down why, the expedient process of updating it to take the place of the WSRP Master Page is the route I took. The changes are highlighted below: … <asp:ContentPlaceHolder ID="wsrphead" runat="server"></asp:ContentPlaceHolder> </head> <body leftMargin="0" topMargin="0"> <form id="TheForm" runat="server"> <input type="hidden" name="key" id="key" value="" /> <input type="hidden" name="formactionurl" id="formactionurl" value="" /> <input type="hidden" name="handle" id="handle" value="" /> <asp:ScriptManager ID="ScriptManager1" runat="server" EnablePartialRendering="true" > </asp:ScriptManager> This approach did not work for all existing Master Pages, but fortunately all of the other existing Master Pages I have run across worked fine as a sub-Master to the WSRP Master Page. Moving On In Enterprise Portals, even after you get everything working, the work is not finished. Next you need to get it where everyone will work with it. Migration Planning Providing that the server where IIS is running is adequately sized, it is possible to run both the .NET Accelerator and the WSRP Producer on the same server during the upgrade process. The upgrade can be performed incrementally, i.e., one portlet at a time, if server administration processes support it. Those processes would include the ability to manage a second producer in the consuming portal and to change over individual portlet instances from one provider to the other. If processes or requirements demand that all portlets be cut over at the same time, it needs to be determined if this cut over should include a new producer, updating all of the portlets in the consumer, or if the WSRP Producer portlet configuration must maintain the naming conventions used by the .NET Accelerator and simply change the WSRP end point configured in the consumer. In some enterprises it may even be necessary to maintain the same WSDL end point, at which point the IIS configuration will be where the updates occur. The downside to such a requirement is that it makes rolling back very difficult, should the need arise. Location, Location, Location Not everyone wants the web application to have the descriptively obvious wsrpdefault location, or needs to create a second WSRP site on the same server. The instructions below are from the product team and, while targeted towards making a second site, will work for creating a site with a different name and then remove the old site. You can also change just the name in IIS. Manually Creating a WSRP Producer Site Instructions (NOTE: all executables used are the same ones used by the installer and “wsrpdev” will be the name of the new instance): 1. Copy C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault to C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev. 2. Bring up a command window as an administrator 3. Run C:\Oracle\Middleware\WSRPProducerForDotNet\uninstall_resources\IISAppAccelSiteCreator.exe install WSRPProducers wsrpdev "C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev" 8678 2.0.50727 4. Run C:\Oracle\Middleware\WSRPProducerForDotNet\uninstall_resources\PermManage.exe add FileSystem C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev "NETWORK SERVICE" 3 1 5. Run C:\Oracle\Middleware\WSRPProducerForDotNet\uninstall_resources\PermManage.exe add FileSystem C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev EVERYONE 1 1 6. Open up C:\Oracle\Middleware\WSRPProducerForDotNet\wsdl\1.0\WSRPService.wsdl and replace wsrpdefault with wsrpdev 7. Open up C:\Oracle\Middleware\WSRPProducerForDotNet\wsdl\2.0\WSRPService.wsdl and replace wsrpdefault with wsrpdev Tests: 1. Bring up a browser on the host itself and go to http://localhost:8678/wsrpdev/wsdl/1.0/WSRPService.wsdl and make sure that the URLs in the XML returned include the wsrpdev changes you made in step 6. 2. Bring up a browser on the host itself and see if the default sample comes up: http://localhost:8678/wsrpdev/portlets/ASPNET_AJAX_sample/default.aspx 3. Register the producer in WLP and test the portlet. Changing the Port used by WSRP Producer The pre-configured port for the WSRP Producer is 8678. You can change this port by updating both the IIS configuration and C:\Oracle\Middleware\WSRPProducerForDotNet\[WSRP_APP_NAME]\wsdl\1.0\WSRPService.wsdl. Do You Need to Migrate? Oracle Premier Support ended in November of 2010 for AquaLogic Interaction .NET Application Accelerator 1.x and Extended Support ends in November 2012 (see http://www.oracle.com/us/support/lifetime-support/lifetime-support-software-342730.html for other related dates). This means that integration with products released after November of 2010 is not supported. If having such support is the policy within your enterprise, you do indeed need to migrate. If changes in your enterprise cause your current solution with the .NET Accelerator to no longer function properly, you may need to migrate. Migration is a choice, and if the goals of your enterprise are to take full advantage of newer technologies then migration is certainly one activity you should be planning for.

Read the article
Ajax Control Toolkit May 2012 Release

- by Stephen.Walther

I’m happy to announce the May 2012 release of the Ajax Control Toolkit. This newest release of the Ajax Control Toolkit includes a new file upload control which displays file upload progress. We’ve also added several significant enhancements to the existing HtmlEditorExtender control such as support for uploading images and Source View. You can download and start using the newest version of the Ajax Control Toolkit by entering the following command in the Library Package Manager console in Visual Studio: Install-Package AjaxControlToolkit Alternatively, you can download the latest version of the Ajax Control Toolkit from CodePlex: http://AjaxControlToolkit.CodePlex.com The New Ajax File Upload Control The most requested new feature for the Ajax Control Toolkit (according to the CodePlex Issue Tracker) has been support for file upload with progress. We worked hard over the last few months to create an entirely new file upload control which displays upload progress. Here is a sample which illustrates how you can use the new AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="01_FileUpload.aspx.cs" Inherits="WebApplication1._01_FileUpload" %> <html> <head runat="server"> <title>Simple File Upload</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager control. This control is required to use any of the controls in the Ajax Control Toolkit because this control is responsible for loading all of the scripts required by a control. The page also contains an AjaxFileUpload control. The UploadComplete event is handled in the code-behind for the page: namespace WebApplication1 { public partial class _01_FileUpload : System.Web.UI.Page { protected void ajaxUpload1_OnUploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save upload file to the file system ajaxUpload1.SaveAs(MapPath(filePath)); } } } The UploadComplete handler saves each uploaded file by calling the AjaxFileUpload control’s SaveAs() method with a full file path. Here’s a video which illustrates the process of uploading a file: Warning: in order to write to the Images folder on a production IIS server, you need Write permissions on the Images folder. You need to provide permissions for the IIS Application Pool account to write to the Images folder. To learn more, see: http://learn.iis.net/page.aspx/624/application-pool-identities/ Showing File Upload Progress The new AjaxFileUpload control takes advantage of HTML5 upload progress events (described in the XMLHttpRequest Level 2 standard). This standard is supported by Firefox 8+, Chrome 16+, Safari 5+, and Internet Explorer 10+. In other words, the standard is supported by the most recent versions of all browsers except for Internet Explorer which will support the standard with the release of Internet Explorer 10. The AjaxFileUpload control works with all browsers, even browsers which do not support the new XMLHttpRequest Level 2 standard. If you use the AjaxFileUpload control with a downlevel browser – such as Internet Explorer 9 — then you get a simple throbber image during a file upload instead of a progress indicator. Here’s how you specify a throbber image when declaring the AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="02_FileUpload.aspx.cs" Inherits="WebApplication1._02_FileUpload" %> <html> <head id="Head1" runat="server"> <title>File Upload with Throbber</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="MyThrobber" runat="server" /> <asp:Image id="MyThrobber" ImageUrl="ajax-loader.gif" Style="display:None" runat="server" /> </div> </form> </body> </html> Notice that the page above includes an image with the Id MyThrobber. This image is displayed while files are being uploaded. I use the website http://AjaxLoad.info to generate animated busy wait images. Drag-And-Drop File Upload If you are using an uplevel browser then you can drag-and-drop the files which you want to upload onto the AjaxFileUpload control. The following video illustrates how drag-and-drop works: Remember that drag-and-drop will not work on Internet Explorer 9 or older. Accepting Multiple Files By default, the AjaxFileUpload control enables you to upload multiple files at a time. When you open the file dialog, use the CTRL or SHIFT key to select multiple files. If you want to restrict the number of files that can be uploaded then use the MaximumNumberOfFiles property like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" MaximumNumberOfFiles="1" runat="server" /> In the code above, the maximum number of files which can be uploaded is restricted to a single file. Restricting Uploaded File Types You might want to allow only certain types of files to be uploaded. For example, you might want to accept only image uploads. In that case, you can use the AllowedFileTypes property to provide a list of allowed file types like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" AllowedFileTypes="jpg,jpeg,gif,png" runat="server" /> The code above prevents any files except jpeg, gif, and png files from being uploaded. Enhancements to the HTMLEditorExtender Over the past months, we spent a considerable amount of time making bug fixes and feature enhancements to the existing HtmlEditorExtender control. I want to focus on two of the most significant enhancements that we made to the control: support for Source View and support for uploading images. Adding Source View Support to the HtmlEditorExtender When you click the Source View tag, the HtmlEditorExtender changes modes and displays the HTML source of the contents contained in the TextBox being extended. You can use Source View to make fine-grain changes to HTML before submitting the HTML to the server. For reasons of backwards compatibility, the Source View tab is disabled by default. To enable Source View, you need to declare your HtmlEditorExtender with the DisplaySourceTab property like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="05_SourceView.aspx.cs" Inherits="WebApplication1._05_SourceView" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head id="Head1" runat="server"> <title>HtmlEditorExtender with Source View</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:TextBox id="txtComments" TextMode="MultiLine" Columns="60" Rows="10" Runat="server" /> <ajaxToolkit:HtmlEditorExtender id="HEE1" TargetControlID="txtComments" DisplaySourceTab="true" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager, TextBox, and HtmlEditorExtender control. The HtmlEditorExtender extends the TextBox so that it supports rich text editing. Notice that the HtmlEditorExtender includes a DisplaySourceTab property. This property causes a button to appear at the bottom of the HtmlEditorExtender which enables you to switch to Source View: Note: when using the HtmlEditorExtender, we recommend that you set the DOCTYPE for the document. Otherwise, you can encounter weird formatting issues. Accepting Image Uploads We also enhanced the HtmlEditorExtender to support image uploads (another very highly requested feature at CodePlex). The following video illustrates the experience of adding an image to the editor: Once again, for backwards compatibility reasons, support for image uploads is disabled by default. Here’s how you can declare the HtmlEditorExtender so that it supports image uploads: <ajaxToolkit:HtmlEditorExtender id="MyHtmlEditorExtender" TargetControlID="txtComments" OnImageUploadComplete="MyHtmlEditorExtender_ImageUploadComplete" DisplaySourceTab="true" runat="server" > <Toolbar> <ajaxToolkit:Bold /> <ajaxToolkit:Italic /> <ajaxToolkit:Underline /> <ajaxToolkit:InsertImage /> </Toolbar> </ajaxToolkit:HtmlEditorExtender> There are two things that you should notice about the code above. First, notice that an InsertImage toolbar button is added to the HtmlEditorExtender toolbar. This HtmlEditorExtender will render toolbar buttons for bold, italic, underline, and insert image. Second, notice that the HtmlEditorExtender includes an event handler for the ImageUploadComplete event. The code for this event handler is below: using System.Web.UI; using AjaxControlToolkit; namespace WebApplication1 { public partial class _06_ImageUpload : System.Web.UI.Page { protected void MyHtmlEditorExtender_ImageUploadComplete(object sender, AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save uploaded file to the file system var ajaxFileUpload = (AjaxFileUpload)sender; ajaxFileUpload.SaveAs(MapPath(filePath)); // Update client with saved image path e.PostedUrl = Page.ResolveUrl(filePath); } } } Within the ImageUploadComplete event handler, you need to do two things: 1) Save the uploaded image (for example, to the file system, a database, or Azure storage) 2) Provide the URL to the saved image so the image can be displayed within the HtmlEditorExtender In the code above, the uploaded image is saved to the ~/Images folder. The path of the saved image is returned to the client by setting the AjaxFileUploadEventArgs PostedUrl property. Not surprisingly, under the covers, the HtmlEditorExtender uses the AjaxFileUpload. You can get a direct reference to the AjaxFileUpload control used by an HtmlEditorExtender by using the following code: void Page_Load() { var ajaxFileUpload = MyHtmlEditorExtender.AjaxFileUpload; ajaxFileUpload.AllowedFileTypes = "jpg,jpeg"; } The code above illustrates how you can restrict the types of images that can be uploaded to the HtmlEditorExtender. This code prevents anything but jpeg images from being uploaded. Summary This was the most difficult release of the Ajax Control Toolkit to date. We iterated through several designs for the AjaxFileUpload control – with each iteration, the goal was to make the AjaxFileUpload control easier for developers to use. My hope is that we were able to create a control which Web Forms developers will find very intuitive. I want to thank the developers on the Superexpert.com team for their hard work on this release.

Read the article
CodePlex Daily Summary for Saturday, December 18, 2010

CodePlex Daily Summary for Saturday, December 18, 2010Popular ReleasesHacker Passwords: HackerPasswords.zip: Source code, executable and documentationWatchersNET.SiteMap: WatchersNET.SiteMap 01.03.03: Whats NewSkin Object: You can now filter by Terms for Example use: <object id="dnnSITEMAPSL" codetype="dotnetnuke/server" codebase="SITEMAPSL"> <param name="TaxMode" value="terms" /> <param name="TaxTerms" value="TermName1,TermName2" /> </object> changes Tax Term Filter should work correct nowSubtitleTools: SubtitleTools 1.3: - Added .srt FileAssociation & Win7 ShowRecentCategory feature. - Applied UnifiedYeKe to fix Persian search problems. - Reduced file size of Persian subtitles for uploading @OSDB.EnhSim: EnhSim 2.2.3 ALPHA: 2.2.3 ALPHAThis release adds in the changes for 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in th...Facebook C# SDK: 4.1.0: - Lots of bug fixes - Removed Dynamic Runtime Language dependencies from non-dynamic platforms. - Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample - Updated to Json.net - BREAKING CHANGE: Some renames and changes with Authorizer, CanvasAuthorizer, and Authorization action filters - BREAKING CHANGE: Renamed ApiSecret to AppSecret to be consistent with Facbeook's rename of the property - Added additional authentication helper...WCF Community Site: WCF Web APIs 10.12.17: Welcome to the second release of WCF Web APIs on codeplex Here is what is new in this release. WCF Support for jQuery - create WCF web services that are easy to consume from JavaScript clients, in particular jQuery. Better support for using JsonValue as dynamic Support for JsonValue change notification events for databinding and other purposes Support for going between JsonValue and CLR types WCF HTTP - create HTTP / REST based web services. This is a minor release which contains fixe...LiveChat Starter Kit: LCSK v1.0: This is a working version of the LCSK for Visual Studio 2010, ASP.NET MVC 3 (using Razor View Engine). this is still provider based (with 1 provider Sql) and this is still using WebService and Windows Forms operator console. The solution is cleaner, with an installer to create tables etc. Let me know your feedbackOrchard Project: Orchard 0.9: Orchard Release Notes Build: 0.9.253 Published: 12/16/2010 How to Install OrchardTo install the Orchard tech preview using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard-Using-Web-PI.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.0.9.253.zip file. The zip contents are pre-built and ready-to-run. Simply extract the contents of the Orch...SplendidCRM: SplendidCRM 5.0 Community Edition: SplendidCRM Software has adopted the GNU Affero General Public License Version 3 (AGPLv3) for its Community Edition. This release includes the full set of SQL source code in the Community Edition, something that was previously only available in the Professional and Enterprise Editions. An article on the subject of Commercial Open-Source licensing has been posted at http://www.codeproject.com/KB/architecture/splendid-guide-article6.aspx.DotSpatial: DotSpatial 12-15-2010: This release contains a few minor bug fixes and hopefully the GDAL libraries for the 3.5 x86 build actually built to the correct directory this time.DotNetNuke® Community Edition: 05.06.01 Beta: This is the initial Beta of DotNetNuke 5.6.1. See the DotNetNuke Roadmap a full list of changes in this release.MSBuild Extension Pack: December 2010: Release Blog Post The MSBuild Extension Pack December 2010 release provides a collection of over 380 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Access Control Service Samples and Documentation (Labs): Samples-R3: Contains latest ACS samples (corresponding to R3 release) that show how to integrate ACS with web services, ASP.NET websites (Web Forms and MVC) and on how to interact with the ACS Management Service. The Readmes for these samples are available here.TweetSharp: TweetSharp v2.0.0.0 - Preview 5: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous ...Silverlight Contrib: Silverlight Contrib 2010.1.0: 2010.1.0 New FeaturesCompatibility Release for Silverlight 4 and Visual Studio 2010FlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...New ProjectsAsyncSimpleDB: Async access via .Net to Amazon's SimpleDB.BCS Tester Man - The BCS Test Client: BCS Tester Man is a BCS Test Client that makes it easier for SharePoint BCS Model Developers to test Models and External Content Types. You'll no longer have to create and configure Business Data Web Parts or External Lists. It's developed in C#. UI is WPF with MVVM.Client-side Templated Script Control: Allows a developer to add a repeater-style templated list control to a web page that will be data bound client-side, and may respond to client events. The control may be data bound by a web service call on initialization, and may also have it's data source set via client code.Conquer Online Emulation: Project Emulation is a set of tools and libraries to use for creating your own 'emulation' of the servers used by Conquer Online.CSV Report Generator for SQL: C# application for exporting SQL queries into a CSV file for easy importing into Excel, Access, and any other programs that support CSV file importing. This application is handy for extraordinarily large query results that typically cause stability issues for other programs.DFTSPAB: For info see [url:http://creativx.net/forums/general-software/20760-take-ownership-set-permissions-back-up-file-all-one-utillity.html]Directories Creater: <dirCreater> create lots of directories in simple way! <c#> <vs2010>DNN Rad Tag Cloud: A module that uses Telerik's Tag Cloud control to display tags applied in a DotNetNuke install. dotFB : Facebook Graph API client library for .NET: dotFB is a facebook Graph API client library for Windows, Web and Phone Client.Ganaderia Santa Fe: RevisiónsdfsdGoogle Translate .NET: A .NET class library for the Google Translate API v2.I Wanna Make A Game: Fun project to make a 2D platformer written in C#. Written by students from the University of Waterloo, the project explores several computer science topics; from implementing a scripting language to efficient spatial computation.Neddle: Neddle is an open source, SCORM compliant learning management system (LMS) built on the .NET platform using C#.Przetwarzanie sygnalów: Program zaliczeniowy z przedmiotu "Wstep do przetwarzania obrazów i sygnalów"Quickfix message wrapper: Quickfix message strongly typed wrapper generator (T4 template) Reading List: Simple ASP .NET MVC application to manage a list of books scheduled to be read. The application queries Amazon web services for book titles to add to the list.reservierung: Project for the university for applied sciences DeggendorfRTP HTML Newsletter: This DotNetNuke module allows you to create templated HTML newsletters, and email to a specific DNN role. Newsletters are automatically archived for later access.SQL Server Master Data Services Utilities: A set of useful add-ons for SQL Server Master Data Services, including utilities for generating an MDS model, loading the model, writing a custom UI for model data and integrating the model with SharePoint BCS.testerekproject: bla bla blaTools for social network VKontakte: Tools for developing desktop applications for social network VKontakte.Virtualegis: Control de código para Virtualegis.

Read the article

Search Results

Search found 19278 results on 772 pages for 'enum support'.

Page 115/772 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >

- by braveterry

- by Wayne

- by syneticon-dj

- by dr gonzo

- by Matthias Vance

- by Mike

- by Codex

- by devoured elysium

- by 01010011

- by PeterMmm

- by sum1stolemyname

- by WPS

- by Maximus Decimus

- by db666

- by womble

- by Steve

- by JediPotPie

- by user647124

- by Stephen.Walther

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122 | Next Page >